Merge branch 'master' into for-next

Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.

15 files changed, 538 insertions, 60 deletions

diff --git a/Documentation/video4linux/README.ivtv b/Documentation/video4linux/README.ivtv
index 42b06686eb7..2579b5b709e 100644
--- a/Documentation/video4linux/README.ivtv
+++ b/Documentation/video4linux/README.ivtv
@@ -36,8 +36,7 @@ Additional features for the PVR-350 (CX23415 based):
  * Provides comprehensive OSD (On Screen Display: ie. graphics overlaying the
    video signal)
  * Provides a framebuffer (allowing X applications to appear on the video
-   device) (this framebuffer is not yet part of the kernel. In the meantime it
-   is available from www.ivtvdriver.org).
+   device)
  * Supports raw YUV output.
 
 IMPORTANT: In case of problems first read this page:
diff --git a/Documentation/video4linux/README.pvrusb2 b/Documentation/video4linux/README.pvrusb2
index a747200fe67..2137b589276 100644
--- a/Documentation/video4linux/README.pvrusb2
+++ b/Documentation/video4linux/README.pvrusb2
@@ -172,7 +172,7 @@ Source file list / functional overview:
     to provide a streaming API usable by a read() system call style of
     I/O.  Right now this is the only layer on top of pvrusb2-io.[ch],
     however the underlying architecture here was intended to allow for
-    other styles of I/O to be implemented with additonal modules, like
+    other styles of I/O to be implemented with additional modules, like
     mmap()'ed buffers or something even more exotic.
 
   pvrusb2-main.c - This is the top level of the driver.  Module level
diff --git a/Documentation/video4linux/Zoran b/Documentation/video4linux/Zoran
index 699b60e070d..c40e3bab08f 100644
--- a/Documentation/video4linux/Zoran
+++ b/Documentation/video4linux/Zoran
@@ -130,7 +130,7 @@ Card number: 4
 
 Note: No module for the mse3000 is available yet
 Note: No module for the vpx3224 is available yet
-Note: use encoder=X or decoder=X for non-default i2c chips (see i2c-id.h)
+Note: use encoder=X or decoder=X for non-default i2c chips
 
 ===========================
 
diff --git a/Documentation/video4linux/bttv/Insmod-options b/Documentation/video4linux/bttv/Insmod-options
index bbe3ed667d9..14c065fa23e 100644
--- a/Documentation/video4linux/bttv/Insmod-options
+++ b/Documentation/video4linux/bttv/Insmod-options
@@ -1,5 +1,5 @@
 
-Note: "modinfo <module>" prints various informations about a kernel
+Note: "modinfo <module>" prints various information about a kernel
 module, among them a complete and up-to-date list of insmod options.
 This list tends to be outdated because it is updated manually ...
 
diff --git a/Documentation/video4linux/bttv/README b/Documentation/video4linux/bttv/README
index 3a367cdb664..7cbf4fb6cf3 100644
--- a/Documentation/video4linux/bttv/README
+++ b/Documentation/video4linux/bttv/README
@@ -70,7 +70,7 @@ If you have trouble with some specific TV card, try to ask there
 instead of mailing me directly.  The chance that someone with the
 same card listens there is much higher...
 
-For problems with sound:  There are alot of different systems used
+For problems with sound:  There are a lot of different systems used
 for TV sound all over the world.  And there are also different chips
 which decode the audio signal.  Reports about sound problems ("stereo
 does'nt work") are pretty useless unless you include some details
diff --git a/Documentation/video4linux/bttv/README.freeze b/Documentation/video4linux/bttv/README.freeze
index 4259dccc828..5eddfa076cf 100644
--- a/Documentation/video4linux/bttv/README.freeze
+++ b/Documentation/video4linux/bttv/README.freeze
@@ -33,7 +33,7 @@ state is stuck.
 
 I've seen reports that bttv 0.7.x crashes whereas 0.8.x works rock solid
 for some people.  Thus probably a small buglet left somewhere in bttv
-0.7.x.  I have no idea where exactly, it works stable for me and alot of
+0.7.x.  I have no idea where exactly, it works stable for me and a lot of
 other people.  But in case you have problems with the 0.7.x versions you
 can give 0.8.x a try ...
 
diff --git a/Documentation/video4linux/bttv/Sound-FAQ b/Documentation/video4linux/bttv/Sound-FAQ
index 1e6328f9108..395f6c6fdd9 100644
--- a/Documentation/video4linux/bttv/Sound-FAQ
+++ b/Documentation/video4linux/bttv/Sound-FAQ
@@ -2,13 +2,13 @@
 bttv and sound mini howto
 =========================
 
-There are alot of different bt848/849/878/879 based boards available.
+There are a lot of different bt848/849/878/879 based boards available.
 Making video work often is not a big deal, because this is handled
 completely by the bt8xx chip, which is common on all boards.  But
 sound is handled in slightly different ways on each board.
 
