Merge tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Changes are seen in a wide range of codes, mainly due to ASoC DAPM
  requirements; HD-audio shows a high peak in diffstat, it's just a
  removal of bunch of old static quirks.

  Some highlights:

   - HDPM: Updates for AIO/RayDAT support, TCO/sync support

   - RME96: Add PCM sync support

   - HD-audio:

     * A few HDMI/DP audio updates (CA assignment fix, stream switching
       fix, Intel DP device list support)
     * Device specific fixes (ASUS/CXT HP mic support, Thinkpad mic
       improvements, Chromebook fixes, STAC9228 Dell fixes)
     * Replace the all static quirks for AD codecs with the generic
       parser
     * WAKEEN support for handling irqs in the power saving mode

   - USB-audio: Clean up implicit fb handling and related codes

   - DAPM is now mandatory for ASoC CODEC drivers; all existing drivers
     have had some level of DAPM support added.  In addition, a lot of
     cleanups and improvements in DAPM.

   - Support for ASoC cross-platform compile test

   - New drivers and support for Analog Devices ADAU1702 and
     ADAU1401(a), Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and
     WM8904 based machines, Freescale S/PDIF and SSI AC'97, Renesas
     R-Car SoCs, Samsung Exynos5420 SoCs, Texas Instruments PCM1681 and
     PCM1792A and Wolfson Microelectronics WM8997

   - DT bindings for kirkwood and i.MX S/PDIF

   - Clean up and bug fixes: ssm2602, rt5640 and sgtl5000.

   - Core helpers for bitbanged AC'97 reset"

* tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (375 commits)
  ALSA: hda - Re-setup HDMI pin and audio infoframe on stream switches
  ALSA: hda - hdmi: Fallback to ALSA allocation when selecting CA
  ASoC: mxs-sgtl5000: Configure the dai_links as unidirectional
  ASoC: soc-pcm: Allow to specify unidirectional dai_link
  ASoC: fsl_spdif: Staticse non-exported symbols
  ASoC: ssm2602: Fix cache sync
  ASoC: Remove unused sysfs_registered field from snd_soc_codec struct
  ASoC: Remove unused debugfs_dapm field from snd_soc_{platform,codec} struct
  ASoC: Remove unused control_type field from snd_soc_codec struct
  ASoC: fsl: Add one blank space after ':=' in Makefile
  ASoC: fsl: Add wrapping for dev_dbg() in fsl_spdif.c
  ASoC: rt5640: change widget sequence for depop
  ASoC: dapm: Fix auto-disable for inverted controls
  ASoC: fsl: Drop SND_SOC_FSL_UTILS from SND_SOC_IMX_SPDIF
  ASoC: Samsung: Do not queue cyclic buffers multiple times
  ASoC: ep93xx-i2s: Remove unnecessary dev_set_drvdata()
  ASoC: designware_i2s: Remove unnecessary dev_set_drvdata()
  ASoC: fsl_spdif: remove redundant dev_err call in fsl_spdif_probe()
  ASoC: fsl: Add S/PDIF machine driver
  ASoc: kirkwood: Use the Kirkwood audio driver in Dove boards
  ...

27 files changed, 551 insertions, 107 deletions

diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
index 38e51ad2e07..a45ae08c8ed 100644
--- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
+++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -7,9 +7,30 @@ Required properties:
 - reg: Should contain SSC registers location and length
 - interrupts: Should contain SSC interrupt
 
