Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM driver updates from Olof Johansson:
 "Updates of SoC-near drivers and other driver updates that makes more
  sense to take through our tree.

  The largest part of this is a conversion of device registration for
  some renesas shmobile/sh devices over to use resources.  This has
  required coordination with the corresponding arch/sh changes, and
  we've agreed to merge the arch/sh changes through our tree.

  Added in this branch is support for Trusted Foundations secure
  firmware, which is what is used on many of the commercial Nvidia Tegra
  products that are in the market, including the Nvidia Shield.  The
  code is local to arch/arm at this time since it's uncertain whether it
  will be shared with arm64 longer-term, if needed we will refactor
  later.

  A couple of new RTC drivers used on ARM boards, merged through our
  tree on request by the RTC maintainer.

  ... plus a bunch of smaller updates across the board, gpio conversions
  for davinci, etc"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
  watchdog: davinci: rename platform driver to davinci-wdt
  tty: serial: Limit msm_serial_hs driver to platforms that use it
  mmc: msm_sdcc: Limit driver to platforms that use it
  usb: phy: msm: Move mach dependent code to platform data
  clk: versatile: fixup IM-PD1 clock implementation
  clk: versatile: pass a name to ICST clock provider
  ARM: integrator: pass parent IRQ to the SIC
  irqchip: versatile FPGA: support cascaded interrupts from DT
  gpio: davinci: don't create irq_domain in case of unbanked irqs
  gpio: davinci: use chained_irq_enter/chained_irq_exit API
  gpio: davinci: add OF support
  gpio: davinci: remove unused variable intc_irq_num
  gpio: davinci: convert to use irqdomain support.
  gpio: introduce GPIO_DAVINCI kconfig option
  gpio: davinci: get rid of DAVINCI_N_GPIO
  gpio: davinci: use {readl|writel}_relaxed() instead of __raw_*
  serial: sh-sci: Add OF support
  serial: sh-sci: Add device tree bindings documentation
  serial: sh-sci: Remove platform data mapbase and irqs fields
  serial: sh-sci: Remove platform data scbrr_algo_id field
  ...

