Merge tag 'regulator-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "Lots and lots of fixes from Axel and some others here, plus some
  framework enhancements which continue the theme of factoring code out
  of the drivers and into the core.

   - Initial framework support for GPIO controlled enable signals,
     saving a bunch of code in drivers.
   - Move fixed regulator enable time and voltage mapping table
     specifications to data.
   - Used some of the recent framework enhancements to make voltage
     change notifications more useful, passing the voltage in as an
     argument to the notification.
   - Fixed the pattern used for finding individual regulators on a
     device to not rely on the node name, supporting the use of multiple
     PMICs of the same type in the system.
   - New drivers for Maxim MAX77686, TI LP872x and LP8788, Samsung
     S2MPS11, and Wolfson Arizona microphone supplies and LDOs."

* tag 'regulator-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (176 commits)
  regulator: add new lp8788 regulator driver
  regulator: mc13xxx: Remove extern function declaration for mc13xxx_sw_regulator
  regulator: tps65910: set input_supply on desc unconditionally
  regulator: palmas: Fix calcuating selector in palmas_map_voltage_smps
  regulator: lp872x: Simplify implementation of lp872x_find_regulator_init_data()
  regulator: twl: Fix list_voltate for twl6030ldo_ops
  regulator: twl: Convert twl6030ldo_ops to [get|set]_voltage_sel
  regulator: twl: Fix the formula to calculate vsel and voltage for twl6030ldo
  regulator: s5m8767: Properly handle gpio_request failure
  regulator: max8997: Properly handle gpio_request failure
  regulator: tps62360: use devm_* for gpio request
  regulator: tps6586x: add support for input supply
  regulator: tps65217: Add device tree support
  regulator: aat2870: Remove unused min_uV and max_uV from struct aat2870_regulator
  regulator: aat2870: Convert to regulator_list_voltage_table
  regulator: da9052: initialize of_node param for regulator register
  regulator: Add REGULATOR_STATUS_UNDEFINED.
  regulator: Fix a typo in regulator_mode_to_status() core function.
  regulator: s2mps11: Use sec_reg_write rather than sec_reg_update when mask is 0xff
  regulator: s2mps11: Fix wrong setting for config.dev
  ...

6 files changed, 237 insertions, 29 deletions

diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt
index 645f5eaadb3..d2802d4717b 100644
--- a/Documentation/devicetree/bindings/mfd/tps65910.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65910.txt
@@ -17,18 +17,46 @@ Required properties:
   device need to be present. The definition for each of these nodes is defined
   using the standard binding for regulators found at
   Documentation/devicetree/bindings/regulator/regulator.txt.
+  The regulator is matched with the regulator-compatible.
 
-  The valid names for regulators are:
+  The valid regulator-compatible values are:
   tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
             vaux2, vaux33, vmmc
   tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
             ldo6, ldo7, ldo8
 
+- xxx-supply: Input voltage supply regulator.
+  These entries are require if regulators are enabled for a device. Missing of these
+  properties can cause the regulator registration fails.
+  If some of input supply is powered through battery or always-on supply then
+  also it is require to have these parameters with proper node handle of always
+  on power supply.
+  tps65910:
+	vcc1-supply: VDD1 input.
+	vcc2-supply: VDD2 input.
+	vcc3-supply: VAUX33 and VMMC input.
+	vcc4-supply: VAUX1 and VAUX2 input.
+	vcc5-supply: VPLL and VDAC input.
+	vcc6-supply: VDIG1 and VDIG2 input.
+	vcc7-supply: VRTC input.
+	vccio-supply: VIO input.
+  tps65911:
+	vcc1-supply: VDD1 input.
+	vcc2-supply: VDD2 input.
+	vcc3-supply: LDO6, LDO7 and LDO8 input.
+	vcc4-supply: LDO5 input.
+	vcc5-supply: LDO3 and LDO4 input.
+	vcc6-supply: LDO1 and LDO2 input.
+	vcc7-supply: VRTC input.
+	vccio-supply: VIO input.
+
 Optional properties:
 - ti,vmbch-threshold: (tps65911) main battery charged threshold
   comparator. (see VMBCH_VSEL in TPS65910 datasheet)
 - ti,vmbch2-threshold: (tps65911) main battery discharged threshold
   comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL
+  in TPS6591X datasheet)
 - ti,en-gpio-sleep: enable sleep control for gpios
   There should be 9 entries here, one for each gpio.
 
