iio: iadc: Qualcomm SPMI PMIC current ADC driver

The current ADC is peripheral of Qualcomm SPMI PMIC chips. It has
16 bits resolution and register space inside PMIC accessible across
SPMI bus.

The driver registers itself through IIO interface.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

1 files changed, 46 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt
new file mode 100644
index 00000000000..4e36d6e2f7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt
@@ -0,0 +1,46 @@
+Qualcomm's SPMI PMIC current ADC
+
+QPNP PMIC current ADC (IADC) provides interface to clients to read current.
+A 16 bit ADC is used for current measurements. IADC can measure the current
+through an external resistor (channel 1) or internal (built-in) resistor
+(channel 0). When using an external resistor it is to be described by
+qcom,external-resistor-micro-ohms property.
+
+IADC node:
+
+- compatible:
+    Usage: required
+    Value type: <string>
+    Definition: Should contain "qcom,spmi-iadc".
+
+- reg:
+    Usage: required
+    Value type: <prop-encoded-array>
+    Definition: IADC base address and length in the SPMI PMIC register map
+
+- interrupts:
+    Usage: optional
+    Value type: <prop-encoded-array>
+    Definition: End of ADC conversion.
+
+- qcom,external-resistor-micro-ohms:
+    Usage: optional
+    Value type: <u32>
+    Definition: Sense resister value in micro Ohm.
+                If not defined value of 10000 micro Ohms will be used.
+
+Example:
+	/* IADC node */
+	pmic_iadc: iadc@3600 {
+		compatible = "qcom,spmi-iadc";
+		reg = <0x3600 0x100>;
+		interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+		qcom,external-resistor-micro-ohms = <10000>;
+		#io-channel-cells  = <1>;
+	};
+
+	/* IIO client node */
+	bat {
+		io-channels = <&pmic_iadc  0>;
+		io-channel-names = "iadc";
+	};