9 files changed, 205 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt
new file mode 100644
index 00000000000..780d0392a66
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt
@@ -0,0 +1,20 @@
+Trusted Foundations
+-------------------
+
+Boards that use the Trusted Foundations secure monitor can signal its
+presence by declaring a node compatible with "tlm,trusted-foundations"
+under the /firmware/ node
+
+Required properties:
+- compatible: "tlm,trusted-foundations"
+- tlm,version-major: major version number of Trusted Foundations firmware
+- tlm,version-minor: minor version number of Trusted Foundations firmware
+
+Example:
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt
index ed9c8533443..558ed4b4ef3 100644
--- a/Documentation/devicetree/bindings/arm/tegra.txt
+++ b/Documentation/devicetree/bindings/arm/tegra.txt
@@ -32,3 +32,8 @@ board-specific compatible values:
   nvidia,whistler
   toradex,colibri_t20-512
   toradex,iris
+
+Trusted Foundations
+-------------------------------------------
+Tegra supports the Trusted Foundation secure monitor. See the
+"tlm,trusted-foundations" binding's documentation for more details.
diff --git a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt
index 9989eda755d..c9cf605bb99 100644
--- a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt
+++ b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt
@@ -29,3 +29,8 @@ pic: pic@14000000 {
         clear-mask = <0xffffffff>;
         valid-mask = <0x003fffff>;
 };
+
+Optional properties:
+- interrupts: if the FPGA IRQ controller is cascaded, i.e. if its IRQ
+  output is simply connected to the input of another IRQ controller,
+  then the parent IRQ shall be specified in this property.
diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
new file mode 100644
index 00000000000..f2aab3dc2b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
@@ -0,0 +1,68 @@
+* Atmel HW cryptographic accelerators
+
+These are the HW cryptographic accelerators found on some Atmel products.
+
+* Advanced Encryption Standard (AES)
+
+Required properties:
+- compatible : Should be "atmel,at91sam9g46-aes".
+- reg: Should contain AES registers location and length.
+- interrupts: Should contain the IRQ line for the AES.
+- dmas: List of two DMA specifiers as described in
+        atmel-dma.txt and dma.txt files.
+- dma-names: Contains one identifier string for each DMA specifier
+             in the dmas property.
+
+Example:
+aes@f8038000 {
+	compatible = "atmel,at91sam9g46-aes";
+	reg = <0xf8038000 0x100>;
+	interrupts = <43 4 0>;
+	dmas = <&dma1 2 18>,
+	       <&dma1 2 19>;
+	dma-names = "tx", "rx";
+
+* Triple Data Encryption Standard (Triple DES)
+
+Required properties:
+- compatible : Should be "atmel,at91sam9g46-tdes".
+- reg: Should contain TDES registers location and length.
+- interrupts: Should contain the IRQ line for the TDES.
+
+Optional properties:
+- dmas: List of two DMA specifiers as described in
+        atmel-dma.txt and dma.txt files.
+- dma-names: Contains one identifier string for each DMA specifier
+             in the dmas property.
+
+Example:
+tdes@f803c000 {
+	compatible = "atmel,at91sam9g46-tdes";
+	reg = <0xf803c000 0x100>;
+	interrupts = <44 4 0>;
+	dmas = <&dma1 2 20>,
+	       <&dma1 2 21>;
+	dma-names = "tx", "rx";
+};
+
+* Secure Hash Algorithm (SHA)
+
+Required properties:
+- compatible : Should be "atmel,at91sam9g46-sha".
+- reg: Should contain SHA registers location and length.
+- interrupts: Should contain the IRQ line for the SHA.
+
+Optional properties:
+- dmas: One DMA specifiers as described in
+        atmel-dma.txt and dma.txt files.
+- dma-names: Contains one identifier string for each DMA specifier
+             in the dmas property. Only one "tx" string needed.
+
+Example:
+sha@f8034000 {
+	compatible = "atmel,at91sam9g46-sha";
+	reg = <0xf8034000 0x100>;
+	interrupts = <42 4 0>;
+	dmas = <&dma1 2 17>;
+	dma-names = "tx";
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
new file mode 100644
index 00000000000..a2e839d6e33
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
@@ -0,0 +1,41 @@
+Davinci GPIO controller bindings
+
+Required Properties:
+- compatible: should be "ti,dm6441-gpio"
+
+- reg: Physical base address of the controller and the size of memory mapped
+       registers.
+
+- gpio-controller : Marks the device node as a gpio controller.
+
+- interrupt-parent: phandle of the parent interrupt controller.
+
+- interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are
+	      supported at a time.
+
+- ti,ngpio: The number of GPIO pins supported.
+
+- ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt
+		             line to processor.
+
+The GPIO controller also acts as an interrupt controller. It uses the default
+two cells specifier as described in Documentation/devicetree/bindings/
+interrupt-controller/interrupts.txt.
+
+Example:
+
+gpio: gpio@1e26000 {
+	compatible = "ti,dm6441-gpio";
+	gpio-controller;
+	reg = <0x226000 0x1000>;
+	interrupt-parent = <&intc>;
+	interrupts = <42 IRQ_TYPE_EDGE_BOTH 43 IRQ_TYPE_EDGE_BOTH
+		44 IRQ_TYPE_EDGE_BOTH 45 IRQ_TYPE_EDGE_BOTH
+		46 IRQ_TYPE_EDGE_BOTH 47 IRQ_TYPE_EDGE_BOTH
+		48 IRQ_TYPE_EDGE_BOTH 49 IRQ_TYPE_EDGE_BOTH
+		50 IRQ_TYPE_EDGE_BOTH>;
+	ti,ngpio = <144>;
+	ti,davinci-gpio-unbanked = <0>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index c65f71cfaa5..1a1ac2e560e 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -40,6 +40,7 @@ fsl,sgtl5000		SGTL5000: Ultra Low-Power Audio Codec
 gmt,g751		G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
 infineon,slb9635tt	Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
 infineon,slb9645tt	Infineon SLB9645 I2C TPM (new protocol, max 400khz)
+isl,isl12057		Intersil ISL12057 I2C RTC Chip
 maxim,ds1050		5 Bit Programmable, Pulse-Width Modulator
 maxim,max1237		Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
 maxim,max6625		9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
diff --git a/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt
new file mode 100644
index 00000000000..7cb9dbf3487
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt
@@ -0,0 +1,17 @@
+* sun4i/sun7i Real Time Clock
+
+RTC controller for the Allwinner A10/A20
+
+Required properties:
+- compatible : Should be "allwinner,sun4i-rtc" or "allwinner,sun7i-a20-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: IRQ line for the RTC.
+
+Example:
+
+rtc: rtc@01c20d00 {
+	compatible = "allwinner,sun4i-rtc";
+	reg = <0x01c20d00 0x20>;
+	interrupts = <24>;
+};
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
new file mode 100644
index 00000000000..f372cf29068
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -0,0 +1,46 @@
+* Renesas SH-Mobile Serial Communication Interface
+
+Required properties:
+
+  - compatible: Must contain one of the following:
+
+    - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
+    - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.
+    - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART.
+    - "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible UART.
+    - "renesas,scif-r8a7791" for R8A7791 (R-Car M2) SCIF compatible UART.
+    - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2) SCIFA compatible UART.
+    - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2) SCIFB compatible UART.
+    - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2) HSCIF compatible UART.
+    - "renesas,scif" for generic SCIF compatible UART.
+    - "renesas,scifa" for generic SCIFA compatible UART.
+    - "renesas,scifb" for generic SCIFB compatible UART.
+    - "renesas,hscif" for generic HSCIF compatible UART.
+
+    When compatible with the generic version, nodes must list the
+    SoC-specific version corresponding to the platform first followed by the
+    generic version.
+
+  - reg: Base address and length of the I/O registers used by the UART.
+  - interrupts: Must contain an interrupt-specifier for the SCIx interrupt.
+
+  - clocks: Must contain a phandle and clock-specifier pair for each entry
+    in clock-names.
+  - clock-names: Must contain "sci_ick" for the SCIx UART interface clock.
+
+Note: Each enabled SCIx UART should have an alias correctly numbered in the
+"aliases" node.
+
+Example:
+	aliases {
+		serial0 = &scifa0;
+	};
+
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		reg = <0 0xe6c40000 0 64>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
+		clock-names = "sci_ick";
+	};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index f29cd78b669..ff415d18335 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -40,6 +40,7 @@ ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
 img	Imagination Technologies Ltd.
 intercontrol	Inter Control Group
+isl	Intersil
 lg	LG Corporation
 linux	Linux-specific binding
 lsi	LSI Corp. (LSI Logic)
@@ -74,6 +75,7 @@ st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
 ti	Texas Instruments
+tlm	Trusted Logic Mobility
 toshiba	Toshiba Corporation
 toumaz	Toumaz
 v3	V3 Semiconductor