Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "This contains cleanups as preparation for other branches adding new
  features, we pulled 16 branches for 9 platforms into this one.

  Most notable here is the removal of support for ATAGS based OMAP4
  systems.  Since all OMAP4 machines are fully functional with DT based
  booting in 3.10, we can remove a lot of code here.

  Also noteworthy is Maxime Ripard's cleanup of the machine descriptors,
  which means we need no machine descriptors in a lot more cases and can
  boot additional machines by just having the respective device drivers
  enabled."

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
  ARM: picoxcell: remove .nr_irqs reference
  ARM: s5p64x0: avoid build warning for uncompress.h
  ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header
  ARM: SAMSUNG: Remove legacy watchdog reset code
  ARM: SAMSUNG: Let platforms use the new watchdog reset driver
  ARM: SAMSUNG: Add watchdog reset driver
  ARM: SAMSUNG: Use local definitions of watchdog registers
  watchdog: s3c2410_wdt: Use local register definitions
  ARM: S5P64X0: Use common uncompress.h part for plat-samsung
  ARM: SAMSUNG: Consolidate uncompress subroutine
  ARM: at91: drop rm9200dk board support
  ARM: dts: msm: Fix merge resolution
  ARM: OMAP1: Remove dma.h
  ARM: OMAP1: Remove legacy irda.h and irda setup from board files
  ARM: OMAP1: Remove duplicated DMA channel definitions
  ARM: OMAP1: Remove McBSP DMA channel definitions
  ARM: OMAP2+: Remove dma.h
  ARM: OMAP2+: hwmod: Remove remaining DMA channel definitions
  ARM: OMAP2+: Remove duplicated DMA channel definitions
  ARM: OMAP2+: Remove AES crypto device DMA channel definitions
  ...

4 files changed, 172 insertions, 85 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-msm.txt b/Documentation/devicetree/bindings/gpio/gpio-msm.txt
new file mode 100644
index 00000000000..ac20e68a004
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-msm.txt
@@ -0,0 +1,26 @@
+MSM GPIO controller bindings
+
+Required properties:
+- compatible:
+  - "qcom,msm-gpio" for MSM controllers
+- #gpio-cells : Should be two.
+  - first cell is the pin number
+  - second cell is used to specify optional parameters (unused)
+- gpio-controller : Marks the device node as a GPIO controller.
+- #interrupt-cells : Should be 2.
+- interrupt-controller: Mark the device node as an interrupt controller
+- interrupts : Specify the TLMM summary interrupt number
+- ngpio : Specify the number of MSM GPIOs
+
+Example:
+
+	msmgpio: gpio@fd510000 {
+		compatible = "qcom,msm-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		reg = <0xfd510000 0x4000>;
+		interrupts = <0 208 0>;
+		ngpio = <150>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
index e7f4dc14eff..57edb30dbbc 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
@@ -8,91 +8,8 @@ Required properties:
 - #interrupt-cells : Specifies the number of cells needed to encode an
   interrupt source. The value shall be 1.
 
