diff options
| author | Mark Brown <broonie@linaro.org> | 2013-08-09 11:41:56 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-08-12 12:20:26 -0700 |
| commit | 5bdd1f4a1daf398042203b72430891dfc40c0fa6 (patch) | |
| tree | ac7e445c211430efda88b436851d0cb3cc508e29 /Documentation/devicetree/bindings/usb/usb3503.txt | |
| parent | e5a0c874ec7babc1931a67489b292de152d2a641 (diff) | |
usb: misc: usb3503: Add USB3503A to the compatible list
There are no software visible differences that I am aware of but in case
any are discovered allow the DTS to specify exactly which device is
present.
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'Documentation/devicetree/bindings/usb/usb3503.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/usb/usb3503.txt | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt index 8c5be48b43c..cd60f7e4eb5 100644 --- a/Documentation/devicetree/bindings/usb/usb3503.txt +++ b/Documentation/devicetree/bindings/usb/usb3503.txt @@ -1,7 +1,7 @@ SMSC USB3503 High-Speed Hub Controller Required properties: -- compatible: Should be "smsc,usb3503". +- compatible: Should be "smsc,usb3503" or "smsc,usb3503a". - reg: Specifies the i2c slave address, it should be 0x08. - connect-gpios: Should specify GPIO for connect. - disabled-ports: Should specify the ports unused. |