Merge commit 'v2.6.30-rc1' into sched/urgent

Merge reason: update to latest upstream to queue up fix

Signed-off-by: Ingo Molnar <mingo@elte.hu>

175 files changed, 14225 insertions, 4339 deletions

diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 2a39aeba146..d05737aaa84 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -86,6 +86,8 @@ cachetlb.txt
 	- describes the cache/TLB flushing interfaces Linux uses.
 cdrom/
 	- directory with information on the CD-ROM drivers that Linux has.
+cgroups/
+	- cgroups features, including cpusets and memory controller.
 connector/
 	- docs on the netlink based userspace<->kernel space communication mod.
 console/
@@ -98,8 +100,6 @@ cpu-load.txt
 	- document describing how CPU load statistics are collected.
 cpuidle/
 	- info on CPU_IDLE, CPU idle state management subsystem.
-cpusets.txt
-	- documents the cpusets feature; assign CPUs and Mem to a set of tasks.
 cputopology.txt
 	- documentation on how CPU topology info is exported via sysfs.
 cris/
diff --git a/Documentation/ABI/testing/debugfs-kmemtrace b/Documentation/ABI/testing/debugfs-kmemtrace
new file mode 100644
index 00000000000..5e6a92a02d8
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-kmemtrace
@@ -0,0 +1,71 @@
+What:		/sys/kernel/debug/kmemtrace/
+Date:		July 2008
+Contact:	Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
+Description:
+
+In kmemtrace-enabled kernels, the following files are created:
+
+/sys/kernel/debug/kmemtrace/
+	cpu<n>		(0400)	Per-CPU tracing data, see below. (binary)
+	total_overruns	(0400)	Total number of bytes which were dropped from
+				cpu<n> files because of full buffer condition,
+				non-binary. (text)
+	abi_version	(0400)	Kernel's kmemtrace ABI version. (text)
+
+Each per-CPU file should be read according to the relay interface. That is,
+the reader should set affinity to that specific CPU and, as currently done by
+the userspace application (though there are other methods), use poll() with
+an infinite timeout before every read(). Otherwise, erroneous data may be
+read. The binary data has the following _core_ format:
+
+	Event ID	(1 byte)	Unsigned integer, one of:
+		0 - represents an allocation (KMEMTRACE_EVENT_ALLOC)
+		1 - represents a freeing of previously allocated memory
+		    (KMEMTRACE_EVENT_FREE)
+	Type ID		(1 byte)	Unsigned integer, one of:
+		0 - this is a kmalloc() / kfree()
+		1 - this is a kmem_cache_alloc() / kmem_cache_free()
+		2 - this is a __get_free_pages() et al.
+	Event size	(2 bytes)	Unsigned integer representing the
+					size of this event. Used to extend
+					kmemtrace. Discard the bytes you
+					don't know about.
+	Sequence number	(4 bytes)	Signed integer used to reorder data
+					logged on SMP machines. Wraparound
+					must be taken into account, although
+					it is unlikely.
+	Caller address	(8 bytes)	Return address to the caller.
+	Pointer to mem	(8 bytes)	Pointer to target memory area. Can be
+					NULL, but not all such calls might be
+					recorded.
+
+In case of KMEMTRACE_EVENT_ALLOC events, the next fields follow:
+
+	Requested bytes	(8 bytes)	Total number of requested bytes,
+					unsigned, must not be zero.
+	Allocated bytes (8 bytes)	Total number of actually allocated
+					bytes, unsigned, must not be lower
+					than requested bytes.
+	Requested flags	(4 bytes)	GFP flags supplied by the caller.
+	Target CPU	(4 bytes)	Signed integer, valid for event id 1.
+					If equal to -1, target CPU is the same
+					as origin CPU, but the reverse might
+					not be true.
+
+The data is made available in the same endianness the machine has.
+
+Other event ids and type ids may be defined and added. Other fields may be
+added by increasing event size, but see below for details.
+Every modification to the ABI, including new id definitions, are followed
+by bumping the ABI version by one.
+
+Adding new data to the packet (features) is done at the end of the mandatory
+data:
+	Feature size	(2 byte)
+	Feature ID	(1 byte)
+	Feature data	(Feature size - 3 bytes)
+
+
+Users:
+	kmemtrace-user - git://repo.or.cz/kmemtrace-user.git
+
diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy
new file mode 100644
index 00000000000..6434f0df012
--- /dev/null
+++ b/Documentation/ABI/testing/ima_policy
@@ -0,0 +1,61 @@
+What:		security/ima/policy
+Date:		May 2008
+Contact:	Mimi Zohar <zohar@us.ibm.com>
+Description:
+		The Trusted Computing Group(TCG) runtime Integrity
+		Measurement Architecture(IMA) maintains a list of hash
+		values of executables and other sensitive system files
+		loaded into the run-time of this system.  At runtime,
+		the policy can be constrained based on LSM specific data.
+		Policies are loaded into the securityfs file ima/policy
+		by opening the file, writing the rules one at a time and
+		then closing the file.  The new policy takes effect after
+		the file ima/policy is closed.
+
+		rule format: action [condition ...]
+
+		action: measure | dont_measure
+		condition:= base | lsm
+			base:	[[func=] [mask=] [fsmagic=] [uid=]]
+			lsm:	[[subj_user=] [subj_role=] [subj_type=]
+				 [obj_user=] [obj_role=] [obj_type=]]
+
+		base: 	func:= [BPRM_CHECK][FILE_MMAP][INODE_PERMISSION]
+			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
+			fsmagic:= hex value
+			uid:= decimal value
+		lsm:  	are LSM specific
+
+		default policy:
+			# PROC_SUPER_MAGIC
+			dont_measure fsmagic=0x9fa0
+			# SYSFS_MAGIC
+			dont_measure fsmagic=0x62656572
+			# DEBUGFS_MAGIC
+			dont_measure fsmagic=0x64626720
+			# TMPFS_MAGIC
+			dont_measure fsmagic=0x01021994
+			# SECURITYFS_MAGIC
+			dont_measure fsmagic=0x73636673
+
+			measure func=BPRM_CHECK
+			measure func=FILE_MMAP mask=MAY_EXEC
+			measure func=INODE_PERM mask=MAY_READ uid=0
+
+		The default policy measures all executables in bprm_check,
+		all files mmapped executable in file_mmap, and all files
+		open for read by root in inode_permission.
+
+		Examples of LSM specific definitions:
+
+		SELinux:
+			# SELINUX_MAGIC
+			dont_measure fsmagic=0xF97CFF8C
+
+			dont_measure obj_type=var_log_t
+			dont_measure obj_type=auditd_log_t
+			measure subj_user=system_u func=INODE_PERM mask=MAY_READ
+			measure subj_role=system_r func=INODE_PERM mask=MAY_READ
+
+		Smack:
+			measure subj_user=_ func=INODE_PERM mask=MAY_READ
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index ceddcff4082..97ad190e13a 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -1,3 +1,89 @@
+What:		/sys/bus/pci/drivers/.../bind
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device location to this file will cause
+		the driver to attempt to bind to the device found at
+		this location.	This is useful for overriding default
+		bindings.  The format for the location is: DDDD:BB:DD.F.
+		That is Domain:Bus:Device.Function and is the same as
+		found in /sys/bus/pci/devices/.  For example:
+		# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
+		(Note: kernels before 2.6.28 may require echo -n).
+
+What:		/sys/bus/pci/drivers/.../unbind
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device location to this file will cause the
+		driver to attempt to unbind from the device found at
+		this location.	This may be useful when overriding default
+		bindings.  The format for the location is: DDDD:BB:DD.F.
+		That is Domain:Bus:Device.Function and is the same as
+		found in /sys/bus/pci/devices/. For example:
+		# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
+		(Note: kernels before 2.6.28 may require echo -n).
+
+What:		/sys/bus/pci/drivers/.../new_id
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device ID to this file will attempt to
+		dynamically add a new device ID to a PCI device driver.
+		This may allow the driver to support more hardware than
+		was included in the driver's static device ID support
+		table at compile time.  The format for the device ID is:
+		VVVV DDDD SVVV SDDD CCCC MMMM PPPP.  That is Vendor ID,
+		Device ID, Subsystem Vendor ID, Subsystem Device ID,
+		Class, Class Mask, and Private Driver Data.  The Vendor ID
+		and Device ID fields are required, the rest are optional.
+		Upon successfully adding an ID, the driver will probe
+		for the device and attempt to bind to it.  For example:
+		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
+
+What:		/sys/bus/pci/drivers/.../remove_id
+Date:		February 2009
+Contact:	Chris Wright <chrisw@sous-sol.org>
+Description:
+		Writing a device ID to this file will remove an ID
+		that was dynamically added via the new_id sysfs entry.
+		The format for the device ID is:
+		VVVV DDDD SVVV SDDD CCCC MMMM.	That is Vendor ID, Device
+		ID, Subsystem Vendor ID, Subsystem Device ID, Class,
+		and Class Mask.  The Vendor ID and Device ID fields are
+		required, the rest are optional.  After successfully
+		removing an ID, the driver will no longer support the
+		device.  This is useful to ensure auto probing won't
+		match the driver to the device.  For example:
+		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id
+
+What:		/sys/bus/pci/rescan
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of all PCI buses in the system, and
+		re-discover previously removed devices.
+		Depends on CONFIG_HOTPLUG.
+
+What:		/sys/bus/pci/devices/.../remove
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		hot-remove the PCI device and any of its children.
+		Depends on CONFIG_HOTPLUG.
+
+What:		/sys/bus/pci/devices/.../rescan
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of the device's parent bus and all
+		child buses, and re-discover devices removed earlier
+		from this part of the device tree.
+		Depends on CONFIG_HOTPLUG.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bhutchings@solarflare.com>
@@ -9,3 +95,30 @@ Description:
 		that some devices may have malformatted data.  If the
 		underlying VPD has a writable section then the
 		corresponding section of this file will be writable.
+
+What:		/sys/bus/pci/devices/.../virtfnN
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when hardware supports the SR-IOV
+		capability and the Physical Function driver has enabled it.
+		The symbolic link points to the PCI device sysfs entry of the
+		Virtual Function whose index is N (0...MaxVFs-1).
+
+What:		/sys/bus/pci/devices/.../dep_link
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when hardware supports the SR-IOV
+		capability and the Physical Function driver has enabled it,
+		and this device has vendor specific dependencies with others.
+		The symbolic link points to the PCI device sysfs entry of
+		Physical Function this device depends on.
+
+What:		/sys/bus/pci/devices/.../physfn
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when a device is a Virtual Function.
+		The symbolic link points to the PCI device sysfs entry of the
+		Physical Function this device associates with.
diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator
index 873ef1fc156..e091fa87379 100644
--- a/Documentation/ABI/testing/sysfs-class-regulator
+++ b/Documentation/ABI/testing/sysfs-class-regulator
@@ -4,8 +4,8 @@ KernelVersion:	2.6.26
 Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
 		Some regulator directories will contain a field called
-		state. This reports the regulator enable status, for
-		regulators which can report that value.
+		state. This reports the regulator enable control, for
+		regulators which can report that input value.
 
 		This will be one of the following strings:
 
@@ -14,16 +14,54 @@ Description:
 		'unknown'
 
 		'enabled' means the regulator output is ON and is supplying
-		power to the system.
+		power to the system (assuming no error prevents it).
 
 		'disabled' means the regulator output is OFF and is not
-		supplying power to the system..
+		supplying power to the system (unless some non-Linux
+		control has enabled it).
 
 		'unknown' means software cannot determine the state, or
 		the reported state is invalid.
 
 		NOTE: this field can be used in conjunction with microvolts
-		and microamps to determine regulator output levels.
+		or microamps to determine configured regulator output levels.
+
+
+What:		/sys/class/regulator/.../status
+Description:
+		Some regulator directories will contain a field called
+		"status". This reports the current regulator status, for
+		regulators which can report that output value.
+
+		This will be one of the following strings:
+
+			off
+			on
+			error
+			fast
+			normal
+			idle
+			standby
+
+		"off" means the regulator is not supplying power to the
+		system.
+
+		"on" means the regulator is supplying power to the system,
+		and the regulator can't report a detailed operation mode.
+
+		"error" indicates an out-of-regulation status such as being
+		disabled due to thermal shutdown, or voltage being unstable
+		because of problems with the input power supply.
+
+		"fast", "normal", "idle", and "standby" are all detailed
+		regulator operation modes (described elsewhere).  They
+		imply "on", but provide more detail.
+
+		Note that regulator status is a function of many inputs,
+		not limited to control inputs from Linux.  For example,
+		the actual load presented may trigger "error" status; or
+		a regulator may be enabled by another user, even though
+		Linux did not enable it.
 
 
 What:		/sys/class/regulator/.../type
@@ -58,7 +96,7 @@ Description:
 		Some regulator directories will contain a field called
 		microvolts. This holds the regulator output voltage setting
 		measured in microvolts (i.e. E-6 Volts), for regulators
-		which can report that voltage.
+		which can report the control input for voltage.
 
 		NOTE: This value should not be used to determine the regulator
 		output voltage level as this value is the same regardless of
@@ -73,7 +111,7 @@ Description:
 		Some regulator directories will contain a field called
 		microamps. This holds the regulator output current limit
 		setting measured in microamps (i.e. E-6 Amps), for regulators
-		which can report that current.
+		which can report the control input for a current limit.
 
 		NOTE: This value should not be used to determine the regulator
 		output current level as this value is the same regardless of
@@ -87,7 +125,7 @@ Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
 		Some regulator directories will contain a field called
 		opmode. This holds the current regulator operating mode,
-		for regulators which can report it.
+		for regulators which can report that control input value.
 
 		The opmode value can be one of the following strings:
 
@@ -101,7 +139,8 @@ Description:
 
 		NOTE: This value should not be used to determine the regulator
 		output operating mode as this value is the same regardless of
-		whether the regulator is enabled or disabled.
+		whether the regulator is enabled or disabled.  A "status"
+		attribute may be available to determine the actual mode.
 
 
 What:		/sys/class/regulator/.../min_microvolts
diff --git a/Documentation/ABI/testing/sysfs-firmware-memmap b/Documentation/ABI/testing/sysfs-firmware-memmap
index 0d99ee6ae02..eca0d65087d 100644
--- a/Documentation/ABI/testing/sysfs-firmware-memmap
+++ b/Documentation/ABI/testing/sysfs-firmware-memmap
@@ -1,6 +1,6 @@
 What:		/sys/firmware/memmap/
 Date:		June 2008
-Contact:	Bernhard Walle <bwalle@suse.de>
+Contact:	Bernhard Walle <bernhard.walle@gmx.de>
 Description:
 		On all platforms, the firmware provides a memory map which the
 		kernel reads. The resources from that memory map are registered
diff --git a/Documentation/ABI/testing/sysfs-fs-ext4 b/Documentation/ABI/testing/sysfs-fs-ext4
new file mode 100644
index 00000000000..4e79074de28
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-fs-ext4
@@ -0,0 +1,81 @@
+What:		/sys/fs/ext4/<disk>/mb_stats
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		 Controls whether the multiblock allocator should
+		 collect statistics, which are shown during the unmount.
+		 1 means to collect statistics, 0 means not to collect
+		 statistics
+
+What:		/sys/fs/ext4/<disk>/mb_group_prealloc
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The multiblock allocator will round up allocation
+		requests to a multiple of this tuning parameter if the
+		stripe size is not set in the ext4 superblock
+
+What:		/sys/fs/ext4/<disk>/mb_max_to_scan
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The maximum number of extents the multiblock allocator
+		will search to find the best extent
+
+What:		/sys/fs/ext4/<disk>/mb_min_to_scan
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The minimum number of extents the multiblock allocator
+		will search to find the best extent
+
+What:		/sys/fs/ext4/<disk>/mb_order2_req
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Tuning parameter which controls the minimum size for 
+		requests (as a power of 2) where the buddy cache is
+		used
+
+What:		/sys/fs/ext4/<disk>/mb_stream_req
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Files which have fewer blocks than this tunable
+		parameter will have their blocks allocated out of a
+		block group specific preallocation pool, so that small
+		files are packed closely together.  Each large file
+		 will have its blocks allocated out of its own unique
+		 preallocation pool.
+
+What:		/sys/fs/ext4/<disk>/inode_readahead
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Tuning parameter which controls the maximum number of
+		inode table blocks that ext4's inode table readahead
+		algorithm will pre-read into the buffer cache
+
+What:		/sys/fs/ext4/<disk>/delayed_allocation_blocks
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		This file is read-only and shows the number of blocks
+		that are dirty in the page cache, but which do not
+		have their location in the filesystem allocated yet.
+
+What:		/sys/fs/ext4/<disk>/lifetime_write_kbytes
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		This file is read-only and shows the number of kilobytes
+		of data that have been written to this filesystem since it was
+		created.
+
+What:		/sys/fs/ext4/<disk>/session_write_kbytes
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		This file is read-only and shows the number of
+		kilobytes of data that have been written to this
+		filesystem since it was mounted.
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 2a3fcc55e98..d9aa43d78bc 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -609,3 +609,109 @@ size is the size (and should be a page-sized multiple).
 The return value will be either a pointer to the processor virtual
 address of the memory, or an error (via PTR_ERR()) if any part of the
 region is occupied.
+
+Part III - Debug drivers use of the DMA-API
+-------------------------------------------
+
+The DMA-API as described above as some constraints. DMA addresses must be
+released with the corresponding function with the same size for example. With
+the advent of hardware IOMMUs it becomes more and more important that drivers
+do not violate those constraints. In the worst case such a violation can
+result in data corruption up to destroyed filesystems.
+
+To debug drivers and find bugs in the usage of the DMA-API checking code can
+be compiled into the kernel which will tell the developer about those
+violations. If your architecture supports it you can select the "Enable
+debugging of DMA-API usage" option in your kernel configuration. Enabling this
+option has a performance impact. Do not enable it in production kernels.
+
+If you boot the resulting kernel will contain code which does some bookkeeping
+about what DMA memory was allocated for which device. If this code detects an
+error it prints a warning message with some details into your kernel log. An
+example warning message may look like this:
+
+------------[ cut here ]------------
+WARNING: at /data2/repos/linux-2.6-iommu/lib/dma-debug.c:448
+	check_unmap+0x203/0x490()
+Hardware name:
+forcedeth 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong
+	function [device address=0x00000000640444be] [size=66 bytes] [mapped as
+single] [unmapped as page]
+Modules linked in: nfsd exportfs bridge stp llc r8169
+Pid: 0, comm: swapper Tainted: G        W  2.6.28-dmatest-09289-g8bb99c0 #1
+Call Trace:
+ <IRQ>  [<ffffffff80240b22>] warn_slowpath+0xf2/0x130
+ [<ffffffff80647b70>] _spin_unlock+0x10/0x30
+ [<ffffffff80537e75>] usb_hcd_link_urb_to_ep+0x75/0xc0
+ [<ffffffff80647c22>] _spin_unlock_irqrestore+0x12/0x40
+ [<ffffffff8055347f>] ohci_urb_enqueue+0x19f/0x7c0
+ [<ffffffff80252f96>] queue_work+0x56/0x60
+ [<ffffffff80237e10>] enqueue_task_fair+0x20/0x50
+ [<ffffffff80539279>] usb_hcd_submit_urb+0x379/0xbc0
+ [<ffffffff803b78c3>] cpumask_next_and+0x23/0x40
+ [<ffffffff80235177>] find_busiest_group+0x207/0x8a0
+ [<ffffffff8064784f>] _spin_lock_irqsave+0x1f/0x50
+ [<ffffffff803c7ea3>] check_unmap+0x203/0x490
+ [<ffffffff803c8259>] debug_dma_unmap_page+0x49/0x50
+ [<ffffffff80485f26>] nv_tx_done_optimized+0xc6/0x2c0
+ [<ffffffff80486c13>] nv_nic_irq_optimized+0x73/0x2b0
+ [<ffffffff8026df84>] handle_IRQ_event+0x34/0x70
+ [<ffffffff8026ffe9>] handle_edge_irq+0xc9/0x150
+ [<ffffffff8020e3ab>] do_IRQ+0xcb/0x1c0
+ [<ffffffff8020c093>] ret_from_intr+0x0/0xa
+ <EOI> <4>---[ end trace f6435a98e2a38c0e ]---
+
+The driver developer can find the driver and the device including a stacktrace
+of the DMA-API call which caused this warning.
+
+Per default only the first error will result in a warning message. All other
+errors will only silently counted. This limitation exist to prevent the code
+from flooding your kernel log. To support debugging a device driver this can
+be disabled via debugfs. See the debugfs interface documentation below for
+details.
+
+The debugfs directory for the DMA-API debugging code is called dma-api/. In
+this directory the following files can currently be found:
+
+	dma-api/all_errors	This file contains a numeric value. If this
+				value is not equal to zero the debugging code
+				will print a warning for every error it finds
+				into the kernel log. Be carefull with this
+				option. It can easily flood your logs.
+
+	dma-api/disabled	This read-only file contains the character 'Y'
+				if the debugging code is disabled. This can
+				happen when it runs out of memory or if it was
+				disabled at boot time
+
+	dma-api/error_count	This file is read-only and shows the total
+				numbers of errors found.
+
+	dma-api/num_errors	The number in this file shows how many
+				warnings will be printed to the kernel log
+				before it stops. This number is initialized to
+				one at system boot and be set by writing into
+				this file
+
+	dma-api/min_free_entries
+				This read-only file can be read to get the
+				minimum number of free dma_debug_entries the
+				allocator has ever seen. If this value goes
+				down to zero the code will disable itself
+				because it is not longer reliable.
+
+	dma-api/num_free_entries
+				The current number of free dma_debug_entries
+				in the allocator.
+
+If you have this code compiled into your kernel it will be enabled by default.
+If you want to boot without the bookkeeping anyway you can provide
+'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
+Notice that you can not enable it again at runtime. You have to reboot to do
+so.
+
+When the code disables itself at runtime this is most likely because it ran
+out of dma_debug_entries. These entries are preallocated at boot. The number
+of preallocated entries is defined per architecture. If it is too low for you
+boot with 'dma_debug_entries=<your_desired_number>' to overwrite the
+architectural default.
diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt
index b2a4d6d244d..01f24e94bdb 100644
--- a/Documentation/DMA-mapping.txt
+++ b/Documentation/DMA-mapping.txt
@@ -136,7 +136,7 @@ exactly why.
 The standard 32-bit addressing PCI device would do something like
 this:
 
-	if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
 		printk(KERN_WARNING
 		       "mydev: No suitable DMA available.\n");
 		goto ignore_this_device;
@@ -155,9 +155,9 @@ all 64-bits when accessing streaming DMA:
 
 	int using_dac;
 
-	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
 		using_dac = 1;
-	} else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
+	} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
 		using_dac = 0;
 	} else {
 		printk(KERN_WARNING
@@ -170,14 +170,14 @@ the case would look like this:
 
 	int using_dac, consistent_using_dac;
 
-	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
 		using_dac = 1;
 	   	consistent_using_dac = 1;
-		pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
-	} else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
+		pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+	} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
 		using_dac = 0;
 		consistent_using_dac = 0;
-		pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+		pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
 	} else {
 		printk(KERN_WARNING
 		       "mydev: No suitable DMA available.\n");
@@ -192,7 +192,7 @@ check the return value from pci_set_consistent_dma_mask().
 Finally, if your device can only drive the low 24-bits of
 address during PCI bus mastering you might do something like:
 
-	if (pci_set_dma_mask(pdev, DMA_24BIT_MASK)) {
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(24))) {
 		printk(KERN_WARNING
 		       "mydev: 24-bit DMA addressing not available.\n");
 		goto ignore_this_device;
@@ -213,7 +213,7 @@ most specific mask.
 
 Here is pseudo-code showing how this might be done:
 
-	#define PLAYBACK_ADDRESS_BITS	DMA_32BIT_MASK
+	#define PLAYBACK_ADDRESS_BITS	DMA_BIT_MASK(32)
 	#define RECORD_ADDRESS_BITS	0x00ffffff
 
 	struct my_sound_card *card;
diff --git a/Documentation/DocBook/.gitignore b/Documentation/DocBook/.gitignore
index c102c02ecf8..c6def352fe3 100644
--- a/Documentation/DocBook/.gitignore
+++ b/Documentation/DocBook/.gitignore
@@ -4,3 +4,7 @@
 *.html
 *.9.gz
 *.9
+*.aux
+*.dvi
+*.log
+*.out
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index dc3154e4927..a3a83d38f96 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -6,13 +6,14 @@
 # To add a new book the only step required is to add the book to the
 # list of DOCBOOKS.
 
-DOCBOOKS := z8530book.xml mcabook.xml \
+DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
 	    procfs-guide.xml writing_usb_driver.xml networking.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
-	    mac80211.xml debugobjects.xml sh.xml regulator.xml
+	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
+	    alsa-driver-api.xml writing-an-alsa-driver.xml
 
 ###
 # The build process is as follows (targets):
diff --git a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl b/Documentation/DocBook/alsa-driver-api.tmpl
index 9d644f7e241..0230a96f056 100644
--- a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl
+++ b/Documentation/DocBook/alsa-driver-api.tmpl
@@ -1,11 +1,11 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
-
-<book>
-<?dbhtml filename="index.html">
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
 
 <!-- ****************************************************** -->
 <!-- Header  -->
 <!-- ****************************************************** -->
+<book id="ALSA-Driver-API">
   <bookinfo>
     <title>The ALSA Driver API</title>
 
@@ -35,6 +35,8 @@
 
   </bookinfo>
 
+<toc></toc>
+
   <chapter><title>Management of Cards and Devices</title>
      <sect1><title>Card Management</title>
 !Esound/core/init.c
@@ -71,6 +73,10 @@
 !Esound/pci/ac97/ac97_codec.c
 !Esound/pci/ac97/ac97_pcm.c
      </sect1>
+     <sect1><title>Virtual Master Control API</title>
+!Esound/core/vmaster.c
+!Iinclude/sound/control.h
+     </sect1>
   </chapter>
   <chapter><title>MIDI API</title>
      <sect1><title>Raw MIDI API</title>
@@ -89,6 +95,9 @@
      <sect1><title>Hardware-Dependent Devices API</title>
 !Esound/core/hwdep.c
      </sect1>
+     <sect1><title>Jack Abstraction Layer API</title>
+!Esound/core/jack.c
+     </sect1>
      <sect1><title>ISA DMA Helpers</title>
 !Esound/core/isadma.c
      </sect1>
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
new file mode 100644
index 00000000000..94a20fe8fed
--- /dev/null
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -0,0 +1,418 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="LinuxDriversAPI">
+ <bookinfo>
+  <title>Linux Device Drivers</title>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License as published by the Free Software Foundation; either
+     version 2 of the License, or (at your option) any later
+     version.
+   </para>
+
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="Basics">
+     <title>Driver Basics</title>
+     <sect1><title>Driver Entry and Exit points</title>
+!Iinclude/linux/init.h
+     </sect1>
+
+     <sect1><title>Atomic and pointer manipulation</title>
+!Iarch/x86/include/asm/atomic_32.h
+!Iarch/x86/include/asm/unaligned.h
+     </sect1>
+
+     <sect1><title>Delaying, scheduling, and timer routines</title>
+!Iinclude/linux/sched.h
+!Ekernel/sched.c
+!Ekernel/timer.c
+     </sect1>
+     <sect1><title>High-resolution timers</title>
+!Iinclude/linux/ktime.h
+!Iinclude/linux/hrtimer.h
+!Ekernel/hrtimer.c
+     </sect1>
+     <sect1><title>Workqueues and Kevents</title>
+!Ekernel/workqueue.c
+     </sect1>
+     <sect1><title>Internal Functions</title>
+!Ikernel/exit.c
+!Ikernel/signal.c
+!Iinclude/linux/kthread.h
+!Ekernel/kthread.c
+     </sect1>
+
+     <sect1><title>Kernel objects manipulation</title>
+<!--
+X!Iinclude/linux/kobject.h
+-->
+!Elib/kobject.c
+     </sect1>
+
+     <sect1><title>Kernel utility functions</title>
+!Iinclude/linux/kernel.h
+!Ekernel/printk.c
+!Ekernel/panic.c
+!Ekernel/sys.c
+!Ekernel/rcupdate.c
+     </sect1>
+
+     <sect1><title>Device Resource Management</title>
+!Edrivers/base/devres.c
+     </sect1>
+
+  </chapter>
+
+  <chapter id="devdrivers">
+     <title>Device drivers infrastructure</title>
+     <sect1><title>Device Drivers Base</title>
+<!--
+X!Iinclude/linux/device.h
+-->
+!Edrivers/base/driver.c
+!Edrivers/base/core.c
+!Edrivers/base/class.c
+!Edrivers/base/firmware_class.c
+!Edrivers/base/transport_class.c
+<!-- Cannot be included, because
+     attribute_container_add_class_device_adapter
+ and attribute_container_classdev_to_container
+     exceed allowed 44 characters maximum
+X!Edrivers/base/attribute_container.c
+-->
+!Edrivers/base/sys.c
+<!--
+X!Edrivers/base/interface.c
+-->
+!Edrivers/base/platform.c
+!Edrivers/base/bus.c
+     </sect1>
+     <sect1><title>Device Drivers Power Management</title>
+!Edrivers/base/power/main.c
+     </sect1>
+     <sect1><title>Device Drivers ACPI Support</title>
+<!-- Internal functions only
+X!Edrivers/acpi/sleep/main.c
+X!Edrivers/acpi/sleep/wakeup.c
+X!Edrivers/acpi/motherboard.c
+X!Edrivers/acpi/bus.c
+-->
+!Edrivers/acpi/scan.c
+!Idrivers/acpi/scan.c
+<!-- No correct structured comments
+X!Edrivers/acpi/pci_bind.c
+-->
+     </sect1>
+     <sect1><title>Device drivers PnP support</title>
+!Idrivers/pnp/core.c
+<!-- No correct structured comments
+X!Edrivers/pnp/system.c
+ -->
+!Edrivers/pnp/card.c
+!Idrivers/pnp/driver.c
+!Edrivers/pnp/manager.c
+!Edrivers/pnp/support.c
+     </sect1>
+     <sect1><title>Userspace IO devices</title>
+!Edrivers/uio/uio.c
+!Iinclude/linux/uio_driver.h
+     </sect1>
+  </chapter>
+
+  <chapter id="parportdev">
+     <title>Parallel Port Devices</title>
+!Iinclude/linux/parport.h
+!Edrivers/parport/ieee1284.c
+!Edrivers/parport/share.c
+!Idrivers/parport/daisy.c
+  </chapter>
+
+  <chapter id="message_devices">
+	<title>Message-based devices</title>
+     <sect1><title>Fusion message devices</title>
+!Edrivers/message/fusion/mptbase.c
+!Idrivers/message/fusion/mptbase.c
+!Edrivers/message/fusion/mptscsih.c
+!Idrivers/message/fusion/mptscsih.c
+!Idrivers/message/fusion/mptctl.c
+!Idrivers/message/fusion/mptspi.c
+!Idrivers/message/fusion/mptfc.c
+!Idrivers/message/fusion/mptlan.c
+     </sect1>
+     <sect1><title>I2O message devices</title>
+!Iinclude/linux/i2o.h
+!Idrivers/message/i2o/core.h
+!Edrivers/message/i2o/iop.c
+!Idrivers/message/i2o/iop.c
+!Idrivers/message/i2o/config-osm.c
+!Edrivers/message/i2o/exec-osm.c
+!Idrivers/message/i2o/exec-osm.c
+!Idrivers/message/i2o/bus-osm.c
+!Edrivers/message/i2o/device.c
+!Idrivers/message/i2o/device.c
+!Idrivers/message/i2o/driver.c
+!Idrivers/message/i2o/pci.c
+!Idrivers/message/i2o/i2o_block.c
+!Idrivers/message/i2o/i2o_scsi.c
+!Idrivers/message/i2o/i2o_proc.c
+     </sect1>
+  </chapter>
+
+  <chapter id="snddev">
+     <title>Sound Devices</title>
+!Iinclude/sound/core.h
+!Esound/sound_core.c
+!Iinclude/sound/pcm.h
+!Esound/core/pcm.c
+!Esound/core/device.c
+!Esound/core/info.c
+!Esound/core/rawmidi.c
+!Esound/core/sound.c
+!Esound/core/memory.c
+!Esound/core/pcm_memory.c
+!Esound/core/init.c
+!Esound/core/isadma.c
+!Esound/core/control.c
+!Esound/core/pcm_lib.c
+!Esound/core/hwdep.c
+!Esound/core/pcm_native.c
+!Esound/core/memalloc.c
+<!-- FIXME: Removed for now since no structured comments in source
+X!Isound/sound_firmware.c
+-->
+  </chapter>
+
+  <chapter id="uart16x50">
+     <title>16x50 UART Driver</title>
+!Iinclude/linux/serial_core.h
+!Edrivers/serial/serial_core.c
+!Edrivers/serial/8250.c
+  </chapter>
+
+  <chapter id="fbdev">
+     <title>Frame Buffer Library</title>
+
+     <para>
+       The frame buffer drivers depend heavily on four data structures.
+       These structures are declared in include/linux/fb.h.  They are
+       fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs.
+       The last three can be made available to and from userland.
+     </para>
+
+     <para>
+       fb_info defines the current state of a particular video card.
+       Inside fb_info, there exists a fb_ops structure which is a
+       collection of needed functions to make fbdev and fbcon work.
+       fb_info is only visible to the kernel.
+     </para>
+
+     <para>
+       fb_var_screeninfo is used to describe the features of a video card
+       that are user defined.  With fb_var_screeninfo, things such as
+       depth and the resolution may be defined.
+     </para>
+
+     <para>
+       The next structure is fb_fix_screeninfo. This defines the
+       properties of a card that are created when a mode is set and can't
+       be changed otherwise.  A good example of this is the start of the
+       frame buffer memory.  This "locks" the address of the frame buffer
+       memory, so that it cannot be changed or moved.
+     </para>
+
+     <para>
+       The last structure is fb_monospecs. In the old API, there was
+       little importance for fb_monospecs. This allowed for forbidden things
+       such as setting a mode of 800x600 on a fix frequency monitor. With
+       the new API, fb_monospecs prevents such things, and if used
+       correctly, can prevent a monitor from being cooked.  fb_monospecs
+       will not be useful until kernels 2.5.x.
+     </para>
+
+     <sect1><title>Frame Buffer Memory</title>
+!Edrivers/video/fbmem.c
+     </sect1>
+<!--
+     <sect1><title>Frame Buffer Console</title>
+X!Edrivers/video/console/fbcon.c
+     </sect1>
+-->
+     <sect1><title>Frame Buffer Colormap</title>
+!Edrivers/video/fbcmap.c
+     </sect1>
+<!-- FIXME:
+  drivers/video/fbgen.c has no docs, which stuffs up the sgml.  Comment
+  out until somebody adds docs.  KAO
+     <sect1><title>Frame Buffer Generic Functions</title>
+X!Idrivers/video/fbgen.c
+     </sect1>
+KAO -->
+     <sect1><title>Frame Buffer Video Mode Database</title>
+!Idrivers/video/modedb.c
+!Edrivers/video/modedb.c
+     </sect1>
+     <sect1><title>Frame Buffer Macintosh Video Mode Database</title>
+!Edrivers/video/macmodes.c
+     </sect1>
+     <sect1><title>Frame Buffer Fonts</title>
+        <para>
+           Refer to the file drivers/video/console/fonts.c for more information.
+        </para>
+<!-- FIXME: Removed for now since no structured comments in source
+X!Idrivers/video/console/fonts.c
+-->
+     </sect1>
+  </chapter>
+
+  <chapter id="input_subsystem">
+     <title>Input Subsystem</title>
+!Iinclude/linux/input.h
+!Edrivers/input/input.c
+!Edrivers/input/ff-core.c
+!Edrivers/input/ff-memless.c
+  </chapter>
+
+  <chapter id="spi">
+      <title>Serial Peripheral Interface (SPI)</title>
+  <para>
+	SPI is the "Serial Peripheral Interface", widely used with
+	embedded systems because it is a simple and efficient
+	interface:  basically a multiplexed shift register.
+	Its three signal wires hold a clock (SCK, often in the range
+	of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and
+	a "Master In, Slave Out" (MISO) data line.
+	SPI is a full duplex protocol; for each bit shifted out the
+	MOSI line (one per clock) another is shifted in on the MISO line.
+	Those bits are assembled into words of various sizes on the
+	way to and from system memory.
+	An additional chipselect line is usually active-low (nCS);
+	four signals are normally used for each peripheral, plus
+	sometimes an interrupt.
+  </para>
+  <para>
+	The SPI bus facilities listed here provide a generalized
+	interface to declare SPI busses and devices, manage them
+	according to the standard Linux driver model, and perform
+	input/output operations.
+	At this time, only "master" side interfaces are supported,
+	where Linux talks to SPI peripherals and does not implement
+	such a peripheral itself.
+	(Interfaces to support implementing SPI slaves would
+	necessarily look different.)
+  </para>
+  <para>
+	The programming interface is structured around two kinds of driver,
+	and two kinds of device.
+	A "Controller Driver" abstracts the controller hardware, which may
+	be as simple as a set of GPIO pins or as complex as a pair of FIFOs
+	connected to dual DMA engines on the other side of the SPI shift
+	register (maximizing throughput).  Such drivers bridge between
+	whatever bus they sit on (often the platform bus) and SPI, and
+	expose the SPI side of their device as a
+	<structname>struct spi_master</structname>.
+	SPI devices are children of that master, represented as a
+	<structname>struct spi_device</structname> and manufactured from
+	<structname>struct spi_board_info</structname> descriptors which
+	are usually provided by board-specific initialization code.
+	A <structname>struct spi_driver</structname> is called a
+	"Protocol Driver", and is bound to a spi_device using normal
+	driver model calls.
+  </para>
+  <para>
+	The I/O model is a set of queued messages.  Protocol drivers
+	submit one or more <structname>struct spi_message</structname>
+	objects, which are processed and completed asynchronously.
+	(There are synchronous wrappers, however.)  Messages are
+	built from one or more <structname>struct spi_transfer</structname>
+	objects, each of which wraps a full duplex SPI transfer.
+	A variety of protocol tweaking options are needed, because
+	different chips adopt very different policies for how they
+	use the bits transferred with SPI.
+  </para>
+!Iinclude/linux/spi/spi.h
+!Fdrivers/spi/spi.c spi_register_board_info
+!Edrivers/spi/spi.c
+  </chapter>
+
+  <chapter id="i2c">
+     <title>I<superscript>2</superscript>C and SMBus Subsystem</title>
+
+     <para>
+	I<superscript>2</superscript>C (or without fancy typography, "I2C")
+	is an acronym for the "Inter-IC" bus, a simple bus protocol which is
+	widely used where low data rate communications suffice.
+	Since it's also a licensed trademark, some vendors use another
+	name (such as "Two-Wire Interface", TWI) for the same bus.
+	I2C only needs two signals (SCL for clock, SDA for data), conserving
+	board real estate and minimizing signal quality issues.
+	Most I2C devices use seven bit addresses, and bus speeds of up
+	to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
+	found wide use.
+	I2C is a multi-master bus; open drain signaling is used to
+	arbitrate between masters, as well as to handshake and to
+	synchronize clocks from slower clients.
+     </para>
+
+     <para>
+	The Linux I2C programming interfaces support only the master
+	side of bus interactions, not the slave side.
+	The programming interface is structured around two kinds of driver,
+	and two kinds of device.
+	An I2C "Adapter Driver" abstracts the controller hardware; it binds
+	to a physical device (perhaps a PCI device or platform_device) and
+	exposes a <structname>struct i2c_adapter</structname> representing
+	each I2C bus segment it manages.
+	On each I2C bus segment will be I2C devices represented by a
+	<structname>struct i2c_client</structname>.  Those devices will
+	be bound to a <structname>struct i2c_driver</structname>,
+	which should follow the standard Linux driver model.
+	(At this writing, a legacy model is more widely used.)
+	There are functions to perform various I2C protocol operations; at
+	this writing all such functions are usable only from task context.
+     </para>
+
+     <para>
+	The System Management Bus (SMBus) is a sibling protocol.  Most SMBus
+	systems are also I2C conformant.  The electrical constraints are
+	tighter for SMBus, and it standardizes particular protocol messages
+	and idioms.  Controllers that support I2C can also support most
+	SMBus operations, but SMBus controllers don't support all the protocol
+	options that an I2C controller will.
+	There are functions to perform various SMBus protocol operations,
+	either using I2C primitives or by issuing SMBus commands to
+	i2c_adapter devices which don't support those I2C operations.
+     </para>
+
+!Iinclude/linux/i2c.h
+!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
+!Edrivers/i2c/i2c-core.c
+  </chapter>
+
+</book>
diff --git a/Documentation/DocBook/genericirq.tmpl b/Documentation/DocBook/genericirq.tmpl
index 3a882d9a90a..c671a016809 100644
--- a/Documentation/DocBook/genericirq.tmpl
+++ b/Documentation/DocBook/genericirq.tmpl
@@ -440,6 +440,7 @@ desc->chip->end();
      used in the generic IRQ layer.
      </para>
 !Iinclude/linux/irq.h
+!Iinclude/linux/interrupt.h
   </chapter>
 
   <chapter id="pubfunctions">
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index 5818ff75786..d6ac5d61820 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -38,58 +38,6 @@
 
 <toc></toc>
 
-  <chapter id="Basics">
-     <title>Driver Basics</title>
-     <sect1><title>Driver Entry and Exit points</title>
-!Iinclude/linux/init.h
-     </sect1>
-
-     <sect1><title>Atomic and pointer manipulation</title>
-!Iarch/x86/include/asm/atomic_32.h
-!Iarch/x86/include/asm/unaligned.h
-     </sect1>
-
-     <sect1><title>Delaying, scheduling, and timer routines</title>
-!Iinclude/linux/sched.h
-!Ekernel/sched.c
-!Ekernel/timer.c
-     </sect1>
-     <sect1><title>High-resolution timers</title>
-!Iinclude/linux/ktime.h
-!Iinclude/linux/hrtimer.h
-!Ekernel/hrtimer.c
-     </sect1>
-     <sect1><title>Workqueues and Kevents</title>
-!Ekernel/workqueue.c
-     </sect1>
-     <sect1><title>Internal Functions</title>
-!Ikernel/exit.c
-!Ikernel/signal.c
-!Iinclude/linux/kthread.h
-!Ekernel/kthread.c
-     </sect1>
-
-     <sect1><title>Kernel objects manipulation</title>
-<!--
-X!Iinclude/linux/kobject.h
--->
-!Elib/kobject.c
-     </sect1>
-
-     <sect1><title>Kernel utility functions</title>
-!Iinclude/linux/kernel.h
-!Ekernel/printk.c
-!Ekernel/panic.c
-!Ekernel/sys.c
-!Ekernel/rcupdate.c
-     </sect1>
-
-     <sect1><title>Device Resource Management</title>
-!Edrivers/base/devres.c
-     </sect1>
-
-  </chapter>
-
   <chapter id="adt">
      <title>Data Types</title>
      <sect1><title>Doubly Linked Lists</title>
@@ -251,6 +199,7 @@ X!Edrivers/pci/hotplug.c
 -->
 !Edrivers/pci/probe.c
 !Edrivers/pci/rom.c
+!Edrivers/pci/iov.c
      </sect1>
      <sect1><title>PCI Hotplug Support Library</title>
 !Edrivers/pci/hotplug/pci_hotplug_core.c
@@ -298,62 +247,6 @@ X!Earch/x86/kernel/mca_32.c
 !Ikernel/acct.c
   </chapter>
 
-  <chapter id="devdrivers">
-     <title>Device drivers infrastructure</title>
-     <sect1><title>Device Drivers Base</title>
-<!--
-X!Iinclude/linux/device.h
--->
-!Edrivers/base/driver.c
-!Edrivers/base/core.c
-!Edrivers/base/class.c
-!Edrivers/base/firmware_class.c
-!Edrivers/base/transport_class.c
-<!-- Cannot be included, because
-     attribute_container_add_class_device_adapter
- and attribute_container_classdev_to_container
-     exceed allowed 44 characters maximum
-X!Edrivers/base/attribute_container.c
--->
-!Edrivers/base/sys.c
-<!--
-X!Edrivers/base/interface.c
--->
-!Edrivers/base/platform.c
-!Edrivers/base/bus.c
-     </sect1>
-     <sect1><title>Device Drivers Power Management</title>
-!Edrivers/base/power/main.c
-     </sect1>
-     <sect1><title>Device Drivers ACPI Support</title>
-<!-- Internal functions only
-X!Edrivers/acpi/sleep/main.c
-X!Edrivers/acpi/sleep/wakeup.c
-X!Edrivers/acpi/motherboard.c
-X!Edrivers/acpi/bus.c
--->
-!Edrivers/acpi/scan.c
-!Idrivers/acpi/scan.c
-<!-- No correct structured comments
-X!Edrivers/acpi/pci_bind.c
--->
-     </sect1>
-     <sect1><title>Device drivers PnP support</title>
-!Idrivers/pnp/core.c
-<!-- No correct structured comments
-X!Edrivers/pnp/system.c
- -->
-!Edrivers/pnp/card.c
-!Idrivers/pnp/driver.c
-!Edrivers/pnp/manager.c
-!Edrivers/pnp/support.c
-     </sect1>
-     <sect1><title>Userspace IO devices</title>
-!Edrivers/uio/uio.c
-!Iinclude/linux/uio_driver.h
-     </sect1>
-  </chapter>
-
   <chapter id="blkdev">
      <title>Block Devices</title>
 !Eblock/blk-core.c
@@ -366,7 +259,7 @@ X!Edrivers/pnp/system.c
 !Eblock/blk-tag.c
 !Iblock/blk-tag.c
 !Eblock/blk-integrity.c
-!Iblock/blktrace.c
+!Ikernel/trace/blktrace.c
 !Iblock/genhd.c
 !Eblock/genhd.c
   </chapter>
@@ -381,275 +274,6 @@ X!Edrivers/pnp/system.c
 !Edrivers/char/misc.c
   </chapter>
 
-  <chapter id="parportdev">
-     <title>Parallel Port Devices</title>
-!Iinclude/linux/parport.h
-!Edrivers/parport/ieee1284.c
-!Edrivers/parport/share.c
-!Idrivers/parport/daisy.c
-  </chapter>
-
-  <chapter id="message_devices">
-	<title>Message-based devices</title>
-     <sect1><title>Fusion message devices</title>
-!Edrivers/message/fusion/mptbase.c
-!Idrivers/message/fusion/mptbase.c
-!Edrivers/message/fusion/mptscsih.c
-!Idrivers/message/fusion/mptscsih.c
-!Idrivers/message/fusion/mptctl.c
-!Idrivers/message/fusion/mptspi.c
-!Idrivers/message/fusion/mptfc.c
-!Idrivers/message/fusion/mptlan.c
-     </sect1>
-     <sect1><title>I2O message devices</title>
-!Iinclude/linux/i2o.h
-!Idrivers/message/i2o/core.h
-!Edrivers/message/i2o/iop.c
-!Idrivers/message/i2o/iop.c
-!Idrivers/message/i2o/config-osm.c
-!Edrivers/message/i2o/exec-osm.c
-!Idrivers/message/i2o/exec-osm.c
-!Idrivers/message/i2o/bus-osm.c
-!Edrivers/message/i2o/device.c
-!Idrivers/message/i2o/device.c
-!Idrivers/message/i2o/driver.c
-!Idrivers/message/i2o/pci.c
-!Idrivers/message/i2o/i2o_block.c
-!Idrivers/message/i2o/i2o_scsi.c
-!Idrivers/message/i2o/i2o_proc.c
-     </sect1>
-  </chapter>
-
-  <chapter id="snddev">
-     <title>Sound Devices</title>
-!Iinclude/sound/core.h
-!Esound/sound_core.c
-!Iinclude/sound/pcm.h
-!Esound/core/pcm.c
-!Esound/core/device.c
-!Esound/core/info.c
-!Esound/core/rawmidi.c
-!Esound/core/sound.c
-!Esound/core/memory.c
-!Esound/core/pcm_memory.c
-!Esound/core/init.c
-!Esound/core/isadma.c
-!Esound/core/control.c
-!Esound/core/pcm_lib.c
-!Esound/core/hwdep.c
-!Esound/core/pcm_native.c
-!Esound/core/memalloc.c
-<!-- FIXME: Removed for now since no structured comments in source
-X!Isound/sound_firmware.c
--->
-  </chapter>
-
-  <chapter id="uart16x50">
-     <title>16x50 UART Driver</title>
-!Iinclude/linux/serial_core.h
-!Edrivers/serial/serial_core.c
-!Edrivers/serial/8250.c
-  </chapter>
-
-  <chapter id="fbdev">
-     <title>Frame Buffer Library</title>
-
-     <para>
-       The frame buffer drivers depend heavily on four data structures.  
-       These structures are declared in include/linux/fb.h.  They are 
-       fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs. 
-       The last three can be made available to and from userland. 
-     </para>
-
-     <para>
-       fb_info defines the current state of a particular video card. 
-       Inside fb_info, there exists a fb_ops structure which is a 
-       collection of needed functions to make fbdev and fbcon work.
-       fb_info is only visible to the kernel.
-     </para>
-
-     <para>
-       fb_var_screeninfo is used to describe the features of a video card 
-       that are user defined.  With fb_var_screeninfo, things such as
-       depth and the resolution may be defined.
-     </para>
-
-     <para>
-       The next structure is fb_fix_screeninfo. This defines the 
-       properties of a card that are created when a mode is set and can't 
-       be changed otherwise.  A good example of this is the start of the 
-       frame buffer memory.  This "locks" the address of the frame buffer
-       memory, so that it cannot be changed or moved.
-     </para>
-
-     <para>
-       The last structure is fb_monospecs. In the old API, there was 
-       little importance for fb_monospecs. This allowed for forbidden things 
-       such as setting a mode of 800x600 on a fix frequency monitor. With 
-       the new API, fb_monospecs prevents such things, and if used 
-       correctly, can prevent a monitor from being cooked.  fb_monospecs
-       will not be useful until kernels 2.5.x.
-     </para>
-
-     <sect1><title>Frame Buffer Memory</title>
-!Edrivers/video/fbmem.c
-     </sect1>
-<!--
-     <sect1><title>Frame Buffer Console</title>
-X!Edrivers/video/console/fbcon.c
-     </sect1>
--->
-     <sect1><title>Frame Buffer Colormap</title>
-!Edrivers/video/fbcmap.c
-     </sect1>
-<!-- FIXME:
-  drivers/video/fbgen.c has no docs, which stuffs up the sgml.  Comment
-  out until somebody adds docs.  KAO
-     <sect1><title>Frame Buffer Generic Functions</title>
-X!Idrivers/video/fbgen.c
-     </sect1>
-KAO -->
-     <sect1><title>Frame Buffer Video Mode Database</title>
-!Idrivers/video/modedb.c
-!Edrivers/video/modedb.c
-     </sect1>
-     <sect1><title>Frame Buffer Macintosh Video Mode Database</title>
-!Edrivers/video/macmodes.c
-     </sect1>
-     <sect1><title>Frame Buffer Fonts</title>
-        <para>
-           Refer to the file drivers/video/console/fonts.c for more information.
-        </para>
-<!-- FIXME: Removed for now since no structured comments in source
-X!Idrivers/video/console/fonts.c
--->
-     </sect1>
-  </chapter>
-
-  <chapter id="input_subsystem">
-     <title>Input Subsystem</title>
-!Iinclude/linux/input.h
-!Edrivers/input/input.c
-!Edrivers/input/ff-core.c
-!Edrivers/input/ff-memless.c
-  </chapter>
-
-  <chapter id="spi">
-      <title>Serial Peripheral Interface (SPI)</title>
-  <para>
-	SPI is the "Serial Peripheral Interface", widely used with
-	embedded systems because it is a simple and efficient
-	interface:  basically a multiplexed shift register.
-	Its three signal wires hold a clock (SCK, often in the range
-	of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and
-	a "Master In, Slave Out" (MISO) data line.
-	SPI is a full duplex protocol; for each bit shifted out the
-	MOSI line (one per clock) another is shifted in on the MISO line.
-	Those bits are assembled into words of various sizes on the
-	way to and from system memory.
-	An additional chipselect line is usually active-low (nCS);
-	four signals are normally used for each peripheral, plus
-	sometimes an interrupt.
-  </para>
-  <para>
-	The SPI bus facilities listed here provide a generalized
-	interface to declare SPI busses and devices, manage them
-	according to the standard Linux driver model, and perform
-	input/output operations.
-	At this time, only "master" side interfaces are supported,
-	where Linux talks to SPI peripherals and does not implement
-	such a peripheral itself.
-	(Interfaces to support implementing SPI slaves would
-	necessarily look different.)
-  </para>
-  <para>
-	The programming interface is structured around two kinds of driver,
-	and two kinds of device.
-	A "Controller Driver" abstracts the controller hardware, which may
-	be as simple as a set of GPIO pins or as complex as a pair of FIFOs
-	connected to dual DMA engines on the other side of the SPI shift
-	register (maximizing throughput).  Such drivers bridge between
-	whatever bus they sit on (often the platform bus) and SPI, and
-	expose the SPI side of their device as a
-	<structname>struct spi_master</structname>.
-	SPI devices are children of that master, represented as a
-	<structname>struct spi_device</structname> and manufactured from
-	<structname>struct spi_board_info</structname> descriptors which
-	are usually provided by board-specific initialization code.
-	A <structname>struct spi_driver</structname> is called a
-	"Protocol Driver", and is bound to a spi_device using normal
-	driver model calls.
-  </para>
-  <para>
-	The I/O model is a set of queued messages.  Protocol drivers
-	submit one or more <structname>struct spi_message</structname>
-	objects, which are processed and completed asynchronously.
-	(There are synchronous wrappers, however.)  Messages are
-	built from one or more <structname>struct spi_transfer</structname>
-	objects, each of which wraps a full duplex SPI transfer.
-	A variety of protocol tweaking options are needed, because
-	different chips adopt very different policies for how they
-	use the bits transferred with SPI.
-  </para>
-!Iinclude/linux/spi/spi.h
-!Fdrivers/spi/spi.c spi_register_board_info
-!Edrivers/spi/spi.c
-  </chapter>
-
-  <chapter id="i2c">
-     <title>I<superscript>2</superscript>C and SMBus Subsystem</title>
-
-     <para>
-	I<superscript>2</superscript>C (or without fancy typography, "I2C")
-	is an acronym for the "Inter-IC" bus, a simple bus protocol which is
-	widely used where low data rate communications suffice.
-	Since it's also a licensed trademark, some vendors use another
-	name (such as "Two-Wire Interface", TWI) for the same bus.
-	I2C only needs two signals (SCL for clock, SDA for data), conserving
-	board real estate and minimizing signal quality issues.
-	Most I2C devices use seven bit addresses, and bus speeds of up
-	to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
-	found wide use.
-	I2C is a multi-master bus; open drain signaling is used to
-	arbitrate between masters, as well as to handshake and to
-	synchronize clocks from slower clients.
-     </para>
-
-     <para>
-	The Linux I2C programming interfaces support only the master
-	side of bus interactions, not the slave side.
-	The programming interface is structured around two kinds of driver,
-	and two kinds of device.
-	An I2C "Adapter Driver" abstracts the controller hardware; it binds
-	to a physical device (perhaps a PCI device or platform_device) and
-	exposes a <structname>struct i2c_adapter</structname> representing
-	each I2C bus segment it manages.
-	On each I2C bus segment will be I2C devices represented by a
-	<structname>struct i2c_client</structname>.  Those devices will
-	be bound to a <structname>struct i2c_driver</structname>,
-	which should follow the standard Linux driver model.
-	(At this writing, a legacy model is more widely used.)
-	There are functions to perform various I2C protocol operations; at
-	this writing all such functions are usable only from task context.
-     </para>
-
-     <para>
-	The System Management Bus (SMBus) is a sibling protocol.  Most SMBus
-	systems are also I2C conformant.  The electrical constraints are
-	tighter for SMBus, and it standardizes particular protocol messages
-	and idioms.  Controllers that support I2C can also support most
-	SMBus operations, but SMBus controllers don't support all the protocol
-	options that an I2C controller will.
-	There are functions to perform various SMBus protocol operations,
-	either using I2C primitives or by issuing SMBus commands to
-	i2c_adapter devices which don't support those I2C operations.
-     </para>
-
-!Iinclude/linux/i2c.h
-!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
-!Edrivers/i2c/i2c-core.c
-  </chapter>
-
   <chapter id="clk">
      <title>Clock Framework</title>
 
diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
index 77c3c202991..fbeaffc1dcc 100644
--- a/Documentation/DocBook/mac80211.tmpl
+++ b/Documentation/DocBook/mac80211.tmpl
@@ -17,8 +17,7 @@
     </authorgroup>
 
     <copyright>
-      <year>2007</year>
-      <year>2008</year>
+      <year>2007-2009</year>
       <holder>Johannes Berg</holder>
     </copyright>
 
@@ -165,8 +164,8 @@ usage should require reading the full document.
 !Pinclude/net/mac80211.h Frame format
       </sect1>
       <sect1>
-        <title>Alignment issues</title>
-        <para>TBD</para>
+        <title>Packet alignment</title>
+!Pnet/mac80211/rx.c Packet alignment
       </sect1>
       <sect1>
         <title>Calling into mac80211 from interrupts</title>
@@ -223,6 +222,17 @@ usage should require reading the full document.
 !Finclude/net/mac80211.h ieee80211_key_flags
     </chapter>
 
+    <chapter id="powersave">
+      <title>Powersave support</title>
+!Pinclude/net/mac80211.h Powersave support
+    </chapter>
+
+    <chapter id="beacon-filter">
+      <title>Beacon filter support</title>
+!Pinclude/net/mac80211.h Beacon filter support
+!Finclude/net/mac80211.h ieee80211_beacon_loss
+    </chapter>
+
     <chapter id="qos">
       <title>Multiple queues and QoS support</title>
       <para>TBD</para>
diff --git a/Documentation/DocBook/procfs_example.c b/Documentation/DocBook/procfs_example.c
index 8c6396e4bf3..a5b11793b1e 100644
--- a/Documentation/DocBook/procfs_example.c
+++ b/Documentation/DocBook/procfs_example.c
@@ -117,9 +117,6 @@ static int __init init_procfs_example(void)
 		rv = -ENOMEM;
 		goto out;
 	}
-	
-	example_dir->owner = THIS_MODULE;
-	
 	/* create jiffies using convenience function */
 	jiffies_file = create_proc_read_entry("jiffies", 
 					      0444, example_dir, 
@@ -130,8 +127,6 @@ static int __init init_procfs_example(void)
 		goto no_jiffies;
 	}
 
-	jiffies_file->owner = THIS_MODULE;
-
 	/* create foo and bar files using same callback
 	 * functions 
 	 */
@@ -146,7 +141,6 @@ static int __init init_procfs_example(void)
 	foo_file->data = &foo_data;
 	foo_file->read_proc = proc_read_foobar;
 	foo_file->write_proc = proc_write_foobar;
-	foo_file->owner = THIS_MODULE;
 		
 	bar_file = create_proc_entry("bar", 0644, example_dir);
 	if(bar_file == NULL) {
@@ -159,7 +153,6 @@ static int __init init_procfs_example(void)
 	bar_file->data = &bar_data;
 	bar_file->read_proc = proc_read_foobar;
 	bar_file->write_proc = proc_write_foobar;
-	bar_file->owner = THIS_MODULE;
 		
 	/* create symlink */
 	symlink = proc_symlink("jiffies_too", example_dir, 
@@ -169,8 +162,6 @@ static int __init init_procfs_example(void)
 		goto no_symlink;
 	}
 
-	symlink->owner = THIS_MODULE;
-
 	/* everything OK */
 	printk(KERN_INFO "%s %s initialised\n",
 	       MODULE_NAME, MODULE_VERS);
diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
index 52e1b79ce0e..8f6e3b2403c 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -42,6 +42,13 @@ GPL version 2.
 
 <revhistory>
 	<revision>
+	<revnumber>0.8</revnumber>
+	<date>2008-12-24</date>
+	<authorinitials>hjk</authorinitials>
+	<revremark>Added name attributes in mem and portio sysfs directories.
+		</revremark>
+	</revision>
+	<revision>
 	<revnumber>0.7</revnumber>
 	<date>2008-12-23</date>
 	<authorinitials>hjk</authorinitials>
@@ -303,12 +310,19 @@ interested in translating it, please email me
 	appear if the size of the mapping is not 0.
 </para>
 <para>
-	Each <filename>mapX/</filename> directory contains two read-only files
-	that show start address and size of the memory:
+	Each <filename>mapX/</filename> directory contains four read-only files
+	that show attributes of the memory:
 </para>
 <itemizedlist>
 <listitem>
 	<para>
+	<filename>name</filename>: A string identifier for this mapping. This
+	is optional, the string can be empty. Drivers can set this to make it
+	easier for userspace to find the correct mapping.
+	</para>
+</listitem>
+<listitem>
+	<para>
 	<filename>addr</filename>: The address of memory that can be mapped.
 	</para>
 </listitem>
@@ -366,12 +380,19 @@ offset = N * getpagesize();
 	<filename>/sys/class/uio/uioX/portio/</filename>.
 </para>
 <para>
-	Each <filename>portX/</filename> directory contains three read-only
-	files that show start, size, and type of the port region:
+	Each <filename>portX/</filename> directory contains four read-only
+	files that show name, start, size, and type of the port region:
 </para>
 <itemizedlist>
 <listitem>
 	<para>
+	<filename>name</filename>: A string identifier for this port region.
+	The string is optional and can be empty. Drivers can set it to make it
+	easier for userspace to find a certain port region.
+	</para>
+</listitem>
+<listitem>
+	<para>
 	<filename>start</filename>: The first port of this region.
 	</para>
 </listitem>
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
index 87a7c07ab65..7a2e0e98986 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -1,11 +1,11 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
-
-<book>
-<?dbhtml filename="index.html">
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
 
 <!-- ****************************************************** -->
 <!-- Header  -->
 <!-- ****************************************************** -->
+<book id="Writing-an-ALSA-Driver">
   <bookinfo>
     <title>Writing an ALSA Driver</title>
     <author>
@@ -492,9 +492,9 @@
           }
 
           /* (2) */
-          card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
-          if (card == NULL)
-                  return -ENOMEM;
+          err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+          if (err < 0)
+                  return err;
 
           /* (3) */
           err = snd_mychip_create(card, pci, &chip);
@@ -590,8 +590,9 @@
             <programlisting>
 <![CDATA[
   struct snd_card *card;
+  int err;
   ....
-  card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
+  err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
 ]]>
             </programlisting>
           </informalexample>
@@ -809,26 +810,28 @@
 
       <para>
         As mentioned above, to create a card instance, call
-      <function>snd_card_new()</function>.
+      <function>snd_card_create()</function>.
 
