Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:

 1) GRE now works over ipv6, from Dmitry Kozlov.

 2) Make SCTP more network namespace aware, from Eric Biederman.

 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko.

 4) Make openvswitch network namespace aware, from Pravin B Shelar.

 5) IPV6 NAT implementation, from Patrick McHardy.

 6) Server side support for TCP Fast Open, from Jerry Chu and others.

 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel
    Borkmann.

 8) Increate the loopback default MTU to 64K, from Eric Dumazet.

 9) Use a per-task rather than per-socket page fragment allocator for
    outgoing networking traffic.  This benefits processes that have very
    many mostly idle sockets, which is quite common.

    From Eric Dumazet.

10) Use up to 32K for page fragment allocations, with fallbacks to
    smaller sizes when higher order page allocations fail.  Benefits are
    a) less segments for driver to process b) less calls to page
    allocator c) less waste of space.

    From Eric Dumazet.

11) Allow GRO to be used on GRE tunnels, from Eric Dumazet.

12) VXLAN device driver, one way to handle VLAN issues such as the
    limitation of 4096 VLAN IDs yet still have some level of isolation.
    From Stephen Hemminger.

13) As usual there is a large boatload of driver changes, with the scale
    perhaps tilted towards the wireless side this time around.

Fix up various fairly trivial conflicts, mostly caused by the user
namespace changes.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits)
  hyperv: Add buffer for extended info after the RNDIS response message.
  hyperv: Report actual status in receive completion packet
  hyperv: Remove extra allocated space for recv_pkt_list elements
  hyperv: Fix page buffer handling in rndis_filter_send_request()
  hyperv: Fix the missing return value in rndis_filter_set_packet_filter()
  hyperv: Fix the max_xfer_size in RNDIS initialization
  vxlan: put UDP socket in correct namespace
  vxlan: Depend on CONFIG_INET
  sfc: Fix the reported priorities of different filter types
  sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP
  sfc: Fix loopback self-test with separate_tx_channels=1
  sfc: Fix MCDI structure field lookup
  sfc: Add parentheses around use of bitfield macro arguments
  sfc: Fix null function pointer in efx_sriov_channel_type
  vxlan: virtual extensible lan
  igmp: export symbol ip_mc_leave_group
  netlink: add attributes to fdb interface
  tg3: unconditionally select HWMON support when tg3 is enabled.
  Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT"
  gre: fix sparse warning
  ...

1 files changed, 47 insertions, 0 deletions

diff --git a/Documentation/networking/vxlan.txt b/Documentation/networking/vxlan.txt
new file mode 100644
index 00000000000..5b34b762d7d
--- /dev/null
+++ b/Documentation/networking/vxlan.txt
@@ -0,0 +1,47 @@
+Virtual eXtensible Local Area Networking documentation
+======================================================
+
+The VXLAN protocol is a tunnelling protocol that is designed to
+solve the problem of limited number of available VLAN's (4096).
+With VXLAN identifier is expanded to 24 bits.
+
+It is a draft RFC standard, that is implemented by Cisco Nexus,
+Vmware and Brocade. The protocol runs over UDP using a single
+destination port (still not standardized by IANA).
+This document describes the Linux kernel tunnel device,
+there is also an implantation of VXLAN for Openvswitch.
+
+Unlike most tunnels, a VXLAN is a 1 to N network, not just point
+to point. A VXLAN device can either dynamically learn the IP address
+of the other end, in a manner similar to a learning bridge, or the
+forwarding entries can be configured statically.
+
+The management of vxlan is done in a similar fashion to it's
+too closest neighbors GRE and VLAN. Configuring VXLAN requires
+the version of iproute2 that matches the kernel release
+where VXLAN was first merged upstream.
+
+1. Create vxlan device
+  # ip li add vxlan0 type vxlan id 42 group 239.1.1.1 dev eth1
+
+This creates a new device (vxlan0). The device uses the
+the multicast group 239.1.1.1 over eth1 to handle packets where
+no entry is in the forwarding table.
+
+2. Delete vxlan device
+  # ip link delete vxlan0
+
+3. Show vxlan info
+  # ip -d show vxlan0
+
+It is possible to create, destroy and display the vxlan
+forwarding table using the new bridge command.
+
+1. Create forwarding table entry
+  # bridge fdb add to 00:17:42:8a:b4:05 dst 192.19.0.2 dev vxlan0
+
+2. Delete forwarding table entry
+  # bridge fdb delete 00:17:42:8a:b4:05
+
+3. Show forwarding table
+  # bridge fdb show dev vxlan0