Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 341 insertions, 0 deletions

diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
new file mode 100644
index 00000000000..60f6c2c4d47
--- /dev/null
+++ b/Documentation/filesystems/sysfs.txt
@@ -0,0 +1,341 @@
+
+sysfs - _The_ filesystem for exporting kernel objects. 
+
+Patrick Mochel	<mochel@osdl.org>
+
+10 January 2003
+
+
+What it is:
+~~~~~~~~~~~
+
+sysfs is a ram-based filesystem initially based on ramfs. It provides
+a means to export kernel data structures, their attributes, and the 
+linkages between them to userspace. 
+
+sysfs is tied inherently to the kobject infrastructure. Please read
+Documentation/kobject.txt for more information concerning the kobject
+interface. 
+
+
+Using sysfs
+~~~~~~~~~~~
+
+sysfs is always compiled in. You can access it by doing:
+
+    mount -t sysfs sysfs /sys 
+
+
+Directory Creation
+~~~~~~~~~~~~~~~~~~
+
+For every kobject that is registered with the system, a directory is
+created for it in sysfs. That directory is created as a subdirectory
+of the kobject's parent, expressing internal object hierarchies to
+userspace. Top-level directories in sysfs represent the common
+ancestors of object hierarchies; i.e. the subsystems the objects
+belong to. 
+
+Sysfs internally stores the kobject that owns the directory in the
+->d_fsdata pointer of the directory's dentry. This allows sysfs to do
+reference counting directly on the kobject when the file is opened and
+closed. 
+
+
+Attributes
+~~~~~~~~~~
+
+Attributes can be exported for kobjects in the form of regular files in
+the filesystem. Sysfs forwards file I/O operations to methods defined
+for the attributes, providing a means to read and write kernel
+attributes.
+
+Attributes should be ASCII text files, preferably with only one value
+per file. It is noted that it may not be efficient to contain only
+value per file, so it is socially acceptable to express an array of
+values of the same type. 
+
+Mixing types, expressing multiple lines of data, and doing fancy
+formatting of data is heavily frowned upon. Doing these things may get
+you publically humiliated and your code rewritten without notice. 
+
+
+An attribute definition is simply:
+
+struct attribute {
+        char                    * name;
+        mode_t                  mode;
+};
+
+
+int sysfs_create_file(struct kobject * kobj, struct attribute * attr);
+void sysfs_remove_file(struct kobject * kobj, struct attribute * attr);
+
+
+A bare attribute contains no means to read or write the value of the
+attribute. Subsystems are encouraged to define their own attribute
+structure and wrapper functions for adding and removing attributes for
+a specific object type. 
+
+For example, the driver model defines struct device_attribute like:
+
+struct device_attribute {
+        struct attribute        attr;
+        ssize_t (*show)(struct device * dev, char * buf);
+        ssize_t (*store)(struct device * dev, const char * buf);
+};
+
+int device_create_file(struct device *, struct device_attribute *);
+void device_remove_file(struct device *, struct device_attribute *);
+
+It also defines this helper for defining device attributes: 
+
+#define DEVICE_ATTR(_name,_mode,_show,_store)      \
+struct device_attribute dev_attr_##_name = {            \
+        .attr = {.name  = __stringify(_name) , .mode   = _mode },      \
+        .show   = _show,                                \
+        .store  = _store,                               \
+};
+
+For example, declaring
+
+static DEVICE_ATTR(foo,0644,show_foo,store_foo);
+
+is equivalent to doing:
+
+static struct device_attribute dev_attr_foo = {
+       .attr	= {
+		.name = "foo",
+		.mode = 0644,
+	},
+	.show = show_foo,
+	.store = store_foo,
+};
+
+
+Subsystem-Specific Callbacks
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When a subsystem defines a new attribute type, it must implement a
+set of sysfs operations for forwarding read and write calls to the
+show and store methods of the attribute owners. 
+
+struct sysfs_ops {
+        ssize_t (*show)(struct kobject *, struct attribute *,char *);
+        ssize_t (*store)(struct kobject *,struct attribute *,const char *);
+};
+
+[ Subsystems should have already defined a struct kobj_type as a
+descriptor for this type, which is where the sysfs_ops pointer is
+stored. See the kobject documentation for more information. ]
+
+When a file is read or written, sysfs calls the appropriate method
+for the type. The method then translates the generic struct kobject
+and struct attribute pointers to the appropriate pointer types, and
+calls the associated methods. 
+
+
+To illustrate:
+
+#define to_dev_attr(_attr) container_of(_attr,struct device_attribute,attr)
+#define to_dev(d) container_of(d, struct device, kobj)
+
+static ssize_t
+dev_attr_show(struct kobject * kobj, struct attribute * attr, char * buf)
+{
+        struct device_attribute * dev_attr = to_dev_attr(attr);
+        struct device * dev = to_dev(kobj);
+        ssize_t ret = 0;
+
+        if (dev_attr->show)
+                ret = dev_attr->show(dev,buf);
+        return ret;
+}
+
+
+
+Reading/Writing Attribute Data
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To read or write attributes, show() or store() methods must be
+specified when declaring the attribute. The method types should be as
+simple as those defined for device attributes:
+
+        ssize_t (*show)(struct device * dev, char * buf);
+        ssize_t (*store)(struct device * dev, const char * buf);
+
+IOW, they should take only an object and a buffer as parameters. 
