Merge tag 'v3.16-rc5' into HEAD

Docbook creation was broken. We need to move after
v3.16-rc1-3-ga981296f048b in order to get commit
a981296f048b99b0d5bb4d87c732a6cfb35a1c66.

Linux 3.16-rc5

* tag 'v3.16-rc5': (985 commits)
  Linux 3.16-rc5
  clk: spear3xx: Set proper clock parent of uart1/2
  clk: spear3xx: Use proper control register offset
  parisc: drop unused defines and header includes
  parisc: fix fanotify_mark() syscall on 32bit compat kernel
  parisc: add serial ports of C8000/1GHz machine to hardware database
  ext4: fix potential null pointer dereference in ext4_free_inode
  ext4: fix a potential deadlock in __ext4_es_shrink()
  Documenation/laptops: rename and update hpfall.c
  DocBook: fix various typos
  DocBook: fix mtdnand typos
  scripts/kernel-doc: handle object-like macros
  Documentation/Changes: clean up mcelog paragraph
  ARM: at91: at91sam9x5: add clocks for usb device
  phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove
  phy: core: Fix error path in phy_create()
  drivers: phy: phy-samsung-usb2.c: Add missing MODULE_DEVICE_TABLE
  phy: omap-usb2: fix devm_ioremap_resource error detection code
  phy: sun4i: depend on RESET_CONTROLLER
  USB: serial: ftdi_sio: Add Infineon Triboard
  ...

37 files changed, 304 insertions, 98 deletions

diff --git a/Documentation/Changes b/Documentation/Changes
index 2254db0f00a..227bec88021 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -280,12 +280,9 @@ that is possible.
 mcelog
 ------
 
-In Linux 2.6.31+ the i386 kernel needs to run the mcelog utility
-as a regular cronjob similar to the x86-64 kernel to process and log
-machine check events when CONFIG_X86_NEW_MCE is enabled. Machine check
-events are errors reported by the CPU. Processing them is strongly encouraged.
-All x86-64 kernels since 2.6.4 require the mcelog utility to
-process machine checks.
+On x86 kernels the mcelog utility is needed to process and log machine check
+events when CONFIG_X86_MCE is enabled. Machine check events are errors reported
+by the CPU. Processing them is strongly encouraged.
 
 Getting updated software
 ========================
diff --git a/Documentation/DocBook/gadget.tmpl b/Documentation/DocBook/gadget.tmpl
index 4017f147ba2..2c425d70f7e 100644
--- a/Documentation/DocBook/gadget.tmpl
+++ b/Documentation/DocBook/gadget.tmpl
@@ -708,7 +708,7 @@ hardware level details could be very different.
 
 <para>Systems need specialized hardware support to implement OTG,
 notably including a special <emphasis>Mini-AB</emphasis> jack
-and associated transciever to support <emphasis>Dual-Role</emphasis>
+and associated transceiver to support <emphasis>Dual-Role</emphasis>
 operation:
 they can act either as a host, using the standard
 Linux-USB host side driver stack,
diff --git a/Documentation/DocBook/genericirq.tmpl b/Documentation/DocBook/genericirq.tmpl
index 46347f60335..59fb5c07754 100644
--- a/Documentation/DocBook/genericirq.tmpl
+++ b/Documentation/DocBook/genericirq.tmpl
@@ -182,7 +182,7 @@
 	<para>
 	Each interrupt is described by an interrupt descriptor structure
 	irq_desc. The interrupt is referenced by an 'unsigned int' numeric
-	value which selects the corresponding interrupt decription structure
+	value which selects the corresponding interrupt description structure
 	in the descriptor structures array.
 	The descriptor structure contains status information and pointers
 	to the interrupt flow method and the interrupt chip structure
@@ -470,7 +470,7 @@ if (desc->irq_data.chip->irq_eoi)
      <para>
        To avoid copies of identical implementations of IRQ chips the
        core provides a configurable generic interrupt chip
-       implementation. Developers should check carefuly whether the
+       implementation. Developers should check carefully whether the
        generic chip fits their needs before implementing the same
        functionality slightly differently themselves.
      </para>
diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index 19f2a5a5a5b..e584ee12a1e 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -1760,7 +1760,7 @@ as it would be on UP.
 </para>
 
 <para>
-There is a furthur optimization possible here: remember our original
+There is a further optimization possible here: remember our original
 cache code, where there were no reference counts and the caller simply
 held the lock whenever using the object?  This is still possible: if
 you hold the lock, no one can delete the object, so you don't need to
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index deb71baed32..d7fcdc5a437 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -677,7 +677,7 @@ and other resources, etc.
 
 	<listitem>
 	<para>
-	ATA_QCFLAG_ACTIVE is clared from qc->flags.
+	ATA_QCFLAG_ACTIVE is cleared from qc->flags.
 	</para>
 	</listitem>
 
@@ -708,7 +708,7 @@ and other resources, etc.
 
 	   <listitem>
 	   <para>
-	   qc->waiting is claread &amp; completed (in that order).
+	   qc->waiting is cleared &amp; completed (in that order).
 	   </para>
 	   </listitem>
 
@@ -1163,7 +1163,7 @@ and other resources, etc.
 