         <informalexample>
           <programlisting>
 <![CDATA[
   struct snd_card *card;
-  card = snd_card_new(index, id, module, extra_size);
+  int err;
+  err = snd_card_create(index, id, module, extra_size, &card);
 ]]>
           </programlisting>
         </informalexample>
       </para>
 
       <para>
-        The function takes four arguments, the card-index number, the
+        The function takes five arguments, the card-index number, the
         id string, the module pointer (usually
         <constant>THIS_MODULE</constant>),
-        and the size of extra-data space.  The last argument is used to
+        the size of extra-data space, and the pointer to return the
+        card instance.  The extra_size argument is used to
         allocate card-&gt;private_data for the
         chip-specific data.  Note that these data
-        are allocated by <function>snd_card_new()</function>.
+        are allocated by <function>snd_card_create()</function>.
       </para>
     </section>
 
@@ -915,15 +918,16 @@
       </para>
 
       <section id="card-management-chip-specific-snd-card-new">
-        <title>1. Allocating via <function>snd_card_new()</function>.</title>
+        <title>1. Allocating via <function>snd_card_create()</function>.</title>
         <para>
           As mentioned above, you can pass the extra-data-length
-	  to the 4th argument of <function>snd_card_new()</function>, i.e.
+	  to the 4th argument of <function>snd_card_create()</function>, i.e.
 
           <informalexample>
             <programlisting>
 <![CDATA[
-  card = snd_card_new(index[dev], id[dev], THIS_MODULE, sizeof(struct mychip));
+  err = snd_card_create(index[dev], id[dev], THIS_MODULE,
+                        sizeof(struct mychip), &card);
 ]]>
             </programlisting>
           </informalexample>
@@ -952,8 +956,8 @@
 
         <para>
           After allocating a card instance via
-          <function>snd_card_new()</function> (with
-          <constant>NULL</constant> on the 4th arg), call
+          <function>snd_card_create()</function> (with
+          <constant>0</constant> on the 4th arg), call
           <function>kzalloc()</function>. 
 
           <informalexample>
@@ -961,7 +965,7 @@
 <![CDATA[
   struct snd_card *card;
   struct mychip *chip;
-  card = snd_card_new(index[dev], id[dev], THIS_MODULE, NULL);
+  err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
   .....
   chip = kzalloc(sizeof(*chip), GFP_KERNEL);
 ]]>
@@ -1133,8 +1137,8 @@
           if (err < 0)
                   return err;
           /* check PCI availability (28bit DMA) */
-          if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
-              pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+          if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+              pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
                   printk(KERN_ERR "error to set 28bit mask DMA\n");
                   pci_disable_device(pci);
                   return -ENXIO;
@@ -1248,8 +1252,8 @@
   err = pci_enable_device(pci);
   if (err < 0)
           return err;
-  if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
-      pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+  if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+      pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
           printk(KERN_ERR "error to set 28bit mask DMA\n");
           pci_disable_device(pci);
           return -ENXIO;
@@ -5750,8 +5754,9 @@ struct _snd_pcm_runtime {
           ....
           struct snd_card *card;
           struct mychip *chip;
+          int err;
           ....
-          card = snd_card_new(index[dev], id[dev], THIS_MODULE, NULL);
+          err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
           ....
           chip = kzalloc(sizeof(*chip), GFP_KERNEL);
           ....
@@ -5763,7 +5768,7 @@ struct _snd_pcm_runtime {
       </informalexample>
 
 	When you created the chip data with
-	<function>snd_card_new()</function>, it's anyway accessible
+	<function>snd_card_create()</function>, it's anyway accessible
 	via <structfield>private_data</structfield> field.
 
       <informalexample>
@@ -5775,9 +5780,10 @@ struct _snd_pcm_runtime {
           ....
           struct snd_card *card;
           struct mychip *chip;
+          int err;
           ....
-          card = snd_card_new(index[dev], id[dev], THIS_MODULE,
-                              sizeof(struct mychip));
+          err = snd_card_create(index[dev], id[dev], THIS_MODULE,
+                                sizeof(struct mychip), &card);
           ....
           chip = card->private_data;
           ....
diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index 256defd7e17..dcf7acc720e 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -4,506 +4,356 @@
 	Revised Feb 12, 2004 by Martine Silbermann
 		email: Martine.Silbermann@hp.com
 	Revised Jun 25, 2004 by Tom L Nguyen
+	Revised Jul  9, 2008 by Matthew Wilcox <willy@linux.intel.com>
+		Copyright 2003, 2008 Intel Corporation
 
 1. About this guide
 
-This guide describes the basics of Message Signaled Interrupts (MSI),
-the advantages of using MSI over traditional interrupt mechanisms,
-and how to enable your driver to use MSI or MSI-X. Also included is
-a Frequently Asked Questions (FAQ) section.
-
-1.1 Terminology
-
-PCI devices can be single-function or multi-function.  In either case,
-when this text talks about enabling or disabling MSI on a "device
-function," it is referring to one specific PCI device and function and
-not to all functions on a PCI device (unless the PCI device has only
-one function).
-
-2. Copyright 2003 Intel Corporation
-
-3. What is MSI/MSI-X?
-
-Message Signaled Interrupt (MSI), as described in the PCI Local Bus
-Specification Revision 2.3 or later, is an optional feature, and a
-required feature for PCI Express devices. MSI enables a device function
-to request service by sending an Inbound Memory Write on its PCI bus to
-the FSB as a Message Signal Interrupt transaction. Because MSI is
-generated in the form of a Memory Write, all transaction conditions,
-such as a Retry, Master-Abort, Target-Abort or normal completion, are
-supported.
-
-A PCI device that supports MSI must also support pin IRQ assertion
-interrupt mechanism to provide backward compatibility for systems that
-do not support MSI. In systems which support MSI, the bus driver is
-responsible for initializing the message address and message data of
-the device function's MSI/MSI-X capability structure during device
-initial configuration.
-
-An MSI capable device function indicates MSI support by implementing
-the MSI/MSI-X capability structure in its PCI capability list. The
-device function may implement both the MSI capability structure and
-the MSI-X capability structure; however, the bus driver should not
-enable both.
-
-The MSI capability structure contains Message Control register,
-Message Address register and Message Data register. These registers
-provide the bus driver control over MSI. The Message Control register
-indicates the MSI capability supported by the device. The Message
-Address register specifies the target address and the Message Data
-register specifies the characteristics of the message. To request
-service, the device function writes the content of the Message Data
-register to the target address. The device and its software driver
-are prohibited from writing to these registers.
-
-The MSI-X capability structure is an optional extension to MSI. It
-uses an independent and separate capability structure. There are
-some key advantages to implementing the MSI-X capability structure
-over the MSI capability structure as described below.
-
-	- Support a larger maximum number of vectors per function.
-
-	- Provide the ability for system software to configure
-	each vector with an independent message address and message
-	data, specified by a table that resides in Memory Space.
-
-        - MSI and MSI-X both support per-vector masking. Per-vector
-	masking is an optional extension of MSI but a required
-	feature for MSI-X. Per-vector masking provides the kernel the
-	ability to mask/unmask a single MSI while running its
-	interrupt service routine. If per-vector masking is
-	not supported, then the device driver should provide the
-	hardware/software synchronization to ensure that the device
-	generates MSI when the driver wants it to do so.
-
-4. Why use MSI?
-
-As a benefit to the simplification of board design, MSI allows board
-designers to remove out-of-band interrupt routing. MSI is another
-step towards a legacy-free environment.
-
-Due to increasing pressure on chipset and processor packages to
-reduce pin count, the need for interrupt pins is expected to
-diminish over time. Devices, due to pin constraints, may implement
-messages to increase performance.
-
-PCI Express endpoints uses INTx emulation (in-band messages) instead
-of IRQ pin assertion. Using INTx emulation requires interrupt
-sharing among devices connected to the same node (PCI bridge) while
-MSI is unique (non-shared) and does not require BIOS configuration
-support. As a result, the PCI Express technology requires MSI
-support for better interrupt performance.
-
-Using MSI enables the device functions to support two or more
-vectors, which can be configured to target different CPUs to
-increase scalability.
-
-5. Configuring a driver to use MSI/MSI-X
-
-By default, the kernel will not enable MSI/MSI-X on all devices that
-support this capability. The CONFIG_PCI_MSI kernel option
-must be selected to enable MSI/MSI-X support.
-
-5.1 Including MSI/MSI-X support into the kernel
-
-To allow MSI/MSI-X capable device drivers to selectively enable
-MSI/MSI-X (using pci_enable_msi()/pci_enable_msix() as described
-below), the VECTOR based scheme needs to be enabled by setting
-CONFIG_PCI_MSI during kernel config.
-
-Since the target of the inbound message is the local APIC, providing
-CONFIG_X86_LOCAL_APIC must be enabled as well as CONFIG_PCI_MSI.
-
-5.2 Configuring for MSI support
-
-Due to the non-contiguous fashion in vector assignment of the
-existing Linux kernel, this version does not support multiple
-messages regardless of a device function is capable of supporting
-more than one vector. To enable MSI on a device function's MSI
-capability structure requires a device driver to call the function
-pci_enable_msi() explicitly.
-
-5.2.1 API pci_enable_msi
+This guide describes the basics of Message Signaled Interrupts (MSIs),
+the advantages of using MSI over traditional interrupt mechanisms, how
+to change your driver to use MSI or MSI-X and some basic diagnostics to
+try if a device doesn't support MSIs.
 
-int pci_enable_msi(struct pci_dev *dev)
 
-With this new API, a device driver that wants to have MSI
-enabled on its device function must call this API to enable MSI.
-A successful call will initialize the MSI capability structure
-with ONE vector, regardless of whether a device function is
-capable of supporting multiple messages. This vector replaces the
-pre-assigned dev->irq with a new MSI vector. To avoid a conflict
-of the new assigned vector with existing pre-assigned vector requires
-a device driver to call this API before calling request_irq().
+2. What are MSIs?
 
-5.2.2 API pci_disable_msi
+A Message Signaled Interrupt is a write from the device to a special
+address which causes an interrupt to be received by the CPU.
 
-void pci_disable_msi(struct pci_dev *dev)
+The MSI capability was first specified in PCI 2.2 and was later enhanced
+in PCI 3.0 to allow each interrupt to be masked individually.  The MSI-X
+capability was also introduced with PCI 3.0.  It supports more interrupts
+per device than MSI and allows interrupts to be independently configured.
 
-This API should always be used to undo the effect of pci_enable_msi()
-when a device driver is unloading. This API restores dev->irq with
-the pre-assigned IOAPIC vector and switches a device's interrupt
-mode to PCI pin-irq assertion/INTx emulation mode.
-
-Note that a device driver should always call free_irq() on the MSI vector
-that it has done request_irq() on before calling this API. Failure to do
-so results in a BUG_ON() and a device will be left with MSI enabled and
-leaks its vector.
-
-5.2.3 MSI mode vs. legacy mode diagram
-
-The below diagram shows the events which switch the interrupt
-mode on the MSI-capable device function between MSI mode and
-PIN-IRQ assertion mode.
-
-	 ------------   pci_enable_msi 	 ------------------------
-	|	     | <===============	| 			 |
-	| MSI MODE   |	  	     	| PIN-IRQ ASSERTION MODE |
-	| 	     | ===============>	|			 |
- 	 ------------	pci_disable_msi  ------------------------
-
-
-Figure 1. MSI Mode vs. Legacy Mode
-
-In Figure 1, a device operates by default in legacy mode. Legacy
-in this context means PCI pin-irq assertion or PCI-Express INTx
-emulation. A successful MSI request (using pci_enable_msi()) switches
-a device's interrupt mode to MSI mode. A pre-assigned IOAPIC vector
-stored in dev->irq will be saved by the PCI subsystem and a new
-assigned MSI vector will replace dev->irq.
-
-To return back to its default mode, a device driver should always call
-pci_disable_msi() to undo the effect of pci_enable_msi(). Note that a
-device driver should always call free_irq() on the MSI vector it has
-done request_irq() on before calling pci_disable_msi(). Failure to do
-so results in a BUG_ON() and a device will be left with MSI enabled and
-leaks its vector. Otherwise, the PCI subsystem restores a device's
-dev->irq with a pre-assigned IOAPIC vector and marks the released
-MSI vector as unused.
-
-Once being marked as unused, there is no guarantee that the PCI
-subsystem will reserve this MSI vector for a device. Depending on
-the availability of current PCI vector resources and the number of
-MSI/MSI-X requests from other drivers, this MSI may be re-assigned.
-
-For the case where the PCI subsystem re-assigns this MSI vector to
-another driver, a request to switch back to MSI mode may result
-in being assigned a different MSI vector or a failure if no more
-vectors are available.
-
-5.3 Configuring for MSI-X support
-
-Due to the ability of the system software to configure each vector of
-the MSI-X capability structure with an independent message address
-and message data, the non-contiguous fashion in vector assignment of
-the existing Linux kernel has no impact on supporting multiple
-messages on an MSI-X capable device functions. To enable MSI-X on
-a device function's MSI-X capability structure requires its device
-driver to call the function pci_enable_msix() explicitly.
-
-The function pci_enable_msix(), once invoked, enables either
-all or nothing, depending on the current availability of PCI vector
-resources. If the PCI vector resources are available for the number
-of vectors requested by a device driver, this function will configure
-the MSI-X table of the MSI-X capability structure of a device with
-requested messages. To emphasize this reason, for example, a device
-may be capable for supporting the maximum of 32 vectors while its
-software driver usually may request 4 vectors. It is recommended
-that the device driver should call this function once during the
-initialization phase of the device driver.
-
-Unlike the function pci_enable_msi(), the function pci_enable_msix()
-does not replace the pre-assigned IOAPIC dev->irq with a new MSI
-vector because the PCI subsystem writes the 1:1 vector-to-entry mapping
-into the field vector of each element contained in a second argument.
-Note that the pre-assigned IOAPIC dev->irq is valid only if the device
-operates in PIN-IRQ assertion mode. In MSI-X mode, any attempt at
-using dev->irq by the device driver to request for interrupt service
-may result in unpredictable behavior.
-
-For each MSI-X vector granted, a device driver is responsible for calling
-other functions like request_irq(), enable_irq(), etc. to enable
-this vector with its corresponding interrupt service handler. It is
-a device driver's choice to assign all vectors with the same
-interrupt service handler or each vector with a unique interrupt
-service handler.
-
-5.3.1 Handling MMIO address space of MSI-X Table
-
-The PCI 3.0 specification has implementation notes that MMIO address
-space for a device's MSI-X structure should be isolated so that the
-software system can set different pages for controlling accesses to the
-MSI-X structure. The implementation of MSI support requires the PCI
-subsystem, not a device driver, to maintain full control of the MSI-X
-table/MSI-X PBA (Pending Bit Array) and MMIO address space of the MSI-X
-table/MSI-X PBA.  A device driver should not access the MMIO address
-space of the MSI-X table/MSI-X PBA.
-
-5.3.2 API pci_enable_msix
+Devices may support both MSI and MSI-X, but only one can be enabled at
+a time.
 
-int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
 
-This API enables a device driver to request the PCI subsystem
-to enable MSI-X messages on its hardware device. Depending on
-the availability of PCI vectors resources, the PCI subsystem enables
-either all or none of the requested vectors.
+3. Why use MSIs?
+
+There are three reasons why using MSIs can give an advantage over
+traditional pin-based interrupts.
+
+Pin-based PCI interrupts are often shared amongst several devices.
+To support this, the kernel must call each interrupt handler associated
+with an interrupt, which leads to reduced performance for the system as
+a whole.  MSIs are never shared, so this problem cannot arise.
+
+When a device writes data to memory, then raises a pin-based interrupt,
+it is possible that the interrupt may arrive before all the data has
+arrived in memory (this becomes more likely with devices behind PCI-PCI
+bridges).  In order to ensure that all the data has arrived in memory,
+the interrupt handler must read a register on the device which raised
+the interrupt.  PCI transaction ordering rules require that all the data
+arrives in memory before the value can be returned from the register.
+Using MSIs avoids this problem as the interrupt-generating write cannot
+pass the data writes, so by the time the interrupt is raised, the driver
+knows that all the data has arrived in memory.
+
+PCI devices can only support a single pin-based interrupt per function.
+Often drivers have to query the device to find out what event has
+occurred, slowing down interrupt handling for the common case.  With
+MSIs, a device can support more interrupts, allowing each interrupt
+to be specialised to a different purpose.  One possible design gives
+infrequent conditions (such as errors) their own interrupt which allows
+the driver to handle the normal interrupt handling path more efficiently.
+Other possible designs include giving one interrupt to each packet queue
+in a network card or each port in a storage controller.
+
+
+4. How to use MSIs
+
+PCI devices are initialised to use pin-based interrupts.  The device
+driver has to set up the device to use MSI or MSI-X.  Not all machines
+support MSIs correctly, and for those machines, the APIs described below
+will simply fail and the device will continue to use pin-based interrupts.
+
+4.1 Include kernel support for MSIs
+
+To support MSI or MSI-X, the kernel must be built with the CONFIG_PCI_MSI
+option enabled.  This option is only available on some architectures,
+and it may depend on some other options also being set.  For example,
+on x86, you must also enable X86_UP_APIC or SMP in order to see the
+CONFIG_PCI_MSI option.
+
+4.2 Using MSI
+
+Most of the hard work is done for the driver in the PCI layer.  It simply
+has to request that the PCI layer set up the MSI capability for this
+device.
+
+4.2.1 pci_enable_msi
+
+int pci_enable_msi(struct pci_dev *dev)
+
+A successful call will allocate ONE interrupt to the device, regardless
+of how many MSIs the device supports.  The device will be switched from
+pin-based interrupt mode to MSI mode.  The dev->irq number is changed
+to a new number which represents the message signaled interrupt.
+This function should be called before the driver calls request_irq()
+since enabling MSIs disables the pin-based IRQ and the driver will not
+receive interrupts on the old interrupt.
+
+4.2.2 pci_enable_msi_block
+
+int pci_enable_msi_block(struct pci_dev *dev, int count)
+
+This variation on the above call allows a device driver to request multiple
+MSIs.  The MSI specification only allows interrupts to be allocated in
+powers of two, up to a maximum of 2^5 (32).
+
+If this function returns 0, it has succeeded in allocating at least as many
+interrupts as the driver requested (it may have allocated more in order
+to satisfy the power-of-two requirement).  In this case, the function
+enables MSI on this device and updates dev->irq to be the lowest of
+the new interrupts assigned to it.  The other interrupts assigned to
+the device are in the range dev->irq to dev->irq + count - 1.
+
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to request any more MSI interrupts for
+this device.  If this function returns a positive number, it will be
+less than 'count' and indicate the number of interrupts that could have
+been allocated.  In neither case will the irq value have been
+updated, nor will the device have been switched into MSI mode.
+
+The device driver must decide what action to take if
+pci_enable_msi_block() returns a value less than the number asked for.
+Some devices can make use of fewer interrupts than the maximum they
+request; in this case the driver should call pci_enable_msi_block()
+again.  Note that it is not guaranteed to succeed, even when the
+'count' has been reduced to the value returned from a previous call to
+pci_enable_msi_block().  This is because there are multiple constraints
+on the number of vectors that can be allocated; pci_enable_msi_block()
+will return as soon as it finds any constraint that doesn't allow the
+call to succeed.
+
+4.2.3 pci_disable_msi
+
+void pci_disable_msi(struct pci_dev *dev)
 
-Argument 'dev' points to the device (pci_dev) structure.
+This function should be used to undo the effect of pci_enable_msi() or
+pci_enable_msi_block().  Calling it restores dev->irq to the pin-based
+interrupt number and frees the previously allocated message signaled
+interrupt(s).  The interrupt may subsequently be assigned to another
+device, so drivers should not cache the value of dev->irq.
 
-Argument 'entries' is a pointer to an array of msix_entry structs.
-The number of entries is indicated in argument 'nvec'.
-struct msix_entry is defined in /driver/pci/msi.h:
+A device driver must always call free_irq() on the interrupt(s)
+for which it has called request_irq() before calling this function.
+Failure to do so will result in a BUG_ON(), the device will be left with
+MSI enabled and will leak its vector.
+
+4.3 Using MSI-X
+
+The MSI-X capability is much more flexible than the MSI capability.
+It supports up to 2048 interrupts, each of which can be controlled
+independently.  To support this flexibility, drivers must use an array of
+`struct msix_entry':
 
 struct msix_entry {
 	u16 	vector; /* kernel uses to write alloc vector */
 	u16	entry; /* driver uses to specify entry */
 };
 
-A device driver is responsible for initializing the field 'entry' of
-each element with a unique entry supported by MSI-X table. Otherwise,
--EINVAL will be returned as a result. A successful return of zero
-indicates the PCI subsystem completed initializing each of the requested
-entries of the MSI-X table with message address and message data.
-Last but not least, the PCI subsystem will write the 1:1
-vector-to-entry mapping into the field 'vector' of each element. A
-device driver is responsible for keeping track of allocated MSI-X
-vectors in its internal data structure.
-
-A return of zero indicates that the number of MSI-X vectors was
-successfully allocated. A return of greater than zero indicates
-MSI-X vector shortage. Or a return of less than zero indicates
-a failure. This failure may be a result of duplicate entries
-specified in second argument, or a result of no available vector,
-or a result of failing to initialize MSI-X table entries.
-
-5.3.3 API pci_disable_msix
+This allows for the device to use these interrupts in a sparse fashion;
+for example it could use interrupts 3 and 1027 and allocate only a
+two-element array.  The driver is expected to fill in the 'entry' value
+in each element of the array to indicate which entries it wants the kernel
+to assign interrupts for.  It is invalid to fill in two entries with the
+same number.
+
+4.3.1 pci_enable_msix
+
+int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
+
+Calling this function asks the PCI subsystem to allocate 'nvec' MSIs.
+The 'entries' argument is a pointer to an array of msix_entry structs
+which should be at least 'nvec' entries in size.  On success, the
+function will return 0 and the device will have been switched into
+MSI-X interrupt mode.  The 'vector' elements in each entry will have
+been filled in with the interrupt number.  The driver should then call
+request_irq() for each 'vector' that it decides to use.
+
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to allocate any more MSI-X interrupts for
+this device.  If it returns a positive number, it indicates the maximum
+number of interrupt vectors that could have been allocated. See example
+below.
+
+This function, in contrast with pci_enable_msi(), does not adjust
+dev->irq.  The device will not generate interrupts for this interrupt
+number once MSI-X is enabled.  The device driver is responsible for
+keeping track of the interrupts assigned to the MSI-X vectors so it can
+free them again later.
+
+Device drivers should normally call this function once per device
+during the initialization phase.
+
+It is ideal if drivers can cope with a variable number of MSI-X interrupts,
+there are many reasons why the platform may not be able to provide the
+exact number a driver asks for.
+
+A request loop to achieve that might look like:
+
+static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
+{
+	while (nvec >= FOO_DRIVER_MINIMUM_NVEC) {
+		rc = pci_enable_msix(adapter->pdev,
+				     adapter->msix_entries, nvec);
+		if (rc > 0)
+			nvec = rc;
+		else
+			return rc;
+	}
+
+	return -ENOSPC;
+}
+
+4.3.2 pci_disable_msix
 
 void pci_disable_msix(struct pci_dev *dev)
 
-This API should always be used to undo the effect of pci_enable_msix()
-when a device driver is unloading. Note that a device driver should
-always call free_irq() on all MSI-X vectors it has done request_irq()
-on before calling this API. Failure to do so results in a BUG_ON() and
-a device will be left with MSI-X enabled and leaks its vectors.
-
-5.3.4 MSI-X mode vs. legacy mode diagram
-
-The below diagram shows the events which switch the interrupt
-mode on the MSI-X capable device function between MSI-X mode and
-PIN-IRQ assertion mode (legacy).
-
-	 ------------   pci_enable_msix(,,n) ------------------------
-	|	     | <===============	    | 			     |
-	| MSI-X MODE |	  	     	    | PIN-IRQ ASSERTION MODE |
-	| 	     | ===============>	    |			     |
- 	 ------------	pci_disable_msix     ------------------------
-
-Figure 2. MSI-X Mode vs. Legacy Mode
-
-In Figure 2, a device operates by default in legacy mode. A
-successful MSI-X request (using pci_enable_msix()) switches a
-device's interrupt mode to MSI-X mode. A pre-assigned IOAPIC vector
-stored in dev->irq will be saved by the PCI subsystem; however,
-unlike MSI mode, the PCI subsystem will not replace dev->irq with
-assigned MSI-X vector because the PCI subsystem already writes the 1:1
-vector-to-entry mapping into the field 'vector' of each element
-specified in second argument.
-
-To return back to its default mode, a device driver should always call
-pci_disable_msix() to undo the effect of pci_enable_msix(). Note that
-a device driver should always call free_irq() on all MSI-X vectors it
-has done request_irq() on before calling pci_disable_msix(). Failure
-to do so results in a BUG_ON() and a device will be left with MSI-X
-enabled and leaks its vectors. Otherwise, the PCI subsystem switches a
-device function's interrupt mode from MSI-X mode to legacy mode and
-marks all allocated MSI-X vectors as unused.
-
-Once being marked as unused, there is no guarantee that the PCI
-subsystem will reserve these MSI-X vectors for a device. Depending on
-the availability of current PCI vector resources and the number of
-MSI/MSI-X requests from other drivers, these MSI-X vectors may be
-re-assigned.
-
-For the case where the PCI subsystem re-assigned these MSI-X vectors
-to other drivers, a request to switch back to MSI-X mode may result
-being assigned with another set of MSI-X vectors or a failure if no
-more vectors are available.
-
-5.4 Handling function implementing both MSI and MSI-X capabilities
-
-For the case where a function implements both MSI and MSI-X
-capabilities, the PCI subsystem enables a device to run either in MSI
-mode or MSI-X mode but not both. A device driver determines whether it
-wants MSI or MSI-X enabled on its hardware device. Once a device
-driver requests for MSI, for example, it is prohibited from requesting
-MSI-X; in other words, a device driver is not permitted to ping-pong
-between MSI mod MSI-X mode during a run-time.
-
-5.5 Hardware requirements for MSI/MSI-X support
-
-MSI/MSI-X support requires support from both system hardware and
-individual hardware device functions.
-
-5.5.1 Required x86 hardware support
-
-Since the target of MSI address is the local APIC CPU, enabling
-MSI/MSI-X support in the Linux kernel is dependent on whether existing
-system hardware supports local APIC. Users should verify that their
-system supports local APIC operation by testing that it runs when
-CONFIG_X86_LOCAL_APIC=y.
-
-In SMP environment, CONFIG_X86_LOCAL_APIC is automatically set;
-however, in UP environment, users must manually set
-CONFIG_X86_LOCAL_APIC. Once CONFIG_X86_LOCAL_APIC=y, setting
-CONFIG_PCI_MSI enables the VECTOR based scheme and the option for
-MSI-capable device drivers to selectively enable MSI/MSI-X.
-
-Note that CONFIG_X86_IO_APIC setting is irrelevant because MSI/MSI-X
-vector is allocated new during runtime and MSI/MSI-X support does not
-depend on BIOS support. This key independency enables MSI/MSI-X
-support on future IOxAPIC free platforms.
-
-5.5.2 Device hardware support
-
-The hardware device function supports MSI by indicating the
-MSI/MSI-X capability structure on its PCI capability list. By
-default, this capability structure will not be initialized by
-the kernel to enable MSI during the system boot. In other words,
-the device function is running on its default pin assertion mode.
-Note that in many cases the hardware supporting MSI have bugs,
-which may result in system hangs. The software driver of specific
-MSI-capable hardware is responsible for deciding whether to call
-pci_enable_msi or not. A return of zero indicates the kernel
-successfully initialized the MSI/MSI-X capability structure of the
-device function. The device function is now running on MSI/MSI-X mode.
-
-5.6 How to tell whether MSI/MSI-X is enabled on device function
-
-At the driver level, a return of zero from the function call of
-pci_enable_msi()/pci_enable_msix() indicates to a device driver that
-its device function is initialized successfully and ready to run in
-MSI/MSI-X mode.
-
-At the user level, users can use the command 'cat /proc/interrupts'
-to display the vectors allocated for devices and their interrupt
-MSI/MSI-X modes ("PCI-MSI"/"PCI-MSI-X"). Below shows MSI mode is
-enabled on a SCSI Adaptec 39320D Ultra320 controller.
-
-           CPU0       CPU1
-  0:     324639          0    IO-APIC-edge  timer
-  1:       1186          0    IO-APIC-edge  i8042
-  2:          0          0          XT-PIC  cascade
- 12:       2797          0    IO-APIC-edge  i8042
- 14:       6543          0    IO-APIC-edge  ide0
- 15:          1          0    IO-APIC-edge  ide1
-169:          0          0   IO-APIC-level  uhci-hcd
-185:          0          0   IO-APIC-level  uhci-hcd
-193:        138         10         PCI-MSI  aic79xx
-201:         30          0         PCI-MSI  aic79xx
-225:         30          0   IO-APIC-level  aic7xxx
-233:         30          0   IO-APIC-level  aic7xxx
-NMI:          0          0
-LOC:     324553     325068
-ERR:          0
-MIS:          0
-
-6. MSI quirks
-
-Several PCI chipsets or devices are known to not support MSI.
-The PCI stack provides 3 possible levels of MSI disabling:
-* on a single device
-* on all devices behind a specific bridge
-* globally
-
-6.1. Disabling MSI on a single device
-
-Under some circumstances it might be required to disable MSI on a
-single device.  This may be achieved by either not calling pci_enable_msi()
-or all, or setting the pci_dev->no_msi flag before (most of the time
-in a quirk).
-
-6.2. Disabling MSI below a bridge
-
-The vast majority of MSI quirks are required by PCI bridges not
-being able to route MSI between busses. In this case, MSI have to be
-disabled on all devices behind this bridge. It is achieves by setting
-the PCI_BUS_FLAGS_NO_MSI flag in the pci_bus->bus_flags of the bridge
-subordinate bus. There is no need to set the same flag on bridges that
-are below the broken bridge. When pci_enable_msi() is called to enable
-MSI on a device, pci_msi_supported() takes care of checking the NO_MSI
-flag in all parent busses of the device.
-
-Some bridges actually support dynamic MSI support enabling/disabling
-by changing some bits in their PCI configuration space (especially
-the Hypertransport chipsets such as the nVidia nForce and Serverworks
-HT2000). It may then be required to update the NO_MSI flag on the
-corresponding devices in the sysfs hierarchy. To enable MSI support
-on device "0000:00:0e", do:
-
-	echo 1 > /sys/bus/pci/devices/0000:00:0e/msi_bus
-
-To disable MSI support, echo 0 instead of 1. Note that it should be
-used with caution since changing this value might break interrupts.
-
-6.3. Disabling MSI globally
-
-Some extreme cases may require to disable MSI globally on the system.
-For now, the only known case is a Serverworks PCI-X chipsets (MSI are
-not supported on several busses that are not all connected to the
-chipset in the Linux PCI hierarchy). In the vast majority of other
-cases, disabling only behind a specific bridge is enough.
-
-For debugging purpose, the user may also pass pci=nomsi on the kernel
-command-line to explicitly disable MSI globally. But, once the appro-
-priate quirks are added to the kernel, this option should not be
-required anymore.
-
-6.4. Finding why MSI cannot be enabled on a device
-
-Assuming that MSI are not enabled on a device, you should look at
-dmesg to find messages that quirks may output when disabling MSI
-on some devices, some bridges or even globally.
-Then, lspci -t gives the list of bridges above a device. Reading
-/sys/bus/pci/devices/0000:00:0e/msi_bus will tell you whether MSI
-are enabled (1) or disabled (0). In 0 is found in a single bridge
-msi_bus file above the device, MSI cannot be enabled.
-
-7. FAQ
-
-Q1. Are there any limitations on using the MSI?
-
-A1. If the PCI device supports MSI and conforms to the
-specification and the platform supports the APIC local bus,
-then using MSI should work.
-
-Q2. Will it work on all the Pentium processors (P3, P4, Xeon,
-AMD processors)? In P3 IPI's are transmitted on the APIC local
-bus and in P4 and Xeon they are transmitted on the system
-bus. Are there any implications with this?
-
-A2. MSI support enables a PCI device sending an inbound
-memory write (0xfeexxxxx as target address) on its PCI bus
-directly to the FSB. Since the message address has a
-redirection hint bit cleared, it should work.
-
-Q3. The target address 0xfeexxxxx will be translated by the
-Host Bridge into an interrupt message. Are there any
-limitations on the chipsets such as Intel 8xx, Intel e7xxx,
-or VIA?
-
-A3. If these chipsets support an inbound memory write with
-target address set as 0xfeexxxxx, as conformed to PCI
-specification 2.3 or latest, then it should work.
-
-Q4. From the driver point of view, if the MSI is lost because
-of errors occurring during inbound memory write, then it may
-wait forever. Is there a mechanism for it to recover?
-
-A4. Since the target of the transaction is an inbound memory
-write, all transaction termination conditions (Retry,
-Master-Abort, Target-Abort, or normal completion) are
-supported. A device sending an MSI must abide by all the PCI
-rules and conditions regarding that inbound memory write. So,
-if a retry is signaled it must retry, etc... We believe that
-the recommendation for Abort is also a retry (refer to PCI
-specification 2.3 or latest).
+This API should be used to undo the effect of pci_enable_msix().  It frees
+the previously allocated message signaled interrupts.  The interrupts may
+subsequently be assigned to another device, so drivers should not cache
+the value of the 'vector' elements over a call to pci_disable_msix().
+
+A device driver must always call free_irq() on the interrupt(s)
+for which it has called request_irq() before calling this function.
+Failure to do so will result in a BUG_ON(), the device will be left with
+MSI enabled and will leak its vector.
+
+4.3.3 The MSI-X Table
+
+The MSI-X capability specifies a BAR and offset within that BAR for the
+MSI-X Table.  This address is mapped by the PCI subsystem, and should not
+be accessed directly by the device driver.  If the driver wishes to
+mask or unmask an interrupt, it should call disable_irq() / enable_irq().
+
+4.4 Handling devices implementing both MSI and MSI-X capabilities
+
+If a device implements both MSI and MSI-X capabilities, it can
+run in either MSI mode or MSI-X mode but not both simultaneously.
+This is a requirement of the PCI spec, and it is enforced by the
+PCI layer.  Calling pci_enable_msi() when MSI-X is already enabled or
+pci_enable_msix() when MSI is already enabled will result in an error.
+If a device driver wishes to switch between MSI and MSI-X at runtime,
+it must first quiesce the device, then switch it back to pin-interrupt
+mode, before calling pci_enable_msi() or pci_enable_msix() and resuming
+operation.  This is not expected to be a common operation but may be
+useful for debugging or testing during development.
+
+4.5 Considerations when using MSIs
+
+4.5.1 Choosing between MSI-X and MSI
+
+If your device supports both MSI-X and MSI capabilities, you should use
+the MSI-X facilities in preference to the MSI facilities.  As mentioned
+above, MSI-X supports any number of interrupts between 1 and 2048.
+In constrast, MSI is restricted to a maximum of 32 interrupts (and
+must be a power of two).  In addition, the MSI interrupt vectors must
+be allocated consecutively, so the system may not be able to allocate
+as many vectors for MSI as it could for MSI-X.  On some platforms, MSI
+interrupts must all be targetted at the same set of CPUs whereas MSI-X
+interrupts can all be targetted at different CPUs.
+
+4.5.2 Spinlocks
+
+Most device drivers have a per-device spinlock which is taken in the
+interrupt handler.  With pin-based interrupts or a single MSI, it is not
+necessary to disable interrupts (Linux guarantees the same interrupt will
+not be re-entered).  If a device uses multiple interrupts, the driver
+must disable interrupts while the lock is held.  If the device sends
+a different interrupt, the driver will deadlock trying to recursively
+acquire the spinlock.
+
+There are two solutions.  The first is to take the lock with
+spin_lock_irqsave() or spin_lock_irq() (see
+Documentation/DocBook/kernel-locking).  The second is to specify
+IRQF_DISABLED to request_irq() so that the kernel runs the entire
+interrupt routine with interrupts disabled.
+
+If your MSI interrupt routine does not hold the lock for the whole time
+it is running, the first solution may be best.  The second solution is
+normally preferred as it avoids making two transitions from interrupt
+disabled to enabled and back again.
+
+4.6 How to tell whether MSI/MSI-X is enabled on a device
+
+Using 'lspci -v' (as root) may show some devices with "MSI", "Message
+Signalled Interrupts" or "MSI-X" capabilities.  Each of these capabilities
+has an 'Enable' flag which will be followed with either "+" (enabled)
+or "-" (disabled).
+
+
+5. MSI quirks
+
+Several PCI chipsets or devices are known not to support MSIs.
+The PCI stack provides three ways to disable MSIs:
+
+1. globally
+2. on all devices behind a specific bridge
+3. on a single device
+
+5.1. Disabling MSIs globally
+
+Some host chipsets simply don't support MSIs properly.  If we're
+lucky, the manufacturer knows this and has indicated it in the ACPI
+FADT table.  In this case, Linux will automatically disable MSIs.
+Some boards don't include this information in the table and so we have
+to detect them ourselves.  The complete list of these is found near the
+quirk_disable_all_msi() function in drivers/pci/quirks.c.
+
+If you have a board which has problems with MSIs, you can pass pci=nomsi
+on the kernel command line to disable MSIs on all devices.  It would be
+in your best interests to report the problem to linux-pci@vger.kernel.org
+including a full 'lspci -v' so we can add the quirks to the kernel.
+
+5.2. Disabling MSIs below a bridge
+
+Some PCI bridges are not able to route MSIs between busses properly.
+In this case, MSIs must be disabled on all devices behind the bridge.
+
+Some bridges allow you to enable MSIs by changing some bits in their
+PCI configuration space (especially the Hypertransport chipsets such
+as the nVidia nForce and Serverworks HT2000).  As with host chipsets,
+Linux mostly knows about them and automatically enables MSIs if it can.
+If you have a bridge which Linux doesn't yet know about, you can enable
+MSIs in configuration space using whatever method you know works, then
+enable MSIs on that bridge by doing:
+
+       echo 1 > /sys/bus/pci/devices/$bridge/msi_bus
+
+where $bridge is the PCI address of the bridge you've enabled (eg
+0000:00:0e.0).
+
+To disable MSIs, echo 0 instead of 1.  Changing this value should be
+done with caution as it can break interrupt handling for all devices
+below this bridge.
+
+Again, please notify linux-pci@vger.kernel.org of any bridges that need
+special handling.
+
+5.3. Disabling MSIs on a single device
+
+Some devices are known to have faulty MSI implementations.  Usually this
+is handled in the individual device driver but occasionally it's necessary
+to handle this with a quirk.  Some drivers have an option to disable use
+of MSI.  While this is a convenient workaround for the driver author,
+it is not good practise, and should not be emulated.
+
+5.4. Finding why MSIs are disabled on a device
+
+From the above three sections, you can see that there are many reasons
+why MSIs may not be enabled for a given device.  Your first step should
+be to examine your dmesg carefully to determine whether MSIs are enabled
+for your machine.  You should also check your .config to be sure you
+have enabled CONFIG_PCI_MSI.
+
+Then, 'lspci -t' gives the list of bridges above a device.  Reading
+/sys/bus/pci/devices/*/msi_bus will tell you whether MSI are enabled (1)
+or disabled (0).  If 0 is found in any of the msi_bus files belonging
+to bridges between the PCI root and the device, MSIs are disabled.
+
+It is also worth checking the device driver to see whether it supports MSIs.
+For example, it may contain calls to pci_enable_msi(), pci_enable_msix() or
+pci_enable_msi_block().
diff --git a/Documentation/PCI/PCIEBUS-HOWTO.txt b/Documentation/PCI/PCIEBUS-HOWTO.txt
index 9a07e38631b..6bd5f372ade 100644
--- a/Documentation/PCI/PCIEBUS-HOWTO.txt
+++ b/Documentation/PCI/PCIEBUS-HOWTO.txt
@@ -93,7 +93,7 @@ the PCI Express Port Bus driver from loading a service driver.
 
 int pcie_port_service_register(struct pcie_port_service_driver *new)
 
-This API replaces the Linux Driver Model's pci_module_init API. A
+This API replaces the Linux Driver Model's pci_register_driver API. A
 service driver should always calls pcie_port_service_register at
 module init. Note that after service driver being loaded, calls
 such as pci_enable_device(dev) and pci_set_master(dev) are no longer
diff --git a/Documentation/PCI/pci-iov-howto.txt b/Documentation/PCI/pci-iov-howto.txt
new file mode 100644
index 00000000000..fc73ef5d65b
--- /dev/null
+++ b/Documentation/PCI/pci-iov-howto.txt
@@ -0,0 +1,99 @@
+		PCI Express I/O Virtualization Howto
+		Copyright (C) 2009 Intel Corporation
+		    Yu Zhao <yu.zhao@intel.com>
+
+
+1. Overview
+
+1.1 What is SR-IOV
+
+Single Root I/O Virtualization (SR-IOV) is a PCI Express Extended
+capability which makes one physical device appear as multiple virtual
+devices. The physical device is referred to as Physical Function (PF)
+while the virtual devices are referred to as Virtual Functions (VF).
+Allocation of the VF can be dynamically controlled by the PF via
+registers encapsulated in the capability. By default, this feature is
+not enabled and the PF behaves as traditional PCIe device. Once it's
+turned on, each VF's PCI configuration space can be accessed by its own
+Bus, Device and Function Number (Routing ID). And each VF also has PCI
+Memory Space, which is used to map its register set. VF device driver
+operates on the register set so it can be functional and appear as a
+real existing PCI device.
+
+2. User Guide
+
+2.1 How can I enable SR-IOV capability
+
+The device driver (PF driver) will control the enabling and disabling
+of the capability via API provided by SR-IOV core. If the hardware
+has SR-IOV capability, loading its PF driver would enable it and all
+VFs associated with the PF.
+
+2.2 How can I use the Virtual Functions
+
+The VF is treated as hot-plugged PCI devices in the kernel, so they
+should be able to work in the same way as real PCI devices. The VF
+requires device driver that is same as a normal PCI device's.
+
+3. Developer Guide
+
+3.1 SR-IOV API
+
+To enable SR-IOV capability:
+	int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn);
+	'nr_virtfn' is number of VFs to be enabled.
+
+To disable SR-IOV capability:
+	void pci_disable_sriov(struct pci_dev *dev);
+
+To notify SR-IOV core of Virtual Function Migration:
+	irqreturn_t pci_sriov_migration(struct pci_dev *dev);
+
+3.2 Usage example
+
+Following piece of code illustrates the usage of the SR-IOV API.
+
+static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	pci_enable_sriov(dev, NR_VIRTFN);
+
+	...
+
+	return 0;
+}
+
+static void __devexit dev_remove(struct pci_dev *dev)
+{
+	pci_disable_sriov(dev);
+
+	...
+}
+
+static int dev_suspend(struct pci_dev *dev, pm_message_t state)
+{
+	...
+
+	return 0;
+}
+
+static int dev_resume(struct pci_dev *dev)
+{
+	...
+
+	return 0;
+}
+
+static void dev_shutdown(struct pci_dev *dev)
+{
+	...
+}
+
+static struct pci_driver dev_driver = {
+	.name =		"SR-IOV Physical Function driver",
+	.id_table =	dev_id_table,
+	.probe =	dev_probe,
+	.remove =	__devexit_p(dev_remove),
+	.suspend =	dev_suspend,
+	.resume =	dev_resume,
+	.shutdown =	dev_shutdown,
+};
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt
index 6e253407b3d..accfe2f5247 100644
--- a/Documentation/RCU/checklist.txt
+++ b/Documentation/RCU/checklist.txt
@@ -298,3 +298,15 @@ over a rather long period of time, but improvements are always welcome!
 
 	Note that, rcu_assign_pointer() and rcu_dereference() relate to
 	SRCU just as they do to other forms of RCU.
+
+15.	The whole point of call_rcu(), synchronize_rcu(), and friends
+	is to wait until all pre-existing readers have finished before
+	carrying out some otherwise-destructive operation.  It is
+	therefore critically important to -first- remove any path
+	that readers can follow that could be affected by the
+	destructive operation, and -only- -then- invoke call_rcu(),
+	synchronize_rcu(), or friends.
+
+	Because these primitives only wait for pre-existing readers,
+	it is the caller's responsibility to guarantee safety to
+	any subsequent readers.
diff --git a/Documentation/RCU/listRCU.txt b/Documentation/RCU/listRCU.txt
index 1fd175368a8..4349c1487e9 100644
--- a/Documentation/RCU/listRCU.txt
+++ b/Documentation/RCU/listRCU.txt
@@ -118,7 +118,7 @@ Following are the RCU equivalents for these two functions:
 		list_for_each_entry(e, list, list) {
 			if (!audit_compare_rule(rule, &e->rule)) {
 				list_del_rcu(&e->list);
-				call_rcu(&e->rcu, audit_free_rule, e);
+				call_rcu(&e->rcu, audit_free_rule);
 				return 0;
 			}
 		}
@@ -206,7 +206,7 @@ RCU ("read-copy update") its name.  The RCU code is as follows:
 				ne->rule.action = newaction;
 				ne->rule.file_count = newfield_count;
 				list_replace_rcu(e, ne);
-				call_rcu(&e->rcu, audit_free_rule, e);
+				call_rcu(&e->rcu, audit_free_rule);
 				return 0;
 			}
 		}
@@ -283,7 +283,7 @@ flag under the spinlock as follows:
 				list_del_rcu(&e->list);
 				e->deleted = 1;
 				spin_unlock(&e->lock);
-				call_rcu(&e->rcu, audit_free_rule, e);
+				call_rcu(&e->rcu, audit_free_rule);
 				return 0;
 			}
 		}
diff --git a/Documentation/RCU/rcu.txt b/Documentation/RCU/rcu.txt
index 95821a29ae4..7aa2002ade7 100644
--- a/Documentation/RCU/rcu.txt
+++ b/Documentation/RCU/rcu.txt
@@ -81,7 +81,7 @@ o	I hear that RCU needs work in order to support realtime kernels?
 	This work is largely completed.  Realtime-friendly RCU can be
 	enabled via the CONFIG_PREEMPT_RCU kernel configuration parameter.
 	However, work is in progress for enabling priority boosting of
-	preempted RCU read-side critical sections.This is needed if you
+	preempted RCU read-side critical sections.  This is needed if you
 	have CPU-bound realtime threads.
 
 o	Where can I find more information on RCU?
diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt
index 239f542d48b..6389dec3345 100644
--- a/Documentation/RCU/rculist_nulls.txt
+++ b/Documentation/RCU/rculist_nulls.txt
@@ -21,7 +21,7 @@ if (obj) {
   /*
    * Because a writer could delete object, and a writer could
    * reuse these object before the RCU grace period, we
-   * must check key after geting the reference on object
+   * must check key after getting the reference on object
    */
   if (obj->key != key) { // not the object we expected
      put_ref(obj);
@@ -117,7 +117,7 @@ a race (some writer did a delete and/or a move of an object
 to another chain) checking the final 'nulls' value if
 the lookup met the end of chain. If final 'nulls' value
 is not the slot number, then we must restart the lookup at
-the begining. If the object was moved to same chain,
+the beginning. If the object was moved to the same chain,
 then the reader doesnt care : It might eventually
 scan the list again without harm.
 
diff --git a/Documentation/Smack.txt b/Documentation/Smack.txt
index 989c2fcd811..629c92e9978 100644
--- a/Documentation/Smack.txt
+++ b/Documentation/Smack.txt
@@ -184,14 +184,16 @@ length. Single character labels using special characters, that being anything
 other than a letter or digit, are reserved for use by the Smack development
 team. Smack labels are unstructured, case sensitive, and the only operation
 ever performed on them is comparison for equality. Smack labels cannot
-contain unprintable characters or the "/" (slash) character.
+contain unprintable characters or the "/" (slash) character. Smack labels
+cannot begin with a '-', which is reserved for special options.
 
 There are some predefined labels:
 
-	_ Pronounced "floor", a single underscore character.
-	^ Pronounced "hat", a single circumflex character.
-	* Pronounced "star", a single asterisk character.
-	? Pronounced "huh", a single question mark character.
+	_ 	Pronounced "floor", a single underscore character.
+	^ 	Pronounced "hat", a single circumflex character.
+	* 	Pronounced "star", a single asterisk character.
+	? 	Pronounced "huh", a single question mark character.
+	@ 	Pronounced "Internet", a single at sign character.
 
 Every task on a Smack system is assigned a label. System tasks, such as
 init(8) and systems daemons, are run with the floor ("_") label. User tasks
@@ -412,6 +414,36 @@ sockets.
 	A privileged program may set this to match the label of another
 	task with which it hopes to communicate.
 
+Smack Netlabel Exceptions
+
+You will often find that your labeled application has to talk to the outside,
+unlabeled world. To do this there's a special file /smack/netlabel where you can
+add some exceptions in the form of :
+@IP1	   LABEL1 or
+@IP2/MASK  LABEL2
+
+It means that your application will have unlabeled access to @IP1 if it has
+write access on LABEL1, and access to the subnet @IP2/MASK if it has write
+access on LABEL2.
+
+Entries in the /smack/netlabel file are matched by longest mask first, like in
+classless IPv4 routing.
+
+A special label '@' and an option '-CIPSO' can be used there :
+@      means Internet, any application with any label has access to it
+-CIPSO means standard CIPSO networking
+
+If you don't know what CIPSO is and don't plan to use it, you can just do :
+echo 127.0.0.1 -CIPSO > /smack/netlabel
+echo 0.0.0.0/0 @      > /smack/netlabel
+
+If you use CIPSO on your 192.168.0.0/16 local network and need also unlabeled
+Internet access, you can have :
+echo 127.0.0.1      -CIPSO > /smack/netlabel
+echo 192.168.0.0/16 -CIPSO > /smack/netlabel
+echo 0.0.0.0/0      @      > /smack/netlabel
+
+
 Writing Applications for Smack
 
 There are three sorts of applications that will run on a Smack system. How an
diff --git a/Documentation/arm/Samsung-S3C24XX/Suspend.txt b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
index 0dab6e32c13..a30fe510572 100644
--- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
@@ -40,13 +40,13 @@ Resuming
 Machine Support
 ---------------
 
-  The machine specific functions must call the s3c2410_pm_init() function
+  The machine specific functions must call the s3c_pm_init() function
   to say that its bootloader is capable of resuming. This can be as
   simple as adding the following to the machine's definition:
 
-  INITMACHINE(s3c2410_pm_init)
+  INITMACHINE(s3c_pm_init)
 
-  A board can do its own setup before calling s3c2410_pm_init, if it
+  A board can do its own setup before calling s3c_pm_init, if it
   needs to setup anything else for power management support.
 
   There is currently no support for over-riding the default method of
@@ -74,7 +74,7 @@ statuc void __init machine_init(void)
 
 	enable_irq_wake(IRQ_EINT0);
 
-	s3c2410_pm_init();
+	s3c_pm_init();
 }
 
 
diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt
index dc6045577a8..43cb1004d35 100644
--- a/Documentation/arm/memory.txt
+++ b/Documentation/arm/memory.txt
@@ -29,7 +29,14 @@ ffff0000	ffff0fff	CPU vector page.
 				CPU supports vector relocation (control
 				register V bit.)
 
-ffc00000	fffeffff	DMA memory mapping region.  Memory returned
+fffe0000	fffeffff	XScale cache flush area.  This is used
+				in proc-xscale.S to flush the whole data
+				cache.  Free for other usage on non-XScale.
+
+fff00000	fffdffff	Fixmap mapping region.  Addresses provided
+				by fix_to_virt() will be located here.
+
+ffc00000	ffefffff	DMA memory mapping region.  Memory returned
 				by the dma_alloc_xxx functions will be
 				dynamically mapped here.
 
diff --git a/Documentation/block/switching-sched.txt b/Documentation/block/switching-sched.txt
index 634c952e196..d5af3f63081 100644
--- a/Documentation/block/switching-sched.txt
+++ b/Documentation/block/switching-sched.txt
@@ -35,9 +35,3 @@ noop anticipatory deadline [cfq]
 # echo anticipatory > /sys/block/hda/queue/scheduler
 # cat /sys/block/hda/queue/scheduler
 noop [anticipatory] deadline cfq
-
-Each io queue has a set of io scheduler tunables associated with it. These
-tunables control how the io scheduler works. You can find these entries
-in:
-
-/sys/block/<device>/queue/iosched
diff --git a/Documentation/blockdev/00-INDEX b/Documentation/blockdev/00-INDEX
index 86f054c4701..c08df56dd91 100644
--- a/Documentation/blockdev/00-INDEX
+++ b/Documentation/blockdev/00-INDEX
@@ -8,6 +8,8 @@ cpqarray.txt
 	- info on using Compaq's SMART2 Intelligent Disk Array Controllers.
 floppy.txt
 	- notes and driver options for the floppy disk driver.
+mflash.txt
+	- info on mGine m(g)flash driver for linux.
 nbd.txt
 	- info on a TCP implementation of a network block device.
 paride.txt
diff --git a/Documentation/blockdev/mflash.txt b/Documentation/blockdev/mflash.txt
new file mode 100644
index 00000000000..1f610ecf698
--- /dev/null
+++ b/Documentation/blockdev/mflash.txt
@@ -0,0 +1,84 @@
+This document describes m[g]flash support in linux.
+
+Contents
+  1. Overview
+  2. Reserved area configuration
+  3. Example of mflash platform driver registration
+
+1. Overview
+
+Mflash and gflash are embedded flash drive. The only difference is mflash is
+MCP(Multi Chip Package) device. These two device operate exactly same way.
+So the rest mflash repersents mflash and gflash altogether.
+
+Internally, mflash has nand flash and other hardware logics and supports
+2 different operation (ATA, IO) modes. ATA mode doesn't need any new
+driver and currently works well under standard IDE subsystem. Actually it's
+one chip SSD. IO mode is ATA-like custom mode for the host that doesn't have
+IDE interface.
+
+Followings are brief descriptions about IO mode.
+A. IO mode based on ATA protocol and uses some custom command. (read confirm,
+write confirm)
+B. IO mode uses SRAM bus interface.
+C. IO mode supports 4kB boot area, so host can boot from mflash.
+
+2. Reserved area configuration
+If host boot from mflash, usually needs raw area for boot loader image. All of
+the mflash's block device operation will be taken this value as start offset.
+Note that boot loader's size of reserved area and kernel configuration value
+must be same.
+
+3. Example of mflash platform driver registration
+Working mflash is very straight forward. Adding platform device stuff to board
+configuration file is all. Here is some pseudo example.
+
+static struct mg_drv_data mflash_drv_data = {
+	/* If you want to polling driver set to 1 */
+	.use_polling = 0,
+	/* device attribution */
+	.dev_attr = MG_BOOT_DEV
+};
+
+static struct resource mg_mflash_rsc[] = {
+	/* Base address of mflash */
+	[0] = {
+		.start = 0x08000000,
+		.end = 0x08000000 + SZ_64K - 1,
+		.flags = IORESOURCE_MEM
+	},
+	/* mflash interrupt pin */
+	[1] = {
+		.start = IRQ_GPIO(84),
+		.end = IRQ_GPIO(84),
+		.flags = IORESOURCE_IRQ
+	},
+	/* mflash reset pin */
+	[2] = {
+		.start = 43,
+		.end = 43,
+		.name = MG_RST_PIN,
+		.flags = IORESOURCE_IO
+	},
+	/* mflash reset-out pin
+	 * If you use mflash as storage device (i.e. other than MG_BOOT_DEV),
+	 * should assign this */
+	[3] = {
+		.start = 51,
+		.end = 51,
+		.name = MG_RSTOUT_PIN,
+		.flags = IORESOURCE_IO
+	}
+};
+
+static struct platform_device mflash_dev = {
+	.name = MG_DEV_NAME,
+	.id = -1,
+	.dev = {
+		.platform_data = &mflash_drv_data,
+	},
+	.num_resources = ARRAY_SIZE(mg_mflash_rsc),
+	.resource = mg_mflash_rsc
+};
+
+platform_device_register(&mflash_dev);
diff --git a/Documentation/cgroups/00-INDEX b/Documentation/cgroups/00-INDEX
new file mode 100644
index 00000000000..3f58fa3d6d0
--- /dev/null
+++ b/Documentation/cgroups/00-INDEX
@@ -0,0 +1,18 @@
+00-INDEX
+	- this file
+cgroups.txt
+	- Control Groups definition, implementation details, examples and API.
+cpuacct.txt
+	- CPU Accounting Controller; account CPU usage for groups of tasks.
+cpusets.txt
+	- documents the cpusets feature; assign CPUs and Mem to a set of tasks.
+devices.txt
+	- Device Whitelist Controller; description, interface and security.
+freezer-subsystem.txt
+	- checkpointing; rationale to not use signals, interface.
+memcg_test.txt
+	- Memory Resource Controller; implementation details.
+memory.txt
+	- Memory Resource Controller; design, accounting, interface, testing.
+resource_counter.txt
+	- Resource Counter API.
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index d9e5d6f41b9..6eb1a97e88c 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -56,7 +56,7 @@ hierarchy, and a set of subsystems; each subsystem has system-specific
 state attached to each cgroup in the hierarchy.  Each hierarchy has
 an instance of the cgroup virtual filesystem associated with it.
 
-At any one time there may be multiple active hierachies of task
+At any one time there may be multiple active hierarchies of task
 cgroups. Each hierarchy is a partition of all tasks in the system.
 
 User level code may create and destroy cgroups by name in an
@@ -124,10 +124,10 @@ following lines:
                                / \
                        Prof (15%) students (5%)
 
-Browsers like firefox/lynx go into the WWW network class, while (k)nfsd go
+Browsers like Firefox/Lynx go into the WWW network class, while (k)nfsd go
 into NFS network class.
 
-At the same time firefox/lynx will share an appropriate CPU/Memory class
+At the same time Firefox/Lynx will share an appropriate CPU/Memory class
 depending on who launched it (prof/student).
 
 With the ability to classify tasks differently for different resources
@@ -252,10 +252,8 @@ cgroup file system directories.
 When a task is moved from one cgroup to another, it gets a new
 css_set pointer - if there's an already existing css_set with the
 desired collection of cgroups then that group is reused, else a new
-css_set is allocated. Note that the current implementation uses a
-linear search to locate an appropriate existing css_set, so isn't
-very efficient. A future version will use a hash table for better
-performance.
+css_set is allocated. The appropriate existing css_set is located by
+looking into a hash table.
 
 To allow access from a cgroup to the css_sets (and hence tasks)
 that comprise it, a set of cg_cgroup_link objects form a lattice;
@@ -327,7 +325,7 @@ and then start a subshell 'sh' in that cgroup:
 Creating, modifying, using the cgroups can be done through the cgroup
 virtual filesystem.
 
-To mount a cgroup hierarchy will all available subsystems, type:
+To mount a cgroup hierarchy with all available subsystems, type:
 # mount -t cgroup xxx /dev/cgroup
 
 The "xxx" is not interpreted by the cgroup code, but will appear in
@@ -335,12 +333,23 @@ The "xxx" is not interpreted by the cgroup code, but will appear in
 
 To mount a cgroup hierarchy with just the cpuset and numtasks
 subsystems, type:
-# mount -t cgroup -o cpuset,numtasks hier1 /dev/cgroup
+# mount -t cgroup -o cpuset,memory hier1 /dev/cgroup
 
 To change the set of subsystems bound to a mounted hierarchy, just
 remount with different options:
+# mount -o remount,cpuset,ns hier1 /dev/cgroup
 
-# mount -o remount,cpuset,ns  /dev/cgroup
+Now memory is removed from the hierarchy and ns is added.
+
+Note this will add ns to the hierarchy but won't remove memory or
+cpuset, because the new options are appended to the old ones:
+# mount -o remount,ns /dev/cgroup
+
+To Specify a hierarchy's release_agent:
+# mount -t cgroup -o cpuset,release_agent="/sbin/cpuset_release_agent" \
+  xxx /dev/cgroup
+
+Note that specifying 'release_agent' more than once will return failure.
 
 Note that changing the set of subsystems is currently only supported
 when the hierarchy consists of a single (root) cgroup. Supporting
@@ -351,6 +360,11 @@ Then under /dev/cgroup you can find a tree that corresponds to the
 tree of the cgroups in the system. For instance, /dev/cgroup
 is the cgroup that holds the whole system.
 