-Example:
+
+Required properties for devices compatible with "atmel,at91sam9g45-ssc":
+- dmas: DMA specifier, consisting of a phandle to DMA controller node,
+  the memory interface and SSC DMA channel ID (for tx and rx).
+  See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
+- dma-names: Must be "tx", "rx".
+
+Examples:
+- PDC transfer:
 ssc0: ssc@fffbc000 {
 	compatible = "atmel,at91rm9200-ssc";
 	reg = <0xfffbc000 0x4000>;
 	interrupts = <14 4 5>;
 };
+
+- DMA transfer:
+ssc0: ssc@f0010000 {
+      compatible = "atmel,at91sam9g45-ssc";
+      reg = <0xf0010000 0x4000>;
+      interrupts = <28 4 5>;
+      dmas = <&dma0 1 13>,
+	     <&dma0 1 14>;
+      dma-names = "tx", "rx";
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+      status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt
new file mode 100644
index 00000000000..669b8140dd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt
@@ -0,0 +1,65 @@
+Device tree bindings for Marvell PXA SSP ports
+
+Required properties:
+
+	- compatible:	Must be one of
+				mrvl,pxa25x-ssp
+				mvrl,pxa25x-nssp
+				mrvl,pxa27x-ssp
+				mrvl,pxa3xx-ssp
+				mvrl,pxa168-ssp
+				mrvl,pxa910-ssp
+				mrvl,ce4100-ssp
+				mrvl,lpss-ssp
+
+	- reg:		The memory base
+	- dmas:		Two dma phandles, one for rx, one for tx
+	- dma-names:	Must be "rx", "tx"
+
+
+Example for PXA3xx:
+
+	ssp0: ssp@41000000 {
+		compatible = "mrvl,pxa3xx-ssp";
+		reg = <0x41000000 0x40>;
+		ssp-id = <1>;
+		interrupts = <24>;
+		clock-names = "pxa27x-ssp.0";
+		dmas = <&dma 13
+			&dma 14>;
+		dma-names = "rx", "tx";
+	};
+
+	ssp1: ssp@41700000 {
+		compatible = "mrvl,pxa3xx-ssp";
+		reg = <0x41700000 0x40>;
+		ssp-id = <2>;
+		interrupts = <16>;
+		clock-names = "pxa27x-ssp.1";
+		dmas = <&dma 15
+			&dma 16>;
+		dma-names = "rx", "tx";
+	};
+
+	ssp2: ssp@41900000 {
+		compatibl3 = "mrvl,pxa3xx-ssp";
+		reg = <0x41900000 0x40>;
+		ssp-id = <3>;
+		interrupts = <0>;
+		clock-names = "pxa27x-ssp.2";
+		dmas = <&dma 66
+			&dma 67>;
+		dma-names = "rx", "tx";
+	};
+
+	ssp3: ssp@41a00000 {
+		compatible = "mrvl,pxa3xx-ssp";
+		reg = <0x41a00000 0x40>;
+		ssp-id = <4>;
+		interrupts = <13>;
+		clock-names = "pxa27x-ssp.3";
+		dmas = <&dma 2
+			&dma 3>;
+		dma-names = "rx", "tx";
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/ak4554.c b/Documentation/devicetree/bindings/sound/ak4554.c
new file mode 100644
index 00000000000..934fa02754b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak4554.c
@@ -0,0 +1,11 @@
+AK4554 ADC/DAC
+
+Required properties:
+
+  - compatible : "asahi-kasei,ak4554"
+
+Example:
+
+ak4554-adc-dac {
+	compatible = "asahi-kasei,ak4554";
+};
diff --git a/Documentation/devicetree/bindings/sound/alc5632.txt b/Documentation/devicetree/bindings/sound/alc5632.txt
index 8608f747dcf..ffd886d110b 100644
--- a/Documentation/devicetree/bindings/sound/alc5632.txt
+++ b/Documentation/devicetree/bindings/sound/alc5632.txt
@@ -13,6 +13,25 @@ Required properties:
   - #gpio-cells : Should be two. The first cell is the pin number and the
     second cell is used to specify optional parameters (currently unused).
 
