Merge branch 'next' into for-linus

Prepare first set of updates for 3.8 merge window.

6 files changed, 177 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
new file mode 100644
index 00000000000..ead641c65e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
@@ -0,0 +1,46 @@
+* GPIO driven matrix keypad device tree bindings
+
+GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
+The matrix keypad supports multiple row and column lines, a key can be
+placed at each intersection of a unique row and a unique column. The matrix
+keypad can sense a key-press and key-release by means of GPIO lines and
+report the event using GPIO interrupts to the cpu.
+
+Required Properties:
+- compatible:		Should be "gpio-matrix-keypad"
+- row-gpios:		List of gpios used as row lines. The gpio specifier
+			for this property depends on the gpio controller to
+			which these row lines are connected.
+- col-gpios:		List of gpios used as column lines. The gpio specifier
+			for this property depends on the gpio controller to
+			which these column lines are connected.
+- linux,keymap:		The definition can be found at
+			bindings/input/matrix-keymap.txt
+
+Optional Properties:
+- linux,no-autorepeat:	do no enable autorepeat feature.
+- linux,wakeup:		use any event on keypad as wakeup event.
+- debounce-delay-ms:	debounce interval in milliseconds
+- col-scan-delay-us:	delay, measured in microseconds, that is needed
+			before we can scan keypad after activating column gpio
+
+Example:
+	matrix-keypad {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio2 25 0
+			     &gpio2 26 0
+			     &gpio2 27 0>;
+
+		col-gpios = <&gpio2 21 0
+			     &gpio2 22 0>;
+
+		linux,keymap = <0x0000008B
+				0x0100009E
+				0x02000069
+				0x0001006A
+				0x0101001C
+				0x0201006C>;
+	};
diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
new file mode 100644
index 00000000000..be332ae4f2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt
@@ -0,0 +1,7 @@
+* PWM beeper device tree bindings
+
+Registers a PWM device as beeper.
+
+Required properties:
+- compatible: should be "pwm-beeper"
+- pwms: phandle to the physical PWM device
diff --git a/Documentation/devicetree/bindings/input/stmpe-keypad.txt b/Documentation/devicetree/bindings/input/stmpe-keypad.txt
new file mode 100644
index 00000000000..1b97222e8a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/stmpe-keypad.txt
@@ -0,0 +1,39 @@
+* STMPE Keypad
+
+Required properties:
+ - compatible               : "st,stmpe-keypad"
+ - linux,keymap             : See ./matrix-keymap.txt
+
+Optional properties:
+ - debounce-interval        : Debouncing interval time in milliseconds
+ - st,scan-count            : Scanning cycles elapsed before key data is updated
+ - st,no-autorepeat         : If specified device will not autorepeat
+
+Example:
+
+	stmpe_keypad {
+		compatible = "st,stmpe-keypad";
+
+		debounce-interval = <64>;
+		st,scan-count = <8>;
+		st,no-autorepeat;
+
+		linux,keymap = <0x205006b
+				0x4010074
+				0x3050072
+				0x1030004
+				0x502006a
+				0x500000a
+				0x5008b
+				0x706001c
+				0x405000b
+				0x6070003
+				0x3040067
+				0x303006c
+				0x60400e7
+				0x602009e
+				0x4020073
+				0x5050002
+				0x4030069
+				0x3020008>;
+	};
diff --git a/Documentation/devicetree/bindings/input/tca8418_keypad.txt b/Documentation/devicetree/bindings/input/tca8418_keypad.txt
new file mode 100644
index 00000000000..2a1538f0053
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/tca8418_keypad.txt
@@ -0,0 +1,8 @@
+
+Required properties:
+- compatible: "ti,tca8418"
+- reg: the I2C address
+- interrupts: IRQ line number, should trigger on falling edge
+- keypad,num-rows: The number of rows
+- keypad,num-columns: The number of columns
+- linux,keymap: Keys definitions, see keypad-matrix.
diff --git a/Documentation/devicetree/bindings/input/touchscreen/mms114.txt b/Documentation/devicetree/bindings/input/touchscreen/mms114.txt
new file mode 100644
index 00000000000..89d4c56c567
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/mms114.txt
@@ -0,0 +1,34 @@
+* MELFAS MMS114 touchscreen controller
+
+Required properties:
+- compatible: must be "melfas,mms114"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- x-size: horizontal resolution of touchscreen
+- y-size: vertical resolution of touchscreen
+
+Optional properties:
+- contact-threshold:
+- moving-threshold:
+- x-invert: invert X axis
+- y-invert: invert Y axis
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		touchscreen@48 {
+			compatible = "melfas,mms114";
+			reg = <0x48>;
+			interrupts = <39 0>;
+			x-size = <720>;
+			y-size = <1280>;
+			contact-threshold = <10>;
+			moving-threshold = <10>;
+			x-invert;
+			y-invert;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
new file mode 100644
index 00000000000..127baa31a77
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
@@ -0,0 +1,43 @@
+STMPE Touchscreen
+----------------
+
+Required properties:
+ - compatible: "st,stmpe-ts"
+
+Optional properties:
+- st,sample-time: ADC converstion time in number of clock.  (0 -> 36 clocks, 1 ->
+  44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6
+  -> 144 clocks), recommended is 4.
+- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
+- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external
+  reference)
+- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
+- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4
+  samples, 3 -> 8 samples)
+- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 ->
+  100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended
+  is 3
+- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3
+  -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2
+- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of
+  the fractional part) recommended is 7
+- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35
+  mA max, 1 -> 50 mA typical 80 mA max)
+
+Node name must be stmpe_touchscreen and should be child node of stmpe node to
+which it belongs.
+
+Example:
+
+	stmpe_touchscreen {
+		compatible = "st,stmpe-ts";
+		st,sample-time = <4>;
+		st,mod-12b = <1>;
+		st,ref-sel = <0>;
+		st,adc-freq = <1>;
+		st,ave-ctrl = <1>;
+		st,touch-det-delay = <2>;
+		st,settling = <2>;
+		st,fraction-z = <7>;
+		st,i-drive = <1>;
+	};