Merge tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux

Pull devicetree changes from Grant Likely:
 "Lots of activity in the devicetree code for v3.18.  Most of it is
  related to getting all of the overlay support code in place, but there
  are other important things in there.

  Highlights:

   - OF_RECONFIG notifiers for SPI, I2C and Platform devices.  Those
     subsystems can now respond to live changes to the device tree.

   - CONFIG_OF_OVERLAY method for applying live changes to the device
     tree

   - Removal of the of_allnodes list.  This used to be used to iterate
     over all the nodes in the device tree, but it is unnecessary
     because the same thing can be done by iterating over the list of
     child pointers.  Getting rid of of_allnodes saves some memory and
     avoids the possibility of of_allnodes being sorted differently from
     the child lists.

   - Support for retrieving original DTB blob via sysfs.  Needed by
     kexec.

   - More unittests

   - Documentation and minor bug fixes"

* tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: (42 commits)
  of: Delete unnecessary check before calling "of_node_put()"
  of: Drop ->next pointer from struct device_node
  spi: Check for spi_of_notifier when CONFIG_OF_DYNAMIC=y
  of: support passing console options with stdout-path
  of: add optional options parameter to of_find_node_by_path()
  of: Add bindings for chosen node, stdout-path
  of: Remove unneeded and incorrect MODULE_DEVICE_TABLE
  ARM: dt: fix up PL011 device tree bindings
  of: base, fix of_property_read_string_helper kernel-doc
  of: remove select of non-existant OF_DEVICE config symbol
  spi/of: Add OF notifier handler
  spi/of: Create new device registration method and accessors
  i2c/of: Add OF_RECONFIG notifier handler
  i2c/of: Factor out Devicetree registration code
  of/overlay: Add overlay unittests
  of/overlay: Introduce DT overlay support
  of/reconfig: Add OF_DYNAMIC notifier for platform_bus_type
  of/reconfig: Always use the same structure for notifiers
  of/reconfig: Add debug output for OF_RECONFIG notifiers
  of/reconfig: Add empty stubs for the of_reconfig methods
  ...

3 files changed, 85 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
new file mode 100644
index 00000000000..ed838f453f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/chosen.txt
@@ -0,0 +1,46 @@
+The chosen node
+---------------
+
+The chosen node does not represent a real device, but serves as a place
+for passing data between firmware and the operating system, like boot
+arguments. Data in the chosen node does not represent the hardware.
+
+
+stdout-path property
+--------------------
+
+Device trees may specify the device to be used for boot console output
+with a stdout-path property under /chosen, as described in ePAPR, e.g.
+
+/ {
+	chosen {
+		stdout-path = "/serial@f00:115200";
+	};
+
+	serial@f00 {
+		compatible = "vendor,some-uart";
+		reg = <0xf00 0x10>;
+	};
+};
+
+If the character ":" is present in the value, this terminates the path.
+The meaning of any characters following the ":" is device-specific, and
+must be specified in the relevant binding documentation.
+
+For UART devices, the preferred binding is a string in the form:
+
+	<baud>{<parity>{<bits>{<flow>}}}
+
+where
+
+	baud	- baud rate in decimal
+	parity	- 'n' (none), 'o', (odd) or 'e' (even)
+	bits	- number of data bits
+	flow	- 'r' (rts)
+
+For example: 115200n8r
+
+Implementation note: Linux will look for the property "linux,stdout-path" or
+on PowerPC "stdout" if "stdout-path" is not found.  However, the
+"linux,stdout-path" and "stdout" properties are deprecated. New platforms
+should only use the "stdout-path" property.
diff --git a/Documentation/devicetree/bindings/serial/pl011.txt b/Documentation/devicetree/bindings/serial/pl011.txt
index 5d2e840ae65..52464918cfe 100644
--- a/Documentation/devicetree/bindings/serial/pl011.txt
+++ b/Documentation/devicetree/bindings/serial/pl011.txt
@@ -6,12 +6,34 @@ Required properties:
 - interrupts: exactly one interrupt specifier
 
 Optional properties:
-- pinctrl: When present, must have one state named "sleep"
-	   and one state named "default"
-- clocks:  When present, must refer to exactly one clock named
+- pinctrl: When present, must have one state named "default",
+	   and may contain a second name named "sleep". The former
+	   state sets up pins for ordinary operation whereas
+	   the latter state will put the associated pins to sleep
+	   when the UART is unused
+- clocks:  When present, the first clock listed must correspond to
+	   the clock named UARTCLK on the IP block, i.e. the clock
+	   to the external serial line, whereas the second clock
+	   must correspond to the PCLK clocking the internal logic
+	   of the block. Just listing one clock (the first one) is
+	   deprecated.
+- clocks-names: When present, the first clock listed must be named
+	   "uartclk" and the second clock listed must be named
 	   "apb_pclk"
 - dmas:	   When present, may have one or two dma channels.
 	   The first one must be named "rx", the second one
 	   must be named "tx".
 
 See also bindings/arm/primecell.txt
+
+Example:
+
+uart@80120000 {
+	compatible = "arm,pl011", "arm,primecell";
+	reg = <0x80120000 0x1000>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+	dmas = <&dma 13 0 0x2>, <&dma 13 0 0x0>;
+	dma-names = "rx", "tx";
+	clocks = <&foo_clk>, <&bar_clk>;
+	clock-names = "uartclk", "apb_pclk";
+};
diff --git a/Documentation/devicetree/bindings/unittest.txt b/Documentation/devicetree/bindings/unittest.txt
new file mode 100644
index 00000000000..0f92a22fddf
--- /dev/null
+++ b/Documentation/devicetree/bindings/unittest.txt
@@ -0,0 +1,14 @@
+* OF selftest platform device
+
+** selftest
+
+Required properties:
+- compatible: must be "selftest"
+
+All other properties are optional.
+
+Example:
+	selftest {
+		compatible = "selftest";
+		status = "okay";
+	};