 To handle the grabber boards correctly, there is a array tvcards[] in
-bttv-cards.c, which holds the informations required for each board.
+bttv-cards.c, which holds the information required for each board.
 Sound will work only, if the correct entry is used (for video it often
 makes no difference).  The bttv driver prints a line to the kernel
 log, telling which card type is used.  Like this one:
diff --git a/Documentation/video4linux/et61x251.txt b/Documentation/video4linux/et61x251.txt
index 1247566c4de..e0cdae49185 100644
--- a/Documentation/video4linux/et61x251.txt
+++ b/Documentation/video4linux/et61x251.txt
@@ -191,10 +191,10 @@ Syntax:         <n>
 Description:    Debugging information level, from 0 to 3:
 		0 = none (use carefully)
 		1 = critical errors
-		2 = significant informations
+		2 = significant information
 		3 = more verbose messages
 		Level 3 is useful for testing only, when only one device
-		is used at the same time. It also shows some more informations
+		is used at the same time. It also shows some more information
 		about the hardware being detected. This module parameter can be
 		changed at runtime thanks to the /sys filesystem interface.
 Default:        2
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 261776e0c5e..5c542e60f51 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -103,6 +103,7 @@ spca561		046d:092d	Logitech QC Elch2
 spca561		046d:092e	Logitech QC Elch2
 spca561		046d:092f	Logitech QuickCam Express Plus
 sunplus		046d:0960	Logitech ClickSmart 420
+nw80x		046d:d001	Logitech QuickCam Pro (dark focus ring)
 sunplus		0471:0322	Philips DMVC1300K
 zc3xx		0471:0325	Philips SPC 200 NC
 zc3xx		0471:0326	Philips SPC 300 NC
@@ -150,10 +151,12 @@ sunplus		04fc:5330	Digitrex 2110
 sunplus		04fc:5360	Sunplus Generic
 spca500		04fc:7333	PalmPixDC85
 sunplus		04fc:ffff	Pure DigitalDakota
+nw80x		0502:d001	DVC V6
 spca501		0506:00df	3Com HomeConnect Lite
 sunplus		052b:1507	Megapixel 5 Pretec DC-1007
 sunplus		052b:1513	Megapix V4
 sunplus		052b:1803	MegaImage VI
+nw80x		052b:d001	EZCam Pro p35u
 tv8532		0545:808b	Veo Stingray
 tv8532		0545:8333	Veo Stingray
 sunplus		0546:3155	Polaroid PDC3070
@@ -177,6 +180,7 @@ sunplus		055f:c530	Mustek Gsmart LCD 3
 sunplus		055f:c540	Gsmart D30
 sunplus		055f:c630	Mustek MDC4000
 sunplus		055f:c650	Mustek MDC5500Z
+nw80x		055f:d001	Mustek Wcam 300 mini
 zc3xx		055f:d003	Mustek WCam300A
 zc3xx		055f:d004	Mustek WCam300 AN
 conex		0572:0041	Creative Notebook cx11646
@@ -195,14 +199,20 @@ gl860		05e3:0503	Genesys Logic PC Camera
 gl860		05e3:f191	Genesys Logic PC Camera
 spca561		060b:a001	Maxell Compact Pc PM3
 zc3xx		0698:2003	CTX M730V built in
+nw80x		06a5:0000	Typhoon Webcam 100 USB
+nw80x		06a5:d001	Divio based webcams
+nw80x		06a5:d800	Divio Chicony TwinkleCam, Trust SpaceCam
 spca500		06bd:0404	Agfa CL20
 spca500		06be:0800	Optimedia
+nw80x		06be:d001	EZCam Pro p35u
 sunplus		06d6:0031	Trust 610 LCD PowerC@m Zoom
 spca506		06e1:a190	ADS Instant VCD
+ov534		06f8:3002	Hercules Blog Webcam
 ov534_9		06f8:3003	Hercules Dualpix HD Weblog
 sonixj		06f8:3004	Hercules Classic Silver
 sonixj		06f8:3008	Hercules Deluxe Optical Glass
 pac7302		06f8:3009	Hercules Classic Link
+nw80x		0728:d001	AVerMedia Camguard
 spca508		0733:0110	ViewQuest VQ110
 spca501		0733:0401	Intel Create and Share
 spca501		0733:0402	ViewQuest M318B
diff --git a/Documentation/video4linux/omap3isp.txt b/Documentation/video4linux/omap3isp.txt
new file mode 100644
index 00000000000..69be2c782b9
--- /dev/null
+++ b/Documentation/video4linux/omap3isp.txt
@@ -0,0 +1,278 @@
+OMAP 3 Image Signal Processor (ISP) driver
+
+Copyright (C) 2010 Nokia Corporation
+Copyright (C) 2009 Texas Instruments, Inc.
+
+Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+	  Sakari Ailus <sakari.ailus@iki.fi>
+	  David Cohen <dacohen@gmail.com>
+
+
+Introduction
+============
+
+This file documents the Texas Instruments OMAP 3 Image Signal Processor (ISP)
+driver located under drivers/media/video/omap3isp. The original driver was
+written by Texas Instruments but since that it has been rewritten (twice) at
+Nokia.
+
+The driver has been successfully used on the following versions of OMAP 3:
+
+	3430
+	3530
+	3630
+
+The driver implements V4L2, Media controller and v4l2_subdev interfaces.
+Sensor, lens and flash drivers using the v4l2_subdev interface in the kernel
+are supported.
+
+
+Split to subdevs
+================
+
+The OMAP 3 ISP is split into V4L2 subdevs, each of the blocks inside the ISP
+having one subdev to represent it. Each of the subdevs provide a V4L2 subdev
+interface to userspace.
+
+	OMAP3 ISP CCP2
+	OMAP3 ISP CSI2a
+	OMAP3 ISP CCDC
+	OMAP3 ISP preview
+	OMAP3 ISP resizer
+	OMAP3 ISP AEWB
+	OMAP3 ISP AF
+	OMAP3 ISP histogram
+
+Each possible link in the ISP is modelled by a link in the Media controller
+interface. For an example program see [2].
+
+
+Controlling the OMAP 3 ISP
+==========================
+
+In general, the settings given to the OMAP 3 ISP take effect at the beginning
+of the following frame. This is done when the module becomes idle during the
