Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is an unusually large pull request for MIPS - in parts because
  lots of patches missed the 3.18 deadline but primarily because some
  folks opened the flood gates.

   - Retire the MIPS-specific phys_t with the generic phys_addr_t.
   - Improvments for the backtrace code used by oprofile.
   - Better backtraces on SMP systems.
   - Cleanups for the Octeon platform code.
   - Cleanups and fixes for the Loongson platform code.
   - Cleanups and fixes to the firmware library.
   - Switch ATH79 platform to use the firmware library.
   - Grand overhault to the SEAD3 and Malta interrupt code.
   - Move the GIC interrupt code to drivers/irqchip
   - Lots of GIC cleanups and updates to the GIC code to use modern IRQ
     infrastructures and features of the kernel.
   - OF documentation updates for the GIC bindings
   - Move GIC clocksource driver to drivers/clocksource
   - Merge GIC clocksource driver with clockevent driver.
   - Further updates to bring the GIC clocksource driver up to date.
   - R3000 TLB code cleanups
   - Improvments to the Loongson 3 platform code.
   - Convert pr_warning to pr_warn.
   - Merge a bunch of small lantiq and ralink fixes that have been
     staged/lingering inside the openwrt tree for a while.
   - Update archhelp for IP22/IP32
   - Fix a number of issues for Loongson 1B.
   - New clocksource and clockevent driver for Loongson 1B.
   - Further work on clk handling for Loongson 1B.
   - Platform work for Broadcom BMIPS.
   - Error handling cleanups for TurboChannel.
   - Fixes and optimization to the microMIPS support.
   - Option to disable the FTLB.
   - Dump more relevant information on machine check exception
   - Change binfmt to allow arch to examine PT_*PROC headers
   - Support for new style FPU register model in O32
   - VDSO randomization.
   - BCM47xx cleanups
   - BCM47xx reimplement the way the kernel accesses NVRAM information.
   - Random cleanups
   - Add support for ATH25 platforms
   - Remove pointless locking code in some PCI platforms.
   - Some improvments to EVA support
   - Minor Alchemy cleanup"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits)
  MIPS: Add MFHC0 and MTHC0 instructions to uasm.
  MIPS: Cosmetic cleanups of page table headers.
  MIPS: Add CP0 macros for extended EntryLo registers
  MIPS: Remove now unused definition of phys_t.
  MIPS: Replace use of phys_t with phys_addr_t.
  MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT
  PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig.
  MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery
  MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO
  MIPS: <asm/types.h> fix indentation.
  MAINTAINERS: Add entry for BMIPS multiplatform kernel
  MIPS: Enable VDSO randomization
  MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration
  MIPS: Remove declaration of obsolete arch_init_clk_ops()
  MIPS: atomic.h: Reformat to fit in 79 columns
  MIPS: Apply `.insn' to fixup labels throughout
  MIPS: Fix microMIPS LL/SC immediate offsets
  MIPS: Kconfig: Only allow 32-bit microMIPS builds
  MIPS: signal.c: Fix an invalid cast in ISA mode bit handling
  MIPS: mm: Only build one microassembler that is suitable
  ...

