Merge branch 'kirkwood/drivers' of git://git.infradead.org/users/jcooper/linux into late/kirkwood

From Jason Cooper:

New drivers:
 - pinctrl (dove, kirkwood, mvebu)
 - gpio (mvebu)

* 'kirkwood/drivers' of git://git.infradead.org/users/jcooper/linux:
  arm: mvebu: add gpio support in defconfig
  arm: mvebu: add DT information for GPIO banks on Armada 370 and XP
  arm: mvebu: use GPIO support now that a driver is available
  Documentation: add description of DT binding for the gpio-mvebu driver
  gpio: introduce gpio-mvebu driver for Marvell SoCs
  arm: mvebu: select the pinctrl drivers for Armada 370 and Armada XP platforms
  arm: mvebu: split Kconfig options for Armada 370 and XP
  ARM: mvebu: adjust Armada XP evaluation board DTS
  ARM: mvebu: Add pinctrl support to Armada 370 SoC
  ARM: mvebu: Add pinctrl support to Armada XP SoCs
  pinctrl: mvebu: add pinctrl driver for Armada XP
  pinctrl: mvebu: add pinctrl driver for Armada 370
  pinctrl: mvebu: kirkwood pinctrl driver
  pinctrl: mvebu: dove pinctrl driver
  pinctrl: mvebu: pinctrl driver core

Signed-off-by: Olof Johansson <olof@lixom.net>

6 files changed, 645 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
new file mode 100644
index 00000000000..a6f3bec1da7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
@@ -0,0 +1,53 @@
+* Marvell EBU GPIO controller
+
+Required properties:
+
+- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio"
+  or "marvell,armadaxp-gpio". "marvell,orion-gpio" should be used for
+  Orion, Kirkwood, Dove, Discovery (except MV78200) and Armada
+  370. "marvell,mv78200-gpio" should be used for the Discovery
+  MV78200. "marvel,armadaxp-gpio" should be used for all Armada XP
+  SoCs (MV78230, MV78260, MV78460).
+
+- reg: Address and length of the register set for the device. Only one
+  entry is expected, except for the "marvell,armadaxp-gpio" variant
+  for which two entries are expected: one for the general registers,
+  one for the per-cpu registers.
+
+- interrupts: The list of interrupts that are used for all the pins
+  managed by this GPIO bank. There can be more than one interrupt
+  (example: 1 interrupt per 8 pins on Armada XP, which means 4
+  interrupts per bank of 32 GPIOs).
+
+- interrupt-controller: identifies the node as an interrupt controller
+
+- #interrupt-cells: specifies the number of cells needed to encode an
+  interrupt source. Should be two.
+  The first cell is the GPIO number.
+  The second cell is used to specify flags:
+    bits[3:0] trigger type and level flags:
+      1 = low-to-high edge triggered.
+      2 = high-to-low edge triggered.
+      4 = active high level-sensitive.
+      8 = active low level-sensitive.
+
+- gpio-controller: marks the device node as a gpio controller
+
+- ngpios: number of GPIOs this controller has
+
+- #gpio-cells: Should be two. The first cell is the pin number. The
+  second cell is reserved for flags, unused at the moment.