+vertical blanking period on the sensor. In memory-to-memory operation the pipe
+is run one frame at a time. Applying the settings is done between the frames.
+
+All the blocks in the ISP, excluding the CSI-2 and possibly the CCP2 receiver,
+insist on receiving complete frames. Sensors must thus never send the ISP
+partial frames.
+
+Autoidle does have issues with some ISP blocks on the 3430, at least.
+Autoidle is only enabled on 3630 when the omap3isp module parameter autoidle
+is non-zero.
+
+
+Events
+======
+
+The OMAP 3 ISP driver does support the V4L2 event interface on CCDC and
+statistics (AEWB, AF and histogram) subdevs.
+
+The CCDC subdev produces V4L2_EVENT_OMAP3ISP_HS_VS type event on HS_VS
+interrupt which is used to signal frame start. The event is triggered exactly
+when the reception of the first line of the frame starts in the CCDC module.
+The event can be subscribed on the CCDC subdev.
+
+(When using parallel interface one must pay account to correct configuration
+of the VS signal polarity. This is automatically correct when using the serial
+receivers.)
+
+Each of the statistics subdevs is able to produce events. An event is
+generated whenever a statistics buffer can be dequeued by a user space
+application using the VIDIOC_OMAP3ISP_STAT_REQ IOCTL. The events available
+are:
+
+	V4L2_EVENT_OMAP3ISP_AEWB
+	V4L2_EVENT_OMAP3ISP_AF
+	V4L2_EVENT_OMAP3ISP_HIST
+
+The type of the event data is struct omap3isp_stat_event_status for these
+ioctls. If there is an error calculating the statistics, there will be an
+event as usual, but no related statistics buffer. In this case
+omap3isp_stat_event_status.buf_err is set to non-zero.
+
+
+Private IOCTLs
+==============
+
+The OMAP 3 ISP driver supports standard V4L2 IOCTLs and controls where
+possible and practical. Much of the functions provided by the ISP, however,
+does not fall under the standard IOCTLs --- gamma tables and configuration of
+statistics collection are examples of such.
+
+In general, there is a private ioctl for configuring each of the blocks
+containing hardware-dependent functions.
+
+The following private IOCTLs are supported:
+
+	VIDIOC_OMAP3ISP_CCDC_CFG
+	VIDIOC_OMAP3ISP_PRV_CFG
+	VIDIOC_OMAP3ISP_AEWB_CFG
+	VIDIOC_OMAP3ISP_HIST_CFG
+	VIDIOC_OMAP3ISP_AF_CFG
+	VIDIOC_OMAP3ISP_STAT_REQ
+	VIDIOC_OMAP3ISP_STAT_EN
+
+The parameter structures used by these ioctls are described in
+include/linux/omap3isp.h. The detailed functions of the ISP itself related to
+a given ISP block is described in the Technical Reference Manuals (TRMs) ---
+see the end of the document for those.
+
+While it is possible to use the ISP driver without any use of these private
+IOCTLs it is not possible to obtain optimal image quality this way. The AEWB,
+AF and histogram modules cannot be used without configuring them using the
+appropriate private IOCTLs.
+
+
+CCDC and preview block IOCTLs
+=============================
+
+The VIDIOC_OMAP3ISP_CCDC_CFG and VIDIOC_OMAP3ISP_PRV_CFG IOCTLs are used to
+configure, enable and disable functions in the CCDC and preview blocks,
+respectively. Both IOCTLs control several functions in the blocks they
+control. VIDIOC_OMAP3ISP_CCDC_CFG IOCTL accepts a pointer to struct
+omap3isp_ccdc_update_config as its argument. Similarly VIDIOC_OMAP3ISP_PRV_CFG
+accepts a pointer to struct omap3isp_prev_update_config. The definition of
+both structures is available in [1].
+
+The update field in the structures tells whether to update the configuration
+for the specific function and the flag tells whether to enable or disable the
+function.
+
+The update and flag bit masks accept the following values. Each separate
+functions in the CCDC and preview blocks is associated with a flag (either
+disable or enable; part of the flag field in the structure) and a pointer to
+configuration data for the function.
+
+Valid values for the update and flag fields are listed here for
+VIDIOC_OMAP3ISP_CCDC_CFG. Values may be or'ed to configure more than one
+function in the same IOCTL call.
+
+        OMAP3ISP_CCDC_ALAW
+        OMAP3ISP_CCDC_LPF
+        OMAP3ISP_CCDC_BLCLAMP
+        OMAP3ISP_CCDC_BCOMP
+        OMAP3ISP_CCDC_FPC
+        OMAP3ISP_CCDC_CULL
+        OMAP3ISP_CCDC_CONFIG_LSC
+        OMAP3ISP_CCDC_TBL_LSC
+
+The corresponding values for the VIDIOC_OMAP3ISP_PRV_CFG are here:
+
+        OMAP3ISP_PREV_LUMAENH
+        OMAP3ISP_PREV_INVALAW
+        OMAP3ISP_PREV_HRZ_MED
+        OMAP3ISP_PREV_CFA
+        OMAP3ISP_PREV_CHROMA_SUPP
+        OMAP3ISP_PREV_WB
+        OMAP3ISP_PREV_BLKADJ
+        OMAP3ISP_PREV_RGB2RGB
+        OMAP3ISP_PREV_COLOR_CONV
+        OMAP3ISP_PREV_YC_LIMIT
+        OMAP3ISP_PREV_DEFECT_COR
+        OMAP3ISP_PREV_GAMMABYPASS
+        OMAP3ISP_PREV_DRK_FRM_CAPTURE
+        OMAP3ISP_PREV_DRK_FRM_SUBTRACT
+        OMAP3ISP_PREV_LENS_SHADING
+        OMAP3ISP_PREV_NF
+        OMAP3ISP_PREV_GAMMA
+
+The associated configuration pointer for the function may not be NULL when
+enabling the function. When disabling a function the configuration pointer is