 	<para>
 	Once sense data is acquired, this type of errors can be
-	handled similary to other SCSI errors.  Note that sense data
+	handled similarly to other SCSI errors.  Note that sense data
 	may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR
 	&amp;&amp; ASC/ASCQ 47h/00h SCSI PARITY ERROR).  In such
 	cases, the error should be considered as an ATA bus error and
diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile
index 1d27f0a1abd..639e7485796 100644
--- a/Documentation/DocBook/media/Makefile
+++ b/Documentation/DocBook/media/Makefile
@@ -202,8 +202,8 @@ $(MEDIA_OBJ_DIR)/%: $(MEDIA_SRC_DIR)/%.b64
 
 $(MEDIA_OBJ_DIR)/v4l2.xml: $(OBJIMGFILES)
 	@$($(quiet)gen_xml)
-	@(ln -sf $(MEDIA_SRC_DIR)/v4l/*xml $(MEDIA_OBJ_DIR)/)
-	@(ln -sf $(MEDIA_SRC_DIR)/dvb/*xml $(MEDIA_OBJ_DIR)/)
+	@(ln -sf `cd $(MEDIA_SRC_DIR) && /bin/pwd`/v4l/*xml $(MEDIA_OBJ_DIR)/)
+	@(ln -sf `cd $(MEDIA_SRC_DIR) && /bin/pwd`/dvb/*xml $(MEDIA_OBJ_DIR)/)
 
 $(MEDIA_OBJ_DIR)/videodev2.h.xml: $(srctree)/include/uapi/linux/videodev2.h $(MEDIA_OBJ_DIR)/v4l2.xml
 	@$($(quiet)gen_xml)
diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl
index 4decb46bfa7..03f9a1f8d41 100644
--- a/Documentation/DocBook/media_api.tmpl
+++ b/Documentation/DocBook/media_api.tmpl
@@ -68,7 +68,7 @@
 		several digital tv standards. While it is called as DVB API,
 		in fact it covers several different video standards including
 		DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated
-		to documment support also for DVB-S2, ISDB-T and ISDB-S.</para>
+		to document support also for DVB-S2, ISDB-T and ISDB-S.</para>
 	<para>The third part covers the Remote Controller API.</para>
 	<para>The fourth part covers the Media Controller API.</para>
 	<para>For additional information and for the latest development code,
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index cd11926e07c..7da8f0402af 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -91,7 +91,7 @@
 		<listitem><para>
 	  	[MTD Interface]</para><para>
 		These functions provide the interface to the MTD kernel API. 
-		They are not replacable and provide functionality
+		They are not replaceable and provide functionality
 		which is complete hardware independent.
 		</para></listitem>
 		<listitem><para>
@@ -100,14 +100,14 @@
 		</para></listitem>
 		<listitem><para>
 	  	[GENERIC]</para><para>
-		Generic functions are not replacable and provide functionality
+		Generic functions are not replaceable and provide functionality
 		which is complete hardware independent.
 		</para></listitem>
 		<listitem><para>
 	  	[DEFAULT]</para><para>
 		Default functions provide hardware related functionality which is suitable
 		for most of the implementations. These functions can be replaced by the
-		board driver if neccecary. Those functions are called via pointers in the
+		board driver if necessary. Those functions are called via pointers in the
 		NAND chip description structure. The board driver can set the functions which
 		should be replaced by board dependent functions before calling nand_scan().
 		If the function pointer is NULL on entry to nand_scan() then the pointer
@@ -264,7 +264,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd)
 			is set up nand_scan() is called. This function tries to
 			detect and identify then chip. If a chip is found all the
 			internal data fields are initialized accordingly.
-			The structure(s) have to be zeroed out first and then filled with the neccecary 
+			The structure(s) have to be zeroed out first and then filled with the necessary
 			information about the device.
 		</para>
 		<programlisting>
@@ -327,7 +327,7 @@ module_init(board_init);
 	<sect1 id="Exit_function">
 		<title>Exit function</title>
 		<para>
-			The exit function is only neccecary if the driver is
+			The exit function is only necessary if the driver is
 			compiled as a module. It releases all resources which
 			are held by the chip driver and unregisters the partitions
 			in the MTD layer.
@@ -494,7 +494,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 				in this case. See rts_from4.c and diskonchip.c for 
 				implementation reference. In those cases we must also
 				use bad block tables on FLASH, because the ECC layout is
-				interferring with the bad block marker positions.
+				interfering with the bad block marker positions.
 				See bad block table support for details.
 			</para>
 		</sect2>
@@ -542,7 +542,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 		<para>	
 			nand_scan() calls the function nand_default_bbt(). 
 			nand_default_bbt() selects appropriate default
-			bad block table desriptors depending on the chip information
+			bad block table descriptors depending on the chip information
 			which was retrieved by nand_scan().
 		</para>
 		<para>
@@ -554,7 +554,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 		<sect2 id="Flash_based_tables">
 			<title>Flash based tables</title>
 			<para>
-				It may be desired or neccecary to keep a bad block table in FLASH. 
+				It may be desired or necessary to keep a bad block table in FLASH.
 				For AG-AND chips this is mandatory, as they have no factory marked
 				bad blocks. They have factory marked good blocks. The marker pattern
 				is erased when the block is erased to be reused. So in case of
@@ -565,10 +565,10 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 				of the blocks.
 			</para>
 			<para>
-				The blocks in which the tables are stored are procteted against
+				The blocks in which the tables are stored are protected against
 				accidental access by marking them bad in the memory bad block
 				table. The bad block table management functions are allowed
-				to circumvernt this protection.
+				to circumvent this protection.
 			</para>
 			<para>
 				The simplest way to activate the FLASH based bad block table support 
@@ -592,7 +592,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 				User defined tables are created by filling out a 
 				nand_bbt_descr structure and storing the pointer in the
 				nand_chip structure member bbt_td before calling nand_scan(). 
-				If a mirror table is neccecary a second structure must be
+				If a mirror table is necessary a second structure must be
 				created and a pointer to this structure must be stored
 				in bbt_md inside the nand_chip structure. If the bbt_md 
 				member is set to NULL then only the main table is used
@@ -666,7 +666,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 				<para>
 				For automatic placement some blocks must be reserved for
 				bad block table storage. The number of reserved blocks is defined 
-				in the maxblocks member of the babd block table description structure.
+				in the maxblocks member of the bad block table description structure.
 				Reserving 4 blocks for mirrored tables should be a reasonable number. 
 				This also limits the number of blocks which are scanned for the bad
 				block table ident pattern.
@@ -1068,11 +1068,11 @@ in this page</entry>
   <chapter id="filesystems">
      	<title>Filesystem support</title>
 	<para>
-		The NAND driver provides all neccecary functions for a
+		The NAND driver provides all necessary functions for a
 		filesystem via the MTD interface.
 	</para>
 	<para>
-		Filesystems must be aware of the NAND pecularities and
+		Filesystems must be aware of the NAND peculiarities and
 		restrictions. One major restrictions of NAND Flash is, that you cannot 
 		write as often as you want to a page. The consecutive writes to a page, 
 		before erasing it again, are restricted to 1-3 writes, depending on the 
@@ -1222,7 +1222,7 @@ in this page</entry>
 #define NAND_BBT_VERSION	0x00000100
 /* Create a bbt if none axists */
 #define NAND_BBT_CREATE		0x00000200
-/* Write bbt if neccecary */
+/* Write bbt if necessary */
 #define NAND_BBT_WRITE		0x00001000
 /* Read and write back block contents when writing bbt */
 #define NAND_BBT_SAVECONTENT	0x00002000
diff --git a/Documentation/DocBook/regulator.tmpl b/Documentation/DocBook/regulator.tmpl
index 346e552fa2c..3b08a085d2c 100644
--- a/Documentation/DocBook/regulator.tmpl
+++ b/Documentation/DocBook/regulator.tmpl
@@ -155,7 +155,7 @@
        release regulators.  Functions are
        provided to <link linkend='API-regulator-enable'>enable</link>
        and <link linkend='API-regulator-disable'>disable</link> the
-       reguator and to get and set the runtime parameters of the
+       regulator and to get and set the runtime parameters of the
        regulator.
      </para>
      <para>
diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
index 95618159e29..bbe9c1fd5ce 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -766,10 +766,10 @@ framework to set up sysfs files for this region. Simply leave it alone.
 	<para>
 	The dynamic memory regions will be allocated when the UIO device file,
 	<varname>/dev/uioX</varname> is opened.
-	Simiar to static memory resources, the memory region information for
+	Similar to static memory resources, the memory region information for
 	dynamic regions is then visible via sysfs at
 	<varname>/sys/class/uio/uioX/maps/mapY/*</varname>.
-	The dynmaic memory regions will be freed when the UIO device file is
+	The dynamic memory regions will be freed when the UIO device file is
 	closed. When no processes are holding the device file open, the address
 	returned to userspace is ~0.
 	</para>
diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl
index 8d57c1888dc..85fc0e28576 100644
--- a/Documentation/DocBook/usb.tmpl
+++ b/Documentation/DocBook/usb.tmpl
@@ -153,7 +153,7 @@
 
