Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input layer updates from Dmitry Torokhov:
 "First set of updates for the input subsystem.  You will get a new
  touchscreen driver (Melfas mms114), a new keypad driver for LPC32xx
  SoC, large update to Atmel mXT touchscreen driver, a lot of drivers
  acquired device tree support and a slew of other fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  Input: add MELFAS mms114 touchscreen driver
  Input: add support for key scan interface of the LPC32xx SoC
  Input: omap4-keypad - add device tree support
  Input: hanwang - add support for Art Master II tablet
  Input: spear_keyboard - reconfigure operating frequency on suspend
  Input: spear_keyboard - fix clock handling during suspend/resume
  Input: ff-memless - fix a couple min_t() casts
  Input: synaptics - print firmware ID and board number at init
  Input: spear_keyboard - generalize keyboard frequency configuration
  Input: spear_keyboard - rename bit definitions to reflect register
  Input: spear_keyboard - use correct io accessors
  Input: spear-keyboard - fix disable device_init_wakeup in remove
  Input: wacom_i2c - fix compiler warning
  Input: imx_keypad - check error returned by clk_prepare_enable()
  Input: imx_keypad - adapt the new kpp clock name
  Input: imx_keypad - use clk_prepare_enable/clk_disable_unprepare()
  Input: ad7879 - add option to correct xy axis
  Input: synaptics_usb - Remove TrackPoint name trailing whitespace
  Revert "Input: atmel_mxt_ts - warn if sysfs could not be created"
  Input: MT - Include win8 support
  ...

3 files changed, 59 insertions, 37 deletions

diff --git a/Documentation/devicetree/bindings/input/lpc32xx-key.txt b/Documentation/devicetree/bindings/input/lpc32xx-key.txt
new file mode 100644
index 00000000000..31afd5014c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/lpc32xx-key.txt
@@ -0,0 +1,28 @@
+NXP LPC32xx Key Scan Interface
+
+Required Properties:
+- compatible: Should be "nxp,lpc3220-key"
+- reg: Physical base address of the controller and length of memory mapped
+  region.
+- interrupts: The interrupt number to the cpu.
+- keypad,num-rows: Number of rows and columns, e.g. 1: 1x1, 6: 6x6
+- keypad,num-columns: Must be equal to keypad,num-rows since LPC32xx only
+  supports square matrices
+- nxp,debounce-delay-ms: Debounce delay in ms
+- nxp,scan-delay-ms: Repeated scan period in ms
+- linux,keymap: the key-code to be reported when the key is pressed
+  and released, see also
+  Documentation/devicetree/bindings/input/matrix-keymap.txt
+
+Example:
+
+	key@40050000 {
+		compatible = "nxp,lpc3220-key";
+		reg = <0x40050000 0x1000>;
+		interrupts = <54 0>;
+		keypad,num-rows = <1>;
+		keypad,num-columns = <1>;
+		nxp,debounce-delay-ms = <3>;
+		nxp,scan-delay-ms = <34>;
+		linux,keymap = <0x00000002>;
+	};
diff --git a/Documentation/devicetree/bindings/input/omap-keypad.txt b/Documentation/devicetree/bindings/input/omap-keypad.txt
new file mode 100644
index 00000000000..f2fa5e10493
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/omap-keypad.txt
@@ -0,0 +1,31 @@
+* TI's Keypad Controller device tree bindings
+
+TI's Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+   - "ti,omap4-keypad": For controllers compatible with omap4 keypad
+      controller.
+
+Required Board Specific Properties, in addition to those specified by
+the shared matrix-keyboard bindings:
+- keypad,num-rows: Number of row lines connected to the keypad
+  controller.
+
+- keypad,num-columns: Number of column lines connected to the
+  keypad controller.
+
+Optional Properties specific to linux:
+- linux,keypad-no-autorepeat: do no enable autorepeat feature.
+
+Example:
+	keypad@4ae1c000{
+		compatible = "ti,omap4-keypad";
+		keypad,num-rows = <2>;
+		keypad,num-columns = <8>;
+		linux,keypad-no-autorepeat;
+	};
diff --git a/Documentation/devicetree/bindings/input/twl6040-vibra.txt b/Documentation/devicetree/bindings/input/twl6040-vibra.txt
deleted file mode 100644
index 5b1918b818f..00000000000
--- a/Documentation/devicetree/bindings/input/twl6040-vibra.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Vibra driver for the twl6040 family
-
-The vibra driver is a child of the twl6040 MFD dirver.
-Documentation/devicetree/bindings/mfd/twl6040.txt
-
-Required properties:
-- compatible : Must be "ti,twl6040-vibra";
-- interrupts: 4, Vibra overcurrent interrupt
-- vddvibl-supply: Regulator supplying the left vibra motor
-- vddvibr-supply: Regulator supplying the right vibra motor
-- vibldrv_res: Board specific left driver resistance
-- vibrdrv_res: Board specific right driver resistance
-- viblmotor_res: Board specific left motor resistance
-- vibrmotor_res: Board specific right motor resistance
-
-Optional properties:
-- vddvibl_uV: If the vddvibl default voltage need to be changed
-- vddvibr_uV: If the vddvibr default voltage need to be changed
-
-Example:
-/*
- * 8-channel high quality low-power audio codec
- * http://www.ti.com/lit/ds/symlink/twl6040.pdf
- */
-twl6040: twl6040@4b {
-	...
-	twl6040_vibra: twl6040@1 {
-		compatible = "ti,twl6040-vibra";
-		interrupts = <4>;
-		vddvibl-supply = <&vbat>;
-		vddvibr-supply = <&vbat>;
-		vibldrv_res = <8>;
-		vibrdrv_res = <3>;
-		viblmotor_res = <10>;
-		vibrmotor_res = <10>;
-	};
-};