+ignored.
+
+
+Statistic blocks IOCTLs
+=======================
+
+The statistics subdevs do offer more dynamic configuration options than the
+other subdevs. They can be enabled, disable and reconfigured when the pipeline
+is in streaming state.
+
+The statistics blocks always get the input image data from the CCDC (as the
+histogram memory read isn't implemented). The statistics are dequeueable by
+the user from the statistics subdev nodes using private IOCTLs.
+
+The private IOCTLs offered by the AEWB, AF and histogram subdevs are heavily
+reflected by the register level interface offered by the ISP hardware. There
+are aspects that are purely related to the driver implementation and these are
+discussed next.
+
+VIDIOC_OMAP3ISP_STAT_EN
+-----------------------
+
+This private IOCTL enables/disables a statistic module. If this request is
+done before streaming, it will take effect as soon as the pipeline starts to
+stream.  If the pipeline is already streaming, it will take effect as soon as
+the CCDC becomes idle.
+
+VIDIOC_OMAP3ISP_AEWB_CFG, VIDIOC_OMAP3ISP_HIST_CFG and VIDIOC_OMAP3ISP_AF_CFG
+-----------------------------------------------------------------------------
+
+Those IOCTLs are used to configure the modules. They require user applications
+to have an in-depth knowledge of the hardware. Most of the fields explanation
+can be found on OMAP's TRMs. The two following fields common to all the above
+configure private IOCTLs require explanation for better understanding as they
+are not part of the TRM.
+
+omap3isp_[h3a_af/h3a_aewb/hist]_config.buf_size:
+
+The modules handle their buffers internally. The necessary buffer size for the
+module's data output depends on the requested configuration. Although the
+driver supports reconfiguration while streaming, it does not support a
+reconfiguration which requires bigger buffer size than what is already
+internally allocated if the module is enabled. It will return -EBUSY on this
+case. In order to avoid such condition, either disable/reconfigure/enable the
+module or request the necessary buffer size during the first configuration
+while the module is disabled.
+
+The internal buffer size allocation considers the requested configuration's
+minimum buffer size and the value set on buf_size field. If buf_size field is
+out of [minimum, maximum] buffer size range, it's clamped to fit in there.
+The driver then selects the biggest value. The corrected buf_size value is
+written back to user application.
+
+omap3isp_[h3a_af/h3a_aewb/hist]_config.config_counter:
+
+As the configuration doesn't take effect synchronously to the request, the
+driver must provide a way to track this information to provide more accurate
+data. After a configuration is requested, the config_counter returned to user
+space application will be an unique value associated to that request. When
+user application receives an event for buffer availability or when a new
+buffer is requested, this config_counter is used to match a buffer data and a
+configuration.
+
+VIDIOC_OMAP3ISP_STAT_REQ
+------------------------
+
+Send to user space the oldest data available in the internal buffer queue and
+discards such buffer afterwards. The field omap3isp_stat_data.frame_number
+matches with the video buffer's field_count.
+
+
+Technical reference manuals (TRMs) and other documentation
+==========================================================
+
+OMAP 3430 TRM:
+<URL:http://focus.ti.com/pdfs/wtbu/OMAP34xx_ES3.1.x_PUBLIC_TRM_vZM.zip>
+Referenced 2011-03-05.
+
+OMAP 35xx TRM:
+<URL:http://www.ti.com/litv/pdf/spruf98o> Referenced 2011-03-05.
+
+OMAP 3630 TRM:
+<URL:http://focus.ti.com/pdfs/wtbu/OMAP36xx_ES1.x_PUBLIC_TRM_vQ.zip>
+Referenced 2011-03-05.
+
+DM 3730 TRM:
+<URL:http://www.ti.com/litv/pdf/sprugn4h> Referenced 2011-03-06.
+
+
+References
+==========
+
+[1] include/linux/omap3isp.h
+
+[2] http://git.ideasonboard.org/?p=media-ctl.git;a=summary
diff --git a/Documentation/video4linux/pxa_camera.txt b/Documentation/video4linux/pxa_camera.txt
index 4f6d0ca0195..51ed1578b0e 100644
--- a/Documentation/video4linux/pxa_camera.txt
+++ b/Documentation/video4linux/pxa_camera.txt
@@ -84,12 +84,12 @@ DMA usage
        transfer is not started. On "End Of Frame" interrupt, the irq handler
        starts the DMA chain.
      - capture of one videobuffer
-       The DMA chain starts transfering data into videobuffer RAM pages.
-       When all pages are transfered, the DMA irq is raised on "ENDINTR" status
+       The DMA chain starts transferring data into videobuffer RAM pages.
+       When all pages are transferred, the DMA irq is raised on "ENDINTR" status
      - finishing one videobuffer
        The DMA irq handler marks the videobuffer as "done", and removes it from
        the active running queue
-       Meanwhile, the next videobuffer (if there is one), is transfered by DMA
+       Meanwhile, the next videobuffer (if there is one), is transferred by DMA
      - finishing the last videobuffer
        On the DMA irq of the last videobuffer, the QCI is stopped.
 
@@ -101,7 +101,7 @@ DMA usage
 
      This structure is pointed by dma->sg_cpu.
      The descriptors are used as follows :
-      - desc-sg[i]: i-th descriptor, transfering the i-th sg
+      - desc-sg[i]: i-th descriptor, transferring the i-th sg
         element to the video buffer scatter gather
       - finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN
       - linker: has ddadr= desc-sg[0] of next video buffer, dcmd=0
diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt
index 73de4050d63..b4f67040403 100644
--- a/Documentation/video4linux/sn9c102.txt
+++ b/Documentation/video4linux/sn9c102.txt
@@ -214,10 +214,10 @@ Syntax:         <n>
 Description:    Debugging information level, from 0 to 3:
 		0 = none (use carefully)
 		1 = critical errors
-		2 = significant informations
+		2 = significant information
 		3 = more verbose messages
 		Level 3 is useful for testing only. It also shows some more
-		informations about the hardware being detected.
+		information about the hardware being detected.
 		This parameter can be changed at runtime thanks to the /sys
 		filesystem interface.
 Default:        2
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index f22f35c271f..cf21f7aae97 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -71,6 +71,10 @@ sub-device instances, the video_device struct stores V4L2 device node data
 and in the future a v4l2_fh struct will keep track of filehandle instances
 (this is not yet implemented).
 
+The V4L2 framework also optionally integrates with the media framework. If a
+driver sets the struct v4l2_device mdev field, sub-devices and video nodes
+will automatically appear in the media framework as entities.
+
 
 struct v4l2_device
 ------------------
@@ -83,11 +87,20 @@ You must register the device instance:
 
 	v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev);
 
-Registration will initialize the v4l2_device struct and link dev->driver_data
-to v4l2_dev. If v4l2_dev->name is empty then it will be set to a value derived
-from dev (driver name followed by the bus_id, to be precise). If you set it
-up before calling v4l2_device_register then it will be untouched. If dev is
-NULL, then you *must* setup v4l2_dev->name before calling v4l2_device_register.
+Registration will initialize the v4l2_device struct. If the dev->driver_data
+field is NULL, it will be linked to v4l2_dev.
+
+Drivers that want integration with the media device framework need to set
+dev->driver_data manually to point to the driver-specific device structure
+that embed the struct v4l2_device instance. This is achieved by a
+dev_set_drvdata() call before registering the V4L2 device instance. They must
+also set the struct v4l2_device mdev field to point to a properly initialized
+and registered media_device instance.
+
+If v4l2_dev->name is empty then it will be set to a value derived from dev
+(driver name followed by the bus_id, to be precise). If you set it up before
+calling v4l2_device_register then it will be untouched. If dev is NULL, then
+you *must* setup v4l2_dev->name before calling v4l2_device_register.
 
 You can use v4l2_device_set_name() to set the name based on a driver name and
 a driver-global atomic_t instance. This will generate names like ivtv0, ivtv1,
@@ -108,6 +121,7 @@ You unregister with:
 
 	v4l2_device_unregister(struct v4l2_device *v4l2_dev);
 
+If the dev->driver_data field points to v4l2_dev, it will be reset to NULL.
 Unregistering will also automatically unregister all subdevs from the device.
 
 If you have a hotpluggable device (e.g. a USB device), then when a disconnect
@@ -167,6 +181,21 @@ static int __devinit drv_probe(struct pci_dev *pdev,
 	state->instance = atomic_inc_return(&drv_instance) - 1;
 }
 
+If you have multiple device nodes then it can be difficult to know when it is
+safe to unregister v4l2_device. For this purpose v4l2_device has refcounting
+support. The refcount is increased whenever video_register_device is called and
+it is decreased whenever that device node is released. When the refcount reaches
+zero, then the v4l2_device release() callback is called. You can do your final
+cleanup there.
+
+If other device nodes (e.g. ALSA) are created, then you can increase and
+decrease the refcount manually as well by calling:
+
+void v4l2_device_get(struct v4l2_device *v4l2_dev);
+
+or:
+
+int v4l2_device_put(struct v4l2_device *v4l2_dev);
 
 struct v4l2_subdev
 ------------------
@@ -254,6 +283,26 @@ A sub-device driver initializes the v4l2_subdev struct using:
 Afterwards you need to initialize subdev->name with a unique name and set the
 module owner. This is done for you if you use the i2c helper functions.
 
+If integration with the media framework is needed, you must initialize the
+media_entity struct embedded in the v4l2_subdev struct (entity field) by
+calling media_entity_init():
+
+	struct media_pad *pads = &my_sd->pads;
+	int err;
+
+	err = media_entity_init(&sd->entity, npads, pads, 0);
+
+The pads array must have been previously initialized. There is no need to
+manually set the struct media_entity type and name fields, but the revision
+field must be initialized if needed.
+
+A reference to the entity will be automatically acquired/released when the
+subdev device node (if any) is opened/closed.
+
+Don't forget to cleanup the media entity before the sub-device is destroyed:
+
+	media_entity_cleanup(&sd->entity);
+
 A device (bridge) driver needs to register the v4l2_subdev with the
 v4l2_device:
 
@@ -263,6 +312,9 @@ This can fail if the subdev module disappeared before it could be registered.
 After this function was called successfully the subdev->dev field points to
 the v4l2_device.
 
+If the v4l2_device parent device has a non-NULL mdev field, the sub-device
+entity will be automatically registered with the media device.
+
 You can unregister a sub-device using:
 
 	v4l2_device_unregister_subdev(sd);
@@ -291,7 +343,7 @@ ignored. If you want to check for errors use this:
 	err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_chip_ident, &chip);
 
 Any error except -ENOIOCTLCMD will exit the loop with that error. If no
-errors (except -ENOIOCTLCMD) occured, then 0 is returned.
+errors (except -ENOIOCTLCMD) occurred, then 0 is returned.
 
 The second argument to both calls is a group ID. If 0, then all subdevs are
 called. If non-zero, then only those whose group ID match that value will
@@ -319,6 +371,61 @@ controlled through GPIO pins. This distinction is only relevant when setting
 up the device, but once the subdev is registered it is completely transparent.
 
 
+V4L2 sub-device userspace API
+-----------------------------
+
+Beside exposing a kernel API through the v4l2_subdev_ops structure, V4L2
+sub-devices can also be controlled directly by userspace applications.
+
+Device nodes named v4l-subdevX can be created in /dev to access sub-devices
+directly. If a sub-device supports direct userspace configuration it must set
+the V4L2_SUBDEV_FL_HAS_DEVNODE flag before being registered.
+
+After registering sub-devices, the v4l2_device driver can create device nodes
+for all registered sub-devices marked with V4L2_SUBDEV_FL_HAS_DEVNODE by calling
+v4l2_device_register_subdev_nodes(). Those device nodes will be automatically
+removed when sub-devices are unregistered.
+
+The device node handles a subset of the V4L2 API.
+
+VIDIOC_QUERYCTRL
+VIDIOC_QUERYMENU
+VIDIOC_G_CTRL
+VIDIOC_S_CTRL
+VIDIOC_G_EXT_CTRLS
+VIDIOC_S_EXT_CTRLS
+VIDIOC_TRY_EXT_CTRLS
+
+	The controls ioctls are identical to the ones defined in V4L2. They
+	behave identically, with the only exception that they deal only with
+	controls implemented in the sub-device. Depending on the driver, those
+	controls can be also be accessed through one (or several) V4L2 device
+	nodes.
+
+VIDIOC_DQEVENT
+VIDIOC_SUBSCRIBE_EVENT
+VIDIOC_UNSUBSCRIBE_EVENT
+
+	The events ioctls are identical to the ones defined in V4L2. They
+	behave identically, with the only exception that they deal only with
+	events generated by the sub-device. Depending on the driver, those
+	events can also be reported by one (or several) V4L2 device nodes.
+
+	Sub-device drivers that want to use events need to set the
+	V4L2_SUBDEV_USES_EVENTS v4l2_subdev::flags and initialize
+	v4l2_subdev::nevents to events queue depth before registering the
+	sub-device. After registration events can be queued as usual on the
+	v4l2_subdev::devnode device node.
+
+	To properly support events, the poll() file operation is also
+	implemented.
+
+Private ioctls
+
+	All ioctls not in the above list are passed directly to the sub-device
+	driver through the core::ioctl operation.
+
+
 I2C sub-device drivers
 ----------------------
 