 	<listitem><para>The Linux USB API supports synchronous calls for
 	control and bulk messages.
-	It also supports asynchnous calls for all kinds of data transfer,
+	It also supports asynchronous calls for all kinds of data transfer,
 	using request structures called "URBs" (USB Request Blocks).
 	</para></listitem>
 
diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
index d0056a4e9c5..6f639d9530b 100644
--- a/Documentation/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -5696,7 +5696,7 @@ struct _snd_pcm_runtime {
 	suspending the PCM operations via
 	<function>snd_pcm_suspend_all()</function> or
 	<function>snd_pcm_suspend()</function>.  It means that the PCM
-	streams are already stoppped when the register snapshot is
+	streams are already stopped when the register snapshot is
 	taken.  But, remember that you don't have to restart the PCM
 	stream in the resume callback. It'll be restarted via 
 	trigger call with <constant>SNDRV_PCM_TRIGGER_RESUME</constant>
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index c6a06b71594..f40578026a0 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -314,6 +314,7 @@ int main(int argc, char *argv[])
 			break;
 		case 'm':
 			strncpy(cpumask, optarg, sizeof(cpumask));
+			cpumask[sizeof(cpumask) - 1] = '\0';
 			maskset = 1;
 			printf("cpumask %s maskset %d\n", cpumask, maskset);
 			break;
diff --git a/Documentation/cpu-freq/intel-pstate.txt b/Documentation/cpu-freq/intel-pstate.txt
index e742d21dbd9..a69ffe1d54d 100644
--- a/Documentation/cpu-freq/intel-pstate.txt
+++ b/Documentation/cpu-freq/intel-pstate.txt
@@ -15,10 +15,13 @@ New sysfs files for controlling P state selection have been added to
 /sys/devices/system/cpu/intel_pstate/
 
       max_perf_pct: limits the maximum P state that will be requested by
-      the driver stated as a percentage of the available performance.
+      the driver stated as a percentage of the available performance. The
+      available (P states) performance may be reduced by the no_turbo
+      setting described below.
 