+
+Example:
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
new file mode 100644
index 00000000000..01ef408e205
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
@@ -0,0 +1,95 @@
+* Marvell Armada 370 SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6710-pinctrl"
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, uart0(rxd)
+mpp1          1        gpo, uart0(txd)
+mpp2          2        gpio, i2c0(sck), uart0(txd)
+mpp3          3        gpio, i2c0(sda), uart0(rxd)
+mpp4          4        gpio, cpu_pd(vdd)
+mpp5          5        gpo, ge0(txclko), uart1(txd), spi1(clk), audio(mclk)
+mpp6          6        gpio, ge0(txd0), sata0(prsnt), tdm(rst), audio(sdo)
+mpp7          7        gpo, ge0(txd1), tdm(tdx), audio(lrclk)
+mpp8          8        gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk)
+mpp9          9        gpo, ge0(txd3), uart1(txd), sd0(clk), audio(spdifo)
+mpp10         10       gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi)
+mpp11         11       gpio, ge0(rxd0), uart1(rxd), sd0(cmd), spi0(cs1),
+                       sata1(prsnt), spi1(cs1)
+mpp12         12       gpio, ge0(rxd1), i2c1(sda), sd0(d0), spi1(cs0),
+                       audio(spdifi)
+mpp13         13       gpio, ge0(rxd2), i2c1(sck), sd0(d1), tdm(pclk),
+                       audio(rmclk)
+mpp14         14       gpio, ge0(rxd3), pcie(clkreq0), sd0(d2), spi1(mosi),
+                       spi0(cs2)
+mpp15         15       gpio, ge0(rxctl), pcie(clkreq1), sd0(d3), spi1(miso),
+                       spi0(cs3)
+mpp16         16       gpio, ge0(rxclk), uart1(rxd), tdm(int), audio(extclk)
+mpp17         17       gpo, ge(mdc)
+mpp18         18       gpio, ge(mdio)
+mpp19         19       gpio, ge0(txclk), ge1(txclkout), tdm(pclk)
+mpp20         20       gpo, ge0(txd4), ge1(txd0)
+mpp21         21       gpo, ge0(txd5), ge1(txd1), uart1(txd)
+mpp22         22       gpo, ge0(txd6), ge1(txd2), uart0(rts)
+mpp23         23       gpo, ge0(txd7), ge1(txd3), spi1(mosi)
+mpp24         24       gpio, ge0(col), ge1(txctl), spi1(cs0)
+mpp25         25       gpio, ge0(rxerr), ge1(rxd0), uart1(rxd)
+mpp26         26       gpio, ge0(crs), ge1(rxd1), spi1(miso)
+mpp27         27       gpio, ge0(rxd4), ge1(rxd2), uart0(cts)
+mpp28         28       gpio, ge0(rxd5), ge1(rxd3)
+mpp29         29       gpio, ge0(rxd6), ge1(rxctl), i2c1(sda)
+mpp30         30       gpio, ge0(rxd7), ge1(rxclk), i2c1(sck)
+mpp31         31       gpio, tclk, ge0(txerr)
+mpp32         32       gpio, spi0(cs0)
+mpp33         33       gpio, dev(bootcs), spi0(cs0)
+mpp34         34       gpo, dev(wen0), spi0(mosi)
+mpp35         35       gpo, dev(oen), spi0(sck)
+mpp36         36       gpo, dev(a1), spi0(miso)
+mpp37         37       gpo, dev(a0), sata0(prsnt)
+mpp38         38       gpio, dev(ready), uart1(cts), uart0(cts)
+mpp39         39       gpo, dev(ad0), audio(spdifo)
+mpp40         40       gpio, dev(ad1), uart1(rts), uart0(rts)
+mpp41         41       gpio, dev(ad2), uart1(rxd)
+mpp42         42       gpo, dev(ad3), uart1(txd)
+mpp43         43       gpo, dev(ad4), audio(bclk)
+mpp44         44       gpo, dev(ad5), audio(mclk)
+mpp45         45       gpo, dev(ad6), audio(lrclk)
+mpp46         46       gpo, dev(ad7), audio(sdo)
+mpp47         47       gpo, dev(ad8), sd0(clk), audio(spdifo)
+mpp48         48       gpio, dev(ad9), uart0(rts), sd0(cmd), sata1(prsnt),
+                       spi0(cs1)
+mpp49         49       gpio, dev(ad10), pcie(clkreq1), sd0(d0), spi1(cs0),
+                       audio(spdifi)
+mpp50         50       gpio, dev(ad11), uart0(cts), sd0(d1), spi1(miso),
+                       audio(rmclk)
+mpp51         51       gpio, dev(ad12), i2c1(sda), sd0(d2), spi1(mosi)
+mpp52         52       gpio, dev(ad13), i2c1(sck), sd0(d3), spi1(sck)
+mpp53         53       gpio, dev(ad14), sd0(clk), tdm(pclk), spi0(cs2),
+                       pcie(clkreq1)
+mpp54         54       gpo, dev(ad15), tdm(dtx)
+mpp55         55       gpio, dev(cs1), uart1(txd), tdm(rst), sata1(prsnt),
+                       sata0(prsnt)
+mpp56         56       gpio, dev(cs2), uart1(cts), uart0(cts), spi0(cs3),
+                       pcie(clkreq0), spi1(cs1)
+mpp57         57       gpio, dev(cs3), uart1(rxd), tdm(fsync), sata0(prsnt),
+                       audio(sdo)
+mpp58         58       gpio, dev(cs0), uart1(rts), tdm(int), audio(extclk),
+                       uart0(rts)
