ASoC: Davinci: McASP: add device tree support for McASP

Add device tree probe for McASP driver.

Note:
DMA parameters are not populated from DT and will be done later.

Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

1 files changed, 44 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
new file mode 100644
index 00000000000..e6148eca294
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
@@ -0,0 +1,44 @@
+Texas Instruments McASP controller
+
+Required properties:
+- compatible :
+	"ti,dm646x-mcasp-audio"	: for DM646x platforms
+	"ti,da830-mcasp-audio"	: for both DA830 & DA850 platforms
+
+- reg : Should contain McASP registers offset and length
+- interrupts : Interrupt number for McASP
+- op-mode : I2S/DIT ops mode.
+- tdm-slots : Slots for TDM operation.
+- num-serializer : Serializers used by McASP.
+- serial-dir : A list of serializer pin mode. The list number should be equal
+		to "num-serializer" parameter. Each entry is a number indication
+		serializer pin direction. (0 - INACTIVE, 1 - TX, 2 - RX)
+
+
+Optional properties:
+
+- ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0
+- tx-num-evt : FIFO levels.
+- rx-num-evt : FIFO levels.
+- sram-size-playback : size of sram to be allocated during playback
+- sram-size-capture  : size of sram to be allocated during capture
+
+Example:
+
+mcasp0: mcasp0@1d00000 {
+	compatible = "ti,da830-mcasp-audio";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x100000 0x3000>;
+	interrupts = <82 83>;
+	op-mode = <0>;		/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	num-serializer = <16>;
+	serial-dir = <
+			0 0 0 0	/* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 0 0
+			0 0 0 1
+			2 0 0 0 >;
+	tx-num-evt = <1>;
+	rx-num-evt = <1>;
+};