@@ -56,74 +84,110 @@ Example:
 
 		ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
 
+		vcc1-supply = <&reg_parent>;
+		vcc2-supply = <&some_reg>;
+		vcc3-supply = <...>;
+		vcc4-supply = <...>;
+		vcc5-supply = <...>;
+		vcc6-supply = <...>;
+		vcc7-supply = <...>;
+		vccio-supply = <...>;
+
 		regulators {
-			vdd1_reg: vdd1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd1_reg: regulator@0 {
+				regulator-compatible = "vdd1";
+				reg = <0>;
 				regulator-min-microvolt = < 600000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 				regulator-boot-on;
 				ti,regulator-ext-sleep-control = <0>;
 			};
-			vdd2_reg: vdd2 {
+			vdd2_reg: regulator@1 {
+				regulator-compatible = "vdd2";
+				reg = <1>;
 				regulator-min-microvolt = < 600000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 				regulator-boot-on;
 				ti,regulator-ext-sleep-control = <4>;
 			};
-			vddctrl_reg: vddctrl {
+			vddctrl_reg: regulator@2 {
+				regulator-compatible = "vddctrl";
+				reg = <2>;
 				regulator-min-microvolt = < 600000>;
 				regulator-max-microvolt = <1400000>;
 				regulator-always-on;
 				regulator-boot-on;
 				ti,regulator-ext-sleep-control = <0>;
 			};
-			vio_reg: vio {
+			vio_reg: regulator@3 {
+				regulator-compatible = "vio";
+				reg = <3>;
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 				regulator-boot-on;
 				ti,regulator-ext-sleep-control = <1>;
 			};
-			ldo1_reg: ldo1 {
+			ldo1_reg: regulator@4 {
+				regulator-compatible = "ldo1";
+				reg = <4>;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				ti,regulator-ext-sleep-control = <0>;
 			};
-			ldo2_reg: ldo2 {
+			ldo2_reg: regulator@5 {
+				regulator-compatible = "ldo2";
+				reg = <5>;
 				regulator-min-microvolt = <1050000>;
 				regulator-max-microvolt = <1050000>;
 				ti,regulator-ext-sleep-control = <0>;
 			};
-			ldo3_reg: ldo3 {
+			ldo3_reg: regulator@6 {
+				regulator-compatible = "ldo3";
+				reg = <6>;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				ti,regulator-ext-sleep-control = <0>;
 			};
-			ldo4_reg: ldo4 {
+			ldo4_reg: regulator@7 {
+				regulator-compatible = "ldo4";
+				reg = <7>;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 				ti,regulator-ext-sleep-control = <0>;
 			};
-			ldo5_reg: ldo5 {
+			ldo5_reg: regulator@8 {
+				regulator-compatible = "ldo5";
+				reg = <8>;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				ti,regulator-ext-sleep-control = <0>;
 			};
-			ldo6_reg: ldo6 {
+			ldo6_reg: regulator@9 {
+				regulator-compatible = "ldo6";
+				reg = <9>;
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
 				ti,regulator-ext-sleep-control = <0>;
 			};
-			ldo7_reg: ldo7 {
+			ldo7_reg: regulator@10 {
+				regulator-compatible = "ldo7";
+				reg = <10>;
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
 				regulator-boot-on;
 				ti,regulator-ext-sleep-control = <1>;
 			};
-			ldo8_reg: ldo8 {
+			ldo8_reg: regulator@11 {
+				regulator-compatible = "ldo8";
+				reg = <11>;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
index 2f5b6b1ba15..4fae41d5479 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
@@ -10,6 +10,7 @@ Optional properties:
 If this property is missing, the default assumed is Active low.
 - gpio-open-drain: GPIO is open drain type.
   If this property is missing then default assumption is false.
+-vin-supply: Input supply name.
 
 Any property defined as part of the core regulator
 binding, defined in regulator.txt, can also be used.
@@ -29,4 +30,5 @@ Example:
 		enable-active-high;
 		regulator-boot-on;
 		gpio-open-drain;
+		vin-supply = <&parent_reg>;
 	};
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 5b7a408acda..66ece3f87bb 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -10,6 +10,11 @@ Optional properties:
 - regulator-always-on: boolean, regulator should never be disabled
 - regulator-boot-on: bootloader/firmware enabled regulator
 - <name>-supply: phandle to the parent supply/regulator node
+- regulator-ramp-delay: ramp delay for regulator(in uV/uS)
+- regulator-compatible: If a regulator chip contains multiple
+  regulators, and if the chip's binding contains a child node that
+  describes each regulator, then this property indicates which regulator
+  this child node is intended to configure.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt
new file mode 100644
index 00000000000..0487e9675ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65217.txt
@@ -0,0 +1,91 @@
+TPS65217 family of regulators
+
+Required properties:
+- compatible: "ti,tps65217"
+- reg: I2C slave address
+- regulators: list of regulators provided by this controller, must be named
+  after their hardware counterparts: dcdc[1-3] and ldo[1-4]
+- regulators: This is the list of child nodes that specify the regulator
+  initialization data for defined regulators. Not all regulators for the given
+  device need to be present. The definition for each of these nodes is defined
+  using the standard binding for regulators found at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+
+  The valid names for regulators are:
+  tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	tps: tps@24 {
+		compatible = "ti,tps65217";
+
+		regulators {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dcdc1_reg: regulator@0 {
+				reg = <0>;
+				regulator-compatible = "dcdc1";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			dcdc2_reg: regulator@1 {
+				reg = <1>;
+				regulator-compatible = "dcdc2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			dcdc3_reg: regulator@2 {
+				reg = <2>;
+				regulator-compatible = "dcdc3";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: regulator@3 {
+				reg = <3>;
+				regulator-compatible = "ldo1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: regulator@4 {
+				reg = <4>;
+				regulator-compatible = "ldo2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: regulator@5 {
+				reg = <5>;
+				regulator-compatible = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: regulator@6 {
+				reg = <6>;
+				regulator-compatible = "ldo4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt
index 0fcabaa3baa..d156e1b5db1 100644
--- a/Documentation/devicetree/bindings/regulator/tps6586x.txt
+++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt
@@ -6,8 +6,17 @@ Required properties:
 - interrupts: the interrupt outputs of the controller
 - #gpio-cells: number of cells to describe a GPIO
 - gpio-controller: mark the device as a GPIO controller
-- regulators: list of regulators provided by this controller, must be named
-  after their hardware counterparts: sm[0-2], ldo[0-9] and ldo_rtc
+- regulators: list of regulators provided by this controller, must have
+  property "regulator-compatible" to match their hardware counterparts:
+  sm[0-2], ldo[0-9] and ldo_rtc
+- sm0-supply: The input supply for the SM0.
+- sm1-supply: The input supply for the SM1.
+- sm2-supply: The input supply for the SM2.
+- vinldo01-supply: The input supply for the LDO1 and LDO2
+- vinldo23-supply: The input supply for the LDO2 and LDO3
+- vinldo4-supply: The input supply for the LDO4
+- vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8
+- vinldo9-supply: The input supply for the LDO9
 