       min_perf_pct: limits the minimum P state that will be  requested by
-      the driver stated as a percentage of the available performance.
+      the driver stated as a percentage of the max (non-turbo)
+      performance level.
 
       no_turbo: limits the driver to selecting P states below the turbo
       frequency range.
diff --git a/Documentation/devicetree/bindings/arm/armada-38x.txt b/Documentation/devicetree/bindings/arm/armada-38x.txt
index 11f2330a655..ad9f8ed4d9b 100644
--- a/Documentation/devicetree/bindings/arm/armada-38x.txt
+++ b/Documentation/devicetree/bindings/arm/armada-38x.txt
@@ -6,5 +6,15 @@ following property:
 
 Required root node property:
 
- - compatible: must contain either "marvell,armada380" or
-   "marvell,armada385" depending on the variant of the SoC being used.
+ - compatible: must contain "marvell,armada380"
+
+In addition, boards using the Marvell Armada 385 SoC shall have the
+following property before the previous one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada385"
+
+Example:
+
+compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
index 5216b419016..8b4f7b7fe88 100644
--- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
+++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
@@ -9,6 +9,18 @@ Required Properties:
 - reg: physical base address of the controller and length of memory mapped
     region.
 
+Optional Properties:
+- clocks: List of clock handles. The parent clocks of the input clocks to the
+	devices in this power domain are set to oscclk before power gating
+	and restored back after powering on a domain. This is required for
+	all domains which are powered on and off and not required for unused
+	domains.
+- clock-names: The following clocks can be specified:
+	- oscclk: Oscillator clock.
+	- pclkN, clkN: Pairs of parent of input clock and input clock to the
+		devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
+		are supported currently.
+
 Node of a device using power domains must have a samsung,power-domain property
 defined with a phandle to respective power domain.
 
@@ -19,6 +31,14 @@ Example:
 		reg = <0x10023C00 0x10>;
 	};
 
+	mfc_pd: power-domain@10044060 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044060 0x20>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
+			<&clock CLK_MOUT_USER_ACLK333>;
+		clock-names = "oscclk", "pclk0", "clk0";
+	};
+
 Example of the node using power domain:
 
 	node {
diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt
index b513cb8196f..af527ee111c 100644
--- a/Documentation/devicetree/bindings/arm/l2cc.txt
+++ b/Documentation/devicetree/bindings/arm/l2cc.txt
@@ -40,6 +40,9 @@ Optional properties:
 - arm,filter-ranges : <start length> Starting address and length of window to
   filter. Addresses in the filter window are directed to the M1 port. Other
   addresses will go to the M0 port.
+- arm,io-coherent : indicates that the system is operating in an hardware
+  I/O coherent mode. Valid only when the arm,pl310-cache compatible
+  string is used.
 - interrupts : 1 combined interrupt.
 - cache-id-part: cache id part number to be used if it is not present
   on hardware
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
index 5d49f2b37f6..832fe8cc24d 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -48,7 +48,7 @@ adc@12D10000 {
 
 	/* NTC thermistor is a hwmon device */
 	ncp15wb473@0 {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
index c6f66674f19..b117b2e9e1a 100644
--- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
+++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
@@ -3,11 +3,19 @@ NTC Thermistor hwmon sensors
 
 Requires node properties:
 - "compatible" value : one of
-	"ntc,ncp15wb473"
-	"ntc,ncp18wb473"
-	"ntc,ncp21wb473"
-	"ntc,ncp03wb473"
-	"ntc,ncp15wl333"
+	"murata,ncp15wb473"
+	"murata,ncp18wb473"
+	"murata,ncp21wb473"
+	"murata,ncp03wb473"
+	"murata,ncp15wl333"
+
+/* Usage of vendor name "ntc" is deprecated */
+<DEPRECATED>	"ntc,ncp15wb473"
+<DEPRECATED>	"ntc,ncp18wb473"
+<DEPRECATED>	"ntc,ncp21wb473"
+<DEPRECATED>	"ntc,ncp03wb473"
+<DEPRECATED>	"ntc,ncp15wl333"
+
 - "pullup-uv"	Pull up voltage in micro volts
 - "pullup-ohm"	Pull up resistor value in ohms
 - "pulldown-ohm" Pull down resistor value in ohms
@@ -21,7 +29,7 @@ Read more about iio bindings at
 