+Pins on the device (for linking into audio routes):
+
+  * SPK_OUTP
+  * SPK_OUTN
+  * HP_OUT_L
+  * HP_OUT_R
+  * AUX_OUT_P
+  * AUX_OUT_N
+  * LINE_IN_L
+  * LINE_IN_R
+  * PHONE_P
+  * PHONE_N
+  * MIC1_P
+  * MIC1_N
+  * MIC2_P
+  * MIC2_N
+  * MICBIAS1
+  * DMICDAT
+
 Example:
 
 alc5632: alc5632@1e {
diff --git a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
new file mode 100644
index 00000000000..0720857089a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
@@ -0,0 +1,35 @@
+* Atmel at91sam9x5ek wm8731 audio complex
+
+Required properties:
+  - compatible: "atmel,sam9x5-wm8731-audio"
+  - atmel,model: The user-visible name of this sound complex.
+  - atmel,ssc-controller: The phandle of the SSC controller
+  - atmel,audio-codec: The phandle of the WM8731 audio codec
+  - atmel,audio-routing: A list of the connections between audio components.
+    Each entry is a pair of strings, the first being the connection's sink,
+    the second being the connection's source.
+
+Available audio endpoints for the audio-routing table:
+
+Board connectors:
+ * Headphone Jack
+ * Line In Jack
+
+wm8731 pins:
+cf Documentation/devicetree/bindings/sound/wm8731.txt
+
+Example:
+sound {
+	compatible = "atmel,sam9x5-wm8731-audio";
+
+	atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+	atmel,audio-routing =
+		"Headphone Jack", "RHPOUT",
+		"Headphone Jack", "LHPOUT",
+		"LLINEIN", "Line In Jack",
+		"RLINEIN", "Line In Jack";
+
+	atmel,ssc-controller = <&ssc0>;
+	atmel,audio-codec = <&wm8731>;
+};
diff --git a/Documentation/devicetree/bindings/sound/atmel-wm8904.txt b/Documentation/devicetree/bindings/sound/atmel-wm8904.txt
new file mode 100644
index 00000000000..8bbe50c884b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel-wm8904.txt
@@ -0,0 +1,55 @@
+Atmel ASoC driver with wm8904 audio codec complex
+
+Required properties:
+  - compatible: "atmel,asoc-wm8904"
+  - atmel,model: The user-visible name of this sound complex.
+  - atmel,audio-routing: A list of the connections between audio components.
+    Each entry is a pair of strings, the first being the connection's sink,
+    the second being the connection's source. Valid names for sources and
+    sinks are the WM8904's pins, and the jacks on the board:
+
+    WM8904 pins:
+
+    * IN1L
+    * IN1R
+    * IN2L
+    * IN2R
+    * IN3L
+    * IN3R
+    * HPOUTL
+    * HPOUTR
+    * LINEOUTL
+    * LINEOUTR
+    * MICBIAS
+
+    Board connectors:
+
+    * Headphone Jack
+    * Line In Jack
+    * Mic
+
+  - atmel,ssc-controller: The phandle of the SSC controller
+  - atmel,audio-codec: The phandle of the WM8904 audio codec
+
+Optional properties:
+  - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
+
+Example:
+sound {
+	compatible = "atmel,asoc-wm8904";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+	atmel,model = "wm8904 @ AT91SAM9N12EK";
+
+	atmel,audio-routing =
+		"Headphone Jack", "HPOUTL",
+		"Headphone Jack", "HPOUTR",
+		"IN2L", "Line In Jack",
+		"IN2R", "Line In Jack",
+		"Mic", "MICBIAS",
+		"IN1L", "Mic";
+
+	atmel,ssc-controller = <&ssc0>;
+	atmel,audio-codec = <&wm8904>;
+};
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
new file mode 100644
index 00000000000..f2ae335670f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
@@ -0,0 +1,54 @@
+Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
+
+The Freescale S/PDIF audio block is a stereo transceiver that allows the
+processor to receive and transmit digital audio via an coaxial cable or
+a fibre cable.
+
+Required properties:
+
+  - compatible : Compatible list, must contain "fsl,imx35-spdif".
+
+  - reg : Offset and length of the register set for the device.
+
+  - interrupts : Contains the spdif interrupt.
+
+  - dmas : Generic dma devicetree binding as described in
+  Documentation/devicetree/bindings/dma/dma.txt.
+
+  - dma-names : Two dmas have to be defined, "tx" and "rx".
+
+  - clocks : Contains an entry for each entry in clock-names.
+
+  - clock-names : Includes the following entries:
+	"core"		The core clock of spdif controller
+	"rxtx<0-7>"	Clock source list for tx and rx clock.
+			This clock list should be identical to
+			the source list connecting to the spdif
+			clock mux in "SPDIF Transceiver Clock
+			Diagram" of SoC reference manual. It
+			can also be referred to TxClk_Source
+			bit of register SPDIF_STC.
+
+Example:
+
+spdif: spdif@02004000 {
+	compatible = "fsl,imx35-spdif";
+	reg = <0x02004000 0x4000>;
+	interrupts = <0 52 0x04>;
+	dmas = <&sdma 14 18 0>,
+	       <&sdma 15 18 0>;
+	dma-names = "rx", "tx";
+
+	clocks = <&clks 197>, <&clks 3>,
+	       <&clks 197>, <&clks 107>,
+	       <&clks 0>, <&clks 118>,
+	       <&clks 62>, <&clks 139>,
+	       <&clks 0>;
+	clock-names = "core", "rxtx0",
+		"rxtx1", "rxtx2",
+		"rxtx3", "rxtx4",
+		"rxtx5", "rxtx6",
+		"rxtx7";
+
+	status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
index 5ff76c9c57d..4303b6ab620 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
@@ -43,10 +43,22 @@ Required properties:
                     together.  This would still allow different sample sizes,
                     but not different sample rates.
 
