Merge branch 'linus' into perfcounters/core

Conflicts:
	fs/exec.c
	include/linux/init_task.h

Simple context conflicts.

3 files changed, 13 insertions, 9 deletions

diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt
index 9b22bd14c34..eac7df94d8e 100644
--- a/Documentation/usb/gadget_serial.txt
+++ b/Documentation/usb/gadget_serial.txt
@@ -114,11 +114,11 @@ modules.
 Then you must load the gadget serial driver.  To load it as an
 ACM device (recommended for interoperability), do this:
 
-  modprobe g_serial use_acm=1
+  modprobe g_serial
 
 To load it as a vendor specific bulk in/out device, do this:
 
-  modprobe g_serial
+  modprobe g_serial use_acm=0
 
 This will also automatically load the underlying gadget peripheral
 controller driver.  This must be done each time you reboot the gadget
diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
index 077e9032d0c..fafcd472326 100644
--- a/Documentation/usb/proc_usb_info.txt
+++ b/Documentation/usb/proc_usb_info.txt
@@ -49,8 +49,10 @@ it and 002/048 sometime later.
 
 These files can be read as binary data.  The binary data consists
 of first the device descriptor, then the descriptors for each
-configuration of the device.  That information is also shown in
-text form by the /proc/bus/usb/devices file, described later.
+configuration of the device.  Multi-byte fields in the device and
+configuration descriptors, but not other descriptors, are converted
+to host endianness by the kernel.  This information is also shown
+in text form by the /proc/bus/usb/devices file, described later.
 
 These files may also be used to write user-level drivers for the USB
 devices.  You would open the /proc/bus/usb/BBB/DDD file read/write,
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 2917ce4ffdc..270481906dc 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -34,11 +34,12 @@ if usbmon is built into the kernel.
 Verify that bus sockets are present.
 
 # ls /sys/kernel/debug/usbmon
-0s  0t  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
+0s  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
 #
 
-Now you can choose to either use the sockets numbered '0' (to capture packets on
-all buses), and skip to step #3, or find the bus used by your device with step #2.
+Now you can choose to either use the socket '0u' (to capture packets on all
+buses), and skip to step #3, or find the bus used by your device with step #2.
+This allows to filter away annoying devices that talk continuously.
 
 2. Find which bus connects to the desired device
 
@@ -99,8 +100,9 @@ on the event type, but there is a set of words, common for all types.
 
 Here is the list of words, from left to right:
 
-- URB Tag. This is used to identify URBs is normally a kernel mode address
- of the URB structure in hexadecimal.
+- URB Tag. This is used to identify URBs, and is normally an in-kernel address
+  of the URB structure in hexadecimal, but can be a sequence number or any
+  other unique string, within reason.
 
 - Timestamp in microseconds, a decimal number. The timestamp's resolution
   depends on available clock, and so it can be much worse than a microsecond