@@ -457,6 +564,10 @@ You should also set these fields:
   Otherwise you give it a pointer to a struct mutex_lock and before any
   of the v4l2_file_operations is called this lock will be taken by the
   core and released afterwards.
+- prio: keeps track of the priorities. Used to implement VIDIOC_G/S_PRIORITY.
+  If left to NULL, then it will use the struct v4l2_prio_state in v4l2_device.
+  If you want to have a separate priority state per (group of) device node(s),
+  then you can point it to your own struct v4l2_prio_state.
 - parent: you only set this if v4l2_device was registered with NULL as
   the parent device struct. This only happens in cases where one hardware
   device has multiple PCI devices that all share the same v4l2_device core.
@@ -466,13 +577,34 @@ You should also set these fields:
   (cx8802). Since the v4l2_device cannot be associated with a particular
   PCI device it is setup without a parent device. But when the struct
   video_device is setup you do know which parent PCI device to use.
+- flags: optional. Set to V4L2_FL_USE_FH_PRIO if you want to let the framework
+  handle the VIDIOC_G/S_PRIORITY ioctls. This requires that you use struct
+  v4l2_fh. Eventually this flag will disappear once all drivers use the core
+  priority handling. But for now it has to be set explicitly.
 
-If you use v4l2_ioctl_ops, then you should set either .unlocked_ioctl or
-.ioctl to video_ioctl2 in your v4l2_file_operations struct.
+If you use v4l2_ioctl_ops, then you should set .unlocked_ioctl to video_ioctl2
+in your v4l2_file_operations struct.
+
+Do not use .ioctl! This is deprecated and will go away in the future.
 
 The v4l2_file_operations struct is a subset of file_operations. The main
 difference is that the inode argument is omitted since it is never used.
 
+If integration with the media framework is needed, you must initialize the
+media_entity struct embedded in the video_device struct (entity field) by
+calling media_entity_init():
+
+	struct media_pad *pad = &my_vdev->pad;
+	int err;
+
+	err = media_entity_init(&vdev->entity, 1, pad, 0);
+
+The pads array must have been previously initialized. There is no need to
+manually set the struct media_entity type and name fields.
+
+A reference to the entity will be automatically acquired/released when the
+video device is opened/closed.
+
 v4l2_file_operations and locking
 --------------------------------
 
@@ -502,6 +634,9 @@ for you.
 		return err;
 	}
 
+If the v4l2_device parent device has a non-NULL mdev field, the video device
+entity will be automatically registered with the media device.
+
 Which device is registered depends on the type argument. The following
 types exist:
 
@@ -577,6 +712,13 @@ release, of course) will return an error as well.
 When the last user of the video device node exits, then the vdev->release()
 callback is called and you can do the final cleanup there.
 
+Don't forget to cleanup the media entity associated with the video device if
+it has been initialized:
+
+	media_entity_cleanup(&vdev->entity);
+
+This can be done from the release callback.
+
 
 video_device helper functions
 -----------------------------
@@ -636,39 +778,25 @@ struct v4l2_fh
 --------------
 
 struct v4l2_fh provides a way to easily keep file handle specific data
-that is used by the V4L2 framework. Using v4l2_fh is optional for
-drivers.
+that is used by the V4L2 framework. New drivers must use struct v4l2_fh
+since it is also used to implement priority handling (VIDIOC_G/S_PRIORITY)
+if the video_device flag V4L2_FL_USE_FH_PRIO is also set.
 
 The users of v4l2_fh (in the V4L2 framework, not the driver) know
 whether a driver uses v4l2_fh as its file->private_data pointer by
-testing the V4L2_FL_USES_V4L2_FH bit in video_device->flags.
-
-Useful functions:
-
-- v4l2_fh_init()
-
-  Initialise the file handle. This *MUST* be performed in the driver's
-  v4l2_file_operations->open() handler.
-
-- v4l2_fh_add()
+testing the V4L2_FL_USES_V4L2_FH bit in video_device->flags. This bit is
+set whenever v4l2_fh_init() is called.
 
-  Add a v4l2_fh to video_device file handle list. May be called after
-  initialising the file handle.
-
-- v4l2_fh_del()
-
-  Unassociate the file handle from video_device(). The file handle
-  exit function may now be called.
+struct v4l2_fh is allocated as a part of the driver's own file handle
+structure and file->private_data is set to it in the driver's open
+function by the driver.
 
-- v4l2_fh_exit()
+In many cases the struct v4l2_fh will be embedded in a larger structure.
+In that case you should call v4l2_fh_init+v4l2_fh_add in open() and
+v4l2_fh_del+v4l2_fh_exit in release().
 
