Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
	arch/sparc/Kconfig

3 files changed, 118 insertions, 9 deletions

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 4252697a95d..1c8eb4518ce 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -60,6 +60,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     slots	- Reserve the slot index for the given driver.
 		  This option takes multiple strings.		
 		  See "Module Autoloading Support" section for details.
+    debug	- Specifies the debug message level
+		  (0 = disable debug prints, 1 = normal debug messages,
+		   2 = verbose debug messages)
+		  This option appears only when CONFIG_SND_DEBUG=y.
+		  This option can be dynamically changed via sysfs
+		  /sys/modules/snd/parameters/debug file.
   
   Module snd-pcm-oss
   ------------------
@@ -513,6 +519,26 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     or input, but you may use this module for any application which
     requires a sound card (like RealPlayer).
 
+    pcm_devs       - Number of PCM devices assigned to each card
+                     (default = 1, up to 4)
+    pcm_substreams - Number of PCM substreams assigned to each PCM
+                     (default = 8, up to 16)
+    hrtimer        - Use hrtimer (=1, default) or system timer (=0)
+    fake_buffer    - Fake buffer allocations (default = 1)
+
+    When multiple PCM devices are created, snd-dummy gives different
+    behavior to each PCM device:
+      0 = interleaved with mmap support
+      1 = non-interleaved with mmap support
+      2 = interleaved without mmap 
+      3 = non-interleaved without mmap
+
+    As default, snd-dummy drivers doesn't allocate the real buffers
+    but either ignores read/write or mmap a single dummy page to all
+    buffer pages, in order to save the resouces.  If your apps need
+    the read/ written buffer data to be consistent, pass fake_buffer=0
+    option.
+
     The power-management is supported.
 
   Module snd-echo3g
@@ -768,6 +794,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     bdl_pos_adj	- Specifies the DMA IRQ timing delay in samples.
 		Passing -1 will make the driver to choose the appropriate
 		value based on the controller chip.
+    patch	- Specifies the early "patch" files to modify the HD-audio
+    		setup before initializing the codecs.  This option is
+		available only when CONFIG_SND_HDA_PATCH_LOADER=y is set.
+		See HD-Audio.txt for details.
     
     [Single (global) options]
     single_cmd  - Use single immediate commands to communicate with
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 939a3dd5814..97eebd63bed 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -114,8 +114,8 @@ ALC662/663/272
   samsung-nc10	Samsung NC10 mini notebook
   auto		auto-config reading BIOS (default)
 
-ALC882/885
-==========
+ALC882/883/885/888/889
+======================
   3stack-dig	3-jack with SPDIF I/O
   6stack-dig	6-jack digital with SPDIF I/O
   arima		Arima W820Di1
@@ -127,12 +127,8 @@ ALC882/885
   mbp3		Macbook Pro rev3
   imac24	iMac 24'' with jack detection
   w2jc		ASUS W2JC
-  auto		auto-config reading BIOS (default)
-
-ALC883/888
-==========
-  3stack-dig	3-jack with SPDIF I/O
-  6stack-dig	6-jack digital with SPDIF I/O
+  3stack-2ch-dig	3-jack with SPDIF I/O (ALC883)
+  alc883-6stack-dig	6-jack digital with SPDIF I/O (ALC883)
   3stack-6ch    3-jack 6-channel
   3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
   6stack-dig-demo  6-jack digital for Intel demo board
@@ -140,6 +136,7 @@ ALC883/888
   acer-aspire	Acer Aspire 9810
   acer-aspire-4930g Acer Aspire 4930G
   acer-aspire-6530g Acer Aspire 6530G
+  acer-aspire-7730g Acer Aspire 7730G
   acer-aspire-8930g Acer Aspire 8930G
   medion	Medion Laptops
   medion-md2	Medion MD2
@@ -155,10 +152,13 @@ ALC883/888
   3stack-hp	HP machines with 3stack (Lucknow, Samba boards)
   6stack-dell	Dell machines with 6stack (Inspiron 530)
   mitac		Mitac 8252D
+  clevo-m540r	Clevo M540R (6ch + digital)
   clevo-m720	Clevo M720 laptop series
   fujitsu-pi2515 Fujitsu AMILO Pi2515
   fujitsu-xa3530 Fujitsu AMILO XA3530
   3stack-6ch-intel Intel DG33* boards
+  intel-alc889a	Intel IbexPeak with ALC889A
+  intel-x58	Intel DX58 with ALC889
   asus-p5q	ASUS P5Q-EM boards
   mb31		MacBook 3,1
   sony-vaio-tt  Sony VAIO TT
@@ -229,7 +229,7 @@ AD1984
 ======
   basic		default configuration
   thinkpad	Lenovo Thinkpad T61/X61
-  dell		Dell T3400
+  dell_desktop	Dell T3400
 
