Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:
 "Noteworthy changes this time around:

   1) Multicast rejoin support for team driver, from Jiri Pirko.

   2) Centralize and simplify TCP RTT measurement handling in order to
      reduce the impact of bad RTO seeding from SYN/ACKs.  Also, when
      both timestamps and local RTT measurements are available prefer
      the later because there are broken middleware devices which
      scramble the timestamp.

      From Yuchung Cheng.

   3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel
      memory consumed to queue up unsend user data.  From Eric Dumazet.

   4) Add a "physical port ID" abstraction for network devices, from
      Jiri Pirko.

   5) Add a "suppress" operation to influence fib_rules lookups, from
      Stefan Tomanek.

   6) Add a networking development FAQ, from Paul Gortmaker.

   7) Extend the information provided by tcp_probe and add ipv6 support,
      from Daniel Borkmann.

   8) Use RCU locking more extensively in openvswitch data paths, from
      Pravin B Shelar.

   9) Add SCTP support to openvswitch, from Joe Stringer.

  10) Add EF10 chip support to SFC driver, from Ben Hutchings.

  11) Add new SYNPROXY netfilter target, from Patrick McHardy.

  12) Compute a rate approximation for sending in TCP sockets, and use
      this to more intelligently coalesce TSO frames.  Furthermore, add
      a new packet scheduler which takes advantage of this estimate when
      available.  From Eric Dumazet.

  13) Allow AF_PACKET fanouts with random selection, from Daniel
      Borkmann.

  14) Add ipv6 support to vxlan driver, from Cong Wang"

Resolved conflicts as per discussion.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits)
  openvswitch: Fix alignment of struct sw_flow_key.
  netfilter: Fix build errors with xt_socket.c
  tcp: Add missing braces to do_tcp_setsockopt
  caif: Add missing braces to multiline if in cfctrl_linkup_request
  bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize
  vxlan: Fix kernel panic on device delete.
  net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls
  net: mvneta: properly disable HW PHY polling and ensure adjust_link() works
  icplus: Use netif_running to determine device state
  ethernet/arc/arc_emac: Fix huge delays in large file copies
  tuntap: orphan frags before trying to set tx timestamp
  tuntap: purge socket error queue on detach
  qlcnic: use standard NAPI weights
  ipv6:introduce function to find route for redirect
  bnx2x: VF RSS support - VF side
  bnx2x: VF RSS support - PF side
  vxlan: Notify drivers for listening UDP port changes
  net: usbnet: update addr_assign_type if appropriate
  driver/net: enic: update enic maintainers and driver
  driver/net: enic: Exposing symbols for Cisco's low latency driver
  ...

1 files changed, 61 insertions, 6 deletions

diff --git a/Documentation/networking/igb.txt b/Documentation/networking/igb.txt
index 9a2a037194a..4ebbd659256 100644
--- a/Documentation/networking/igb.txt
+++ b/Documentation/networking/igb.txt
@@ -1,8 +1,8 @@
-Linux* Base Driver for Intel(R) Network Connection
-==================================================
+Linux* Base Driver for Intel(R) Ethernet Network Connection
+===========================================================
 
 Intel Gigabit Linux driver.
-Copyright(c) 1999 - 2010 Intel Corporation.
+Copyright(c) 1999 - 2013 Intel Corporation.
 
 Contents
 ========
@@ -36,6 +36,53 @@ Default Value: 0
 This parameter adds support for SR-IOV.  It causes the driver to spawn up to
 max_vfs worth of virtual function.
 
+QueuePairs
+----------
+Valid Range:  0-1
+Default Value:  1 (TX and RX will be paired onto one interrupt vector)
+
+If set to 0, when MSI-X is enabled, the TX and RX will attempt to occupy
+separate vectors.
+
+This option can be overridden to 1 if there are not sufficient interrupts
+available.  This can occur if any combination of RSS, VMDQ, and max_vfs
+results in more than 4 queues being used.
+
+Node
+----
+Valid Range:   0-n
+Default Value: -1 (off)
+
+  0 - n: where n is the number of the NUMA node that should be used to
+         allocate memory for this adapter port.
+  -1: uses the driver default of allocating memory on whichever processor is
+      running insmod/modprobe.
+
+  The Node parameter will allow you to pick which NUMA node you want to have
+  the adapter allocate memory from.  All driver structures, in-memory queues,
+  and receive buffers will be allocated on the node specified.  This parameter
+  is only useful when interrupt affinity is specified, otherwise some portion
+  of the time the interrupt could run on a different core than the memory is
+  allocated on, causing slower memory access and impacting throughput, CPU, or
+  both.
+
+EEE
+---
+Valid Range:  0-1
+Default Value: 1 (enabled)
+
+  A link between two EEE-compliant devices will result in periodic bursts of
+  data followed by long periods where in the link is in an idle state. This Low
+  Power Idle (LPI) state is supported in both 1Gbps and 100Mbps link speeds.
+  NOTE: EEE support requires autonegotiation.
+
+DMAC
+----
+Valid Range: 0-1
+Default Value: 1 (enabled)
+  Enables or disables DMA Coalescing feature.
+
+
 
 Additional Configurations
 =========================
@@ -55,10 +102,10 @@ Additional Configurations
   - The maximum MTU setting for Jumbo Frames is 9216.  This value coincides
     with the maximum Jumbo Frames size of 9234 bytes.
 
-  - Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or
-    loss of link.
+  - Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
+    poor performance or loss of link.
 
-  Ethtool
+  ethtool
   -------
   The driver utilizes the ethtool interface for driver configuration and
   diagnostics, as well as displaying statistical information. The latest
@@ -106,6 +153,14 @@ Additional Configurations
 
   Where n=the VF that attempted to do the spoofing.
 
+  Setting MAC Address, VLAN and Rate Limit Using IProute2 Tool
+  ------------------------------------------------------------
+  You can set a MAC address of a Virtual Function (VF), a default VLAN and the
+  rate limit using the IProute2 tool. Download the latest version of the
+  iproute2 tool from Sourceforge if your version does not have all the
+  features you require.
+
+
 Support
 =======