 Example:
 	ncp15wb473@0 {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
new file mode 100644
index 00000000000..dde6c22ce91
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
@@ -0,0 +1,42 @@
+* Rockchip RK3xxx I2C controller
+
+This driver interfaces with the native I2C controller present in Rockchip
+RK3xxx SoCs.
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c" or
+		"rockchip,rk3288-i2c".
+ - interrupts : interrupt number
+ - clocks : parent clock
+
+Required on RK3066, RK3188 :
+
+ - rockchip,grf : the phandle of the syscon node for the general register
+		  file (GRF)
+ - on those SoCs an alias with the correct I2C bus ID (bit offset in the GRF)
+   is also required.
+
+Optional properties :
+
+ - clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used.
+
+Example:
+
+aliases {
+	i2c0 = &i2c0;
+}
+
+i2c0: i2c@2002d000 {
+	compatible = "rockchip,rk3188-i2c";
+	reg = <0x2002d000 0x1000>;
+	interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	rockchip,grf = <&grf>;
+
+	clock-names = "i2c";
+	clocks = <&cru PCLK_I2C0>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt b/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt
new file mode 100644
index 00000000000..6b765485af7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt
@@ -0,0 +1,41 @@
+
+* Allwinner P2WI (Push/Pull 2 Wire Interface) controller
+
+Required properties :
+
+ - reg             : Offset and length of the register set for the device.
+ - compatible      : Should one of the following:
+                     - "allwinner,sun6i-a31-p2wi"
+ - interrupts      : The interrupt line connected to the P2WI peripheral.
+ - clocks          : The gate clk connected to the P2WI peripheral.
+ - resets          : The reset line connected to the P2WI peripheral.
+
+Optional properties :
+
+ - clock-frequency : Desired P2WI bus clock frequency in Hz. If not set the
+default frequency is 100kHz
+
+A P2WI may contain one child node encoding a P2WI slave device.
+
+Slave device properties:
+  Required properties:
+   - reg           : the I2C slave address used during the initialization
+                     process to switch from I2C to P2WI mode
+
+Example:
+
+	p2wi@01f03400 {
+		compatible = "allwinner,sun6i-a31-p2wi";
+		reg = <0x01f03400 0x400>;
+		interrupts = <0 39 4>;
+		clocks = <&apb0_gates 3>;
+		clock-frequency = <6000000>;
+		resets = <&apb0_rst 3>;
+
+		axp221: pmic@68 {
+			compatible = "x-powers,axp221";
+			reg = <0x68>;
+
+			/* ... */
+		};
+	};
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index 64fd7dec1bb..b3556609a06 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -4,6 +4,13 @@ Required properties:
 
   - compatible: Must contain one of the following:
 
+    - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
+    - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART.
+    - "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART.
+    - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART.
+    - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART.
+    - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART.
+    - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
     - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
     - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
     - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
index b82a268f1bd..bee6ff204ba 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
@@ -23,6 +23,12 @@ Optional properties:
 - spi-max-frequency: Specifies maximum SPI clock frequency,
                      Units - Hz. Definition as per
                      Documentation/devicetree/bindings/spi/spi-bus.txt
+- num-cs:	total number of chipselects
+- cs-gpios:	should specify GPIOs used for chipselects.
+		The gpios will be referred to as reg = <index> in the SPI child
+		nodes.  If unspecified, a single SPI device without a chip
+		select can be used.
+
 
 SPI slave nodes must be children of the SPI master node and can contain
 properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 4d7f3758d1b..46a311e728a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -83,6 +83,7 @@ mosaixtech	Mosaix Technologies, Inc.
 moxa	Moxa
 mpl	MPL AG
 mundoreader	Mundo Reader S.L.
+murata	Murata Manufacturing Co., Ltd.
 mxicy	Macronix International Co., Ltd.
 national	National Semiconductor
 neonode		Neonode Inc.
diff --git a/Documentation/email-clients.txt b/Documentation/email-clients.txt
index 4e30ebaa9e5..9af538be375 100644
--- a/Documentation/email-clients.txt
+++ b/Documentation/email-clients.txt
@@ -1,6 +1,17 @@
 Email clients info for Linux
 ======================================================================
 
+Git
+----------------------------------------------------------------------
+These days most developers use `git send-email` instead of regular
+email clients.  The man page for this is quite good.  On the receiving
+end, maintainers use `git am` to apply the patches.
+
+If you are new to git then send your first patch to yourself.  Save it
+as raw text including all the headers.  Run `git am raw_email.txt` and
+then review the changelog with `git log`.  When that works then send
+the patch to the appropriate mailing list(s).
+
 General Preferences
 ----------------------------------------------------------------------
 Patches for the Linux kernel are submitted via email, preferably as
diff --git a/Documentation/hwmon/ntc_thermistor b/Documentation/hwmon/ntc_thermistor
index 3bfda94096f..057b77029f2 100644
--- a/Documentation/hwmon/ntc_thermistor
+++ b/Documentation/hwmon/ntc_thermistor
@@ -1,7 +1,7 @@
 Kernel driver ntc_thermistor
 =================
 
-Supported thermistors:
+Supported thermistors from Murata:
 * Murata NTC Thermistors NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333
   Prefixes: 'ncp15wb473', 'ncp18wb473', 'ncp21wb473', 'ncp03wb473', 'ncp15wl333'
   Datasheet: Publicly available at Murata
@@ -15,9 +15,9 @@ Authors:
 Description
 -----------
 
-The NTC thermistor is a simple thermistor that requires users to provide the
-resistance and lookup the corresponding compensation table to get the
-temperature input.
+The NTC (Negative Temperature Coefficient) thermistor is a simple thermistor
+that requires users to provide the resistance and lookup the corresponding
+compensation table to get the temperature input.
 
 The NTC driver provides lookup tables with a linear approximation function
 and four circuit models with an option not to use any of the four models.
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index d567a7cc552..c600e2f44a6 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -1171,7 +1171,7 @@ When kbuild executes, the following steps are followed (roughly):
 	      obvious reason.
 
     dtc
-	Create flattend device tree blob object suitable for linking
+	Create flattened device tree blob object suitable for linking
 	into vmlinux. Device tree blobs linked into vmlinux are placed
 	in an init section in the image. Platform code *must* copy the
 	blob to non-init memory prior to calling unflatten_device_tree().
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 6eaa9cdb709..c1b9aa8c5a5 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1474,6 +1474,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	js=		[HW,JOY] Analog joystick
 			See Documentation/input/joystick.txt.
 
