Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull core irq changes from Ingo Molnar:
 "The main changes:

  - generic-irqchip driver additions, cleanups and fixes

  - 3 new irqchip drivers: ARMv7-M NVIC, TB10x and Marvell Orion SoCs

  - irq_get_trigger_type() simplification and cross-arch cleanup

  - various cleanups, simplifications

  - documentation updates"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  softirq: Use _RET_IP_
  genirq: Add the generic chip to the genirq docbook
  genirq: generic-chip: Export some irq_gc_ functions
  genirq: Fix can_request_irq() for IRQs without an action
  irqchip: exynos-combiner: Staticize combiner_init
  irqchip: Add support for ARMv7-M NVIC
  irqchip: Add TB10x interrupt controller driver
  irqdomain: Use irq_get_trigger_type() to get IRQ flags
  MIPS: octeon: Use irq_get_trigger_type() to get IRQ flags
  arm: orion: Use irq_get_trigger_type() to get IRQ flags
  mfd: stmpe: use irq_get_trigger_type() to get IRQ flags
  mfd: twl4030-irq: Use irq_get_trigger_type() to get IRQ flags
  gpio: mvebu: Use irq_get_trigger_type() to get IRQ flags
  genirq: Add irq_get_trigger_type() to get IRQ flags
  genirq: Irqchip: document gcflags arg of irq_alloc_domain_generic_chips
  genirq: Set irq thread to RT priority on creation
  irqchip: Add support for Marvell Orion SoCs
  genirq: Add kerneldoc for irq_disable.
  genirq: irqchip: Add mask to block out invalid irqs
  genirq: Generic chip: Add linear irq domain support
  ...

3 files changed, 99 insertions, 0 deletions

diff --git a/Documentation/DocBook/genericirq.tmpl b/Documentation/DocBook/genericirq.tmpl
index b3422341d65..d16d21b7a3b 100644
--- a/Documentation/DocBook/genericirq.tmpl
+++ b/Documentation/DocBook/genericirq.tmpl
@@ -464,6 +464,19 @@ if (desc->irq_data.chip->irq_eoi)
 	protected via desc->lock, by the generic layer.
      </para>
   </chapter>
+
+  <chapter id="genericchip">
+     <title>Generic interrupt chip</title>
+     <para>
+       To avoid copies of identical implementations of irq chips the
+       core provides a configurable generic interrupt chip
+       implementation. Developers should check carefuly whether the
+       generic chip fits their needs before implementing the same
+       functionality slightly different themself.
+     </para>
+!Ekernel/irq/generic-chip.c
+  </chapter>
+
   <chapter id="structs">
      <title>Structures</title>
      <para>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt
new file mode 100644
index 00000000000..9d52d5afe3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt
@@ -0,0 +1,38 @@
+TB10x Top Level Interrupt Controller
+====================================
+
+The Abilis TB10x SOC contains a custom interrupt controller. It performs
+one-to-one mapping of external interrupt sources to CPU interrupts and
+provides support for reconfigurable trigger modes.
+
+Required properties
+-------------------
+
+- compatible: Should be "abilis,tb10x-ictl"
+- reg: specifies physical base address and size of register range.
+- interrupt-congroller: Identifies the node as an interrupt controller.
+- #interrupt cells: Specifies the number of cells used to encode an interrupt
+  source connected to this controller. The value shall be 2.
+- interrupt-parent: Specifies the parent interrupt controller.
+- interrupts: Specifies the list of interrupt lines which are handled by
+  the interrupt controller in the parent controller's notation. Interrupts
+  are mapped one-to-one to parent interrupts.
+
+Example
+-------
+
+intc: interrupt-controller {	/* Parent interrupt controller */
+	interrupt-controller;
+	#interrupt-cells = <1>;	/* For example below */
+	/* ... */
+};
+
+tb10x_ictl: pic@2000 {		/* TB10x interrupt controller */
+	compatible = "abilis,tb10x-ictl";
+	reg = <0x2000 0x20>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	interrupt-parent = <&intc>;
+	interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29 30 31>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-intc.txt
new file mode 100644
index 00000000000..2c11ac76fac
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-intc.txt
@@ -0,0 +1,48 @@
+Marvell Orion SoC interrupt controllers
+
+* Main interrupt controller
+
+Required properties:
+- compatible: shall be "marvell,orion-intc"
+- reg: base address(es) of interrupt registers starting with CAUSE register
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
+
+The interrupt sources map to the corresponding bits in the interrupt
+registers, i.e.
+- 0 maps to bit 0 of first base address,
+- 1 maps to bit 1 of first base address,
+- 32 maps to bit 0 of second base address, and so on.
+
+Example:
+	intc: interrupt-controller {
+		compatible = "marvell,orion-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		 /* Dove has 64 first level interrupts */
+		reg = <0x20200 0x10>, <0x20210 0x10>;
+	};
+
+* Bridge interrupt controller
+
+Required properties:
+- compatible: shall be "marvell,orion-bridge-intc"
+- reg: base address of bridge interrupt registers starting with CAUSE register
+- interrupts: bridge interrupt of the main interrupt controller
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
+
+Optional properties:
+- marvell,#interrupts: number of interrupts provided by bridge interrupt
+      controller, defaults to 32 if not set
+
+Example:
+	bridge_intc: interrupt-controller {
+		compatible = "marvell,orion-bridge-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x20110 0x8>;
+		interrupts = <0>;
+		/* Dove bridge provides 5 interrupts */
+		marvell,#interrupts = <5>;
+	};