+Required are also ac97 link bindings if ac97 is used. See
+Documentation/devicetree/bindings/sound/soc-ac97link.txt for the necessary
+bindings.
+
 Optional properties:
 - codec-handle:     Phandle to a 'codec' node that defines an audio
                     codec connected to this SSI.  This node is typically
                     a child of an I2C or other control node.
+- fsl,fiq-stream-filter: Bool property. Disabled DMA and use FIQ instead to
+		    filter the codec stream. This is necessary for some boards
+		    where an incompatible codec is connected to this SSI, e.g.
+		    on pca100 and pcm043.
+- dmas:		    Generic dma devicetree binding as described in
+		    Documentation/devicetree/bindings/dma/dma.txt.
+- dma-names:	    Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq
+		    is not defined.
 
 Child 'codec' node required properties:
 - compatible:       Compatible list, contains the name of the codec
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt
new file mode 100644
index 00000000000..7d13479f9c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt
@@ -0,0 +1,34 @@
+Freescale i.MX audio complex with S/PDIF transceiver
+
+Required properties:
+
+  - compatible : "fsl,imx-audio-spdif"
+
+  - model : The user-visible name of this sound complex
+
+  - spdif-controller : The phandle of the i.MX S/PDIF controller
+
+
+Optional properties:
+
+  - spdif-out : This is a boolean property. If present, the transmitting
+    function of S/PDIF will be enabled, indicating there's a physical
+    S/PDIF out connector/jack on the board or it's connecting to some
+    other IP block, such as an HDMI encoder/display-controller.
+
+  - spdif-in : This is a boolean property. If present, the receiving
+    function of S/PDIF will be enabled, indicating there's a physical
+    S/PDIF in connector/jack on the board.
+
+* Note: At least one of these two properties should be set in the DT binding.
+
+
+Example:
+
+sound-spdif {
+	compatible = "fsl,imx-audio-spdif";
+	model = "imx-spdif";
+	spdif-controller = <&spdif>;
+	spdif-out;
+	spdif-in;
+};
diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.txt b/Documentation/devicetree/bindings/sound/imx-audmux.txt
index 215aa981721..f88a00e54c6 100644
--- a/Documentation/devicetree/bindings/sound/imx-audmux.txt
+++ b/Documentation/devicetree/bindings/sound/imx-audmux.txt
@@ -5,6 +5,15 @@ Required properties:
   or "fsl,imx31-audmux" for the version firstly used on i.MX31.
 - reg : Should contain AUDMUX registers location and length
 