-The interrupt sources are as follows:
-
-0: ENMI
-1: UART0
-2: UART1
-3: UART2
-4: UART3
-5: IR0
-6: IR1
-7: I2C0
-8: I2C1
-9: I2C2
-10: SPI0
-11: SPI1
-12: SPI2
-13: SPDIF
-14: AC97
-15: TS
-16: I2S
-17: UART4
-18: UART5
-19: UART6
-20: UART7
-21: KEYPAD
-22: TIMER0
-23: TIMER1
-24: TIMER2
-25: TIMER3
-26: CAN
-27: DMA
-28: PIO
-29: TOUCH_PANEL
-30: AUDIO_CODEC
-31: LRADC
-32: SDMC0
-33: SDMC1
-34: SDMC2
-35: SDMC3
-36: MEMSTICK
-37: NAND
-38: USB0
-39: USB1
-40: USB2
-41: SCR
-42: CSI0
-43: CSI1
-44: LCDCTRL0
-45: LCDCTRL1
-46: MP
-47: DEFEBE0
-48: DEFEBE1
-49: PMU
-50: SPI3
-51: TZASC
-52: PATA
-53: VE
-54: SS
-55: EMAC
-56: SATA
-57: GPS
-58: HDMI
-59: TVE
-60: ACE
-61: TVD
-62: PS2_0
-63: PS2_1
-64: USB3
-65: USB4
-66: PLE_PFM
-67: TIMER4
-68: TIMER5
-69: GPU_GP
-70: GPU_GPMMU
-71: GPU_PP0
-72: GPU_PPMMU0
-73: GPU_PMU
-74: GPU_RSV0
-75: GPU_RSV1
-76: GPU_RSV2
-77: GPU_RSV3
-78: GPU_RSV4
-79: GPU_RSV5
-80: GPU_RSV6
-82: SYNC_TIMER0
-83: SYNC_TIMER1
+For the valid interrupt sources for your SoC, see the documentation in
+sunxi/<soc>.txt
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun4i-a10.txt b/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun4i-a10.txt
new file mode 100644
index 00000000000..76b98c83449
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun4i-a10.txt
@@ -0,0 +1,89 @@
+Allwinner A10 (sun4i) interrupt sources
+---------------------------------------
+
+The interrupt sources available for the Allwinner A10 SoC are the
+following one:
+
+0: ENMI
+1: UART0
+2: UART1
+3: UART2
+4: UART3
+5: IR0
+6: IR1
+7: I2C0
+8: I2C1
+9: I2C2
+10: SPI0
+11: SPI1
+12: SPI2
+13: SPDIF
+14: AC97
+15: TS
+16: I2S
+17: UART4
+18: UART5
+19: UART6
+20: UART7
+21: KEYPAD
+22: TIMER0
+23: TIMER1
+24: TIMER2
+25: TIMER3
+26: CAN
+27: DMA
+28: PIO
+29: TOUCH_PANEL
+30: AUDIO_CODEC
+31: LRADC
+32: MMC0
+33: MMC1
+34: MMC2
+35: MMC3
+36: MEMSTICK
+37: NAND
+38: USB0
+39: USB1
+40: USB2
+41: SCR
+42: CSI0
+43: CSI1
+44: LCDCTRL0
+45: LCDCTRL1
+46: MP
+47: DEFEBE0
+48: DEFEBE1
+49: PMU
+50: SPI3
+51: TZASC
+52: PATA
+53: VE
+54: SS
+55: EMAC
+56: SATA
+57: GPS
+58: HDMI
+59: TVE
+60: ACE
+61: TVD
+62: PS2_0
+63: PS2_1
+64: USB3
+65: USB4
+66: PLE_PFM
+67: TIMER4
+68: TIMER5
+69: GPU_GP
+70: GPU_GPMMU
+71: GPU_PP0
+72: GPU_PPMMU0
+73: GPU_PMU
+74: GPU_RSV0
+75: GPU_RSV1
+76: GPU_RSV2
+77: GPU_RSV3
+78: GPU_RSV4
+79: GPU_RSV5
+80: GPU_RSV6
+82: SYNC_TIMER0
+83: SYNC_TIMER1
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun5i-a13.txt b/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun5i-a13.txt
new file mode 100644
index 00000000000..2ec3b5ce1a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun5i-a13.txt
@@ -0,0 +1,55 @@
+Allwinner A13 (sun5i) interrupt sources
+---------------------------------------
+
+The interrupt sources available for the Allwinner A13 SoC are the
+following one:
+
+0: ENMI
+2: UART1
+4: UART3
+5: IR
+7: I2C0
+8: I2C1
+9: I2C2
+10: SPI0
+11: SPI1
+12: SPI2
+22: TIMER0
+23: TIMER1
+24: TIMER2
+25: TIMER3
+27: DMA
+28: PIO
+29: TOUCH_PANEL
+30: AUDIO_CODEC
+31: LRADC
+32: MMC0
+33: MMC1
+34: MMC2
+37: NAND
+38: USB OTG
+39: USB EHCI
+40: USB OHCI
+42: CSI
+44: LCDCTRL
+47: DEFEBE
+49: PMU
+53: VE
+54: SS
+66: PLE_PFM
+67: TIMER4
+68: TIMER5
+69: GPU_GP
+70: GPU_GPMMU
+71: GPU_PP0
+72: GPU_PPMMU0
+73: GPU_PMU
+74: GPU_RSV0
+75: GPU_RSV1
+76: GPU_RSV2
+77: GPU_RSV3
+78: GPU_RSV4
+79: GPU_RSV5
+80: GPU_RSV6
+82: SYNC_TIMER0
+83: SYNC_TIMER1