dt: bindings: move SEC node under new crypto/

Since technically it's not powerpc arch-specific.  Also rename it sec2
to differentiate it from its incompatible successor, the SEC 4.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

1 files changed, 0 insertions, 68 deletions

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/sec.txt b/Documentation/devicetree/bindings/powerpc/fsl/sec.txt
deleted file mode 100644
index 2b6f2d45c45..00000000000
--- a/Documentation/devicetree/bindings/powerpc/fsl/sec.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-Freescale SoC SEC Security Engines
-
-Required properties:
-
-- compatible : Should contain entries for this and backward compatible
-  SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0"
-- reg : Offset and length of the register set for the device
-- interrupts : the SEC's interrupt number
-- fsl,num-channels : An integer representing the number of channels
-  available.
-- fsl,channel-fifo-len : An integer representing the number of
-  descriptor pointers each channel fetch fifo can hold.
-- fsl,exec-units-mask : The bitmask representing what execution units
-  (EUs) are available. It's a single 32-bit cell. EU information
-  should be encoded following the SEC's Descriptor Header Dword
-  EU_SEL0 field documentation, i.e. as follows:
-
-	bit 0  = reserved - should be 0
-	bit 1  = set if SEC has the ARC4 EU (AFEU)
-	bit 2  = set if SEC has the DES/3DES EU (DEU)
-	bit 3  = set if SEC has the message digest EU (MDEU/MDEU-A)
-	bit 4  = set if SEC has the random number generator EU (RNG)
-	bit 5  = set if SEC has the public key EU (PKEU)
-	bit 6  = set if SEC has the AES EU (AESU)
-	bit 7  = set if SEC has the Kasumi EU (KEU)
-	bit 8  = set if SEC has the CRC EU (CRCU)
-	bit 11 = set if SEC has the message digest EU extended alg set (MDEU-B)
-
-remaining bits are reserved for future SEC EUs.
-
-- fsl,descriptor-types-mask : The bitmask representing what descriptors
-  are available. It's a single 32-bit cell. Descriptor type information
-  should be encoded following the SEC's Descriptor Header Dword DESC_TYPE
-  field documentation, i.e. as follows:
-
-	bit 0  = set if SEC supports the aesu_ctr_nonsnoop desc. type
-	bit 1  = set if SEC supports the ipsec_esp descriptor type
-	bit 2  = set if SEC supports the common_nonsnoop desc. type
-	bit 3  = set if SEC supports the 802.11i AES ccmp desc. type
-	bit 4  = set if SEC supports the hmac_snoop_no_afeu desc. type
-	bit 5  = set if SEC supports the srtp descriptor type
-	bit 6  = set if SEC supports the non_hmac_snoop_no_afeu desc.type
-	bit 7  = set if SEC supports the pkeu_assemble descriptor type
-	bit 8  = set if SEC supports the aesu_key_expand_output desc.type
-	bit 9  = set if SEC supports the pkeu_ptmul descriptor type
-	bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type
-	bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type
-
-  ..and so on and so forth.
-
-Optional properties:
-
-- interrupt-parent : the phandle for the interrupt controller that
-  services interrupts for this device.
-
-Example:
-
-	/* MPC8548E */
-	crypto@30000 {
-		compatible = "fsl,sec2.1", "fsl,sec2.0";
-		reg = <0x30000 0x10000>;
-		interrupts = <29 2>;
-		interrupt-parent = <&mpic>;
-		fsl,num-channels = <4>;
-		fsl,channel-fifo-len = <24>;
-		fsl,exec-units-mask = <0xfe>;
-		fsl,descriptor-types-mask = <0x12b0ebf>;
-	};