+If you want to change the value of release_agent:
+# echo "/sbin/new_release_agent" > /dev/cgroup/release_agent
+
+It can also be changed via remount.
+
 If you want to create a new cgroup under /dev/cgroup:
 # cd /dev/cgroup
 # mkdir my_cgroup
@@ -478,11 +492,13 @@ cgroup->parent is still valid. (Note - can also be called for a
 newly-created cgroup if an error occurs after this subsystem's
 create() method has been called for the new cgroup).
 
-void pre_destroy(struct cgroup_subsys *ss, struct cgroup *cgrp);
+int pre_destroy(struct cgroup_subsys *ss, struct cgroup *cgrp);
 
 Called before checking the reference count on each subsystem. This may
 be useful for subsystems which have some extra references even if
-there are not tasks in the cgroup.
+there are not tasks in the cgroup. If pre_destroy() returns error code,
+rmdir() will fail with it. From this behavior, pre_destroy() can be
+called multiple times against a cgroup.
 
 int can_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
 	       struct task_struct *task)
@@ -523,7 +539,7 @@ always handled well.
 void post_clone(struct cgroup_subsys *ss, struct cgroup *cgrp)
 (cgroup_mutex held by caller)
 
-Called at the end of cgroup_clone() to do any paramater
+Called at the end of cgroup_clone() to do any parameter
 initialization which might be required before a task could attach.  For
 example in cpusets, no task may attach before 'cpus' and 'mems' are set
 up.
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index 5c86c258c79..f9ca389dddf 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -131,7 +131,7 @@ Cpusets extends these two mechanisms as follows:
  - The hierarchy of cpusets can be mounted at /dev/cpuset, for
    browsing and manipulation from user space.
  - A cpuset may be marked exclusive, which ensures that no other
-   cpuset (except direct ancestors and descendents) may contain
+   cpuset (except direct ancestors and descendants) may contain
    any overlapping CPUs or Memory Nodes.
  - You can list all the tasks (by pid) attached to any cpuset.
 
@@ -142,7 +142,7 @@ into the rest of the kernel, none in performance critical paths:
  - in fork and exit, to attach and detach a task from its cpuset.
  - in sched_setaffinity, to mask the requested CPUs by what's
    allowed in that tasks cpuset.
- - in sched.c migrate_all_tasks(), to keep migrating tasks within
+ - in sched.c migrate_live_tasks(), to keep migrating tasks within
    the CPUs allowed by their cpuset, if possible.
  - in the mbind and set_mempolicy system calls, to mask the requested
    Memory Nodes by what's allowed in that tasks cpuset.
@@ -175,6 +175,10 @@ files describing that cpuset:
  - mem_exclusive flag: is memory placement exclusive?
  - mem_hardwall flag:  is memory allocation hardwalled
  - memory_pressure: measure of how much paging pressure in cpuset
+ - memory_spread_page flag: if set, spread page cache evenly on allowed nodes
+ - memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
+ - sched_load_balance flag: if set, load balance within CPUs on that cpuset
+ - sched_relax_domain_level: the searching range when migrating tasks
 
 In addition, the root cpuset only has the following file:
  - memory_pressure_enabled flag: compute memory_pressure?
@@ -222,7 +226,7 @@ nodes with memory--using the cpuset_track_online_nodes() hook.
 --------------------------------
 
 If a cpuset is cpu or mem exclusive, no other cpuset, other than
-a direct ancestor or descendent, may share any of the same CPUs or
+a direct ancestor or descendant, may share any of the same CPUs or
 Memory Nodes.
 
 A cpuset that is mem_exclusive *or* mem_hardwall is "hardwalled",
@@ -252,7 +256,7 @@ is causing.
 
 This is useful both on tightly managed systems running a wide mix of
 submitted jobs, which may choose to terminate or re-prioritize jobs that
-are trying to use more memory than allowed on the nodes assigned them,
+are trying to use more memory than allowed on the nodes assigned to them,
 and with tightly coupled, long running, massively parallel scientific
 computing jobs that will dramatically fail to meet required performance
 goals if they start to use more memory than allowed to them.
@@ -378,7 +382,7 @@ as cpusets and sched_setaffinity.
 The algorithmic cost of load balancing and its impact on key shared
 kernel data structures such as the task list increases more than
 linearly with the number of CPUs being balanced.  So the scheduler
-has support to  partition the systems CPUs into a number of sched
+has support to partition the systems CPUs into a number of sched
 domains such that it only load balances within each sched domain.
 Each sched domain covers some subset of the CPUs in the system;
 no two sched domains overlap; some CPUs might not be in any sched
@@ -423,7 +427,7 @@ child cpusets have this flag enabled.
 When doing this, you don't usually want to leave any unpinned tasks in
 the top cpuset that might use non-trivial amounts of CPU, as such tasks
 may be artificially constrained to some subset of CPUs, depending on
-the particulars of this flag setting in descendent cpusets.  Even if
+the particulars of this flag setting in descendant cpusets.  Even if
 such a task could use spare CPU cycles in some other CPUs, the kernel
 scheduler might not consider the possibility of load balancing that
 task to that underused CPU.
@@ -485,17 +489,22 @@ of CPUs allowed to a cpuset having 'sched_load_balance' enabled.
 The internal kernel cpuset to scheduler interface passes from the
 cpuset code to the scheduler code a partition of the load balanced
 CPUs in the system. This partition is a set of subsets (represented
-as an array of cpumask_t) of CPUs, pairwise disjoint, that cover all
-the CPUs that must be load balanced.
-
-Whenever the 'sched_load_balance' flag changes, or CPUs come or go
-from a cpuset with this flag enabled, or a cpuset with this flag
-enabled is removed, the cpuset code builds a new such partition and
-passes it to the scheduler sched domain setup code, to have the sched
-domains rebuilt as necessary.
+as an array of struct cpumask) of CPUs, pairwise disjoint, that cover
+all the CPUs that must be load balanced.
+
+The cpuset code builds a new such partition and passes it to the
+scheduler sched domain setup code, to have the sched domains rebuilt
+as necessary, whenever:
+ - the 'sched_load_balance' flag of a cpuset with non-empty CPUs changes,
+ - or CPUs come or go from a cpuset with this flag enabled,
+ - or 'sched_relax_domain_level' value of a cpuset with non-empty CPUs
+   and with this flag enabled changes,
+ - or a cpuset with non-empty CPUs and with this flag enabled is removed,
+ - or a cpu is offlined/onlined.
 
 This partition exactly defines what sched domains the scheduler should
-setup - one sched domain for each element (cpumask_t) in the partition.
+setup - one sched domain for each element (struct cpumask) in the
+partition.
 
 The scheduler remembers the currently active sched domain partitions.
 When the scheduler routine partition_sched_domains() is invoked from
@@ -522,9 +531,9 @@ be idle.
 
 Of course it takes some searching cost to find movable tasks and/or
 idle CPUs, the scheduler might not search all CPUs in the domain
-everytime.  In fact, in some architectures, the searching ranges on
+every time.  In fact, in some architectures, the searching ranges on
 events are limited in the same socket or node where the CPU locates,
-while the load balance on tick searchs all.
+while the load balance on tick searches all.
 
 For example, assume CPU Z is relatively far from CPU X.  Even if CPU Z
 is idle while CPU X and the siblings are busy, scheduler can't migrate
@@ -559,7 +568,7 @@ domain, the largest value among those is used.  Be careful, if one
 requests 0 and others are -1 then 0 is used.
 
 Note that modifying this file will have both good and bad effects,
-and whether it is acceptable or not will be depend on your situation.
+and whether it is acceptable or not depends on your situation.
 Don't modify this file if you are not sure.
 
 If your situation is:
@@ -592,7 +601,7 @@ its new cpuset, then the task will continue to use whatever subset
 of MPOL_BIND nodes are still allowed in the new cpuset.  If the task
 was using MPOL_BIND and now none of its MPOL_BIND nodes are allowed
 in the new cpuset, then the task will be essentially treated as if it
-was MPOL_BIND bound to the new cpuset (even though its numa placement,
+was MPOL_BIND bound to the new cpuset (even though its NUMA placement,
 as queried by get_mempolicy(), doesn't change).  If a task is moved
 from one cpuset to another, then the kernel will adjust the tasks
 memory placement, as above, the next time that the kernel attempts
@@ -600,19 +609,15 @@ to allocate a page of memory for that task.
 
 If a cpuset has its 'cpus' modified, then each task in that cpuset
 will have its allowed CPU placement changed immediately.  Similarly,
-if a tasks pid is written to a cpusets 'tasks' file, in either its
-current cpuset or another cpuset, then its allowed CPU placement is
-changed immediately.  If such a task had been bound to some subset
-of its cpuset using the sched_setaffinity() call, the task will be
-allowed to run on any CPU allowed in its new cpuset, negating the
-affect of the prior sched_setaffinity() call.
+if a tasks pid is written to another cpusets 'tasks' file, then its
+allowed CPU placement is changed immediately.  If such a task had been
+bound to some subset of its cpuset using the sched_setaffinity() call,
+the task will be allowed to run on any CPU allowed in its new cpuset,
+negating the effect of the prior sched_setaffinity() call.
 
 In summary, the memory placement of a task whose cpuset is changed is
 updated by the kernel, on the next allocation of a page for that task,
-but the processor placement is not updated, until that tasks pid is
-rewritten to the 'tasks' file of its cpuset.  This is done to avoid
-impacting the scheduler code in the kernel with a check for changes
-in a tasks processor placement.
+and the processor placement is updated immediately.
 
 Normally, once a page is allocated (given a physical page
 of main memory) then that page stays on whatever node it
@@ -681,10 +686,14 @@ and then start a subshell 'sh' in that cpuset:
   # The next line should display '/Charlie'
   cat /proc/self/cpuset
 
-In the future, a C library interface to cpusets will likely be
-available.  For now, the only way to query or modify cpusets is
-via the cpuset file system, using the various cd, mkdir, echo, cat,
-rmdir commands from the shell, or their equivalent from C.
+There are ways to query or modify cpusets:
+ - via the cpuset file system directly, using the various cd, mkdir, echo,
+   cat, rmdir commands from the shell, or their equivalent from C.
+ - via the C library libcpuset.
+ - via the C library libcgroup.
+   (http://sourceforge.net/proects/libcg/)
+ - via the python application cset.
+   (http://developer.novell.com/wiki/index.php/Cpuset)
 
 The sched_setaffinity calls can also be done at the shell prompt using
 SGI's runon or Robert Love's taskset.  The mbind and set_mempolicy
@@ -756,7 +765,7 @@ mount -t cpuset X /dev/cpuset
 
 is equivalent to
 
-mount -t cgroup -ocpuset X /dev/cpuset
+mount -t cgroup -ocpuset,noprefix X /dev/cpuset
 echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
 
 2.2 Adding/removing cpus
diff --git a/Documentation/cgroups/devices.txt b/Documentation/cgroups/devices.txt
index 7cc6e6a6067..57ca4c89fe5 100644
--- a/Documentation/cgroups/devices.txt
+++ b/Documentation/cgroups/devices.txt
@@ -42,7 +42,7 @@ suffice, but we can decide the best way to adequately restrict
 movement as people get some experience with this.  We may just want
 to require CAP_SYS_ADMIN, which at least is a separate bit from
 CAP_MKNOD.  We may want to just refuse moving to a cgroup which
-isn't a descendent of the current one.  Or we may want to use
+isn't a descendant of the current one.  Or we may want to use
 CAP_MAC_ADMIN, since we really are trying to lock down root.
 
 CAP_SYS_ADMIN is needed to modify the whitelist or move another
diff --git a/Documentation/cgroups/memcg_test.txt b/Documentation/cgroups/memcg_test.txt
index 523a9c16c40..72db89ed060 100644
--- a/Documentation/cgroups/memcg_test.txt
+++ b/Documentation/cgroups/memcg_test.txt
@@ -1,5 +1,5 @@
 Memory Resource Controller(Memcg)  Implementation Memo.
-Last Updated: 2009/1/19
+Last Updated: 2009/1/20
 Base Kernel Version: based on 2.6.29-rc2.
 
 Because VM is getting complex (one of reasons is memcg...), memcg's behavior
@@ -356,7 +356,25 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 	(Shell-B)
 	# move all tasks in /cgroup/test to /cgroup
 	# /sbin/swapoff -a
-	# rmdir /test/cgroup
+	# rmdir /cgroup/test
 	# kill malloc task.
 
 	Of course, tmpfs v.s. swapoff test should be tested, too.
+
+ 9.8 OOM-Killer
+	Out-of-memory caused by memcg's limit will kill tasks under
+	the memcg. When hierarchy is used, a task under hierarchy
+	will be killed by the kernel.
+	In this case, panic_on_oom shouldn't be invoked and tasks
+	in other groups shouldn't be killed.
+
+	It's not difficult to cause OOM under memcg as following.
+	Case A) when you can swapoff
+	#swapoff -a
+	#echo 50M > /memory.limit_in_bytes
+	run 51M of malloc
+
+	Case B) when you use mem+swap limitation.
+	#echo 50M > memory.limit_in_bytes
+	#echo 50M > memory.memsw.limit_in_bytes
+	run 51M of malloc
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index e1501964df1..a98a7fe7aab 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -302,7 +302,7 @@ will be charged as a new owner of it.
 	unevictable		- # of pages cannot be reclaimed.(mlocked etc)
 
 	Below is depend on CONFIG_DEBUG_VM.
-	inactive_ratio		- VM inernal parameter. (see mm/page_alloc.c)
+	inactive_ratio		- VM internal parameter. (see mm/page_alloc.c)
 	recent_rotated_anon	- VM internal parameter. (see mm/vmscan.c)
 	recent_rotated_file	- VM internal parameter. (see mm/vmscan.c)
 	recent_scanned_anon 	- VM internal parameter. (see mm/vmscan.c)
diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c
index be7af146dd3..6977c178729 100644
--- a/Documentation/connector/cn_test.c
+++ b/Documentation/connector/cn_test.c
@@ -137,7 +137,7 @@ static void cn_test_timer_func(unsigned long __data)
 
 		memcpy(m + 1, data, m->len);
 
-		cn_netlink_send(m, 0, gfp_any());
+		cn_netlink_send(m, 0, GFP_ATOMIC);
 		kfree(m);
 	}
 
@@ -160,10 +160,8 @@ static int cn_test_init(void)
 		goto err_out;
 	}
 
-	init_timer(&cn_test_timer);
-	cn_test_timer.function = cn_test_timer_func;
+	setup_timer(&cn_test_timer, cn_test_timer_func, 0);
 	cn_test_timer.expires = jiffies + HZ;
-	cn_test_timer.data = 0;
 	add_timer(&cn_test_timer);
 
 	return 0;
diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt
index 5b0cfa67aff..ce73f3eb5dd 100644
--- a/Documentation/cpu-freq/governors.txt
+++ b/Documentation/cpu-freq/governors.txt
@@ -117,10 +117,28 @@ accessible parameters:
 sampling_rate: measured in uS (10^-6 seconds), this is how often you
 want the kernel to look at the CPU usage and to make decisions on
 what to do about the frequency.  Typically this is set to values of
-around '10000' or more.
-
-show_sampling_rate_(min|max): the minimum and maximum sampling rates
-available that you may set 'sampling_rate' to.
+around '10000' or more. It's default value is (cmp. with users-guide.txt):
+transition_latency * 1000
+The lowest value you can set is:
+transition_latency * 100 or it may get restricted to a value where it
+makes not sense for the kernel anymore to poll that often which depends
+on your HZ config variable (HZ=1000: max=20000us, HZ=250: max=5000).
+Be aware that transition latency is in ns and sampling_rate is in us, so you
+get the same sysfs value by default.
+Sampling rate should always get adjusted considering the transition latency
+To set the sampling rate 750 times as high as the transition latency
+in the bash (as said, 1000 is default), do:
+echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) \
+    >ondemand/sampling_rate
+
+show_sampling_rate_(min|max): THIS INTERFACE IS DEPRECATED, DON'T USE IT.
+You can use wider ranges now and the general
+cpuinfo_transition_latency variable (cmp. with user-guide.txt) can be
+used to obtain exactly the same info:
+show_sampling_rate_min = transtition_latency * 500    / 1000
+show_sampling_rate_max = transtition_latency * 500000 / 1000
+(divided by 1000 is to illustrate that sampling rate is in us and
+transition latency is exported ns).
 
 up_threshold: defines what the average CPU usage between the samplings
 of 'sampling_rate' needs to be for the kernel to make a decision on
diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt
index e3443ddcfb8..75f41193f3e 100644
--- a/Documentation/cpu-freq/user-guide.txt
+++ b/Documentation/cpu-freq/user-guide.txt
@@ -152,6 +152,18 @@ cpuinfo_min_freq :		this file shows the minimum operating
 				frequency the processor can run at(in kHz) 
 cpuinfo_max_freq :		this file shows the maximum operating
 				frequency the processor can run at(in kHz) 
+cpuinfo_transition_latency	The time it takes on this CPU to
+				switch between two frequencies in nano
+				seconds. If unknown or known to be
+				that high that the driver does not
+				work with the ondemand governor, -1
+				(CPUFREQ_ETERNAL) will be returned.
+				Using this information can be useful
+				to choose an appropriate polling
+				frequency for a kernel governor or
+				userspace daemon. Make sure to not
+				switch the frequency too often
+				resulting in performance loss.
 scaling_driver :		this file shows what cpufreq driver is
 				used to set the frequency on this CPU
 
@@ -195,19 +207,3 @@ scaling_setspeed.		By "echoing" a new frequency into this
 				you can change the speed of the CPU,
 				but only within the limits of
 				scaling_min_freq and scaling_max_freq.
-				
-
-3.2 Deprecated Interfaces
--------------------------
-
-Depending on your kernel configuration, you might find the following 
-cpufreq-related files:
-/proc/cpufreq
-/proc/sys/cpu/*/speed
-/proc/sys/cpu/*/speed-min
-/proc/sys/cpu/*/speed-max
-
-These are files for deprecated interfaces to cpufreq, which offer far
-less functionality. Because of this, these interfaces aren't described
-here.
-
diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt
index 45932ec21ce..b41f3e58aef 100644
--- a/Documentation/cputopology.txt
+++ b/Documentation/cputopology.txt
@@ -18,11 +18,11 @@ For an architecture to support this feature, it must define some of
 these macros in include/asm-XXX/topology.h:
 #define topology_physical_package_id(cpu)
 #define topology_core_id(cpu)
-#define topology_thread_siblings(cpu)
-#define topology_core_siblings(cpu)
+#define topology_thread_cpumask(cpu)
+#define topology_core_cpumask(cpu)
 
 The type of **_id is int.
-The type of siblings is cpumask_t.
+The type of siblings is (const) struct cpumask *.
 
 To be consistent on all architectures, include/linux/topology.h
 provides default definitions for any of the above macros that are
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index 2be08240ee8..53d64d38234 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -1,9 +1,9 @@
 
 		    LINUX ALLOCATED DEVICES (2.6+ version)
 
-	     Maintained by Torben Mathiasen <device@lanana.org>
+	     Maintained by Alan Cox <device@lanana.org>
 
-		      Last revised: 29 November 2006
+		      Last revised: 6th April 2009
 
 This list is the Linux Device List, the official registry of allocated
 device numbers and /dev directory nodes for the Linux operating
@@ -67,6 +67,11 @@ up to date.  Due to the number of registrations I have to maintain it
 in "batch mode", so there is likely additional registrations that
 haven't been listed yet.
 
+Fourth, remember that Linux now has extensive support for dynamic allocation
+of device numbering and can use sysfs and udev to handle the naming needs.
+There are still some exceptions in the serial and boot device area. Before
+asking for a device number make sure you actually need one.
+
 Finally, sometimes I have to play "namespace police."  Please don't be
 offended.  I often get submissions for /dev names that would be bound
 to cause conflicts down the road.  I am trying to avoid getting in a
@@ -101,7 +106,7 @@ Your cooperation is appreciated.
 		  0 = /dev/ram0		First RAM disk
 		  1 = /dev/ram1		Second RAM disk
 		    ...
-		250 = /dev/initrd	Initial RAM disk {2.6}
+		250 = /dev/initrd	Initial RAM disk
 
 		Older kernels had /dev/ramdisk (1, 1) here.
 		/dev/initrd refers to a RAM disk which was preloaded
@@ -340,7 +345,7 @@ Your cooperation is appreciated.
 		 14 = /dev/touchscreen/ucb1x00  UCB 1x00 touchscreen
 		 15 = /dev/touchscreen/mk712	MK712 touchscreen
 		128 = /dev/beep		Fancy beep device
-		129 = /dev/modreq	Kernel module load request {2.6}
+		129 =
 		130 = /dev/watchdog	Watchdog timer port
 		131 = /dev/temperature	Machine internal temperature
 		132 = /dev/hwtrap	Hardware fault trap
@@ -350,10 +355,10 @@ Your cooperation is appreciated.
 		139 = /dev/openprom	SPARC OpenBoot PROM
 		140 = /dev/relay8	Berkshire Products Octal relay card
 		141 = /dev/relay16	Berkshire Products ISO-16 relay card
-		142 = /dev/msr		x86 model-specific registers {2.6}
+		142 =
 		143 = /dev/pciconf	PCI configuration space
 		144 = /dev/nvram	Non-volatile configuration RAM
-		145 = /dev/hfmodem	Soundcard shortwave modem control {2.6}
+		145 = /dev/hfmodem	Soundcard shortwave modem control
 		146 = /dev/graphics	Linux/SGI graphics device
 		147 = /dev/opengl	Linux/SGI OpenGL pipe
 		148 = /dev/gfx		Linux/SGI graphics effects device
@@ -435,6 +440,9 @@ Your cooperation is appreciated.
 		228 = /dev/hpet		HPET driver
 		229 = /dev/fuse		Fuse (virtual filesystem in user-space)
 		230 = /dev/midishare	MidiShare driver
+		231 = /dev/snapshot	System memory snapshot device
+		232 = /dev/kvm		Kernel-based virtual machine (hardware virtualization extensions)
+		233 = /dev/kmview	View-OS A process with a view
 		240-254			Reserved for local use
 		255			Reserved for MISC_DYNAMIC_MINOR
 
@@ -466,10 +474,7 @@ Your cooperation is appreciated.
 		The device names specified are proposed -- if there
 		are "standard" names for these devices, please let me know.
 
- 12 block	MSCDEX CD-ROM callback support {2.6}
-		  0 = /dev/dos_cd0	First MSCDEX CD-ROM
-		  1 = /dev/dos_cd1	Second MSCDEX CD-ROM
-		    ...
+ 12 block
 
  13 char	Input core
 		  0 = /dev/input/js0	First joystick
@@ -498,7 +503,7 @@ Your cooperation is appreciated.
 		  2 = /dev/midi00	First MIDI port
 		  3 = /dev/dsp		Digital audio
 		  4 = /dev/audio	Sun-compatible digital audio
-		  6 = /dev/sndstat	Sound card status information {2.6}
+		  6 =
 		  7 = /dev/audioctl	SPARC audio control device
 		  8 = /dev/sequencer2	Sequencer -- alternate device
 		 16 = /dev/mixer1	Second soundcard mixer control
@@ -510,14 +515,7 @@ Your cooperation is appreciated.
 		 34 = /dev/midi02	Third MIDI port
 		 50 = /dev/midi03	Fourth MIDI port
 
- 14 block	BIOS harddrive callback support {2.6}
-		  0 = /dev/dos_hda	First BIOS harddrive whole disk
-		 64 = /dev/dos_hdb	Second BIOS harddrive whole disk
-		128 = /dev/dos_hdc	Third BIOS harddrive whole disk
-		192 = /dev/dos_hdd	Fourth BIOS harddrive whole disk
-
-		Partitions are handled in the same way as IDE disks
-		(see major number 3).
+ 14 block
 
  15 char	Joystick
 		  0 = /dev/js0		First analog joystick
@@ -535,14 +533,14 @@ Your cooperation is appreciated.
  16 block	GoldStar CD-ROM
 		  0 = /dev/gscd		GoldStar CD-ROM
 
- 17 char	Chase serial card
+ 17 char	OBSOLETE (was Chase serial card)
 		  0 = /dev/ttyH0	First Chase port
 		  1 = /dev/ttyH1	Second Chase port
 		    ...
  17 block	Optics Storage CD-ROM
 		  0 = /dev/optcd	Optics Storage CD-ROM
 
- 18 char	Chase serial card - alternate devices
+ 18 char	OBSOLETE (was Chase serial card - alternate devices)
 		  0 = /dev/cuh0		Callout device for ttyH0
 		  1 = /dev/cuh1		Callout device for ttyH1
 		    ...
@@ -644,8 +642,7 @@ Your cooperation is appreciated.
 		  2 = /dev/sbpcd2	Panasonic CD-ROM controller 0 unit 2
 		  3 = /dev/sbpcd3	Panasonic CD-ROM controller 0 unit 3
 
- 26 char	Quanta WinVision frame grabber {2.6}
-		  0 = /dev/wvisfgrab	Quanta WinVision frame grabber
+ 26 char
 
  26 block	Second Matsushita (Panasonic/SoundBlaster) CD-ROM
 		  0 = /dev/sbpcd4	Panasonic CD-ROM controller 1 unit 0
@@ -872,7 +869,7 @@ Your cooperation is appreciated.
 		and "user level packet I/O."  This board is also
 		accessible as a standard networking "eth" device.
 
- 38 block	Reserved for Linux/AP+
+ 38 block	OBSOLETE (was Linux/AP+)
 
  39 char	ML-16P experimental I/O board
 		  0 = /dev/ml16pa-a0	First card, first analog channel
@@ -892,29 +889,16 @@ Your cooperation is appreciated.
 		 50 = /dev/ml16pb-c1	Second card, second counter/timer
 		 51 = /dev/ml16pb-c2	Second card, third counter/timer
 		      ...
- 39 block	Reserved for Linux/AP+
+ 39 block
 
- 40 char	Matrox Meteor frame grabber {2.6}
-		  0 = /dev/mmetfgrab	Matrox Meteor frame grabber
+ 40 char
 
- 40 block	Syquest EZ135 parallel port removable drive
-		  0 = /dev/eza		Parallel EZ135 drive, whole disk
-
-		This device is obsolete and will be removed in a
-		future version of Linux.  It has been replaced with
-		the parallel port IDE disk driver at major number 45.
-		Partitions are handled in the same way as IDE disks
-		(see major number 3).
+ 40 block
 
  41 char	Yet Another Micro Monitor
 		  0 = /dev/yamm		Yet Another Micro Monitor
 
- 41 block	MicroSolutions BackPack parallel port CD-ROM
-		  0 = /dev/bpcd		BackPack CD-ROM
-
-		This device is obsolete and will be removed in a
-		future version of Linux.  It has been replaced with
-		the parallel port ATAPI CD-ROM driver at major number 46.
+ 41 block
 
  42 char	Demo/sample use
 
@@ -1681,13 +1665,7 @@ Your cooperation is appreciated.
 		disks (see major number 3) except that the limit on
 		partitions is 15.
 
- 93 char	IBM Smart Capture Card frame grabber {2.6}
-		  0 = /dev/iscc0	First Smart Capture Card
-		  1 = /dev/iscc1	Second Smart Capture Card
-		    ...
-		128 = /dev/isccctl0	First Smart Capture Card control
-		129 = /dev/isccctl1	Second Smart Capture Card control
-		    ...
+ 93 char
 
  93 block	NAND Flash Translation Layer filesystem
 		  0 = /dev/nftla	First NFTL layer
@@ -1695,10 +1673,7 @@ Your cooperation is appreciated.
 		    ...
 		240 = /dev/nftlp	16th NTFL layer
 
- 94 char	miroVIDEO DC10/30 capture/playback device {2.6}
-		  0 = /dev/dcxx0	First capture card
-		  1 = /dev/dcxx1	Second capture card
-		    ...
+ 94 char
 
  94 block	IBM S/390 DASD block storage
     		  0 = /dev/dasda First DASD device, major
@@ -1791,11 +1766,7 @@ Your cooperation is appreciated.
 		    ...
 		 15 = /dev/amiraid/ar?p15 15th partition
 
-102 char	Philips SAA5249 Teletext signal decoder {2.6}
-		  0 = /dev/tlk0		First Teletext decoder
-		  1 = /dev/tlk1		Second Teletext decoder
-		  2 = /dev/tlk2		Third Teletext decoder
-		  3 = /dev/tlk3		Fourth Teletext decoder
+102 char
 
 102 block	Compressed block device
 		  0 = /dev/cbd/a	First compressed block device, whole device
@@ -1916,10 +1887,7 @@ Your cooperation is appreciated.
 		DAC960 (see major number 48) except that the limit on
 		partitions is 15.
 
-111 char	Philips SAA7146-based audio/video card {2.6}
-		  0 = /dev/av0		First A/V card
-		  1 = /dev/av1		Second A/V card
-		    ...
+111 char
 
 111 block	Compaq Next Generation Drive Array, eighth controller
 		  0 = /dev/cciss/c7d0	First logical drive, whole disk
@@ -2079,8 +2047,8 @@ Your cooperation is appreciated.
 		    ...
 
 119 char	VMware virtual network control
-		  0 = /dev/vmnet0	1st virtual network
-		  1 = /dev/vmnet1	2nd virtual network
+		  0 = /dev/vnet0	1st virtual network
+		  1 = /dev/vnet1	2nd virtual network
 		    ...
 
 120-127 char	LOCAL/EXPERIMENTAL USE
@@ -2450,7 +2418,7 @@ Your cooperation is appreciated.
 		  2 = /dev/raw/raw2	Second raw I/O device
 		    ...
 
-163 char	UNASSIGNED (was Radio Tech BIM-XXX-RS232 radio modem - see 51)
+163 char
 
 164 char	Chase Research AT/PCI-Fast serial card
 		  0 = /dev/ttyCH0	AT/PCI-Fast board 0, port 0
@@ -2542,6 +2510,12 @@ Your cooperation is appreciated.
 		  1 = /dev/clanvi1	Second cLAN adapter
 		    ...
 
+179 block       MMC block devices
+		  0 = /dev/mmcblk0      First SD/MMC card
+		  1 = /dev/mmcblk0p1    First partition on first MMC card
+		  8 = /dev/mmcblk1      Second SD/MMC card
+		    ...
+
 179 char	CCube DVXChip-based PCI products
 		  0 = /dev/dvxirq0	First DVX device
 		  1 = /dev/dvxirq1	Second DVX device
@@ -2560,6 +2534,9 @@ Your cooperation is appreciated.
 		 96 = /dev/usb/hiddev0	1st USB HID device
 		    ...
 		111 = /dev/usb/hiddev15	16th USB HID device
+		112 = /dev/usb/auer0	1st auerswald ISDN device
+		    ...
+		127 = /dev/usb/auer15	16th auerswald ISDN device
 		128 = /dev/usb/brlvgr0	First Braille Voyager device
 		    ...
 		131 = /dev/usb/brlvgr3	Fourth Braille Voyager device
@@ -2810,6 +2787,20 @@ Your cooperation is appreciated.
 		    ...
 		 190 = /dev/ttyUL3		Xilinx uartlite - port 3
 		 191 = /dev/xvc0		Xen virtual console - port 0
+		 192 = /dev/ttyPZ0		pmac_zilog - port 0
+		    ...
+		 195 = /dev/ttyPZ3		pmac_zilog - port 3
+		 196 = /dev/ttyTX0		TX39/49 serial port 0
+		    ...
+		 204 = /dev/ttyTX7		TX39/49 serial port 7
+		 205 = /dev/ttySC0		SC26xx serial port 0
+		 206 = /dev/ttySC1		SC26xx serial port 1
+		 207 = /dev/ttySC2		SC26xx serial port 2
+		 208 = /dev/ttySC3		SC26xx serial port 3
+		 209 = /dev/ttyMAX0		MAX3100 serial port 0
+		 210 = /dev/ttyMAX1		MAX3100 serial port 1
+		 211 = /dev/ttyMAX2		MAX3100 serial port 2
+		 212 = /dev/ttyMAX3		MAX3100 serial port 3
 
 205 char	Low-density serial ports (alternate device)
 		  0 = /dev/culu0		Callout device for ttyLU0
@@ -3145,6 +3136,20 @@ Your cooperation is appreciated.
 		  1 = /dev/blockrom1	Second ROM card's translation layer interface
 		  ...
 
+259 block	Block Extended Major
+		  Used dynamically to hold additional partition minor
+		  numbers and allow large numbers of partitions per device
+
+259 char	FPGA configuration interfaces
+		  0 = /dev/icap0	First Xilinx internal configuration
+		  1 = /dev/icap1	Second Xilinx internal configuration
+
+260 char	OSD (Object-based-device) SCSI Device
+		  0 = /dev/osd0		First OSD Device
+		  1 = /dev/osd1		Second OSD Device
+		  ...
+		  255 = /dev/osd255	256th OSD Device
+
  ****	ADDITIONAL /dev DIRECTORY ENTRIES
 