 Each regulator is defined using the standard binding for regulators.
 
@@ -21,75 +30,113 @@ Example:
 		#gpio-cells = <2>;
 		gpio-controller;
 
+		sm0-supply = <&some_reg>;
+		sm1-supply = <&some_reg>;
+		sm2-supply = <&some_reg>;
+		vinldo01-supply = <...>;
+		vinldo23-supply = <...>;
+		vinldo4-supply = <...>;
+		vinldo678-supply = <...>;
+		vinldo9-supply = <...>;
+
 		regulators {
-			sm0_reg: sm0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sm0_reg: regulator@0 {
+				reg = <0>;
+				regulator-compatible = "sm0";
 				regulator-min-microvolt = < 725000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			sm1_reg: sm1 {
+			sm1_reg: regulator@1 {
+				reg = <1>;
+				regulator-compatible = "sm1";
 				regulator-min-microvolt = < 725000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			sm2_reg: sm2 {
+			sm2_reg: regulator@2 {
+				reg = <2>;
+				regulator-compatible = "sm2";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <4550000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			ldo0_reg: ldo0 {
+			ldo0_reg: regulator@3 {
+				reg = <3>;
+				regulator-compatible = "ldo0";
 				regulator-name = "PCIE CLK";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo1_reg: ldo1 {
+			ldo1_reg: regulator@4 {
+				reg = <4>;
+				regulator-compatible = "ldo1";
 				regulator-min-microvolt = < 725000>;
 				regulator-max-microvolt = <1500000>;
 			};
 
-			ldo2_reg: ldo2 {
+			ldo2_reg: regulator@5 {
+				reg = <5>;
+				regulator-compatible = "ldo2";
 				regulator-min-microvolt = < 725000>;
 				regulator-max-microvolt = <1500000>;
 			};
 
-			ldo3_reg: ldo3 {
+			ldo3_reg: regulator@6 {
+				reg = <6>;
+				regulator-compatible = "ldo3";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo4_reg: ldo4 {
+			ldo4_reg: regulator@7 {
+				reg = <7>;
+				regulator-compatible = "ldo4";
 				regulator-min-microvolt = <1700000>;
 				regulator-max-microvolt = <2475000>;
 			};
 
-			ldo5_reg: ldo5 {
+			ldo5_reg: regulator@8 {
+				reg = <8>;
+				regulator-compatible = "ldo5";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo6_reg: ldo6 {
+			ldo6_reg: regulator@9 {
+				reg = <9>;
+				regulator-compatible = "ldo6";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo7_reg: ldo7 {
+			ldo7_reg: regulator@10 {
+				reg = <10>;
+				regulator-compatible = "ldo7";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo8_reg: ldo8 {
+			ldo8_reg: regulator@11 {
+				reg = <11>;
+				regulator-compatible = "ldo8";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo9_reg: ldo9 {
+			ldo9_reg: regulator@12 {
+				reg = <12>;
+				regulator-compatible = "ldo9";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
diff --git a/Documentation/devicetree/bindings/regulator/twl-regulator.txt b/Documentation/devicetree/bindings/regulator/twl-regulator.txt
index 0c3395d55ac..658749b90b9 100644
--- a/Documentation/devicetree/bindings/regulator/twl-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/twl-regulator.txt
@@ -15,7 +15,6 @@ For twl6030 regulators/LDOs
   - "ti,twl6030-vusb" for VUSB LDO
   - "ti,twl6030-v1v8" for V1V8 LDO
   - "ti,twl6030-v2v1" for V2V1 LDO
-  - "ti,twl6030-clk32kg" for CLK32KG RESOURCE
   - "ti,twl6030-vdd1" for VDD1 SMPS
   - "ti,twl6030-vdd2" for VDD2 SMPS
   - "ti,twl6030-vdd3" for VDD3 SMPS