summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-05-21 16:49:16 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-05-21 16:49:16 -0700
commitac1806572df55b6125ad9d117906820dacfa3145 (patch)
tree6831707507d54e20d561a6403d2ff3e8469909ce /Documentation/devicetree
parentae82a8282031e3c31a4f68c5381ee459e42908f8 (diff)
parent84df8c1241beb87fec73415ef4f6e627aca34835 (diff)
Merge tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown: "The major thing here is the addition of some helpers to factor code out of drivers, making a fair proportion of regulators much more just data rather than code which is nice. - Helpers in the core for regulators using regmap, providing generic implementations of the enable and voltage selection operations which just need data to describe them in the drivers. - Split out voltage mapping and voltage setting, allowing many more drivers to take advantage of the infrastructure for selectors. - Loads and loads of cleanups from Axel Lin once again, including many changes to take advantage of the above new framework features - New drivers for Ricoh RC5T583, TI TPS62362, TI TPS62363, TI TPS65913, TI TWL6035 and TI TWL6037. Some of the registration changes to support the core refactoring caused so many conflicts that eventually topic branches were abandoned for this release." * tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (227 commits) regulator: tps65910: use of_node of matched regulator being register regulator: tps65910: dt: support when "regulators" node found regulator: tps65910: add error message in case of failure regulator: tps62360: dt: initialize of_node param for regulator register. regulator: tps65910: use devm_* for memory allocation regulator: tps65910: use small letter for regulator names mfd: tpx6586x: Depend on regulator regulator: regulator for Palmas Kconfig regulator: regulator driver for Palmas series chips regulator: Enable Device Tree for the db8500-prcmu regulator driver regulator: db8500-prcmu: Separate regulator registration from probe regulator: ab3100: Use regulator_map_voltage_iterate() regulator: tps65217: Convert to set_voltage_sel and map_voltage regulator: Enable the ab8500 for Device Tree regulator: ab8500: Split up probe() into manageable pieces regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_info regulator: max8649: Remove unused check_range() function regulator: rc5t583: Remove max_uV from struct rc5t583_regulator_info regulator: da9052: Convert to set_voltage_sel and map_voltage regulator: max8952: Use devm_kzalloc ...
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/regulator/fixed-regulator.txt5
-rw-r--r--Documentation/devicetree/bindings/regulator/tps62360-regulator.txt44
-rw-r--r--Documentation/devicetree/bindings/regulator/tps6586x.txt97
3 files changed, 145 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
index 9cf57fd042d..2f5b6b1ba15 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
@@ -8,6 +8,8 @@ Optional properties:
- startup-delay-us: startup time in microseconds
- enable-active-high: Polarity of GPIO is Active high
If this property is missing, the default assumed is Active low.
+- gpio-open-drain: GPIO is open drain type.
+ If this property is missing then default assumption is false.
Any property defined as part of the core regulator
binding, defined in regulator.txt, can also be used.
@@ -25,5 +27,6 @@ Example:
gpio = <&gpio1 16 0>;
startup-delay-us = <70000>;
enable-active-high;
- regulator-boot-on
+ regulator-boot-on;
+ gpio-open-drain;
};
diff --git a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
new file mode 100644
index 00000000000..c8ca6b8f658
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
@@ -0,0 +1,44 @@
+TPS62360 Voltage regulators
+
+Required properties:
+- compatible: Must be one of the following.
+ "ti,tps62360"
+ "ti,tps62361",
+ "ti,tps62362",
+ "ti,tps62363",
+- reg: I2C slave address
+
+Optional properties:
+- ti,enable-vout-discharge: Enable output discharge. This is boolean value.
+- ti,enable-pull-down: Enable pull down. This is boolean value.
+- ti,vsel0-gpio: GPIO for controlling VSEL0 line.
+ If this property is missing, then assume that there is no GPIO
+ for vsel0 control.
+- ti,vsel1-gpio: Gpio for controlling VSEL1 line.
+ If this property is missing, then assume that there is no GPIO
+ for vsel1 control.
+- ti,vsel0-state-high: Inital state of vsel0 input is high.
+ If this property is missing, then assume the state as low (0).
+- ti,vsel1-state-high: Inital state of vsel1 input is high.
+ If this property is missing, then assume the state as low (0).
+
+Any property defined as part of the core regulator binding, defined in
+regulator.txt, can also be used.
+
+Example:
+
+ abc: tps62360 {
+ compatible = "ti,tps62361";
+ reg = <0x60>;
+ regulator-name = "tps62361-vout";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on
+ ti,vsel0-gpio = <&gpio1 16 0>;
+ ti,vsel1-gpio = <&gpio1 17 0>;
+ ti,vsel0-state-high;
+ ti,vsel1-state-high;
+ ti,enable-pull-down;
+ ti,enable-force-pwm;
+ ti,enable-vout-discharge;
+ };
diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt
new file mode 100644
index 00000000000..0fcabaa3baa
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt
@@ -0,0 +1,97 @@
+TPS6586x family of regulators
+
+Required properties:
+- compatible: "ti,tps6586x"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- #gpio-cells: number of cells to describe a GPIO
+- gpio-controller: mark the device as a GPIO controller
+- regulators: list of regulators provided by this controller, must be named
+ after their hardware counterparts: sm[0-2], ldo[0-9] and ldo_rtc
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+ pmu: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <0 88 0x4>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ regulators {
+ sm0_reg: sm0 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm1_reg: sm1 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm2_reg: sm2 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <4550000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo0_reg: ldo0 {
+ regulator-name = "PCIE CLK";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <2475000>;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };