summaryrefslogtreecommitdiffstats
path: root/Documentation/i2c/i2c-stub
diff options
context:
space:
mode:
authorJean Delvare <khali@linux-fr.org>2006-08-13 23:46:44 +0200
committerGreg Kroah-Hartman <gregkh@suse.de>2006-09-26 15:38:51 -0700
commit7a8d29cec7a53cf1a29dc5055aa9d1fa0f95830f (patch)
treed7be7f4fe5909b34fb4ca1587bc6a981c7c0b67b /Documentation/i2c/i2c-stub
parent6c805d2ce9d910ea915d7dbe4aed0a91f138be07 (diff)
i2c-stub: Chip address as a module parameter
i2c-stub: Chip address as a module parameter Add a mandatory chip_addr parameter to i2c-stub. This parameter defines to which chip address the driver will respond, instead of reponding to all addresses as before. The idea is to prevent the users from loading i2c-stub at random and being then confused by the results of sensors-detect or other user-space tools. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'Documentation/i2c/i2c-stub')
-rw-r--r--Documentation/i2c/i2c-stub15
1 files changed, 13 insertions, 2 deletions
diff --git a/Documentation/i2c/i2c-stub b/Documentation/i2c/i2c-stub
index d6dcb138abf..9cc081e6976 100644
--- a/Documentation/i2c/i2c-stub
+++ b/Documentation/i2c/i2c-stub
@@ -6,9 +6,12 @@ This module is a very simple fake I2C/SMBus driver. It implements four
types of SMBus commands: write quick, (r/w) byte, (r/w) byte data, and
(r/w) word data.
+You need to provide a chip address as a module parameter when loading
+this driver, which will then only react to SMBus commands to this address.
+
No hardware is needed nor associated with this module. It will accept write
-quick commands to all addresses; it will respond to the other commands (also
-to all addresses) by reading from or writing to an array in memory. It will
+quick commands to one address; it will respond to the other commands (also
+to one address) by reading from or writing to an array in memory. It will
also spam the kernel logs for every command it handles.
A pointer register with auto-increment is implemented for all byte
@@ -21,6 +24,11 @@ The typical use-case is like this:
3. load the target sensors chip driver module
4. observe its behavior in the kernel log
+PARAMETERS:
+
+int chip_addr:
+ The SMBus address to emulate a chip at.
+
CAVEATS:
There are independent arrays for byte/data and word/data commands. Depending
@@ -33,6 +41,9 @@ If the hardware for your driver has banked registers (e.g. Winbond sensors
chips) this module will not work well - although it could be extended to
support that pretty easily.
+Only one chip address is supported - although this module could be
+extended to support more.
+
If you spam it hard enough, printk can be lossy. This module really wants
something like relayfs.