+An initial configuration can be setup using child nodes.
+
+Required properties of optional child nodes:
+- fsl,audmux-port : Integer of the audmux port that is configured by this
+  child node.
+- fsl,port-config : List of configuration options for the specific port. For
+  imx31-audmux and above, it is a list of tuples <ptcr pdcr>. For
+  imx21-audmux it is a list of pcr values.
+
 Example:
 
 audmux@021d8000 {
diff --git a/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt
new file mode 100644
index 00000000000..74c9ba6c282
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt
@@ -0,0 +1,28 @@
+Marvell PXA SSP CPU DAI bindings
+
+Required properties:
+
+	compatible	Must be "mrvl,pxa-ssp-dai"
+	port		A phandle reference to a PXA ssp upstream device
+
+Example:
+
+	/* upstream device */
+
+	ssp0: ssp@41000000 {
+		compatible = "mrvl,pxa3xx-ssp";
+		reg = <0x41000000 0x40>;
+		interrupts = <24>;
+		clock-names = "pxa27x-ssp.0";
+		dmas = <&dma 13
+			&dma 14>;
+		dma-names = "rx", "tx";
+	};
+
+	/* DAI as user */
+
+	ssp_dai0: ssp_dai@0 {
+		compatible = "mrvl,pxa-ssp-dai";
+		port = <&ssp0>;
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt b/Documentation/devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt
new file mode 100644
index 00000000000..551fbb8348c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt
@@ -0,0 +1,15 @@
+DT bindings for ARM PXA2xx PCM platform driver
+
+This is just a dummy driver that registers the PXA ASoC platform driver.
+It does not have any resources assigned.
+
+Required properties:
+
+	- compatible		'mrvl,pxa-pcm-audio'
+
+Example:
+
+	pxa_pcm_audio: snd_soc_pxa_audio {
+		compatible = "mrvl,pxa-pcm-audio";
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/mvebu-audio.txt b/Documentation/devicetree/bindings/sound/mvebu-audio.txt
new file mode 100644
index 00000000000..7e5fd37c1b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mvebu-audio.txt
@@ -0,0 +1,29 @@
+* mvebu (Kirkwood, Dove, Armada 370) audio controller
+
+Required properties:
+
+- compatible: "marvell,mvebu-audio"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- interrupts: list of two irq numbers.
+  The first irq is used for data flow and the second one is used for errors.
+
+- clocks: one or two phandles.
+  The first one is mandatory and defines the internal clock.
+  The second one is optional and defines an external clock.
+
+- clock-names: names associated to the clocks:
+	"internal" for the internal clock
+	"extclk" for the external clock
+
+Example:
+
+i2s1: audio-controller@b4000 {
+	compatible = "marvell,mvebu-audio";
+	reg = <0xb4000 0x2210>;
+	interrupts = <21>, <22>;
+	clocks = <&gate_clk 13>;
+	clock-names = "internal";
+};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
index 05ffecb5710..8b8903ef080 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
@@ -11,28 +11,8 @@ Required properties:
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
   the second being the connection's source. Valid names for sources and
-  sinks are the ALC5632's pins:
-
-  ALC5632 pins:
-
-  * SPK_OUTP
-  * SPK_OUTN
-  * HP_OUT_L
-  * HP_OUT_R
-  * AUX_OUT_P
-  * AUX_OUT_N
-  * LINE_IN_L
-  * LINE_IN_R
-  * PHONE_P
-  * PHONE_N
-  * MIC1_P
-  * MIC1_N
-  * MIC2_P
-  * MIC2_N
-  * MICBIAS1
-  * DMICDAT
-
-  Board connectors:
+  sinks are the ALC5632's pins as documented in the binding for the device
+  and:
 
   * Headset Stereophone
   * Int Spk
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
index d130818700b..dc6224994d6 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
@@ -11,32 +11,12 @@ Required properties:
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
   the second being the connection's source. Valid names for sources and
-  sinks are the RT5640's pins, and the jacks on the board:
-
-  RT5640 pins:
-
-  * DMIC1
-  * DMIC2
-  * MICBIAS1
-  * IN1P
-  * IN1R
-  * IN2P
-  * IN2R
-  * HPOL
-  * HPOR
-  * LOUTL
-  * LOUTR
-  * MONOP
-  * MONON
-  * SPOLP
-  * SPOLN
-  * SPORP
-  * SPORN
-
-  Board connectors:
+  sinks are the RT5640's pins (as documented in its binding), and the jacks
+  on the board:
 
