Merge tag 'u300-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/soc

From Linus Walleij:

Device Tree and Multiplatform support for U300:
- Add devicetree support to timer, pinctrl (probe), I2C block,
  watchdog, DMA controller and clocks.
- Piecewise add a device tree containing all peripherals.
- Delete the ATAG boot path.
- Delete redundant platform data and board files.
- Convert to multiplatform.

* tag 'u300-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (40 commits)
  ARM: u300: switch to using syscon regmap for board
  ARM: u300: Update MMC configs for u300 defconfig
  spi: pl022: use DMA by default when probing from DT
  pinctrl: get rid of all platform data for coh901
  ARM: u300: convert MMC/SD clock to device tree
  ARM: u300: move the gated system controller clocks to DT
  i2c: stu300: do not request a specific clock name
  clk: move the U300 fixed and fixed-factor to DT
  ARM: u300: remove register definition file
  ARM: u300: add syscon node
  ARM: u300 use module_spi_driver to register driver
  ARM: u300: delete remnant machine headers
  ARM: u300: convert to multiplatform
  ARM: u300: localize <mach/u300-regs.h>
  ARM: u300: delete <mach/irqs.h>
  ARM: u300: delete <mach/hardware.h>
  ARM: u300: push down syscon registers
  ARM: u300: remove deps from debug macro
  ARM: u300: move debugmacro to debug includes
  ARM: u300: delete all static board data
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