 This section details additional entries that should or may exist in
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index 1e89a51ea49..88519daab6e 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -62,7 +62,6 @@ aic7*reg_print.c*
 aic7*seq.h*
 aicasm
 aicdb.h*
-asm
 asm-offsets.h
 asm_offsets.h
 autoconf.h*
diff --git a/Documentation/driver-model/device.txt b/Documentation/driver-model/device.txt
index a05ec50f800..a7cbfff40d0 100644
--- a/Documentation/driver-model/device.txt
+++ b/Documentation/driver-model/device.txt
@@ -127,9 +127,11 @@ void unlock_device(struct device * dev);
 Attributes
 ~~~~~~~~~~
 struct device_attribute {
-        struct attribute        attr;
-        ssize_t (*show)(struct device * dev, char * buf, size_t count, loff_t off);
-        ssize_t (*store)(struct device * dev, const char * buf, size_t count, loff_t off);
+	struct attribute	attr;
+	ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count);
 };
 
 Attributes of devices can be exported via drivers using a simple
diff --git a/Documentation/dvb/README.flexcop b/Documentation/dvb/README.flexcop
deleted file mode 100644
index 5515469de7c..00000000000
--- a/Documentation/dvb/README.flexcop
+++ /dev/null
@@ -1,205 +0,0 @@
-This README escorted the skystar2-driver rewriting procedure. It describes the
-state of the new flexcop-driver set and some internals are written down here
-too.
-
-This document hopefully describes things about the flexcop and its
-device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
-drivers based on the skystar2.c and other information.
-
-Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
-touched and rewritten.
-
-History & News
-==============
-  2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
-
-
-
-
-General coding processing
-=========================
-
-We should proceed as follows (as long as no one complains):
-
-0) Think before start writing code!
-
-1) rewriting the skystar2.c with the help of the flexcop register descriptions
-and splitting up the files to a pci-bus-part and a flexcop-part.
-The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
-device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
-
-2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
-and other pci drivers)
-
-3) make some beautification (see 'Improvements when rewriting (refactoring) is
-done')
-
-4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
-a wider tester audience.
-
-5) creating an usb-bus-part using the already written flexcop code for the pci
-card.
-
-Idea: create a kernel-object for the flexcop and export all important
-functions. This option saves kernel-memory, but maybe a lot of functions have
-to be exported to kernel namespace.
-
-
-Current situation
-=================
-
-0) Done :)
-1) Done (some minor issues left)
-2) Done
-3) Not ready yet, more information is necessary
-4) next to be done (see the table below)
-5) USB driver is working (yes, there are some minor issues)
-
-What seems to be ready?
------------------------
-
-1) Rewriting
-1a) i2c is cut off from the flexcop-pci.c and seems to work
-1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
-1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
-1e) eeprom (reading MAC address)
-1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
-1f) misc. register accesses for reading parameters (e.g. resetting, revision)
-1g) pid/mac filter (flexcop-hw-filter.c)
-1i) dvb-stuff initialization in flexcop.c (done)
-1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
-1j) remove flexcop initialization from flexcop-pci.c completely (done)
-1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
-1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
-non-static where possible, moved code to proper places)
-
-2) Search for errors in the leftover of flexcop-pci.c (partially done)
-5a) add MAC address reading
-5c) feeding of ISOC data to the software demux (format of the isochronous data
-and speed optimization, no real error) (thanks to Vadim Catana)
-
-What to do in the near future?
---------------------------------------
-(no special order here)
-
-5) USB driver
-5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
-
-Testing changes
----------------
-
-O             = item is working
-P             = item is partially working
-X             = item is not working
-N             = item does not apply here
-<empty field> = item need to be examined
-
-       | PCI                               | USB
-item   | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
--------+-------+---------+---------+-------+-------+---------+---------+-------
-1a)    | O     |         |         |       | N     | N       | N       | N
-1b)    | O     |         |         |       |       |         | O       |
-1c)    | N     | N       |         |       | N     | N       | O       |
-1d)    |                 O                 |                 O
-1e)    |                 O                 |                 O
-1f)    |                                   P
-1g)    |                                   O
-1h)    |                 P                 |
-1i)    |                 O                 |                 N
-1j)    |                 O                 |                 N
-1l)    |                 O                 |                 N
-2)     |                 O                 |                 N
-5a)    |                 N                 |                 O
-5b)*   |                 N                 |
-5c)    |                 N                 |                 O
-
-* - not done yet
-
-Known bugs and problems and TODO
---------------------------------
-
-1g/h/l) when pid filtering is enabled on the pci card
-
-DMA usage currently:
-  The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
-  address and triggers an IRQ when it's full and starts writing to the second
-  address. When the second address is full, the IRQ is triggered again, and
-  the flexcop writes to first address again, and so on.
-  The buffersize of each address is currently 640*188 bytes.
-
-  Problem is, when using hw-pid-filtering and doing some low-bandwidth
-  operation (like scanning) the buffers won't be filled enough to trigger
-  the IRQ. That's why:
-
-  When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
-  is triggered.  Is the current write address of DMA1 different to the one
-  during the last IRQ, then the data is passed to the demuxer.
-
-  There is an additional DMA-IRQ-method: packet count IRQ. This isn't
-  implemented correctly yet.
-
-  The solution is to disable HW PID filtering, but I don't know how the DVB
-  API software demux behaves on slow systems with 45MBit/s TS.
-
-Solved bugs :)
---------------
-1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
-working)
-SOLUTION: also index 0 was affected, because net_translation is done for
-these indexes by default
-
-5b) isochronous transfer does only work in the first attempt (for the Sky2PC
-USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
-woke up again (don't know if this need fixes, see
-flexcop-fe-tuner.c:flexcop_sleep)
-
-NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
-anything in the while the driver is loaded the first time), no transfers take
-place anymore.
-
-Improvements when rewriting (refactoring) is done
-=================================================
-
-- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
-  (enable sleeping for other demods than dvb-s)
-- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
-
-Debugging
----------
-- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
-  with this flexcop, this is important, because i2c is now using the
-  flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
-  that, please tell us so).
-
-Everything which is identical in the following table, can be put into a common
-flexcop-module.
-
-		  PCI                  USB
--------------------------------------------------------------------------------
-Different:
-Register access:  accessing IO memory  USB control message
-I2C bus:          I2C bus of the FC    USB control message
-Data transfer:    DMA                  isochronous transfer
-EEPROM transfer:  through i2c bus      not clear yet
-
-Identical:
-Streaming:                 accessing registers
-PID Filtering:             accessing registers
-Sram destinations:         accessing registers
-Tuner/Demod:                     I2C bus
-DVB-stuff:            can be written for common use
-
-Acknowledgements (just for the rewriting part)
-================
-
-Bjarne Steinsbo thought a lot in the first place of the pci part for this code
-sharing idea.
-
-Andreas Oberritter for providing a recent PCI initialization template
-(pluto2.c).
-
-Boleslaw Ciesielski for pointing out a problem with firmware loader.
-
-Vadim Catana for correcting the USB transfer.
-
-comments, critics and ideas to linux-dvb@linuxtv.org.
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index f2e908d7f90..2f21ecd4c20 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -25,7 +25,7 @@ use IO::Handle;
 		"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
 		"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
 		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
-		"opera1");
+		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2" );
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -37,8 +37,8 @@ for ($i=0; $i < scalar(@components); $i++) {
 	$outfile = eval($cid);
 	die $@ if $@;
 	print STDERR <<EOF;
-Firmware $outfile extracted successfully.
-Now copy it to either /usr/lib/hotplug/firmware or /lib/firmware
+Firmware(s) $outfile extracted successfully.
+Now copy it(they) to either /usr/lib/hotplug/firmware or /lib/firmware
 (depending on configuration of firmware hotplug).
 EOF
 	exit(0);
@@ -345,6 +345,85 @@ sub or51211 {
     $fwfile;
 }
 
+sub cx231xx {
+    my $fwfile = "v4l-cx231xx-avcore-01.fw";
+    my $url = "http://linuxtv.org/downloads/firmware/$fwfile";
+    my $hash = "7d3bb956dc9df0eafded2b56ba57cc42";
+
+    checkstandard();
+
+    wgetfile($fwfile, $url);
+    verify($fwfile, $hash);
+
+    $fwfile;
+}
+
+sub cx18 {
+    my $url = "http://linuxtv.org/downloads/firmware/";
+
+    my %files = (
+	'v4l-cx23418-apu.fw' => '588f081b562f5c653a3db1ad8f65939a',
+	'v4l-cx23418-cpu.fw' => 'b6c7ed64bc44b1a6e0840adaeac39d79',
+	'v4l-cx23418-dig.fw' => '95bc688d3e7599fd5800161e9971cc55',
+    );
+
+    checkstandard();
+
+    my $allfiles;
+    foreach my $fwfile (keys %files) {
+	wgetfile($fwfile, "$url/$fwfile");
+	verify($fwfile, $files{$fwfile});
+	$allfiles .= " $fwfile";
+    }
+
+    $allfiles =~ s/^\s//;
+
+    $allfiles;
+}
+
+sub cx23885 {
+    my $url = "http://linuxtv.org/downloads/firmware/";
+
+    my %files = (
+	'v4l-cx23885-avcore-01.fw' => 'a9f8f5d901a7fb42f552e1ee6384f3bb',
+	'v4l-cx23885-enc.fw'       => 'a9f8f5d901a7fb42f552e1ee6384f3bb',
+    );
+
+    checkstandard();
+
+    my $allfiles;
+    foreach my $fwfile (keys %files) {
+	wgetfile($fwfile, "$url/$fwfile");
+	verify($fwfile, $files{$fwfile});
+	$allfiles .= " $fwfile";
+    }
+
+    $allfiles =~ s/^\s//;
+
+    $allfiles;
+}
+
+sub pvrusb2 {
+    my $url = "http://linuxtv.org/downloads/firmware/";
+
+    my %files = (
+	'v4l-cx25840.fw'           => 'dadb79e9904fc8af96e8111d9cb59320',
+    );
+
+    checkstandard();
+
+    my $allfiles;
+    foreach my $fwfile (keys %files) {
+	wgetfile($fwfile, "$url/$fwfile");
+	verify($fwfile, $files{$fwfile});
+	$allfiles .= " $fwfile";
+    }
+
+    $allfiles =~ s/^\s//;
+
+    $allfiles;
+}
+
 sub or51132_qam {
     my $fwfile = "dvb-fe-or51132-qam.fw";
     my $url = "http://linuxtv.org/downloads/firmware/$fwfile";
diff --git a/Documentation/dvb/technisat.txt b/Documentation/dvb/technisat.txt
index cdf6ee4b2da..3f435ffb289 100644
--- a/Documentation/dvb/technisat.txt
+++ b/Documentation/dvb/technisat.txt
@@ -1,5 +1,5 @@
-How to set up the Technisat devices
-===================================
+How to set up the Technisat/B2C2 Flexcop devices
+================================================
 
 1) Find out what device you have
 ================================
@@ -16,54 +16,60 @@ DVB: registering frontend 0 (Conexant CX24123/CX24109)...
 
 If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one:
 "Multimedia devices" => "Customise analog and hybrid tuner modules to build"
-In this directory uncheck every driver which is activated there.
+In this directory uncheck every driver which is activated there (except "Simple tuner support" for case 9 only).
 
 Then please activate:
 2a) Main module part:
 
 a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters"
-b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card OR
+b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card
+OR
 c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter
 d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers"
 Notice: d.) is helpful for troubleshooting
 
 2b) Frontend module part:
 
-1.) Revision 2.3:
+1.) SkyStar DVB-S Revision 2.3:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based"
 
-2.) Revision 2.6:
+2.) SkyStar DVB-S Revision 2.6:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based"
 
-3.) Revision 2.7:
+3.) SkyStar DVB-S Revision 2.7:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based"
 c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
 d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
 
-4.) Revision 2.8:
+4.) SkyStar DVB-S Revision 2.8:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
 c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based"
 d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
 
-5.) DVB-T card:
+5.) AirStar DVB-T card:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based"
 
-6.) DVB-C card:
+6.) CableStar DVB-C card:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based"
 
-7.) ATSC card 1st generation:
+7.) AirStar ATSC card 1st generation:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510"
 
-8.) ATSC card 2nd generation:
+8.) AirStar ATSC card 2nd generation:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based"
-c.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
+c.)"Multimedia devices" => "Customise DVB frontends" => "Generic I2C PLL based tuners"
 
-Author: Uwe Bugla <uwe.bugla@gmx.de> December 2008
+9.) AirStar ATSC card 3rd generation:
+a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
+b.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
+c.)"Multimedia devices" => "Customise analog and hybrid tuner modules to build" => "Simple tuner support"
+
+Author: Uwe Bugla <uwe.bugla@gmx.de> February 2009
diff --git a/Documentation/dynamic-debug-howto.txt b/Documentation/dynamic-debug-howto.txt
new file mode 100644
index 00000000000..674c5663d34
--- /dev/null
+++ b/Documentation/dynamic-debug-howto.txt
@@ -0,0 +1,240 @@
+
+Introduction
+============
+
+This document describes how to use the dynamic debug (ddebug) feature.
+
+Dynamic debug is designed to allow you to dynamically enable/disable kernel
+code to obtain additional kernel information. Currently, if
+CONFIG_DYNAMIC_DEBUG is set, then all pr_debug()/dev_debug() calls can be
+dynamically enabled per-callsite.
+
+Dynamic debug has even more useful features:
+
+ * Simple query language allows turning on and off debugging statements by
+   matching any combination of:
+
+   - source filename
+   - function name
+   - line number (including ranges of line numbers)
+   - module name
+   - format string
+
+ * Provides a debugfs control file: <debugfs>/dynamic_debug/control which can be
+   read to display the complete list of known debug statements, to help guide you
+
+Controlling dynamic debug Behaviour
+===============================
+
+The behaviour of pr_debug()/dev_debug()s are controlled via writing to a
+control file in the 'debugfs' filesystem. Thus, you must first mount the debugfs
+filesystem, in order to make use of this feature. Subsequently, we refer to the
+control file as: <debugfs>/dynamic_debug/control. For example, if you want to
+enable printing from source file 'svcsock.c', line 1603 you simply do:
+
+nullarbor:~ # echo 'file svcsock.c line 1603 +p' >
+				<debugfs>/dynamic_debug/control
+
+If you make a mistake with the syntax, the write will fail thus:
+
+nullarbor:~ # echo 'file svcsock.c wtf 1 +p' >
+				<debugfs>/dynamic_debug/control
+-bash: echo: write error: Invalid argument
+
+Viewing Dynamic Debug Behaviour
+===========================
+
+You can view the currently configured behaviour of all the debug statements
+via:
+
+nullarbor:~ # cat <debugfs>/dynamic_debug/control
+# filename:lineno [module]function flags format
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:323 [svcxprt_rdma]svc_rdma_cleanup - "SVCRDMA Module Removed, deregister RPC RDMA transport\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:341 [svcxprt_rdma]svc_rdma_init - "\011max_inline       : %d\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:340 [svcxprt_rdma]svc_rdma_init - "\011sq_depth         : %d\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:338 [svcxprt_rdma]svc_rdma_init - "\011max_requests     : %d\012"
+...
+
+
+You can also apply standard Unix text manipulation filters to this
+data, e.g.
+
+nullarbor:~ # grep -i rdma <debugfs>/dynamic_debug/control  | wc -l
+62
+
+nullarbor:~ # grep -i tcp <debugfs>/dynamic_debug/control | wc -l
+42
+
+Note in particular that the third column shows the enabled behaviour
+flags for each debug statement callsite (see below for definitions of the
+flags).  The default value, no extra behaviour enabled, is "-".  So
+you can view all the debug statement callsites with any non-default flags:
+
+nullarbor:~ # awk '$3 != "-"' <debugfs>/dynamic_debug/control
+# filename:lineno [module]function flags format
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c:1603 [sunrpc]svc_send p "svc_process: st_sendto returned %d\012"
+
+
+Command Language Reference
+==========================
+
+At the lexical level, a command comprises a sequence of words separated
+by whitespace characters.  Note that newlines are treated as word
+separators and do *not* end a command or allow multiple commands to
+be done together.  So these are all equivalent:
+
+nullarbor:~ # echo -c 'file svcsock.c line 1603 +p' >
+				<debugfs>/dynamic_debug/control
+nullarbor:~ # echo -c '  file   svcsock.c     line  1603 +p  ' >
+				<debugfs>/dynamic_debug/control
+nullarbor:~ # echo -c 'file svcsock.c\nline 1603 +p' >
+				<debugfs>/dynamic_debug/control
+nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
+				<debugfs>/dynamic_debug/control
+
+Commands are bounded by a write() system call.  If you want to do
+multiple commands you need to do a separate "echo" for each, like:
+
+nullarbor:~ # echo 'file svcsock.c line 1603 +p' > /proc/dprintk ;\
+> echo 'file svcsock.c line 1563 +p' > /proc/dprintk
+
+or even like:
+
+nullarbor:~ # (
+> echo 'file svcsock.c line 1603 +p' ;\
+> echo 'file svcsock.c line 1563 +p' ;\
+> ) > /proc/dprintk
+
+At the syntactical level, a command comprises a sequence of match
+specifications, followed by a flags change specification.
+
+command ::= match-spec* flags-spec
+
+The match-spec's are used to choose a subset of the known dprintk()
+callsites to which to apply the flags-spec.  Think of them as a query
+with implicit ANDs between each pair.  Note that an empty list of
+match-specs is possible, but is not very useful because it will not
+match any debug statement callsites.
+
+A match specification comprises a keyword, which controls the attribute
+of the callsite to be compared, and a value to compare against.  Possible
+keywords are:
+
+match-spec ::= 'func' string |
+	       'file' string |
+	       'module' string |
+	       'format' string |
+	       'line' line-range
+
+line-range ::= lineno |
+	       '-'lineno |
+	       lineno'-' |
+	       lineno'-'lineno
+// Note: line-range cannot contain space, e.g.
+// "1-30" is valid range but "1 - 30" is not.
+
+lineno ::= unsigned-int
+
+The meanings of each keyword are:
+
+func
+    The given string is compared against the function name
+    of each callsite.  Example:
+
+    func svc_tcp_accept
+
+file
+    The given string is compared against either the full
+    pathname or the basename of the source file of each
+    callsite.  Examples:
+
+    file svcsock.c
+    file /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c
+
+module
+    The given string is compared against the module name
+    of each callsite.  The module name is the string as
+    seen in "lsmod", i.e. without the directory or the .ko
+    suffix and with '-' changed to '_'.  Examples:
+
+    module sunrpc
+    module nfsd
+
+format
+    The given string is searched for in the dynamic debug format
+    string.  Note that the string does not need to match the
+    entire format, only some part.  Whitespace and other
+    special characters can be escaped using C octal character
+    escape \ooo notation, e.g. the space character is \040.
+    Alternatively, the string can be enclosed in double quote
+    characters (") or single quote characters (').
+    Examples:
+
+    format svcrdma:	    // many of the NFS/RDMA server dprintks
+    format readahead	    // some dprintks in the readahead cache
+    format nfsd:\040SETATTR // one way to match a format with whitespace
+    format "nfsd: SETATTR"  // a neater way to match a format with whitespace
+    format 'nfsd: SETATTR'  // yet another way to match a format with whitespace
+
+line
+    The given line number or range of line numbers is compared
+    against the line number of each dprintk() callsite.  A single
+    line number matches the callsite line number exactly.  A
+    range of line numbers matches any callsite between the first
+    and last line number inclusive.  An empty first number means
+    the first line in the file, an empty line number means the
+    last number in the file.  Examples:
+
+    line 1603	    // exactly line 1603
+    line 1600-1605  // the six lines from line 1600 to line 1605
+    line -1605	    // the 1605 lines from line 1 to line 1605
+    line 1600-	    // all lines from line 1600 to the end of the file
+
+The flags specification comprises a change operation followed
+by one or more flag characters.  The change operation is one
+of the characters:
+
+-
+    remove the given flags
+
++
+    add the given flags
+
+=
+    set the flags to the given flags
+
+The flags are:
+
+p
+    Causes a printk() message to be emitted to dmesg
+
+Note the regexp ^[-+=][scp]+$ matches a flags specification.
+Note also that there is no convenient syntax to remove all
+the flags at once, you need to use "-psc".
+
+Examples
+========
+
+// enable the message at line 1603 of file svcsock.c
+nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
+				<debugfs>/dynamic_debug/control
+
+// enable all the messages in file svcsock.c
+nullarbor:~ # echo -n 'file svcsock.c +p' >
+				<debugfs>/dynamic_debug/control
+
+// enable all the messages in the NFS server module
+nullarbor:~ # echo -n 'module nfsd +p' >
+				<debugfs>/dynamic_debug/control
+
+// enable all 12 messages in the function svc_process()
+nullarbor:~ # echo -n 'func svc_process +p' >
+				<debugfs>/dynamic_debug/control
+
+// disable all 12 messages in the function svc_process()
+nullarbor:~ # echo -n 'func svc_process -p' >
+				<debugfs>/dynamic_debug/control
+
+// enable messages for NFS calls READ, READLINK, READDIR and READDIR+.
+nullarbor:~ # echo -n 'format "nfsd: READ" +p' >
+				<debugfs>/dynamic_debug/control
diff --git a/Documentation/fb/00-INDEX b/Documentation/fb/00-INDEX
index caabbd395e6..a618fd99c9f 100644
--- a/Documentation/fb/00-INDEX
+++ b/Documentation/fb/00-INDEX
@@ -11,8 +11,6 @@ aty128fb.txt
 	- info on the ATI Rage128 frame buffer driver.
 cirrusfb.txt
 	- info on the driver for Cirrus Logic chipsets.
-cyblafb/
-	- directory with documentation files related to the cyblafb driver.
 deferred_io.txt
 	- an introduction to deferred IO.
 fbcon.txt
diff --git a/Documentation/fb/cyblafb/bugs b/Documentation/fb/cyblafb/bugs
deleted file mode 100644
index 9443a6d72cd..00000000000
--- a/Documentation/fb/cyblafb/bugs
+++ /dev/null
@@ -1,13 +0,0 @@
-Bugs
-====
-
-I currently don't know of any bug. Please do send reports to:
- - linux-fbdev-devel@lists.sourceforge.net
- - Knut_Petersen@t-online.de.
-
-
-Untested features
-=================
-
-All LCD stuff is untested. If it worked in tridentfb, it should work in
-cyblafb. Please test and report the results to Knut_Petersen@t-online.de.
diff --git a/Documentation/fb/cyblafb/credits b/Documentation/fb/cyblafb/credits
deleted file mode 100644
index 0eb3b443dc2..00000000000
--- a/Documentation/fb/cyblafb/credits
+++ /dev/null
@@ -1,7 +0,0 @@
-Thanks to
-=========
-   * 	Alan Hourihane, for writing the X trident driver
-   *	Jani Monoses, for writing the tridentfb driver
-   *	Antonino A. Daplas, for review of the first published
-	version of cyblafb and some code
-   *	Jochen Hein, for testing and a helpfull bug report
diff --git a/Documentation/fb/cyblafb/documentation b/Documentation/fb/cyblafb/documentation
deleted file mode 100644
index bb1aac04842..00000000000
--- a/Documentation/fb/cyblafb/documentation
+++ /dev/null
@@ -1,17 +0,0 @@
-Available Documentation
-=======================
-
-Apollo PLE 133 Chipset VT8601A North Bridge Datasheet, Rev. 1.82, October 22,
-2001, available from VIA:
-
-	http://www.viavpsd.com/product/6/15/DS8601A182.pdf
-
-The datasheet is incomplete, some registers that need to be programmed are not
-explained at all and important bits are listed as "reserved". But you really
-need the datasheet to understand the code.  "p. xxx" comments refer to page
-numbers of this document.
-
-XFree/XOrg drivers are available and of good quality, looking at the code
-there is a good idea if the datasheet does not provide enough information
-or if the datasheet seems to be wrong.
-
diff --git a/Documentation/fb/cyblafb/fb.modes b/Documentation/fb/cyblafb/fb.modes
deleted file mode 100644
index fe0e5223ba8..00000000000
--- a/Documentation/fb/cyblafb/fb.modes
+++ /dev/null
@@ -1,154 +0,0 @@
-#
-#   Sample fb.modes file
-#
-#	Provides an incomplete list of working modes for
-#	the cyberblade/i1 graphics core.
-#
-#	The value 4294967256 is used instead of -40. Of course, -40 is not
-#	a really reasonable value, but chip design does not always follow
-#	logic. Believe me, it's ok, and it's the way the BIOS does it.
-#
-#	fbset requires 4294967256 in fb.modes and -40 as an argument to
-#	the -t parameter. That's also not too reasonable, and it might change
-#	in the future or might even be differt for your current version.
-#
-
-mode "640x480-50"
-    geometry 640 480 2048 4096 8
-    timings 47619 4294967256 24 17 0 216 3
-endmode
-
-mode "640x480-60"
-    geometry 640 480 2048 4096 8
-    timings 39682 4294967256 24 17 0 216 3
-endmode
-
-mode "640x480-70"
-    geometry 640 480 2048 4096 8
-    timings 34013 4294967256 24 17 0 216 3
-endmode
-
-mode "640x480-72"
-    geometry 640 480 2048 4096 8
-    timings 33068 4294967256 24 17 0 216 3
-endmode
-
-mode "640x480-75"
-    geometry 640 480 2048 4096 8
-    timings 31746 4294967256 24 17 0 216 3
-endmode
-
-mode "640x480-80"
-    geometry 640 480 2048 4096 8
-    timings 29761 4294967256 24 17 0 216 3
-endmode
-
-mode "640x480-85"
-    geometry 640 480 2048 4096 8
-    timings 28011 4294967256 24 17 0 216 3
-endmode
-
-mode "800x600-50"
-    geometry 800 600 2048 4096 8
-    timings 30303 96 24 14 0 136 11
-endmode
-
-mode "800x600-60"
-    geometry 800 600 2048 4096 8
-    timings 25252 96 24 14 0 136 11
-endmode
-
-mode "800x600-70"
-    geometry 800 600 2048 4096 8
-    timings 21645 96 24 14 0 136 11
-endmode
-
-mode "800x600-72"
-    geometry 800 600 2048 4096 8
-    timings 21043 96 24 14 0 136 11
-endmode
-
-mode "800x600-75"
-    geometry 800 600 2048 4096 8
-    timings 20202 96 24 14 0 136 11
-endmode
-
-mode "800x600-80"
-    geometry 800 600 2048 4096 8
-    timings 18939 96 24 14 0 136 11
-endmode
-
-mode "800x600-85"
-    geometry 800 600 2048 4096 8
-    timings 17825 96 24 14 0 136 11
-endmode
-
-mode "1024x768-50"
-    geometry 1024 768 2048 4096 8
-    timings 19054 144 24 29 0 120 3
-endmode
-
-mode "1024x768-60"
-    geometry 1024 768 2048 4096 8
-    timings 15880 144 24 29 0 120 3
-endmode
-
-mode "1024x768-70"
-    geometry 1024 768 2048 4096 8
-    timings 13610 144 24 29 0 120 3
-endmode
-
-mode "1024x768-72"
-    geometry 1024 768 2048 4096 8
-    timings 13232 144 24 29 0 120 3
-endmode
-
-mode "1024x768-75"
-    geometry 1024 768 2048 4096 8
-    timings 12703 144 24 29 0 120 3
-endmode
-
-mode "1024x768-80"
-    geometry 1024 768 2048 4096 8
-    timings 11910 144 24 29 0 120 3
-endmode
-
-mode "1024x768-85"
-    geometry 1024 768 2048 4096 8
-    timings 11209 144 24 29 0 120 3
-endmode
-
-mode "1280x1024-50"
-    geometry 1280 1024 2048 4096 8
-    timings 11114 232 16 39 0 160 3
-endmode
-
-mode "1280x1024-60"
-    geometry 1280 1024 2048 4096 8
-    timings 9262 232 16 39 0 160 3
-endmode
-
-mode "1280x1024-70"
-    geometry 1280 1024 2048 4096 8
-    timings 7939 232 16 39 0 160 3
-endmode
-
-mode "1280x1024-72"
-    geometry 1280 1024 2048 4096 8
-    timings 7719 232 16 39 0 160 3
-endmode
-
-mode "1280x1024-75"
-    geometry 1280 1024 2048 4096 8
-    timings 7410 232 16 39 0 160 3
-endmode
-
-mode "1280x1024-80"
-    geometry 1280 1024 2048 4096 8
-    timings 6946 232 16 39 0 160 3
-endmode
-
-mode "1280x1024-85"
-    geometry 1280 1024 2048 4096 8
-    timings 6538 232 16 39 0 160 3
-endmode
diff --git a/Documentation/fb/cyblafb/performance b/Documentation/fb/cyblafb/performance
deleted file mode 100644
index 8d15d5dfc6b..00000000000
--- a/Documentation/fb/cyblafb/performance
+++ /dev/null
@@ -1,79 +0,0 @@
-Speed
-=====
-
-CyBlaFB is much faster than tridentfb and vesafb. Compare the performance data
-for mode 1280x1024-[8,16,32]@61 Hz.
-
-Test 1: Cat a file with 2000 lines of 0 characters.
-Test 2: Cat a file with 2000 lines of 80 characters.
-Test 3: Cat a file with 2000 lines of 160 characters.
-
-All values show system time use in seconds, kernel 2.6.12 was used for
-the measurements. 2.6.13 is a bit slower, 2.6.14 hopefully will include a
-patch that speeds up kernel bitblitting a lot ( > 20%).
-
-+-----------+-----------------------------------------------------+
-|	    |			not accelerated 		  |
-| TRIDENTFB +-----------------+-----------------+-----------------+
-| of 2.6.12 |	   8 bpp      |     16 bpp	|     32 bpp	  |
-|	    | noypan |	 ypan | noypan |   ypan | noypan |   ypan |
-+-----------+--------+--------+--------+--------+--------+--------+
-|    Test 1 |	4.31 |	 4.33 |   6.05 |  12.81 |  ----  |  ----  |
-|    Test 2 |  67.94 |	 5.44 | 123.16 |  14.79 |  ----  |  ----  |
-|    Test 3 | 131.36 |	 6.55 | 240.12 |  16.76 |  ----  |  ----  |
-+-----------+--------+--------+--------+--------+--------+--------+
-|  Comments |		      | 		| completely bro- |
-|	    |		      | 		| ken, monitor	  |
-|	    |		      | 		| switches off	  |
-+-----------+-----------------+-----------------+-----------------+
-
-
-+-----------+-----------------------------------------------------+
-|	    |			  accelerated			  |
-| TRIDENTFB +-----------------+-----------------+-----------------+
-| of 2.6.12 |	   8 bpp      |     16 bpp	|     32 bpp	  |
-|	    | noypan |	 ypan | noypan |   ypan | noypan |   ypan |
-+-----------+--------+--------+--------+--------+--------+--------+
-|    Test 1 |  ----  |	----  |  20.62 |   1.22 |  ----  |  ----  |
-|    Test 2 |  ----  |	----  |  22.61 |   3.19 |  ----  |  ----  |
-|    Test 3 |  ----  |	----  |  24.59 |   5.16 |  ----  |  ----  |
-+-----------+--------+--------+--------+--------+--------+--------+
-|  Comments | broken, writing | broken, ok only | completely bro- |
-|	    | to wrong places | if bgcolor is	| ken, monitor	  |
-|	    | on screen + bug | black, bug in	| switches off	  |
-|	    | in fillrect()   | fillrect()	|		  |
-+-----------+-----------------+-----------------+-----------------+
-
-
-+-----------+-----------------------------------------------------+
-|	    |			not accelerated 		  |
-|   VESAFB  +-----------------+-----------------+-----------------+
-| of 2.6.12 |	   8 bpp      |     16 bpp	|     32 bpp	  |
-|	    | noypan |	 ypan | noypan |   ypan | noypan |   ypan |
-+-----------+--------+--------+--------+--------+--------+--------+
-|    Test 1 |	4.26 |	 3.76 |   5.99 |   7.23 |  ----  |  ----  |
-|    Test 2 |  65.65 |	 4.89 | 120.88 |   9.08 |  ----  |  ----  |
-|    Test 3 | 126.91 |	 5.94 | 235.77 |  11.03 |  ----  |  ----  |
-+-----------+--------+--------+--------+--------+--------+--------+
-|  Comments | vga=0x307       | vga=0x31a	| vga=0x31b not   |
-|	    | fh=80kHz	      | fh=80kHz	| supported by	  |
-|	    | fv=75kHz	      | fv=75kHz	| video BIOS and  |
-|	    |		      | 		| hardware	  |
-+-----------+-----------------+-----------------+-----------------+
-
-
-+-----------+-----------------------------------------------------+
-|	    |			  accelerated			  |
-|  CYBLAFB  +-----------------+-----------------+-----------------+
-|	    |	   8 bpp      |     16 bpp	|     32 bpp	  |
-|	    | noypan |	 ypan | noypan |   ypan | noypan |   ypan |
-+-----------+--------+--------+--------+--------+--------+--------+
-|    Test 1 |	8.02 |	 0.23 |  19.04 |   0.61 |  57.12 |   2.74 |
-|    Test 2 |	8.38 |	 0.55 |  19.39 |   0.92 |  57.54 |   3.13 |
-|    Test 3 |	8.73 |	 0.86 |  19.74 |   1.24 |  57.95 |   3.51 |
-+-----------+--------+--------+--------+--------+--------+--------+
-|  Comments |		      | 		|		  |
-|	    |		      | 		|		  |
-|	    |		      | 		|		  |
-|	    |		      | 		|		  |
-+-----------+-----------------+-----------------+-----------------+
diff --git a/Documentation/fb/cyblafb/todo b/Documentation/fb/cyblafb/todo
deleted file mode 100644
index c5f6d0eae54..00000000000
--- a/Documentation/fb/cyblafb/todo
+++ /dev/null
@@ -1,31 +0,0 @@
-TODO / Missing features
-=======================
-
-Verify LCD stuff		"stretch" and "center" options are
-				completely untested ... this code needs to be
-				verified. As I don't have access to such
-				hardware, please contact me if you are
-				willing run some tests.
-
-Interlaced video modes		The reason that interleaved
-				modes are disabled is that I do not know
-				the meaning of the vertical interlace
-				parameter. Also the datasheet mentions a
-				bit d8 of a horizontal interlace parameter,
-				but nowhere the lower 8 bits. Please help
-				if you can.
-
-low-res double scan modes	Who needs it?
-
-accelerated color blitting	Who needs it? The console driver does use color
-				blitting for nothing but drawing the penguine,
-				everything else is done using color expanding
-				blitting of 1bpp character bitmaps.
-
-ioctls				Who needs it?
-
-TV-out				Will be done later. Use "vga= " at boot time
-				to set a suitable video mode.
-
-???				Feel free to contact me if you have any
-				feature requests
diff --git a/Documentation/fb/cyblafb/usage b/Documentation/fb/cyblafb/usage
deleted file mode 100644
index a39bb3d402a..00000000000
--- a/Documentation/fb/cyblafb/usage
+++ /dev/null
@@ -1,217 +0,0 @@
-CyBlaFB is a framebuffer driver for the Cyberblade/i1 graphics core integrated
-into the VIA Apollo PLE133 (aka vt8601) south bridge. It is developed and
-tested using a VIA EPIA 5000 board.
-
-Cyblafb - compiled into the kernel or as a module?
-==================================================
-
-You might compile cyblafb either as a module or compile it permanently into the
-kernel.
-
-Unless you have a real reason to do so you should not compile both vesafb and
-cyblafb permanently into the kernel. It's possible and it helps during the
-developement cycle, but it's useless and will at least block some otherwise
-usefull memory for ordinary users.
-
-Selecting Modes
-===============
-
-	Startup Mode
-	============
-
-	First of all, you might use the "vga=???" boot parameter as it is
-	documented in vesafb.txt and svga.txt. Cyblafb will detect the video
-	mode selected and will use the geometry and timings found by
-	inspecting the hardware registers.
-
-		video=cyblafb vga=0x317
-
-	Alternatively you might use a combination of the mode, ref and bpp
-	parameters. If you compiled the driver into the kernel, add something
-	like this to the kernel command line:
-
-		video=cyblafb:1280x1024,bpp=16,ref=50 ...
-
-	If you compiled the driver as a module, the same mode would be
-	selected by the following command:
-
-		modprobe cyblafb mode=1280x1024 bpp=16 ref=50 ...
-
-	None of the modes possible to select as startup modes are affected by
-	the problems described at the end of the next subsection.
-
-	For all startup modes cyblafb chooses a virtual x resolution of 2048,
-	the only exception is mode 1280x1024 in combination with 32 bpp. This
-	allows ywrap scrolling for all those modes if rotation is 0 or 2, and
-	also fast scrolling if rotation is 1 or 3. The default virtual y reso-
-	lution is 4096 for bpp == 8, 2048 for bpp==16 and 1024 for bpp == 32,
-	again with the only exception of 1280x1024 at 32 bpp.
-
-	Please do set your video memory size to 8 Mb in the Bios setup. Other
-	values will work, but performace is decreased for a lot of modes.
-
-	Mode changes using fbset
-	========================
-
-	You might use fbset to change the video mode, see "man fbset". Cyblafb
-	generally does assume that you know what you are doing. But it does
-	some checks, especially those that are needed to prevent you from
-	damaging your hardware.
-
-		- only 8, 16, 24 and 32 bpp video modes are accepted
-		- interlaced video modes are not accepted
-		- double scan video modes are not accepted
-		- if a flat panel is found, cyblafb does not allow you
-		  to program a resolution higher than the physical
-		  resolution of the flat panel monitor
-		- cyblafb does not allow vclk to exceed 230 MHz. As 32 bpp
-		  and (currently) 24 bit modes use a doubled vclk internally,
-		  the dotclock limit as seen by fbset is 115 MHz for those
-		  modes and 230 MHz for 8 and 16 bpp modes.
-		- cyblafb will allow you to select very high resolutions as
-		  long as the hardware can be programmed to these modes. The
-		  documented limit 1600x1200 is not enforced, but don't expect
-		  perfect signal quality.
-
-	Any request that violates the rules given above will be either changed
-	to something the hardware supports or an error value will be returned.
-
-	If you program a virtual y resolution higher than the hardware limit,
-	cyblafb will silently decrease that value to the highest possible
-	value. The same is true for a virtual x resolution that is not
-	supported by the hardware. Cyblafb tries to adapt vyres first because
-	vxres decides if ywrap scrolling is possible or not.
-
-	Attempts to disable acceleration are ignored, I believe that this is
-	safe.
-
-	Some video modes that should work do not work as expected. If you use
-	the standard fb.modes, fbset 640x480-60 will program that mode, but
-	you will see a vertical area, about two characters wide, with only
-	much darker characters than the other characters on the screen.
-	Cyblafb does allow that mode to be set, as it does not violate the
-	official specifications. It would need a lot of code to reliably sort
-	out all invalid modes, playing around with the margin values will
-	give a valid mode quickly. And if cyblafb would detect such an invalid
-	mode, should it silently alter the requested values or should it
-	report an error? Both options have some pros and cons. As stated
-	above, none of the startup modes are affected, and if you set
-	verbosity to 1 or higher, cyblafb will print the fbset command that
-	would be needed to program that mode using fbset.
-
-
-Other Parameters
-================
-
-
-crt		don't autodetect, assume monitor connected to
-		standard VGA connector
-
-fp		don't autodetect, assume flat panel display
-		connected to flat panel monitor interface
-
-nativex 	inform driver about native x resolution of
-		flat panel monitor connected to special
-		interface (should be autodetected)
-
-stretch 	stretch image to adapt low resolution modes to
-		higer resolutions of flat panel monitors
-		connected to special interface
-
-center		center image to adapt low resolution modes to
-		higer resolutions of flat panel monitors
-		connected to special interface
-
-memsize 	use if autodetected memsize is wrong ...
-		should never be necessary
-
-nopcirr 	disable PCI read retry
-nopciwr 	disable PCI write retry
-nopcirb 	disable PCI read bursts
-nopciwb 	disable PCI write bursts
-
-bpp		bpp for specified modes
-		valid values: 8 || 16 || 24 || 32
-
-ref		refresh rate for specified mode
-		valid values: 50 <= ref <= 85
-
-mode		640x480 or 800x600 or 1024x768 or 1280x1024
-		if not specified, the startup mode will be detected
-		and used, so you might also use the vga=??? parameter
-		described in vesafb.txt. If you do not specify a mode,
-		bpp and ref parameters are ignored.
-
-verbosity	0 is the default, increase to at least 2 for every
-		bug report!
-
-Development hints
-=================
-
-It's much faster do compile a module and to load the new version after
-unloading the old module than to compile a new kernel and to reboot. So if you
-try to work on cyblafb, it might be a good idea to use cyblafb as a module.
-In real life, fast often means dangerous, and that's also the case here. If
-you introduce a serious bug when cyblafb is compiled into the kernel, the
-kernel will lock or oops with a high probability before the file system is
-mounted, and the danger for your data is low. If you load a broken own version
-of cyblafb on a running system, the danger for the integrity of the file
-system is much higher as you might need a hard reset afterwards. Decide
-yourself.
-
-Module unloading, the vfb method
-================================
-
-If you want to unload/reload cyblafb using the virtual framebuffer, you need
-to enable vfb support in the kernel first. After that, load the modules as
-shown below:
-
-	modprobe vfb vfb_enable=1
-	modprobe fbcon
-	modprobe cyblafb
-	fbset -fb /dev/fb1 1280x1024-60 -vyres 2662
-	con2fb /dev/fb1 /dev/tty1
-	...
-
-If you now made some changes to cyblafb and want to reload it, you might do it
-as show below:
-
-	con2fb /dev/fb0 /dev/tty1
-	...
-	rmmod cyblafb
-	modprobe cyblafb
-	con2fb /dev/fb1 /dev/tty1
-	...
-
-Of course, you might choose another mode, and most certainly you also want to
-map some other /dev/tty* to the real framebuffer device. You might also choose
-to compile fbcon as a kernel module or place it permanently in the kernel.
-
-I do not know of any way to unload fbcon, and fbcon will prevent the
-framebuffer device loaded first from unloading. [If there is a way, then
-please add a description here!]
-
-Module unloading, the vesafb method
-===================================
-
-Configure the kernel:
-
-	<*> Support for frame buffer devices
-	[*]   VESA VGA graphics support
-	<M>   Cyberblade/i1 support
-
-Add e.g. "video=vesafb:ypan vga=0x307" to the kernel parameters. The ypan
-parameter is important, choose any vga parameter you like as long as it is
-a graphics mode.
-
-After booting, load cyblafb without any mode and bpp parameter and assign
-cyblafb to individual ttys using con2fb, e.g.:
-
-	modprobe cyblafb
-	con2fb /dev/fb1 /dev/tty1
-
-Unloading cyblafb works without problems after you assign vesafb to all
-ttys again, e.g.:
-
-	con2fb /dev/fb0 /dev/tty1
-	rmmod cyblafb
diff --git a/Documentation/fb/cyblafb/whatsnew b/Documentation/fb/cyblafb/whatsnew
deleted file mode 100644
index 76c07a26e04..00000000000
--- a/Documentation/fb/cyblafb/whatsnew
+++ /dev/null
@@ -1,29 +0,0 @@
-0.62
-====
-
-      - the vesafb parameter has been removed as I decided to allow the
-      	feature without any special parameter.
-
-      - Cyblafb does not use the vga style of panning any longer, now the
-      	"right view" register in the graphics engine IO space is used. Without
-	that change it was impossible to use all available memory, and without
-	access to all available memory it is impossible to ywrap.
-
-      - The imageblit function now uses hardware acceleration for all font
-        widths. Hardware blitting across pixel column 2048 is broken in the
-	cyberblade/i1 graphics core, but we work around that hardware bug.
-
-      - modes with vxres != xres are supported now.
-
-      - ywrap scrolling is supported now and the default. This is a big
-        performance gain.
-
-      - default video modes use vyres > yres and vxres > xres to allow
-        almost optimal scrolling speed for normal and rotated screens
-
-      - some features mainly usefull for debugging the upper layers of the
-        framebuffer system have been added, have a look at the code
-
-      - fixed: Oops after unloading cyblafb when reading /proc/io*
-
-      - we work around some bugs of the higher framebuffer layers.
diff --git a/Documentation/fb/cyblafb/whycyblafb b/Documentation/fb/cyblafb/whycyblafb
deleted file mode 100644
index a123bc11e69..00000000000
--- a/Documentation/fb/cyblafb/whycyblafb
+++ /dev/null
@@ -1,85 +0,0 @@
-I tried the following framebuffer drivers:
-
-	- TRIDENTFB is full of bugs. Acceleration is broken for Blade3D
-	  graphics cores like the cyberblade/i1. It claims to support a great
-	  number of devices, but documentation for most of these devices is
-	  unfortunately not available. There is _no_ reason to use tridentfb
-	  for cyberblade/i1 + CRT users. VESAFB is faster, and the one
-	  advantage, mode switching, is broken in tridentfb.
-
-	- VESAFB is used by many distributions as a standard. Vesafb does
-	  not support mode switching. VESAFB is a bit faster than the working
-	  configurations of TRIDENTFB, but it is still too slow, even if you
-	  use ypan.
-
-	- EPIAFB (you'll find it on sourceforge) supports the Cyberblade/i1
-	  graphics core, but it still has serious bugs and developement seems
-	  to have stopped. This is the one driver with TV-out support. If you
-	  do need this feature, try epiafb.
-
-None of these drivers was a real option for me.
-
-I believe that is unreasonable to change code that announces to support 20
-devices if I only have more or less sufficient documentation for exactly one
-of these. The risk of breaking device foo while fixing device bar is too high.
-
-So I decided to start CyBlaFB as a stripped down tridentfb.
-
-All code specific to other Trident chips has been removed. After that there
-were a lot of cosmetic changes to increase the readability of the code. All
-register names were changed to those mnemonics used in the datasheet. Function
-and macro names were changed if they hindered easy understanding of the code.
-
-After that I debugged the code and implemented some new features. I'll try to
-give a little summary of the main changes:
-
-	- calculation of vertical and horizontal timings was fixed
-
-	- video signal quality has been improved dramatically
-
-	- acceleration:
-
-		- fillrect and copyarea were fixed and reenabled
-
-		- color expanding imageblit was newly implemented, color
-		  imageblit (only used to draw the penguine) still uses the
-		  generic code.
-
-		- init of the acceleration engine was improved and moved to a
-		  place where it really works ...
-
-		- sync function has a timeout now and tries to reset and
-		  reinit the accel engine if necessary
-
-		- fewer slow copyarea calls when doing ypan scrolling by using
-		  undocumented bit d21 of screen start address stored in
-		  CR2B[5]. BIOS does use it also, so this should be safe.
-
-	- cyblafb rejects any attempt to set modes that would cause vclk
-	  values above reasonable 230 MHz. 32bit modes use a clock
-	  multiplicator of 2, so fbset does show the correct values for
-	  pixclock but not for vclk in this case. The fbset limit is 115 MHz
-	  for 32 bpp modes.
-
-	- cyblafb rejects modes known to be broken or unimplemented (all
-	  interlaced modes, all doublescan modes for now)
-
-	- cyblafb now works independant of the video mode in effect at startup
-	  time (tridentfb does not init all needed registers to reasonable
-	  values)
-
-	- switching between video modes does work reliably now
-
-	- the first video mode now is the one selected on startup using the
-	  vga=???? mechanism or any of
-		- 640x480, 800x600, 1024x768, 1280x1024
-		- 8, 16, 24 or 32 bpp
-		- refresh between 50 Hz and 85 Hz, 1 Hz steps (1280x1024-32
-		  is limited to 63Hz)
-
-	- pci retry and pci burst mode are settable (try to disable if you
-	  experience latency problems)
-
-	- built as a module cyblafb might be unloaded and reloaded using
-	  the vfb module and con2vt or might be used together with vesafb
-
diff --git a/Documentation/fb/uvesafb.txt b/Documentation/fb/uvesafb.txt
index 7ac3c4078ff..eefdd91d298 100644
--- a/Documentation/fb/uvesafb.txt
+++ b/Documentation/fb/uvesafb.txt
@@ -59,7 +59,8 @@ Accepted options:
 ypan    Enable display panning using the VESA protected mode
         interface.  The visible screen is just a window of the
         video memory, console scrolling is done by changing the
-        start of the window.  Available on x86 only.
+        start of the window.  This option is available on x86
+        only and is the default option on that architecture.
 
 ywrap   Same as ypan, but assumes your gfx board can wrap-around
         the video memory (i.e. starts reading from top if it
@@ -67,7 +68,7 @@ ywrap   Same as ypan, but assumes your gfx board can wrap-around
         Available on x86 only.
 
 redraw  Scroll by redrawing the affected part of the screen, this
-        is the safe (and slow) default.
+        is the default on non-x86.
 
 (If you're using uvesafb as a module, the above three options are
  used a parameter of the scroll option, e.g. scroll=ypan.)
@@ -182,7 +183,7 @@ from the Video BIOS if you set pixclock to 0 in fb_var_screeninfo.
 
 --
  Michal Januszewski <spock@gentoo.org>
- Last updated: 2007-06-16
+ Last updated: 2009-03-30
 
  Documentation of the uvesafb options is loosely based on vesafb.txt.
 
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 5ddbe350487..7e2af10e826 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -6,20 +6,47 @@ be removed from this file.
 
 ---------------------------
 
-What:	old static regulatory information and ieee80211_regdom module parameter
-When:	2.6.29
+What:	The ieee80211_regdom module parameter
+When:	March 2010 / desktop catchup
+
+Why:	This was inherited by the CONFIG_WIRELESS_OLD_REGULATORY code,
+	and currently serves as an option for users to define an
+	ISO / IEC 3166 alpha2 code for the country they are currently
+	present in. Although there are userspace API replacements for this
+	through nl80211 distributions haven't yet caught up with implementing
+	decent alternatives through standard GUIs. Although available as an
+	option through iw or wpa_supplicant its just a matter of time before
+	distributions pick up good GUI options for this. The ideal solution
+	would actually consist of intelligent designs which would do this for
+	the user automatically even when travelling through different countries.
+	Until then we leave this module parameter as a compromise.
+
+	When userspace improves with reasonable widely-available alternatives for
+	this we will no longer need this module parameter. This entry hopes that
+	by the super-futuristically looking date of "March 2010" we will have
+	such replacements widely available.
+
+Who:	Luis R. Rodriguez <lrodriguez@atheros.com>
+
+---------------------------
+
+What:	CONFIG_WIRELESS_OLD_REGULATORY - old static regulatory information
+When:	March 2010 / desktop catchup
+
 Why:	The old regulatory infrastructure has been replaced with a new one
 	which does not require statically defined regulatory domains. We do
 	not want to keep static regulatory domains in the kernel due to the
 	the dynamic nature of regulatory law and localization. We kept around
 	the old static definitions for the regulatory domains of:
+
 		* US
 		* JP
 		* EU
+
 	and used by default the US when CONFIG_WIRELESS_OLD_REGULATORY was
-	set. We also kept around the ieee80211_regdom module parameter in case
-	some applications were relying on it. Changing regulatory domains
-	can now be done instead by using nl80211, as is done with iw.
+	set. We will remove this option once the standard Linux desktop catches
+	up with the new userspace APIs we have implemented.
+
 Who:	Luis R. Rodriguez <lrodriguez@atheros.com>
 
 ---------------------------
@@ -37,10 +64,10 @@ Who:	Pavel Machek <pavel@suse.cz>
 
 ---------------------------
 
-What:	Video4Linux API 1 ioctls and video_decoder.h from Video devices.
-When:	December 2008
-Files:	include/linux/video_decoder.h include/linux/videodev.h
-Check:	include/linux/video_decoder.h include/linux/videodev.h
+What:	Video4Linux API 1 ioctls and from Video devices.
+When:	July 2009
+Files:	include/linux/videodev.h
+Check:	include/linux/videodev.h
 Why:	V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6
 	series. The old API have lots of drawbacks and don't provide enough
 	means to work with all video and audio standards. The newer API is
@@ -228,8 +255,20 @@ Who:	Jan Engelhardt <jengelh@computergmbh.de>
 
 ---------------------------
 
+What:	GPIO autorequest on gpio_direction_{input,output}() in gpiolib
+When:	February 2010
+Why:	All callers should use explicit gpio_request()/gpio_free().
+	The autorequest mechanism in gpiolib was provided mostly as a
+	migration aid for legacy GPIO interfaces (for SOC based GPIOs).
+	Those users have now largely migrated.  Platforms implementing
+	the GPIO interfaces without using gpiolib will see no changes.
+Who:	David Brownell <dbrownell@users.sourceforge.net>
+---------------------------
+
 What:	b43 support for firmware revision < 410
-When:	July 2008
+When:	The schedule was July 2008, but it was decided that we are going to keep the
+        code as long as there are no major maintanance headaches.
+	So it _could_ be removed _any_ time now, if it conflicts with something new.
 Why:	The support code for the old firmware hurts code readability/maintainability
 	and slightly hurts runtime performance. Bugfixes for the old firmware
 	are not provided by Broadcom anymore.
@@ -244,13 +283,6 @@ Who:	Glauber Costa <gcosta@redhat.com>
 
 ---------------------------
 
-What:	remove HID compat support
-When:	2.6.29
-Why:	needed only as a temporary solution until distros fix themselves up
-Who:	Jiri Slaby <jirislaby@gmail.com>
-
----------------------------
-
 What: print_fn_descriptor_symbol()
 When: October 2009
 Why:  The %pF vsprintf format provides the same functionality in a
@@ -282,6 +314,18 @@ Who:	Vlad Yasevich <vladislav.yasevich@hp.com>
 
 ---------------------------
 
+What:	Ability for non root users to shm_get hugetlb pages based on mlock
+	resource limits
+When:	2.6.31
+Why:	Non root users need to be part of /proc/sys/vm/hugetlb_shm_group or
+	have CAP_IPC_LOCK to be able to allocate shm segments backed by
+	huge pages.  The mlock based rlimit check to allow shm hugetlb is
+	inconsistent with mmap based allocations.  Hence it is being
+	deprecated.
+Who:	Ravikiran Thirumalai <kiran@scalex86.org>
+
+---------------------------
+
 What:	CONFIG_THERMAL_HWMON
 When:	January 2009
 Why:	This option was introduced just to allow older lm-sensors userspace
@@ -310,8 +354,10 @@ Who:  Krzysztof Piotr Oledzki <ole@ans.pl>
 
 ---------------------------
 
-What:	i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client()
-When:	2.6.29 (ideally) or 2.6.30 (more likely)
+What:	i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client(),
+	i2c_adapter->client_register(), i2c_adapter->client_unregister
+When:	2.6.30
+Check:	i2c_attach_client i2c_detach_client
 Why:	Deprecated by the new (standard) device driver binding model. Use
 	i2c_driver->probe() and ->remove() instead.
 Who:	Jean Delvare <khali@linux-fr.org>
@@ -326,12 +372,59 @@ Who:	Hans de Goede <hdegoede@redhat.com>
 
 ---------------------------
 
-What:	SELinux "compat_net" functionality
-When:	2.6.30 at the earliest
-Why:	In 2.6.18 the Secmark concept was introduced to replace the "compat_net"
-	network access control functionality of SELinux.  Secmark offers both
-	better performance and greater flexibility than the "compat_net"
-	mechanism.  Now that the major Linux distributions have moved to
-	Secmark, it is time to deprecate the older mechanism and start the
-	process of removing the old code.
-Who:	Paul Moore <paul.moore@hp.com>
+What:	sysfs ui for changing p4-clockmod parameters
+When:	September 2009
+Why:	See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+	e088e4c9cdb618675874becb91b2fd581ee707e6.
+	Removal is subject to fixing any remaining bugs in ACPI which may
+	cause the thermal throttling not to happen at the right time.
+Who:	Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
+
+-----------------------------
+
+What:	__do_IRQ all in one fits nothing interrupt handler
+When:	2.6.32
+Why:	__do_IRQ was kept for easy migration to the type flow handlers.
+	More than two years of migration time is enough.
+Who:	Thomas Gleixner <tglx@linutronix.de>
+
+-----------------------------
+
+What:	obsolete generic irq defines and typedefs
+When:	2.6.30
+Why:	The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t)
+	have been kept around for migration reasons. After more than two years
+	it's time to remove them finally
+Who:	Thomas Gleixner <tglx@linutronix.de>
+
+---------------------------
+
+What:	fakephp and associated sysfs files in /sys/bus/pci/slots/
+When:	2011
+Why:	In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
+	represent a machine's physical PCI slots. The change in semantics
+	had userspace implications, as the hotplug core no longer allowed
+	drivers to create multiple sysfs files per physical slot (required
+	for multi-function devices, e.g.). fakephp was seen as a developer's
+	tool only, and its interface changed. Too late, we learned that
+	there were some users of the fakephp interface.
+
+	In 2.6.30, the original fakephp interface was restored. At the same
+	time, the PCI core gained the ability that fakephp provided, namely
+	function-level hot-remove and hot-add.
+
+	Since the PCI core now provides the same functionality, exposed in:
+
+		/sys/bus/pci/rescan
+		/sys/bus/pci/devices/.../remove
+		/sys/bus/pci/devices/.../rescan
+
+	there is no functional reason to maintain fakephp as well.
+
+	We will keep the existing module so that 'modprobe fakephp' will
+	present the old /sys/bus/pci/slots/... interface for compatibility,
+	but users are urged to migrate their applications to the API above.
+
+	After a reasonable transition period, we will remove the legacy
+	fakephp interface.
+Who:	Alex Chiang <achiang@hp.com>
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index 52cd611277a..8dd6db76171 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -68,6 +68,8 @@ ncpfs.txt
 	- info on Novell Netware(tm) filesystem using NCP protocol.
 nfsroot.txt
 	- short guide on setting up a diskless box with NFS root filesystem.
+nilfs2.txt
+	- info and mount options for the NILFS2 filesystem.
 ntfs.txt
 	- info and mount options for the NTFS filesystem (Windows NT).
 ocfs2.txt
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index ec6a9392a17..76efe5b71d7 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -437,8 +437,11 @@ grab BKL for cases when we close a file that had been opened r/w, but that
 can and should be done using the internal locking with smaller critical areas).
 Current worst offender is ext2_get_block()...
 
-->fasync() is a mess. This area needs a big cleanup and that will probably
-affect locking.
+->fasync() is called without BKL protection, and is responsible for
+maintaining the FASYNC bit in filp->f_flags.  Most instances call
+fasync_helper(), which does that maintenance, so it's not normally
+something one needs to worry about.  Return values > 0 will be mapped to
+zero in the VFS layer.
 
 ->readdir() and ->ioctl() on directories must be changed. Ideally we would
 move ->readdir() to inode_operations and use a separate method for directory
@@ -502,7 +505,7 @@ prototypes:
 	void (*open)(struct vm_area_struct*);
 	void (*close)(struct vm_area_struct*);
 	int (*fault)(struct vm_area_struct*, struct vm_fault *);
-	int (*page_mkwrite)(struct vm_area_struct *, struct page *);
+	int (*page_mkwrite)(struct vm_area_struct *, struct vm_fault *);
 	int (*access)(struct vm_area_struct *, unsigned long, void*, int, int);
 
 locking rules:
diff --git a/Documentation/filesystems/caching/backend-api.txt b/Documentation/filesystems/caching/backend-api.txt
new file mode 100644
index 00000000000..382d52cdaf2
--- /dev/null
+++ b/Documentation/filesystems/caching/backend-api.txt
@@ -0,0 +1,658 @@
+			  ==========================
+			  FS-CACHE CACHE BACKEND API
+			  ==========================
+
+The FS-Cache system provides an API by which actual caches can be supplied to
+FS-Cache for it to then serve out to network filesystems and other interested
+parties.
+
+This API is declared in <linux/fscache-cache.h>.
+
+
+====================================
+INITIALISING AND REGISTERING A CACHE
+====================================
+
+To start off, a cache definition must be initialised and registered for each
+cache the backend wants to make available.  For instance, CacheFS does this in
+the fill_super() operation on mounting.
+
+The cache definition (struct fscache_cache) should be initialised by calling:
+
+	void fscache_init_cache(struct fscache_cache *cache,
+				struct fscache_cache_ops *ops,
+				const char *idfmt,
+				...);
+
+Where:
+
+ (*) "cache" is a pointer to the cache definition;
+
+ (*) "ops" is a pointer to the table of operations that the backend supports on
+     this cache; and
+
+ (*) "idfmt" is a format and printf-style arguments for constructing a label
+     for the cache.
+
+
+The cache should then be registered with FS-Cache by passing a pointer to the
+previously initialised cache definition to:
+
+	int fscache_add_cache(struct fscache_cache *cache,
+			      struct fscache_object *fsdef,
+			      const char *tagname);
+
+Two extra arguments should also be supplied:
+
+ (*) "fsdef" which should point to the object representation for the FS-Cache
+     master index in this cache.  Netfs primary index entries will be created
+     here.  FS-Cache keeps the caller's reference to the index object if
+     successful and will release it upon withdrawal of the cache.
+
+ (*) "tagname" which, if given, should be a text string naming this cache.  If
+     this is NULL, the identifier will be used instead.  For CacheFS, the
+     identifier is set to name the underlying block device and the tag can be
+     supplied by mount.
+
+This function may return -ENOMEM if it ran out of memory or -EEXIST if the tag
+is already in use.  0 will be returned on success.
+
+
+=====================
+UNREGISTERING A CACHE
+=====================
+
+A cache can be withdrawn from the system by calling this function with a
+pointer to the cache definition:
+
+	void fscache_withdraw_cache(struct fscache_cache *cache);
+
+In CacheFS's case, this is called by put_super().
+
+
+========
+SECURITY
+========
+
+The cache methods are executed one of two contexts:
+
+ (1) that of the userspace process that issued the netfs operation that caused
+     the cache method to be invoked, or
+
+ (2) that of one of the processes in the FS-Cache thread pool.
+
+In either case, this may not be an appropriate context in which to access the
+cache.
+
+The calling process's fsuid, fsgid and SELinux security identities may need to
+be masqueraded for the duration of the cache driver's access to the cache.
+This is left to the cache to handle; FS-Cache makes no effort in this regard.
+
+
+===================================
+CONTROL AND STATISTICS PRESENTATION
+===================================
+
+The cache may present data to the outside world through FS-Cache's interfaces
+in sysfs and procfs - the former for control and the latter for statistics.
+
+A sysfs directory called /sys/fs/fscache/<cachetag>/ is created if CONFIG_SYSFS
+is enabled.  This is accessible through the kobject struct fscache_cache::kobj
+and is for use by the cache as it sees fit.
+
+
+========================
+RELEVANT DATA STRUCTURES
+========================
+
+ (*) Index/Data file FS-Cache representation cookie:
+
+	struct fscache_cookie {
+		struct fscache_object_def	*def;
+		struct fscache_netfs		*netfs;
+		void				*netfs_data;
+		...
+	};
+
+     The fields that might be of use to the backend describe the object
+     definition, the netfs definition and the netfs's data for this cookie.
+     The object definition contain functions supplied by the netfs for loading
+     and matching index entries; these are required to provide some of the
+     cache operations.
+
+
+ (*) In-cache object representation:
+
+	struct fscache_object {
+		int				debug_id;
+		enum {
+			FSCACHE_OBJECT_RECYCLING,
+			...
+		}				state;
+		spinlock_t			lock
+		struct fscache_cache		*cache;
+		struct fscache_cookie		*cookie;
+		...
+	};
+
+     Structures of this type should be allocated by the cache backend and
+     passed to FS-Cache when requested by the appropriate cache operation.  In
+     the case of CacheFS, they're embedded in CacheFS's internal object
+     structures.
+
+     The debug_id is a simple integer that can be used in debugging messages
+     that refer to a particular object.  In such a case it should be printed
+     using "OBJ%x" to be consistent with FS-Cache.
+
+     Each object contains a pointer to the cookie that represents the object it
+     is backing.  An object should retired when put_object() is called if it is
+     in state FSCACHE_OBJECT_RECYCLING.  The fscache_object struct should be
+     initialised by calling fscache_object_init(object).
+
+
+ (*) FS-Cache operation record:
+
+	struct fscache_operation {
+		atomic_t		usage;
+		struct fscache_object	*object;
+		unsigned long		flags;
+	#define FSCACHE_OP_EXCLUSIVE
+		void (*processor)(struct fscache_operation *op);
+		void (*release)(struct fscache_operation *op);
+		...
+	};
+
+     FS-Cache has a pool of threads that it uses to give CPU time to the
+     various asynchronous operations that need to be done as part of driving
+     the cache.  These are represented by the above structure.  The processor
+     method is called to give the op CPU time, and the release method to get
+     rid of it when its usage count reaches 0.
+
+     An operation can be made exclusive upon an object by setting the
+     appropriate flag before enqueuing it with fscache_enqueue_operation().  If
+     an operation needs more processing time, it should be enqueued again.
+
+
+ (*) FS-Cache retrieval operation record:
+
+	struct fscache_retrieval {
+		struct fscache_operation op;
+		struct address_space	*mapping;
+		struct list_head	*to_do;
+		...
+	};
+
+     A structure of this type is allocated by FS-Cache to record retrieval and
+     allocation requests made by the netfs.  This struct is then passed to the
+     backend to do the operation.  The backend may get extra refs to it by
+     calling fscache_get_retrieval() and refs may be discarded by calling
+     fscache_put_retrieval().
+
+     A retrieval operation can be used by the backend to do retrieval work.  To
+     do this, the retrieval->op.processor method pointer should be set
+     appropriately by the backend and fscache_enqueue_retrieval() called to
+     submit it to the thread pool.  CacheFiles, for example, uses this to queue
+     page examination when it detects PG_lock being cleared.
+
+     The to_do field is an empty list available for the cache backend to use as
+     it sees fit.
+
+
+ (*) FS-Cache storage operation record:
+
+	struct fscache_storage {
+		struct fscache_operation op;
+		pgoff_t			store_limit;
+		...
+	};
+
+     A structure of this type is allocated by FS-Cache to record outstanding
+     writes to be made.  FS-Cache itself enqueues this operation and invokes
+     the write_page() method on the object at appropriate times to effect
+     storage.
+
+
+================
+CACHE OPERATIONS
+================
+
+The cache backend provides FS-Cache with a table of operations that can be
+performed on the denizens of the cache.  These are held in a structure of type:
+
+	struct fscache_cache_ops
+
+ (*) Name of cache provider [mandatory]:
+
+	const char *name
+
+     This isn't strictly an operation, but should be pointed at a string naming
+     the backend.
+
+
+ (*) Allocate a new object [mandatory]:
+
+	struct fscache_object *(*alloc_object)(struct fscache_cache *cache,
+					       struct fscache_cookie *cookie)
+
+     This method is used to allocate a cache object representation to back a
+     cookie in a particular cache.  fscache_object_init() should be called on
+     the object to initialise it prior to returning.
+
+     This function may also be used to parse the index key to be used for
+     multiple lookup calls to turn it into a more convenient form.  FS-Cache
+     will call the lookup_complete() method to allow the cache to release the
+     form once lookup is complete or aborted.
+
+
+ (*) Look up and create object [mandatory]:
+
+	void (*lookup_object)(struct fscache_object *object)
+
+     This method is used to look up an object, given that the object is already
+     allocated and attached to the cookie.  This should instantiate that object
+     in the cache if it can.
+
+     The method should call fscache_object_lookup_negative() as soon as
+     possible if it determines the object doesn't exist in the cache.  If the
+     object is found to exist and the netfs indicates that it is valid then
+     fscache_obtained_object() should be called once the object is in a
+     position to have data stored in it.  Similarly, fscache_obtained_object()
+     should also be called once a non-present object has been created.
+
+     If a lookup error occurs, fscache_object_lookup_error() should be called
+     to abort the lookup of that object.
+
+
+ (*) Release lookup data [mandatory]:
+
+	void (*lookup_complete)(struct fscache_object *object)
+
+     This method is called to ask the cache to release any resources it was
+     using to perform a lookup.
+
+
+ (*) Increment object refcount [mandatory]:
+
+	struct fscache_object *(*grab_object)(struct fscache_object *object)
+
+     This method is called to increment the reference count on an object.  It
+     may fail (for instance if the cache is being withdrawn) by returning NULL.
+     It should return the object pointer if successful.
+
+
+ (*) Lock/Unlock object [mandatory]:
+
+	void (*lock_object)(struct fscache_object *object)
+	void (*unlock_object)(struct fscache_object *object)
+
+     These methods are used to exclusively lock an object.  It must be possible
+     to schedule with the lock held, so a spinlock isn't sufficient.
+
+
+ (*) Pin/Unpin object [optional]:
+
+	int (*pin_object)(struct fscache_object *object)
+	void (*unpin_object)(struct fscache_object *object)
+
+     These methods are used to pin an object into the cache.  Once pinned an
+     object cannot be reclaimed to make space.  Return -ENOSPC if there's not
+     enough space in the cache to permit this.
+
+
+ (*) Update object [mandatory]:
+
+	int (*update_object)(struct fscache_object *object)
+
+     This is called to update the index entry for the specified object.  The
+     new information should be in object->cookie->netfs_data.  This can be
+     obtained by calling object->cookie->def->get_aux()/get_attr().
+
+
+ (*) Discard object [mandatory]:
+
+	void (*drop_object)(struct fscache_object *object)
+
+     This method is called to indicate that an object has been unbound from its
+     cookie, and that the cache should release the object's resources and
+     retire it if it's in state FSCACHE_OBJECT_RECYCLING.
+
+     This method should not attempt to release any references held by the
+     caller.  The caller will invoke the put_object() method as appropriate.
+
+
+ (*) Release object reference [mandatory]:
+
+	void (*put_object)(struct fscache_object *object)
+
+     This method is used to discard a reference to an object.  The object may
+     be freed when all the references to it are released.
+
+
+ (*) Synchronise a cache [mandatory]:
+
+	void (*sync)(struct fscache_cache *cache)
+
+     This is called to ask the backend to synchronise a cache with its backing
+     device.
+
+
+ (*) Dissociate a cache [mandatory]:
+
+	void (*dissociate_pages)(struct fscache_cache *cache)
+
+     This is called to ask a cache to perform any page dissociations as part of
+     cache withdrawal.
+
+
+ (*) Notification that the attributes on a netfs file changed [mandatory]:
+
+	int (*attr_changed)(struct fscache_object *object);
+
+     This is called to indicate to the cache that certain attributes on a netfs
+     file have changed (for example the maximum size a file may reach).  The
+     cache can read these from the netfs by calling the cookie's get_attr()
+     method.
+
+     The cache may use the file size information to reserve space on the cache.
+     It should also call fscache_set_store_limit() to indicate to FS-Cache the