+mpp59         59       gpo, dev(ale0), uart1(rts), uart0(rts), audio(bclk)
+mpp60         60       gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rst-out),
+                       audio(sdi)
+mpp61         61       gpo, dev(wen1), uart1(txd), audio(rclk)
+mpp62         62       gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0),
+                       audio(mclk), uart0(cts)
+mpp63         63       gpo, spi0(sck), tclk
+mpp64         64       gpio, spi0(miso), spi0-1(cs1)
+mpp65         65       gpio, spi0(mosi), spi0-1(cs2)
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
new file mode 100644
index 00000000000..bfa0a2e5e0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
@@ -0,0 +1,100 @@
+* Marvell Armada XP SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,mv78230-pinctrl", "marvell,mv78260-pinctrl",
+              "marvell,mv78460-pinctrl"
+
+This driver supports all Armada XP variants, i.e. mv78230, mv78260, and mv78460.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Armada XP (all variants)
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, ge0(txclko), lcd(d0)
+mpp1          1        gpio, ge0(txd0), lcd(d1)
+mpp2          2        gpio, ge0(txd1), lcd(d2)
+mpp3          3        gpio, ge0(txd2), lcd(d3)
+mpp4          4        gpio, ge0(txd3), lcd(d4)
+mpp5          5        gpio, ge0(txctl), lcd(d5)
+mpp6          6        gpio, ge0(rxd0), lcd(d6)
+mpp7          7        gpio, ge0(rxd1), lcd(d7)
+mpp8          8        gpio, ge0(rxd2), lcd(d8)
+mpp9          9        gpio, ge0(rxd3), lcd(d9)
+mpp10         10       gpio, ge0(rxctl), lcd(d10)
+mpp11         11       gpio, ge0(rxclk), lcd(d11)
+mpp12         12       gpio, ge0(txd4), ge1(txd0), lcd(d12)
+mpp13         13       gpio, ge0(txd5), ge1(txd1), lcd(d13)
+mpp14         14       gpio, ge0(txd6), ge1(txd2), lcd(d15)
+mpp15         15       gpio, ge0(txd7), ge1(txd3), lcd(d16)
+mpp16         16       gpio, ge0(txd7), ge1(txd3), lcd(d16)
+mpp17         17       gpio, ge0(col), ge1(txctl), lcd(d17)
+mpp18         18       gpio, ge0(rxerr), ge1(rxd0), lcd(d18), ptp(trig)
+mpp19         19       gpio, ge0(crs), ge1(rxd1), lcd(d19), ptp(evreq)
+mpp20         20       gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk)
+mpp21         21       gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat)
+mpp22         22       gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt)
+mpp23         23       gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt)
+mpp24         24       gpio, lcd(hsync), sata1(prsnt), nf(bootcs-re), tdm(rst)
+mpp25         25       gpio, lcd(vsync), sata0(prsnt), nf(bootcs-we), tdm(pclk)
+mpp26         26       gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd)
+mpp27         27       gpio, lcd(e), tdm(dtx), ptp(trig)
+mpp28         28       gpio, lcd(pwm), tdm(drx), ptp(evreq)
+mpp29         29       gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd)
+mpp30         30       gpio, tdm(int1), sd0(clk)
+mpp31         31       gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd)
+mpp32         32       gpio, tdm(int3), sd0(d0), vdd(cpu1-pd)
+mpp33         33       gpio, tdm(int4), sd0(d1), mem(bat)
+mpp34         34       gpio, tdm(int5), sd0(d2), sata0(prsnt)
+mpp35         35       gpio, tdm(int6), sd0(d3), sata1(prsnt)
+mpp36         36       gpio, spi(mosi)
+mpp37         37       gpio, spi(miso)
+mpp38         38       gpio, spi(sck)
+mpp39         39       gpio, spi(cs0)
+mpp40         40       gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd),
+                       pcie(clkreq0)
+mpp41         41       gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
+                       pcie(clkreq1)
+mpp42         42       gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer),
+                       vdd(cpu0-pd)
+mpp43         43       gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout),
+                       vdd(cpu2-3-pd){1}
+mpp44         44       gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2),
+                       mem(bat)
+mpp45         45       gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt)
+mpp46         46       gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt)
+mpp47         47       gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3),
+                       ref(clkout)
+mpp48         48       gpio, tclk, dev(burst/last)
+
+* Marvell Armada XP (mv78260 and mv78460 only)
+
+name          pins     functions