   * Headphones
   * Speakers
+  * Mic Jack
 
 - nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
   connected to the CODEC.
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
index d14510613a7..aab6ce0ad2f 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
@@ -11,31 +11,8 @@ Required properties:
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
   the second being the connection's source. Valid names for sources and
-  sinks are the WM8753's pins, and the jacks on the board:
-
-  WM8753 pins:
-
-  * LOUT1
-  * LOUT2
-  * ROUT1
-  * ROUT2
-  * MONO1
-  * MONO2
-  * OUT3
-  * OUT4
-  * LINE1
-  * LINE2
-  * RXP
-  * RXN
-  * ACIN
-  * ACOP
-  * MIC1N
-  * MIC1
-  * MIC2N
-  * MIC2
-  * Mic Bias
-
-  Board connectors:
+  sinks are the WM8753's pins as documented in the binding for the WM8753,
+  and the jacks on the board:
 
   * Headphone Jack
   * Mic Jack
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
index 3bf722deb72..4b44dfb6ca0 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
@@ -11,28 +11,8 @@ Required properties:
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
   the second being the connection's source. Valid names for sources and
-  sinks are the WM8903's pins, and the jacks on the board:
-
-  WM8903 pins:
-
-  * IN1L
-  * IN1R
-  * IN2L
-  * IN2R
-  * IN3L
-  * IN3R
-  * DMICDAT
-  * HPOUTL
-  * HPOUTR
-  * LINEOUTL
-  * LINEOUTR
-  * LOP
-  * LON
-  * ROP
-  * RON
-  * MICBIAS
-
-  Board connectors:
+  sinks are the WM8903's pins (documented in the WM8903 binding document),
+  and the jacks on the board:
 
   * Headphone Jack
   * Int Spk
diff --git a/Documentation/devicetree/bindings/sound/pcm1792a.txt b/Documentation/devicetree/bindings/sound/pcm1792a.txt
new file mode 100644
index 00000000000..970ba1ed576
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/pcm1792a.txt
@@ -0,0 +1,18 @@
+Texas Instruments pcm1792a DT bindings
+
+This driver supports the SPI bus.
+
+Required properties:
+
+ - compatible: "ti,pcm1792a"
+
+For required properties on SPI, please consult
+Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Examples:
+
+	codec_spi: 1792a@0 {
+		compatible = "ti,pcm1792a";
+		spi-max-frequency = <600000>;
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt
index 005bcb24d72..068a1141b06 100644
--- a/Documentation/devicetree/bindings/sound/rt5640.txt
+++ b/Documentation/devicetree/bindings/sound/rt5640.txt
@@ -18,6 +18,26 @@ Optional properties:
 
 - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
 
+Pins on the device (for linking into audio routes):
+
+  * DMIC1
+  * DMIC2
+  * MICBIAS1
+  * IN1P
+  * IN1R
+  * IN2P
+  * IN2R
+  * HPOL
+  * HPOR
+  * LOUTL
+  * LOUTR
+  * MONOP
+  * MONON
+  * SPOLP
+  * SPOLN
+  * SPORP
+  * SPORN
+
 Example:
 
 rt5640 {
diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
index 025e66b85a4..7386d444ada 100644
--- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
@@ -2,7 +2,15 @@
 
 Required SoC Specific Properties:
 
-- compatible : "samsung,i2s-v5"
+- compatible : should be one of the following.
+   - samsung,s3c6410-i2s: for 8/16/24bit stereo I2S.
+   - samsung,s5pv210-i2s: for 8/16/24bit multichannel(5.1) I2S with
+     secondary fifo, s/w reset control and internal mux for root clk src.
+   - samsung,exynos5420-i2s: for 8/16/24bit multichannel(7.1) I2S with
+     secondary fifo, s/w reset control, internal mux for root clk src and
+     TDM support. TDM (Time division multiplexing) is to allow transfer of
+     multiple channel audio data on single data line.
+
 - reg: physical base address of the controller and length of memory mapped
   region.
 - dmas: list of DMA controller phandle and DMA request line ordered pairs.
@@ -21,13 +29,6 @@ Required SoC Specific Properties:
 
