Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux

Pull common clk framework changes from Michael Turquette:
 "This includes a small number of core framework improvments, platform
  ports and new DT bindings."

Fix up trivial conflicts in drivers/clk/Makefile

* tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (21 commits)
  clk: fix compile for OF && !COMMON_CLK
  clk: fix clk_get on of_clk_get_by_name return check
  clk: mxs: clk_register_clkdev mx28 usb clocks
  clk: add highbank clock support
  dt: add clock binding doc to primecell bindings
  clk: add DT fixed-clock binding support
  clk: add DT clock binding support
  ARM: integrator: convert to common clock
  clk: add versatile ICST307 driver
  ARM: integrator: put symbolic bus names on devices
  ARM: u300: convert to common clock
  clk: cache parent clocks only for muxes
  clk: wm831x: Add initial WM831x clock driver
  clk: Constify struct clk_init_data
  clk: Add CLK_IS_BASIC flag to identify basic clocks
  clk: Add support for rate table based dividers
  clk: Add support for power of two type dividers
  clk: mxs: imx28: decrease the frequency of ref_io1 for SSP2 and SSP3
  clk: mxs: add clkdev lookup for pwm
  clk: mxs: Fix the GPMI clock name
  ...

4 files changed, 161 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/primecell.txt b/Documentation/devicetree/bindings/arm/primecell.txt
index 951ca46789d..64fc82bc892 100644
--- a/Documentation/devicetree/bindings/arm/primecell.txt
+++ b/Documentation/devicetree/bindings/arm/primecell.txt
@@ -13,11 +13,17 @@ Required properties:
 Optional properties:
 
 - arm,primecell-periphid : Value to override the h/w value with
+- clocks : From common clock binding. First clock is phandle to clock for apb
+	pclk. Additional clocks are optional and specific to those peripherals.
+- clock-names : From common clock binding. Shall be "apb_pclk" for first clock.
 
 Example:
 
 serial@fff36000 {
 	compatible = "arm,pl011", "arm,primecell";
 	arm,primecell-periphid = <0x00341011>;
+	clocks = <&pclk>;
+	clock-names = "apb_pclk";
+	
 };
 