-  Uninitialise the file handle. After uninitialisation the v4l2_fh
-  memory can be freed.
-
-struct v4l2_fh is allocated as a part of the driver's own file handle
-structure and is set to file->private_data in the driver's open
-function by the driver. Drivers can extract their own file handle
-structure by using the container_of macro. Example:
+Drivers can extract their own file handle structure by using the container_of
+macro. Example:
 
 struct my_fh {
 	int blah;
@@ -685,15 +813,21 @@ int my_open(struct file *file)
 
 	...
 
+	my_fh = kzalloc(sizeof(*my_fh), GFP_KERNEL);
+
+	...
+
 	ret = v4l2_fh_init(&my_fh->fh, vfd);
-	if (ret)
+	if (ret) {
+		kfree(my_fh);
 		return ret;
+	}
 
-	v4l2_fh_add(&my_fh->fh);
+	...
 
 	file->private_data = &my_fh->fh;
-
-	...
+	v4l2_fh_add(&my_fh->fh);
+	return 0;
 }
 
 int my_release(struct file *file)
@@ -702,8 +836,65 @@ int my_release(struct file *file)
 	struct my_fh *my_fh = container_of(fh, struct my_fh, fh);
 
 	...
+	v4l2_fh_del(&my_fh->fh);
+	v4l2_fh_exit(&my_fh->fh);
+	kfree(my_fh);
+	return 0;
 }
 
+Below is a short description of the v4l2_fh functions used:
+
+int v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev)
+
+  Initialise the file handle. This *MUST* be performed in the driver's
+  v4l2_file_operations->open() handler.
+
+void v4l2_fh_add(struct v4l2_fh *fh)
+
+  Add a v4l2_fh to video_device file handle list. Must be called once the
+  file handle is completely initialized.
+
+void v4l2_fh_del(struct v4l2_fh *fh)
+
+  Unassociate the file handle from video_device(). The file handle
+  exit function may now be called.
+
+void v4l2_fh_exit(struct v4l2_fh *fh)
+
+  Uninitialise the file handle. After uninitialisation the v4l2_fh
+  memory can be freed.
+
+
+If struct v4l2_fh is not embedded, then you can use these helper functions:
+
+int v4l2_fh_open(struct file *filp)
+
+  This allocates a struct v4l2_fh, initializes it and adds it to the struct
+  video_device associated with the file struct.
+
+int v4l2_fh_release(struct file *filp)
+
+  This deletes it from the struct video_device associated with the file
+  struct, uninitialised the v4l2_fh and frees it.
+
+These two functions can be plugged into the v4l2_file_operation's open() and
+release() ops.
+
+
+Several drivers need to do something when the first file handle is opened and
+when the last file handle closes. Two helper functions were added to check
+whether the v4l2_fh struct is the only open filehandle of the associated
+device node:
+
+int v4l2_fh_is_singular(struct v4l2_fh *fh)
+
+  Returns 1 if the file handle is the only open file handle, else 0.
+
+int v4l2_fh_is_singular_file(struct file *filp)
+
+  Same, but it calls v4l2_fh_is_singular with filp->private_data.
+
+
 V4L2 events
 -----------
 
diff --git a/Documentation/video4linux/w9968cf.txt b/Documentation/video4linux/w9968cf.txt
index 05138e8aea0..9649450f3b9 100644
--- a/Documentation/video4linux/w9968cf.txt
+++ b/Documentation/video4linux/w9968cf.txt
@@ -413,7 +413,7 @@ Syntax:         <n>
 Description:    Debugging information level, from 0 to 6:
 		0 = none (use carefully)
 		1 = critical errors
-		2 = significant informations
+		2 = significant information
 		3 = configuration or general messages
 		4 = warnings
 		5 = called functions
diff --git a/Documentation/video4linux/zc0301.txt b/Documentation/video4linux/zc0301.txt
index befdfdacdc5..b41c83cf09f 100644
--- a/Documentation/video4linux/zc0301.txt
+++ b/Documentation/video4linux/zc0301.txt
@@ -181,10 +181,10 @@ Syntax:         <n>
 Description:    Debugging information level, from 0 to 3:
 		0 = none (use carefully)
 		1 = critical errors
-		2 = significant informations
+		2 = significant information
 		3 = more verbose messages
 		Level 3 is useful for testing only, when only one device
-		is used at the same time. It also shows some more informations
+		is used at the same time. It also shows some information
 		about the hardware being detected. This module parameter can be
 		changed at runtime thanks to the /sys filesystem interface.
 Default:        2
@@ -261,7 +261,7 @@ the fingerprint is: '88E8 F32F 7244 68BA 3958  5D40 99DA 5D2A FCE6 35A4'.
 
 11. Credits
 ===========
-- Informations about the chip internals needed to enable the I2C protocol have
+- Information about the chip internals needed to enable the I2C protocol have
   been taken from the documentation of the ZC030x Video4Linux1 driver written
   by Andrew Birkett <andy@nobugs.org>;
 - The initialization values of the ZC0301 controller connected to the PAS202BCB