Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "Most of this branch consists of updates, additions and general churn
  of the device tree source files in the kernel (arch/arm/boot/dts).
  Besides that, there are a few things to point out:

   - Lots of platform conversion on OMAP2+, with removal of old board
     files for various platforms.
   - Final conversion of a bunch of ux500 (ST-Ericsson) platforms as
     well
   - Some updates to pinctrl and other subsystems.  Most of these are
     for DT-enablement of the various platforms and acks have been
     collected"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (385 commits)
  ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts
  ARM: dts: bcm: Add missing UARTs for bcm11351 (bcm281xx)
  ARM: dts: bcm281xx: Add card detect GPIO
  ARM: dts: rename ARCH_BCM to ARCH_BCM_MOBILE (dt)
  ARM: bcm281xx: Add device node for the GPIO controller
  ARM: mvebu: Add Netgear ReadyNAS 104 board
  ARM: tegra: fix Tegra114 IOMMU register address
  ARM: kirkwood: add support for OpenBlocks A7 platform
  ARM: dts: omap4-panda: add DPI pinmuxing
  ARM: dts: AM33xx: Add RNG node
  ARM: dts: AM33XX: Add hwspinlock node
  ARM: dts: OMAP5: Add hwspinlock node
  ARM: dts: OMAP4: Add hwspinlock node
  ARM: dts: use 'status' property for PCIe nodes
  ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C
  ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes
  ARM: dts: sirf: add missed graphics2d iobg in atlas6 dts
  ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dts
  ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts
  ARM: mvebu: Add the core-divider clock to Armada 370/XP
  ...

2 files changed, 17 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
index 323983be3c3..50decf8e1b9 100644
--- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt
+++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
@@ -12,7 +12,19 @@ Required properties:
 	a) phandle of the gpio controller node.
 	b) pin number within the gpio controller.
 	c) optional flags and pull up/down.
-
+- clocks: list of clock IDs from SoC clock driver.
+	a) hdmi: Gate of HDMI IP bus clock.
+	b) sclk_hdmi: Gate of HDMI special clock.
+	c) sclk_pixel: Pixel special clock, one of the two possible inputs of
+		HDMI clock mux.
+	d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of
+		HDMI clock mux.
+	e) mout_hdmi: It is required by the driver to switch between the 2
+		parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
+		after configuration, parent is set to sclk_hdmiphy else
+		sclk_pixel.
+- clock-names: aliases as per driver requirements for above clock IDs:
+	"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
 Example:
 
 	hdmi {
diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt
index 3334b0a8e34..7bfde9c9d65 100644
--- a/Documentation/devicetree/bindings/video/exynos_mixer.txt
+++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt
@@ -10,6 +10,10 @@ Required properties:
 - reg: physical base address of the mixer and length of memory mapped
 	region.
 - interrupts: interrupt number to the cpu.
+- clocks: list of clock IDs from SoC clock driver.
+	a) mixer: Gate of Mixer IP bus clock.
+	b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of
+               mixer mux.
 
 Example: