summaryrefslogtreecommitdiffstats
path: root/Documentation/networking
diff options
context:
space:
mode:
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>2010-12-09 23:42:00 -0800
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2010-12-10 22:12:04 -0800
commit96c3c0330dea8856f02fc59e25c866d6d5eebed5 (patch)
treed80e53333de201e2131fedf22e6b9af4b55f094d /Documentation/networking
parenta5d62a149bb8f5359aff7ed7dce339752fbabfd9 (diff)
Documentation/networking/e1000.txt: Update documentation
Update Intel Wired LAN e1000 documentation. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'Documentation/networking')
-rw-r--r--Documentation/networking/e1000.txt10
1 files changed, 5 insertions, 5 deletions
diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt
index d9271e74e48..6cb13e9e134 100644
--- a/Documentation/networking/e1000.txt
+++ b/Documentation/networking/e1000.txt
@@ -79,7 +79,7 @@ InterruptThrottleRate
---------------------
(not supported on Intel(R) 82542, 82543 or 82544-based adapters)
Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
- 4=simplified balancing)
+ 4=simplified balancing)
Default Value: 3
The driver can limit the amount of interrupts per second that the adapter
@@ -124,8 +124,8 @@ InterruptThrottleRate is set to mode 1. In this mode, which operates
the same as mode 3, the InterruptThrottleRate will be increased stepwise to
70000 for traffic in class "Lowest latency".
-In simplified mode the interrupt rate is based on the ratio of Tx and
-Rx traffic. If the bytes per second rate is approximately equal, the
+In simplified mode the interrupt rate is based on the ratio of TX and
+RX traffic. If the bytes per second rate is approximately equal, the
interrupt rate will drop as low as 2000 interrupts per second. If the
traffic is mostly transmit or mostly receive, the interrupt rate could
be as high as 8000.
@@ -245,7 +245,7 @@ NOTE: Depending on the available system resources, the request for a
TxDescriptorStep
----------------
Valid Range: 1 (use every Tx Descriptor)
- 4 (use every 4th Tx Descriptor)
+ 4 (use every 4th Tx Descriptor)
Default Value: 1 (use every Tx Descriptor)
@@ -312,7 +312,7 @@ Valid Range: 0-xxxxxxx (0=off)
Default Value: 256
Usage: insmod e1000.ko copybreak=128
-Driver copies all packets below or equaling this size to a fresh Rx
+Driver copies all packets below or equaling this size to a fresh RX
buffer before handing it up the stack.
This parameter is different than other parameters, in that it is a