Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 122 insertions, 0 deletions

diff --git a/Documentation/scsi/ChangeLog.ips b/Documentation/scsi/ChangeLog.ips
new file mode 100644
index 00000000000..5019f5182bf
--- /dev/null
+++ b/Documentation/scsi/ChangeLog.ips
@@ -0,0 +1,122 @@
+IBM ServeRAID driver Change Log
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+        5.00.01  - Sarasota ( 5i ) adapters must always be scanned first  
+                 - Get rid on IOCTL_NEW_COMMAND code  
+                 - Add Extended DCDB Commands for Tape Support in 5I                  
+        
+        4.90.11  - Don't actually RESET unless it's physically required
+                 - Remove unused compile options
+        
+        4.90.08  - Data Corruption if First Scatter Gather Element is > 64K
+        
+        4.90.08  - Increase Delays in Flashing ( Trombone Only - 4H )        
+        
+        4.90.05  - Use New PCI Architecture to facilitate Hot Plug Development
+        
+        4.90.01  - Add ServeRAID Version Checking
+
+        4.80.26  - Clean up potential code problems ( Arjan's recommendations )
+        
+        4.80.21  - Change memcpy() to copy_to_user() in NVRAM Page 5 IOCTL path   
+        
+        4.80.20  - Set max_sectors in Scsi_Host structure ( if >= 2.4.7 kernel )
+                 - 5 second delay needed after resetting an i960 adapter
+        
+        4.80.14  - Take all semaphores off stack                    
+                 - Clean Up New_IOCTL path
+                   
+        4.80.04  - Eliminate calls to strtok() if 2.4.x or greater 
+                 - Adjustments to Device Queue Depth               
+
+        4.80.00  - Make ia64 Safe    
+        
+        4.72.01  - I/O Mapped Memory release ( so "insmod ips" does not Fail )    
+                 - Don't Issue Internal FFDC Command if there are Active Commands 
+                 - Close Window for getting too many IOCTL's active 
+                   
+        4.72.00  - Allow for a Scatter-Gather Element to exceed MAX_XFER Size     
+        
+        4.71.00  - Change all memory allocations to not use GFP_DMA flag 
+                 - Code Clean-Up for 2.4.x kernel      
+        
+        4.70.15  - Fix Breakup for very large ( non-SG ) requests
+        
+        4.70.13  - Don't release HA Lock in ips_next() until SC taken off queue  
+                 - Unregister SCSI device in ips_release()                        
+                 - Don't Send CDB's if we already know the device is not present  
+                 
+        4.70.12  - Corrective actions for bad controller ( during initialization )
+        
+        4.70.09  - Use a Common ( Large Buffer ) for Flashing from the JCRM CD    
+                 - Add IPSSEND Flash Support                                      
+                 - Set Sense Data for Unknown SCSI Command                        
+                 - Use Slot Number from NVRAM Page 5 
+                 - Restore caller's DCDB Structure
+                                       
+        4.20.14  - Update patch files for kernel 2.4.0-test5
+
+        4.20.13  - Fix some failure cases / reset code
+                 - Hook into the reboot_notifier to flush the controller
+                   cache
+
+        4.20.03 - Rename version to coincide with new release schedules
+                - Performance fixes
+                - Fix truncation of /proc files with cat
+                - Merge in changes through kernel 2.4.0test1ac21
+
+        4.10.13 - Fix for dynamic unload and proc file system
+
+        4.10.00 - Add support for ServeRAID 4M/4L
+
+        4.00.06 - Fix timeout with initial FFDC command
+
+        4.00.05 - Remove wish_block from init routine
+                - Use linux/spinlock.h instead of asm/spinlock.h for kernels
+                  2.3.18 and later
+                - Sync with other changes from the 2.3 kernels
+
+        4.00.04 - Rename structures/constants to be prefixed with IPS_
+
+        4.00.03 - Add alternative passthru interface
+                - Add ability to flash ServeRAID BIOS
+
+        4.00.02 - Fix problem with PT DCDB with no buffer
+
+        4.00.01 - Add support for First Failure Data Capture
+
+        4.00.00 - Add support for ServeRAID 4
+
+        3.60.02 - Make DCDB direction based on lookup table.
+                - Only allow one DCDB command to a SCSI ID at a time.
+
+        3.60.01 - Remove bogus error check in passthru routine.
+
+        3.60.00 - Bump max commands to 128 for use with ServeRAID
+                  firmware 3.60.
+                - Change version to 3.60 to coincide with ServeRAID release
+                  numbering.
+
+        1.00.00 - Initial Public Release
+                - Functionally equivalent to 0.99.05
+
+        0.99.05 - Fix an oops on certain passthru commands
+
+        0.99.04 - Fix race condition in the passthru mechanism
+                  -- this required the interface to the utilities to change
+                - Fix error recovery code
+
+        0.99.03 - Make interrupt routine handle all completed request on the
+                  adapter not just the first one
+                - Make sure passthru commands get woken up if we run out of
+                  SCBs
+                - Send all of the commands on the queue at once rather than
+                  one at a time since the card will support it.
+
+        0.99.02 - Added some additional debug statements to print out
+                  errors if an error occurs while trying to read/write
+                  to a logical drive (IPS_DEBUG).
+
+                - Fixed read/write errors when the adapter is using an
+                  8K stripe size.
+