+================================================================================
+mpp49         49       gpio, dev(we3)
+mpp50         50       gpio, dev(we2)
+mpp51         51       gpio, dev(ad16)
+mpp52         52       gpio, dev(ad17)
+mpp53         53       gpio, dev(ad18)
+mpp54         54       gpio, dev(ad19)
+mpp55         55       gpio, dev(ad20), vdd(cpu0-pd)
+mpp56         56       gpio, dev(ad21), vdd(cpu1-pd)
+mpp57         57       gpio, dev(ad22), vdd(cpu2-3-pd){1}
+mpp58         58       gpio, dev(ad23)
+mpp59         59       gpio, dev(ad24)
+mpp60         60       gpio, dev(ad25)
+mpp61         61       gpio, dev(ad26)
+mpp62         62       gpio, dev(ad27)
+mpp63         63       gpio, dev(ad28)
+mpp64         64       gpio, dev(ad29)
+mpp65         65       gpio, dev(ad30)
+mpp66         66       gpio, dev(ad31)
+
+Notes:
+* {1} vdd(cpu2-3-pd) only available on mv78460.
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
new file mode 100644
index 00000000000..a648aaad611
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
@@ -0,0 +1,72 @@
+* Marvell Dove SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,dove-pinctrl"
+- clocks: (optional) phandle of pdma clock
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm)
+mpp1          1        gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm)
+mpp2          2        gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt),
+                       uart1(rts)
+mpp3          3        gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act),
+                       uart1(cts), lcd-spi(cs1)
+mpp4          4        gpio, pmu, uart3(rts), sdio1(cd), spi1(miso)
+mpp5          5        gpio, pmu, uart3(cts), sdio1(wp), spi1(cs)
+mpp6          6        gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi)
+mpp7          7        gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck)
+mpp8          8        gpio, pmu, watchdog(rstout)
+mpp9          9        gpio, pmu, pex1(clkreq)
+mpp10         10       gpio, pmu, ssp(sclk)
+mpp11         11       gpio, pmu, sata(prsnt), sata-1(act), sdio0(ledctrl),
+                       sdio1(ledctrl), pex0(clkreq)
+mpp12         12       gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd), sata(act)
+mpp13         13       gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp),
+                       ssp(extclk)
+mpp14         14       gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd)
+mpp15         15       gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm)
+mpp16         16       gpio, uart3(rts), sdio0(cd), ac97(sdi1), lcd-spi(cs1)
+mpp17         17       gpio, uart3(cts), sdio0(wp), ac97(sdi2), twsi(sda),
+                       ac97-1(sysclko)
+mpp18         18       gpio, uart3(txd), sdio0(buspwr), ac97(sdi3), lcd0(pwm)
+mpp19         19       gpio, uart3(rxd), sdio0(ledctrl), twsi(sck)
+mpp20         20       gpio, sdio0(cd), sdio1(cd), spi1(miso), lcd-spi(miso),
+                       ac97(sysclko)
+mpp21         21       gpio, sdio0(wp), sdio1(wp), spi1(cs), lcd-spi(cs0),
+                       uart1(cts), ssp(sfrm)
+mpp22         22       gpio, sdio0(buspwr), sdio1(buspwr), spi1(mosi),
+                       lcd-spi(mosi), uart1(cts), ssp(txd)
+mpp23         23       gpio, sdio0(ledctrl), sdio1(ledctrl), spi1(sck),
+                       lcd-spi(sck), ssp(sclk)
+mpp_camera    24-39    gpio, camera
+mpp_sdio0     40-45    gpio, sdio0
+mpp_sdio1     46-51    gpio, sdio1
+mpp_audio1    52-57    gpio, i2s1/spdifo, i2s1, spdifo, twsi, ssp/spdifo, ssp,
+                       ssp/twsi
+mpp_spi0      58-61    gpio, spi0
+mpp_uart1     62-63    gpio, uart1
+mpp_nand      64-71    gpo, nand
+audio0        -        i2s, ac97
+twsi          -        none, opt1, opt2, opt3
+
+Notes:
+* group "mpp_audio1" allows the following functions and gpio pins:
+  - gpio          : gpio on pins 52-57
+  - i2s1/spdifo   : audio1 i2s on pins 52-55 and spdifo on 57, no gpios
+  - i2s1          : audio1 i2s on pins 52-55, gpio on pins 56,57
+  - spdifo        : spdifo on pin 57, gpio on pins 52-55
+  - twsi          : twsi on pins 56,57, gpio on pins 52-55
+  - ssp/spdifo    : ssp on pins 52-55, spdifo on pin 57, no gpios
+  - ssp           : ssp on pins 52-55, gpio on pins 56,57
+  - ssp/twsi      : ssp on pins 52-55, twsi on pins 56,57, no gpios
+* group "audio0" internally muxes i2s0 or ac97 controller to the dedicated
+  audio0 pins.