+	kaslr/nokaslr	[X86]
+			Enable/disable kernel and module base offset ASLR
+			(Address Space Layout Randomization) if built into
+			the kernel. When CONFIG_HIBERNATION is selected,
+			kASLR is disabled by default. When kASLR is enabled,
+			hibernation will be disabled.
+
 	keepinitrd	[HW,ARM]
 
 	kernelcore=nn[KMG]	[KNL,X86,IA-64,PPC] This parameter
@@ -2110,10 +2117,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	noapic		[SMP,APIC] Tells the kernel to not make use of any
 			IOAPICs that may be present in the system.
 
-	nokaslr		[X86]
-			Disable kernel and module base offset ASLR (Address
-			Space Layout Randomization) if built into the kernel.
-
 	noautogroup	Disable scheduler automatic task group creation.
 
 	nobats		[PPC] Do not use BATs for mapping kernel lowmem
@@ -2184,6 +2187,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			in certain environments such as networked servers or
 			real-time systems.
 
+	nohibernate	[HIBERNATION] Disable hibernation and resume.
+
 	nohz=		[KNL] Boottime enable/disable dynamic ticks
 			Valid arguments: on, off
 			Default: on
@@ -2980,6 +2985,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 		noresume	Don't check if there's a hibernation image
 				present during boot.
 		nocompress	Don't compress/decompress hibernation images.
+		no		Disable hibernation and resume.
 
 	retain_initrd	[RAM] Keep initrd memory after extraction
 
@@ -3124,6 +3130,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			[KNL] Should the soft-lockup detector generate panics.
 			Format: <integer>
 
+	softlockup_all_cpu_backtrace=
+			[KNL] Should the soft-lockup detector generate
+			backtraces on all cpus.
+			Format: <integer>
+
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
 			See Documentation/laptops/sonypi.txt
 
diff --git a/Documentation/laptops/00-INDEX b/Documentation/laptops/00-INDEX
index d13b9a9a9e0..d399ae1fc72 100644
--- a/Documentation/laptops/00-INDEX
+++ b/Documentation/laptops/00-INDEX
@@ -8,8 +8,8 @@ disk-shock-protection.txt
 	- information on hard disk shock protection.
 dslm.c
 	- Simple Disk Sleep Monitor program
-hpfall.c
-	- (HP) laptop accelerometer program for disk protection.
+freefall.c
+	- (HP/DELL) laptop accelerometer program for disk protection.
 laptop-mode.txt
 	- how to conserve battery power using laptop-mode.
 sony-laptop.txt
diff --git a/Documentation/laptops/hpfall.c b/Documentation/laptops/freefall.c
index b85dbbac049..aab2ff09e86 100644
--- a/Documentation/laptops/hpfall.c
+++ b/Documentation/laptops/freefall.c
@@ -1,7 +1,9 @@
-/* Disk protection for HP machines.
+/* Disk protection for HP/DELL machines.
  *
  * Copyright 2008 Eric Piel
  * Copyright 2009 Pavel Machek <pavel@ucw.cz>
+ * Copyright 2012 Sonal Santan
+ * Copyright 2014 Pali Rohár <pali.rohar@gmail.com>
  *
  * GPLv2.
  */
@@ -18,24 +20,31 @@
 #include <signal.h>
 #include <sys/mman.h>
 #include <sched.h>
+#include <syslog.h>
 
-char unload_heads_path[64];
+static int noled;
+static char unload_heads_path[64];
+static char device_path[32];
+static const char app_name[] = "FREE FALL";
 
-int set_unload_heads_path(char *device)
+static int set_unload_heads_path(char *device)
 {
 	char devname[64];
 
 	if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0)
 		return -EINVAL;
-	strncpy(devname, device + 5, sizeof(devname));
+	strncpy(devname, device + 5, sizeof(devname) - 1);
+	strncpy(device_path, device, sizeof(device_path) - 1);
 
 	snprintf(unload_heads_path, sizeof(unload_heads_path) - 1,
 				"/sys/block/%s/device/unload_heads", devname);
 	return 0;
 }
-int valid_disk(void)
+
+static int valid_disk(void)
 {
 	int fd = open(unload_heads_path, O_RDONLY);
+
 	if (fd < 0) {
 		perror(unload_heads_path);
 		return 0;
@@ -45,43 +54,54 @@ int valid_disk(void)
 	return 1;
 }
 
-void write_int(char *path, int i)
+static void write_int(char *path, int i)
 {
 	char buf[1024];
 	int fd = open(path, O_RDWR);
+
 	if (fd < 0) {
 		perror("open");
 		exit(1);
 	}
+
 	sprintf(buf, "%d", i);
+
 	if (write(fd, buf, strlen(buf)) != strlen(buf)) {
 		perror("write");
 		exit(1);
 	}
+
 	close(fd);
 }
 
-void set_led(int on)
+static void set_led(int on)
 {
+	if (noled)
+		return;
 	write_int("/sys/class/leds/hp::hddprotect/brightness", on);
 }
 
-void protect(int seconds)
+static void protect(int seconds)
 {
+	const char *str = (seconds == 0) ? "Unparked" : "Parked";
+
 	write_int(unload_heads_path, seconds*1000);
+	syslog(LOG_INFO, "%s %s disk head\n", str, device_path);
 }
 
-int on_ac(void)
+static int on_ac(void)
 {
-//	/sys/class/power_supply/AC0/online
+	/* /sys/class/power_supply/AC0/online */
+	return 1;
 }
 
-int lid_open(void)
+static int lid_open(void)
 {
-//	/proc/acpi/button/lid/LID/state
+	/* /proc/acpi/button/lid/LID/state */
+	return 1;
 }
 
-void ignore_me(void)
+static void ignore_me(int signum)
 {
 	protect(0);
 	set_led(0);
@@ -90,6 +110,7 @@ void ignore_me(void)
 int main(int argc, char **argv)
 {
 	int fd, ret;
+	struct stat st;
 	struct sched_param param;
 
 	if (argc == 1)
@@ -111,7 +132,16 @@ int main(int argc, char **argv)
 		return EXIT_FAILURE;
 	}
 
-	daemon(0, 0);
+	if (stat("/sys/class/leds/hp::hddprotect/brightness", &st))
+		noled = 1;
+
+	if (daemon(0, 0) != 0) {
+		perror("daemon");
+		return EXIT_FAILURE;
+	}
+
+	openlog(app_name, LOG_CONS | LOG_PID | LOG_NDELAY, LOG_LOCAL1);
+
 	param.sched_priority = sched_get_priority_max(SCHED_FIFO);
 	sched_setscheduler(0, SCHED_FIFO, &param);
 	mlockall(MCL_CURRENT|MCL_FUTURE);
@@ -141,6 +171,7 @@ int main(int argc, char **argv)
 			alarm(20);
 	}
 
+	closelog();
 	close(fd);
 	return EXIT_SUCCESS;
 }
diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt
index f304edb8fbe..45134dc2385 100644
--- a/Documentation/memory-hotplug.txt
+++ b/Documentation/memory-hotplug.txt
@@ -209,15 +209,12 @@ If memory device is found, memory hotplug code will be called.
 
 4.2 Notify memory hot-add event by hand
 ------------
-On powerpc, the firmware does not notify a memory hotplug event to the kernel.
-Therefore, "probe" interface is supported to notify the event to the kernel.
-This interface depends on CONFIG_ARCH_MEMORY_PROBE.
-
-CONFIG_ARCH_MEMORY_PROBE is supported on powerpc only. On x86, this config
-option is disabled by default since ACPI notifies a memory hotplug event to
-the kernel, which performs its hotplug operation as the result. Please
-enable this option if you need the "probe" interface for testing purposes
-on x86.
+On some architectures, the firmware may not notify the kernel of a memory
+hotplug event.  Therefore, the memory "probe" interface is supported to
+explicitly notify the kernel.  This interface depends on
+CONFIG_ARCH_MEMORY_PROBE and can be configured on powerpc, sh, and x86
+if hotplug is supported, although for x86 this should be handled by ACPI
+notification.
 
 Probe interface is located at
 /sys/devices/system/memory/probe
diff --git a/Documentation/ptp/testptp.c b/Documentation/ptp/testptp.c
index f1ac2dae999..ba1d50200c4 100644
--- a/Documentation/ptp/testptp.c
+++ b/Documentation/ptp/testptp.c
@@ -17,6 +17,7 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
+#define _GNU_SOURCE
 #include <errno.h>
 #include <fcntl.h>
 #include <inttypes.h>
@@ -46,12 +47,14 @@
 #define CLOCK_INVALID -1
 #endif
 
-/* When glibc offers the syscall, this will go away. */
+/* clock_adjtime is not available in GLIBC < 2.14 */
+#if !__GLIBC_PREREQ(2, 14)
 #include <sys/syscall.h>
 static int clock_adjtime(clockid_t id, struct timex *tx)
 {
 	return syscall(__NR_clock_adjtime, id, tx);
 }
+#endif
 
 static clockid_t get_clockid(int fd)
 {
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 85c362d8ea3..d1ab5e17eb1 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -286,6 +286,11 @@ STAC92HD83*
   hp-inv-led	HP with broken BIOS for inverted mute LED
   auto		BIOS setup (default)
 
+STAC92HD95
+==========
+  hp-led	LED support for HP laptops
+  hp-bass	Bass HPF setup for HP Spectre 13
+
 STAC9872
 ========
   vaio		VAIO laptop without SPDIF
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 708bb7f1b7e..c14374e7177 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -75,6 +75,7 @@ show up in /proc/sys/kernel:
 - shmall
 - shmmax                      [ sysv ipc ]
 - shmmni
+- softlockup_all_cpu_backtrace
 - stop-a                      [ SPARC only ]
 - sysrq                       ==> Documentation/sysrq.txt
 - sysctl_writes_strict
@@ -783,6 +784,22 @@ via the /proc/sys interface:
 
 ==============================================================
 
+softlockup_all_cpu_backtrace:
+
+This value controls the soft lockup detector thread's behavior
+when a soft lockup condition is detected as to whether or not
+to gather further debug information. If enabled, each cpu will
+be issued an NMI and instructed to capture stack trace.
+
+This feature is only applicable for architectures which support
+NMI.
+
+0: do nothing. This is the default behavior.
+
+1: on detection capture more debug information.
+
+==============================================================
+
 tainted:
 
 Non-zero if the kernel has been tainted.  Numeric values, which
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index bd4b34c0373..4415aa91568 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -702,7 +702,8 @@ The batch value of each per cpu pagelist is also updated as a result.  It is
 set to pcp->high/4.  The upper limit of batch is (PAGE_SHIFT * 8)
 
 The initial value is zero.  Kernel does not use this value at boot time to set
-the high water marks for each per cpu page list.
+the high water marks for each per cpu page list.  If the user writes '0' to this
+sysctl, it will revert to this default behavior.
 