7 files changed, 125 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
new file mode 100644
index 00000000000..5a65478e5d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
@@ -0,0 +1,55 @@
+MIPS Global Interrupt Controller (GIC)
+
+The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
+It also supports local (per-processor) interrupts and software-generated
+interrupts which can be used as IPIs.  The GIC also includes a free-running
+global timer, per-CPU count/compare timers, and a watchdog.
+
+Required properties:
+- compatible : Should be "mti,gic".
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt specifier.  Should be 3.
+  - The first cell is the type of interrupt, local or shared.
+    See <include/dt-bindings/interrupt-controller/mips-gic.h>.
+  - The second cell is the GIC interrupt number.
+  - The third cell encodes the interrupt flags.
+    See <include/dt-bindings/interrupt-controller/irq.h> for a list of valid
+    flags.
+
+Optional properties:
+- reg : Base address and length of the GIC registers.  If not present,
+  the base address reported by the hardware GCR_GIC_BASE will be used.
+- mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors
+  to which the GIC may not route interrupts.  Valid values are 2 - 7.
+  This property is ignored if the CPU is started in EIC mode.
+
+Required properties for timer sub-node:
+- compatible : Should be "mti,gic-timer".
+- interrupts : Interrupt for the GIC local timer.
+- clock-frequency : Clock frequency at which the GIC timers operate.
+
+Example:
+
+	gic: interrupt-controller@1bdc0000 {
+		compatible = "mti,gic";
+		reg = <0x1bdc0000 0x20000>;
+
+		interrupt-controller;
+		#interrupt-cells = <3>;
+
+		mti,reserved-cpu-vectors = <7>;
+
+		timer {
+			compatible = "mti,gic-timer";
+			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	uart@18101400 {
+		...
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+		...
+	};
diff --git a/Documentation/devicetree/bindings/mips/brcm/bcm3384-intc.txt b/Documentation/devicetree/bindings/mips/brcm/bcm3384-intc.txt
new file mode 100644
index 00000000000..d4e0141d362
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/brcm/bcm3384-intc.txt
@@ -0,0 +1,37 @@
+* Interrupt Controller
+
+Properties:
+- compatible: "brcm,bcm3384-intc"
+
+  Compatibility with BCM3384 and possibly other BCM33xx/BCM63xx SoCs.
+
+- reg: Address/length pairs for each mask/status register set.  Length must
+  be 8.  If multiple register sets are specified, the first set will
+  handle IRQ offsets 0..31, the second set 32..63, and so on.
+
+- interrupt-controller: This is an interrupt controller.
+
+- #interrupt-cells: Must be <1>.  Just a simple IRQ offset; no level/edge
+  or polarity configuration is possible with this controller.
+
+- interrupt-parent: This controller is cascaded from a MIPS CPU HW IRQ, or
+  from another INTC.
+
+- interrupts: The IRQ on the parent controller.
+
+Example:
+	periph_intc: periph_intc@14e00038 {
+		compatible = "brcm,bcm3384-intc";
+
+		/*
+		 * IRQs 0..31:  mask reg 0x14e00038, status reg 0x14e0003c
+		 * IRQs 32..63: mask reg 0x14e00340, status reg 0x14e00344
+		 */
+		reg = <0x14e00038 0x8 0x14e00340 0x8>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpu_intc>;
+		interrupts = <4>;
+	};
diff --git a/Documentation/devicetree/bindings/mips/brcm/bmips.txt b/Documentation/devicetree/bindings/mips/brcm/bmips.txt
new file mode 100644
index 00000000000..8ef71b4085c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/brcm/bmips.txt
@@ -0,0 +1,8 @@
+* Broadcom MIPS (BMIPS) CPUs
+
+Required properties:
+- compatible: "brcm,bmips3300", "brcm,bmips4350", "brcm,bmips4380",
+  "brcm,bmips5000"
+
+- mips-hpt-frequency: This is common to all CPUs in the system so it lives
+  under the "cpus" node.
diff --git a/Documentation/devicetree/bindings/mips/brcm/cm-dsl.txt b/Documentation/devicetree/bindings/mips/brcm/cm-dsl.txt
new file mode 100644
index 00000000000..8a139cb3c0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/brcm/cm-dsl.txt
@@ -0,0 +1,11 @@
+* Broadcom cable/DSL platforms
+
+SoCs:
+
+Required properties:
+- compatible: "brcm,bcm3384", "brcm,bcm33843"
+
+Boards:
+
+Required properties:
+- compatible: "brcm,bcm93384wvg"
diff --git a/Documentation/devicetree/bindings/mips/brcm/usb.txt b/Documentation/devicetree/bindings/mips/brcm/usb.txt
new file mode 100644
index 00000000000..452c45c7bf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/brcm/usb.txt
@@ -0,0 +1,11 @@
+* Broadcom USB controllers
+
+Required properties:
+- compatible: "brcm,bcm3384-ohci", "brcm,bcm3384-ehci"
+
+  These currently use the generic-ohci and generic-ehci drivers.  On some
+  systems, special handling may be needed in the following cases:
+
+  - Restoring state after systemwide power save modes
+  - Sharing PHYs with the USBD (UDC) hardware
+  - Figuring out which controllers are disabled on ASIC bondout variants
diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt b/Documentation/devicetree/bindings/mips/cpu_irq.txt
index 13aa4b62c62..fc149f326da 100644
--- a/Documentation/devicetree/bindings/mips/cpu_irq.txt
+++ b/Documentation/devicetree/bindings/mips/cpu_irq.txt
@@ -1,6 +1,6 @@
 MIPS CPU interrupt controller
 
-On MIPS the mips_cpu_intc_init() helper can be used to initialize the 8 CPU
+On MIPS the mips_cpu_irq_of_init() helper can be used to initialize the 8 CPU
 IRQs from a devicetree file and create a irq_domain for IRQ controller.
 
 With the irq_domain in place we can describe how the 8 IRQs are wired to the
@@ -36,7 +36,7 @@ Example devicetree:
 
 Example platform irq.c:
 static struct of_device_id __initdata of_irq_ids[] = {
-	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init },
+	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
 	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
 	{},
 };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 2417cb0b493..cc6151c431c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -101,6 +101,7 @@ mitsubishi	Mitsubishi Electric Corporation
 mosaixtech	Mosaix Technologies, Inc.
 moxa	Moxa
 mpl	MPL AG
+mti	Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
 mundoreader	Mundo Reader S.L.
 murata	Murata Manufacturing Co., Ltd.
 mxicy	Macronix International Co., Ltd.