+     highest byte it's willing to store for an object.
+
+     This method may return -ve if an error occurred or the cache object cannot
+     be expanded.  In such a case, the object will be withdrawn from service.
+
+     This operation is run asynchronously from FS-Cache's thread pool, and
+     storage and retrieval operations from the netfs are excluded during the
+     execution of this operation.
+
+
+ (*) Reserve cache space for an object's data [optional]:
+
+	int (*reserve_space)(struct fscache_object *object, loff_t size);
+
+     This is called to request that cache space be reserved to hold the data
+     for an object and the metadata used to track it.  Zero size should be
+     taken as request to cancel a reservation.
+
+     This should return 0 if successful, -ENOSPC if there isn't enough space
+     available, or -ENOMEM or -EIO on other errors.
+
+     The reservation may exceed the current size of the object, thus permitting
+     future expansion.  If the amount of space consumed by an object would
+     exceed the reservation, it's permitted to refuse requests to allocate
+     pages, but not required.  An object may be pruned down to its reservation
+     size if larger than that already.
+
+
+ (*) Request page be read from cache [mandatory]:
+
+	int (*read_or_alloc_page)(struct fscache_retrieval *op,
+				  struct page *page,
+				  gfp_t gfp)
+
+     This is called to attempt to read a netfs page from the cache, or to
+     reserve a backing block if not.  FS-Cache will have done as much checking
+     as it can before calling, but most of the work belongs to the backend.
+
+     If there's no page in the cache, then -ENODATA should be returned if the
+     backend managed to reserve a backing block; -ENOBUFS or -ENOMEM if it
+     didn't.
+
+     If there is suitable data in the cache, then a read operation should be
+     queued and 0 returned.  When the read finishes, fscache_end_io() should be
+     called.
+
+     The fscache_mark_pages_cached() should be called for the page if any cache
+     metadata is retained.  This will indicate to the netfs that the page needs
+     explicit uncaching.  This operation takes a pagevec, thus allowing several
+     pages to be marked at once.
+
+     The retrieval record pointed to by op should be retained for each page
+     queued and released when I/O on the page has been formally ended.
+     fscache_get/put_retrieval() are available for this purpose.
+
+     The retrieval record may be used to get CPU time via the FS-Cache thread
+     pool.  If this is desired, the op->op.processor should be set to point to
+     the appropriate processing routine, and fscache_enqueue_retrieval() should
+     be called at an appropriate point to request CPU time.  For instance, the
+     retrieval routine could be enqueued upon the completion of a disk read.
+     The to_do field in the retrieval record is provided to aid in this.
+
+     If an I/O error occurs, fscache_io_error() should be called and -ENOBUFS
+     returned if possible or fscache_end_io() called with a suitable error
+     code..
+
+
+ (*) Request pages be read from cache [mandatory]:
+
+	int (*read_or_alloc_pages)(struct fscache_retrieval *op,
+				   struct list_head *pages,
+				   unsigned *nr_pages,
+				   gfp_t gfp)
+
+     This is like the read_or_alloc_page() method, except it is handed a list
+     of pages instead of one page.  Any pages on which a read operation is
+     started must be added to the page cache for the specified mapping and also
+     to the LRU.  Such pages must also be removed from the pages list and
+     *nr_pages decremented per page.
+
+     If there was an error such as -ENOMEM, then that should be returned; else
+     if one or more pages couldn't be read or allocated, then -ENOBUFS should
+     be returned; else if one or more pages couldn't be read, then -ENODATA
+     should be returned.  If all the pages are dispatched then 0 should be
+     returned.
+
+
+ (*) Request page be allocated in the cache [mandatory]:
+
+	int (*allocate_page)(struct fscache_retrieval *op,
+			     struct page *page,
+			     gfp_t gfp)
+
+     This is like the read_or_alloc_page() method, except that it shouldn't
+     read from the cache, even if there's data there that could be retrieved.
+     It should, however, set up any internal metadata required such that
+     the write_page() method can write to the cache.
+
+     If there's no backing block available, then -ENOBUFS should be returned
+     (or -ENOMEM if there were other problems).  If a block is successfully
+     allocated, then the netfs page should be marked and 0 returned.
+
+
+ (*) Request pages be allocated in the cache [mandatory]:
+
+	int (*allocate_pages)(struct fscache_retrieval *op,
+			      struct list_head *pages,
+			      unsigned *nr_pages,
+			      gfp_t gfp)
+
+     This is an multiple page version of the allocate_page() method.  pages and
+     nr_pages should be treated as for the read_or_alloc_pages() method.
+
+
+ (*) Request page be written to cache [mandatory]:
+
+	int (*write_page)(struct fscache_storage *op,
+			  struct page *page);
+
+     This is called to write from a page on which there was a previously
+     successful read_or_alloc_page() call or similar.  FS-Cache filters out
+     pages that don't have mappings.
+
+     This method is called asynchronously from the FS-Cache thread pool.  It is
+     not required to actually store anything, provided -ENODATA is then
+     returned to the next read of this page.
+
+     If an error occurred, then a negative error code should be returned,
+     otherwise zero should be returned.  FS-Cache will take appropriate action
+     in response to an error, such as withdrawing this object.
+
+     If this method returns success then FS-Cache will inform the netfs
+     appropriately.
+
+
+ (*) Discard retained per-page metadata [mandatory]:
+
+	void (*uncache_page)(struct fscache_object *object, struct page *page)
+
+     This is called when a netfs page is being evicted from the pagecache.  The
+     cache backend should tear down any internal representation or tracking it
+     maintains for this page.
+
+
+==================
+FS-CACHE UTILITIES
+==================
+
+FS-Cache provides some utilities that a cache backend may make use of:
+
+ (*) Note occurrence of an I/O error in a cache:
+
+	void fscache_io_error(struct fscache_cache *cache)
+
+     This tells FS-Cache that an I/O error occurred in the cache.  After this
+     has been called, only resource dissociation operations (object and page
+     release) will be passed from the netfs to the cache backend for the
+     specified cache.
+
+     This does not actually withdraw the cache.  That must be done separately.
+
+
+ (*) Invoke the retrieval I/O completion function:
+
+	void fscache_end_io(struct fscache_retrieval *op, struct page *page,
+			    int error);
+
+     This is called to note the end of an attempt to retrieve a page.  The
+     error value should be 0 if successful and an error otherwise.
+
+
+ (*) Set highest store limit:
+
+	void fscache_set_store_limit(struct fscache_object *object,
+				     loff_t i_size);
+
+     This sets the limit FS-Cache imposes on the highest byte it's willing to
+     try and store for a netfs.  Any page over this limit is automatically
+     rejected by fscache_read_alloc_page() and co with -ENOBUFS.
+
+
+ (*) Mark pages as being cached:
+
+	void fscache_mark_pages_cached(struct fscache_retrieval *op,
+				       struct pagevec *pagevec);
+
+     This marks a set of pages as being cached.  After this has been called,
+     the netfs must call fscache_uncache_page() to unmark the pages.
+
+
+ (*) Perform coherency check on an object:
+
+	enum fscache_checkaux fscache_check_aux(struct fscache_object *object,
+						const void *data,
+						uint16_t datalen);
+
+     This asks the netfs to perform a coherency check on an object that has
+     just been looked up.  The cookie attached to the object will determine the
+     netfs to use.  data and datalen should specify where the auxiliary data
+     retrieved from the cache can be found.
+
+     One of three values will be returned:
+
+	(*) FSCACHE_CHECKAUX_OKAY
+
+	    The coherency data indicates the object is valid as is.
+
+	(*) FSCACHE_CHECKAUX_NEEDS_UPDATE
+
+	    The coherency data needs updating, but otherwise the object is
+	    valid.
+
+	(*) FSCACHE_CHECKAUX_OBSOLETE
+
+	    The coherency data indicates that the object is obsolete and should
+	    be discarded.
+
+
+ (*) Initialise a freshly allocated object:
+
+	void fscache_object_init(struct fscache_object *object);
+
+     This initialises all the fields in an object representation.
+
+
+ (*) Indicate the destruction of an object:
+
+	void fscache_object_destroyed(struct fscache_cache *cache);
+
+     This must be called to inform FS-Cache that an object that belonged to a
+     cache has been destroyed and deallocated.  This will allow continuation
+     of the cache withdrawal process when it is stopped pending destruction of
+     all the objects.
+
+
+ (*) Indicate negative lookup on an object:
+
+	void fscache_object_lookup_negative(struct fscache_object *object);
+
+     This is called to indicate to FS-Cache that a lookup process for an object
+     found a negative result.
+
+     This changes the state of an object to permit reads pending on lookup
+     completion to go off and start fetching data from the netfs server as it's
+     known at this point that there can't be any data in the cache.
+
+     This may be called multiple times on an object.  Only the first call is
+     significant - all subsequent calls are ignored.
+
+
+ (*) Indicate an object has been obtained:
+
+	void fscache_obtained_object(struct fscache_object *object);
+
+     This is called to indicate to FS-Cache that a lookup process for an object
+     produced a positive result, or that an object was created.  This should
+     only be called once for any particular object.
+
+     This changes the state of an object to indicate:
+
+	(1) if no call to fscache_object_lookup_negative() has been made on
+	    this object, that there may be data available, and that reads can
+	    now go and look for it; and
+
+        (2) that writes may now proceed against this object.
+
+
+ (*) Indicate that object lookup failed:
+
+	void fscache_object_lookup_error(struct fscache_object *object);
+
+     This marks an object as having encountered a fatal error (usually EIO)
+     and causes it to move into a state whereby it will be withdrawn as soon
+     as possible.
+
+
+ (*) Get and release references on a retrieval record:
+
+	void fscache_get_retrieval(struct fscache_retrieval *op);
+	void fscache_put_retrieval(struct fscache_retrieval *op);
+
+     These two functions are used to retain a retrieval record whilst doing
+     asynchronous data retrieval and block allocation.
+
+
+ (*) Enqueue a retrieval record for processing.
+
+	void fscache_enqueue_retrieval(struct fscache_retrieval *op);
+
+     This enqueues a retrieval record for processing by the FS-Cache thread
+     pool.  One of the threads in the pool will invoke the retrieval record's
+     op->op.processor callback function.  This function may be called from
+     within the callback function.
+
+
+ (*) List of object state names:
+
+	const char *fscache_object_states[];
+
+     For debugging purposes, this may be used to turn the state that an object
+     is in into a text string for display purposes.
diff --git a/Documentation/filesystems/caching/cachefiles.txt b/Documentation/filesystems/caching/cachefiles.txt
new file mode 100644
index 00000000000..c78a49b7bba
--- /dev/null
+++ b/Documentation/filesystems/caching/cachefiles.txt
@@ -0,0 +1,501 @@
+	       ===============================================
+	       CacheFiles: CACHE ON ALREADY MOUNTED FILESYSTEM
+	       ===============================================
+
+Contents:
+
+ (*) Overview.
+
+ (*) Requirements.
+
+ (*) Configuration.
+
+ (*) Starting the cache.
+
+ (*) Things to avoid.
+
+ (*) Cache culling.
+
+ (*) Cache structure.
+
+ (*) Security model and SELinux.
+
+ (*) A note on security.
+
+ (*) Statistical information.
+
+ (*) Debugging.
+
+
+========
+OVERVIEW
+========
+
+CacheFiles is a caching backend that's meant to use as a cache a directory on
+an already mounted filesystem of a local type (such as Ext3).
+
+CacheFiles uses a userspace daemon to do some of the cache management - such as
+reaping stale nodes and culling.  This is called cachefilesd and lives in
+/sbin.
+
+The filesystem and data integrity of the cache are only as good as those of the
+filesystem providing the backing services.  Note that CacheFiles does not
+attempt to journal anything since the journalling interfaces of the various
+filesystems are very specific in nature.
+
+CacheFiles creates a misc character device - "/dev/cachefiles" - that is used
+to communication with the daemon.  Only one thing may have this open at once,
+and whilst it is open, a cache is at least partially in existence.  The daemon
+opens this and sends commands down it to control the cache.
+
+CacheFiles is currently limited to a single cache.
+
+CacheFiles attempts to maintain at least a certain percentage of free space on
+the filesystem, shrinking the cache by culling the objects it contains to make
+space if necessary - see the "Cache Culling" section.  This means it can be
+placed on the same medium as a live set of data, and will expand to make use of
+spare space and automatically contract when the set of data requires more
+space.
+
+
+============
+REQUIREMENTS
+============
+
+The use of CacheFiles and its daemon requires the following features to be
+available in the system and in the cache filesystem:
+
+	- dnotify.
+
+	- extended attributes (xattrs).
+
+	- openat() and friends.
+
+	- bmap() support on files in the filesystem (FIBMAP ioctl).
+
+	- The use of bmap() to detect a partial page at the end of the file.
+
+It is strongly recommended that the "dir_index" option is enabled on Ext3
+filesystems being used as a cache.
+
+
+=============
+CONFIGURATION
+=============
+
+The cache is configured by a script in /etc/cachefilesd.conf.  These commands
+set up cache ready for use.  The following script commands are available:
+
+ (*) brun <N>%
+ (*) bcull <N>%
+ (*) bstop <N>%
+ (*) frun <N>%
+ (*) fcull <N>%
+ (*) fstop <N>%
+
+	Configure the culling limits.  Optional.  See the section on culling
+	The defaults are 7% (run), 5% (cull) and 1% (stop) respectively.
+
+	The commands beginning with a 'b' are file space (block) limits, those
+	beginning with an 'f' are file count limits.
+
+ (*) dir <path>
+
+	Specify the directory containing the root of the cache.  Mandatory.
+
+ (*) tag <name>
+
+	Specify a tag to FS-Cache to use in distinguishing multiple caches.
+	Optional.  The default is "CacheFiles".
+
+ (*) debug <mask>
+
+	Specify a numeric bitmask to control debugging in the kernel module.
+	Optional.  The default is zero (all off).  The following values can be
+	OR'd into the mask to collect various information:
+
+		1	Turn on trace of function entry (_enter() macros)
+		2	Turn on trace of function exit (_leave() macros)
+		4	Turn on trace of internal debug points (_debug())
+
+	This mask can also be set through sysfs, eg:
+
+		echo 5 >/sys/modules/cachefiles/parameters/debug
+
+
+==================
+STARTING THE CACHE
+==================
+
+The cache is started by running the daemon.  The daemon opens the cache device,
+configures the cache and tells it to begin caching.  At that point the cache
+binds to fscache and the cache becomes live.
+
+The daemon is run as follows:
+
+	/sbin/cachefilesd [-d]* [-s] [-n] [-f <configfile>]
+
+The flags are:
+
+ (*) -d
+
+	Increase the debugging level.  This can be specified multiple times and
+	is cumulative with itself.
+
+ (*) -s
+
+	Send messages to stderr instead of syslog.
+
+ (*) -n
+
+	Don't daemonise and go into background.
+
+ (*) -f <configfile>
+
+	Use an alternative configuration file rather than the default one.
+
+
+===============
+THINGS TO AVOID
+===============
+
+Do not mount other things within the cache as this will cause problems.  The
+kernel module contains its own very cut-down path walking facility that ignores
+mountpoints, but the daemon can't avoid them.
+
+Do not create, rename or unlink files and directories in the cache whilst the
+cache is active, as this may cause the state to become uncertain.
+
+Renaming files in the cache might make objects appear to be other objects (the
+filename is part of the lookup key).
+
+Do not change or remove the extended attributes attached to cache files by the
+cache as this will cause the cache state management to get confused.
+
+Do not create files or directories in the cache, lest the cache get confused or
+serve incorrect data.
+
+Do not chmod files in the cache.  The module creates things with minimal
+permissions to prevent random users being able to access them directly.
+
+
+=============
+CACHE CULLING
+=============
+
+The cache may need culling occasionally to make space.  This involves
+discarding objects from the cache that have been used less recently than
+anything else.  Culling is based on the access time of data objects.  Empty
+directories are culled if not in use.
+
+Cache culling is done on the basis of the percentage of blocks and the
+percentage of files available in the underlying filesystem.  There are six
+"limits":
+
+ (*) brun
+ (*) frun
+
+     If the amount of free space and the number of available files in the cache
+     rises above both these limits, then culling is turned off.
+
+ (*) bcull
+ (*) fcull
+
+     If the amount of available space or the number of available files in the
+     cache falls below either of these limits, then culling is started.
+
+ (*) bstop
+ (*) fstop
+
+     If the amount of available space or the number of available files in the
+     cache falls below either of these limits, then no further allocation of
+     disk space or files is permitted until culling has raised things above
+     these limits again.
+
+These must be configured thusly:
+
+	0 <= bstop < bcull < brun < 100
+	0 <= fstop < fcull < frun < 100
+
+Note that these are percentages of available space and available files, and do
+_not_ appear as 100 minus the percentage displayed by the "df" program.
+
+The userspace daemon scans the cache to build up a table of cullable objects.
+These are then culled in least recently used order.  A new scan of the cache is
+started as soon as space is made in the table.  Objects will be skipped if
+their atimes have changed or if the kernel module says it is still using them.
+
+
+===============
+CACHE STRUCTURE
+===============
+
+The CacheFiles module will create two directories in the directory it was
+given:
+
+ (*) cache/
+
+ (*) graveyard/
+
+The active cache objects all reside in the first directory.  The CacheFiles
+kernel module moves any retired or culled objects that it can't simply unlink
+to the graveyard from which the daemon will actually delete them.
+
+The daemon uses dnotify to monitor the graveyard directory, and will delete
+anything that appears therein.
+
+
+The module represents index objects as directories with the filename "I..." or
+"J...".  Note that the "cache/" directory is itself a special index.
+
+Data objects are represented as files if they have no children, or directories
+if they do.  Their filenames all begin "D..." or "E...".  If represented as a
+directory, data objects will have a file in the directory called "data" that
+actually holds the data.
+
+Special objects are similar to data objects, except their filenames begin
+"S..." or "T...".
+
+
+If an object has children, then it will be represented as a directory.
+Immediately in the representative directory are a collection of directories
+named for hash values of the child object keys with an '@' prepended.  Into
+this directory, if possible, will be placed the representations of the child
+objects:
+
+	INDEX     INDEX      INDEX                             DATA FILES
+	========= ========== ================================= ================
+	cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400
+	cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...DB1ry
+	cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...N22ry
+	cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...FP1ry
+
+
+If the key is so long that it exceeds NAME_MAX with the decorations added on to
+it, then it will be cut into pieces, the first few of which will be used to
+make a nest of directories, and the last one of which will be the objects
+inside the last directory.  The names of the intermediate directories will have
+'+' prepended:
+
+	J1223/@23/+xy...z/+kl...m/Epqr
+
+
+Note that keys are raw data, and not only may they exceed NAME_MAX in size,
+they may also contain things like '/' and NUL characters, and so they may not
+be suitable for turning directly into a filename.
+
+To handle this, CacheFiles will use a suitably printable filename directly and
+"base-64" encode ones that aren't directly suitable.  The two versions of
+object filenames indicate the encoding:
+
+	OBJECT TYPE	PRINTABLE	ENCODED
+	===============	===============	===============
+	Index		"I..."		"J..."
+	Data		"D..."		"E..."
+	Special		"S..."		"T..."
+
+Intermediate directories are always "@" or "+" as appropriate.
+
+
+Each object in the cache has an extended attribute label that holds the object
+type ID (required to distinguish special objects) and the auxiliary data from
+the netfs.  The latter is used to detect stale objects in the cache and update
+or retire them.
+
+
+Note that CacheFiles will erase from the cache any file it doesn't recognise or
+any file of an incorrect type (such as a FIFO file or a device file).
+
+
+==========================
+SECURITY MODEL AND SELINUX
+==========================
+
+CacheFiles is implemented to deal properly with the LSM security features of
+the Linux kernel and the SELinux facility.
+
+One of the problems that CacheFiles faces is that it is generally acting on
+behalf of a process, and running in that process's context, and that includes a
+security context that is not appropriate for accessing the cache - either
+because the files in the cache are inaccessible to that process, or because if
+the process creates a file in the cache, that file may be inaccessible to other
+processes.
+
+The way CacheFiles works is to temporarily change the security context (fsuid,
+fsgid and actor security label) that the process acts as - without changing the
+security context of the process when it the target of an operation performed by
+some other process (so signalling and suchlike still work correctly).
+
+
+When the CacheFiles module is asked to bind to its cache, it:
+
+ (1) Finds the security label attached to the root cache directory and uses
+     that as the security label with which it will create files.  By default,
+     this is:
+
+	cachefiles_var_t
+
+ (2) Finds the security label of the process which issued the bind request
+     (presumed to be the cachefilesd daemon), which by default will be:
+
+	cachefilesd_t
+
+     and asks LSM to supply a security ID as which it should act given the
+     daemon's label.  By default, this will be:
+
+	cachefiles_kernel_t
+
+     SELinux transitions the daemon's security ID to the module's security ID
+     based on a rule of this form in the policy.
+
+	type_transition <daemon's-ID> kernel_t : process <module's-ID>;
+
+     For instance:
+
+	type_transition cachefilesd_t kernel_t : process cachefiles_kernel_t;
+
+
+The module's security ID gives it permission to create, move and remove files
+and directories in the cache, to find and access directories and files in the
+cache, to set and access extended attributes on cache objects, and to read and
+write files in the cache.
+
+The daemon's security ID gives it only a very restricted set of permissions: it
+may scan directories, stat files and erase files and directories.  It may
+not read or write files in the cache, and so it is precluded from accessing the
+data cached therein; nor is it permitted to create new files in the cache.
+
+
+There are policy source files available in:
+
+	http://people.redhat.com/~dhowells/fscache/cachefilesd-0.8.tar.bz2
+
+and later versions.  In that tarball, see the files:
+
+	cachefilesd.te
+	cachefilesd.fc
+	cachefilesd.if
+
+They are built and installed directly by the RPM.
+
+If a non-RPM based system is being used, then copy the above files to their own
+directory and run:
+
+	make -f /usr/share/selinux/devel/Makefile
+	semodule -i cachefilesd.pp
+
+You will need checkpolicy and selinux-policy-devel installed prior to the
+build.
+
+
+By default, the cache is located in /var/fscache, but if it is desirable that
+it should be elsewhere, than either the above policy files must be altered, or
+an auxiliary policy must be installed to label the alternate location of the
+cache.
+
+For instructions on how to add an auxiliary policy to enable the cache to be
+located elsewhere when SELinux is in enforcing mode, please see:
+
+	/usr/share/doc/cachefilesd-*/move-cache.txt
+
+When the cachefilesd rpm is installed; alternatively, the document can be found
+in the sources.
+
+
+==================
+A NOTE ON SECURITY
+==================
+
+CacheFiles makes use of the split security in the task_struct.  It allocates
+its own task_security structure, and redirects current->act_as to point to it
+when it acts on behalf of another process, in that process's context.
+
+The reason it does this is that it calls vfs_mkdir() and suchlike rather than
+bypassing security and calling inode ops directly.  Therefore the VFS and LSM
+may deny the CacheFiles access to the cache data because under some
+circumstances the caching code is running in the security context of whatever
+process issued the original syscall on the netfs.
+
+Furthermore, should CacheFiles create a file or directory, the security
+parameters with that object is created (UID, GID, security label) would be
+derived from that process that issued the system call, thus potentially
+preventing other processes from accessing the cache - including CacheFiles's
+cache management daemon (cachefilesd).
+
+What is required is to temporarily override the security of the process that
+issued the system call.  We can't, however, just do an in-place change of the
+security data as that affects the process as an object, not just as a subject.
+This means it may lose signals or ptrace events for example, and affects what
+the process looks like in /proc.
+
+So CacheFiles makes use of a logical split in the security between the
+objective security (task->sec) and the subjective security (task->act_as).  The
+objective security holds the intrinsic security properties of a process and is
+never overridden.  This is what appears in /proc, and is what is used when a
+process is the target of an operation by some other process (SIGKILL for
+example).
+
+The subjective security holds the active security properties of a process, and
+may be overridden.  This is not seen externally, and is used whan a process
+acts upon another object, for example SIGKILLing another process or opening a
+file.
+
+LSM hooks exist that allow SELinux (or Smack or whatever) to reject a request
+for CacheFiles to run in a context of a specific security label, or to create
+files and directories with another security label.
+
+
+=======================
+STATISTICAL INFORMATION
+=======================
+
+If FS-Cache is compiled with the following option enabled:
+
+	CONFIG_CACHEFILES_HISTOGRAM=y
+
+then it will gather certain statistics and display them through a proc file.
+
+ (*) /proc/fs/cachefiles/histogram
+
+	cat /proc/fs/cachefiles/histogram
+	JIFS  SECS  LOOKUPS   MKDIRS    CREATES
+	===== ===== ========= ========= =========
+
+     This shows the breakdown of the number of times each amount of time
+     between 0 jiffies and HZ-1 jiffies a variety of tasks took to run.  The
+     columns are as follows:
+
+	COLUMN		TIME MEASUREMENT
+	=======		=======================================================
+	LOOKUPS		Length of time to perform a lookup on the backing fs
+	MKDIRS		Length of time to perform a mkdir on the backing fs
+	CREATES		Length of time to perform a create on the backing fs
+
+     Each row shows the number of events that took a particular range of times.
+     Each step is 1 jiffy in size.  The JIFS column indicates the particular
+     jiffy range covered, and the SECS field the equivalent number of seconds.
+
+
+=========
+DEBUGGING
+=========
+
+If CONFIG_CACHEFILES_DEBUG is enabled, the CacheFiles facility can have runtime
+debugging enabled by adjusting the value in:
+
+	/sys/module/cachefiles/parameters/debug
+
+This is a bitmask of debugging streams to enable:
+
+	BIT	VALUE	STREAM				POINT
+	=======	=======	===============================	=======================
+	0	1	General				Function entry trace
+	1	2					Function exit trace
+	2	4					General
+
+The appropriate set of values should be OR'd together and the result written to
+the control file.  For example:
+
+	echo $((1|4|8)) >/sys/module/cachefiles/parameters/debug
+
+will turn on all function entry debugging.
diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt
new file mode 100644
index 00000000000..9e94b9491d8
--- /dev/null
+++ b/Documentation/filesystems/caching/fscache.txt
@@ -0,0 +1,333 @@
+			  ==========================
+			  General Filesystem Caching
+			  ==========================
+
+========
+OVERVIEW
+========
+
+This facility is a general purpose cache for network filesystems, though it
+could be used for caching other things such as ISO9660 filesystems too.
+
+FS-Cache mediates between cache backends (such as CacheFS) and network
+filesystems:
+
+	+---------+
+	|         |                        +--------------+
+	|   NFS   |--+                     |              |
+	|         |  |                 +-->|   CacheFS    |
+	+---------+  |   +----------+  |   |  /dev/hda5   |
+	             |   |          |  |   +--------------+
+	+---------+  +-->|          |  |
+	|         |      |          |--+
+	|   AFS   |----->| FS-Cache |
+	|         |      |          |--+
+	+---------+  +-->|          |  |
+	             |   |          |  |   +--------------+
+	+---------+  |   +----------+  |   |              |
+	|         |  |                 +-->|  CacheFiles  |
+	|  ISOFS  |--+                     |  /var/cache  |
+	|         |                        +--------------+
+	+---------+
+
+Or to look at it another way, FS-Cache is a module that provides a caching
+facility to a network filesystem such that the cache is transparent to the
+user:
+
+	+---------+
+	|         |
+	| Server  |
+	|         |
+	+---------+
+	     |                  NETWORK
+	~~~~~|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	     |
+	     |           +----------+
+	     V           |          |
+	+---------+      |          |
+	|         |      |          |
+	|   NFS   |----->| FS-Cache |
+	|         |      |          |--+
+	+---------+      |          |  |   +--------------+   +--------------+
+	     |           |          |  |   |              |   |              |
+	     V           +----------+  +-->|  CacheFiles  |-->|  Ext3        |
+	+---------+                        |  /var/cache  |   |  /dev/sda6   |
+	|         |                        +--------------+   +--------------+
+	|   VFS   |                                ^                     ^
+	|         |                                |                     |
+	+---------+                                +--------------+      |
+	     |                  KERNEL SPACE                      |      |
+	~~~~~|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|~~~~~~|~~~~
+	     |                  USER SPACE                        |      |
+	     V                                                    |      |
+	+---------+                                           +--------------+
+	|         |                                           |              |
+	| Process |                                           | cachefilesd  |
+	|         |                                           |              |
+	+---------+                                           +--------------+
+
+
+FS-Cache does not follow the idea of completely loading every netfs file
+opened in its entirety into a cache before permitting it to be accessed and
+then serving the pages out of that cache rather than the netfs inode because:
+
+ (1) It must be practical to operate without a cache.
+
+ (2) The size of any accessible file must not be limited to the size of the
+     cache.
+
+ (3) The combined size of all opened files (this includes mapped libraries)
+     must not be limited to the size of the cache.
+
+ (4) The user should not be forced to download an entire file just to do a
+     one-off access of a small portion of it (such as might be done with the
+     "file" program).
+
+It instead serves the cache out in PAGE_SIZE chunks as and when requested by
+the netfs('s) using it.
+
+
+FS-Cache provides the following facilities:
+
+ (1) More than one cache can be used at once.  Caches can be selected
+     explicitly by use of tags.
+
+ (2) Caches can be added / removed at any time.
+
+ (3) The netfs is provided with an interface that allows either party to
+     withdraw caching facilities from a file (required for (2)).
+
+ (4) The interface to the netfs returns as few errors as possible, preferring
+     rather to let the netfs remain oblivious.
+
+ (5) Cookies are used to represent indices, files and other objects to the
+     netfs.  The simplest cookie is just a NULL pointer - indicating nothing
+     cached there.
+
+ (6) The netfs is allowed to propose - dynamically - any index hierarchy it
+     desires, though it must be aware that the index search function is
+     recursive, stack space is limited, and indices can only be children of
+     indices.
+
+ (7) Data I/O is done direct to and from the netfs's pages.  The netfs
+     indicates that page A is at index B of the data-file represented by cookie
+     C, and that it should be read or written.  The cache backend may or may
+     not start I/O on that page, but if it does, a netfs callback will be
+     invoked to indicate completion.  The I/O may be either synchronous or
+     asynchronous.
+
+ (8) Cookies can be "retired" upon release.  At this point FS-Cache will mark
+     them as obsolete and the index hierarchy rooted at that point will get
+     recycled.
+
+ (9) The netfs provides a "match" function for index searches.  In addition to
+     saying whether a match was made or not, this can also specify that an
+     entry should be updated or deleted.
+
+(10) As much as possible is done asynchronously.
+
+
+FS-Cache maintains a virtual indexing tree in which all indices, files, objects
+and pages are kept.  Bits of this tree may actually reside in one or more
+caches.
+
+                                           FSDEF
+                                             |
+                        +------------------------------------+
+                        |                                    |
+                       NFS                                  AFS
+                        |                                    |
+           +--------------------------+                +-----------+
+           |                          |                |           |
+        homedir                     mirror          afs.org   redhat.com
+           |                          |                            |
+     +------------+           +---------------+              +----------+
+     |            |           |               |              |          |
+   00001        00002       00007           00125        vol00001   vol00002
+     |            |           |               |                         |
+ +---+---+     +-----+      +---+      +------+------+            +-----+----+
+ |   |   |     |     |      |   |      |      |      |            |     |    |
+PG0 PG1 PG2   PG0  XATTR   PG0 PG1   DIRENT DIRENT DIRENT        R/W   R/O  Bak
+                     |                                            |
+                    PG0                                       +-------+
+                                                              |       |
+                                                            00001   00003
+                                                              |
+                                                          +---+---+
+                                                          |   |   |
+                                                         PG0 PG1 PG2
+
+In the example above, you can see two netfs's being backed: NFS and AFS.  These
+have different index hierarchies:
+
+ (*) The NFS primary index contains per-server indices.  Each server index is
+     indexed by NFS file handles to get data file objects.  Each data file
+     objects can have an array of pages, but may also have further child
+     objects, such as extended attributes and directory entries.  Extended
+     attribute objects themselves have page-array contents.
+
+ (*) The AFS primary index contains per-cell indices.  Each cell index contains
+     per-logical-volume indices.  Each of volume index contains up to three
+     indices for the read-write, read-only and backup mirrors of those volumes.
+     Each of these contains vnode data file objects, each of which contains an
+     array of pages.
+
+The very top index is the FS-Cache master index in which individual netfs's
+have entries.
+
+Any index object may reside in more than one cache, provided it only has index
+children.  Any index with non-index object children will be assumed to only
+reside in one cache.
+
+
+The netfs API to FS-Cache can be found in:
+
+	Documentation/filesystems/caching/netfs-api.txt
+
+The cache backend API to FS-Cache can be found in:
+
+	Documentation/filesystems/caching/backend-api.txt
+
+A description of the internal representations and object state machine can be
+found in:
+
+	Documentation/filesystems/caching/object.txt
+
+
+=======================
+STATISTICAL INFORMATION
+=======================
+
+If FS-Cache is compiled with the following options enabled:
+
+	CONFIG_FSCACHE_STATS=y
+	CONFIG_FSCACHE_HISTOGRAM=y
+
+then it will gather certain statistics and display them through a number of
+proc files.
+
+ (*) /proc/fs/fscache/stats
+
+     This shows counts of a number of events that can happen in FS-Cache:
+
+	CLASS	EVENT	MEANING
+	=======	=======	=======================================================
+	Cookies	idx=N	Number of index cookies allocated
+		dat=N	Number of data storage cookies allocated
+		spc=N	Number of special cookies allocated
+	Objects	alc=N	Number of objects allocated
+		nal=N	Number of object allocation failures
+		avl=N	Number of objects that reached the available state
+		ded=N	Number of objects that reached the dead state
+	ChkAux	non=N	Number of objects that didn't have a coherency check
+		ok=N	Number of objects that passed a coherency check
+		upd=N	Number of objects that needed a coherency data update
+		obs=N	Number of objects that were declared obsolete
+	Pages	mrk=N	Number of pages marked as being cached
+		unc=N	Number of uncache page requests seen
+	Acquire	n=N	Number of acquire cookie requests seen
+		nul=N	Number of acq reqs given a NULL parent
+		noc=N	Number of acq reqs rejected due to no cache available
+		ok=N	Number of acq reqs succeeded
+		nbf=N	Number of acq reqs rejected due to error
+		oom=N	Number of acq reqs failed on ENOMEM
+	Lookups	n=N	Number of lookup calls made on cache backends
+		neg=N	Number of negative lookups made
+		pos=N	Number of positive lookups made
+		crt=N	Number of objects created by lookup
+	Updates	n=N	Number of update cookie requests seen
+		nul=N	Number of upd reqs given a NULL parent
+		run=N	Number of upd reqs granted CPU time
+	Relinqs	n=N	Number of relinquish cookie requests seen
+		nul=N	Number of rlq reqs given a NULL parent
+		wcr=N	Number of rlq reqs waited on completion of creation
+	AttrChg	n=N	Number of attribute changed requests seen
+		ok=N	Number of attr changed requests queued
+		nbf=N	Number of attr changed rejected -ENOBUFS
+		oom=N	Number of attr changed failed -ENOMEM
+		run=N	Number of attr changed ops given CPU time
+	Allocs	n=N	Number of allocation requests seen
+		ok=N	Number of successful alloc reqs
+		wt=N	Number of alloc reqs that waited on lookup completion
+		nbf=N	Number of alloc reqs rejected -ENOBUFS
+		ops=N	Number of alloc reqs submitted
+		owt=N	Number of alloc reqs waited for CPU time
+	Retrvls	n=N	Number of retrieval (read) requests seen
+		ok=N	Number of successful retr reqs
+		wt=N	Number of retr reqs that waited on lookup completion
+		nod=N	Number of retr reqs returned -ENODATA
+		nbf=N	Number of retr reqs rejected -ENOBUFS
+		int=N	Number of retr reqs aborted -ERESTARTSYS
+		oom=N	Number of retr reqs failed -ENOMEM
+		ops=N	Number of retr reqs submitted
+		owt=N	Number of retr reqs waited for CPU time
+	Stores	n=N	Number of storage (write) requests seen
+		ok=N	Number of successful store reqs
+		agn=N	Number of store reqs on a page already pending storage
+		nbf=N	Number of store reqs rejected -ENOBUFS
+		oom=N	Number of store reqs failed -ENOMEM
+		ops=N	Number of store reqs submitted
+		run=N	Number of store reqs granted CPU time
+	Ops	pend=N	Number of times async ops added to pending queues
+		run=N	Number of times async ops given CPU time
+		enq=N	Number of times async ops queued for processing
+		dfr=N	Number of async ops queued for deferred release
+		rel=N	Number of async ops released
+		gc=N	Number of deferred-release async ops garbage collected
+
+
+ (*) /proc/fs/fscache/histogram
+
+	cat /proc/fs/fscache/histogram
+	JIFS  SECS  OBJ INST  OP RUNS   OBJ RUNS  RETRV DLY RETRIEVLS
+	===== ===== ========= ========= ========= ========= =========
+
+     This shows the breakdown of the number of times each amount of time
+     between 0 jiffies and HZ-1 jiffies a variety of tasks took to run.  The
+     columns are as follows:
+
+	COLUMN		TIME MEASUREMENT
+	=======		=======================================================
+	OBJ INST	Length of time to instantiate an object
+	OP RUNS		Length of time a call to process an operation took
+	OBJ RUNS	Length of time a call to process an object event took
+	RETRV DLY	Time between an requesting a read and lookup completing
+	RETRIEVLS	Time between beginning and end of a retrieval
+
+     Each row shows the number of events that took a particular range of times.
+     Each step is 1 jiffy in size.  The JIFS column indicates the particular
+     jiffy range covered, and the SECS field the equivalent number of seconds.
+
+
+=========
+DEBUGGING
+=========
+
+If CONFIG_FSCACHE_DEBUG is enabled, the FS-Cache facility can have runtime
+debugging enabled by adjusting the value in:
+
+	/sys/module/fscache/parameters/debug
+
+This is a bitmask of debugging streams to enable:
+
+	BIT	VALUE	STREAM				POINT
+	=======	=======	===============================	=======================
+	0	1	Cache management		Function entry trace
+	1	2					Function exit trace
+	2	4					General
+	3	8	Cookie management		Function entry trace
+	4	16					Function exit trace
+	5	32					General
+	6	64	Page handling			Function entry trace
+	7	128					Function exit trace
+	8	256					General
+	9	512	Operation management		Function entry trace
+	10	1024					Function exit trace
+	11	2048					General
+
+The appropriate set of values should be OR'd together and the result written to
+the control file.  For example:
+
+	echo $((1|8|64)) >/sys/module/fscache/parameters/debug
+
+will turn on all function entry debugging.
diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt
new file mode 100644
index 00000000000..4db125b3a5c
--- /dev/null
+++ b/Documentation/filesystems/caching/netfs-api.txt
@@ -0,0 +1,778 @@
+			===============================
+			FS-CACHE NETWORK FILESYSTEM API
+			===============================
+
+There's an API by which a network filesystem can make use of the FS-Cache
+facilities.  This is based around a number of principles:
+
+ (1) Caches can store a number of different object types.  There are two main
+     object types: indices and files.  The first is a special type used by
+     FS-Cache to make finding objects faster and to make retiring of groups of
+     objects easier.
+
+ (2) Every index, file or other object is represented by a cookie.  This cookie
+     may or may not have anything associated with it, but the netfs doesn't
+     need to care.
+
+ (3) Barring the top-level index (one entry per cached netfs), the index
+     hierarchy for each netfs is structured according the whim of the netfs.
+
+This API is declared in <linux/fscache.h>.
+
+This document contains the following sections:
+
+	 (1) Network filesystem definition
+	 (2) Index definition
+	 (3) Object definition
+	 (4) Network filesystem (un)registration
+	 (5) Cache tag lookup
+	 (6) Index registration
+	 (7) Data file registration
+	 (8) Miscellaneous object registration
+	 (9) Setting the data file size
+	(10) Page alloc/read/write
+	(11) Page uncaching
+	(12) Index and data file update
+	(13) Miscellaneous cookie operations
+	(14) Cookie unregistration
+	(15) Index and data file invalidation
+	(16) FS-Cache specific page flags.
+
+
+=============================
+NETWORK FILESYSTEM DEFINITION
+=============================
+
+FS-Cache needs a description of the network filesystem.  This is specified
+using a record of the following structure:
+
+	struct fscache_netfs {
+		uint32_t			version;
+		const char			*name;
+		struct fscache_cookie		*primary_index;
+		...
+	};
+
+This first two fields should be filled in before registration, and the third
+will be filled in by the registration function; any other fields should just be
+ignored and are for internal use only.
+
+The fields are:
+
+ (1) The name of the netfs (used as the key in the toplevel index).
+
+ (2) The version of the netfs (if the name matches but the version doesn't, the
+     entire in-cache hierarchy for this netfs will be scrapped and begun
+     afresh).
+
+ (3) The cookie representing the primary index will be allocated according to
+     another parameter passed into the registration function.
+
+For example, kAFS (linux/fs/afs/) uses the following definitions to describe
+itself:
+
+	struct fscache_netfs afs_cache_netfs = {
+		.version	= 0,
+		.name		= "afs",
+	};
+
+
+================
+INDEX DEFINITION
+================
+
+Indices are used for two purposes:
+
+ (1) To aid the finding of a file based on a series of keys (such as AFS's
+     "cell", "volume ID", "vnode ID").
+
+ (2) To make it easier to discard a subset of all the files cached based around
+     a particular key - for instance to mirror the removal of an AFS volume.
+
+However, since it's unlikely that any two netfs's are going to want to define
+their index hierarchies in quite the same way, FS-Cache tries to impose as few
+restraints as possible on how an index is structured and where it is placed in
+the tree.  The netfs can even mix indices and data files at the same level, but
+it's not recommended.
+
+Each index entry consists of a key of indeterminate length plus some auxilliary
+data, also of indeterminate length.
+
+There are some limits on indices:
+
+ (1) Any index containing non-index objects should be restricted to a single
+     cache.  Any such objects created within an index will be created in the
+     first cache only.  The cache in which an index is created can be
+     controlled by cache tags (see below).
+
+ (2) The entry data must be atomically journallable, so it is limited to about
+     400 bytes at present.  At least 400 bytes will be available.
+
+ (3) The depth of the index tree should be judged with care as the search
+     function is recursive.  Too many layers will run the kernel out of stack.
+
+
+=================
+OBJECT DEFINITION
+=================
+
+To define an object, a structure of the following type should be filled out:
+
+	struct fscache_cookie_def
+	{
+		uint8_t name[16];
+		uint8_t type;
+
+		struct fscache_cache_tag *(*select_cache)(
+			const void *parent_netfs_data,
+			const void *cookie_netfs_data);
+
+		uint16_t (*get_key)(const void *cookie_netfs_data,
+				    void *buffer,
+				    uint16_t bufmax);
+
+		void (*get_attr)(const void *cookie_netfs_data,
+				 uint64_t *size);
+
+		uint16_t (*get_aux)(const void *cookie_netfs_data,
+				    void *buffer,
+				    uint16_t bufmax);
+
+		enum fscache_checkaux (*check_aux)(void *cookie_netfs_data,
+						   const void *data,
+						   uint16_t datalen);
+
+		void (*get_context)(void *cookie_netfs_data, void *context);
+
+		void (*put_context)(void *cookie_netfs_data, void *context);
+
+		void (*mark_pages_cached)(void *cookie_netfs_data,
+					  struct address_space *mapping,
+					  struct pagevec *cached_pvec);
+
+		void (*now_uncached)(void *cookie_netfs_data);
+	};
+
+This has the following fields:
+
+ (1) The type of the object [mandatory].
+
+     This is one of the following values:
+
+	(*) FSCACHE_COOKIE_TYPE_INDEX
+
+	    This defines an index, which is a special FS-Cache type.
+
+	(*) FSCACHE_COOKIE_TYPE_DATAFILE
+
+	    This defines an ordinary data file.
+
+	(*) Any other value between 2 and 255
+
+	    This defines an extraordinary object such as an XATTR.
+
+ (2) The name of the object type (NUL terminated unless all 16 chars are used)
+     [optional].
+
+ (3) A function to select the cache in which to store an index [optional].
+
+     This function is invoked when an index needs to be instantiated in a cache
+     during the instantiation of a non-index object.  Only the immediate index
+     parent for the non-index object will be queried.  Any indices above that
+     in the hierarchy may be stored in multiple caches.  This function does not
+     need to be supplied for any non-index object or any index that will only
+     have index children.
+
+     If this function is not supplied or if it returns NULL then the first
+     cache in the parent's list will be chosed, or failing that, the first
+     cache in the master list.
+
+ (4) A function to retrieve an object's key from the netfs [mandatory].
+
+     This function will be called with the netfs data that was passed to the
+     cookie acquisition function and the maximum length of key data that it may
+     provide.  It should write the required key data into the given buffer and
+     return the quantity it wrote.
+
+ (5) A function to retrieve attribute data from the netfs [optional].
+
+     This function will be called with the netfs data that was passed to the
+     cookie acquisition function.  It should return the size of the file if
+     this is a data file.  The size may be used to govern how much cache must
+     be reserved for this file in the cache.
+
+     If the function is absent, a file size of 0 is assumed.
+
+ (6) A function to retrieve auxilliary data from the netfs [optional].
+
+     This function will be called with the netfs data that was passed to the
+     cookie acquisition function and the maximum length of auxilliary data that
+     it may provide.  It should write the auxilliary data into the given buffer
+     and return the quantity it wrote.
+
+     If this function is absent, the auxilliary data length will be set to 0.
+
+     The length of the auxilliary data buffer may be dependent on the key
+     length.  A netfs mustn't rely on being able to provide more than 400 bytes
+     for both.
+
+ (7) A function to check the auxilliary data [optional].
+
+     This function will be called to check that a match found in the cache for
+     this object is valid.  For instance with AFS it could check the auxilliary
+     data against the data version number returned by the server to determine
+     whether the index entry in a cache is still valid.
+
+     If this function is absent, it will be assumed that matching objects in a
+     cache are always valid.
+
+     If present, the function should return one of the following values:
+
+	(*) FSCACHE_CHECKAUX_OKAY		- the entry is okay as is
+	(*) FSCACHE_CHECKAUX_NEEDS_UPDATE	- the entry requires update
+	(*) FSCACHE_CHECKAUX_OBSOLETE		- the entry should be deleted
+
+     This function can also be used to extract data from the auxilliary data in
+     the cache and copy it into the netfs's structures.
+
+ (8) A pair of functions to manage contexts for the completion callback
+     [optional].
+
+     The cache read/write functions are passed a context which is then passed
+     to the I/O completion callback function.  To ensure this context remains
+     valid until after the I/O completion is called, two functions may be
+     provided: one to get an extra reference on the context, and one to drop a
+     reference to it.
+
+     If the context is not used or is a type of object that won't go out of
+     scope, then these functions are not required.  These functions are not
+     required for indices as indices may not contain data.  These functions may
+     be called in interrupt context and so may not sleep.
+
+ (9) A function to mark a page as retaining cache metadata [optional].
+
+     This is called by the cache to indicate that it is retaining in-memory
+     information for this page and that the netfs should uncache the page when
+     it has finished.  This does not indicate whether there's data on the disk
+     or not.  Note that several pages at once may be presented for marking.
+
+     The PG_fscache bit is set on the pages before this function would be
+     called, so the function need not be provided if this is sufficient.
+
+     This function is not required for indices as they're not permitted data.
+
+(10) A function to unmark all the pages retaining cache metadata [mandatory].
+
+     This is called by FS-Cache to indicate that a backing store is being
+     unbound from a cookie and that all the marks on the pages should be
+     cleared to prevent confusion.  Note that the cache will have torn down all
+     its tracking information so that the pages don't need to be explicitly
+     uncached.
+
+     This function is not required for indices as they're not permitted data.
+
+
+===================================
+NETWORK FILESYSTEM (UN)REGISTRATION
+===================================
+
+The first step is to declare the network filesystem to the cache.  This also
+involves specifying the layout of the primary index (for AFS, this would be the
+"cell" level).
+
+The registration function is:
+
+	int fscache_register_netfs(struct fscache_netfs *netfs);
+
+It just takes a pointer to the netfs definition.  It returns 0 or an error as
+appropriate.
+
+For kAFS, registration is done as follows:
+
+	ret = fscache_register_netfs(&afs_cache_netfs);
+
+The last step is, of course, unregistration:
+
+	void fscache_unregister_netfs(struct fscache_netfs *netfs);
+
+
+================
+CACHE TAG LOOKUP
+================
+
+FS-Cache permits the use of more than one cache.  To permit particular index
+subtrees to be bound to particular caches, the second step is to look up cache
+representation tags.  This step is optional; it can be left entirely up to
+FS-Cache as to which cache should be used.  The problem with doing that is that
+FS-Cache will always pick the first cache that was registered.
+
+To get the representation for a named tag:
+
+	struct fscache_cache_tag *fscache_lookup_cache_tag(const char *name);
+
+This takes a text string as the name and returns a representation of a tag.  It
+will never return an error.  It may return a dummy tag, however, if it runs out
+of memory; this will inhibit caching with this tag.
+
+Any representation so obtained must be released by passing it to this function:
+
+	void fscache_release_cache_tag(struct fscache_cache_tag *tag);
+
+The tag will be retrieved by FS-Cache when it calls the object definition
+operation select_cache().
+
+
+==================
+INDEX REGISTRATION
+==================
+
+The third step is to inform FS-Cache about part of an index hierarchy that can
+be used to locate files.  This is done by requesting a cookie for each index in
+the path to the file:
+
+	struct fscache_cookie *
+	fscache_acquire_cookie(struct fscache_cookie *parent,
+			       const struct fscache_object_def *def,
+			       void *netfs_data);
+
+This function creates an index entry in the index represented by parent,
+filling in the index entry by calling the operations pointed to by def.
+
+Note that this function never returns an error - all errors are handled
+internally.  It may, however, return NULL to indicate no cookie.  It is quite
+acceptable to pass this token back to this function as the parent to another
+acquisition (or even to the relinquish cookie, read page and write page
+functions - see below).
+
+Note also that no indices are actually created in a cache until a non-index
+object needs to be created somewhere down the hierarchy.  Furthermore, an index
+may be created in several different caches independently at different times.
+This is all handled transparently, and the netfs doesn't see any of it.
+
+For example, with AFS, a cell would be added to the primary index.  This index
+entry would have a dependent inode containing a volume location index for the
+volume mappings within this cell:
+
+	cell->cache =
+		fscache_acquire_cookie(afs_cache_netfs.primary_index,
+				       &afs_cell_cache_index_def,
+				       cell);
+
+Then when a volume location was accessed, it would be entered into the cell's
+index and an inode would be allocated that acts as a volume type and hash chain
+combination:
+
+	vlocation->cache =
+		fscache_acquire_cookie(cell->cache,
+				       &afs_vlocation_cache_index_def,
+				       vlocation);
+
+And then a particular flavour of volume (R/O for example) could be added to
+that index, creating another index for vnodes (AFS inode equivalents):
+
+	volume->cache =
+		fscache_acquire_cookie(vlocation->cache,
+				       &afs_volume_cache_index_def,
+				       volume);
+
+
+======================
+DATA FILE REGISTRATION
+======================
+
+The fourth step is to request a data file be created in the cache.  This is
+identical to index cookie acquisition.  The only difference is that the type in
+the object definition should be something other than index type.
+
+	vnode->cache =
+		fscache_acquire_cookie(volume->cache,
+				       &afs_vnode_cache_object_def,
+				       vnode);
+
+
+=================================
+MISCELLANEOUS OBJECT REGISTRATION
+=================================
+
+An optional step is to request an object of miscellaneous type be created in
+the cache.  This is almost identical to index cookie acquisition.  The only
+difference is that the type in the object definition should be something other
+than index type.  Whilst the parent object could be an index, it's more likely
+it would be some other type of object such as a data file.
+
+	xattr->cache =
+		fscache_acquire_cookie(vnode->cache,
+				       &afs_xattr_cache_object_def,
+				       xattr);
+
+Miscellaneous objects might be used to store extended attributes or directory
+entries for example.
+
+
+==========================
+SETTING THE DATA FILE SIZE
+==========================
+
+The fifth step is to set the physical attributes of the file, such as its size.
+This doesn't automatically reserve any space in the cache, but permits the
+cache to adjust its metadata for data tracking appropriately:
+
+	int fscache_attr_changed(struct fscache_cookie *cookie);
+
+The cache will return -ENOBUFS if there is no backing cache or if there is no
+space to allocate any extra metadata required in the cache.  The attributes
+will be accessed with the get_attr() cookie definition operation.
+
+Note that attempts to read or write data pages in the cache over this size may
+be rebuffed with -ENOBUFS.
+
+This operation schedules an attribute adjustment to happen asynchronously at
+some point in the future, and as such, it may happen after the function returns
+to the caller.  The attribute adjustment excludes read and write operations.
+
+
+=====================
+PAGE READ/ALLOC/WRITE
+=====================
+
+And the sixth step is to store and retrieve pages in the cache.  There are
+three functions that are used to do this.
+
+Note:
+
+ (1) A page should not be re-read or re-allocated without uncaching it first.
+
+ (2) A read or allocated page must be uncached when the netfs page is released
+     from the pagecache.
+
+ (3) A page should only be written to the cache if previous read or allocated.
+
+This permits the cache to maintain its page tracking in proper order.
+
+
+PAGE READ
+---------
+
+Firstly, the netfs should ask FS-Cache to examine the caches and read the
+contents cached for a particular page of a particular file if present, or else
+allocate space to store the contents if not:
+
+	typedef
+	void (*fscache_rw_complete_t)(struct page *page,
+				      void *context,
+				      int error);
+
+	int fscache_read_or_alloc_page(struct fscache_cookie *cookie,
+				       struct page *page,
+				       fscache_rw_complete_t end_io_func,
+				       void *context,
+				       gfp_t gfp);
+
+The cookie argument must specify a cookie for an object that isn't an index,
+the page specified will have the data loaded into it (and is also used to
+specify the page number), and the gfp argument is used to control how any
+memory allocations made are satisfied.
+
+If the cookie indicates the inode is not cached:
+
+ (1) The function will return -ENOBUFS.
+
+Else if there's a copy of the page resident in the cache:
+
+ (1) The mark_pages_cached() cookie operation will be called on that page.
+
+ (2) The function will submit a request to read the data from the cache's
+     backing device directly into the page specified.
+
+ (3) The function will return 0.
+
+ (4) When the read is complete, end_io_func() will be invoked with:
+
+     (*) The netfs data supplied when the cookie was created.
+
+     (*) The page descriptor.
+
+     (*) The context argument passed to the above function.  This will be
+         maintained with the get_context/put_context functions mentioned above.
+
+     (*) An argument that's 0 on success or negative for an error code.
+
+     If an error occurs, it should be assumed that the page contains no usable
+     data.
+
+     end_io_func() will be called in process context if the read is results in
+     an error, but it might be called in interrupt context if the read is
+     successful.
+
+Otherwise, if there's not a copy available in cache, but the cache may be able
+to store the page:
+
+ (1) The mark_pages_cached() cookie operation will be called on that page.
+
+ (2) A block may be reserved in the cache and attached to the object at the
+     appropriate place.
+
+ (3) The function will return -ENODATA.
+
+This function may also return -ENOMEM or -EINTR, in which case it won't have
+read any data from the cache.
+
+
+PAGE ALLOCATE
+-------------
+
+Alternatively, if there's not expected to be any data in the cache for a page
+because the file has been extended, a block can simply be allocated instead:
+
+	int fscache_alloc_page(struct fscache_cookie *cookie,
+			       struct page *page,
+			       gfp_t gfp);
+
+This is similar to the fscache_read_or_alloc_page() function, except that it
+never reads from the cache.  It will return 0 if a block has been allocated,
+rather than -ENODATA as the other would.  One or the other must be performed
+before writing to the cache.
+
+The mark_pages_cached() cookie operation will be called on the page if
+successful.
+
+
+PAGE WRITE
+----------
+
+Secondly, if the netfs changes the contents of the page (either due to an
+initial download or if a user performs a write), then the page should be
+written back to the cache:
+
+	int fscache_write_page(struct fscache_cookie *cookie,
+			       struct page *page,
+			       gfp_t gfp);
+
+The cookie argument must specify a data file cookie, the page specified should
+contain the data to be written (and is also used to specify the page number),
+and the gfp argument is used to control how any memory allocations made are
+satisfied.
+
+The page must have first been read or allocated successfully and must not have
+been uncached before writing is performed.
+
+If the cookie indicates the inode is not cached then:
+
+ (1) The function will return -ENOBUFS.
+
+Else if space can be allocated in the cache to hold this page:
+
+ (1) PG_fscache_write will be set on the page.
+
+ (2) The function will submit a request to write the data to cache's backing
+     device directly from the page specified.
+
+ (3) The function will return 0.
+
+ (4) When the write is complete PG_fscache_write is cleared on the page and
+     anyone waiting for that bit will be woken up.
+
+Else if there's no space available in the cache, -ENOBUFS will be returned.  It
+is also possible for the PG_fscache_write bit to be cleared when no write took
+place if unforeseen circumstances arose (such as a disk error).
+
+Writing takes place asynchronously.
+
+
+MULTIPLE PAGE READ
+------------------
+
+A facility is provided to read several pages at once, as requested by the
+readpages() address space operation:
+
+	int fscache_read_or_alloc_pages(struct fscache_cookie *cookie,
+					struct address_space *mapping,
+					struct list_head *pages,
+					int *nr_pages,
+					fscache_rw_complete_t end_io_func,
+					void *context,
+					gfp_t gfp);
+
+This works in a similar way to fscache_read_or_alloc_page(), except:
+
+ (1) Any page it can retrieve data for is removed from pages and nr_pages and
+     dispatched for reading to the disk.  Reads of adjacent pages on disk may
+     be merged for greater efficiency.
+
+ (2) The mark_pages_cached() cookie operation will be called on several pages
+     at once if they're being read or allocated.
+
+ (3) If there was an general error, then that error will be returned.
+
+     Else if some pages couldn't be allocated or read, then -ENOBUFS will be
+     returned.
+
+     Else if some pages couldn't be read but were allocated, then -ENODATA will
+     be returned.
+
+     Otherwise, if all pages had reads dispatched, then 0 will be returned, the
+     list will be empty and *nr_pages will be 0.
+
+ (4) end_io_func will be called once for each page being read as the reads
+     complete.  It will be called in process context if error != 0, but it may
+     be called in interrupt context if there is no error.
+
+Note that a return of -ENODATA, -ENOBUFS or any other error does not preclude
+some of the pages being read and some being allocated.  Those pages will have
+been marked appropriately and will need uncaching.
+
+
+==============
+PAGE UNCACHING
+==============
+
+To uncache a page, this function should be called:
+
+	void fscache_uncache_page(struct fscache_cookie *cookie,
+				  struct page *page);
+
+This function permits the cache to release any in-memory representation it
+might be holding for this netfs page.  This function must be called once for
+each page on which the read or write page functions above have been called to
+make sure the cache's in-memory tracking information gets torn down.
+
+Note that pages can't be explicitly deleted from the a data file.  The whole
+data file must be retired (see the relinquish cookie function below).
+
+Furthermore, note that this does not cancel the asynchronous read or write
+operation started by the read/alloc and write functions, so the page
+invalidation and release functions must use:
+
+	bool fscache_check_page_write(struct fscache_cookie *cookie,
+				      struct page *page);
+
+to see if a page is being written to the cache, and:
+
+	void fscache_wait_on_page_write(struct fscache_cookie *cookie,
+					struct page *page);
+
+to wait for it to finish if it is.
+
+
+==========================
+INDEX AND DATA FILE UPDATE
+==========================
+
+To request an update of the index data for an index or other object, the
+following function should be called:
+
+	void fscache_update_cookie(struct fscache_cookie *cookie);
+
+This function will refer back to the netfs_data pointer stored in the cookie by
+the acquisition function to obtain the data to write into each revised index
+entry.  The update method in the parent index definition will be called to
+transfer the data.
+
+Note that partial updates may happen automatically at other times, such as when
+data blocks are added to a data file object.
+
+
+===============================
+MISCELLANEOUS COOKIE OPERATIONS
+===============================
+
+There are a number of operations that can be used to control cookies:
+
+ (*) Cookie pinning:
+
+	int fscache_pin_cookie(struct fscache_cookie *cookie);
+	void fscache_unpin_cookie(struct fscache_cookie *cookie);
+
+     These operations permit data cookies to be pinned into the cache and to
+     have the pinning removed.  They are not permitted on index cookies.
+
+     The pinning function will return 0 if successful, -ENOBUFS in the cookie
+     isn't backed by a cache, -EOPNOTSUPP if the cache doesn't support pinning,
+     -ENOSPC if there isn't enough space to honour the operation, -ENOMEM or
+     -EIO if there's any other problem.
+
+ (*) Data space reservation:
+
+	int fscache_reserve_space(struct fscache_cookie *cookie, loff_t size);
+
+     This permits a netfs to request cache space be reserved to store up to the
+     given amount of a file.  It is permitted to ask for more than the current
+     size of the file to allow for future file expansion.
+
+     If size is given as zero then the reservation will be cancelled.
+
+     The function will return 0 if successful, -ENOBUFS in the cookie isn't
+     backed by a cache, -EOPNOTSUPP if the cache doesn't support reservations,
+     -ENOSPC if there isn't enough space to honour the operation, -ENOMEM or
+     -EIO if there's any other problem.
+
+     Note that this doesn't pin an object in a cache; it can still be culled to
+     make space if it's not in use.
+
+
+=====================
+COOKIE UNREGISTRATION
+=====================
+
+To get rid of a cookie, this function should be called.
+
+	void fscache_relinquish_cookie(struct fscache_cookie *cookie,
+				       int retire);
+
+If retire is non-zero, then the object will be marked for recycling, and all
+copies of it will be removed from all active caches in which it is present.
+Not only that but all child objects will also be retired.
+
+If retire is zero, then the object may be available again when next the
+acquisition function is called.  Retirement here will overrule the pinning on a
+cookie.
+
+One very important note - relinquish must NOT be called for a cookie unless all
+the cookies for "child" indices, objects and pages have been relinquished
+first.
+
+
+================================
+INDEX AND DATA FILE INVALIDATION
+================================
+
+There is no direct way to invalidate an index subtree or a data file.  To do
+this, the caller should relinquish and retire the cookie they have, and then
+acquire a new one.
+
+
+===========================
+FS-CACHE SPECIFIC PAGE FLAG
+===========================
+
+FS-Cache makes use of a page flag, PG_private_2, for its own purpose.  This is
+given the alternative name PG_fscache.
+
+PG_fscache is used to indicate that the page is known by the cache, and that
+the cache must be informed if the page is going to go away.  It's an indication
+to the netfs that the cache has an interest in this page, where an interest may
+be a pointer to it, resources allocated or reserved for it, or I/O in progress
+upon it.
+
+The netfs can use this information in methods such as releasepage() to
+determine whether it needs to uncache a page or update it.
+
+Furthermore, if this bit is set, releasepage() and invalidatepage() operations
+will be called on a page to get rid of it, even if PG_private is not set.  This
+allows caching to attempted on a page before read_cache_pages() to be called
+after fscache_read_or_alloc_pages() as the former will try and release pages it
+was given under certain circumstances.
+
+This bit does not overlap with such as PG_private.  This means that FS-Cache
+can be used with a filesystem that uses the block buffering code.
+
+There are a number of operations defined on this flag:
+
+	int PageFsCache(struct page *page);
+	void SetPageFsCache(struct page *page)
+	void ClearPageFsCache(struct page *page)
+	int TestSetPageFsCache(struct page *page)
+	int TestClearPageFsCache(struct page *page)
+
+These functions are bit test, bit set, bit clear, bit test and set and bit
+test and clear operations on PG_fscache.
diff --git a/Documentation/filesystems/caching/object.txt b/Documentation/filesystems/caching/object.txt
new file mode 100644
index 00000000000..e8b0a35d8fe
--- /dev/null
+++ b/Documentation/filesystems/caching/object.txt
@@ -0,0 +1,313 @@
+	     ====================================================
+	     IN-KERNEL CACHE OBJECT REPRESENTATION AND MANAGEMENT
+	     ====================================================
+
+By: David Howells <dhowells@redhat.com>