 ==============================================================
 
diff --git a/Documentation/thermal/nouveau_thermal b/Documentation/thermal/nouveau_thermal
index efceb7828f5..60bc29357ac 100644
--- a/Documentation/thermal/nouveau_thermal
+++ b/Documentation/thermal/nouveau_thermal
@@ -4,7 +4,7 @@ Kernel driver nouveau
 Supported chips:
 * NV43+
 
-Authors: Martin Peres (mupuf) <martin.peres@labri.fr>
+Authors: Martin Peres (mupuf) <martin.peres@free.fr>
 
 Description
 ---------
@@ -68,8 +68,9 @@ Your fan can be driven in different modes:
 
 NOTE: Be sure to use the manual mode if you want to drive the fan speed manually
 
-NOTE2: Not all fan management modes may be supported on all chipsets. We are
-working on it.
+NOTE2: When operating in manual mode outside the vbios-defined
+[PWM_min, PWM_max] range, the reported fan speed (RPM) may not be accurate
+depending on your hardware.
 
 Bug reports
 ---------
diff --git a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
index 00e425faa2f..78c9a7b2b58 100644
--- a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
+++ b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
@@ -47,7 +47,6 @@ use constant HIGH_KSWAPD_REWAKEUP		=> 21;
 use constant HIGH_NR_SCANNED			=> 22;
 use constant HIGH_NR_TAKEN			=> 23;
 use constant HIGH_NR_RECLAIMED			=> 24;
-use constant HIGH_NR_CONTIG_DIRTY		=> 25;
 
 my %perprocesspid;
 my %perprocess;
@@ -105,7 +104,7 @@ my $regex_direct_end_default = 'nr_reclaimed=([0-9]*)';
 my $regex_kswapd_wake_default = 'nid=([0-9]*) order=([0-9]*)';
 my $regex_kswapd_sleep_default = 'nid=([0-9]*)';
 my $regex_wakeup_kswapd_default = 'nid=([0-9]*) zid=([0-9]*) order=([0-9]*)';
-my $regex_lru_isolate_default = 'isolate_mode=([0-9]*) order=([0-9]*) nr_requested=([0-9]*) nr_scanned=([0-9]*) nr_taken=([0-9]*) contig_taken=([0-9]*) contig_dirty=([0-9]*) contig_failed=([0-9]*)';
+my $regex_lru_isolate_default = 'isolate_mode=([0-9]*) order=([0-9]*) nr_requested=([0-9]*) nr_scanned=([0-9]*) nr_taken=([0-9]*) file=([0-9]*)';
 my $regex_lru_shrink_inactive_default = 'nid=([0-9]*) zid=([0-9]*) nr_scanned=([0-9]*) nr_reclaimed=([0-9]*) priority=([0-9]*) flags=([A-Z_|]*)';
 my $regex_lru_shrink_active_default = 'lru=([A-Z_]*) nr_scanned=([0-9]*) nr_rotated=([0-9]*) priority=([0-9]*)';
 my $regex_writepage_default = 'page=([0-9a-f]*) pfn=([0-9]*) flags=([A-Z_|]*)';
@@ -200,7 +199,7 @@ $regex_lru_isolate = generate_traceevent_regex(
 			$regex_lru_isolate_default,
 			"isolate_mode", "order",
 			"nr_requested", "nr_scanned", "nr_taken",
-			"contig_taken", "contig_dirty", "contig_failed");
+			"file");
 $regex_lru_shrink_inactive = generate_traceevent_regex(
 			"vmscan/mm_vmscan_lru_shrink_inactive",
 			$regex_lru_shrink_inactive_default,
@@ -375,7 +374,6 @@ EVENT_PROCESS:
 			}
 			my $isolate_mode = $1;
 			my $nr_scanned = $4;
-			my $nr_contig_dirty = $7;
 
 			# To closer match vmstat scanning statistics, only count isolate_both
 			# and isolate_inactive as scanning. isolate_active is rotation
@@ -385,7 +383,6 @@ EVENT_PROCESS:
 			if ($isolate_mode != 2) {
 				$perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
 			}
-			$perprocesspid{$process_pid}->{HIGH_NR_CONTIG_DIRTY} += $nr_contig_dirty;
 		} elsif ($tracepoint eq "mm_vmscan_lru_shrink_inactive") {
 			$details = $6;
 			if ($details !~ /$regex_lru_shrink_inactive/o) {
@@ -539,13 +536,6 @@ sub dump_stats {
 				}
 			}
 		}
-		if ($stats{$process_pid}->{HIGH_NR_CONTIG_DIRTY}) {
-			print "      ";
-			my $count = $stats{$process_pid}->{HIGH_NR_CONTIG_DIRTY};
-			if ($count != 0) {
-				print "contig-dirty=$count ";
-			}
-		}
 
 		print "\n";
 	}