+* group "twsi" internally muxes twsi controller to the dedicated or option pins.
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
new file mode 100644
index 00000000000..361bccb7ec8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
@@ -0,0 +1,279 @@
+* Marvell Kirkwood SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6180-pinctrl",
+              "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl",
+              "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl"
+
+This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Kirkwood 88f6180
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
+mpp17         17       gpio, sdio(d3)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, mii(rxerr)
+mpp21         21       gpio, audio(spdifi)
+mpp22         22       gpio, audio(spdifo)
+mpp23         23       gpio, audio(rmclk)
+mpp24         24       gpio, audio(bclk)
+mpp25         25       gpio, audio(sdo)
+mpp26         26       gpio, audio(lrclk)
+mpp27         27       gpio, audio(mclk)
+mpp28         28       gpio, audio(sdi)
+mpp29         29       gpio, audio(extclk)
+
+* Marvell Kirkwood 88f6190
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0)
+mpp21         21       gpio, ge1(txd1), sata0(act)
+mpp22         22       gpio, ge1(txd2)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt)
+mpp24         24       gpio, ge1(rxd0)
+mpp25         25       gpio, ge1(rxd1)
+mpp26         26       gpio, ge1(rxd2)
+mpp27         27       gpio, ge1(rxd3)
+mpp28         28       gpio, ge1(col)
+mpp29         29       gpio, ge1(txclk)
+mpp30         30       gpio, ge1(rxclk)
+mpp31         31       gpio, ge1(rxclk)
+mpp32         32       gpio, ge1(txclko)
+mpp33         33       gpo, ge1(txclk)
+mpp34         34       gpio, ge1(txen)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr)
+
+* Marvell Kirkwood 88f6192
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx)
+mpp33         33       gpo, ge1(txclk), tdm(drx)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql)
+
+* Marvell Kirkwood 88f6281
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpio, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx)
+mpp33         33       gpo, ge1(txclk), tdm(drx)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1), sata1(act)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql)
+mpp36         36       gpio, ts(mp0), tdm(spi-cs1), audio(spdifi)
+mpp37         37       gpio, ts(mp1), tdm(tx2ql), audio(spdifo)
+mpp38         38       gpio, ts(mp2), tdm(rx2ql), audio(rmclk)
+mpp39         39       gpio, ts(mp3), tdm(spi-cs0), audio(bclk)
+mpp40         40       gpio, ts(mp4), tdm(spi-sck), audio(sdo)
+mpp41         41       gpio, ts(mp5), tdm(spi-miso), audio(lrclk)
+mpp42         42       gpio, ts(mp6), tdm(spi-mosi), audio(mclk)
+mpp43         43       gpio, ts(mp7), tdm(int), audio(sdi)
+mpp44         44       gpio, ts(mp8), tdm(rst), audio(extclk)
+mpp45         45       gpio, ts(mp9), tdm(pclk)
+mpp46         46       gpio, ts(mp10), tdm(fs)
+mpp47         47       gpio, ts(mp11), tdm(drx)
+mpp48         48       gpio, ts(mp12), tdm(dtx)
+mpp49         49       gpio, ts(mp9), tdm(rx0ql), ptp(clk)
+
+* Marvell Kirkwood 88f6282
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), sata1(act), lcd(hsync)
+mpp5          5        gpo, nand(io7), uart0(txd), sata0(act), lcd(vsync)
+mpp6          6        sysrst(out), spi(mosi)
+mpp7          7        gpo, spi(cs), lcd(pwm)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), mii(col),
+                       mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), mii(crs),
+                       sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), sata0(act)
+mpp12         12       gpo, sdio(clk), audio(spdifo), spi(mosi), twsi(sda)
+mpp13         13       gpio, sdio(cmd), uart1(txd), audio(rmclk), lcd(pwm)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt),
+                       audio(spdifi), audio-1(sdi)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act),