+
+Contents:
+
+ (*) Representation
+
+ (*) Object management state machine.
+
+     - Provision of cpu time.
+     - Locking simplification.
+
+ (*) The set of states.
+
+ (*) The set of events.
+
+
+==============
+REPRESENTATION
+==============
+
+FS-Cache maintains an in-kernel representation of each object that a netfs is
+currently interested in.  Such objects are represented by the fscache_cookie
+struct and are referred to as cookies.
+
+FS-Cache also maintains a separate in-kernel representation of the objects that
+a cache backend is currently actively caching.  Such objects are represented by
+the fscache_object struct.  The cache backends allocate these upon request, and
+are expected to embed them in their own representations.  These are referred to
+as objects.
+
+There is a 1:N relationship between cookies and objects.  A cookie may be
+represented by multiple objects - an index may exist in more than one cache -
+or even by no objects (it may not be cached).
+
+Furthermore, both cookies and objects are hierarchical.  The two hierarchies
+correspond, but the cookies tree is a superset of the union of the object trees
+of multiple caches:
+
+	    NETFS INDEX TREE               :      CACHE 1     :      CACHE 2
+	                                   :                  :
+	                                   :   +-----------+  :
+	                          +----------->|  IObject  |  :
+	      +-----------+       |        :   +-----------+  :
+	      |  ICookie  |-------+        :         |        :
+	      +-----------+       |        :         |        :   +-----------+
+	            |             +------------------------------>|  IObject  |
+	            |                      :         |        :   +-----------+
+	            |                      :         V        :         |
+	            |                      :   +-----------+  :         |
+	            V             +----------->|  IObject  |  :         |
+	      +-----------+       |        :   +-----------+  :         |
+	      |  ICookie  |-------+        :         |        :         V
+	      +-----------+       |        :         |        :   +-----------+
+	            |             +------------------------------>|  IObject  |
+	      +-----+-----+                :         |        :   +-----------+
+	      |           |                :         |        :         |
+	      V           |                :         V        :         |
+	+-----------+     |                :   +-----------+  :         |
+	|  ICookie  |------------------------->|  IObject  |  :         |
+	+-----------+     |                :   +-----------+  :         |
+	      |           V                :         |        :         V
+	      |     +-----------+          :         |        :   +-----------+
+	      |     |  ICookie  |-------------------------------->|  IObject  |
+	      |     +-----------+          :         |        :   +-----------+
+	      V           |                :         V        :         |
+	+-----------+     |                :   +-----------+  :         |
+	|  DCookie  |------------------------->|  DObject  |  :         |
+	+-----------+     |                :   +-----------+  :         |
+	                  |                :                  :         |
+	          +-------+-------+        :                  :         |
+	          |               |        :                  :         |
+	          V               V        :                  :         V
+	    +-----------+   +-----------+  :                  :   +-----------+
+	    |  DCookie  |   |  DCookie  |------------------------>|  DObject  |
+	    +-----------+   +-----------+  :                  :   +-----------+
+	                                   :                  :
+
+In the above illustration, ICookie and IObject represent indices and DCookie
+and DObject represent data storage objects.  Indices may have representation in
+multiple caches, but currently, non-index objects may not.  Objects of any type
+may also be entirely unrepresented.
+
+As far as the netfs API goes, the netfs is only actually permitted to see
+pointers to the cookies.  The cookies themselves and any objects attached to
+those cookies are hidden from it.
+
+
+===============================
+OBJECT MANAGEMENT STATE MACHINE
+===============================
+
+Within FS-Cache, each active object is managed by its own individual state
+machine.  The state for an object is kept in the fscache_object struct, in
+object->state.  A cookie may point to a set of objects that are in different
+states.
+
+Each state has an action associated with it that is invoked when the machine
+wakes up in that state.  There are four logical sets of states:
+
+ (1) Preparation: states that wait for the parent objects to become ready.  The
+     representations are hierarchical, and it is expected that an object must
+     be created or accessed with respect to its parent object.
+
+ (2) Initialisation: states that perform lookups in the cache and validate
+     what's found and that create on disk any missing metadata.
+
+ (3) Normal running: states that allow netfs operations on objects to proceed
+     and that update the state of objects.
+
+ (4) Termination: states that detach objects from their netfs cookies, that
+     delete objects from disk, that handle disk and system errors and that free
+     up in-memory resources.
+
+
+In most cases, transitioning between states is in response to signalled events.
+When a state has finished processing, it will usually set the mask of events in
+which it is interested (object->event_mask) and relinquish the worker thread.
+Then when an event is raised (by calling fscache_raise_event()), if the event
+is not masked, the object will be queued for processing (by calling
+fscache_enqueue_object()).
+
+
+PROVISION OF CPU TIME
+---------------------
+
+The work to be done by the various states is given CPU time by the threads of
+the slow work facility (see Documentation/slow-work.txt).  This is used in
+preference to the workqueue facility because:
+
+ (1) Threads may be completely occupied for very long periods of time by a
+     particular work item.  These state actions may be doing sequences of
+     synchronous, journalled disk accesses (lookup, mkdir, create, setxattr,
+     getxattr, truncate, unlink, rmdir, rename).
+
+ (2) Threads may do little actual work, but may rather spend a lot of time
+     sleeping on I/O.  This means that single-threaded and 1-per-CPU-threaded
+     workqueues don't necessarily have the right numbers of threads.
+
+
+LOCKING SIMPLIFICATION
+----------------------
+
+Because only one worker thread may be operating on any particular object's
+state machine at once, this simplifies the locking, particularly with respect
+to disconnecting the netfs's representation of a cache object (fscache_cookie)
+from the cache backend's representation (fscache_object) - which may be
+requested from either end.
+
+
+=================
+THE SET OF STATES
+=================
+
+The object state machine has a set of states that it can be in.  There are
+preparation states in which the object sets itself up and waits for its parent
+object to transit to a state that allows access to its children:
+
+ (1) State FSCACHE_OBJECT_INIT.
+
+     Initialise the object and wait for the parent object to become active.  In
+     the cache, it is expected that it will not be possible to look an object
+     up from the parent object, until that parent object itself has been looked
+     up.
+
+There are initialisation states in which the object sets itself up and accesses
+disk for the object metadata:
+
+ (2) State FSCACHE_OBJECT_LOOKING_UP.
+
+     Look up the object on disk, using the parent as a starting point.
+     FS-Cache expects the cache backend to probe the cache to see whether this
+     object is represented there, and if it is, to see if it's valid (coherency
+     management).
+
+     The cache should call fscache_object_lookup_negative() to indicate lookup
+     failure for whatever reason, and should call fscache_obtained_object() to
+     indicate success.
+
+     At the completion of lookup, FS-Cache will let the netfs go ahead with
+     read operations, no matter whether the file is yet cached.  If not yet
+     cached, read operations will be immediately rejected with ENODATA until
+     the first known page is uncached - as to that point there can be no data
+     to be read out of the cache for that file that isn't currently also held
+     in the pagecache.
+
+ (3) State FSCACHE_OBJECT_CREATING.
+
+     Create an object on disk, using the parent as a starting point.  This
+     happens if the lookup failed to find the object, or if the object's
+     coherency data indicated what's on disk is out of date.  In this state,
+     FS-Cache expects the cache to create
+
+     The cache should call fscache_obtained_object() if creation completes
+     successfully, fscache_object_lookup_negative() otherwise.
+
+     At the completion of creation, FS-Cache will start processing write
+     operations the netfs has queued for an object.  If creation failed, the
+     write ops will be transparently discarded, and nothing recorded in the
+     cache.
+
+There are some normal running states in which the object spends its time
+servicing netfs requests:
+
+ (4) State FSCACHE_OBJECT_AVAILABLE.
+
+     A transient state in which pending operations are started, child objects
+     are permitted to advance from FSCACHE_OBJECT_INIT state, and temporary
+     lookup data is freed.
+
+ (5) State FSCACHE_OBJECT_ACTIVE.
+
+     The normal running state.  In this state, requests the netfs makes will be
+     passed on to the cache.
+
+ (6) State FSCACHE_OBJECT_UPDATING.
+
+     The state machine comes here to update the object in the cache from the
+     netfs's records.  This involves updating the auxiliary data that is used
+     to maintain coherency.
+
+And there are terminal states in which an object cleans itself up, deallocates
+memory and potentially deletes stuff from disk:
+
+ (7) State FSCACHE_OBJECT_LC_DYING.
+
+     The object comes here if it is dying because of a lookup or creation
+     error.  This would be due to a disk error or system error of some sort.
+     Temporary data is cleaned up, and the parent is released.
+
+ (8) State FSCACHE_OBJECT_DYING.
+
+     The object comes here if it is dying due to an error, because its parent
+     cookie has been relinquished by the netfs or because the cache is being
+     withdrawn.
+
+     Any child objects waiting on this one are given CPU time so that they too
+     can destroy themselves.  This object waits for all its children to go away
+     before advancing to the next state.
+
+ (9) State FSCACHE_OBJECT_ABORT_INIT.
+
+     The object comes to this state if it was waiting on its parent in
+     FSCACHE_OBJECT_INIT, but its parent died.  The object will destroy itself
+     so that the parent may proceed from the FSCACHE_OBJECT_DYING state.
+
+(10) State FSCACHE_OBJECT_RELEASING.
+(11) State FSCACHE_OBJECT_RECYCLING.
+
+     The object comes to one of these two states when dying once it is rid of
+     all its children, if it is dying because the netfs relinquished its
+     cookie.  In the first state, the cached data is expected to persist, and
+     in the second it will be deleted.
+
+(12) State FSCACHE_OBJECT_WITHDRAWING.
+
+     The object transits to this state if the cache decides it wants to
+     withdraw the object from service, perhaps to make space, but also due to
+     error or just because the whole cache is being withdrawn.
+
+(13) State FSCACHE_OBJECT_DEAD.
+
+     The object transits to this state when the in-memory object record is
+     ready to be deleted.  The object processor shouldn't ever see an object in
+     this state.
+
+
+THE SET OF EVENTS
+-----------------
+
+There are a number of events that can be raised to an object state machine:
+
+ (*) FSCACHE_OBJECT_EV_UPDATE
+
+     The netfs requested that an object be updated.  The state machine will ask
+     the cache backend to update the object, and the cache backend will ask the
+     netfs for details of the change through its cookie definition ops.
+
+ (*) FSCACHE_OBJECT_EV_CLEARED
+
+     This is signalled in two circumstances:
+
+     (a) when an object's last child object is dropped and
+
+     (b) when the last operation outstanding on an object is completed.
+
+     This is used to proceed from the dying state.
+
+ (*) FSCACHE_OBJECT_EV_ERROR
+
+     This is signalled when an I/O error occurs during the processing of some
+     object.
+
+ (*) FSCACHE_OBJECT_EV_RELEASE
+ (*) FSCACHE_OBJECT_EV_RETIRE
+
+     These are signalled when the netfs relinquishes a cookie it was using.
+     The event selected depends on whether the netfs asks for the backing
+     object to be retired (deleted) or retained.
+
+ (*) FSCACHE_OBJECT_EV_WITHDRAW
+
+     This is signalled when the cache backend wants to withdraw an object.
+     This means that the object will have to be detached from the netfs's
+     cookie.
+
+Because the withdrawing releasing/retiring events are all handled by the object
+state machine, it doesn't matter if there's a collision with both ends trying
+to sever the connection at the same time.  The state machine can just pick
+which one it wants to honour, and that effects the other.
diff --git a/Documentation/filesystems/caching/operations.txt b/Documentation/filesystems/caching/operations.txt
new file mode 100644
index 00000000000..b6b070c57cb
--- /dev/null
+++ b/Documentation/filesystems/caching/operations.txt
@@ -0,0 +1,213 @@
+		       ================================
+		       ASYNCHRONOUS OPERATIONS HANDLING
+		       ================================
+
+By: David Howells <dhowells@redhat.com>
+
+Contents:
+
+ (*) Overview.
+
+ (*) Operation record initialisation.
+
+ (*) Parameters.
+
+ (*) Procedure.
+
+ (*) Asynchronous callback.
+
+
+========
+OVERVIEW
+========
+
+FS-Cache has an asynchronous operations handling facility that it uses for its
+data storage and retrieval routines.  Its operations are represented by
+fscache_operation structs, though these are usually embedded into some other
+structure.
+
+This facility is available to and expected to be be used by the cache backends,
+and FS-Cache will create operations and pass them off to the appropriate cache
+backend for completion.
+
+To make use of this facility, <linux/fscache-cache.h> should be #included.
+
+
+===============================
+OPERATION RECORD INITIALISATION
+===============================
+
+An operation is recorded in an fscache_operation struct:
+
+	struct fscache_operation {
+		union {
+			struct work_struct fast_work;
+			struct slow_work slow_work;
+		};
+		unsigned long		flags;
+		fscache_operation_processor_t processor;
+		...
+	};
+
+Someone wanting to issue an operation should allocate something with this
+struct embedded in it.  They should initialise it by calling:
+
+	void fscache_operation_init(struct fscache_operation *op,
+				    fscache_operation_release_t release);
+
+with the operation to be initialised and the release function to use.
+
+The op->flags parameter should be set to indicate the CPU time provision and
+the exclusivity (see the Parameters section).
+
+The op->fast_work, op->slow_work and op->processor flags should be set as
+appropriate for the CPU time provision (see the Parameters section).
+
+FSCACHE_OP_WAITING may be set in op->flags prior to each submission of the
+operation and waited for afterwards.
+
+
+==========
+PARAMETERS
+==========
+
+There are a number of parameters that can be set in the operation record's flag
+parameter.  There are three options for the provision of CPU time in these
+operations:
+
+ (1) The operation may be done synchronously (FSCACHE_OP_MYTHREAD).  A thread
+     may decide it wants to handle an operation itself without deferring it to
+     another thread.
+
+     This is, for example, used in read operations for calling readpages() on
+     the backing filesystem in CacheFiles.  Although readpages() does an
+     asynchronous data fetch, the determination of whether pages exist is done
+     synchronously - and the netfs does not proceed until this has been
+     determined.
+
+     If this option is to be used, FSCACHE_OP_WAITING must be set in op->flags
+     before submitting the operation, and the operating thread must wait for it
+     to be cleared before proceeding:
+
+		wait_on_bit(&op->flags, FSCACHE_OP_WAITING,
+			    fscache_wait_bit, TASK_UNINTERRUPTIBLE);
+
+
+ (2) The operation may be fast asynchronous (FSCACHE_OP_FAST), in which case it
+     will be given to keventd to process.  Such an operation is not permitted
+     to sleep on I/O.
+
+     This is, for example, used by CacheFiles to copy data from a backing fs
+     page to a netfs page after the backing fs has read the page in.
+
+     If this option is used, op->fast_work and op->processor must be
+     initialised before submitting the operation:
+
+		INIT_WORK(&op->fast_work, do_some_work);
+
+
+ (3) The operation may be slow asynchronous (FSCACHE_OP_SLOW), in which case it
+     will be given to the slow work facility to process.  Such an operation is
+     permitted to sleep on I/O.
+
+     This is, for example, used by FS-Cache to handle background writes of
+     pages that have just been fetched from a remote server.
+
+     If this option is used, op->slow_work and op->processor must be
+     initialised before submitting the operation:
+
+		fscache_operation_init_slow(op, processor)
+
+
+Furthermore, operations may be one of two types:
+
+ (1) Exclusive (FSCACHE_OP_EXCLUSIVE).  Operations of this type may not run in
+     conjunction with any other operation on the object being operated upon.
+
+     An example of this is the attribute change operation, in which the file
+     being written to may need truncation.
+
+ (2) Shareable.  Operations of this type may be running simultaneously.  It's
+     up to the operation implementation to prevent interference between other
+     operations running at the same time.
+
+
+=========
+PROCEDURE
+=========
+
+Operations are used through the following procedure:
+
+ (1) The submitting thread must allocate the operation and initialise it
+     itself.  Normally this would be part of a more specific structure with the
+     generic op embedded within.
+
+ (2) The submitting thread must then submit the operation for processing using
+     one of the following two functions:
+
+	int fscache_submit_op(struct fscache_object *object,
+			      struct fscache_operation *op);
+
+	int fscache_submit_exclusive_op(struct fscache_object *object,
+					struct fscache_operation *op);
+
+     The first function should be used to submit non-exclusive ops and the
+     second to submit exclusive ones.  The caller must still set the
+     FSCACHE_OP_EXCLUSIVE flag.
+
+     If successful, both functions will assign the operation to the specified
+     object and return 0.  -ENOBUFS will be returned if the object specified is
+     permanently unavailable.
+
+     The operation manager will defer operations on an object that is still
+     undergoing lookup or creation.  The operation will also be deferred if an
+     operation of conflicting exclusivity is in progress on the object.
+
+     If the operation is asynchronous, the manager will retain a reference to
+     it, so the caller should put their reference to it by passing it to:
+
+	void fscache_put_operation(struct fscache_operation *op);
+
+ (3) If the submitting thread wants to do the work itself, and has marked the
+     operation with FSCACHE_OP_MYTHREAD, then it should monitor
+     FSCACHE_OP_WAITING as described above and check the state of the object if
+     necessary (the object might have died whilst the thread was waiting).
+
+     When it has finished doing its processing, it should call
+     fscache_put_operation() on it.
+
+ (4) The operation holds an effective lock upon the object, preventing other
+     exclusive ops conflicting until it is released.  The operation can be
+     enqueued for further immediate asynchronous processing by adjusting the
+     CPU time provisioning option if necessary, eg:
+
+	op->flags &= ~FSCACHE_OP_TYPE;
+	op->flags |= ~FSCACHE_OP_FAST;
+
+     and calling:
+
+	void fscache_enqueue_operation(struct fscache_operation *op)
+
+     This can be used to allow other things to have use of the worker thread
+     pools.
+
+
+=====================
+ASYNCHRONOUS CALLBACK
+=====================
+
+When used in asynchronous mode, the worker thread pool will invoke the
+processor method with a pointer to the operation.  This should then get at the
+container struct by using container_of():
+
+	static void fscache_write_op(struct fscache_operation *_op)
+	{
+		struct fscache_storage *op =
+			container_of(_op, struct fscache_storage, op);
+	...
+	}
+
+The caller holds a reference on the operation, and will invoke
+fscache_put_operation() when the processor function returns.  The processor
+function is at liberty to call fscache_enqueue_operation() or to take extra
+references.
diff --git a/Documentation/filesystems/exofs.txt b/Documentation/filesystems/exofs.txt
new file mode 100644
index 00000000000..0ced74c2f73
--- /dev/null
+++ b/Documentation/filesystems/exofs.txt
@@ -0,0 +1,176 @@
+===============================================================================
+WHAT IS EXOFS?
+===============================================================================
+
+exofs is a file system that uses an OSD and exports the API of a normal Linux
+file system. Users access exofs like any other local file system, and exofs
+will in turn issue commands to the local OSD initiator.
+
+OSD is a new T10 command set that views storage devices not as a large/flat
+array of sectors but as a container of objects, each having a length, quota,
+time attributes and more. Each object is addressed by a 64bit ID, and is
+contained in a 64bit ID partition. Each object has associated attributes
+attached to it, which are integral part of the object and provide metadata about
+the object. The standard defines some common obligatory attributes, but user
+attributes can be added as needed.
+
+===============================================================================
+ENVIRONMENT
+===============================================================================
+
+To use this file system, you need to have an object store to run it on.  You
+may download a target from:
+http://open-osd.org
+
+See Documentation/scsi/osd.txt for how to setup a working osd environment.
+
+===============================================================================
+USAGE
+===============================================================================
+
+1. Download and compile exofs and open-osd initiator:
+  You need an external Kernel source tree or kernel headers from your
+  distribution. (anything based on 2.6.26 or later).
+
+  a. download open-osd including exofs source using:
+     [parent-directory]$ git clone git://git.open-osd.org/open-osd.git
+
+  b. Build the library module like this:
+     [parent-directory]$ make -C KSRC=$(KER_DIR) open-osd
+
+     This will build both the open-osd initiator as well as the exofs kernel
+     module. Use whatever parameters you compiled your Kernel with and
+     $(KER_DIR) above pointing to the Kernel you compile against. See the file
+     open-osd/top-level-Makefile for an example.
+
+2. Get the OSD initiator and target set up properly, and login to the target.
+  See Documentation/scsi/osd.txt for farther instructions. Also see ./do-osd
+  for example script that does all these steps.
+
+3. Insmod the exofs.ko module:
+   [exofs]$ insmod exofs.ko
+
+4. Make sure the directory where you want to mount exists. If not, create it.
+   (For example, mkdir /mnt/exofs)
+
+5. At first run you will need to invoke the mkfs.exofs application
+
+   As an example, this will create the file system on:
+   /dev/osd0 partition ID 65536
+
+   mkfs.exofs --pid=65536 --format /dev/osd0
+
+   The --format is optional if not specified no OSD_FORMAT will be
+   preformed and a clean file system will be created in the specified pid,
+   in the available space of the target. (Use --format=size_in_meg to limit
+   the total LUN space available)
+
+   If pid already exist it will be deleted and a new one will be created in it's
+   place. Be careful.
+
+   An exofs lives inside a single OSD partition. You can create multiple exofs
+   filesystems on the same device using multiple pids.
+
+   (run mkfs.exofs without any parameters for usage help message)
+
+6. Mount the file system.
+
+   For example, to mount /dev/osd0, partition ID 0x10000 on /mnt/exofs:
+
+	mount -t exofs -o pid=65536 /dev/osd0 /mnt/exofs/
+
+7. For reference (See do-exofs example script):
+	do-exofs start - an example of how to perform the above steps.
+	do-exofs stop -  an example of how to unmount the file system.
+	do-exofs format - an example of how to format and mkfs a new exofs.
+
+8. Extra compilation flags (uncomment in fs/exofs/Kbuild):
+	CONFIG_EXOFS_DEBUG - for debug messages and extra checks.
+
+===============================================================================
+exofs mount options
+===============================================================================
+Similar to any mount command:
+	mount -t exofs -o exofs_options /dev/osdX mount_exofs_directory
+
+Where:
+    -t exofs: specifies the exofs file system
+
+    /dev/osdX: X is a decimal number. /dev/osdX was created after a successful
+               login into an OSD target.
+
+    mount_exofs_directory: The directory to mount the file system on
+
+    exofs specific options: Options are separated by commas (,)
+		pid=<integer> - The partition number to mount/create as
+                                container of the filesystem.
+                                This option is mandatory
+                to=<integer>  - Timeout in ticks for a single command
+                                default is (60 * HZ) [for debugging only]
+
+===============================================================================
+DESIGN
+===============================================================================
+
+* The file system control block (AKA on-disk superblock) resides in an object
+  with a special ID (defined in common.h).
+  Information included in the file system control block is used to fill the
+  in-memory superblock structure at mount time. This object is created before
+  the file system is used by mkexofs.c It contains information such as:
+	- The file system's magic number
+	- The next inode number to be allocated
+
+* Each file resides in its own object and contains the data (and it will be
+  possible to extend the file over multiple objects, though this has not been
+  implemented yet).
+
+* A directory is treated as a file, and essentially contains a list of <file
+  name, inode #> pairs for files that are found in that directory. The object
+  IDs correspond to the files' inode numbers and will be allocated according to
+  a bitmap (stored in a separate object). Now they are allocated using a
+  counter.
+
+* Each file's control block (AKA on-disk inode) is stored in its object's
+  attributes. This applies to both regular files and other types (directories,
+  device files, symlinks, etc.).
+
+* Credentials are generated per object (inode and superblock) when they is
+  created in memory (read off disk or created). The credential works for all
+  operations and is used as long as the object remains in memory.
+
+* Async OSD operations are used whenever possible, but the target may execute
+  them out of order. The operations that concern us are create, delete,
+  readpage, writepage, update_inode, and truncate. The following pairs of
+  operations should execute in the order written, and we need to prevent them
+  from executing in reverse order:
+	- The following are handled with the OBJ_CREATED and OBJ_2BCREATED
+	  flags. OBJ_CREATED is set when we know the object exists on the OSD -
+	  in create's callback function, and when we successfully do a read_inode.
+	  OBJ_2BCREATED is set in the beginning of the create function, so we
+	  know that we should wait.
+		- create/delete: delete should wait until the object is created
+		  on the OSD.
+		- create/readpage: readpage should be able to return a page
+		  full of zeroes in this case. If there was a write already
+		  en-route (i.e. create, writepage, readpage) then the page
+		  would be locked, and so it would really be the same as
+		  create/writepage.
+		- create/writepage: if writepage is called for a sync write, it
+		  should wait until the object is created on the OSD.
+		  Otherwise, it should just return.
+		- create/truncate: truncate should wait until the object is
+		  created on the OSD.
+		- create/update_inode: update_inode should wait until the
+		  object is created on the OSD.
+	- Handled by VFS locks:
+		- readpage/delete: shouldn't happen because of page lock.
+		- writepage/delete: shouldn't happen because of page lock.
+		- readpage/writepage: shouldn't happen because of page lock.
+
+===============================================================================
+LICENSE/COPYRIGHT
+===============================================================================
+The exofs file system is based on ext2 v0.5b (distributed with the Linux kernel
+version 2.6.10).  All files include the original copyrights, and the license
+is GPL version 2 (only version 2, as is true for the Linux kernel).  The
+Linux kernel can be downloaded from www.kernel.org.
diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt
index 4333e836c49..e055acb6b2d 100644
--- a/Documentation/filesystems/ext2.txt
+++ b/Documentation/filesystems/ext2.txt
@@ -373,10 +373,11 @@ Filesystem Resizing	http://ext2resize.sourceforge.net/
 Compression (*)		http://e2compr.sourceforge.net/
 
 Implementations for:
-Windows 95/98/NT/2000	http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm
-Windows 95 (*)		http://www.yipton.demon.co.uk/content.html#FSDEXT2
+Windows 95/98/NT/2000	http://www.chrysocome.net/explore2fs
+Windows 95 (*)		http://www.yipton.net/content.html#FSDEXT2
 DOS client (*)		ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
-OS/2			http://perso.wanadoo.fr/matthieu.willm/ext2-os2/
-RISC OS client		ftp://ftp.barnet.ac.uk/pub/acorn/armlinux/iscafs/
+OS/2 (+)		ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
+RISC OS client		http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/
 
 (*) no longer actively developed/supported (as of Apr 2001)
+(+) no longer actively developed/supported (as of Mar 2009)
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
index 9dd2a3bb2ac..570f9bd9be2 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@@ -14,6 +14,11 @@ Options
 When mounting an ext3 filesystem, the following option are accepted:
 (*) == default
 
+ro			Mount filesystem read only. Note that ext3 will replay
+			the journal (and thus write to the partition) even when
+			mounted "read only". Mount options "ro,noload" can be
+			used to prevent writes to the filesystem.
+
 journal=update		Update the ext3 file system's journal to the current
 			format.
 
@@ -27,7 +32,9 @@ journal_dev=devnum	When the external journal device's major/minor numbers
 			identified through its new major/minor numbers encoded
 			in devnum.
 
-noload			Don't load the journal on mounting.
+noload			Don't load the journal on mounting. Note that this forces
+			mount of inconsistent filesystem, which can lead to
+			various problems.
 
 data=journal		All data are committed into the journal prior to being
 			written into the main file system.
@@ -92,9 +99,12 @@ nocheck
 
 debug			Extra debugging information is sent to syslog.
 
-errors=remount-ro(*)	Remount the filesystem read-only on an error.
+errors=remount-ro	Remount the filesystem read-only on an error.
 errors=continue		Keep going on a filesystem error.
 errors=panic		Panic and halt the machine if an error occurs.
+			(These mount options override the errors behavior
+			specified in the superblock, which can be
+			configured using tune2fs.)
 
 data_err=ignore(*)	Just print an error message if an error occurs
 			in a file data buffer in ordered mode.
@@ -198,5 +208,5 @@ kernel source:	<file:fs/ext3/>
 programs: 	http://e2fsprogs.sourceforge.net/
 		http://ext2resize.sourceforge.net
 
-useful links:	http://www-106.ibm.com/developerworks/linux/library/l-fs7/
-		http://www-106.ibm.com/developerworks/linux/library/l-fs8/
+useful links:	http://www.ibm.com/developerworks/library/l-fs7.html
+		http://www.ibm.com/developerworks/library/l-fs8.html
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index cec829bc729..97882df0486 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -85,7 +85,7 @@ Note: More extensive information for getting started with ext4 can be
 * extent format more robust in face of on-disk corruption due to magics,
 * internal redundancy in tree
 * improved file allocation (multi-block alloc)
-* fix 32000 subdirectory limit
+* lift 32000 subdirectory limit imposed by i_links_count[1]
 * nsec timestamps for mtime, atime, ctime, create time
 * inode version field on disk (NFSv4, Lustre)
 * reduced e2fsck time via uninit_bg feature
@@ -100,6 +100,9 @@ Note: More extensive information for getting started with ext4 can be
 * efficent new ordered mode in JBD2 and ext4(avoid using buffer head to force
   the ordering)
 
+[1] Filesystems with a block size of 1k may see a limit imposed by the
+directory hash tree having a maximum depth of two.
+
 2.2 Candidate features for future inclusion
 
 * Online defrag (patches available but not well tested)
@@ -180,8 +183,8 @@ commit=nrsec	(*)	Ext4 can be told to sync all its data and metadata
 			performance.
 
 barrier=<0|1(*)>	This enables/disables the use of write barriers in
-			the jbd code.  barrier=0 disables, barrier=1 enables.
-			This also requires an IO stack which can support
+barrier(*)		the jbd code.  barrier=0 disables, barrier=1 enables.
+nobarrier		This also requires an IO stack which can support
 			barriers, and if jbd gets an error on a barrier
 			write, it will disable again with a warning.
 			Write barriers enforce proper on-disk ordering
@@ -189,6 +192,9 @@ barrier=<0|1(*)>	This enables/disables the use of write barriers in
 			safe to use, at some performance penalty.  If
 			your disks are battery-backed in one way or another,
 			disabling barriers may safely improve performance.
+			The mount options "barrier" and "nobarrier" can
+			also be used to enable or disable barriers, for
+			consistency with other ext4 mount options.
 
 inode_readahead=n	This tuning parameter controls the maximum
 			number of inode table blocks that ext4's inode
@@ -310,6 +316,24 @@ journal_ioprio=prio	The I/O priority (from 0 to 7, where 0 is the
 			a slightly higher priority than the default I/O
 			priority.
 
+auto_da_alloc(*)	Many broken applications don't use fsync() when 
+noauto_da_alloc		replacing existing files via patterns such as
+			fd = open("foo.new")/write(fd,..)/close(fd)/
+			rename("foo.new", "foo"), or worse yet,
+			fd = open("foo", O_TRUNC)/write(fd,..)/close(fd).
+			If auto_da_alloc is enabled, ext4 will detect
+			the replace-via-rename and replace-via-truncate
+			patterns and force that any delayed allocation
+			blocks are allocated such that at the next
+			journal commit, in the default data=ordered
+			mode, the data blocks of the new file are forced
+			to disk before the rename() operation is
+			commited.  This provides roughly the same level
+			of guarantees as ext3, and avoids the
+			"zero-length" problem that can happen when a
+			system crashes before the delayed allocation
+			blocks are forced to disk.
+
 Data Mode
 =========
 There are 3 different data modes:
diff --git a/Documentation/filesystems/knfsd-stats.txt b/Documentation/filesystems/knfsd-stats.txt
new file mode 100644
index 00000000000..64ced5149d3
--- /dev/null
+++ b/Documentation/filesystems/knfsd-stats.txt
@@ -0,0 +1,159 @@
+
+Kernel NFS Server Statistics
+============================
+
+This document describes the format and semantics of the statistics
+which the kernel NFS server makes available to userspace.  These
+statistics are available in several text form pseudo files, each of
+which is described separately below.
+
+In most cases you don't need to know these formats, as the nfsstat(8)
+program from the nfs-utils distribution provides a helpful command-line
+interface for extracting and printing them.
+
+All the files described here are formatted as a sequence of text lines,
+separated by newline '\n' characters.  Lines beginning with a hash
+'#' character are comments intended for humans and should be ignored
+by parsing routines.  All other lines contain a sequence of fields
+separated by whitespace.
+
+/proc/fs/nfsd/pool_stats
+------------------------
+
+This file is available in kernels from 2.6.30 onwards, if the
+/proc/fs/nfsd filesystem is mounted (it almost always should be).
+
+The first line is a comment which describes the fields present in
+all the other lines.  The other lines present the following data as
+a sequence of unsigned decimal numeric fields.  One line is shown
+for each NFS thread pool.
+
+All counters are 64 bits wide and wrap naturally.  There is no way
+to zero these counters, instead applications should do their own
+rate conversion.
+
+pool
+	The id number of the NFS thread pool to which this line applies.
+	This number does not change.
+
+	Thread pool ids are a contiguous set of small integers starting
+	at zero.  The maximum value depends on the thread pool mode, but
+	currently cannot be larger than the number of CPUs in the system.
+	Note that in the default case there will be a single thread pool
+	which contains all the nfsd threads and all the CPUs in the system,
+	and thus this file will have a single line with a pool id of "0".
+
+packets-arrived
+	Counts how many NFS packets have arrived.  More precisely, this
+	is the number of times that the network stack has notified the
+	sunrpc server layer that new data may be available on a transport
+	(e.g. an NFS or UDP socket or an NFS/RDMA endpoint).
+
+	Depending on the NFS workload patterns and various network stack
+	effects (such as Large Receive Offload) which can combine packets
+	on the wire, this may be either more or less than the number
+	of NFS calls received (which statistic is available elsewhere).
+	However this is a more accurate and less workload-dependent measure
+	of how much CPU load is being placed on the sunrpc server layer
+	due to NFS network traffic.
+
+sockets-enqueued
+	Counts how many times an NFS transport is enqueued to wait for
+	an nfsd thread to service it, i.e. no nfsd thread was considered
+	available.
+
+	The circumstance this statistic tracks indicates that there was NFS
+	network-facing work to be done but it couldn't be done immediately,
+	thus introducing a small delay in servicing NFS calls.  The ideal
+	rate of change for this counter is zero; significantly non-zero
+	values may indicate a performance limitation.
+
+	This can happen either because there are too few nfsd threads in the
+	thread pool for the NFS workload (the workload is thread-limited),
+	or because the NFS workload needs more CPU time than is available in
+	the thread pool (the workload is CPU-limited).  In the former case,
+	configuring more nfsd threads will probably improve the performance
+	of the NFS workload.  In the latter case, the sunrpc server layer is
+	already choosing not to wake idle nfsd threads because there are too
+	many nfsd threads which want to run but cannot, so configuring more
+	nfsd threads will make no difference whatsoever.  The overloads-avoided
+	statistic (see below) can be used to distinguish these cases.
+
+threads-woken
+	Counts how many times an idle nfsd thread is woken to try to
+	receive some data from an NFS transport.
+
+	This statistic tracks the circumstance where incoming
+	network-facing NFS work is being handled quickly, which is a good
+	thing.  The ideal rate of change for this counter will be close
+	to but less than the rate of change of the packets-arrived counter.
+
+overloads-avoided
+	Counts how many times the sunrpc server layer chose not to wake an
+	nfsd thread, despite the presence of idle nfsd threads, because
+	too many nfsd threads had been recently woken but could not get
+	enough CPU time to actually run.
+
+	This statistic counts a circumstance where the sunrpc layer
+	heuristically avoids overloading the CPU scheduler with too many
+	runnable nfsd threads.  The ideal rate of change for this counter
+	is zero.  Significant non-zero values indicate that the workload
+	is CPU limited.  Usually this is associated with heavy CPU usage
+	on all the CPUs in the nfsd thread pool.
+
+	If a sustained large overloads-avoided rate is detected on a pool,
+	the top(1) utility should be used to check for the following
+	pattern of CPU usage on all the CPUs associated with the given
+	nfsd thread pool.
+
+	 - %us ~= 0 (as you're *NOT* running applications on your NFS server)
+
+	 - %wa ~= 0
+
+	 - %id ~= 0
+
+	 - %sy + %hi + %si ~= 100
+
+	If this pattern is seen, configuring more nfsd threads will *not*
+	improve the performance of the workload.  If this patten is not
+	seen, then something more subtle is wrong.
+
+threads-timedout
+	Counts how many times an nfsd thread triggered an idle timeout,
+	i.e. was not woken to handle any incoming network packets for
+	some time.
+
+	This statistic counts a circumstance where there are more nfsd
+	threads configured than can be used by the NFS workload.  This is
+	a clue that the number of nfsd threads can be reduced without
+	affecting performance.  Unfortunately, it's only a clue and not
+	a strong indication, for a couple of reasons:
+
+	 - Currently the rate at which the counter is incremented is quite
+	   slow; the idle timeout is 60 minutes.  Unless the NFS workload
+	   remains constant for hours at a time, this counter is unlikely
+	   to be providing information that is still useful.
+
+	 - It is usually a wise policy to provide some slack,
+	   i.e. configure a few more nfsds than are currently needed,
+	   to allow for future spikes in load.
+
+
+Note that incoming packets on NFS transports will be dealt with in
+one of three ways.  An nfsd thread can be woken (threads-woken counts
+this case), or the transport can be enqueued for later attention
+(sockets-enqueued counts this case), or the packet can be temporarily
+deferred because the transport is currently being used by an nfsd
+thread.  This last case is not very interesting and is not explicitly
+counted, but can be inferred from the other counters thus:
+
+packets-deferred = packets-arrived - ( sockets-enqueued + threads-woken )
+
+
+More
+----
+Descriptions of the other statistics file should go here.
+
+
+Greg Banks <gnb@sgi.com>
+26 Mar 2009
diff --git a/Documentation/filesystems/nfs41-server.txt b/Documentation/filesystems/nfs41-server.txt
new file mode 100644
index 00000000000..05d81cbcb2e
--- /dev/null
+++ b/Documentation/filesystems/nfs41-server.txt
@@ -0,0 +1,161 @@
+NFSv4.1 Server Implementation
+
+Server support for minorversion 1 can be controlled using the
+/proc/fs/nfsd/versions control file.  The string output returned
+by reading this file will contain either "+4.1" or "-4.1"
+correspondingly.
+
+Currently, server support for minorversion 1 is disabled by default.
+It can be enabled at run time by writing the string "+4.1" to
+the /proc/fs/nfsd/versions control file.  Note that to write this
+control file, the nfsd service must be taken down.  Use your user-mode
+nfs-utils to set this up; see rpc.nfsd(8)
+
+The NFSv4 minorversion 1 (NFSv4.1) implementation in nfsd is based
+on the latest NFSv4.1 Internet Draft:
+http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-29
+
+From the many new features in NFSv4.1 the current implementation
+focuses on the mandatory-to-implement NFSv4.1 Sessions, providing
+"exactly once" semantics and better control and throttling of the
+resources allocated for each client.
+
+Other NFSv4.1 features, Parallel NFS operations in particular,
+are still under development out of tree.
+See http://wiki.linux-nfs.org/wiki/index.php/PNFS_prototype_design
+for more information.
+
+The table below, taken from the NFSv4.1 document, lists
+the operations that are mandatory to implement (REQ), optional
+(OPT), and NFSv4.0 operations that are required not to implement (MNI)
+in minor version 1.  The first column indicates the operations that
+are not supported yet by the linux server implementation.
+
+The OPTIONAL features identified and their abbreviations are as follows:
+	pNFS	Parallel NFS
+	FDELG	File Delegations
+	DDELG	Directory Delegations
+
+The following abbreviations indicate the linux server implementation status.
+	I	Implemented NFSv4.1 operations.
+	NS	Not Supported.
+	NS*	unimplemented optional feature.
+	P	pNFS features implemented out of tree.
+	PNS	pNFS features that are not supported yet (out of tree).
+
+Operations
+
+   +----------------------+------------+--------------+----------------+
+   | Operation            | REQ, REC,  | Feature      | Definition     |
+   |                      | OPT, or    | (REQ, REC,   |                |
+   |                      | MNI        | or OPT)      |                |
+   +----------------------+------------+--------------+----------------+
+   | ACCESS               | REQ        |              | Section 18.1   |
+NS | BACKCHANNEL_CTL      | REQ        |              | Section 18.33  |
+NS | BIND_CONN_TO_SESSION | REQ        |              | Section 18.34  |
+   | CLOSE                | REQ        |              | Section 18.2   |
+   | COMMIT               | REQ        |              | Section 18.3   |
+   | CREATE               | REQ        |              | Section 18.4   |
+I  | CREATE_SESSION       | REQ        |              | Section 18.36  |
+NS*| DELEGPURGE           | OPT        | FDELG (REQ)  | Section 18.5   |
+   | DELEGRETURN          | OPT        | FDELG,       | Section 18.6   |
+   |                      |            | DDELG, pNFS  |                |
+   |                      |            | (REQ)        |                |
+NS | DESTROY_CLIENTID     | REQ        |              | Section 18.50  |
+I  | DESTROY_SESSION      | REQ        |              | Section 18.37  |
+I  | EXCHANGE_ID          | REQ        |              | Section 18.35  |
+NS | FREE_STATEID         | REQ        |              | Section 18.38  |
+   | GETATTR              | REQ        |              | Section 18.7   |
+P  | GETDEVICEINFO        | OPT        | pNFS (REQ)   | Section 18.40  |
+P  | GETDEVICELIST        | OPT        | pNFS (OPT)   | Section 18.41  |
+   | GETFH                | REQ        |              | Section 18.8   |
+NS*| GET_DIR_DELEGATION   | OPT        | DDELG (REQ)  | Section 18.39  |
+P  | LAYOUTCOMMIT         | OPT        | pNFS (REQ)   | Section 18.42  |
+P  | LAYOUTGET            | OPT        | pNFS (REQ)   | Section 18.43  |
+P  | LAYOUTRETURN         | OPT        | pNFS (REQ)   | Section 18.44  |
+   | LINK                 | OPT        |              | Section 18.9   |
+   | LOCK                 | REQ        |              | Section 18.10  |
+   | LOCKT                | REQ        |              | Section 18.11  |
+   | LOCKU                | REQ        |              | Section 18.12  |
+   | LOOKUP               | REQ        |              | Section 18.13  |
+   | LOOKUPP              | REQ        |              | Section 18.14  |
+   | NVERIFY              | REQ        |              | Section 18.15  |
+   | OPEN                 | REQ        |              | Section 18.16  |
+NS*| OPENATTR             | OPT        |              | Section 18.17  |
+   | OPEN_CONFIRM         | MNI        |              | N/A            |
+   | OPEN_DOWNGRADE       | REQ        |              | Section 18.18  |
+   | PUTFH                | REQ        |              | Section 18.19  |
+   | PUTPUBFH             | REQ        |              | Section 18.20  |
+   | PUTROOTFH            | REQ        |              | Section 18.21  |
+   | READ                 | REQ        |              | Section 18.22  |
+   | READDIR              | REQ        |              | Section 18.23  |
+   | READLINK             | OPT        |              | Section 18.24  |
+NS | RECLAIM_COMPLETE     | REQ        |              | Section 18.51  |
+   | RELEASE_LOCKOWNER    | MNI        |              | N/A            |
+   | REMOVE               | REQ        |              | Section 18.25  |
+   | RENAME               | REQ        |              | Section 18.26  |
+   | RENEW                | MNI        |              | N/A            |
+   | RESTOREFH            | REQ        |              | Section 18.27  |
+   | SAVEFH               | REQ        |              | Section 18.28  |
+   | SECINFO              | REQ        |              | Section 18.29  |
+NS | SECINFO_NO_NAME      | REC        | pNFS files   | Section 18.45, |
+   |                      |            | layout (REQ) | Section 13.12  |
+I  | SEQUENCE             | REQ        |              | Section 18.46  |
+   | SETATTR              | REQ        |              | Section 18.30  |
+   | SETCLIENTID          | MNI        |              | N/A            |
+   | SETCLIENTID_CONFIRM  | MNI        |              | N/A            |
+NS | SET_SSV              | REQ        |              | Section 18.47  |
+NS | TEST_STATEID         | REQ        |              | Section 18.48  |
+   | VERIFY               | REQ        |              | Section 18.31  |
+NS*| WANT_DELEGATION      | OPT        | FDELG (OPT)  | Section 18.49  |
+   | WRITE                | REQ        |              | Section 18.32  |
+
+Callback Operations
+
+   +-------------------------+-----------+-------------+---------------+
+   | Operation               | REQ, REC, | Feature     | Definition    |
+   |                         | OPT, or   | (REQ, REC,  |               |
+   |                         | MNI       | or OPT)     |               |
+   +-------------------------+-----------+-------------+---------------+
+   | CB_GETATTR              | OPT       | FDELG (REQ) | Section 20.1  |
+P  | CB_LAYOUTRECALL         | OPT       | pNFS (REQ)  | Section 20.3  |
+NS*| CB_NOTIFY               | OPT       | DDELG (REQ) | Section 20.4  |
+P  | CB_NOTIFY_DEVICEID      | OPT       | pNFS (OPT)  | Section 20.12 |
+NS*| CB_NOTIFY_LOCK          | OPT       |             | Section 20.11 |
+NS*| CB_PUSH_DELEG           | OPT       | FDELG (OPT) | Section 20.5  |
+   | CB_RECALL               | OPT       | FDELG,      | Section 20.2  |
+   |                         |           | DDELG, pNFS |               |
+   |                         |           | (REQ)       |               |
+NS*| CB_RECALL_ANY           | OPT       | FDELG,      | Section 20.6  |
+   |                         |           | DDELG, pNFS |               |
+   |                         |           | (REQ)       |               |
+NS | CB_RECALL_SLOT          | REQ       |             | Section 20.8  |
+NS*| CB_RECALLABLE_OBJ_AVAIL | OPT       | DDELG, pNFS | Section 20.7  |
+   |                         |           | (REQ)       |               |
+I  | CB_SEQUENCE             | OPT       | FDELG,      | Section 20.9  |
+   |                         |           | DDELG, pNFS |               |
+   |                         |           | (REQ)       |               |
+NS*| CB_WANTS_CANCELLED      | OPT       | FDELG,      | Section 20.10 |
+   |                         |           | DDELG, pNFS |               |
+   |                         |           | (REQ)       |               |
+   +-------------------------+-----------+-------------+---------------+
+
+Implementation notes:
+
+EXCHANGE_ID:
+* only SP4_NONE state protection supported
+* implementation ids are ignored
+
+CREATE_SESSION:
+* backchannel attributes are ignored
+* backchannel security parameters are ignored
+
+SEQUENCE:
+* no support for dynamic slot table renegotiation (optional)
+
+nfsv4.1 COMPOUND rules:
+The following cases aren't supported yet:
+* Enforcing of NFS4ERR_NOT_ONLY_OP for: BIND_CONN_TO_SESSION, CREATE_SESSION,
+  DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID.
+* DESTROY_SESSION MUST be the final operation in the COMPOUND request.
+
diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt
new file mode 100644
index 00000000000..55c4300abfc
--- /dev/null
+++ b/Documentation/filesystems/nilfs2.txt
@@ -0,0 +1,200 @@
+NILFS2
+------
+
+NILFS2 is a log-structured file system (LFS) supporting continuous
+snapshotting.  In addition to versioning capability of the entire file
+system, users can even restore files mistakenly overwritten or
+destroyed just a few seconds ago.  Since NILFS2 can keep consistency
+like conventional LFS, it achieves quick recovery after system
+crashes.
+
+NILFS2 creates a number of checkpoints every few seconds or per
+synchronous write basis (unless there is no change).  Users can select
+significant versions among continuously created checkpoints, and can
+change them into snapshots which will be preserved until they are
+changed back to checkpoints.
+
+There is no limit on the number of snapshots until the volume gets
+full.  Each snapshot is mountable as a read-only file system
+concurrently with its writable mount, and this feature is convenient
+for online backup.
+
+The userland tools are included in nilfs-utils package, which is
+available from the following download page.  At least "mkfs.nilfs2",
+"mount.nilfs2", "umount.nilfs2", and "nilfs_cleanerd" (so called
+cleaner or garbage collector) are required.  Details on the tools are
+described in the man pages included in the package.
+
+Project web page:    http://www.nilfs.org/en/
+Download page:       http://www.nilfs.org/en/download.html
+Git tree web page:   http://www.nilfs.org/git/
+NILFS mailing lists: http://www.nilfs.org/mailman/listinfo/users
+
+Caveats
+=======
+
+Features which NILFS2 does not support yet:
+
+	- atime
+	- extended attributes
+	- POSIX ACLs
+	- quotas
+	- writable snapshots
+	- remote backup (CDP)
+	- data integrity
+	- defragmentation
+
+Mount options
+=============
+
+NILFS2 supports the following mount options:
+(*) == default
+
+barrier=on(*)		This enables/disables barriers. barrier=off disables
+			it, barrier=on enables it.
+errors=continue(*)	Keep going on a filesystem error.
+errors=remount-ro	Remount the filesystem read-only on an error.
+errors=panic		Panic and halt the machine if an error occurs.
+cp=n			Specify the checkpoint-number of the snapshot to be
+			mounted.  Checkpoints and snapshots are listed by lscp
+			user command.  Only the checkpoints marked as snapshot
+			are mountable with this option.  Snapshot is read-only,
+			so a read-only mount option must be specified together.
+order=relaxed(*)	Apply relaxed order semantics that allows modified data
+			blocks to be written to disk without making a
+			checkpoint if no metadata update is going.  This mode
+			is equivalent to the ordered data mode of the ext3
+			filesystem except for the updates on data blocks still
+			conserve atomicity.  This will improve synchronous
+			write performance for overwriting.
+order=strict		Apply strict in-order semantics that preserves sequence
+			of all file operations including overwriting of data
+			blocks.  That means, it is guaranteed that no
+			overtaking of events occurs in the recovered file
+			system after a crash.
+
+NILFS2 usage
+============
+
+To use nilfs2 as a local file system, simply:
+
+ # mkfs -t nilfs2 /dev/block_device
+ # mount -t nilfs2 /dev/block_device /dir
+
+This will also invoke the cleaner through the mount helper program
+(mount.nilfs2).
+
+Checkpoints and snapshots are managed by the following commands.
+Their manpages are included in the nilfs-utils package above.
+
+  lscp     list checkpoints or snapshots.
+  mkcp     make a checkpoint or a snapshot.
+  chcp     change an existing checkpoint to a snapshot or vice versa.
+  rmcp     invalidate specified checkpoint(s).
+
+To mount a snapshot,
+
+ # mount -t nilfs2 -r -o cp=<cno> /dev/block_device /snap_dir
+
+where <cno> is the checkpoint number of the snapshot.
+
+To unmount the NILFS2 mount point or snapshot, simply:
+
+ # umount /dir
+
+Then, the cleaner daemon is automatically shut down by the umount
+helper program (umount.nilfs2).
+
+Disk format
+===========
+
+A nilfs2 volume is equally divided into a number of segments except
+for the super block (SB) and segment #0.  A segment is the container
+of logs.  Each log is composed of summary information blocks, payload
+blocks, and an optional super root block (SR):
+
+   ______________________________________________________
+  | |SB| | Segment | Segment | Segment | ... | Segment | |
+  |_|__|_|____0____|____1____|____2____|_____|____N____|_|
+  0 +1K +4K       +8M       +16M      +24M  +(8MB x N)
+       .             .            (Typical offsets for 4KB-block)
+    .                  .
+  .______________________.
+  | log | log |... | log |
+  |__1__|__2__|____|__m__|
+        .       .
+      .               .
+    .                       .
+  .______________________________.
+  | Summary | Payload blocks  |SR|
+  |_blocks__|_________________|__|
+
+The payload blocks are organized per file, and each file consists of
+data blocks and B-tree node blocks:
+
+    |<---       File-A        --->|<---       File-B        --->|
+   _______________________________________________________________
+    | Data blocks | B-tree blocks | Data blocks | B-tree blocks | ...
+   _|_____________|_______________|_____________|_______________|_
+
+
+Since only the modified blocks are written in the log, it may have
+files without data blocks or B-tree node blocks.
+
+The organization of the blocks is recorded in the summary information
+blocks, which contains a header structure (nilfs_segment_summary), per
+file structures (nilfs_finfo), and per block structures (nilfs_binfo):
+
+  _________________________________________________________________________
+ | Summary | finfo | binfo | ... | binfo | finfo | binfo | ... | binfo |...
+ |_blocks__|___A___|_(A,1)_|_____|(A,Na)_|___B___|_(B,1)_|_____|(B,Nb)_|___
+
+
+The logs include regular files, directory files, symbolic link files
+and several meta data files.  The mata data files are the files used
+to maintain file system meta data.  The current version of NILFS2 uses
+the following meta data files:
+
+ 1) Inode file (ifile)             -- Stores on-disk inodes
+ 2) Checkpoint file (cpfile)       -- Stores checkpoints
+ 3) Segment usage file (sufile)    -- Stores allocation state of segments
+ 4) Data address translation file  -- Maps virtual block numbers to usual
+    (DAT)                             block numbers.  This file serves to
+                                      make on-disk blocks relocatable.
+
+The following figure shows a typical organization of the logs:
+
+  _________________________________________________________________________
+ | Summary | regular file | file  | ... | ifile | cpfile | sufile | DAT |SR|
+ |_blocks__|_or_directory_|_______|_____|_______|________|________|_____|__|
+
+
+To stride over segment boundaries, this sequence of files may be split
+into multiple logs.  The sequence of logs that should be treated as
+logically one log, is delimited with flags marked in the segment
+summary.  The recovery code of nilfs2 looks this boundary information
+to ensure atomicity of updates.
+
+The super root block is inserted for every checkpoints.  It includes
+three special inodes, inodes for the DAT, cpfile, and sufile.  Inodes
+of regular files, directories, symlinks and other special files, are
+included in the ifile.  The inode of ifile itself is included in the
+corresponding checkpoint entry in the cpfile.  Thus, the hierarchy
+among NILFS2 files can be depicted as follows:
+
+  Super block (SB)
+       |
+       v
+  Super root block (the latest cno=xx)
+       |-- DAT
+       |-- sufile
+       `-- cpfile
+              |-- ifile (cno=c1)
+              |-- ifile (cno=c2) ---- file (ino=i1)
+              :        :          |-- file (ino=i2)
+              `-- ifile (cno=xx)  |-- file (ino=i3)
+                                  :        :
+                                  `-- file (ino=yy)
+                                    ( regular file, directory, or symlink )
+
+For detail on the format of each file, please see include/linux/nilfs2_fs.h.
diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt
new file mode 100644
index 00000000000..6d6db60d567
--- /dev/null
+++ b/Documentation/filesystems/pohmelfs/design_notes.txt
@@ -0,0 +1,70 @@
+POHMELFS: Parallel Optimized Host Message Exchange Layered File System.
+
+		Evgeniy Polyakov <zbr@ioremap.net>
+
+Homepage: http://www.ioremap.net/projects/pohmelfs
+
+POHMELFS first began as a network filesystem with coherent local data and
+metadata caches but is now evolving into a parallel distributed filesystem.
+
+Main features of this FS include:
+ * Locally coherent cache for data and metadata with (potentially) byte-range locks.
+	Since all Linux filesystems lock the whole inode during writing, algorithm
+	is very simple and does not use byte-ranges, although they are sent in
+	locking messages.
+ * Completely async processing of all events except creation of hard and symbolic
+	links, and rename events.
+	Object creation and data reading and writing are processed asynchronously.
+ * Flexible object architecture optimized for network processing.
+	Ability to create long paths to objects and remove arbitrarily huge
+	directories with a single network command.
+	(like removing the whole kernel tree via a single network command).
+ * Very high performance.
+ * Fast and scalable multithreaded userspace server. Being in userspace it works
+	with any underlying filesystem and still is much faster than async in-kernel NFS one.
+ * Client is able to switch between different servers (if one goes down, client
+	automatically reconnects to second and so on).
+ * Transactions support. Full failover for all operations.
+	Resending transactions to different servers on timeout or error.
+ * Read request (data read, directory listing, lookup requests) balancing between multiple servers.
+ * Write requests are replicated to multiple servers and completed only when all of them are acked.
+ * Ability to add and/or remove servers from the working set at run-time.
+ * Strong authentification and possible data encryption in network channel.
+ * Extended attributes support.
+
+POHMELFS is based on transactions, which are potentially long-standing objects that live
+in the client's memory. Each transaction contains all the information needed to process a given
+command (or set of commands, which is frequently used during data writing: single transactions
+can contain creation and data writing commands). Transactions are committed by all the servers
+to which they are sent and, in case of failures, are eventually resent or dropped with an error.
+For example, reading will return an error if no servers are available.
+
+POHMELFS uses a asynchronous approach to data processing. Courtesy of transactions, it is
+possible to detach replies from requests and, if the command requires data to be received, the
+caller sleeps waiting for it. Thus, it is possible to issue multiple read commands to different
+servers and async threads will pick up replies in parallel, find appropriate transactions in the
+system and put the data where it belongs (like the page or inode cache).
+
+The main feature of POHMELFS is writeback data and the metadata cache.
+Only a few non-performance critical operations use the write-through cache and
+are synchronous: hard and symbolic link creation, and object rename. Creation,
+removal of objects and data writing are asynchronous and are sent to
+the server during system writeback. Only one writer at a time is allowed for any
+given inode, which is guarded by an appropriate locking protocol.
+Because of this feature, POHMELFS is extremely fast at metadata intensive
+workloads and can fully utilize the bandwidth to the servers when doing bulk
+data transfers.
+
+POHMELFS clients operate with a working set of servers and are capable of balancing read-only
+operations (like lookups or directory listings) between them.
+Administrators can add or remove servers from the set at run-time via special commands (described
+in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers.
+
+POHMELFS is capable of full data channel encryption and/or strong crypto hashing.
+One can select any kernel supported cipher, encryption mode, hash type and operation mode
+(hmac or digest). It is also possible to use both or neither (default). Crypto configuration
+is checked during mount time and, if the server does not support it, appropriate capabilities
+will be disabled or mount will fail (if 'crypto_fail_unsupported' mount option is specified).
+Crypto performance heavily depends on the number of crypto threads, which asynchronously perform
+crypto operations and send the resulting data to server or submit it up the stack. This number
+can be controlled via a mount option.
diff --git a/Documentation/filesystems/pohmelfs/info.txt b/Documentation/filesystems/pohmelfs/info.txt
new file mode 100644
index 00000000000..4e3d5015708
--- /dev/null
+++ b/Documentation/filesystems/pohmelfs/info.txt
@@ -0,0 +1,86 @@
+POHMELFS usage information.
+
+Mount options:
+idx=%u
+ Each mountpoint is associated with a special index via this option.
+ Administrator can add or remove servers from the given index, so all mounts,
+ which were attached to it, are updated.
+ Default it is 0.
+
+trans_scan_timeout=%u
+ This timeout, expressed in milliseconds, specifies time to scan transaction
+ trees looking for stale requests, which have to be resent, or if number of
+ retries exceed specified limit, dropped with error.
+ Default is 5 seconds.
+
+drop_scan_timeout=%u
+ Internal timeout, expressed in milliseconds, which specifies how frequently
+ inodes marked to be dropped are freed. It also specifies how frequently
+ the system checks that servers have to be added or removed from current working set.
+ Default is 1 second.
+
+wait_on_page_timeout=%u
+ Number of milliseconds to wait for reply from remote server for data reading command.
+ If this timeout is exceeded, reading returns an error.
+ Default is 5 seconds.
+
+trans_retries=%u
+ This is the number of times that a transaction will be resent to a server that did
+ not answer for the last @trans_scan_timeout milliseconds.
+ When the number of resends exceeds this limit, the transaction is completed with error.
+ Default is 5 resends.
+
+crypto_thread_num=%u
+ Number of crypto processing threads. Threads are used both for RX and TX traffic.
+ Default is 2, or no threads if crypto operations are not supported.
+
+trans_max_pages=%u
+ Maximum number of pages in a single transaction. This parameter also controls
+ the number of pages,  allocated for crypto processing (each crypto thread has
+ pool of pages, the number of which is equal to 'trans_max_pages'.
+ Default is 100 pages.
+
+crypto_fail_unsupported
+ If specified, mount will fail if the server does not support requested crypto operations.
+ By default mount will disable non-matching crypto operations.
+
+mcache_timeout=%u
+ Maximum number of milliseconds to wait for the mcache objects to be processed.
+ Mcache includes locks (given lock should be granted by server), attributes (they should be
+ fully received in the given timeframe).
+ Default is 5 seconds.
+
+Usage examples.
+
+Add (or remove if it already exists) server server1.net:1025 into the working set with index $idx
+with appropriate hash algorithm and key file and cipher algorithm, mode and key file:
+$cfg -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
+
+Mount filesystem with given index $idx to /mnt mountpoint.
+Client will connect to all servers specified in the working set via previous command:
+mount -t pohmel -o idx=$idx q /mnt
+
+One can add or remove servers from working set after mounting too.
+
+
+Server installation.
+
+Creating a server, which listens at port 1025 and 0.0.0.0 address.
+Working root directory (note, that server chroots there, so you have to have appropriate permissions)
+is set to /mnt, server will negotiate hash/cipher with client, in case client requested it, there
+are appropriate key files.
+Number of working threads is set to 10.
+
+# ./fserver -a 0.0.0.0 -p 1025 -r /mnt -w 10 -K hash_key -k cipher_key
+
+ -A 6			 - listen on ipv6 address. Default: Disabled.
+ -r root                 - path to root directory. Default: /tmp.
+ -a addr                 - listen address. Default: 0.0.0.0.
+ -p port                 - listen port. Default: 1025.
+ -w workers              - number of workers per connected client. Default: 1.
+ -K file		 - hash key size. Default: none.
+ -k file		 - cipher key size. Default: none.
+ -h                      - this help.
+
+Number of worker threads specifies how many workers will be created for each client.
+Bulk single-client transafers usually are better handled with smaller number (like 1-3).
diff --git a/Documentation/filesystems/pohmelfs/network_protocol.txt b/Documentation/filesystems/pohmelfs/network_protocol.txt
new file mode 100644
index 00000000000..40ea6c295af
--- /dev/null
+++ b/Documentation/filesystems/pohmelfs/network_protocol.txt
@@ -0,0 +1,227 @@
+POHMELFS network protocol.
+
+Basic structure used in network communication is following command:
+
+struct netfs_cmd
+{
+	__u16			cmd;	/* Command number */
+	__u16			csize;	/* Attached crypto information size */
+	__u16			cpad;	/* Attached padding size */
+	__u16			ext;	/* External flags */
+	__u32			size;	/* Size of the attached data */
+	__u32			trans;	/* Transaction id */
+	__u64			id;	/* Object ID to operate on. Used for feedback.*/
+	__u64			start;	/* Start of the object. */
+	__u64			iv;	/* IV sequence */
+	__u8			data[0];
+};
+
+Commands can be embedded into transaction command (which in turn has own command),
+so one can extend protocol as needed without breaking backward compatibility as long
+as old commands are supported. All string lengths include tail 0 byte.
+
+All commans are transfered over the network in big-endian. CPU endianess is used at the end peers.
+
+@cmd - command number, which specifies command to be processed. Following
+	commands are used currently:
+
+	NETFS_READDIR	= 1,	/* Read directory for given inode number */
+	NETFS_READ_PAGE,	/* Read data page from the server */
+	NETFS_WRITE_PAGE,	/* Write data page to the server */
+	NETFS_CREATE,		/* Create directory entry */
+	NETFS_REMOVE,		/* Remove directory entry */
+	NETFS_LOOKUP,		/* Lookup single object */
+	NETFS_LINK,		/* Create a link */
+	NETFS_TRANS,		/* Transaction */
+	NETFS_OPEN,		/* Open intent */
+	NETFS_INODE_INFO,	/* Metadata cache coherency synchronization message */
+	NETFS_PAGE_CACHE,	/* Page cache invalidation message */
+	NETFS_READ_PAGES,	/* Read multiple contiguous pages in one go */
+	NETFS_RENAME,		/* Rename object */
+	NETFS_CAPABILITIES,	/* Capabilities of the client, for example supported crypto */
+	NETFS_LOCK,		/* Distributed lock message */
+	NETFS_XATTR_SET,	/* Set extended attribute */
+	NETFS_XATTR_GET,	/* Get extended attribute */
+
+@ext - external flags. Used by different commands to specify some extra arguments
+	like partial size of the embedded objects or creation flags.
+
+@size - size of the attached data. For NETFS_READ_PAGE and NETFS_READ_PAGES no data is attached,
+	but size of the requested data is incorporated here. It does not include size of the command
+	header (struct netfs_cmd) itself.
+
+@id - id of the object this command operates on. Each command can use it for own purpose.
+
+@start - start of the object this command operates on. Each command can use it for own purpose.
+
+@csize, @cpad - size and padding size of the (attached if needed) crypto information.
+
+Command specifications.
+
+@NETFS_READDIR
+This command is used to sync content of the remote dir to the client.
+
+@ext - length of the path to object.
+@size - the same.
+@id - local inode number of the directory to read.
+@start - zero.
+
+
+@NETFS_READ_PAGE
+This command is used to read data from remote server.
+Data size does not exceed local page cache size.
+
+@id - inode number.
+@start - first byte offset.
+@size - number of bytes to read plus length of the path to object.
+@ext - object path length.
+
+
+@NETFS_CREATE
+Used to create object.
+It does not require that all directories on top of the object were
+already created, it will create them automatically. Each object has
+associated @netfs_path_entry data structure, which contains creation
+mode (permissions and type) and length of the name as long as name itself.
+
+@start - 0
+@size - size of the all data structures needed to create a path
+@id - local inode number
+@ext - 0
+
+
+@NETFS_REMOVE
+Used to remove object.
+
+@ext - length of the path to object.
+@size - the same.
