Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into avr32-arch

1 files changed, 25 insertions, 18 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 8511d3532c2..fa4e1239a8f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -44,6 +44,7 @@ parameter is applicable:
 	FB	The frame buffer device is enabled.
 	HW	Appropriate hardware is enabled.
 	IA-64	IA-64 architecture is enabled.
+	IMA     Integrity measurement architecture is enabled.
 	IOSCHED	More than one I/O scheduler is enabled.
 	IP_PNP	IP DHCP, BOOTP, or RARP is enabled.
 	ISAPNP	ISA PnP code is enabled.
@@ -114,7 +115,7 @@ In addition, the following text indicates that the option:
 Parameters denoted with BOOT are actually interpreted by the boot
 loader, and have no meaning to the kernel directly.
 Do not modify the syntax of boot loader parameters without extreme
-need or coordination with <Documentation/x86/i386/boot.txt>.
+need or coordination with <Documentation/x86/boot.txt>.
 
 There are also arch-specific kernel-parameters not documented here.
 See for example <Documentation/x86/x86_64/boot-options.txt>.
@@ -134,7 +135,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	acpi=		[HW,ACPI,X86-64,i386]
 			Advanced Configuration and Power Interface
-			Format: { force | off | ht | strict | noirq }
+			Format: { force | off | ht | strict | noirq | rsdt }
 			force -- enable ACPI if default was off
 			off -- disable ACPI if default was on
 			noirq -- do not use ACPI for IRQ routing
@@ -492,10 +493,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			Default: 64
 
 	hpet=		[X86-32,HPET] option to control HPET usage
-			Format: { enable (default) | disable | force }
+			Format: { enable (default) | disable | force |
+				verbose }
 			disable: disable HPET and use PIT instead
 			force: allow force enabled of undocumented chips (ICH4,
 			VIA, nVidia)
+			verbose: show contents of HPET registers during setup
 
 	com20020=	[HW,NET] ARCnet - COM20020 chipset
 			Format:
@@ -577,9 +580,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			a memory unit (amount[KMG]). See also
 			Documentation/kdump/kdump.txt for a example.
 
-	cs4232=		[HW,OSS]
-			Format: <io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>
-
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
 
@@ -732,10 +732,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Default value is 0.
 			Value can be changed at runtime via /selinux/enforce.
 
-	es1371=		[HW,OSS]
-			Format: <spdif>,[<nomix>,[<amplifier>]]
-			See also header of sound/oss/es1371.c.
-
 	ether=		[HW,NET] Ethernet cards parameters
 			This option is obsoleted by the "netdev=" option, which
 			has equivalent usage. See its documentation for details.
@@ -836,6 +832,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	hvc_iucv=	[S390] Number of z/VM IUCV hypervisor console (HVC)
 			       terminal devices. Valid values: 0..8
+	hvc_iucv_allow=	[S390] Comma-separated list of z/VM user IDs.
+			       If specified, z/VM IUCV HVC accepts connections
+			       from listed z/VM user IDs only.
 
 	i8042.debug	[HW] Toggle i8042 debug mode
 	i8042.direct	[HW] Put keyboard port into non-translated mode
@@ -875,8 +874,10 @@ and is between 256 and 4096 characters. It is defined in the file
 	icn=		[HW,ISDN]
 			Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
 
-	ide=		[HW] (E)IDE subsystem
-			Format: ide=nodma or ide=doubler
+	ide-core.nodma=	[HW] (E)IDE subsystem
+			Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
+			.vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom
+			.chs .ignore_cable are additional options
 			See Documentation/ide/ide.txt.
 
 	idebus=		[HW] (E)IDE subsystem - VLB/PCI bus speed
@@ -907,6 +908,15 @@ and is between 256 and 4096 characters. It is defined in the file
 	ihash_entries=	[KNL]
 			Set number of hash buckets for inode cache.
 
+	ima_audit=	[IMA]
+			Format: { "0" | "1" }
+			0 -- integrity auditing messages. (Default)
+			1 -- enable informational integrity auditing messages.
+
+	ima_hash=	[IMA]
+			Formt: { "sha1" | "md5" }
+			default: "sha1"
+
 	in2000=		[HW,SCSI]
 			See header of drivers/scsi/in2000.c.
 
@@ -944,6 +954,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 
 	intel_iommu=	[DMAR] Intel IOMMU driver (DMAR) option
+		on
+			Enable intel iommu driver.
 		off
 			Disable intel iommu driver.
 		igfx_off [Default Off]
@@ -1819,11 +1831,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			autoconfiguration.
 			Ranges are in pairs (memory base and size).
 
-	dynamic_printk	Enables pr_debug()/dev_dbg() calls if
-			CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled.
-			These can also be switched on/off via
-			<debugfs>/dynamic_printk/modules
-
 	print-fatal-signals=
 			[KNL] debug: print fatal signals
 			print-fatal-signals=1: print segfault info to
@@ -2454,7 +2461,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See Documentation/fb/modedb.txt.
 
 	vga=		[BOOT,X86-32] Select a particular video mode
-			See Documentation/x86/i386/boot.txt and
+			See Documentation/x86/boot.txt and
 			Documentation/svga.txt.
 			Use vga=ask for menu.
 			This is actually a boot loader parameter; the value is