+
+
+sysfs allocates a buffer of size (PAGE_SIZE) and passes it to the
+method. Sysfs will call the method exactly once for each read or
+write. This forces the following behavior on the method
+implementations: 
+
+- On read(2), the show() method should fill the entire buffer. 
+  Recall that an attribute should only be exporting one value, or an
+  array of similar values, so this shouldn't be that expensive. 
+
+  This allows userspace to do partial reads and seeks arbitrarily over
+  the entire file at will. 
+
+- On write(2), sysfs expects the entire buffer to be passed during the
+  first write. Sysfs then passes the entire buffer to the store()
+  method. 
+  
+  When writing sysfs files, userspace processes should first read the
+  entire file, modify the values it wishes to change, then write the
+  entire buffer back. 
+
+  Attribute method implementations should operate on an identical
+  buffer when reading and writing values. 
+
+Other notes:
+
+- The buffer will always be PAGE_SIZE bytes in length. On i386, this
+  is 4096. 
+
+- show() methods should return the number of bytes printed into the
+  buffer. This is the return value of snprintf().
+
+- show() should always use snprintf(). 
+
+- store() should return the number of bytes used from the buffer. This
+  can be done using strlen().
+
+- show() or store() can always return errors. If a bad value comes
+  through, be sure to return an error.
+
+- The object passed to the methods will be pinned in memory via sysfs
+  referencing counting its embedded object. However, the physical 
+  entity (e.g. device) the object represents may not be present. Be 
+  sure to have a way to check this, if necessary. 
+
+
+A very simple (and naive) implementation of a device attribute is:
+
+static ssize_t show_name(struct device * dev, char * buf)
+{
+        return sprintf(buf,"%s\n",dev->name);
+}
+
+static ssize_t store_name(struct device * dev, const char * buf)
+{
+	sscanf(buf,"%20s",dev->name);
+	return strlen(buf);
+}
+
+static DEVICE_ATTR(name,S_IRUGO,show_name,store_name);
+
+
+(Note that the real implementation doesn't allow userspace to set the 
+name for a device.)
+
+
+Top Level Directory Layout
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The sysfs directory arrangement exposes the relationship of kernel
+data structures. 
+
+The top level sysfs diretory looks like:
+
+block/
+bus/
+class/
+devices/
+firmware/
+net/
+
+devices/ contains a filesystem representation of the device tree. It maps
+directly to the internal kernel device tree, which is a hierarchy of
+struct device. 
+
+bus/ contains flat directory layout of the various bus types in the
+kernel. Each bus's directory contains two subdirectories:
+
+	devices/
+	drivers/
+
+devices/ contains symlinks for each device discovered in the system
+that point to the device's directory under root/.
+
+drivers/ contains a directory for each device driver that is loaded
+for devices on that particular bus (this assumes that drivers do not
+span multiple bus types).
+
+
+More information can driver-model specific features can be found in
+Documentation/driver-model/. 
+
+
+TODO: Finish this section.
+
+
+Current Interfaces
+~~~~~~~~~~~~~~~~~~
+
+The following interface layers currently exist in sysfs:
+
+
+- devices (include/linux/device.h)
+----------------------------------
+Structure:
+
+struct device_attribute {
+        struct attribute        attr;
+        ssize_t (*show)(struct device * dev, char * buf);
+        ssize_t (*store)(struct device * dev, const char * buf);
+};
+
+Declaring:
+
+DEVICE_ATTR(_name,_str,_mode,_show,_store);
+
+Creation/Removal:
+
+int device_create_file(struct device *device, struct device_attribute * attr);
+void device_remove_file(struct device * dev, struct device_attribute * attr);
+
+
+- bus drivers (include/linux/device.h)
+--------------------------------------
+Structure:
+
+struct bus_attribute {
+        struct attribute        attr;
+        ssize_t (*show)(struct bus_type *, char * buf);
+        ssize_t (*store)(struct bus_type *, const char * buf);
+};
+
+Declaring:
+
+BUS_ATTR(_name,_mode,_show,_store)
+
+Creation/Removal:
+
+int bus_create_file(struct bus_type *, struct bus_attribute *);
+void bus_remove_file(struct bus_type *, struct bus_attribute *);
+
+
+- device drivers (include/linux/device.h)
+-----------------------------------------
+
+Structure:
+
+struct driver_attribute {
+        struct attribute        attr;
+        ssize_t (*show)(struct device_driver *, char * buf);
+        ssize_t (*store)(struct device_driver *, const char * buf);
+};
+
+Declaring:
+
+DRIVER_ATTR(_name,_mode,_show,_store)
+
+Creation/Removal:
+
+int driver_create_file(struct device_driver *, struct driver_attribute *);
+void driver_remove_file(struct device_driver *, struct driver_attribute *);
+
+