+@id - local inode number.
+@start - zero.
+
+
+@NETFS_LOOKUP
+Lookup information about object on server.
+
+@ext - length of the path to object.
+@size - the same.
+@id - local inode number of the directory to look object in.
+@start - local inode number of the object to look at.
+
+
+@NETFS_LINK
+Create hard of symlink.
+Command is sent as "object_path|target_path".
+
+@size - size of the above string.
+@id - parent local inode number.
+@start - 1 for symlink, 0 for hardlink.
+@ext - size of the "object_path" above.
+
+
+@NETFS_TRANS
+Transaction header.
+
+@size - incorporates all embedded command sizes including theirs header sizes.
+@start - transaction generation number - unique id used to find transaction.
+@ext - transaction flags. Unused at the moment.
+@id - 0.
+
+
+@NETFS_OPEN
+Open intent for given transaction.
+
+@id - local inode number.
+@start - 0.
+@size - path length to the object.
+@ext - open flags (O_RDWR and so on).
+
+
+@NETFS_INODE_INFO
+Metadata update command.
+It is sent to servers when attributes of the object are changed and received
+when data or metadata were updated. It operates with the following structure:
+
+struct netfs_inode_info
+{
+	unsigned int		mode;
+	unsigned int		nlink;
+	unsigned int		uid;
+	unsigned int		gid;
+	unsigned int		blocksize;
+	unsigned int		padding;
+	__u64			ino;
+	__u64			blocks;
+	__u64			rdev;
+	__u64			size;
+	__u64			version;
+};
+
+It effectively mirrors stat(2) returned data.
+
+
+@ext - path length to the object.
+@size - the same plus size of the netfs_inode_info structure.
+@id - local inode number.
+@start - 0.
+
+
+@NETFS_PAGE_CACHE
+Command is only received by clients. It contains information about
+page to be marked as not up-to-date.
+
+@id - client's inode number.
+@start - last byte of the page to be invalidated. If it is not equal to
+	current inode size, it will be vmtruncated().
+@size - 0
+@ext - 0
+
+
+@NETFS_READ_PAGES
+Used to read multiple contiguous pages in one go.
+
+@start - first byte of the contiguous region to read.
+@size - contains of two fields: lower 8 bits are used to represent page cache shift
+	used by client, another 3 bytes are used to get number of pages.
+@id - local inode number.
+@ext - path length to the object.
+
+
+@NETFS_RENAME
+Used to rename object.
+Attached data is formed into following string: "old_path|new_path".
+
+@id - local inode number.
+@start - parent inode number.
+@size - length of the above string.
+@ext - length of the old path part.
+
+
+@NETFS_CAPABILITIES
+Used to exchange crypto capabilities with server.
+If crypto capabilities are not supported by server, then client will disable it
+or fail (if 'crypto_fail_unsupported' mount options was specified).
+
+@id - superblock index. Used to specify crypto information for group of servers.
+@size - size of the attached capabilities structure.
+@start - 0.
+@size - 0.
+@scsize - 0.
+
+@NETFS_LOCK
+Used to send lock request/release messages. Although it sends byte range request
+and is capable of flushing pages based on that, it is not used, since all Linux
+filesystems lock the whole inode.
+
+@id - lock generation number.
+@start - start of the locked range.
+@size - size of the locked range.
+@ext - lock type: read/write. Not used actually. 15'th bit is used to determine,
+	if it is lock request (1) or release (0).
+
+@NETFS_XATTR_SET
+@NETFS_XATTR_GET
+Used to set/get extended attributes for given inode.
+@id - attribute generation number or xattr setting type
+@start - size of the attribute (request or attached)
+@size - name length, path len and data size for given attribute
+@ext - path length for given object
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index a87be42f821..ce84cfc9eae 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -5,6 +5,7 @@
                   Bodo Bauer <bb@ricochet.net>
 
 2.4.x update	  Jorge Nerin <comandante@zaralinux.com>      November 14 2000
+move /proc/sys	  Shen Feng <shen@cn.fujitsu.com>		    April 1 2009
 ------------------------------------------------------------------------------
 Version 1.3                                              Kernel version 2.2.12
 					      Kernel version 2.4.0-test11-pre4
@@ -26,25 +27,17 @@ Table of Contents
   1.6	Parallel port info in /proc/parport
   1.7	TTY info in /proc/tty
   1.8	Miscellaneous kernel statistics in /proc/stat
+  1.9 Ext4 file system parameters
 
   2	Modifying System Parameters
-  2.1	/proc/sys/fs - File system data
-  2.2	/proc/sys/fs/binfmt_misc - Miscellaneous binary formats
-  2.3	/proc/sys/kernel - general kernel parameters
-  2.4	/proc/sys/vm - The virtual memory subsystem
-  2.5	/proc/sys/dev - Device specific parameters
-  2.6	/proc/sys/sunrpc - Remote procedure calls
-  2.7	/proc/sys/net - Networking stuff
-  2.8	/proc/sys/net/ipv4 - IPV4 settings
-  2.9	Appletalk
-  2.10	IPX
-  2.11	/proc/sys/fs/mqueue - POSIX message queues filesystem
-  2.12	/proc/<pid>/oom_adj - Adjust the oom-killer score
-  2.13	/proc/<pid>/oom_score - Display current oom-killer score
-  2.14	/proc/<pid>/io - Display the IO accounting fields
-  2.15	/proc/<pid>/coredump_filter - Core dump filtering settings
-  2.16	/proc/<pid>/mountinfo - Information about mounts
-  2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
+
+  3	Per-Process Parameters
+  3.1	/proc/<pid>/oom_adj - Adjust the oom-killer score
+  3.2	/proc/<pid>/oom_score - Display current oom-killer score
+  3.3	/proc/<pid>/io - Display the IO accounting fields
+  3.4	/proc/<pid>/coredump_filter - Core dump filtering settings
+  3.5	/proc/<pid>/mountinfo - Information about mounts
+
 
 ------------------------------------------------------------------------------
 Preface
@@ -940,27 +933,6 @@ Table 1-10: Files in /proc/fs/ext4/<devname>
  File            Content                                        
  mb_groups       details of multiblock allocator buddy cache of free blocks
  mb_history      multiblock allocation history
- stats           controls whether the multiblock allocator should start
-                 collecting statistics, which are shown during the unmount
- group_prealloc  the multiblock allocator will round up allocation
-                 requests to a multiple of this tuning parameter if the
-                 stripe size is not set in the ext4 superblock
- max_to_scan     The maximum number of extents the multiblock allocator
-                 will search to find the best extent
- min_to_scan     The minimum number of extents the multiblock allocator
-                 will search to find the best extent
- order2_req      Tuning parameter which controls the minimum size for 
-                 requests (as a power of 2) where the buddy cache is
-                 used
- stream_req      Files which have fewer blocks than this tunable
-                 parameter will have their blocks allocated out of a
-                 block group specific preallocation pool, so that small
-                 files are packed closely together.  Each large file
-                 will have its blocks allocated out of its own unique
-                 preallocation pool.
-inode_readahead  Tuning parameter which controls the maximum number of
-                 inode table blocks that ext4's inode table readahead
-                 algorithm will pre-read into the buffer cache
 ..............................................................................
 
 
@@ -1011,1014 +983,24 @@ review the kernel documentation in the directory /usr/src/linux/Documentation.
 This chapter  is  heavily  based  on the documentation included in the pre 2.2
 kernels, and became part of it in version 2.2.1 of the Linux kernel.
 
-2.1 /proc/sys/fs - File system data
------------------------------------
-
-This subdirectory  contains  specific  file system, file handle, inode, dentry
-and quota information.
-
-Currently, these files are in /proc/sys/fs:
-
-dentry-state
-------------
-
-Status of  the  directory  cache.  Since  directory  entries  are  dynamically
-allocated and  deallocated,  this  file indicates the current status. It holds
-six values, in which the last two are not used and are always zero. The others
-are listed in table 2-1.
-
-
-Table 2-1: Status files of the directory cache 
-..............................................................................
- File       Content                                                            
- nr_dentry  Almost always zero                                                 
- nr_unused  Number of unused cache entries                                     
- age_limit  
-            in seconds after the entry may be reclaimed, when memory is short 
- want_pages internally                                                         
-..............................................................................
-
-dquot-nr and dquot-max
-----------------------
-
-The file dquot-max shows the maximum number of cached disk quota entries.
-
-The file  dquot-nr  shows  the  number of allocated disk quota entries and the
-number of free disk quota entries.
-
-If the number of available cached disk quotas is very low and you have a large
-number of simultaneous system users, you might want to raise the limit.
-
-file-nr and file-max
---------------------
-
-The kernel  allocates file handles dynamically, but doesn't free them again at
-this time.
-
-The value  in  file-max  denotes  the  maximum number of file handles that the
-Linux kernel will allocate. When you get a lot of error messages about running
-out of  file handles, you might want to raise this limit. The default value is
-10% of  RAM in kilobytes.  To  change it, just  write the new number  into the
-file:
-
-  # cat /proc/sys/fs/file-max 
-  4096 
-  # echo 8192 > /proc/sys/fs/file-max 
-  # cat /proc/sys/fs/file-max 
-  8192 
-
-
-This method  of  revision  is  useful  for  all customizable parameters of the
-kernel - simply echo the new value to the corresponding file.
-
-Historically, the three values in file-nr denoted the number of allocated file
-handles,  the number of  allocated but  unused file  handles, and  the maximum
-number of file handles. Linux 2.6 always  reports 0 as the number of free file
-handles -- this  is not an error,  it just means that the  number of allocated
-file handles exactly matches the number of used file handles.
-
-Attempts to  allocate more  file descriptors than  file-max are  reported with
-printk, look for "VFS: file-max limit <number> reached".
-
-inode-state and inode-nr
-------------------------
-
-The file inode-nr contains the first two items from inode-state, so we'll skip
-to that file...
-
-inode-state contains  two  actual numbers and five dummy values. The numbers
-are nr_inodes and nr_free_inodes (in order of appearance).
-
-nr_inodes
-~~~~~~~~~
-
-Denotes the  number  of  inodes the system has allocated. This number will
-grow and shrink dynamically.
-
-nr_open
--------
-
-Denotes the maximum number of file-handles a process can
-allocate. Default value is 1024*1024 (1048576) which should be
-enough for most machines. Actual limit depends on RLIMIT_NOFILE
-resource limit.
-
-nr_free_inodes
---------------
-
-Represents the  number of free inodes. Ie. The number of inuse inodes is
-(nr_inodes - nr_free_inodes).
-
-aio-nr and aio-max-nr
----------------------
-
-aio-nr is the running total of the number of events specified on the
-io_setup system call for all currently active aio contexts.  If aio-nr
-reaches aio-max-nr then io_setup will fail with EAGAIN.  Note that
-raising aio-max-nr does not result in the pre-allocation or re-sizing
-of any kernel data structures.
-
-2.2 /proc/sys/fs/binfmt_misc - Miscellaneous binary formats
------------------------------------------------------------
-
-Besides these  files, there is the subdirectory /proc/sys/fs/binfmt_misc. This
-handles the kernel support for miscellaneous binary formats.
-
-Binfmt_misc provides  the ability to register additional binary formats to the
-Kernel without  compiling  an additional module/kernel. Therefore, binfmt_misc
-needs to  know magic numbers at the beginning or the filename extension of the
-binary.
-
-It works by maintaining a linked list of structs that contain a description of
-a binary  format,  including  a  magic  with size (or the filename extension),
-offset and  mask,  and  the  interpreter name. On request it invokes the given
-interpreter with  the  original  program  as  argument,  as  binfmt_java  and
-binfmt_em86 and  binfmt_mz  do.  Since binfmt_misc does not define any default
-binary-formats, you have to register an additional binary-format.
-
-There are two general files in binfmt_misc and one file per registered format.
-The two general files are register and status.
-
-Registering a new binary format
--------------------------------
-
-To register a new binary format you have to issue the command
-
-  echo :name:type:offset:magic:mask:interpreter: > /proc/sys/fs/binfmt_misc/register 
-
-
-
-with appropriate  name (the name for the /proc-dir entry), offset (defaults to
-0, if  omitted),  magic, mask (which can be omitted, defaults to all 0xff) and
-last but  not  least,  the  interpreter that is to be invoked (for example and
-testing /bin/echo).  Type  can be M for usual magic matching or E for filename
-extension matching (give extension in place of magic).
-
-Check or reset the status of the binary format handler
-------------------------------------------------------
-
-If you  do a cat on the file /proc/sys/fs/binfmt_misc/status, you will get the
-current status (enabled/disabled) of binfmt_misc. Change the status by echoing
-0 (disables)  or  1  (enables)  or  -1  (caution:  this  clears all previously
-registered binary  formats)  to status. For example echo 0 > status to disable
-binfmt_misc (temporarily).
-
-Status of a single handler
---------------------------
-
-Each registered  handler has an entry in /proc/sys/fs/binfmt_misc. These files
-perform the  same function as status, but their scope is limited to the actual
-binary format.  By  cating this file, you also receive all related information
-about the interpreter/magic of the binfmt.
-
-Example usage of binfmt_misc (emulate binfmt_java)
---------------------------------------------------
-
-  cd /proc/sys/fs/binfmt_misc  
-  echo ':Java:M::\xca\xfe\xba\xbe::/usr/local/java/bin/javawrapper:' > register  
-  echo ':HTML:E::html::/usr/local/java/bin/appletviewer:' > register  
-  echo ':Applet:M::<!--applet::/usr/local/java/bin/appletviewer:' > register 
-  echo ':DEXE:M::\x0eDEX::/usr/bin/dosexec:' > register 
-
-
-These four  lines  add  support  for  Java  executables and Java applets (like
-binfmt_java, additionally  recognizing the .html extension with no need to put
-<!--applet> to  every  applet  file).  You  have  to  install  the JDK and the
-shell-script /usr/local/java/bin/javawrapper  too.  It  works  around  the
-brokenness of  the Java filename handling. To add a Java binary, just create a
-link to the class-file somewhere in the path.
-
-2.3 /proc/sys/kernel - general kernel parameters
-------------------------------------------------
-
-This directory  reflects  general  kernel  behaviors. As I've said before, the
-contents depend  on  your  configuration.  Here you'll find the most important
-files, along with descriptions of what they mean and how to use them.
-
-acct
-----
-
-The file contains three values; highwater, lowwater, and frequency.
-
-It exists  only  when  BSD-style  process  accounting is enabled. These values
-control its behavior. If the free space on the file system where the log lives
-goes below  lowwater  percentage,  accounting  suspends.  If  it  goes  above
-highwater percentage,  accounting  resumes. Frequency determines how often you
-check the amount of free space (value is in seconds). Default settings are: 4,
-2, and  30.  That is, suspend accounting if there is less than 2 percent free;
-resume it  if we have a value of 3 or more percent; consider information about
-the amount of free space valid for 30 seconds
-
-ctrl-alt-del
-------------
-
-When the value in this file is 0, ctrl-alt-del is trapped and sent to the init
-program to  handle a graceful restart. However, when the value is greater that
-zero, Linux's  reaction  to  this key combination will be an immediate reboot,
-without syncing its dirty buffers.
-
-[NOTE]
-    When a  program  (like  dosemu)  has  the  keyboard  in  raw  mode,  the
-    ctrl-alt-del is  intercepted  by  the  program  before it ever reaches the
-    kernel tty  layer,  and  it is up to the program to decide what to do with
-    it.
-
-domainname and hostname
------------------------
-
-These files  can  be controlled to set the NIS domainname and hostname of your
-box. For the classic darkstar.frop.org a simple:
-
-  # echo "darkstar" > /proc/sys/kernel/hostname 
-  # echo "frop.org" > /proc/sys/kernel/domainname 
-
-
-would suffice to set your hostname and NIS domainname.
-
-osrelease, ostype and version
------------------------------
-
-The names make it pretty obvious what these fields contain:
-
-  > cat /proc/sys/kernel/osrelease 
-  2.2.12 
-   
-  > cat /proc/sys/kernel/ostype 
-  Linux 
-   
-  > cat /proc/sys/kernel/version 
-  #4 Fri Oct 1 12:41:14 PDT 1999 
-
-
-The files  osrelease and ostype should be clear enough. Version needs a little
-more clarification.  The  #4 means that this is the 4th kernel built from this
-source base and the date after it indicates the time the kernel was built. The
-only way to tune these values is to rebuild the kernel.
-
-panic
------
-
-The value  in  this  file  represents  the  number of seconds the kernel waits
-before rebooting  on  a  panic.  When  you  use  the  software  watchdog,  the
-recommended setting  is  60. If set to 0, the auto reboot after a kernel panic
-is disabled, which is the default setting.
-
-printk
-------
-
-The four values in printk denote
-* console_loglevel,
-* default_message_loglevel,
-* minimum_console_loglevel and
-* default_console_loglevel
-respectively.
-
-These values  influence  printk()  behavior  when  printing  or  logging error
-messages, which  come  from  inside  the  kernel.  See  syslog(2)  for  more
-information on the different log levels.
-
-console_loglevel
-----------------
-
-Messages with a higher priority than this will be printed to the console.
-
-default_message_level
----------------------
-
-Messages without an explicit priority will be printed with this priority.
-
-minimum_console_loglevel
-------------------------
-
-Minimum (highest) value to which the console_loglevel can be set.
-
-default_console_loglevel
-------------------------
-
-Default value for console_loglevel.
-
-sg-big-buff
------------
-
-This file  shows  the size of the generic SCSI (sg) buffer. At this point, you
-can't tune  it  yet,  but  you  can  change  it  at  compile  time  by editing
-include/scsi/sg.h and changing the value of SG_BIG_BUFF.
-
-If you use a scanner with SANE (Scanner Access Now Easy) you might want to set
-this to a higher value. Refer to the SANE documentation on this issue.
-
-modprobe
---------
-
-The location  where  the  modprobe  binary  is  located.  The kernel uses this
-program to load modules on demand.
-
-unknown_nmi_panic
------------------
-
-The value in this file affects behavior of handling NMI. When the value is
-non-zero, unknown NMI is trapped and then panic occurs. At that time, kernel
-debugging information is displayed on console.
-
-NMI switch that most IA32 servers have fires unknown NMI up, for example.
-If a system hangs up, try pressing the NMI switch.
-
-panic_on_unrecovered_nmi
-------------------------
-
-The default Linux behaviour on an NMI of either memory or unknown is to continue
-operation. For many environments such as scientific computing it is preferable
-that the box is taken out and the error dealt with than an uncorrected
-parity/ECC error get propogated.
-
-A small number of systems do generate NMI's for bizarre random reasons such as
-power management so the default is off. That sysctl works like the existing
-panic controls already in that directory.
-
-nmi_watchdog
-------------
-
-Enables/Disables the NMI watchdog on x86 systems.  When the value is non-zero
-the NMI watchdog is enabled and will continuously test all online cpus to
-determine whether or not they are still functioning properly. Currently,
-passing "nmi_watchdog=" parameter at boot time is required for this function
-to work.
-
-If LAPIC NMI watchdog method is in use (nmi_watchdog=2 kernel parameter), the
-NMI watchdog shares registers with oprofile. By disabling the NMI watchdog,
-oprofile may have more registers to utilize.
-
-msgmni
-------
-
-Maximum number of message queue ids on the system.
-This value scales to the amount of lowmem. It is automatically recomputed
-upon memory add/remove or ipc namespace creation/removal.
-When a value is written into this file, msgmni's value becomes fixed, i.e. it
-is not recomputed anymore when one of the above events occurs.
-Use auto_msgmni to change this behavior.
-
-auto_msgmni
------------
-
-Enables/Disables automatic recomputing of msgmni upon memory add/remove or
-upon ipc namespace creation/removal (see the msgmni description above).
-Echoing "1" into this file enables msgmni automatic recomputing.
-Echoing "0" turns it off.
-auto_msgmni default value is 1.
-
-
-2.4 /proc/sys/vm - The virtual memory subsystem
------------------------------------------------
-
-Please see: Documentation/sysctls/vm.txt for a description of these
+Please see: Documentation/sysctls/ directory for descriptions of these
 entries.
 
+------------------------------------------------------------------------------
+Summary
+------------------------------------------------------------------------------
+Certain aspects  of  kernel  behavior  can be modified at runtime, without the
+need to  recompile  the kernel, or even to reboot the system. The files in the
+/proc/sys tree  can  not only be read, but also modified. You can use the echo
+command to write value into these files, thereby changing the default settings
+of the kernel.
+------------------------------------------------------------------------------
 
-2.5 /proc/sys/dev - Device specific parameters
-----------------------------------------------
-
-Currently there is only support for CDROM drives, and for those, there is only
-one read-only  file containing information about the CD-ROM drives attached to
-the system:
-
-  >cat /proc/sys/dev/cdrom/info 
-  CD-ROM information, Id: cdrom.c 2.55 1999/04/25 
-   
-  drive name:             sr0     hdb 
-  drive speed:            32      40 
-  drive # of slots:       1       0 
-  Can close tray:         1       1 
-  Can open tray:          1       1 
-  Can lock tray:          1       1 
-  Can change speed:       1       1 
-  Can select disk:        0       1 
-  Can read multisession:  1       1 
-  Can read MCN:           1       1 
-  Reports media changed:  1       1 
-  Can play audio:         1       1 
-
-
-You see two drives, sr0 and hdb, along with a list of their features.
-
-2.6 /proc/sys/sunrpc - Remote procedure calls
----------------------------------------------
-
-This directory  contains four files, which enable or disable debugging for the
-RPC functions NFS, NFS-daemon, RPC and NLM. The default values are 0. They can
-be set to one to turn debugging on. (The default value is 0 for each)
-
-2.7 /proc/sys/net - Networking stuff
-------------------------------------
-
-The interface  to  the  networking  parts  of  the  kernel  is  located  in
-/proc/sys/net. Table  2-3  shows all possible subdirectories. You may see only
-some of them, depending on your kernel's configuration.
-
-
-Table 2-3: Subdirectories in /proc/sys/net 
-..............................................................................
- Directory Content             Directory  Content            
- core      General parameter   appletalk  Appletalk protocol 
- unix      Unix domain sockets netrom     NET/ROM            
- 802       E802 protocol       ax25       AX25               
- ethernet  Ethernet protocol   rose       X.25 PLP layer     
- ipv4      IP version 4        x25        X.25 protocol      
- ipx       IPX                 token-ring IBM token ring     
- bridge    Bridging            decnet     DEC net            
- ipv6      IP version 6                   
-..............................................................................
-
-We will  concentrate  on IP networking here. Since AX15, X.25, and DEC Net are
-only minor players in the Linux world, we'll skip them in this chapter. You'll
-find some  short  info on Appletalk and IPX further on in this chapter. Review
-the online  documentation  and the kernel source to get a detailed view of the
-parameters for  those  protocols.  In  this  section  we'll  discuss  the
-subdirectories printed  in  bold letters in the table above. As default values
-are suitable for most needs, there is no need to change these values.
-
-/proc/sys/net/core - Network core options
------------------------------------------
-
-rmem_default
-------------
-
-The default setting of the socket receive buffer in bytes.
-
-rmem_max
---------
-
-The maximum receive socket buffer size in bytes.
-
-wmem_default
-------------
-
-The default setting (in bytes) of the socket send buffer.
-
-wmem_max
---------
-
-The maximum send socket buffer size in bytes.
-
-message_burst and message_cost
-------------------------------
-
-These parameters  are used to limit the warning messages written to the kernel
-log from  the  networking  code.  They  enforce  a  rate  limit  to  make  a
-denial-of-service attack  impossible. A higher message_cost factor, results in
-fewer messages that will be written. Message_burst controls when messages will
-be dropped.  The  default  settings  limit  warning messages to one every five
-seconds.
-
-warnings
---------
-
-This controls console messages from the networking stack that can occur because
-of problems on the network like duplicate address or bad checksums. Normally,
-this should be enabled, but if the problem persists the messages can be
-disabled.
-
-
-netdev_max_backlog
-------------------
-
-Maximum number  of  packets,  queued  on  the  INPUT  side, when the interface
-receives packets faster than kernel can process them.
-
-optmem_max
-----------
-
-Maximum ancillary buffer size allowed per socket. Ancillary data is a sequence
-of struct cmsghdr structures with appended data.
-
-/proc/sys/net/unix - Parameters for Unix domain sockets
--------------------------------------------------------
-
-There are  only  two  files  in this subdirectory. They control the delays for
-deleting and destroying socket descriptors.
-
-2.8 /proc/sys/net/ipv4 - IPV4 settings
---------------------------------------
-
-IP version  4  is  still the most used protocol in Unix networking. It will be
-replaced by  IP version 6 in the next couple of years, but for the moment it's
-the de  facto  standard  for  the  internet  and  is  used  in most networking
-environments around  the  world.  Because  of the importance of this protocol,
-we'll have a deeper look into the subtree controlling the behavior of the IPv4
-subsystem of the Linux kernel.
-
-Let's start with the entries in /proc/sys/net/ipv4.
-
-ICMP settings
--------------
-
-icmp_echo_ignore_all and icmp_echo_ignore_broadcasts
-----------------------------------------------------
-
-Turn on (1) or off (0), if the kernel should ignore all ICMP ECHO requests, or
-just those to broadcast and multicast addresses.
-
-Please note that if you accept ICMP echo requests with a broadcast/multi\-cast
-destination address  your  network  may  be  used as an exploder for denial of
-service packet flooding attacks to other hosts.
-
-icmp_destunreach_rate, icmp_echoreply_rate, icmp_paramprob_rate and icmp_timeexeed_rate
----------------------------------------------------------------------------------------
-
-Sets limits  for  sending  ICMP  packets  to specific targets. A value of zero
-disables all  limiting.  Any  positive  value sets the maximum package rate in
-hundredth of a second (on Intel systems).
-
-IP settings
------------
-
-ip_autoconfig
--------------
-
-This file contains the number one if the host received its IP configuration by
-RARP, BOOTP, DHCP or a similar mechanism. Otherwise it is zero.
-
-ip_default_ttl
---------------
-
-TTL (Time  To  Live) for IPv4 interfaces. This is simply the maximum number of
-hops a packet may travel.
-
-ip_dynaddr
-----------
-
-Enable dynamic  socket  address rewriting on interface address change. This is
-useful for dialup interface with changing IP addresses.
-
-ip_forward
-----------
-
-Enable or  disable forwarding of IP packages between interfaces. Changing this
-value resets  all other parameters to their default values. They differ if the
-kernel is configured as host or router.
-
-ip_local_port_range
--------------------
-
-Range of  ports  used  by  TCP  and UDP to choose the local port. Contains two
-numbers, the  first  number  is the lowest port, the second number the highest
-local port.  Default  is  1024-4999.  Should  be  changed  to  32768-61000 for
-high-usage systems.
-
-ip_no_pmtu_disc
----------------
-
-Global switch  to  turn  path  MTU  discovery off. It can also be set on a per
-socket basis by the applications or on a per route basis.
-
-ip_masq_debug
--------------
-
-Enable/disable debugging of IP masquerading.
-
-IP fragmentation settings
--------------------------
-
-ipfrag_high_trash and ipfrag_low_trash
---------------------------------------
-
-Maximum memory  used to reassemble IP fragments. When ipfrag_high_thresh bytes
-of memory  is  allocated  for  this  purpose,  the  fragment handler will toss
-packets until ipfrag_low_thresh is reached.
-
-ipfrag_time
------------
-
-Time in seconds to keep an IP fragment in memory.
-
-TCP settings
-------------
-
-tcp_ecn
--------
-
-This file controls the use of the ECN bit in the IPv4 headers. This is a new
-feature about Explicit Congestion Notification, but some routers and firewalls
-block traffic that has this bit set, so it could be necessary to echo 0 to
-/proc/sys/net/ipv4/tcp_ecn if you want to talk to these sites. For more info
-you could read RFC2481.
-
-tcp_retrans_collapse
---------------------
-
-Bug-to-bug compatibility with some broken printers. On retransmit, try to send
-larger packets to work around bugs in certain TCP stacks. Can be turned off by
-setting it to zero.
-
-tcp_keepalive_probes
---------------------
-
-Number of  keep  alive  probes  TCP  sends  out,  until  it  decides  that the
-connection is broken.
-
-tcp_keepalive_time
-------------------
-
-How often  TCP  sends out keep alive messages, when keep alive is enabled. The
-default is 2 hours.
-
-tcp_syn_retries
----------------
-
-Number of  times  initial  SYNs  for  a  TCP  connection  attempt  will  be
-retransmitted. Should  not  be  higher  than 255. This is only the timeout for
-outgoing connections,  for  incoming  connections the number of retransmits is
-defined by tcp_retries1.
-
-tcp_sack
---------
-
-Enable select acknowledgments after RFC2018.
-
-tcp_timestamps
---------------
-
-Enable timestamps as defined in RFC1323.
-
-tcp_stdurg
-----------
-
-Enable the  strict  RFC793 interpretation of the TCP urgent pointer field. The
-default is  to  use  the  BSD  compatible interpretation of the urgent pointer
-pointing to the first byte after the urgent data. The RFC793 interpretation is
-to have  it  point  to  the last byte of urgent data. Enabling this option may
-lead to interoperability problems. Disabled by default.
-
-tcp_syncookies
---------------
-
-Only valid  when  the  kernel  was  compiled  with CONFIG_SYNCOOKIES. Send out
-syncookies when  the  syn backlog queue of a socket overflows. This is to ward
-off the common 'syn flood attack'. Disabled by default.
-
-Note that  the  concept  of a socket backlog is abandoned. This means the peer
-may not  receive  reliable  error  messages  from  an  over loaded server with
-syncookies enabled.
-
-tcp_window_scaling
-------------------
-
-Enable window scaling as defined in RFC1323.
-
-tcp_fin_timeout
----------------
-
-The length  of  time  in  seconds  it  takes to receive a final FIN before the
-socket is  always  closed.  This  is  strictly  a  violation  of  the  TCP
-specification, but required to prevent denial-of-service attacks.
-
-tcp_max_ka_probes
------------------
-
-Indicates how  many  keep alive probes are sent per slow timer run. Should not
-be set too high to prevent bursts.
-
-tcp_max_syn_backlog
--------------------
-
-Length of  the per socket backlog queue. Since Linux 2.2 the backlog specified
-in listen(2)  only  specifies  the  length  of  the  backlog  queue of already
-established sockets. When more connection requests arrive Linux starts to drop
-packets. When  syncookies  are  enabled the packets are still answered and the
-maximum queue is effectively ignored.
-
-tcp_retries1
-------------
-
-Defines how  often  an  answer  to  a  TCP connection request is retransmitted
-before giving up.
-
-tcp_retries2
-------------
-
-Defines how often a TCP packet is retransmitted before giving up.
-
-Interface specific settings
----------------------------
-
-In the directory /proc/sys/net/ipv4/conf you'll find one subdirectory for each
-interface the  system  knows about and one directory calls all. Changes in the
-all subdirectory  affect  all  interfaces,  whereas  changes  in  the  other
-subdirectories affect  only  one  interface.  All  directories  have  the same
-entries:
-
-accept_redirects
-----------------
-
-This switch  decides  if the kernel accepts ICMP redirect messages or not. The
-default is 'yes' if the kernel is configured for a regular host and 'no' for a
-router configuration.
-
-accept_source_route
--------------------
-
-Should source  routed  packages  be  accepted  or  declined.  The  default  is
-dependent on  the  kernel  configuration.  It's 'yes' for routers and 'no' for
-hosts.
-
-bootp_relay
-~~~~~~~~~~~
-
-Accept packets  with source address 0.b.c.d with destinations not to this host
-as local ones. It is supposed that a BOOTP relay daemon will catch and forward
-such packets.
-
-The default  is  0,  since this feature is not implemented yet (kernel version
-2.2.12).
-
-forwarding
-----------
-
-Enable or disable IP forwarding on this interface.
-
-log_martians
-------------
-
-Log packets with source addresses with no known route to kernel log.
-
-mc_forwarding
--------------
-
-Do multicast routing. The kernel needs to be compiled with CONFIG_MROUTE and a
-multicast routing daemon is required.
-
-proxy_arp
----------
-
-Does (1) or does not (0) perform proxy ARP.
-
-rp_filter
----------
-
-Integer value determines if a source validation should be made. 1 means yes, 0
-means no.  Disabled by default, but local/broadcast address spoofing is always
-on.
-
-If you  set this to 1 on a router that is the only connection for a network to
-the net,  it  will  prevent  spoofing  attacks  against your internal networks
-(external addresses  can  still  be  spoofed), without the need for additional
-firewall rules.
-
-secure_redirects
-----------------
-
-Accept ICMP  redirect  messages  only  for gateways, listed in default gateway
-list. Enabled by default.
-
-shared_media
-------------
-
-If it  is  not  set  the kernel does not assume that different subnets on this
-device can communicate directly. Default setting is 'yes'.
-
-send_redirects
---------------
-
-Determines whether to send ICMP redirects to other hosts.
-
-Routing settings
-----------------
-
-The directory  /proc/sys/net/ipv4/route  contains  several  file  to  control
-routing issues.
-
-error_burst and error_cost
---------------------------
-
-These  parameters  are used to limit how many ICMP destination unreachable to 
-send  from  the  host  in question. ICMP destination unreachable messages are 
-sent  when  we  cannot reach  the next hop while trying to transmit a packet. 
-It  will also print some error messages to kernel logs if someone is ignoring 
-our   ICMP  redirects.  The  higher  the  error_cost  factor  is,  the  fewer 
-destination  unreachable  and error messages will be let through. Error_burst 
-controls  when  destination  unreachable  messages and error messages will be
-dropped. The default settings limit warning messages to five every second.
-
-flush
------
-
-Writing to this file results in a flush of the routing cache.
-
-gc_elasticity, gc_interval, gc_min_interval_ms, gc_timeout, gc_thresh
----------------------------------------------------------------------
-
-Values to  control  the  frequency  and  behavior  of  the  garbage collection
-algorithm for the routing cache. gc_min_interval is deprecated and replaced
-by gc_min_interval_ms.
-
-
-max_size
---------
-
-Maximum size  of  the routing cache. Old entries will be purged once the cache
-reached has this size.
-
-redirect_load, redirect_number
-------------------------------
-
-Factors which  determine  if  more ICPM redirects should be sent to a specific
-host. No  redirects  will be sent once the load limit or the maximum number of
-redirects has been reached.
-
-redirect_silence
-----------------
-
-Timeout for redirects. After this period redirects will be sent again, even if
-this has been stopped, because the load or number limit has been reached.
-
-Network Neighbor handling
--------------------------
-
-Settings about how to handle connections with direct neighbors (nodes attached
-to the same link) can be found in the directory /proc/sys/net/ipv4/neigh.
-
-As we  saw  it  in  the  conf directory, there is a default subdirectory which
-holds the  default  values, and one directory for each interface. The contents
-of the  directories  are identical, with the single exception that the default
-settings contain additional options to set garbage collection parameters.
-
-In the interface directories you'll find the following entries:
-
-base_reachable_time, base_reachable_time_ms
--------------------------------------------
-
-A base  value  used for computing the random reachable time value as specified
-in RFC2461.
-
-Expression of base_reachable_time, which is deprecated, is in seconds.
-Expression of base_reachable_time_ms is in milliseconds.
-
-retrans_time, retrans_time_ms
------------------------------
-
-The time between retransmitted Neighbor Solicitation messages.
-Used for address resolution and to determine if a neighbor is
-unreachable.
-
-Expression of retrans_time, which is deprecated, is in 1/100 seconds (for
-IPv4) or in jiffies (for IPv6).
-Expression of retrans_time_ms is in milliseconds.
-
-unres_qlen
-----------
-
-Maximum queue  length  for a pending arp request - the number of packets which
-are accepted from other layers while the ARP address is still resolved.
-
-anycast_delay
--------------
-
-Maximum for  random  delay  of  answers  to  neighbor solicitation messages in
-jiffies (1/100  sec). Not yet implemented (Linux does not have anycast support
-yet).
-
-ucast_solicit
--------------
-
-Maximum number of retries for unicast solicitation.
-
-mcast_solicit
--------------
-
-Maximum number of retries for multicast solicitation.
-
-delay_first_probe_time
-----------------------
-
-Delay for  the  first  time  probe  if  the  neighbor  is  reachable.  (see
-gc_stale_time)
-
-locktime
---------
-
-An ARP/neighbor  entry  is only replaced with a new one if the old is at least
-locktime old. This prevents ARP cache thrashing.
-
-proxy_delay
------------
-
-Maximum time  (real  time is random [0..proxytime]) before answering to an ARP
-request for  which  we have an proxy ARP entry. In some cases, this is used to
-prevent network flooding.
-
-proxy_qlen
-----------
-
-Maximum queue length of the delayed proxy arp timer. (see proxy_delay).
-
-app_solicit
-----------
-
-Determines the  number of requests to send to the user level ARP daemon. Use 0
-to turn off.
-
-gc_stale_time
--------------
-
-Determines how  often  to  check  for stale ARP entries. After an ARP entry is
-stale it  will  be resolved again (which is useful when an IP address migrates
-to another  machine).  When  ucast_solicit is greater than 0 it first tries to
-send an  ARP  packet  directly  to  the  known  host  When  that  fails  and
-mcast_solicit is greater than 0, an ARP request is broadcasted.
-
-2.9 Appletalk
--------------
-
-The /proc/sys/net/appletalk  directory  holds the Appletalk configuration data
-when Appletalk is loaded. The configurable parameters are:
-
-aarp-expiry-time
-----------------
-
-The amount  of  time  we keep an ARP entry before expiring it. Used to age out
-old hosts.
-
-aarp-resolve-time
------------------
-
-The amount of time we will spend trying to resolve an Appletalk address.
-
-aarp-retransmit-limit
----------------------
-
-The number of times we will retransmit a query before giving up.
-
-aarp-tick-time
---------------
-
-Controls the rate at which expires are checked.
-
-The directory  /proc/net/appletalk  holds the list of active Appletalk sockets
-on a machine.
-
-The fields  indicate  the DDP type, the local address (in network:node format)
-the remote  address,  the  size of the transmit pending queue, the size of the
-received queue  (bytes waiting for applications to read) the state and the uid
-owning the socket.
-
-/proc/net/atalk_iface lists  all  the  interfaces  configured for appletalk.It
-shows the  name  of the interface, its Appletalk address, the network range on
-that address  (or  network number for phase 1 networks), and the status of the
-interface.
-
-/proc/net/atalk_route lists  each  known  network  route.  It lists the target
-(network) that the route leads to, the router (may be directly connected), the
-route flags, and the device the route is using.
-
-2.10 IPX
---------
-
-The IPX protocol has no tunable values in proc/sys/net.
-
-The IPX  protocol  does,  however,  provide  proc/net/ipx. This lists each IPX
-socket giving  the  local  and  remote  addresses  in  Novell  format (that is
-network:node:port). In  accordance  with  the  strange  Novell  tradition,
-everything but the port is in hex. Not_Connected is displayed for sockets that
-are not  tied to a specific remote address. The Tx and Rx queue sizes indicate
-the number  of  bytes  pending  for  transmission  and  reception.  The  state
-indicates the  state  the  socket  is  in and the uid is the owning uid of the
-socket.
-
-The /proc/net/ipx_interface  file lists all IPX interfaces. For each interface
-it gives  the network number, the node number, and indicates if the network is
-the primary  network.  It  also  indicates  which  device  it  is bound to (or
-Internal for  internal  networks)  and  the  Frame  Type if appropriate. Linux
-supports 802.3,  802.2,  802.2  SNAP  and DIX (Blue Book) ethernet framing for
-IPX.
-
-The /proc/net/ipx_route  table  holds  a list of IPX routes. For each route it
-gives the  destination  network, the router node (or Directly) and the network
-address of the router (or Connected) for internal networks.
-
-2.11 /proc/sys/fs/mqueue - POSIX message queues filesystem
-----------------------------------------------------------
-
-The "mqueue"  filesystem provides  the necessary kernel features to enable the
-creation of a  user space  library that  implements  the  POSIX message queues
-API (as noted by the  MSG tag in the  POSIX 1003.1-2001 version  of the System
-Interfaces specification.)
-
-The "mqueue" filesystem contains values for determining/setting  the amount of
-resources used by the file system.
-
-/proc/sys/fs/mqueue/queues_max is a read/write  file for  setting/getting  the
-maximum number of message queues allowed on the system.
-
-/proc/sys/fs/mqueue/msg_max  is  a  read/write file  for  setting/getting  the
-maximum number of messages in a queue value.  In fact it is the limiting value
-for another (user) limit which is set in mq_open invocation. This attribute of
-a queue must be less or equal then msg_max.
-
-/proc/sys/fs/mqueue/msgsize_max is  a read/write  file for setting/getting the
-maximum  message size value (it is every  message queue's attribute set during
-its creation).
+------------------------------------------------------------------------------
+CHAPTER 3: PER-PROCESS PARAMETERS
+------------------------------------------------------------------------------
 
-2.12 /proc/<pid>/oom_adj - Adjust the oom-killer score
+3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score
 ------------------------------------------------------
 
 This file can be used to adjust the score used to select which processes
@@ -2055,25 +1037,15 @@ The task with the highest badness score is then selected and its children
 are killed, process itself will be killed in an OOM situation when it does
 not have children or some of them disabled oom like described above.
 
-2.13 /proc/<pid>/oom_score - Display current oom-killer score
+3.2 /proc/<pid>/oom_score - Display current oom-killer score
 -------------------------------------------------------------
 
-------------------------------------------------------------------------------
 This file can be used to check the current score used by the oom-killer is for
 any given <pid>. Use it together with /proc/<pid>/oom_adj to tune which
 process should be killed in an out-of-memory situation.
 
-------------------------------------------------------------------------------
-Summary
-------------------------------------------------------------------------------
-Certain aspects  of  kernel  behavior  can be modified at runtime, without the
-need to  recompile  the kernel, or even to reboot the system. The files in the
-/proc/sys tree  can  not only be read, but also modified. You can use the echo
-command to write value into these files, thereby changing the default settings
-of the kernel.
-------------------------------------------------------------------------------
 
-2.14  /proc/<pid>/io - Display the IO accounting fields
+3.3  /proc/<pid>/io - Display the IO accounting fields
 -------------------------------------------------------
 
 This file contains IO statistics for each running process
@@ -2175,7 +1147,7 @@ those 64-bit counters, process A could see an intermediate result.
 More information about this can be found within the taskstats documentation in
 Documentation/accounting.
 
-2.15 /proc/<pid>/coredump_filter - Core dump filtering settings
+3.4 /proc/<pid>/coredump_filter - Core dump filtering settings
 ---------------------------------------------------------------
 When a process is dumped, all anonymous memory is written to a core file as
 long as the size of the core file isn't limited. But sometimes we don't want
@@ -2219,7 +1191,7 @@ For example:
   $ echo 0x7 > /proc/self/coredump_filter
   $ ./some_program
 
-2.16	/proc/<pid>/mountinfo - Information about mounts
+3.5	/proc/<pid>/mountinfo - Information about mounts
 --------------------------------------------------------
 
 This file contains lines of the form:
@@ -2256,30 +1228,3 @@ For more information on mount propagation see:
 
   Documentation/filesystems/sharedsubtree.txt
 
-2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
---------------------------------------------------------
-
-This directory contains configuration options for the epoll(7) interface.
-
-max_user_instances
-------------------
-
-This is the maximum number of epoll file descriptors that a single user can
-have open at a given time. The default value is 128, and should be enough
-for normal users.
-
-max_user_watches
-----------------
-
-Every epoll file descriptor can store a number of files to be monitored
-for event readiness. Each one of these monitored files constitutes a "watch".
-This configuration option sets the maximum number of "watches" that are
-allowed for each user.
-Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
-on a 64bit one.
-The current default value for  max_user_watches  is the 1/32 of the available
-low memory, divided for the "watch" cost in bytes.
-
-
-------------------------------------------------------------------------------
-
diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt
index 3e79e4a7a39..b324c033035 100644
--- a/Documentation/filesystems/squashfs.txt
+++ b/Documentation/filesystems/squashfs.txt
@@ -22,7 +22,7 @@ Squashfs filesystem features versus Cramfs:
 
 				Squashfs		Cramfs
 
-Max filesystem size:		2^64			16 MiB
+Max filesystem size:		2^64			256 MiB
 Max file size:			~ 2 TiB			16 MiB
 Max files:			unlimited		unlimited
 Max directories:		unlimited		unlimited
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 68ef48839c0..26e4b8bc53e 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -9,8 +9,10 @@ that support it.  For example, a given bus might look like this:
      |   |-- class
      |   |-- config
      |   |-- device
+     |   |-- enable
      |   |-- irq
      |   |-- local_cpus
+     |   |-- remove
      |   |-- resource
      |   |-- resource0
      |   |-- resource1
@@ -32,8 +34,10 @@ files, each with their own function.
        class		   PCI class (ascii, ro)
        config		   PCI config space (binary, rw)
        device		   PCI device (ascii, ro)
+       enable	           Whether the device is enabled (ascii, rw)
        irq		   IRQ number (ascii, ro)
        local_cpus	   nearby CPU mask (cpumask, ro)
+       remove		   remove device from kernel's list (ascii, wo)
        resource		   PCI resource host addresses (ascii, ro)
        resource0..N	   PCI resource N, if present (binary, mmap)
        resource0_wc..N_wc  PCI WC map resource N, if prefetchable (binary, mmap)
@@ -44,6 +48,7 @@ files, each with their own function.
 
   ro - read only file
   rw - file is readable and writable
+  wo - write only file
   mmap - file is mmapable
   ascii - file contains ascii text
   binary - file contains binary data
@@ -57,10 +62,26 @@ used to do actual device programming from userspace.  Note that some platforms
 don't support mmapping of certain resources, so be sure to check the return
 value from any attempted mmap.
 
+The 'enable' file provides a counter that indicates how many times the device 
+has been enabled.  If the 'enable' file currently returns '4', and a '1' is
+echoed into it, it will then return '5'.  Echoing a '0' into it will decrease
+the count.  Even when it returns to 0, though, some of the initialisation
+may not be reversed.  
+
 The 'rom' file is special in that it provides read-only access to the device's
 ROM file, if available.  It's disabled by default, however, so applications
 should write the string "1" to the file to enable it before attempting a read
-call, and disable it following the access by writing "0" to the file.
+call, and disable it following the access by writing "0" to the file.  Note
+that the device must be enabled for a rom read to return data succesfully.
+In the event a driver is not bound to the device, it can be enabled using the
+'enable' file, documented above.
+
+The 'remove' file is used to remove the PCI device, by writing a non-zero
+integer to the file.  This does not involve any kind of hot-plug functionality,
+e.g. powering off the device.  The device is removed from the kernel's list of
+PCI devices, the sysfs directory for it is removed, and the device will be
+removed from any drivers attached to it. Removal of PCI root buses is
+disallowed.
 
 Accessing legacy resources through sysfs
 ----------------------------------------
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index 9e9c348275a..7e81e37c0b1 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -2,8 +2,10 @@
 sysfs - _The_ filesystem for exporting kernel objects. 
 
 Patrick Mochel	<mochel@osdl.org>
+Mike Murphy <mamurph@cs.clemson.edu>
 
-10 January 2003
+Revised:    22 February 2009
+Original:   10 January 2003
 
 
 What it is:
@@ -64,12 +66,13 @@ An attribute definition is simply:
 
 struct attribute {
         char                    * name;
+        struct module		*owner;
         mode_t                  mode;
 };
 
 
-int sysfs_create_file(struct kobject * kobj, struct attribute * attr);
-void sysfs_remove_file(struct kobject * kobj, struct attribute * attr);
+int sysfs_create_file(struct kobject * kobj, const struct attribute * attr);
+void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr);
 
 
 A bare attribute contains no means to read or write the value of the
@@ -80,9 +83,11 @@ a specific object type.
 For example, the driver model defines struct device_attribute like:
 
 struct device_attribute {
-        struct attribute        attr;
-        ssize_t (*show)(struct device * dev, char * buf);
-        ssize_t (*store)(struct device * dev, const char * buf);
+	struct attribute	attr;
+	ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count);
 };
 
 int device_create_file(struct device *, struct device_attribute *);
@@ -90,12 +95,8 @@ void device_remove_file(struct device *, struct device_attribute *);
 
 It also defines this helper for defining device attributes: 
 
-#define DEVICE_ATTR(_name, _mode, _show, _store)      \
-struct device_attribute dev_attr_##_name = {            \
-        .attr = {.name  = __stringify(_name) , .mode   = _mode },      \
-        .show   = _show,                                \
-        .store  = _store,                               \
-};
+#define DEVICE_ATTR(_name, _mode, _show, _store) \
+struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store)
 
 For example, declaring
 
@@ -107,9 +108,9 @@ static struct device_attribute dev_attr_foo = {
        .attr	= {
 		.name = "foo",
 		.mode = S_IWUSR | S_IRUGO,
+		.show = show_foo,
+		.store = store_foo,
 	},
-	.show = show_foo,
-	.store = store_foo,
 };
 
 
@@ -161,10 +162,12 @@ To read or write attributes, show() or store() methods must be
 specified when declaring the attribute. The method types should be as
 simple as those defined for device attributes:
 
-        ssize_t (*show)(struct device * dev, char * buf);
-        ssize_t (*store)(struct device * dev, const char * buf);
+ssize_t (*show)(struct device * dev, struct device_attribute * attr,
+                char * buf);
+ssize_t (*store)(struct device * dev, struct device_attribute * attr,
+                 const char * buf);
 
-IOW, they should take only an object and a buffer as parameters. 
+IOW, they should take only an object, an attribute, and a buffer as parameters.
 
 
 sysfs allocates a buffer of size (PAGE_SIZE) and passes it to the
@@ -299,14 +302,16 @@ The following interface layers currently exist in sysfs:
 Structure:
 
 struct device_attribute {
-        struct attribute        attr;
-        ssize_t (*show)(struct device * dev, char * buf);
-        ssize_t (*store)(struct device * dev, const char * buf);
+	struct attribute	attr;
+	ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count);
 };
 
 Declaring:
 
-DEVICE_ATTR(_name, _str, _mode, _show, _store);
+DEVICE_ATTR(_name, _mode, _show, _store);
 
 Creation/Removal:
 
@@ -342,7 +347,8 @@ Structure:
 struct driver_attribute {
         struct attribute        attr;
         ssize_t (*show)(struct device_driver *, char * buf);
-        ssize_t (*store)(struct device_driver *, const char * buf);
+        ssize_t (*store)(struct device_driver *, const char * buf,
+                         size_t count);
 };
 
 Declaring:
diff --git a/Documentation/filesystems/udf.txt b/Documentation/filesystems/udf.txt
index fde829a756e..902b95d0ee5 100644
--- a/Documentation/filesystems/udf.txt
+++ b/Documentation/filesystems/udf.txt
@@ -24,6 +24,8 @@ The following mount options are supported:
 
 	gid=		Set the default group.
 	umask=		Set the default umask.
+	mode=		Set the default file permissions.
+	dmode=		Set the default directory permissions.
 	uid=		Set the default user.
 	bs=		Set the block size.
 	unhide		Show otherwise hidden files.
diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt
index 803b1318b13..fd9a3e69381 100644
--- a/Documentation/ftrace.txt
+++ b/Documentation/ftrace.txt
@@ -15,31 +15,31 @@ Introduction
 
 Ftrace is an internal tracer designed to help out developers and
 designers of systems to find what is going on inside the kernel.
-It can be used for debugging or analyzing latencies and performance
-issues that take place outside of user-space.
+It can be used for debugging or analyzing latencies and
+performance issues that take place outside of user-space.
 
 Although ftrace is the function tracer, it also includes an
-infrastructure that allows for other types of tracing. Some of the
-tracers that are currently in ftrace include a tracer to trace
-context switches, the time it takes for a high priority task to
-run after it was woken up, the time interrupts are disabled, and
-more (ftrace allows for tracer plugins, which means that the list of
-tracers can always grow).
+infrastructure that allows for other types of tracing. Some of
+the tracers that are currently in ftrace include a tracer to
+trace context switches, the time it takes for a high priority
+task to run after it was woken up, the time interrupts are
+disabled, and more (ftrace allows for tracer plugins, which
+means that the list of tracers can always grow).
 
 
 The File System
 ---------------
 
-Ftrace uses the debugfs file system to hold the control files as well
-as the files to display output.
+Ftrace uses the debugfs file system to hold the control files as
+well as the files to display output.
 
 To mount the debugfs system:
 
   # mkdir /debug
   # mount -t debugfs nodev /debug
 
-(Note: it is more common to mount at /sys/kernel/debug, but for simplicity
- this document will use /debug)
+( Note: it is more common to mount at /sys/kernel/debug, but for
+  simplicity this document will use /debug)
 
 That's it! (assuming that you have ftrace configured into your kernel)
 
@@ -50,90 +50,124 @@ of ftrace. Here is a list of some of the key files:
 
  Note: all time values are in microseconds.
 
-  current_tracer: This is used to set or display the current tracer
-		that is configured.
-
-  available_tracers: This holds the different types of tracers that
-		have been compiled into the kernel. The tracers
-		listed here can be configured by echoing their name
-		into current_tracer.
-
-  tracing_enabled: This sets or displays whether the current_tracer
-		is activated and tracing or not. Echo 0 into this
-		file to disable the tracer or 1 to enable it.
-
-  trace: This file holds the output of the trace in a human readable
-		format (described below).
-
-  latency_trace: This file shows the same trace but the information
-		is organized more to display possible latencies
-		in the system (described below).
-
-  trace_pipe: The output is the same as the "trace" file but this
-		file is meant to be streamed with live tracing.
-		Reads from this file will block until new data
-		is retrieved. Unlike the "trace" and "latency_trace"
-		files, this file is a consumer. This means reading
-		from this file causes sequential reads to display
-		more current data. Once data is read from this
-		file, it is consumed, and will not be read
-		again with a sequential read. The "trace" and
-		"latency_trace" files are static, and if the
-		tracer is not adding more data, they will display
-		the same information every time they are read.
-
-  trace_options: This file lets the user control the amount of data
-		that is displayed in one of the above output
-		files.
-
-  trace_max_latency: Some of the tracers record the max latency.
-		For example, the time interrupts are disabled.
-		This time is saved in this file. The max trace
-		will also be stored, and displayed by either
-		"trace" or "latency_trace".  A new max trace will
-		only be recorded if the latency is greater than
-		the value in this file. (in microseconds)
-
-  buffer_size_kb: This sets or displays the number of kilobytes each CPU
-		buffer can hold. The tracer buffers are the same size
-		for each CPU. The displayed number is the size of the
-		CPU buffer and not total size of all buffers. The
-		trace buffers are allocated in pages (blocks of memory
-		that the kernel uses for allocation, usually 4 KB in size).
-		If the last page allocated has room for more bytes
-		than requested, the rest of the page will be used,
-		making the actual allocation bigger than requested.
-		(Note, the size may not be a multiple of the page size due
-		to buffer managment overhead.)
-
-		This can only be updated when the current_tracer
-		is set to "nop".
-
-  tracing_cpumask: This is a mask that lets the user only trace
-		on specified CPUS. The format is a hex string
-		representing the CPUS.
-
-  set_ftrace_filter: When dynamic ftrace is configured in (see the
-		section below "dynamic ftrace"), the code is dynamically
-		modified (code text rewrite) to disable calling of the
-		function profiler (mcount). This lets tracing be configured
-		in with practically no overhead in performance.  This also
-		has a side effect of enabling or disabling specific functions
-		to be traced. Echoing names of functions into this file
-		will limit the trace to only those functions.
-
-  set_ftrace_notrace: This has an effect opposite to that of
-		set_ftrace_filter. Any function that is added here will not
-		be traced. If a function exists in both set_ftrace_filter
-		and set_ftrace_notrace,	the function will _not_ be traced.
-
-  set_ftrace_pid: Have the function tracer only trace a single thread.
-
-  available_filter_functions: This lists the functions that ftrace
-		has processed and can trace. These are the function
-		names that you can pass to "set_ftrace_filter" or
-		"set_ftrace_notrace". (See the section "dynamic ftrace"
-		below for more details.)
+  current_tracer:
+
+	This is used to set or display the current tracer
+	that is configured.
+
+  available_tracers:
+
+	This holds the different types of tracers that
+	have been compiled into the kernel. The
+	tracers listed here can be configured by
+	echoing their name into current_tracer.
+
+  tracing_enabled:
+
+	This sets or displays whether the current_tracer
+	is activated and tracing or not. Echo 0 into this
+	file to disable the tracer or 1 to enable it.
+
+  trace:
+
+	This file holds the output of the trace in a human
+	readable format (described below).
+
+  latency_trace:
+
+	This file shows the same trace but the information
+	is organized more to display possible latencies
+	in the system (described below).
+
+  trace_pipe:
+
+	The output is the same as the "trace" file but this
+	file is meant to be streamed with live tracing.
+	Reads from this file will block until new data
+	is retrieved. Unlike the "trace" and "latency_trace"
+	files, this file is a consumer. This means reading
+	from this file causes sequential reads to display
+	more current data. Once data is read from this
+	file, it is consumed, and will not be read
+	again with a sequential read. The "trace" and
+	"latency_trace" files are static, and if the
+	tracer is not adding more data, they will display
+	the same information every time they are read.
+
+  trace_options:
+
+	This file lets the user control the amount of data
+	that is displayed in one of the above output
+	files.
+
+  tracing_max_latency:
+
+	Some of the tracers record the max latency.
+	For example, the time interrupts are disabled.
+	This time is saved in this file. The max trace
+	will also be stored, and displayed by either
+	"trace" or "latency_trace".  A new max trace will
+	only be recorded if the latency is greater than
+	the value in this file. (in microseconds)
+
+  buffer_size_kb:
+
+	This sets or displays the number of kilobytes each CPU
+	buffer can hold. The tracer buffers are the same size
+	for each CPU. The displayed number is the size of the
+	CPU buffer and not total size of all buffers. The
+	trace buffers are allocated in pages (blocks of memory
+	that the kernel uses for allocation, usually 4 KB in size).
+	If the last page allocated has room for more bytes
+	than requested, the rest of the page will be used,
+	making the actual allocation bigger than requested.
+	( Note, the size may not be a multiple of the page size
+	  due to buffer managment overhead. )
+
+	This can only be updated when the current_tracer
+	is set to "nop".
+
+  tracing_cpumask:
+
+	This is a mask that lets the user only trace
+	on specified CPUS. The format is a hex string
+	representing the CPUS.
+
+  set_ftrace_filter:
+
+	When dynamic ftrace is configured in (see the
+	section below "dynamic ftrace"), the code is dynamically
+	modified (code text rewrite) to disable calling of the
+	function profiler (mcount). This lets tracing be configured
+	in with practically no overhead in performance.  This also
+	has a side effect of enabling or disabling specific functions
+	to be traced. Echoing names of functions into this file
+	will limit the trace to only those functions.
+
+  set_ftrace_notrace:
+
+	This has an effect opposite to that of
+	set_ftrace_filter. Any function that is added here will not
+	be traced. If a function exists in both set_ftrace_filter
+	and set_ftrace_notrace,	the function will _not_ be traced.
+
+  set_ftrace_pid:
+
+	Have the function tracer only trace a single thread.
+
+  set_graph_function:
+
+	Set a "trigger" function where tracing should start
+	with the function graph tracer (See the section
+	"dynamic ftrace" for more details).
+
+  available_filter_functions:
+
+	This lists the functions that ftrace
+	has processed and can trace. These are the function
+	names that you can pass to "set_ftrace_filter" or
+	"set_ftrace_notrace". (See the section "dynamic ftrace"
+	below for more details.)
 
 
 The Tracers
@@ -141,36 +175,66 @@ The Tracers
 
 Here is the list of current tracers that may be configured.
 
-  function - function tracer that uses mcount to trace all functions.
+  "function"
+
+	Function call tracer to trace all kernel functions.
+
+  "function_graph_tracer"
+
+	Similar to the function tracer except that the
+	function tracer probes the functions on their entry
+	whereas the function graph tracer traces on both entry
+	and exit of the functions. It then provides the ability
+	to draw a graph of function calls similar to C code
+	source.
 
-  sched_switch - traces the context switches between tasks.
+  "sched_switch"
 
-  irqsoff - traces the areas that disable interrupts and saves
-  		the trace with the longest max latency.
-		See tracing_max_latency.  When a new max is recorded,
-		it replaces the old trace. It is best to view this
-		trace via the latency_trace file.
+	Traces the context switches and wakeups between tasks.
 
-  preemptoff - Similar to irqsoff but traces and records the amount of
-		time for which preemption is disabled.
+  "irqsoff"
 
-  preemptirqsoff - Similar to irqsoff and preemptoff, but traces and
-		 records the largest time for which irqs and/or preemption
-		 is disabled.
+	Traces the areas that disable interrupts and saves
+	the trace with the longest max latency.
+	See tracing_max_latency. When a new max is recorded,
+	it replaces the old trace. It is best to view this
+	trace via the latency_trace file.
 
-  wakeup - Traces and records the max latency that it takes for
-		the highest priority task to get scheduled after
-		it has been woken up.
+  "preemptoff"
 
-  nop - This is not a tracer. To remove all tracers from tracing
-		simply echo "nop" into current_tracer.
+	Similar to irqsoff but traces and records the amount of
+	time for which preemption is disabled.
+
+  "preemptirqsoff"
+
+	Similar to irqsoff and preemptoff, but traces and
+	records the largest time for which irqs and/or preemption
+	is disabled.
+
+  "wakeup"
+
+	Traces and records the max latency that it takes for
+	the highest priority task to get scheduled after
+	it has been woken up.
+
+  "hw-branch-tracer"
+
+	Uses the BTS CPU feature on x86 CPUs to traces all
+	branches executed.
+
+  "nop"
+
+	This is the "trace nothing" tracer. To remove all
+	tracers from tracing simply echo "nop" into
+	current_tracer.
 
 
 Examples of using the tracer
 ----------------------------
 
-Here are typical examples of using the tracers when controlling them only
-with the debugfs interface (without using any user-land utilities).
+Here are typical examples of using the tracers when controlling
+them only with the debugfs interface (without using any
+user-land utilities).
 
 Output format:
 --------------
@@ -187,16 +251,16 @@ Here is an example of the output format of the file "trace"
             bash-4251  [01] 10152.583855: _atomic_dec_and_lock <-dput
                              --------
 
-A header is printed with the tracer name that is represented by the trace.
-In this case the tracer is "function". Then a header showing the format. Task
-name "bash", the task PID "4251", the CPU that it was running on
-"01", the timestamp in <secs>.<usecs> format, the function name that was
-traced "path_put" and the parent function that called this function
-"path_walk". The timestamp is the time at which the function was
-entered.
+A header is printed with the tracer name that is represented by
+the trace. In this case the tracer is "function". Then a header
+showing the format. Task name "bash", the task PID "4251", the
+CPU that it was running on "01", the timestamp in <secs>.<usecs>
+format, the function name that was traced "path_put" and the
+parent function that called this function "path_walk". The
+timestamp is the time at which the function was entered.
 
-The sched_switch tracer also includes tracing of task wakeups and
-context switches.
+The sched_switch tracer also includes tracing of task wakeups
+and context switches.
 
      ksoftirqd/1-7     [01]  1453.070013:      7:115:R   +  2916:115:S
      ksoftirqd/1-7     [01]  1453.070013:      7:115:R   +    10:115:S
@@ -205,8 +269,8 @@ context switches.
      kondemand/1-2916  [01]  1453.070013:   2916:115:S ==>     7:115:R
      ksoftirqd/1-7     [01]  1453.070013:      7:115:S ==>     0:140:R
 
-Wake ups are represented by a "+" and the context switches are shown as
-"==>".  The format is:
+Wake ups are represented by a "+" and the context switches are
+shown as "==>".  The format is:
 
  Context switches:
 
@@ -220,19 +284,20 @@ Wake ups are represented by a "+" and the context switches are shown as
 
   <pid>:<prio>:<state>    +  <pid>:<prio>:<state>
 
-The prio is the internal kernel priority, which is the inverse of the
-priority that is usually displayed by user-space tools. Zero represents
-the highest priority (99). Prio 100 starts the "nice" priorities with
-100 being equal to nice -20 and 139 being nice 19. The prio "140" is
-reserved for the idle task which is the lowest priority thread (pid 0).
+The prio is the internal kernel priority, which is the inverse
+of the priority that is usually displayed by user-space tools.
+Zero represents the highest priority (99). Prio 100 starts the
+"nice" priorities with 100 being equal to nice -20 and 139 being
+nice 19. The prio "140" is reserved for the idle task which is
+the lowest priority thread (pid 0).
 
 
 Latency trace format
 --------------------
 
-For traces that display latency times, the latency_trace file gives
-somewhat more information to see why a latency happened. Here is a typical
-trace.
+For traces that display latency times, the latency_trace file
+gives somewhat more information to see why a latency happened.
+Here is a typical trace.
 
 # tracer: irqsoff
 #
@@ -259,20 +324,20 @@ irqsoff latency trace v1.1.5 on 2.6.26-rc8
   <idle>-0     0d.s1   98us : trace_hardirqs_on (do_softirq)
 
 
+This shows that the current tracer is "irqsoff" tracing the time
+for which interrupts were disabled. It gives the trace version
+and the version of the kernel upon which this was executed on
+(2.6.26-rc8). Then it displays the max latency in microsecs (97
+us). The number of trace entries displayed and the total number
+recorded (both are three: #3/3). The type of preemption that was
+used (PREEMPT). VP, KP, SP, and HP are always zero and are
+reserved for later use. #P is the number of online CPUS (#P:2).
 
-This shows that the current tracer is "irqsoff" tracing the time for which
-interrupts were disabled. It gives the trace version and the version
-of the kernel upon which this was executed on (2.6.26-rc8). Then it displays
-the max latency in microsecs (97 us). The number of trace entries displayed
-and the total number recorded (both are three: #3/3). The type of
-preemption that was used (PREEMPT). VP, KP, SP, and HP are always zero
-and are reserved for later use. #P is the number of online CPUS (#P:2).
-
-The task is the process that was running when the latency occurred.
-(swapper pid: 0).
+The task is the process that was running when the latency
+occurred. (swapper pid: 0).
 
-The start and stop (the functions in which the interrupts were disabled and
-enabled respectively) that caused the latencies:
+The start and stop (the functions in which the interrupts were
+disabled and enabled respectively) that caused the latencies:
 
   apic_timer_interrupt is where the interrupts were disabled.
   do_softirq is where they were enabled again.
@@ -308,12 +373,12 @@ The above is mostly meaningful for kernel developers.