diff --git a/Documentation/devicetree/bindings/clock/calxeda.txt b/Documentation/devicetree/bindings/clock/calxeda.txt
new file mode 100644
index 00000000000..0a6ac1bdcda
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/calxeda.txt
@@ -0,0 +1,17 @@
+Device Tree Clock bindings for Calxeda highbank platform
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"calxeda,hb-pll-clock" - for a PLL clock
+	"calxeda,hb-a9periph-clock" - The A9 peripheral clock divided from the
+		A9 clock.
+	"calxeda,hb-a9bus-clock" - The A9 bus clock divided from the A9 clock.
+	"calxeda,hb-emmc-clock" - Divided clock for MMC/SD controller.
+- reg : shall be the control register offset from SYSREGs base for the clock.
+- clocks : shall be the input parent clock phandle for the clock. This is
+	either an oscillator or a pll output.
+- #clock-cells : from common clock binding; shall be set to 0.
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
new file mode 100644
index 00000000000..eb65d417f8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -0,0 +1,117 @@
+This binding is a work-in-progress, and are based on some experimental
+work by benh[1].
+
+Sources of clock signal can be represented by any node in the device
+tree.  Those nodes are designated as clock providers.  Clock consumer
+nodes use a phandle and clock specifier pair to connect clock provider
+outputs to clock inputs.  Similar to the gpio specifiers, a clock
+specifier is an array of one more more cells identifying the clock
+output on a device.  The length of a clock specifier is defined by the
+value of a #clock-cells property in the clock provider node.
+
+[1] http://patchwork.ozlabs.org/patch/31551/
+
+==Clock providers==
+
+Required properties:
+#clock-cells:	   Number of cells in a clock specifier; Typically 0 for nodes
+		   with a single clock output and 1 for nodes with multiple
+		   clock outputs.
+
+Optional properties:
+clock-output-names: Recommended to be a list of strings of clock output signal
+		    names indexed by the first cell in the clock specifier.
+		    However, the meaning of clock-output-names is domain
+		    specific to the clock provider, and is only provided to
+		    encourage using the same meaning for the majority of clock
+		    providers.  This format may not work for clock providers
+		    using a complex clock specifier format.  In those cases it
+		    is recommended to omit this property and create a binding
+		    specific names property.
+
+		    Clock consumer nodes must never directly reference
+		    the provider's clock-output-names property.
+
+For example:
+
+    oscillator {
+        #clock-cells = <1>;
+        clock-output-names = "ckil", "ckih";
+    };
+
+- this node defines a device with two clock outputs, the first named
+  "ckil" and the second named "ckih".  Consumer nodes always reference
+  clocks by index. The names should reflect the clock output signal
+  names for the device.
+
+==Clock consumers==
+
+Required properties:
+clocks:		List of phandle and clock specifier pairs, one pair
+		for each clock input to the device.  Note: if the
+		clock provider specifies '0' for #clock-cells, then
+		only the phandle portion of the pair will appear.
+
+Optional properties:
+clock-names:	List of clock input name strings sorted in the same
+		order as the clocks property.  Consumers drivers
+		will use clock-names to match clock input names
+		with clocks specifiers.
+clock-ranges:	Empty property indicating that child nodes can inherit named
+		clocks from this node. Useful for bus nodes to provide a
+		clock to their children.
+
+For example:
+
+    device {
+        clocks = <&osc 1>, <&ref 0>;
+        clock-names = "baud", "register";
+    };
+
+
+This represents a device with two clock inputs, named "baud" and "register".
+The baud clock is connected to output 1 of the &osc device, and the register
+clock is connected to output 0 of the &ref.
+
+==Example==
+
+    /* external oscillator */
+    osc: oscillator {
+        compatible = "fixed-clock";
+        #clock-cells = <1>;
+        clock-frequency  = <32678>;
+        clock-output-names = "osc";
+    };
+
+    /* phase-locked-loop device, generates a higher frequency clock
+     * from the external oscillator reference */
+    pll: pll@4c000 {
+        compatible = "vendor,some-pll-interface"
+        #clock-cells = <1>;
+        clocks = <&osc 0>;
+        clock-names = "ref";
+        reg = <0x4c000 0x1000>;
+        clock-output-names = "pll", "pll-switched";
+    };
+
+    /* UART, using the low frequency oscillator for the baud clock,
+     * and the high frequency switched PLL output for register
+     * clocking */
+    uart@a000 {
+        compatible = "fsl,imx-uart";
+        reg = <0xa000 0x1000>;
+        interrupts = <33>;
+        clocks = <&osc 0>, <&pll 1>;
+        clock-names = "baud", "register";
+    };
+
+This DT fragment defines three devices: an external oscillator to provide a
+low-frequency reference clock, a PLL device to generate a higher frequency
+clock signal, and a UART.
+
+* The oscillator is fixed-frequency, and provides one clock output, named "osc".
+* The PLL is both a clock provider and a clock consumer. It uses the clock
+  signal generated by the external oscillator, and provides two output signals
+  ("pll" and "pll-switched").
+* The UART has its baud clock connected the external oscillator and its
+  register clock connected to the PLL clock (the "pll-switched" signal)
diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.txt b/Documentation/devicetree/bindings/clock/fixed-clock.txt
new file mode 100644
index 00000000000..0b1fe782409
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fixed-clock.txt
@@ -0,0 +1,21 @@
+Binding for simple fixed-rate clock sources.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "fixed-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clock-frequency : frequency of clock in Hz. Should be a single cell.
+
+Optional properties:
+- gpios : From common gpio binding; gpio connection to clock enable pin.
+- clock-output-names : From common clock binding.
+
+Example:
+	clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000000>;
+	};