Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

Pull LED subsystem update from Bryan Wu:
 "The big change of LED subsystem is introducing a new LED class for
  Flash type LEDs which will be used for V4L2 subsystem.

  Also we got some cleanup and fixes"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: leds-gpio: Pass on error codes unmodified
  DT: leds: Add led-sources property
  leds: Add LED Flash class extension to the LED subsystem
  leds: leds-mc13783: Use of_get_child_by_name() instead of refcount hack
  leds: Use setup_timer
  leds: Don't allow brightness values greater than max_brightness
  DT: leds: Add flash LED devices related properties

1 files changed, 30 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index 2d88816dd55..34811c57db6 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -1,6 +1,19 @@
 Common leds properties.
 
+LED and flash LED devices provide the same basic functionality as current
+regulators, but extended with LED and flash LED specific features like
+blinking patterns, flash timeout, flash faults and external flash strobe mode.
+
+Many LED devices expose more than one current output that can be connected
+to one or more discrete LED component. Since the arrangement of connections
+can influence the way of the LED device initialization, the LED components
+have to be tightly coupled with the LED device binding. They are represented
+by child nodes of the parent LED device binding.
+
 Optional properties for child nodes:
+- led-sources : List of device current outputs the LED is connected to. The
+		outputs are identified by the numbers that must be defined
+		in the LED device binding documentation.
 - label : The label for this LED.  If omitted, the label is
   taken from the node name (excluding the unit address).
 
@@ -14,6 +27,15 @@ Optional properties for child nodes:
      "ide-disk" - LED indicates disk activity
      "timer" - LED flashes at a fixed, configurable rate
 
+- max-microamp : maximum intensity in microamperes of the LED
+		 (torch LED for flash devices)
+- flash-max-microamp : maximum intensity in microamperes of the
+                       flash LED; it is mandatory if the LED should
+		       support the flash mode
+- flash-timeout-us : timeout in microseconds after which the flash
+                     LED is turned off
+
+
 Examples:
 
 system-status {
@@ -21,3 +43,11 @@ system-status {
 	linux,default-trigger = "heartbeat";
 	...
 };
+
+camera-flash {
+	label = "Flash";
+	led-sources = <0>, <1>;
+	max-microamp = <50000>;
+	flash-max-microamp = <320000>;
+	flash-timeout-us = <500000>;
+};