+                       spi(cs)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act), lcd(extclk)
+mpp17         17       gpio, sdio(d3), sata0(prsnt), sata1(act), twsi1(sck)
+mpp18         18       gpo, nand(io0), pex(clkreq)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act), lcd(d0)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo), lcd(d1)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt), lcd(d2)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk), lcd(d3)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo),
+                       lcd(d4)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk),
+                       lcd(d5)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk),
+                       lcd(d6)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi),
+                       lcd(d7)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk),
+                       lcd(d8)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst), lcd(d9)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk), lcd(d10)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs), lcd(d11)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx), lcd(d12)
+mpp33         33       gpo, ge1(txclk), tdm(drx), lcd(d13)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1), sata1(act), lcd(d14)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql),
+                       lcd(d15)
+mpp36         36       gpio, ts(mp0), tdm(spi-cs1), audio(spdifi), twsi1(sda)
+mpp37         37       gpio, ts(mp1), tdm(tx2ql), audio(spdifo), twsi1(sck)
+mpp38         38       gpio, ts(mp2), tdm(rx2ql), audio(rmclk), lcd(d18)
+mpp39         39       gpio, ts(mp3), tdm(spi-cs0), audio(bclk), lcd(d19)
+mpp40         40       gpio, ts(mp4), tdm(spi-sck), audio(sdo), lcd(d20)
+mpp41         41       gpio, ts(mp5), tdm(spi-miso), audio(lrclk), lcd(d21)
+mpp42         42       gpio, ts(mp6), tdm(spi-mosi), audio(mclk), lcd(d22)
+mpp43         43       gpio, ts(mp7), tdm(int), audio(sdi), lcd(d23)
+mpp44         44       gpio, ts(mp8), tdm(rst), audio(extclk), lcd(clk)
+mpp45         45       gpio, ts(mp9), tdm(pclk), lcd(e)
+mpp46         46       gpio, ts(mp10), tdm(fs), lcd(hsync)
+mpp47         47       gpio, ts(mp11), tdm(drx), lcd(vsync)
+mpp48         48       gpio, ts(mp12), tdm(dtx), lcd(d16)
+mpp49         49       gpo, tdm(rx0ql), pex(clkreq), lcd(d17)
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
new file mode 100644
index 00000000000..0a26c3aa4e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
@@ -0,0 +1,46 @@
+* Marvell SoC pinctrl core driver for mpp
+
+The pinctrl driver enables Marvell SoCs to configure the multi-purpose pins
+(mpp) to a specific function. For each SoC family there is a SoC specific
+driver using this core driver.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+A Marvell SoC pin configuration node is a node of a group of pins which can
+be used for a specific device or function. Each node requires one or more
+mpp pins or group of pins and a mpp function common to all pins.
+
+Required properties for pinctrl driver:
+- compatible: "marvell,<soc>-pinctrl"
+  Please refer to each marvell,<soc>-pinctrl.txt binding doc for supported SoCs.
+
+Required properties for pin configuration node:
+- marvell,pins: string array of mpp pins or group of pins to be muxed.
+- marvell,function: string representing a function to mux to for all
+    marvell,pins given in this pin configuration node. The function has to be
+    common for all marvell,pins. Please refer to marvell,<soc>-pinctrl.txt for
+    valid pin/pin group names and available function names for each SoC.
+
+Examples:
+
+uart1: serial@12100 {
+	compatible = "ns16550a";
+	reg = <0x12100 0x100>;
+	reg-shift = <2>;
+	interrupts = <7>;
+
+	pinctrl-0 = <&pmx_uart1_sw>;
+	pinctrl-names = "default";
+};
+
+pinctrl: pinctrl@d0200 {
+	compatible = "marvell,dove-pinctrl";
+	reg = <0xd0200 0x20>;
+
+	pmx_uart1_sw: pmx-uart1-sw {
+		marvell,pins = "mpp_uart1";
+		marvell,function = "uart1";
+	};
+};