7 files changed, 217 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/ste-u300.txt b/Documentation/devicetree/bindings/arm/ste-u300.txt
new file mode 100644
index 00000000000..69b5ab0b5f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ste-u300.txt
@@ -0,0 +1,46 @@
+ST-Ericsson U300 Device Tree Bindings
+
+For various board the "board" node may contain specific properties
+that pertain to this particular board, such as board-specific GPIOs
+or board power regulator supplies.
+
+Required root node property:
+
+compatible="stericsson,u300";
+
+Required node: syscon
+This contains the system controller.
+- compatible: must be "stericsson,u300-syscon".
+- reg: the base address and size of the system controller.
+
+Boards with the U300 SoC include:
+
+S365 "Small Board U365":
+
+Required node: s365
+This contains the board-specific information.
+- compatible: must be "stericsson,s365".
+- vana15-supply: the regulator supplying the 1.5V to drive the
+  board.
+- syscon: a pointer to the syscon node so we can acccess the
+  syscon registers to set the board as self-powered.
+
+Example:
+
+/ {
+	model = "ST-Ericsson U300";
+	compatible = "stericsson,u300";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	s365 {
+		compatible = "stericsson,s365";
+		vana15-supply = <&ab3100_ldo_d_reg>;
+		syscon = <&syscon>;
+	};
+
+	syscon: syscon@c0011000 {
+		compatible = "stericsson,u300-syscon";
+		reg = <0xc0011000 0x1000>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt b/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
new file mode 100644
index 00000000000..7cafcb98ead
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
@@ -0,0 +1,80 @@
+Clock bindings for ST-Ericsson U300 System Controller Clocks
+
+Bindings for the gated system controller clocks:
+
+Required properties:
+- compatible: must be "stericsson,u300-syscon-clk"
+- #clock-cells: must be <0>
+- clock-type: specifies the type of clock:
+  0 = slow clock
+  1 = fast clock
+  2 = rest/remaining clock
+- clock-id: specifies the clock in the type range
+
+Optional properties:
+- clocks: parent clock(s)
+
+The available clocks per type are as follows:
+
+Type:  ID:   Clock:
+-------------------
+0      0     Slow peripheral bridge clock
+0      1     UART0 clock
+0      4     GPIO clock
+0      6     RTC clock
+0      7     Application timer clock
+0      8     Access timer clock
+
+1      0     Fast peripheral bridge clock
+1      1     I2C bus 0 clock
+1      2     I2C bus 1 clock
+1      5     MMC interface peripheral (silicon) clock
+1      6     SPI clock
+
+2      3     CPU clock
+2      4     DMA controller clock
+2      5     External Memory Interface (EMIF) clock
+2      6     NAND flask interface clock
+2      8     XGAM graphics engine clock
+2      9     Shared External Memory Interface (SEMI) clock
+2      10    AHB Subsystem Bridge clock
+2      12    Interrupt controller clock
+
+Example:
+
+gpio_clk: gpio_clk@13M {
+	#clock-cells = <0>;
+	compatible = "stericsson,u300-syscon-clk";
+	clock-type = <0>; /* Slow */
+	clock-id = <4>;
+	clocks = <&slow_clk>;
+};
+
+gpio: gpio@c0016000 {
+	compatible = "stericsson,gpio-coh901";
+	(...)
+	clocks = <&gpio_clk>;
+};
+
+
+Bindings for the MMC/SD card clock:
+
+Required properties:
+- compatible: must be "stericsson,u300-syscon-mclk"
+- #clock-cells: must be <0>
+
+Optional properties:
+- clocks: parent clock(s)
+
+mmc_mclk: mmc_mclk {
+	#clock-cells = <0>;
+	compatible = "stericsson,u300-syscon-mclk";
+	clocks = <&mmc_pclk>;
+};
+
+mmcsd: mmcsd@c0001000 {
+	compatible = "arm,pl18x", "arm,primecell";
+	clocks = <&mmc_pclk>, <&mmc_mclk>;
+	clock-names = "apb_pclk", "mclk";
+	(...)
+};
diff --git a/Documentation/devicetree/bindings/dma/ste-coh901318.txt b/Documentation/devicetree/bindings/dma/ste-coh901318.txt
new file mode 100644
index 00000000000..091ad057e9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ste-coh901318.txt
@@ -0,0 +1,32 @@
+ST-Ericsson COH 901 318 DMA Controller
+
+This is a DMA controller which has begun as a fork of the
+ARM PL08x PrimeCell VHDL code.
+
+Required properties:
+- compatible: should be "stericsson,coh901318"
+- reg: register locations and length
+- interrupts: the single DMA IRQ
+- #dma-cells: must be set to <1>, as the channels on the
+  COH 901 318 are simple and identified by a single number
+- dma-channels: the number of DMA channels handled
+
+Example:
+
+dmac: dma-controller@c00020000 {
+	compatible = "stericsson,coh901318";
+	reg = <0xc0020000 0x1000>;
+	interrupt-parent = <&vica>;
+	interrupts = <2>;
+	#dma-cells = <1>;
+	dma-channels = <40>;
+};
+
+Consumers example:
+
+uart0: serial@c0013000 {
+	compatible = "...";
+	(...)
+	dmas = <&dmac 17 &dmac 18>;
+	dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt b/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt
new file mode 100644
index 00000000000..fd665b44d76
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt
@@ -0,0 +1,7 @@
+ST-Ericsson COH 901 571/3 GPIO controller
+
+Required properties:
+- compatible: Compatible property value should be "stericsson,gpio-coh901"
+- reg: Physical base address of the controller and length of memory mapped
+  region.
+- interrupts: the 0...n interrupts assigned to the different GPIO ports/banks.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt b/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt
new file mode 100644
index 00000000000..bd81a482634
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt
@@ -0,0 +1,15 @@
+ST Microelectronics DDC I2C
+
+Required properties :
+- compatible : Must be "st,ddci2c"
+- reg: physical base address of the controller and length of memory mapped
+     region.
+- interrupts: interrupt number to the cpu.
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Examples :
+
diff --git a/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt b/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt
new file mode 100644
index 00000000000..9499bc8ee9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt
@@ -0,0 +1,18 @@
+ST-Ericsson U300 apptimer
+
+Required properties:
+
+- compatible : should be "stericsson,u300-apptimer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 4 interrupts; one for each subtimer. These
+  are, in order: OS (operating system), DD (device driver) both
+  adopted for EPOC/Symbian with two specific IRQs for these tasks,
+  then GP1 and GP2, which are general-purpose timers.
+
+Example:
+
+timer {
+	compatible = "stericsson,u300-apptimer";
+	reg = <0xc0014000 0x1000>;
+	interrupts = <24 25 26 27>;
+};
diff --git a/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt b/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt
new file mode 100644
index 00000000000..8ffb88e39e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt
@@ -0,0 +1,19 @@
+ST-Ericsson COH 901 327 Watchdog timer
+
+Required properties:
+- compatible: must be "stericsson,coh901327".
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: the interrupt used for the watchdog timeout warning.
+
+Optional properties:
+- timeout-sec: contains the watchdog timeout in seconds.
+
+Example:
+
+watchdog: watchdog@c0012000 {
+	compatible = "stericsson,coh901327";
+	reg = <0xc0012000 0x1000>;
+	interrupts = <3>;
+	timeout-sec = <60>;
+};