 Optional SoC Specific Properties:
 
-- samsung,supports-6ch: If the I2S Primary sound source has 5.1 Channel
-  support, this flag is enabled.
-- samsung,supports-rstclr: This flag should be set if I2S software reset bit
-  control is required. When this flag is set I2S software reset bit will be
-  enabled or disabled based on need.
-- samsung,supports-secdai:If I2S block has a secondary FIFO and internal DMA,
-  then this flag is enabled.
 - samsung,idma-addr: Internal DMA register base address of the audio
   sub system(used in secondary sound source).
 - pinctrl-0: Should specify pin control groups used for this controller.
@@ -36,7 +37,7 @@ Optional SoC Specific Properties:
 Example:
 
 i2s0: i2s@03830000 {
-	compatible = "samsung,i2s-v5";
+	compatible = "samsung,s5pv210-i2s";
 	reg = <0x03830000 0x100>;
 	dmas = <&pdma0 10
 		&pdma0 9
@@ -46,9 +47,6 @@ i2s0: i2s@03830000 {
 		<&clock_audss EXYNOS_I2S_BUS>,
 		<&clock_audss EXYNOS_SCLK_I2S>;
 	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-	samsung,supports-6ch;
-	samsung,supports-rstclr;
-	samsung,supports-secdai;
 	samsung,idma-addr = <0x03000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2s0_bus>;
diff --git a/Documentation/devicetree/bindings/sound/soc-ac97link.txt b/Documentation/devicetree/bindings/sound/soc-ac97link.txt
new file mode 100644
index 00000000000..80152a87f23
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/soc-ac97link.txt
@@ -0,0 +1,28 @@
+AC97 link bindings
+
+These bindings can be included within any other device node.
+
+Required properties:
+ - pinctrl-names: Has to contain following states to setup the correct
+   pinmuxing for the used gpios:
+	"ac97-running": AC97-link is active
+	"ac97-reset": AC97-link reset state
+	"ac97-warm-reset": AC97-link warm reset state
+ - ac97-gpios: List of gpio phandles with args in the order ac97-sync,
+   ac97-sdata, ac97-reset
+
+
+Example:
+
+ssi {
+	...
+
+	pinctrl-names = "default", "ac97-running", "ac97-reset", "ac97-warm-reset";
+	pinctrl-0 = <&ac97link_running>;
+	pinctrl-1 = <&ac97link_running>;
+	pinctrl-2 = <&ac97link_reset>;
+	pinctrl-3 = <&ac97link_warm_reset>;
+	ac97-gpios = <&gpio3 20 0 &gpio3 22 0 &gpio3 28 0>;
+
+	...
+};
diff --git a/Documentation/devicetree/bindings/sound/ti,pcm1681.txt b/Documentation/devicetree/bindings/sound/ti,pcm1681.txt
new file mode 100644
index 00000000000..4df17185ab8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,pcm1681.txt
@@ -0,0 +1,15 @@
+Texas Instruments PCM1681 8-channel PWM Processor
+
+Required properties:
+
+ - compatible:		Should contain "ti,pcm1681".
+ - reg:			The i2c address. Should contain <0x4c>.
+
+Examples:
+
+	i2c_bus {
+		pcm1681@4c {
+			compatible = "ti,pcm1681";
+			reg = <0x4c>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
index f47c3f589fd..705a6b156c6 100644
--- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
@@ -3,7 +3,14 @@ Texas Instruments - tlv320aic3x Codec module
 The tlv320aic3x serial control bus communicates through I2C protocols
 