 AD1986A
 =======
@@ -258,6 +258,7 @@ Conexant 5045
   laptop-micsense   Laptop with Mic sense (old model fujitsu)
   laptop-hpmicsense Laptop with HP and Mic senses
   benq		Benq R55E
+  laptop-hp530	HP 530 laptop
   test		for testing/debugging purpose, almost all controls
 		can be adjusted.  Appearing only when compiled with
 		$CONFIG_SND_DEBUG=y
@@ -278,9 +279,16 @@ Conexant 5051
   hp-dv6736	HP dv6736
   lenovo-x200	Lenovo X200 laptop
 
+Conexant 5066
+=============
+  laptop	Basic Laptop config (default)
+  dell-laptop	Dell laptops
+  olpc-xo-1_5	OLPC XO 1.5
+
 STAC9200
 ========
   ref		Reference board
+  oqo		OQO Model 2
   dell-d21	Dell (unknown)
   dell-d22	Dell (unknown)
   dell-d23	Dell (unknown)
@@ -368,10 +376,12 @@ STAC92HD73*
 ===========
   ref		Reference board
   no-jd		BIOS setup but without jack-detection
+  intel		Intel DG45* mobos
   dell-m6-amic	Dell desktops/laptops with analog mics
   dell-m6-dmic	Dell desktops/laptops with digital mics
   dell-m6	Dell desktops/laptops with both type of mics
   dell-eq	Dell desktops/laptops
+  alienware	Alienware M17x
   auto		BIOS setup (default)
 
 STAC92HD83*
@@ -385,3 +395,8 @@ STAC9872
 ========
   vaio		VAIO laptop without SPDIF
   auto		BIOS setup (default)
+
+Cirrus Logic CS4206/4207
+========================
+  mbp55		MacBook Pro 5,5
+  auto		BIOS setup (default)
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 71ac995b191..7b8a5f947d1 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -139,6 +139,10 @@ The driver checks PCI SSID and looks through the static configuration
 table until any matching entry is found.  If you have a new machine,
 you may see a message like below:
 ------------------------------------------------------------------------
+    hda_codec: ALC880: BIOS auto-probing.
+------------------------------------------------------------------------
+Meanwhile, in the earlier versions, you would see a message like:
+------------------------------------------------------------------------
     hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
 ------------------------------------------------------------------------
 Even if you see such a message, DON'T PANIC.  Take a deep breath and
@@ -403,6 +407,66 @@ re-configure based on that state, run like below:
 ------------------------------------------------------------------------
 
 
+Early Patching
+~~~~~~~~~~~~~~
+When CONFIG_SND_HDA_PATCH_LOADER=y is set, you can pass a "patch" as a
+firmware file for modifying the HD-audio setup before initializing the
+codec.  This can work basically like the reconfiguration via sysfs in
+the above, but it does it before the first codec configuration.
+
+A patch file is a plain text file which looks like below:
+
+------------------------------------------------------------------------
+  [codec]
+  0x12345678 0xabcd1234 2
+
+  [model]
+  auto
+
+  [pincfg]
+  0x12 0x411111f0
+
+  [verb]
+  0x20 0x500 0x03
+  0x20 0x400 0xff
+
+  [hint]
+  hp_detect = yes
+------------------------------------------------------------------------
+
+The file needs to have a line `[codec]`.  The next line should contain
+three numbers indicating the codec vendor-id (0x12345678 in the
+example), the codec subsystem-id (0xabcd1234) and the address (2) of
+the codec.  The rest patch entries are applied to this specified codec
+until another codec entry is given.
+
+The `[model]` line allows to change the model name of the each codec.
+In the example above, it will be changed to model=auto.
+Note that this overrides the module option.
+
+After the `[pincfg]` line, the contents are parsed as the initial
+default pin-configurations just like `user_pin_configs` sysfs above.
+The values can be shown in user_pin_configs sysfs file, too.
+
+Similarly, the lines after `[verb]` are parsed as `init_verbs`
+sysfs entries, and the lines after `[hint]` are parsed as `hints`
+sysfs entries, respectively.
+
+The hd-audio driver reads the file via request_firmware().  Thus,
+a patch file has to be located on the appropriate firmware path,
+typically, /lib/firmware.  For example, when you pass the option
+`patch=hda-init.fw`, the file /lib/firmware/hda-init-fw must be
+present.
+
+The patch module option is specific to each card instance, and you
+need to give one file name for each instance, separated by commas.
+For example, if you have two cards, one for an on-board analog and one 
+for an HDMI video board, you may pass patch option like below:
+------------------------------------------------------------------------
+    options snd-hda-intel patch=on-board-patch,hdmi-patch
+------------------------------------------------------------------------
+
+
 Power-Saving
 ~~~~~~~~~~~~
 The power-saving is a kind of auto-suspend of the device.  When the