Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver specific changes from Arnd Bergmann:
 "These changes are all driver specific and cross over between arm-soc
  contents and some other subsystem, in these cases cpufreq, crypto,
  dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have
  these changes merged through arm-soc.

  As we proceed to untangle the dependencies between platform code and
  driver code, the amount of changes in this category is fortunately
  shrinking, for 3.11 we have 16 branches here and 101 non-merge
  changesets, the majority of which are for the stedma40 dma engine
  driver used in the ux500 platform.  Cleaning up that code touches
  multiple subsystems, but gets rid of the dependency in the end.

  The mailbox code moved out from mach-omap2 to drivers/mailbox is an
  intermediate step and is still omap specific at the moment.  Patches
  exist to generalize the subsystem and add other drivers with the same
  API, but those did not make it for 3.11."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
  crypto: ux500: use dmaengine_submit API
  crypto: ux500: use dmaengine_prep_slave_sg API
  crypto: ux500: use dmaengine_device_control API
  crypto: ux500/crypt: add missing __iomem qualifiers
  crypto: ux500/hash: add missing static qualifiers
  crypto: ux500/hash: use readl on iomem addresses
  dmaengine: ste_dma40: Declare memcpy config as static
  ARM: ux500: Remove mop500_snowball_ethernet_clock_enable()
  ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO
  ARM: ux500: Provide a AB8500 GPIO Device Tree node
  gpio: rcar: fix gpio_rcar_of_table
  gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
  gpio-rcar: Reference core gpio documentation in the DT bindings
  clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
  ARM: dts: Update Samsung I2S documentation
  ARM: dts: add clock provider information for i2s controllers in Exynos5250
  ARM: dts: add Exynos audio subsystem clock controller node
  clk: samsung: register audio subsystem clocks using common clock framework
  ARM: dts: use #include for all device trees for Samsung
  pinctrl: s3c24xx: use correct header for chained_irq functions
  ...

2 files changed, 132 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index 60bd2150a3e..55f51af08bc 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -47,3 +47,85 @@ usb1: gadget@fffa4000 {
 	interrupts = <10 4>;
 	atmel,vbus-gpio = <&pioC 5 0>;
 };
+
+Atmel High-Speed USB device controller
+
+Required properties:
+ - compatible: Should be "atmel,at91sam9rl-udc"
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain usba interrupt
+ - ep childnode: To specify the number of endpoints and their properties.
+
+Optional properties:
+ - atmel,vbus-gpio: If present, specifies a gpio that needs to be
+   activated for the bus to be powered.
+
+Required child node properties:
+ - name: Name of the endpoint.
+ - reg: Num of the endpoint.
+ - atmel,fifo-size: Size of the fifo.
+ - atmel,nb-banks: Number of banks.
+ - atmel,can-dma: Boolean to specify if the endpoint support DMA.
+ - atmel,can-isoc: Boolean to specify if the endpoint support ISOC.
+
+usb2: gadget@fff78000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "atmel,at91sam9rl-udc";
+	reg = <0x00600000 0x80000
+	       0xfff78000 0x400>;
+	interrupts = <27 4 0>;
+	atmel,vbus-gpio = <&pioB 19 0>;
+
+	ep0 {
+		reg = <0>;
+		atmel,fifo-size = <64>;
+		atmel,nb-banks = <1>;
+	};
+
+	ep1 {
+		reg = <1>;
+		atmel,fifo-size = <1024>;
+		atmel,nb-banks = <2>;
+		atmel,can-dma;
+		atmel,can-isoc;
+	};
+
+	ep2 {
+		reg = <2>;
+		atmel,fifo-size = <1024>;
+		atmel,nb-banks = <2>;
+		atmel,can-dma;
+		atmel,can-isoc;
+	};
+
+	ep3 {
+		reg = <3>;
+		atmel,fifo-size = <1024>;
+		atmel,nb-banks = <3>;
+		atmel,can-dma;
+	};
+
+	ep4 {
+		reg = <4>;
+		atmel,fifo-size = <1024>;
+		atmel,nb-banks = <3>;
+		atmel,can-dma;
+	};
+
+	ep5 {
+		reg = <5>;
+		atmel,fifo-size = <1024>;
+		atmel,nb-banks = <3>;
+		atmel,can-dma;
+		atmel,can-isoc;
+	};
+
+	ep6 {
+		reg = <6>;
+		atmel,fifo-size = <1024>;
+		atmel,nb-banks = <3>;
+		atmel,can-dma;
+		atmel,can-isoc;
+	};
+};
diff --git a/Documentation/devicetree/bindings/usb/ux500-usb.txt b/Documentation/devicetree/bindings/usb/ux500-usb.txt
new file mode 100644
index 00000000000..330d6ec1540
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ux500-usb.txt
@@ -0,0 +1,50 @@
+Ux500 MUSB
+
+Required properties:
+ - compatible : Should be "stericsson,db8500-musb"
+ - reg        : Offset and length of registers
+ - interrupts : Interrupt; mode, number and trigger
+ - dr_mode    : Dual-role; either host mode "host", peripheral mode "peripheral"
+                or both "otg"
+
+Optional properties:
+ - dmas       : A list of dma channels;
+                dma-controller, event-line, fixed-channel, flags
+ - dma-names  : An ordered list of channel names affiliated to the above
+
+Example:
+
+usb_per5@a03e0000 {
+	compatible = "stericsson,db8500-musb", "mentor,musb";
+	reg = <0xa03e0000 0x10000>;
+	interrupts = <0 23 0x4>;
+	interrupt-names = "mc";
+
+	dr_mode = "otg";
+
+	dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
+	       <&dma 38 0 0x0>, /* Logical - MemToDev */
+	       <&dma 37 0 0x2>, /* Logical - DevToMem */
+	       <&dma 37 0 0x0>, /* Logical - MemToDev */
+	       <&dma 36 0 0x2>, /* Logical - DevToMem */
+	       <&dma 36 0 0x0>, /* Logical - MemToDev */
+	       <&dma 19 0 0x2>, /* Logical - DevToMem */
+	       <&dma 19 0 0x0>, /* Logical - MemToDev */
+	       <&dma 18 0 0x2>, /* Logical - DevToMem */
+	       <&dma 18 0 0x0>, /* Logical - MemToDev */
+	       <&dma 17 0 0x2>, /* Logical - DevToMem */
+	       <&dma 17 0 0x0>, /* Logical - MemToDev */
+	       <&dma 16 0 0x2>, /* Logical - DevToMem */
+	       <&dma 16 0 0x0>, /* Logical - MemToDev */
+	       <&dma 39 0 0x2>, /* Logical - DevToMem */
+	       <&dma 39 0 0x0>; /* Logical - MemToDev */
+
+	dma-names = "iep_1_9",  "oep_1_9",
+		    "iep_2_10", "oep_2_10",
+		    "iep_3_11", "oep_3_11",
+		    "iep_4_12", "oep_4_12",
+		    "iep_5_13", "oep_5_13",
+		    "iep_6_14", "oep_6_14",
+		    "iep_7_15", "oep_7_15",
+		    "iep_8",    "oep_8";
+};