Merge tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - increase DT coverage: arizona, mc13xxx, stmpe-i2c, syscon,
     sun6i-prcm
   - regmap use of and/or clean-up: tps65090, twl6040
   - basic renaming: max14577
   - use new cpufreq helpers: db8500-prcmu
   - increase regulator support: stmpe, arizona, wm5102
   - reduce legacy GPIO overhead: stmpe
   - provide necessary remove path: bcm590xx
   - expand sysfs presence: kempld
   - move driver specific code out to drivers: rtc-s5m, arizona
   - clk handling: twl6040
   - use managed (devm_*) resources: ipaq-micro
   - clean-up/remove unused/duplicated code: tps65218, sec, pm8921,
     abx500-core, db8500-prcmu, menelaus
   - build/boot/sematic bug fixes: rtsx_usb, stmpe, bcm590xx, abx500,
     mc13xxx, rdc321x-southbridge, mfd-core, sec, max14577, syscon,
     cros_ec_spi
   - constify stuff: sm501, tps65910, tps6507x, tps6586x, max77686,
     max8997, kempld, max77693, max8907, rtsx_usb, db8500-prcmu,
     max8998, wm8400, sec, lp3943, max14577, as3711, omap-usb-host,
     ipaq-micro

  Support for new devices:
   - add support for max77836 into max14577
   - add support for tps658640 into tps6586x
   - add support for cros-ec-i2c-tunnel into cros_ec
   - add new driver for rtsx_usb_sdmmc and rtsx_usb_ms
   - add new driver for axp20x
   - add new driver for sun6i-prcm
   - add new driver for ipaq-micro"

* tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (77 commits)
  mfd: wm5102: Correct default for LDO Control 2 register
  mfd: menelaus: Use module_i2c_driver
  mfd: tps65218: Terminate of match table
  mfd: db8500-prcmu: Remove check for CONFIG_DBX500_PRCMU_DEBUG
  mfd: ti-keystone-devctrl: Add bindings for device state control
  mfd: palmas: Format the header file
  mfd: abx500-core: Remove unused function abx500_dump_all_banks()
  mfd: arizona: Correct addresses of always-on trigger registers
  mfd: max14577: Cast to architecture agnostic data type
  i2c: ChromeOS EC tunnel driver
  mfd: cros_ec: Sync to the latest cros_ec_commands.h from EC sources
  mfd: cros_ec: spi: Increase cros_ec_spi deadline from 5ms to 100ms
  mfd: cros_ec: spi: Make the cros_ec_spi timeout more reliable
  mfd: cros_ec: spi: Add mutex to cros_ec_spi
  mfd: cros_ec: spi: Calculate delay between transfers correctly
  mfd: arizona: Correct error message for addition of main IRQ chip
  mfd: wm8997: Add registers for high power mode
  mfd: arizona: Add MICVDD to mapped regulators
  mfd: ipaq-micro: Make mfd_cell array const
  mfd: ipaq-micro: Use devm_ioremap_resource()
  ...

4 files changed, 119 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
new file mode 100644
index 00000000000..898f030eba6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
@@ -0,0 +1,39 @@
+I2C bus that tunnels through the ChromeOS EC (cros-ec)
+======================================================
+On some ChromeOS board designs we've got a connection to the EC (embedded
+controller) but no direct connection to some devices on the other side of
+the EC (like a battery and PMIC).  To get access to those devices we need
+to tunnel our i2c commands through the EC.
+
+The node for this device should be under a cros-ec node like google,cros-ec-spi
+or google,cros-ec-i2c.
+
+
+Required properties:
+- compatible: google,cros-ec-i2c-tunnel
+- google,remote-bus: The EC bus we'd like to talk to.
+
+Optional child nodes:
+- One node per I2C device connected to the tunnelled I2C bus.
+
+
+Example:
+	cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+
+		...
+
+		i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			google,remote-bus = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+			};
+		};
+	}
diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
new file mode 100644
index 00000000000..1f5a31fef90
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
@@ -0,0 +1,59 @@
+* Allwinner PRCM (Power/Reset/Clock Management) Multi-Functional Device
+
+PRCM is an MFD device exposing several Power Management related devices
+(like clks and reset controllers).
+
+Required properties:
+ - compatible: "allwinner,sun6i-a31-prcm"
+ - reg: The PRCM registers range
+
+The prcm node may contain several subdevices definitions:
+ - see Documentation/devicetree/clk/sunxi.txt for clock devices
+ - see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset
+   controller devices
+
+
+Example:
+
+	prcm: prcm@01f01400 {
+		compatible = "allwinner,sun6i-a31-prcm";
+		reg = <0x01f01400 0x200>;
+
+		/* Put subdevices here */
+		ar100: ar100_clk {
+			compatible = "allwinner,sun6i-a31-ar100-clk";
+			#clock-cells = <0>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+		};
+
+		ahb0: ahb0_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&ar100_div>;
+			clock-output-names = "ahb0";
+		};
+
+		apb0: apb0_clk {
+			compatible = "allwinner,sun6i-a31-apb0-clk";
+			#clock-cells = <0>;
+			clocks = <&ahb0>;
+			clock-output-names = "apb0";
+		};
+
+		apb0_gates: apb0_gates_clk {
+			compatible = "allwinner,sun6i-a31-apb0-gates-clk";
+			#clock-cells = <1>;
+			clocks = <&apb0>;
+			clock-output-names = "apb0_pio", "apb0_ir",
+					"apb0_timer01", "apb0_p2wi",
+					"apb0_uart", "apb0_1wire",
+					"apb0_i2c";
+		};
+
+		apb0_rst: apb0_rst {
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
new file mode 100644
index 00000000000..20963c76b4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
@@ -0,0 +1,19 @@
+* Device tree bindings for Texas Instruments keystone device state control
+
+The Keystone II devices have a set of registers that are used to control
+the status of its peripherals. This node is intended to allow access to
+this functionality.
+
+Required properties:
+
+- compatible:		"ti,keystone-devctrl", "syscon"
+
+- reg:			contains offset/length value for device state control
+			registers space.
+
+Example:
+
+devctrl: device-state-control@0x02620000 {
+	compatible = "ti,keystone-devctrl", "syscon";
+	reg = <0x02620000 0x1000>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt
index 0f5dd709d75..a41157b5d93 100644
--- a/Documentation/devicetree/bindings/mfd/twl6040.txt
+++ b/Documentation/devicetree/bindings/mfd/twl6040.txt
@@ -19,6 +19,8 @@ Required properties:
 
 Optional properties, nodes:
 - enable-active-high: To power on the twl6040 during boot.
+- clocks: phandle to the clk32k clock provider
+- clock-names: Must be "clk32k"
 
 Vibra functionality
 Required properties: