Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "Main features this time are:

   - BAM v1.3.0 support form qcom bam dma
   - support for Allwinner sun8i dma
   - atmels eXtended DMA Controller driver
   - chancnt cleanup by Maxime
   - fixes spread over drivers"

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (56 commits)
  dmaenegine: Delete a check before free_percpu()
  dmaengine: ioatdma: fix dma mapping errors
  dma: cppi41: add a delay while setting the TD bit
  dma: cppi41: wait longer for the HW to return the descriptor
  dmaengine: fsl-edma: fixup reg offset and hw S/G support in big-endian model
  dmaengine: fsl-edma: fix calculation of remaining bytes
  drivers/dma/pch_dma: declare pch_dma_id_table as static
  dmaengine: ste_dma40: fix error return code
  dma: imx-sdma: clarify about firmware not found error
  Documentation: devicetree: Fix Xilinx VDMA specification
  dmaengine: pl330: update author info
  dmaengine: clarify the issue_pending expectations
  dmaengine: at_xdmac: Add DMA_PRIVATE
  ARM: dts: at_xdmac: fix bad value of dma-cells in documentation
  dmaengine: at_xdmac: fix missing spin_unlock
  dmaengine: at_xdmac: fix a bug in transfer residue computation
  dmaengine: at_xdmac: fix software lockup at_xdmac_tx_status()
  dmaengine: at_xdmac: remove chancnt affectation
  dmaengine: at_xdmac: prefer usage of readl/writel_relaxed
  dmaengine: xdmac: fix print warning on dma_addr_t variable
  ...

4 files changed, 59 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
new file mode 100644
index 00000000000..0eb2b3207e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
@@ -0,0 +1,54 @@
+* Atmel Extensible Direct Memory Access Controller (XDMAC)
+
+* XDMA Controller
+Required properties:
+- compatible: Should be "atmel,<chip>-dma".
+  <chip> compatible description:
+  - sama5d4: first SoC adding the XDMAC
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain DMA interrupt.
+- #dma-cells: Must be <1>, used to represent the number of integer cells in
+the dmas property of client devices.
+  - The 1st cell specifies the channel configuration register:
+    - bit 13: SIF, source interface identifier, used to get the memory
+    interface identifier,
+    - bit 14: DIF, destination interface identifier, used to get the peripheral
+    interface identifier,
+    - bit 30-24: PERID, peripheral identifier.
+
+Example:
+
+dma1: dma-controller@f0004000 {
+	compatible = "atmel,sama5d4-dma";
+	reg = <0xf0004000 0x200>;
+	interrupts = <50 4 0>;
+	#dma-cells = <1>;
+};
+
+
+* DMA clients
+DMA clients connected to the Atmel XDMA controller must use the format
+described in the dma.txt file, using a one-cell specifier for each channel.
+The two cells in order are:
+1. A phandle pointing to the DMA controller.
+2. Channel configuration register. Configurable fields are:
+    - bit 13: SIF, source interface identifier, used to get the memory
+    interface identifier,
+    - bit 14: DIF, destination interface identifier, used to get the peripheral
+    interface identifier,
+  - bit 30-24: PERID, peripheral identifier.
+
+Example:
+
+i2c2: i2c@f8024000 {
+	compatible = "atmel,at91sam9x5-i2c";
+	reg = <0xf8024000 0x4000>;
+	interrupts = <34 4 6>;
+	dmas = <&dma1
+		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+		 | AT91_XDMAC_DT_PERID(6))>,
+	       <&dma1
+		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+		| AT91_XDMAC_DT_PERID(7))>;
+	dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 4659fd95230..dc8d3aac1aa 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -48,6 +48,7 @@ The full ID of peripheral types can be found below.
 	21	ESAI
 	22	SSI Dual FIFO	(needs firmware ver >= 2)
 	23	Shared ASRC
+	24	SAI
 
 The third cell specifies the transfer priority as below.
 
diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
index d75a9d76702..f8c3311b715 100644
--- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
+++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
@@ -1,7 +1,9 @@
 QCOM BAM DMA controller
 
 Required properties:
-- compatible: must contain "qcom,bam-v1.4.0" for MSM8974
+- compatible: must be one of the following:
+ * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
+ * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
 - reg: Address range for DMA registers
 - interrupts: Should contain the one interrupt shared by all channels
 - #dma-cells: must be <1>, the cell in the dmas property of the client device
diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
index 3e145c1675b..9cdcba24d7c 100644
--- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
@@ -4,7 +4,7 @@ This driver follows the generic DMA bindings defined in dma.txt.
 
 Required properties:
 
-- compatible:	Must be "allwinner,sun6i-a31-dma"
+- compatible:	Must be "allwinner,sun6i-a31-dma" or "allwinner,sun8i-a23-dma"
 - reg:		Should contain the registers base address and length
 - interrupts:	Should contain a reference to the interrupt used by this device
 - clocks:	Should contain a reference to the parent AHB clock