Merge commit 'linus/master' into HEAD

Conflicts:
	MAINTAINERS

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>

5 files changed, 9 insertions, 33 deletions

diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 421e7d00ffd..c9abbd86bc1 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -75,9 +75,6 @@ may need to apply in domain-specific ways to their devices:
 struct bus_type {
 	...
 	int  (*suspend)(struct device *dev, pm_message_t state);
-	int  (*suspend_late)(struct device *dev, pm_message_t state);
-
-	int  (*resume_early)(struct device *dev);
 	int  (*resume)(struct device *dev);
 };
 
@@ -226,20 +223,7 @@ The phases are seen by driver notifications issued in this order:
 
 	This call should handle parts of device suspend logic that require
 	sleeping.  It probably does work to quiesce the device which hasn't
-	been abstracted into class.suspend() or bus.suspend_late().
-
-   3	bus.suspend_late(dev, message) is called with IRQs disabled, and
-	with only one CPU active.  Until the bus.resume_early() phase
-	completes (see later), IRQs are not enabled again.  This method
-	won't be exposed by all busses; for message based busses like USB,
-	I2C, or SPI, device interactions normally require IRQs.  This bus
-	call may be morphed into a driver call with bus-specific parameters.
-
-	This call might save low level hardware state that might otherwise
-	be lost in the upcoming low power state, and actually put the
-	device into a low power state ... so that in some cases the device
-	may stay partly usable until this late.  This "late" call may also
-	help when coping with hardware that behaves badly.
+	been abstracted into class.suspend().
 
 The pm_message_t parameter is currently used to refine those semantics
 (described later).
@@ -351,19 +335,11 @@ devices processing each phase's calls before the next phase begins.
 
 The phases are seen by driver notifications issued in this order:
 
-   1	bus.resume_early(dev) is called with IRQs disabled, and with
-   	only one CPU active.  As with bus.suspend_late(), this method
-	won't be supported on busses that require IRQs in order to
-	interact with devices.
-
-	This reverses the effects of bus.suspend_late().
-
-   2	bus.resume(dev) is called next.  This may be morphed into a device
-   	driver call with bus-specific parameters; implementations may sleep.
-
-	This reverses the effects of bus.suspend().
+   1	bus.resume(dev) reverses the effects of bus.suspend().  This may
+	be morphed into a device driver call with bus-specific parameters;
+	implementations may sleep.
 
-   3	class.resume(dev) is called for devices associated with a class
+   2	class.resume(dev) is called for devices associated with a class
 	that has such a method.  Implementations may sleep.
 
 	This reverses the effects of class.suspend(), and would usually
diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt
index 82b7a43aadb..5f83fd24ea8 100644
--- a/Documentation/power/regulator/consumer.txt
+++ b/Documentation/power/regulator/consumer.txt
@@ -178,5 +178,5 @@ Consumers can uregister interest by calling :-
 int regulator_unregister_notifier(struct regulator *regulator,
 				struct notifier_block *nb);
 
-Regulators use the kernel notifier framework to send event to thier interested
+Regulators use the kernel notifier framework to send event to their interested
 consumers.
diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt
index bdcb332bd7f..0cded696ca0 100644
--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -119,7 +119,7 @@ Some terms used in this document:-
                    battery power, USB power)
 
                    Regulator Domains: is the new current limit within the
-                   regulator operating parameters for input/ouput voltage.
+                   regulator operating parameters for input/output voltage.
 
                    If the regulator request passes all the constraint tests
                    then the new regulator value is applied.
diff --git a/Documentation/power/s2ram.txt b/Documentation/power/s2ram.txt
index 2ebdc6091ce..514b94fc931 100644
--- a/Documentation/power/s2ram.txt
+++ b/Documentation/power/s2ram.txt
@@ -63,7 +63,7 @@ hardware during resume operations where a value can be set that will
 survive a reboot.
 
 Consequence is that after a resume (even if it is successful) your system
-clock will have a value corresponding to the magic mumber instead of the
+clock will have a value corresponding to the magic number instead of the
 correct date/time! It is therefore advisable to use a program like ntp-date
 or rdate to reset the correct date/time from an external time source when
 using this trace option.
diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt
index 7b99636564c..b967cd9137d 100644
--- a/Documentation/power/userland-swsusp.txt
+++ b/Documentation/power/userland-swsusp.txt
@@ -109,7 +109,7 @@ unfreeze user space processes frozen by SNAPSHOT_UNFREEZE if they are
 still frozen when the device is being closed).
 
 Currently it is assumed that the userland utilities reading/writing the
-snapshot image from/to the kernel will use a swap parition, called the resume
+snapshot image from/to the kernel will use a swap partition, called the resume
 partition, or a swap file as storage space (if a swap file is used, the resume
 partition is the partition that holds this file).  However, this is not really
 required, as they can use, for example, a special (blank) suspend partition or