Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform conversion patches from Olof Johansson:
 "Here are more patches in the progression towards multiplatform, sparse
  irq conversions in particular.

  Tegra has a handful of cleanups and general groundwork, but is not
  quite there yet on full enablement.

  Platforms that are enabled through this branch are VT8500 and Zynq.
  Note that i.MX was converted in one of the earlier cleanup branches as
  well (before we started a separate topic for multiplatform).  And both
  new platforms for this merge window, sunxi and bcm, were merged with
  multiplatform support enabled."

Fix up conflicts mostly as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM: zynq: Remove all unused mach headers
  ARM: zynq: add support for ARCH_MULTIPLATFORM
  ARM: zynq: make use of debug_ll_io_init()
  ARM: zynq: remove TTC early mapping
  ARM: tegra: move debug-macro.S to include/debug
  ARM: tegra: don't include iomap.h from debug-macro.S
  ARM: tegra: decouple uncompress.h and debug-macro.S
  ARM: tegra: simplify DEBUG_LL UART selection options
  ARM: tegra: select SPARSE_IRQ
  ARM: tegra: enhance timer.c to get IO address from device tree
  ARM: tegra: enhance timer.c to get IRQ info from device tree
  ARM: timer: fix checkpatch warnings
  ARM: tegra: add TWD to device tree
  ARM: tegra: define DT bindings for and instantiate RTC
  ARM: tegra: define DT bindings for and instantiate timer
  clocksource/mtu-nomadik: use apb_pclk
  clk: ux500: Register mtu apb_pclocks
  ARM: plat-nomadik: convert platforms to SPARSE_IRQ
  mfd/db8500-prcmu: use the irq_domain_add_simple()
  mfd/ab8500-core: use irq_domain_add_simple()
  ...

3 files changed, 63 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
new file mode 100644
index 00000000000..93f45e9dce7
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
@@ -0,0 +1,19 @@
+NVIDIA Tegra20 real-time clock
+
+The Tegra RTC maintains seconds and milliseconds counters, and five alarm
+registers. The alarms and other interrupts may wake the system from low-power
+state.
+
+Required properties:
+
+- compatible : should be "nvidia,tegra20-rtc".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A single interrupt specifier.
+
+Example:
+
+timer {
+	compatible = "nvidia,tegra20-rtc";
+	reg = <0x7000e000 0x100>;
+	interrupts = <0 2 0x04>;
+};
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
new file mode 100644
index 00000000000..e019fdc3877
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
@@ -0,0 +1,21 @@
+NVIDIA Tegra20 timer
+
+The Tegra20 timer provides four 29-bit timer channels and a single 32-bit free
+running counter. The first two channels may also trigger a watchdog reset.
+
+Required properties:
+
+- compatible : should be "nvidia,tegra20-timer".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 4 interrupts; one per timer channel.
+
+Example:
+
+timer {
+	compatible = "nvidia,tegra20-timer";
+	reg = <0x60005000 0x60>;
+	interrupts = <0 0 0x04
+			0 1 0x04
+			0 41 0x04
+			0 42 0x04>;
+};
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
new file mode 100644
index 00000000000..906109d4c59
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
@@ -0,0 +1,23 @@
+NVIDIA Tegra30 timer
+
+The Tegra30 timer provides ten 29-bit timer channels, a single 32-bit free
+running counter, and 5 watchdog modules. The first two channels may also
+trigger a legacy watchdog reset.
+
+Required properties:
+
+- compatible : should be "nvidia,tegra30-timer", "nvidia,tegra20-timer".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 6 interrupts; one per each of timer channels 1
+    through 5, and one for the shared interrupt for the remaining channels.
+
+timer {
+	compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+	reg = <0x60005000 0x400>;
+	interrupts = <0 0 0x04
+		      0 1 0x04
+		      0 41 0x04
+		      0 42 0x04
+		      0 121 0x04
+		      0 122 0x04>;
+};