 Required properties:
-- compatible - "string" -  "ti,tlv320aic3x"
+
+- compatible - "string" - One of:
+    "ti,tlv320aic3x" - Generic TLV320AIC3x device
+    "ti,tlv320aic33" - TLV320AIC33
+    "ti,tlv320aic3007" - TLV320AIC3007
+    "ti,tlv320aic3106" - TLV320AIC3106
+
+
 - reg - <int> -  I2C slave address
 
 
diff --git a/Documentation/devicetree/bindings/sound/wm8731.txt b/Documentation/devicetree/bindings/sound/wm8731.txt
index 15f70048469..236690e99b8 100644
--- a/Documentation/devicetree/bindings/sound/wm8731.txt
+++ b/Documentation/devicetree/bindings/sound/wm8731.txt
@@ -16,3 +16,12 @@ codec: wm8731@1a {
 	compatible = "wlf,wm8731";
 	reg = <0x1a>;
 };
+
+Available audio endpoints for an audio-routing table:
+ * LOUT: Left Channel Line Output
+ * ROUT: Right Channel Line Output
+ * LHPOUT: Left Channel Headphone Output
+ * RHPOUT: Right Channel Headphone Output
+ * LLINEIN: Left Channel Line Input
+ * RLINEIN: Right Channel Line Input
+ * MICIN: Microphone Input
diff --git a/Documentation/devicetree/bindings/sound/wm8753.txt b/Documentation/devicetree/bindings/sound/wm8753.txt
index e65277a0fb6..8eee6128210 100644
--- a/Documentation/devicetree/bindings/sound/wm8753.txt
+++ b/Documentation/devicetree/bindings/sound/wm8753.txt
@@ -10,9 +10,31 @@ Required properties:
   - reg : the I2C address of the device for I2C, the chip select
           number for SPI.
 
+Pins on the device (for linking into audio routes):
+
+  * LOUT1
+  * LOUT2
+  * ROUT1
+  * ROUT2
+  * MONO1
+  * MONO2
+  * OUT3
+  * OUT4
+  * LINE1
+  * LINE2
+  * RXP
+  * RXN
+  * ACIN
+  * ACOP
+  * MIC1N
+  * MIC1
+  * MIC2N
+  * MIC2
+  * Mic Bias
+
 Example:
 
-codec: wm8737@1a {
+codec: wm8753@1a {
 	compatible = "wlf,wm8753";
 	reg = <0x1a>;
 };
diff --git a/Documentation/devicetree/bindings/sound/wm8903.txt b/Documentation/devicetree/bindings/sound/wm8903.txt
index f102cbc4269..94ec32c194b 100644
--- a/Documentation/devicetree/bindings/sound/wm8903.txt
+++ b/Documentation/devicetree/bindings/sound/wm8903.txt
@@ -28,6 +28,25 @@ Optional properties:
     performed. If any entry has the value 0xffffffff, that GPIO's
     configuration will not be modified.
 
+Pins on the device (for linking into audio routes):
+
+  * IN1L
+  * IN1R
+  * IN2L
+  * IN2R
+  * IN3L
+  * IN3R
+  * DMICDAT
+  * HPOUTL
+  * HPOUTR
+  * LINEOUTL
+  * LINEOUTR
+  * LOP
+  * LON
+  * ROP
+  * RON
+  * MICBIAS
+
 Example:
 
 codec: wm8903@1a {
diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt
index f2f3e80934d..e045e90a092 100644
--- a/Documentation/devicetree/bindings/sound/wm8994.txt
+++ b/Documentation/devicetree/bindings/sound/wm8994.txt
@@ -32,6 +32,10 @@ Optional properties:
     The second cell is the flags, encoded as the trigger masks from
     Documentation/devicetree/bindings/interrupts.txt
 
+  - clocks : A list of up to two phandle and clock specifier pairs
+  - clock-names : A list of clock names sorted in the same order as clocks.
+                  Valid clock names are "MCLK1" and "MCLK2".
+
   - wlf,gpio-cfg : A list of GPIO configuration register values. If absent,
     no configuration of these registers is performed. If any value is
     over 0xffff then the register will be left as default. If present 11