diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2014-12-04 16:57:36 +0100 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2014-12-04 16:57:36 +0100 |
| commit | a8afa2645ccf3525409c749c1dc4ec1cf95ff3f5 (patch) | |
| tree | 0148315475b348246201f4d57b7ed5802f76cfb2 /Documentation/devicetree | |
| parent | 136a713d80476fe993284bdf8b21709c179c9965 (diff) | |
| parent | f200890f224d9ed0af207145a2279f51c6be230b (diff) | |
Merge tag 'reset-for-3.19-2' of git://git.pengutronix.de/git/pza/linux into next/drivers
Pull "Reset controller changes for v3.19" from Philipp Zabel:
This adds a new driver for the sti soc family, and creates
a reset_control_status interface, which is added to the existing
drivers.
* tag 'reset-for-3.19-2' of git://git.pengutronix.de/git/pza/linux:
reset: add socfpga_reset_status
reset: sti: Document sti-picophyreset controllers bindings.
reset: stih407: Add softreset, powerdown and picophy controllers
reset: stih407: Add reset controllers DT bindings
reset: add reset_control_status helper function
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'Documentation/devicetree')
| -rw-r--r-- | Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt b/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt new file mode 100644 index 00000000000..54ae9f747e4 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt @@ -0,0 +1,42 @@ +STMicroelectronics STi family Sysconfig Picophy SoftReset Controller +============================================================================= + +This binding describes a reset controller device that is used to enable and +disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in +the STi family SoC system configuration registers. + +The actual action taken when softreset is asserted is hardware dependent. +However, when asserted it may not be possible to access the hardware's +registers and after an assert/deassert sequence the hardware's previous state +may no longer be valid. + +Please refer to Documentation/devicetree/bindings/reset/reset.txt +for common reset controller binding usage. + +Required properties: +- compatible: Should be "st,stih407-picophyreset" +- #reset-cells: 1, see below + +Example: + + picophyreset: picophyreset-controller { + compatible = "st,stih407-picophyreset"; + #reset-cells = <1>; + }; + +Specifying picophyreset control of devices +======================================= + +Device nodes should specify the reset channel required in their "resets" +property, containing a phandle to the picophyreset device node and an +index specifying which channel to use, as described in +Documentation/devicetree/bindings/reset/reset.txt. + +Example: + + usb2_picophy0: usbpicophy@0 { + resets = <&picophyreset STIH407_PICOPHY0_RESET>; + }; + +Macro definitions for the supported reset channels can be found in: +include/dt-bindings/reset-controller/stih407-resets.h |