 	latency_trace file is relative to the start of the trace.
 
   delay: This is just to help catch your eye a bit better. And
-	needs to be fixed to be only relative to the same CPU.
-	The marks are determined by the difference between this
-	current trace and the next trace.
-	 '!' - greater than preempt_mark_thresh (default 100)
-	 '+' - greater than 1 microsecond
-	 ' ' - less than or equal to 1 microsecond.
+	 needs to be fixed to be only relative to the same CPU.
+	 The marks are determined by the difference between this
+	 current trace and the next trace.
+	  '!' - greater than preempt_mark_thresh (default 100)
+	  '+' - greater than 1 microsecond
+	  ' ' - less than or equal to 1 microsecond.
 
   The rest is the same as the 'trace' file.
 
@@ -321,14 +386,15 @@ The above is mostly meaningful for kernel developers.
 trace_options
 -------------
 
-The trace_options file is used to control what gets printed in the trace
-output. To see what is available, simply cat the file:
+The trace_options file is used to control what gets printed in
+the trace output. To see what is available, simply cat the file:
 
   cat /debug/tracing/trace_options
   print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \
- noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj
+  noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj
 
-To disable one of the options, echo in the option prepended with "no".
+To disable one of the options, echo in the option prepended with
+"no".
 
   echo noprint-parent > /debug/tracing/trace_options
 
@@ -338,8 +404,8 @@ To enable an option, leave off the "no".
 
 Here are the available options:
 
-  print-parent - On function traces, display the calling function
-		as well as the function being traced.
+  print-parent - On function traces, display the calling (parent)
+		 function as well as the function being traced.
 
   print-parent:
    bash-4000  [01]  1477.606694: simple_strtoul <-strict_strtoul
@@ -348,15 +414,16 @@ Here are the available options:
    bash-4000  [01]  1477.606694: simple_strtoul
 
 
-  sym-offset - Display not only the function name, but also the offset
-		in the function. For example, instead of seeing just
-		"ktime_get", you will see "ktime_get+0xb/0x20".
+  sym-offset - Display not only the function name, but also the
+	       offset in the function. For example, instead of
+	       seeing just "ktime_get", you will see
+	       "ktime_get+0xb/0x20".
 
   sym-offset:
    bash-4000  [01]  1477.606694: simple_strtoul+0x6/0xa0
 
-  sym-addr - this will also display the function address as well as
-		the function name.
+  sym-addr - this will also display the function address as well
+	     as the function name.
 
   sym-addr:
    bash-4000  [01]  1477.606694: simple_strtoul <c0339346>
@@ -366,35 +433,41 @@ Here are the available options:
     bash  4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \
     (+0.000ms): simple_strtoul (strict_strtoul)
 
-  raw - This will display raw numbers. This option is best for use with
-	user applications that can translate the raw numbers better than
-	having it done in the kernel.
+  raw - This will display raw numbers. This option is best for
+	use with user applications that can translate the raw
+	numbers better than having it done in the kernel.
 
-  hex - Similar to raw, but the numbers will be in a hexadecimal format.
+  hex - Similar to raw, but the numbers will be in a hexadecimal
+	format.
 
   bin - This will print out the formats in raw binary.
 
   block - TBD (needs update)
 
-  stacktrace - This is one of the options that changes the trace itself.
-		When a trace is recorded, so is the stack of functions.
-		This allows for back traces of trace sites.
+  stacktrace - This is one of the options that changes the trace
+	       itself. When a trace is recorded, so is the stack
+	       of functions. This allows for back traces of
+	       trace sites.
 
-  userstacktrace - This option changes the trace.
-		   It records a stacktrace of the current userspace thread.
+  userstacktrace - This option changes the trace. It records a
+		   stacktrace of the current userspace thread.
 
-  sym-userobj - when user stacktrace are enabled, look up which object the
-		address belongs to, and print a relative address
-		This is especially useful when ASLR is on, otherwise you don't
-		get a chance to resolve the address to object/file/line after the app is no
-		longer running
+  sym-userobj - when user stacktrace are enabled, look up which
+		object the address belongs to, and print a
+		relative address. This is especially useful when
+		ASLR is on, otherwise you don't get a chance to
+		resolve the address to object/file/line after
+		the app is no longer running
 
-		The lookup is performed when you read trace,trace_pipe,latency_trace. Example:
+		The lookup is performed when you read
+		trace,trace_pipe,latency_trace. Example:
 
 		a.out-1623  [000] 40874.465068: /root/a.out[+0x480] <-/root/a.out[+0
 x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6]
 
-  sched-tree - TBD (any users??)
+  sched-tree - trace all tasks that are on the runqueue, at
+	       every scheduling event. Will add overhead if
+	       there's a lot of tasks running at once.
 
 
 sched_switch
@@ -431,18 +504,19 @@ of how to use it.
  [...]
 
 
-As we have discussed previously about this format, the header shows
-the name of the trace and points to the options. The "FUNCTION"
-is a misnomer since here it represents the wake ups and context
-switches.
+As we have discussed previously about this format, the header
+shows the name of the trace and points to the options. The
+"FUNCTION" is a misnomer since here it represents the wake ups
+and context switches.
 
-The sched_switch file only lists the wake ups (represented with '+')
-and context switches ('==>') with the previous task or current task
-first followed by the next task or task waking up. The format for both
-of these is PID:KERNEL-PRIO:TASK-STATE. Remember that the KERNEL-PRIO
-is the inverse of the actual priority with zero (0) being the highest
-priority and the nice values starting at 100 (nice -20). Below is
-a quick chart to map the kernel priority to user land priorities.
+The sched_switch file only lists the wake ups (represented with
+'+') and context switches ('==>') with the previous task or
+current task first followed by the next task or task waking up.
+The format for both of these is PID:KERNEL-PRIO:TASK-STATE.
+Remember that the KERNEL-PRIO is the inverse of the actual
+priority with zero (0) being the highest priority and the nice
+values starting at 100 (nice -20). Below is a quick chart to map
+the kernel priority to user land priorities.
 
   Kernel priority: 0 to 99    ==> user RT priority 99 to 0
   Kernel priority: 100 to 139 ==> user nice -20 to 19
@@ -463,10 +537,10 @@ The task states are:
 ftrace_enabled
 --------------
 
-The following tracers (listed below) give different output depending
-on whether or not the sysctl ftrace_enabled is set. To set ftrace_enabled,
-one can either use the sysctl function or set it via the proc
-file system interface.
+The following tracers (listed below) give different output
+depending on whether or not the sysctl ftrace_enabled is set. To
+set ftrace_enabled, one can either use the sysctl function or
+set it via the proc file system interface.
 
   sysctl kernel.ftrace_enabled=1
 
@@ -474,12 +548,12 @@ file system interface.
 
   echo 1 > /proc/sys/kernel/ftrace_enabled
 
-To disable ftrace_enabled simply replace the '1' with '0' in
-the above commands.
+To disable ftrace_enabled simply replace the '1' with '0' in the
+above commands.
 
-When ftrace_enabled is set the tracers will also record the functions
-that are within the trace. The descriptions of the tracers
-will also show an example with ftrace enabled.
+When ftrace_enabled is set the tracers will also record the
+functions that are within the trace. The descriptions of the
+tracers will also show an example with ftrace enabled.
 
 
 irqsoff
@@ -487,17 +561,18 @@ irqsoff
 
 When interrupts are disabled, the CPU can not react to any other
 external event (besides NMIs and SMIs). This prevents the timer
-interrupt from triggering or the mouse interrupt from letting the
-kernel know of a new mouse event. The result is a latency with the
-reaction time.
+interrupt from triggering or the mouse interrupt from letting
+the kernel know of a new mouse event. The result is a latency
+with the reaction time.
 
-The irqsoff tracer tracks the time for which interrupts are disabled.
-When a new maximum latency is hit, the tracer saves the trace leading up
-to that latency point so that every time a new maximum is reached, the old
-saved trace is discarded and the new trace is saved.
+The irqsoff tracer tracks the time for which interrupts are
+disabled. When a new maximum latency is hit, the tracer saves
+the trace leading up to that latency point so that every time a
+new maximum is reached, the old saved trace is discarded and the
+new trace is saved.
 
-To reset the maximum, echo 0 into tracing_max_latency. Here is an
-example:
+To reset the maximum, echo 0 into tracing_max_latency. Here is
+an example:
 
  # echo irqsoff > /debug/tracing/current_tracer
  # echo 0 > /debug/tracing/tracing_max_latency
@@ -532,10 +607,11 @@ irqsoff latency trace v1.1.5 on 2.6.26
 
 
 Here we see that that we had a latency of 12 microsecs (which is
-very good). The _write_lock_irq in sys_setpgid disabled interrupts.
-The difference between the 12 and the displayed timestamp 14us occurred
-because the clock was incremented between the time of recording the max
-latency and the time of recording the function that had that latency.
+very good). The _write_lock_irq in sys_setpgid disabled
+interrupts. The difference between the 12 and the displayed
+timestamp 14us occurred because the clock was incremented
+between the time of recording the max latency and the time of
+recording the function that had that latency.
 
 Note the above example had ftrace_enabled not set. If we set the
 ftrace_enabled, we get a much larger output:
@@ -586,24 +662,24 @@ irqsoff latency trace v1.1.5 on 2.6.26-rc8
 
 
 Here we traced a 50 microsecond latency. But we also see all the
-functions that were called during that time. Note that by enabling
-function tracing, we incur an added overhead. This overhead may
-extend the latency times. But nevertheless, this trace has provided
-some very helpful debugging information.
+functions that were called during that time. Note that by
+enabling function tracing, we incur an added overhead. This
+overhead may extend the latency times. But nevertheless, this
+trace has provided some very helpful debugging information.
 
 
 preemptoff
 ----------
 
-When preemption is disabled, we may be able to receive interrupts but
-the task cannot be preempted and a higher priority task must wait
-for preemption to be enabled again before it can preempt a lower
-priority task.
+When preemption is disabled, we may be able to receive
+interrupts but the task cannot be preempted and a higher
+priority task must wait for preemption to be enabled again
+before it can preempt a lower priority task.
 
 The preemptoff tracer traces the places that disable preemption.
-Like the irqsoff tracer, it records the maximum latency for which preemption
-was disabled. The control of preemptoff tracer is much like the irqsoff
-tracer.
+Like the irqsoff tracer, it records the maximum latency for
+which preemption was disabled. The control of preemptoff tracer
+is much like the irqsoff tracer.
 
  # echo preemptoff > /debug/tracing/current_tracer
  # echo 0 > /debug/tracing/tracing_max_latency
@@ -637,11 +713,12 @@ preemptoff latency trace v1.1.5 on 2.6.26-rc8
     sshd-4261  0d.s1   30us : trace_preempt_on (__do_softirq)
 
 
-This has some more changes. Preemption was disabled when an interrupt
-came in (notice the 'h'), and was enabled while doing a softirq.
-(notice the 's'). But we also see that interrupts have been disabled
-when entering the preempt off section and leaving it (the 'd').
-We do not know if interrupts were enabled in the mean time.
+This has some more changes. Preemption was disabled when an
+interrupt came in (notice the 'h'), and was enabled while doing
+a softirq. (notice the 's'). But we also see that interrupts
+have been disabled when entering the preempt off section and
+leaving it (the 'd'). We do not know if interrupts were enabled
+in the mean time.
 
 # tracer: preemptoff
 #
@@ -700,28 +777,30 @@ preemptoff latency trace v1.1.5 on 2.6.26-rc8
     sshd-4261  0d.s1   64us : trace_preempt_on (__do_softirq)
 
 
-The above is an example of the preemptoff trace with ftrace_enabled
-set. Here we see that interrupts were disabled the entire time.
-The irq_enter code lets us know that we entered an interrupt 'h'.
-Before that, the functions being traced still show that it is not
-in an interrupt, but we can see from the functions themselves that
-this is not the case.
+The above is an example of the preemptoff trace with
+ftrace_enabled set. Here we see that interrupts were disabled
+the entire time. The irq_enter code lets us know that we entered
+an interrupt 'h'. Before that, the functions being traced still
+show that it is not in an interrupt, but we can see from the
+functions themselves that this is not the case.
 
-Notice that __do_softirq when called does not have a preempt_count.
-It may seem that we missed a preempt enabling. What really happened
-is that the preempt count is held on the thread's stack and we
-switched to the softirq stack (4K stacks in effect). The code
-does not copy the preempt count, but because interrupts are disabled,
-we do not need to worry about it. Having a tracer like this is good
-for letting people know what really happens inside the kernel.
+Notice that __do_softirq when called does not have a
+preempt_count. It may seem that we missed a preempt enabling.
+What really happened is that the preempt count is held on the
+thread's stack and we switched to the softirq stack (4K stacks
+in effect). The code does not copy the preempt count, but
+because interrupts are disabled, we do not need to worry about
+it. Having a tracer like this is good for letting people know
+what really happens inside the kernel.
 
 
 preemptirqsoff
 --------------
 
-Knowing the locations that have interrupts disabled or preemption
-disabled for the longest times is helpful. But sometimes we would
-like to know when either preemption and/or interrupts are disabled.
+Knowing the locations that have interrupts disabled or
+preemption disabled for the longest times is helpful. But
+sometimes we would like to know when either preemption and/or
+interrupts are disabled.
 
 Consider the following code:
 
@@ -741,11 +820,13 @@ The preemptoff tracer will record the total length of
 call_function_with_irqs_and_preemption_off() and
 call_function_with_preemption_off().
 
-But neither will trace the time that interrupts and/or preemption
-is disabled. This total time is the time that we can not schedule.
-To record this time, use the preemptirqsoff tracer.
+But neither will trace the time that interrupts and/or
+preemption is disabled. This total time is the time that we can
+not schedule. To record this time, use the preemptirqsoff
+tracer.
 
-Again, using this trace is much like the irqsoff and preemptoff tracers.
+Again, using this trace is much like the irqsoff and preemptoff
+tracers.
 
  # echo preemptirqsoff > /debug/tracing/current_tracer
  # echo 0 > /debug/tracing/tracing_max_latency
@@ -781,9 +862,10 @@ preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
 
 
 The trace_hardirqs_off_thunk is called from assembly on x86 when
-interrupts are disabled in the assembly code. Without the function
-tracing, we do not know if interrupts were enabled within the preemption
-points. We do see that it started with preemption enabled.
+interrupts are disabled in the assembly code. Without the
+function tracing, we do not know if interrupts were enabled
+within the preemption points. We do see that it started with
+preemption enabled.
 
 Here is a trace with ftrace_enabled set:
 
@@ -871,40 +953,42 @@ preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
     sshd-4261  0d.s1  105us : trace_preempt_on (__do_softirq)
 
 
-This is a very interesting trace. It started with the preemption of
-the ls task. We see that the task had the "need_resched" bit set
-via the 'N' in the trace.  Interrupts were disabled before the spin_lock
-at the beginning of the trace. We see that a schedule took place to run
-sshd.  When the interrupts were enabled, we took an interrupt.
-On return from the interrupt handler, the softirq ran. We took another
-interrupt while running the softirq as we see from the capital 'H'.
+This is a very interesting trace. It started with the preemption
+of the ls task. We see that the task had the "need_resched" bit
+set via the 'N' in the trace.  Interrupts were disabled before
+the spin_lock at the beginning of the trace. We see that a
+schedule took place to run sshd.  When the interrupts were
+enabled, we took an interrupt. On return from the interrupt
+handler, the softirq ran. We took another interrupt while
+running the softirq as we see from the capital 'H'.
 
 
 wakeup
 ------
 
-In a Real-Time environment it is very important to know the wakeup
-time it takes for the highest priority task that is woken up to the
-time that it executes. This is also known as "schedule latency".
-I stress the point that this is about RT tasks. It is also important
-to know the scheduling latency of non-RT tasks, but the average
-schedule latency is better for non-RT tasks. Tools like
-LatencyTop are more appropriate for such measurements.
+In a Real-Time environment it is very important to know the
+wakeup time it takes for the highest priority task that is woken
+up to the time that it executes. This is also known as "schedule
+latency". I stress the point that this is about RT tasks. It is
+also important to know the scheduling latency of non-RT tasks,
+but the average schedule latency is better for non-RT tasks.
+Tools like LatencyTop are more appropriate for such
+measurements.
 
 Real-Time environments are interested in the worst case latency.
-That is the longest latency it takes for something to happen, and
-not the average. We can have a very fast scheduler that may only
-have a large latency once in a while, but that would not work well
-with Real-Time tasks.  The wakeup tracer was designed to record
-the worst case wakeups of RT tasks. Non-RT tasks are not recorded
-because the tracer only records one worst case and tracing non-RT
-tasks that are unpredictable will overwrite the worst case latency
-of RT tasks.
-
-Since this tracer only deals with RT tasks, we will run this slightly
-differently than we did with the previous tracers. Instead of performing
-an 'ls', we will run 'sleep 1' under 'chrt' which changes the
-priority of the task.
+That is the longest latency it takes for something to happen,
+and not the average. We can have a very fast scheduler that may
+only have a large latency once in a while, but that would not
+work well with Real-Time tasks.  The wakeup tracer was designed
+to record the worst case wakeups of RT tasks. Non-RT tasks are
+not recorded because the tracer only records one worst case and
+tracing non-RT tasks that are unpredictable will overwrite the
+worst case latency of RT tasks.
+
+Since this tracer only deals with RT tasks, we will run this
+slightly differently than we did with the previous tracers.
+Instead of performing an 'ls', we will run 'sleep 1' under
+'chrt' which changes the priority of the task.
 
  # echo wakeup > /debug/tracing/current_tracer
  # echo 0 > /debug/tracing/tracing_max_latency
@@ -934,17 +1018,16 @@ wakeup latency trace v1.1.5 on 2.6.26-rc8
   <idle>-0     1d..4    4us : schedule (cpu_idle)
 
 
+Running this on an idle system, we see that it only took 4
+microseconds to perform the task switch.  Note, since the trace
+marker in the schedule is before the actual "switch", we stop
+the tracing when the recorded task is about to schedule in. This
+may change if we add a new marker at the end of the scheduler.
 
-Running this on an idle system, we see that it only took 4 microseconds
-to perform the task switch.  Note, since the trace marker in the
-schedule is before the actual "switch", we stop the tracing when
-the recorded task is about to schedule in. This may change if
-we add a new marker at the end of the scheduler.
-
-Notice that the recorded task is 'sleep' with the PID of 4901 and it
-has an rt_prio of 5. This priority is user-space priority and not
-the internal kernel priority. The policy is 1 for SCHED_FIFO and 2
-for SCHED_RR.
+Notice that the recorded task is 'sleep' with the PID of 4901
+and it has an rt_prio of 5. This priority is user-space priority
+and not the internal kernel priority. The policy is 1 for
+SCHED_FIFO and 2 for SCHED_RR.
 
 Doing the same with chrt -r 5 and ftrace_enabled set.
 
@@ -1001,24 +1084,25 @@ ksoftirq-7     1d..6   49us : _spin_unlock (tracing_record_cmdline)
 ksoftirq-7     1d..6   49us : sub_preempt_count (_spin_unlock)
 ksoftirq-7     1d..4   50us : schedule (__cond_resched)
 
-The interrupt went off while running ksoftirqd. This task runs at
-SCHED_OTHER. Why did not we see the 'N' set early? This may be
-a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K stacks
-configured, the interrupt and softirq run with their own stack.
-Some information is held on the top of the task's stack (need_resched
-and preempt_count are both stored there). The setting of the NEED_RESCHED
-bit is done directly to the task's stack, but the reading of the
-NEED_RESCHED is done by looking at the current stack, which in this case
-is the stack for the hard interrupt. This hides the fact that NEED_RESCHED
-has been set. We do not see the 'N' until we switch back to the task's
+The interrupt went off while running ksoftirqd. This task runs
+at SCHED_OTHER. Why did not we see the 'N' set early? This may
+be a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K
+stacks configured, the interrupt and softirq run with their own
+stack. Some information is held on the top of the task's stack
+(need_resched and preempt_count are both stored there). The
+setting of the NEED_RESCHED bit is done directly to the task's
+stack, but the reading of the NEED_RESCHED is done by looking at
+the current stack, which in this case is the stack for the hard
+interrupt. This hides the fact that NEED_RESCHED has been set.
+We do not see the 'N' until we switch back to the task's
 assigned stack.
 
 function
 --------
 
 This tracer is the function tracer. Enabling the function tracer
-can be done from the debug file system. Make sure the ftrace_enabled is
-set; otherwise this tracer is a nop.
+can be done from the debug file system. Make sure the
+ftrace_enabled is set; otherwise this tracer is a nop.
 
  # sysctl kernel.ftrace_enabled=1
  # echo function > /debug/tracing/current_tracer
@@ -1048,14 +1132,15 @@ set; otherwise this tracer is a nop.
 [...]
 
 
-Note: function tracer uses ring buffers to store the above entries.
-The newest data may overwrite the oldest data. Sometimes using echo to
-stop the trace is not sufficient because the tracing could have overwritten
-the data that you wanted to record. For this reason, it is sometimes better to
-disable tracing directly from a program. This allows you to stop the
-tracing at the point that you hit the part that you are interested in.
-To disable the tracing directly from a C program, something like following
-code snippet can be used:
+Note: function tracer uses ring buffers to store the above
+entries. The newest data may overwrite the oldest data.
+Sometimes using echo to stop the trace is not sufficient because
+the tracing could have overwritten the data that you wanted to
+record. For this reason, it is sometimes better to disable
+tracing directly from a program. This allows you to stop the
+tracing at the point that you hit the part that you are
+interested in. To disable the tracing directly from a C program,
+something like following code snippet can be used:
 
 int trace_fd;
 [...]
@@ -1070,10 +1155,10 @@ int main(int argc, char *argv[]) {
 }
 
 Note: Here we hard coded the path name. The debugfs mount is not
-guaranteed to be at /debug (and is more commonly at /sys/kernel/debug).
-For simple one time traces, the above is sufficent. For anything else,
-a search through /proc/mounts may be needed to find where the debugfs
-file-system is mounted.
+guaranteed to be at /debug (and is more commonly at
+/sys/kernel/debug). For simple one time traces, the above is
+sufficent. For anything else, a search through /proc/mounts may
+be needed to find where the debugfs file-system is mounted.
 
 
 Single thread tracing
@@ -1152,49 +1237,297 @@ int main (int argc, char **argv)
         return 0;
 }
 
+
+hw-branch-tracer (x86 only)
+---------------------------
+
+This tracer uses the x86 last branch tracing hardware feature to
+collect a branch trace on all cpus with relatively low overhead.
+
+The tracer uses a fixed-size circular buffer per cpu and only
+traces ring 0 branches. The trace file dumps that buffer in the
+following format:
+
+# tracer: hw-branch-tracer
+#
+# CPU#        TO  <-  FROM
+   0  scheduler_tick+0xb5/0x1bf	  <-  task_tick_idle+0x5/0x6
+   2  run_posix_cpu_timers+0x2b/0x72a	  <-  run_posix_cpu_timers+0x25/0x72a
+   0  scheduler_tick+0x139/0x1bf	  <-  scheduler_tick+0xed/0x1bf
+   0  scheduler_tick+0x17c/0x1bf	  <-  scheduler_tick+0x148/0x1bf
+   2  run_posix_cpu_timers+0x9e/0x72a	  <-  run_posix_cpu_timers+0x5e/0x72a
+   0  scheduler_tick+0x1b6/0x1bf	  <-  scheduler_tick+0x1aa/0x1bf
+
+
+The tracer may be used to dump the trace for the oops'ing cpu on
+a kernel oops into the system log. To enable this,
+ftrace_dump_on_oops must be set. To set ftrace_dump_on_oops, one
+can either use the sysctl function or set it via the proc system
+interface.
+
+  sysctl kernel.ftrace_dump_on_oops=1
+
+or
+
+  echo 1 > /proc/sys/kernel/ftrace_dump_on_oops
+
+
+Here's an example of such a dump after a null pointer
+dereference in a kernel module:
+
+[57848.105921] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
+[57848.106019] IP: [<ffffffffa0000006>] open+0x6/0x14 [oops]
+[57848.106019] PGD 2354e9067 PUD 2375e7067 PMD 0
+[57848.106019] Oops: 0002 [#1] SMP
+[57848.106019] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:20:05.0/local_cpus
+[57848.106019] Dumping ftrace buffer:
+[57848.106019] ---------------------------------
+[...]
+[57848.106019]    0  chrdev_open+0xe6/0x165	  <-  cdev_put+0x23/0x24
+[57848.106019]    0  chrdev_open+0x117/0x165	  <-  chrdev_open+0xfa/0x165
+[57848.106019]    0  chrdev_open+0x120/0x165	  <-  chrdev_open+0x11c/0x165
+[57848.106019]    0  chrdev_open+0x134/0x165	  <-  chrdev_open+0x12b/0x165
+[57848.106019]    0  open+0x0/0x14 [oops]	  <-  chrdev_open+0x144/0x165
+[57848.106019]    0  page_fault+0x0/0x30	  <-  open+0x6/0x14 [oops]
+[57848.106019]    0  error_entry+0x0/0x5b	  <-  page_fault+0x4/0x30
+[57848.106019]    0  error_kernelspace+0x0/0x31	  <-  error_entry+0x59/0x5b
+[57848.106019]    0  error_sti+0x0/0x1	  <-  error_kernelspace+0x2d/0x31
+[57848.106019]    0  page_fault+0x9/0x30	  <-  error_sti+0x0/0x1
+[57848.106019]    0  do_page_fault+0x0/0x881	  <-  page_fault+0x1a/0x30
+[...]
+[57848.106019]    0  do_page_fault+0x66b/0x881	  <-  is_prefetch+0x1ee/0x1f2
+[57848.106019]    0  do_page_fault+0x6e0/0x881	  <-  do_page_fault+0x67a/0x881
+[57848.106019]    0  oops_begin+0x0/0x96	  <-  do_page_fault+0x6e0/0x881
+[57848.106019]    0  trace_hw_branch_oops+0x0/0x2d	  <-  oops_begin+0x9/0x96
+[...]
+[57848.106019]    0  ds_suspend_bts+0x2a/0xe3	  <-  ds_suspend_bts+0x1a/0xe3
+[57848.106019] ---------------------------------
+[57848.106019] CPU 0
+[57848.106019] Modules linked in: oops
+[57848.106019] Pid: 5542, comm: cat Tainted: G        W  2.6.28 #23
+[57848.106019] RIP: 0010:[<ffffffffa0000006>]  [<ffffffffa0000006>] open+0x6/0x14 [oops]
+[57848.106019] RSP: 0018:ffff880235457d48  EFLAGS: 00010246
+[...]
+
+
+function graph tracer
+---------------------------
+
+This tracer is similar to the function tracer except that it
+probes a function on its entry and its exit. This is done by
+using a dynamically allocated stack of return addresses in each
+task_struct. On function entry the tracer overwrites the return
+address of each function traced to set a custom probe. Thus the
+original return address is stored on the stack of return address
+in the task_struct.
+
+Probing on both ends of a function leads to special features
+such as:
+
+- measure of a function's time execution
+- having a reliable call stack to draw function calls graph
+
+This tracer is useful in several situations:
+
+- you want to find the reason of a strange kernel behavior and
+  need to see what happens in detail on any areas (or specific
+  ones).
+
+- you are experiencing weird latencies but it's difficult to
+  find its origin.
+
+- you want to find quickly which path is taken by a specific
+  function
+
+- you just want to peek inside a working kernel and want to see
+  what happens there.
+
+# tracer: function_graph
+#
+# CPU  DURATION                  FUNCTION CALLS
+# |     |   |                     |   |   |   |
+
+ 0)               |  sys_open() {
+ 0)               |    do_sys_open() {
+ 0)               |      getname() {
+ 0)               |        kmem_cache_alloc() {
+ 0)   1.382 us    |          __might_sleep();
+ 0)   2.478 us    |        }
+ 0)               |        strncpy_from_user() {
+ 0)               |          might_fault() {
+ 0)   1.389 us    |            __might_sleep();
+ 0)   2.553 us    |          }
+ 0)   3.807 us    |        }
+ 0)   7.876 us    |      }
+ 0)               |      alloc_fd() {
+ 0)   0.668 us    |        _spin_lock();
+ 0)   0.570 us    |        expand_files();
+ 0)   0.586 us    |        _spin_unlock();
+
+
+There are several columns that can be dynamically
+enabled/disabled. You can use every combination of options you
+want, depending on your needs.
+
+- The cpu number on which the function executed is default
+  enabled.  It is sometimes better to only trace one cpu (see
+  tracing_cpu_mask file) or you might sometimes see unordered
+  function calls while cpu tracing switch.
+
+	hide: echo nofuncgraph-cpu > /debug/tracing/trace_options
+	show: echo funcgraph-cpu > /debug/tracing/trace_options
+
+- The duration (function's time of execution) is displayed on
+  the closing bracket line of a function or on the same line
+  than the current function in case of a leaf one. It is default
+  enabled.
+
+	hide: echo nofuncgraph-duration > /debug/tracing/trace_options
+	show: echo funcgraph-duration > /debug/tracing/trace_options
+
+- The overhead field precedes the duration field in case of
+  reached duration thresholds.
+
+	hide: echo nofuncgraph-overhead > /debug/tracing/trace_options
+	show: echo funcgraph-overhead > /debug/tracing/trace_options
+	depends on: funcgraph-duration
+
+  ie:
+
+  0)               |    up_write() {
+  0)   0.646 us    |      _spin_lock_irqsave();
+  0)   0.684 us    |      _spin_unlock_irqrestore();
+  0)   3.123 us    |    }
+  0)   0.548 us    |    fput();
+  0) + 58.628 us   |  }
+
+  [...]
+
+  0)               |      putname() {
+  0)               |        kmem_cache_free() {
+  0)   0.518 us    |          __phys_addr();
+  0)   1.757 us    |        }
+  0)   2.861 us    |      }
+  0) ! 115.305 us  |    }
+  0) ! 116.402 us  |  }
+
+  + means that the function exceeded 10 usecs.
+  ! means that the function exceeded 100 usecs.
+
+
+- The task/pid field displays the thread cmdline and pid which
+  executed the function. It is default disabled.
+
+	hide: echo nofuncgraph-proc > /debug/tracing/trace_options
+	show: echo funcgraph-proc > /debug/tracing/trace_options
+
+  ie:
+
+  # tracer: function_graph
+  #
+  # CPU  TASK/PID        DURATION                  FUNCTION CALLS
+  # |    |    |           |   |                     |   |   |   |
+  0)    sh-4802     |               |                  d_free() {
+  0)    sh-4802     |               |                    call_rcu() {
+  0)    sh-4802     |               |                      __call_rcu() {
+  0)    sh-4802     |   0.616 us    |                        rcu_process_gp_end();
+  0)    sh-4802     |   0.586 us    |                        check_for_new_grace_period();
+  0)    sh-4802     |   2.899 us    |                      }
+  0)    sh-4802     |   4.040 us    |                    }
+  0)    sh-4802     |   5.151 us    |                  }
+  0)    sh-4802     | + 49.370 us   |                }
+
+
+- The absolute time field is an absolute timestamp given by the
+  system clock since it started. A snapshot of this time is
+  given on each entry/exit of functions
+
+	hide: echo nofuncgraph-abstime > /debug/tracing/trace_options
+	show: echo funcgraph-abstime > /debug/tracing/trace_options
+
+  ie:
+
+  #
+  #      TIME       CPU  DURATION                  FUNCTION CALLS
+  #       |         |     |   |                     |   |   |   |
+  360.774522 |   1)   0.541 us    |                                          }
+  360.774522 |   1)   4.663 us    |                                        }
+  360.774523 |   1)   0.541 us    |                                        __wake_up_bit();
+  360.774524 |   1)   6.796 us    |                                      }
+  360.774524 |   1)   7.952 us    |                                    }
+  360.774525 |   1)   9.063 us    |                                  }
+  360.774525 |   1)   0.615 us    |                                  journal_mark_dirty();
+  360.774527 |   1)   0.578 us    |                                  __brelse();
+  360.774528 |   1)               |                                  reiserfs_prepare_for_journal() {
+  360.774528 |   1)               |                                    unlock_buffer() {
+  360.774529 |   1)               |                                      wake_up_bit() {
+  360.774529 |   1)               |                                        bit_waitqueue() {
+  360.774530 |   1)   0.594 us    |                                          __phys_addr();
+
+
+You can put some comments on specific functions by using
+trace_printk() For example, if you want to put a comment inside
+the __might_sleep() function, you just have to include
+<linux/ftrace.h> and call trace_printk() inside __might_sleep()
+
+trace_printk("I'm a comment!\n")
+
+will produce:
+
+ 1)               |             __might_sleep() {
+ 1)               |                /* I'm a comment! */
+ 1)   1.449 us    |             }
+
+
+You might find other useful features for this tracer in the
+following "dynamic ftrace" section such as tracing only specific
+functions or tasks.
+
 dynamic ftrace
 --------------
 
 If CONFIG_DYNAMIC_FTRACE is set, the system will run with
 virtually no overhead when function tracing is disabled. The way
 this works is the mcount function call (placed at the start of
-every kernel function, produced by the -pg switch in gcc), starts
-of pointing to a simple return. (Enabling FTRACE will include the
--pg switch in the compiling of the kernel.)
+every kernel function, produced by the -pg switch in gcc),
+starts of pointing to a simple return. (Enabling FTRACE will
+include the -pg switch in the compiling of the kernel.)
 
 At compile time every C file object is run through the
 recordmcount.pl script (located in the scripts directory). This
 script will process the C object using objdump to find all the
-locations in the .text section that call mcount. (Note, only
-the .text section is processed, since processing other sections
-like .init.text may cause races due to those sections being freed).
+locations in the .text section that call mcount. (Note, only the
+.text section is processed, since processing other sections like
+.init.text may cause races due to those sections being freed).
 
-A new section called "__mcount_loc" is created that holds references
-to all the mcount call sites in the .text section. This section is
-compiled back into the original object. The final linker will add
-all these references into a single table.
+A new section called "__mcount_loc" is created that holds
+references to all the mcount call sites in the .text section.
+This section is compiled back into the original object. The
+final linker will add all these references into a single table.
 
 On boot up, before SMP is initialized, the dynamic ftrace code
-scans this table and updates all the locations into nops. It also
-records the locations, which are added to the available_filter_functions
-list.  Modules are processed as they are loaded and before they are
-executed.  When a module is unloaded, it also removes its functions from
-the ftrace function list. This is automatic in the module unload
-code, and the module author does not need to worry about it.
-
-When tracing is enabled, kstop_machine is called to prevent races
-with the CPUS executing code being modified (which can cause the
-CPU to do undesireable things), and the nops are patched back
-to calls. But this time, they do not call mcount (which is just
-a function stub). They now call into the ftrace infrastructure.
+scans this table and updates all the locations into nops. It
+also records the locations, which are added to the
+available_filter_functions list.  Modules are processed as they
+are loaded and before they are executed.  When a module is
+unloaded, it also removes its functions from the ftrace function
+list. This is automatic in the module unload code, and the
+module author does not need to worry about it.
+
+When tracing is enabled, kstop_machine is called to prevent
+races with the CPUS executing code being modified (which can
+cause the CPU to do undesireable things), and the nops are
+patched back to calls. But this time, they do not call mcount
+(which is just a function stub). They now call into the ftrace
+infrastructure.
 
 One special side-effect to the recording of the functions being
 traced is that we can now selectively choose which functions we
-wish to trace and which ones we want the mcount calls to remain as
-nops.
+wish to trace and which ones we want the mcount calls to remain
+as nops.
 
-Two files are used, one for enabling and one for disabling the tracing
-of specified functions. They are:
+Two files are used, one for enabling and one for disabling the
+tracing of specified functions. They are:
 
   set_ftrace_filter
 
@@ -1202,8 +1535,8 @@ and
 
   set_ftrace_notrace
 
-A list of available functions that you can add to these files is listed
-in:
+A list of available functions that you can add to these files is
+listed in:
 
    available_filter_functions
 
@@ -1240,8 +1573,8 @@ hrtimer_interrupt
 sys_nanosleep
 
 
-Perhaps this is not enough. The filters also allow simple wild cards.
-Only the following are currently available
+Perhaps this is not enough. The filters also allow simple wild
+cards. Only the following are currently available
 
   <match>*  - will match functions that begin with <match>
   *<match>  - will match functions that end with <match>
@@ -1251,9 +1584,9 @@ These are the only wild cards which are supported.
 
   <match>*<match> will not work.
 
-Note: It is better to use quotes to enclose the wild cards, otherwise
-  the shell may expand the parameters into names of files in the local
-  directory.
+Note: It is better to use quotes to enclose the wild cards,
+      otherwise the shell may expand the parameters into names
+      of files in the local directory.
 
  # echo 'hrtimer_*' > /debug/tracing/set_ftrace_filter
 
@@ -1299,7 +1632,8 @@ This is because the '>' and '>>' act just like they do in bash.
 To rewrite the filters, use '>'
 To append to the filters, use '>>'
 
-To clear out a filter so that all functions will be recorded again:
+To clear out a filter so that all functions will be recorded
+again:
 
  # echo > /debug/tracing/set_ftrace_filter
  # cat /debug/tracing/set_ftrace_filter
@@ -1331,7 +1665,8 @@ hrtimer_get_res
 hrtimer_init_sleeper
 
 
-The set_ftrace_notrace prevents those functions from being traced.
+The set_ftrace_notrace prevents those functions from being
+traced.
 
  # echo '*preempt*' '*lock*' > /debug/tracing/set_ftrace_notrace
 
@@ -1353,13 +1688,75 @@ Produces:
 
 We can see that there's no more lock or preempt tracing.
 
+
+Dynamic ftrace with the function graph tracer
+---------------------------------------------
+
+Although what has been explained above concerns both the
+function tracer and the function-graph-tracer, there are some
+special features only available in the function-graph tracer.
+
+If you want to trace only one function and all of its children,
+you just have to echo its name into set_graph_function:
+
+ echo __do_fault > set_graph_function
+
+will produce the following "expanded" trace of the __do_fault()
+function:
+
+ 0)               |  __do_fault() {
+ 0)               |    filemap_fault() {
+ 0)               |      find_lock_page() {
+ 0)   0.804 us    |        find_get_page();
+ 0)               |        __might_sleep() {
+ 0)   1.329 us    |        }
+ 0)   3.904 us    |      }
+ 0)   4.979 us    |    }
+ 0)   0.653 us    |    _spin_lock();
+ 0)   0.578 us    |    page_add_file_rmap();
+ 0)   0.525 us    |    native_set_pte_at();
+ 0)   0.585 us    |    _spin_unlock();
+ 0)               |    unlock_page() {
+ 0)   0.541 us    |      page_waitqueue();
+ 0)   0.639 us    |      __wake_up_bit();
+ 0)   2.786 us    |    }
+ 0) + 14.237 us   |  }
+ 0)               |  __do_fault() {
+ 0)               |    filemap_fault() {
+ 0)               |      find_lock_page() {
+ 0)   0.698 us    |        find_get_page();
+ 0)               |        __might_sleep() {
+ 0)   1.412 us    |        }
+ 0)   3.950 us    |      }
+ 0)   5.098 us    |    }
+ 0)   0.631 us    |    _spin_lock();
+ 0)   0.571 us    |    page_add_file_rmap();
+ 0)   0.526 us    |    native_set_pte_at();
+ 0)   0.586 us    |    _spin_unlock();
+ 0)               |    unlock_page() {
+ 0)   0.533 us    |      page_waitqueue();
+ 0)   0.638 us    |      __wake_up_bit();
+ 0)   2.793 us    |    }
+ 0) + 14.012 us   |  }
+
+You can also expand several functions at once:
+
+ echo sys_open > set_graph_function
+ echo sys_close >> set_graph_function
+
+Now if you want to go back to trace all functions you can clear
+this special filter via:
+
+ echo > set_graph_function
+
+
 trace_pipe
 ----------
 
-The trace_pipe outputs the same content as the trace file, but the effect
-on the tracing is different. Every read from trace_pipe is consumed.
-This means that subsequent reads will be different. The trace
-is live.
+The trace_pipe outputs the same content as the trace file, but
+the effect on the tracing is different. Every read from
+trace_pipe is consumed. This means that subsequent reads will be
+different. The trace is live.
 
  # echo function > /debug/tracing/current_tracer
  # cat /debug/tracing/trace_pipe > /tmp/trace.out &
@@ -1387,38 +1784,45 @@ is live.
             bash-4043  [00] 41.267111: select_task_rq_rt <-try_to_wake_up
 
 
-Note, reading the trace_pipe file will block until more input is added.
-By changing the tracer, trace_pipe will issue an EOF. We needed
-to set the function tracer _before_ we "cat" the trace_pipe file.
+Note, reading the trace_pipe file will block until more input is
+added. By changing the tracer, trace_pipe will issue an EOF. We
+needed to set the function tracer _before_ we "cat" the
+trace_pipe file.
 
 
 trace entries
 -------------
 
-Having too much or not enough data can be troublesome in diagnosing
-an issue in the kernel. The file buffer_size_kb is used to modify
-the size of the internal trace buffers. The number listed
-is the number of entries that can be recorded per CPU. To know
-the full size, multiply the number of possible CPUS with the
-number of entries.
+Having too much or not enough data can be troublesome in
+diagnosing an issue in the kernel. The file buffer_size_kb is
+used to modify the size of the internal trace buffers. The
+number listed is the number of entries that can be recorded per
+CPU. To know the full size, multiply the number of possible CPUS
+with the number of entries.
 
  # cat /debug/tracing/buffer_size_kb
 1408 (units kilobytes)
 
-Note, to modify this, you must have tracing completely disabled. To do that,
-echo "nop" into the current_tracer. If the current_tracer is not set
-to "nop", an EINVAL error will be returned.
+Note, to modify this, you must have tracing completely disabled.
+To do that, echo "nop" into the current_tracer. If the
+current_tracer is not set to "nop", an EINVAL error will be
+returned.
 
  # echo nop > /debug/tracing/current_tracer
  # echo 10000 > /debug/tracing/buffer_size_kb
  # cat /debug/tracing/buffer_size_kb
 10000 (units kilobytes)
 
-The number of pages which will be allocated is limited to a percentage
-of available memory. Allocating too much will produce an error.
+The number of pages which will be allocated is limited to a
+percentage of available memory. Allocating too much will produce
+an error.
 
  # echo 1000000000000 > /debug/tracing/buffer_size_kb
 -bash: echo: write error: Cannot allocate memory
  # cat /debug/tracing/buffer_size_kb
 85
 
+-----------
+
+More details can be found in the source code, in the
+kernel/tracing/*.c files.
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index b1b98870124..145c25a170c 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -123,7 +123,10 @@ platform-specific implementation issue.
 
 Using GPIOs
 -----------
-One of the first things to do with a GPIO, often in board setup code when
+The first thing a system should do with a GPIO is allocate it, using
+the gpio_request() call; see later.
+
+One of the next things to do with a GPIO, often in board setup code when
 setting up a platform_device using the GPIO, is mark its direction:
 
 	/* set as input or output, returning 0 or negative errno */
@@ -141,8 +144,8 @@ This helps avoid signal glitching during system startup.
 
 For compatibility with legacy interfaces to GPIOs, setting the direction
 of a GPIO implicitly requests that GPIO (see below) if it has not been
-requested already.  That compatibility may be removed in the future;
-explicitly requesting GPIOs is strongly preferred.
+requested already.  That compatibility is being removed from the optional
+gpiolib framework.
 
 Setting the direction can fail if the GPIO number is invalid, or when
 that particular GPIO can't be used in that mode.  It's generally a bad
@@ -195,7 +198,7 @@ This requires sleeping, which can't be done from inside IRQ handlers.
 
 Platforms that support this type of GPIO distinguish them from other GPIOs
 by returning nonzero from this call (which requires a valid GPIO number,
-either explicitly or implicitly requested):
+which should have been previously allocated with gpio_request):
 
 	int gpio_cansleep(unsigned gpio);
 
@@ -212,10 +215,9 @@ for GPIOs that can't be accessed from IRQ handlers, these calls act the
 same as the spinlock-safe calls.
 
 
-Claiming and Releasing GPIOs (OPTIONAL)
----------------------------------------
+Claiming and Releasing GPIOs
+----------------------------
 To help catch system configuration errors, two calls are defined.
-However, many platforms don't currently support this mechanism.
 
 	/* request GPIO, returning 0 or negative errno.
 	 * non-null labels may be useful for diagnostics.
@@ -244,13 +246,6 @@ Some platforms may also use knowledge about what GPIOs are active for
 power management, such as by powering down unused chip sectors and, more
 easily, gating off unused clocks.
 
-These two calls are optional because not not all current Linux platforms
-offer such functionality in their GPIO support; a valid implementation
-could return success for all gpio_request() calls.  Unlike the other calls,
-the state they represent doesn't normally match anything from a hardware
-register; it's just a software bitmap which clearly is not necessary for
-correct operation of hardware or (bug free) drivers.
-
 Note that requesting a GPIO does NOT cause it to be configured in any
 way; it just marks that GPIO as in use.  Separate code must handle any
 pin setup (e.g. controlling which pin the GPIO uses, pullup/pulldown).
diff --git a/Documentation/hwmon/ds1621 b/Documentation/hwmon/ds1621
index 1fee6f1e6bc..5e97f333c4d 100644
--- a/Documentation/hwmon/ds1621
+++ b/Documentation/hwmon/ds1621
@@ -49,12 +49,9 @@ of up to +/- 0.5 degrees even when compared against precise temperature
 readings. Be sure to have a high vs. low temperature limit gap of al least
 1.0 degree Celsius to avoid Tout "bouncing", though!
 
-As for alarms, you can read the alarm status of the DS1621 via the 'alarms'
-/sys file interface. The result consists mainly of bit 6 and 5 of the
-configuration register of the chip; bit 6 (0x40 or 64) is the high alarm
-bit and bit 5 (0x20 or 32) the low one. These bits are set when the high or
-low limits are met or exceeded and are reset by the module as soon as the
-respective temperature ranges are left.
+The alarm bits are set when the high or low limits are met or exceeded and
+are reset by the module as soon as the respective temperature ranges are
+left.
 
 The alarm registers are in no way suitable to find out about the actual
 status of Tout. They will only tell you about its history, whether or not
@@ -64,45 +61,3 @@ with neither of the alarms set.
 
 Temperature conversion of the DS1621 takes up to 1000ms; internal access to
 non-volatile registers may last for 10ms or below.
-
-High Accuracy Temperature Reading
----------------------------------
-
-As said before, the temperature issued via the 9-bit i2c-bus data is
-somewhat arbitrary. Internally, the temperature conversion is of a
-different kind that is explained (not so...) well in the DS1621 data sheet.
-To cut the long story short: Inside the DS1621 there are two oscillators,
-both of them biassed by a temperature coefficient.
-
-Higher resolution of the temperature reading can be achieved using the
-internal projection, which means taking account of REG_COUNT and REG_SLOPE
-(the driver manages them):
-
-Taken from Dallas Semiconductors App Note 068: 'Increasing Temperature
-Resolution on the DS1620' and App Note 105: 'High Resolution Temperature
-Measurement with Dallas Direct-to-Digital Temperature Sensors'
-
-- Read the 9-bit temperature and strip the LSB (Truncate the .5 degs)
-- The resulting value is TEMP_READ.
-- Then, read REG_COUNT.
-- And then, REG_SLOPE.
-
-      TEMP = TEMP_READ - 0.25 + ((REG_SLOPE - REG_COUNT) / REG_SLOPE)
-
-Note that this is what the DONE bit in the DS1621 configuration register is
-good for: Internally, one temperature conversion takes up to 1000ms. Before
-that conversion is complete you will not be able to read valid things out
-of REG_COUNT and REG_SLOPE. The DONE bit, as you may have guessed by now,
-tells you whether the conversion is complete ("done", in plain English) and
-thus, whether the values you read are good or not.
-
-The DS1621 has two modes of operation: "Continuous" conversion, which can
-be understood as the default stand-alone mode where the chip gets the
-temperature and controls external devices via its Tout pin or tells other
-i2c's about it if they care. The other mode is called "1SHOT", that means
-that it only figures out about the temperature when it is explicitly told
-to do so; this can be seen as power saving mode.
-
-Now if you want to read REG_COUNT and REG_SLOPE, you have to either stop
-the continuous conversions until the contents of these registers are valid,
-or, in 1SHOT mode, you have to have one conversion made.
diff --git a/Documentation/hwmon/g760a b/Documentation/hwmon/g760a
new file mode 100644
index 00000000000..e032eeb7562
--- /dev/null
+++ b/Documentation/hwmon/g760a
@@ -0,0 +1,36 @@
+Kernel driver g760a
+===================
+
+Supported chips:
+  * Global Mixed-mode Technology Inc. G760A
+    Prefix: 'g760a'
+    Datasheet: Publicly available at the GMT website
+      http://www.gmt.com.tw/datasheet/g760a.pdf
+
+Author: Herbert Valerio Riedel <hvr@gnu.org>
+
+Description
+-----------
+
+The GMT G760A Fan Speed PWM Controller is connected directly to a fan
+and performs closed-loop control of the fan speed.
+
+The fan speed is programmed by setting the period via 'pwm1' of two
+consecutive speed pulses. The period is defined in terms of clock
+cycle counts of an assumed 32kHz clock source.
+
+Setting a period of 0 stops the fan; setting the period to 255 sets
+fan to maximum speed.
+
+The measured fan rotation speed returned via 'fan1_input' is derived
+from the measured speed pulse period by assuming again a 32kHz clock
+source and a 2 pulse-per-revolution fan.
+
+The 'alarms' file provides access to the two alarm bits provided by
+the G760A chip's status register: Bit 0 is set when the actual fan
+speed differs more than 20% with respect to the programmed fan speed;
+bit 1 is set when fan speed is below 1920 RPM.
+
+The g760a driver will not update its values more frequently than every
+other second; reading them more often will do no harm, but will return
+'old' values.
diff --git a/Documentation/hwmon/hpfall.c b/Documentation/hwmon/hpfall.c
new file mode 100644
index 00000000000..bbea1ccfd46
--- /dev/null
+++ b/Documentation/hwmon/hpfall.c
@@ -0,0 +1,101 @@
+/* Disk protection for HP machines.
+ *
+ * Copyright 2008 Eric Piel
+ * Copyright 2009 Pavel Machek <pavel@suse.cz>
+ *
+ * GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <signal.h>
+
+void write_int(char *path, int i)
+{
+	char buf[1024];
+	int fd = open(path, O_RDWR);
+	if (fd < 0) {
+		perror("open");
+		exit(1);
+	}
+	sprintf(buf, "%d", i);
+	if (write(fd, buf, strlen(buf)) != strlen(buf)) {
+		perror("write");
+		exit(1);
+	}
+	close(fd);
+}
+
+void set_led(int on)
+{
+	write_int("/sys/class/leds/hp::hddprotect/brightness", on);
+}
+
+void protect(int seconds)
+{
+	write_int("/sys/block/sda/device/unload_heads", seconds*1000);
+}
+
+int on_ac(void)
+{
+//	/sys/class/power_supply/AC0/online
+}
+
+int lid_open(void)
+{
+//	/proc/acpi/button/lid/LID/state
+}
+
+void ignore_me(void)
+{
+	protect(0);
+	set_led(0);
+
+}
+
+int main(int argc, char* argv[])
+{
+       int fd, ret;
+
+       fd = open("/dev/freefall", O_RDONLY);
+       if (fd < 0) {
+               perror("open");
+               return EXIT_FAILURE;
+       }
+
+	signal(SIGALRM, ignore_me);
+
+       for (;;) {
+	       unsigned char count;
+
+               ret = read(fd, &count, sizeof(count));
+	       alarm(0);
+	       if ((ret == -1) && (errno == EINTR)) {
+		       /* Alarm expired, time to unpark the heads */
+		       continue;
+	       }
+
+               if (ret != sizeof(count)) {
+                       perror("read");
+                       break;
+               }
+
+	       protect(21);
+	       set_led(1);
+	       if (1 || on_ac() || lid_open()) {
+		       alarm(2);
+	       } else {
+		       alarm(20);
+	       }
+       }
+
+       close(fd);
+       return EXIT_SUCCESS;
+}
diff --git a/Documentation/hwmon/lis3lv02d b/Documentation/hwmon/lis3lv02d
index 0fcfc4a7ccd..effe949a728 100644
--- a/Documentation/hwmon/lis3lv02d
+++ b/Documentation/hwmon/lis3lv02d
@@ -1,11 +1,11 @@
 Kernel driver lis3lv02d
-==================
+=======================
 
 Supported chips:
 
   * STMicroelectronics LIS3LV02DL and LIS3LV02DQ
 
-Author:
+Authors:
         Yan Burman <burman.yan@gmail.com>
 	Eric Piel <eric.piel@tremplin-utc.net>
 
@@ -15,7 +15,7 @@ Description
 
 This driver provides support for the accelerometer found in various HP
 laptops sporting the feature officially called "HP Mobile Data
-Protection System 3D" or "HP 3D DriveGuard". It detect automatically
+Protection System 3D" or "HP 3D DriveGuard". It detects automatically
 laptops with this sensor. Known models (for now the HP 2133, nc6420,
 nc2510, nc8510, nc84x0, nw9440 and nx9420) will have their axis
 automatically oriented on standard way (eg: you can directly play
@@ -27,12 +27,20 @@ position - 3D position that the accelerometer reports. Format: "(x,y,z)"
 calibrate - read: values (x, y, z) that are used as the base for input
 		  class device operation.
             write: forces the base to be recalibrated with the current
-		  position.
+		   position.
 rate - reports the sampling rate of the accelerometer device in HZ
 
 This driver also provides an absolute input class device, allowing
 the laptop to act as a pinball machine-esque joystick.
 
+Another feature of the driver is misc device called "freefall" that
+acts similar to /dev/rtc and reacts on free-fall interrupts received
+from the device. It supports blocking operations, poll/select and
+fasync operation modes. You must read 1 bytes from the device.  The
+result is number of free-fall interrupts since the last successful
+read (or 255 if number of interrupts would not fit).
+
+
 Axes orientation
 ----------------
 
@@ -40,7 +48,7 @@ For better compatibility between the various laptops. The values reported by
 the accelerometer are converted into a "standard" organisation of the axes
 (aka "can play neverball out of the box"):
  * When the laptop is horizontal the position reported is about 0 for X and Y
-and a positive value for Z
+	and a positive value for Z
  * If the left side is elevated, X increases (becomes positive)
  * If the front side (where the touchpad is) is elevated, Y decreases
 	(becomes negative)
@@ -51,3 +59,13 @@ email to the authors to add it to the database.  When reporting a new
 laptop, please include the output of "dmidecode" plus the value of
 /sys/devices/platform/lis3lv02d/position in these four cases.
 
+Q&A
+---
+
+Q: How do I safely simulate freefall? I have an HP "portable
+workstation" which has about 3.5kg and a plastic case, so letting it
+fall to the ground is out of question...
+
+A: The sensor is pretty sensitive, so your hands can do it. Lift it
+into free space, follow the fall with your hands for like 10
+centimeters. That should be enough to trigger the detection.
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index 0e841171023..93d8e3d5515 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -42,6 +42,11 @@ Supported chips:
     Addresses scanned: I2C 0x4e
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
+  * Maxim MAX6648
+    Prefix: 'max6646'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
   * Maxim MAX6649
     Prefix: 'max6646'
     Addresses scanned: I2C 0x4c
@@ -74,6 +79,11 @@ Supported chips:
                            0x4c, 0x4d and 0x4e
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
+  * Maxim MAX6692
+    Prefix: 'max6646'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
 
 
 Author: Jean Delvare <khali@linux-fr.org>
diff --git a/Documentation/hwmon/ltc4215 b/Documentation/hwmon/ltc4215
new file mode 100644
index 00000000000..2e6a21eb656
--- /dev/null
+++ b/Documentation/hwmon/ltc4215
@@ -0,0 +1,50 @@
+Kernel driver ltc4215
+=====================
+
+Supported chips:
+  * Linear Technology LTC4215
+    Prefix: 'ltc4215'
+    Addresses scanned: 0x44
+    Datasheet:
+        http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1163,P17572,D12697
+
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+
+
+Description
+-----------
+
+The LTC4215 controller allows a board to be safely inserted and removed
+from a live backplane.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for LTC4215 devices, due to the fact that some
+of the possible addresses are unfriendly to probing. You will need to use
+the "force" parameter to tell the driver where to find the device.
+
+Example: the following will load the driver for an LTC4215 at address 0x44
+on I2C bus #0:
+$ modprobe ltc4215 force=0,0x44
+
+
+Sysfs entries
+-------------
+
+The LTC4215 has built-in limits for overvoltage, undervoltage, and
+undercurrent warnings. This makes it very likely that the reference
+circuit will be used.
+
+in1_input		input voltage
+in2_input		output voltage
+
+in1_min_alarm		input undervoltage alarm
+in1_max_alarm		input overvoltage alarm
+
+curr1_input		current
+curr1_max_alarm		overcurrent alarm
+
+power1_input		power usage
+power1_alarm		power bad alarm
diff --git a/Documentation/i2c/chips/pcf8591 b/Documentation/hwmon/pcf8591
index 5628fcf4207..5628fcf4207 100644
--- a/Documentation/i2c/chips/pcf8591
+++ b/Documentation/hwmon/pcf8591
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 6dbfd5efd99..2f10ce6a879 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -365,6 +365,7 @@ energy[1-*]_input		Cumulative energy use
 				Unit: microJoule
 				RO
 
+
 **********
 * Alarms *
 **********
@@ -453,6 +454,27 @@ beep_mask	Bitmask for beep.
 		RW
 
 
+***********************
+* Intrusion detection *
+***********************
+
+intrusion[0-*]_alarm
+		Chassis intrusion detection
+		0: OK
+		1: intrusion detected
+		RW
+		Contrary to regular alarm flags which clear themselves
+		automatically when read, this one sticks until cleared by
+		the user. This is done by writing 0 to the file. Writing
+		other values is unsupported.
+
+intrusion[0-*]_beep
+		Chassis intrusion beep
+		0: disable
+		1: enable
+		RW
+
+
 sysfs attribute writes interpretation
 -------------------------------------
 
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index d6e1ae30fa6..b6eb59384bb 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -2,30 +2,40 @@ Kernel driver w83627ehf
 =======================
 
 Supported chips:
-  * Winbond W83627EHF/EHG/DHG (ISA access ONLY)
+  * Winbond W83627EHF/EHG (ISA access ONLY)
     Prefix: 'w83627ehf'
     Addresses scanned: ISA address retrieved from Super I/O registers
     Datasheet:
-        http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83627EHF_%20W83627EHGb.pdf
-        DHG datasheet confidential.
+        http://www.nuvoton.com.tw/NR/rdonlyres/A6A258F0-F0C9-4F97-81C0-C4D29E7E943E/0/W83627EHF.pdf
+  * Winbond W83627DHG
+    Prefix: 'w83627dhg'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet:
+        http://www.nuvoton.com.tw/NR/rdonlyres/7885623D-A487-4CF9-A47F-30C5F73D6FE6/0/W83627DHG.pdf
+  * Winbond W83667HG
+    Prefix: 'w83667hg'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet: not available
 
 Authors:
         Jean Delvare <khali@linux-fr.org>
         Yuan Mu (Winbond)
         Rudolf Marek <r.marek@assembler.cz>
         David Hubbard <david.c.hubbard@gmail.com>
+        Gong Jun <JGong@nuvoton.com>
 
 Description
 -----------
 
-This driver implements support for the Winbond W83627EHF, W83627EHG, and
-W83627DHG super I/O chips. We will refer to them collectively as Winbond chips.
+This driver implements support for the Winbond W83627EHF, W83627EHG,
+W83627DHG and W83667HG super I/O chips. We will refer to them collectively
+as Winbond chips.
 
 The chips implement three temperature sensors, five fan rotation
 speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
-VID (6 pins for the 627EHF/EHG, 8 pins for the 627DHG), alarms with beep
-warnings (control unimplemented), and some automatic fan regulation
-strategies (plus manual fan control mode).
+VID (6 pins for the 627EHF/EHG, 8 pins for the 627DHG and 667HG), alarms
+with beep warnings (control unimplemented), and some automatic fan
+regulation strategies (plus manual fan control mode).
 
 Temperatures are measured in degrees Celsius and measurement resolution is 1
 degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when
@@ -54,7 +64,8 @@ follows:
 temp1 -> pwm1
 temp2 -> pwm2
 temp3 -> pwm3
-prog  -> pwm4 (the programmable setting is not supported by the driver)
+prog  -> pwm4 (not on 667HG; the programmable setting is not supported by
+	       the driver)
 
 /sys files
 ----------
diff --git a/Documentation/i2c/busses/i2c-nforce2 b/Documentation/i2c/busses/i2c-nforce2
index fae3495bcba..9698c396b83 100644
--- a/Documentation/i2c/busses/i2c-nforce2
+++ b/Documentation/i2c/busses/i2c-nforce2
@@ -7,10 +7,14 @@ Supported adapters:
   * nForce3 250Gb MCP          10de:00E4 
   * nForce4 MCP                10de:0052
   * nForce4 MCP-04             10de:0034
-  * nForce4 MCP51              10de:0264
-  * nForce4 MCP55              10de:0368
-  * nForce4 MCP61              10de:03EB
-  * nForce4 MCP65              10de:0446
+  * nForce MCP51               10de:0264
+  * nForce MCP55               10de:0368
+  * nForce MCP61               10de:03EB
+  * nForce MCP65               10de:0446
+  * nForce MCP67               10de:0542
+  * nForce MCP73               10de:07D8
+  * nForce MCP78S              10de:0752
+  * nForce MCP79               10de:0AA2
 
 Datasheet: not publicly available, but seems to be similar to the
            AMD-8111 SMBus 2.0 adapter.
diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index ef1efa79b1d..f889481762b 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -4,7 +4,7 @@ Supported adapters:
   * Intel 82371AB PIIX4 and PIIX4E
   * Intel 82443MX (440MX)
     Datasheet: Publicly available at the Intel website
-  * ServerWorks OSB4, CSB5, CSB6 and HT-1000 southbridges
+  * ServerWorks OSB4, CSB5, CSB6, HT-1000 and HT-1100 southbridges
     Datasheet: Only available via NDA from ServerWorks
   * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges
     Datasheet: Not publicly available
diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
new file mode 100644
index 00000000000..b55ce57a84d
--- /dev/null
+++ b/Documentation/i2c/instantiating-devices
@@ -0,0 +1,167 @@
+How to instantiate I2C devices
+==============================
+
+Unlike PCI or USB devices, I2C devices are not enumerated at the hardware
+level. Instead, the software must know which devices are connected on each
+I2C bus segment, and what address these devices are using. For this
+reason, the kernel code must instantiate I2C devices explicitly. There are
+several ways to achieve this, depending on the context and requirements.
+
+
+Method 1: Declare the I2C devices by bus number
+-----------------------------------------------
+
+This method is appropriate when the I2C bus is a system bus as is the case
+for many embedded systems. On such systems, each I2C bus has a number
+which is known in advance. It is thus possible to pre-declare the I2C
+devices which live on this bus. This is done with an array of struct
+i2c_board_info which is registered by calling i2c_register_board_info().
+
+Example (from omap2 h4):
+
+static struct i2c_board_info __initdata h4_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("isp1301_omap", 0x2d),
+		.irq		= OMAP_GPIO_IRQ(125),
+	},
+	{	/* EEPROM on mainboard */
+		I2C_BOARD_INFO("24c01", 0x52),
+		.platform_data	= &m24c01,
+	},
+	{	/* EEPROM on cpu card */
+		I2C_BOARD_INFO("24c01", 0x57),
+		.platform_data	= &m24c01,
+	},
+};
+
+static void __init omap_h4_init(void)
+{
+	(...)
+	i2c_register_board_info(1, h4_i2c_board_info,
+			ARRAY_SIZE(h4_i2c_board_info));
+	(...)
+}
+
+The above code declares 3 devices on I2C bus 1, including their respective
+addresses and custom data needed by their drivers. When the I2C bus in
+question is registered, the I2C devices will be instantiated automatically
+by i2c-core.
+
+The devices will be automatically unbound and destroyed when the I2C bus
+they sit on goes away (if ever.)
+
+
+Method 2: Instantiate the devices explicitly
+--------------------------------------------
+
+This method is appropriate when a larger device uses an I2C bus for
+internal communication. A typical case is TV adapters. These can have a
+tuner, a video decoder, an audio decoder, etc. usually connected to the
+main chip by the means of an I2C bus. You won't know the number of the I2C
+bus in advance, so the method 1 described above can't be used. Instead,
+you can instantiate your I2C devices explicitly. This is done by filling
+a struct i2c_board_info and calling i2c_new_device().
+
+Example (from the sfe4001 network driver):
+
+static struct i2c_board_info sfe4001_hwmon_info = {
+	I2C_BOARD_INFO("max6647", 0x4e),
+};
+
+int sfe4001_init(struct efx_nic *efx)
+{
+	(...)
+	efx->board_info.hwmon_client =
+		i2c_new_device(&efx->i2c_adap, &sfe4001_hwmon_info);
+
+	(...)
+}
+
+The above code instantiates 1 I2C device on the I2C bus which is on the
+network adapter in question.
+
+A variant of this is when you don't know for sure if an I2C device is
+present or not (for example for an optional feature which is not present
+on cheap variants of a board but you have no way to tell them apart), or
+it may have different addresses from one board to the next (manufacturer
+changing its design without notice). In this case, you can call
+i2c_new_probed_device() instead of i2c_new_device().
+
+Example (from the pnx4008 OHCI driver):
+
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
+
+static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
+{
+	(...)
+	struct i2c_adapter *i2c_adap;
+	struct i2c_board_info i2c_info;
+
+	(...)
+	i2c_adap = i2c_get_adapter(2);
+	memset(&i2c_info, 0, sizeof(struct i2c_board_info));
+	strlcpy(i2c_info.name, "isp1301_pnx", I2C_NAME_SIZE);
+	isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
+						   normal_i2c);
+	i2c_put_adapter(i2c_adap);
+	(...)
+}
+
+The above code instantiates up to 1 I2C device on the I2C bus which is on
+the OHCI adapter in question. It first tries at address 0x2c, if nothing
+is found there it tries address 0x2d, and if still nothing is found, it
+simply gives up.
+
+The driver which instantiated the I2C device is responsible for destroying
+it on cleanup. This is done by calling i2c_unregister_device() on the
+pointer that was earlier returned by i2c_new_device() or
+i2c_new_probed_device().
+
+
+Method 3: Probe an I2C bus for certain devices
+----------------------------------------------
+
+Sometimes you do not have enough information about an I2C device, not even
+to call i2c_new_probed_device(). The typical case is hardware monitoring
+chips on PC mainboards. There are several dozen models, which can live
+at 25 different addresses. Given the huge number of mainboards out there,
+it is next to impossible to build an exhaustive list of the hardware
+monitoring chips being used. Fortunately, most of these chips have
+manufacturer and device ID registers, so they can be identified by
+probing.
+
+In that case, I2C devices are neither declared nor instantiated
+explicitly. Instead, i2c-core will probe for such devices as soon as their
+drivers are loaded, and if any is found, an I2C device will be
+instantiated automatically. In order to prevent any misbehavior of this
+mechanism, the following restrictions apply:
+* The I2C device driver must implement the detect() method, which
+  identifies a supported device by reading from arbitrary registers.
+* Only buses which are likely to have a supported device and agree to be
+  probed, will be probed. For example this avoids probing for hardware
+  monitoring chips on a TV adapter.
+
+Example:
+See lm90_driver and lm90_detect() in drivers/hwmon/lm90.c
+
+I2C devices instantiated as a result of such a successful probe will be
+destroyed automatically when the driver which detected them is removed,
+or when the underlying I2C bus is itself destroyed, whichever happens
+first.
+
+Those of you familiar with the i2c subsystem of 2.4 kernels and early 2.6
+kernels will find out that this method 3 is essentially similar to what
+was done there. Two significant differences are:
+* Probing is only one way to instantiate I2C devices now, while it was the
+  only way back then. Where possible, methods 1 and 2 should be preferred.
+  Method 3 should only be used when there is no other way, as it can have
+  undesirable side effects.
+* I2C buses must now explicitly say which I2C driver classes can probe
+  them (by the means of the class bitfield), while all I2C buses were
+  probed by default back then. The default is an empty class which means
+  that no probing happens. The purpose of the class bitfield is to limit
+  the aforementioned undesirable side effects.
+
+Once again, method 3 should be avoided wherever possible. Explicit device
+instantiation (methods 1 and 2) is much preferred for it is safer and
+faster.
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index 6b9af7d479c..c1a06f989cf 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -207,15 +207,26 @@ You simply have to define a detect callback which will attempt to
 identify supported devices (returning 0 for supported ones and -ENODEV
 for unsupported ones), a list of addresses to probe, and a device type
 (or class) so that only I2C buses which may have that type of device
-connected (and not otherwise enumerated) will be probed.  The i2c
-core will then call you back as needed and will instantiate a device
-for you for every successful detection.
+connected (and not otherwise enumerated) will be probed.  For example,
+a driver for a hardware monitoring chip for which auto-detection is
+needed would set its class to I2C_CLASS_HWMON, and only I2C adapters
+with a class including I2C_CLASS_HWMON would be probed by this driver.
+Note that the absence of matching classes does not prevent the use of
+a device of that type on the given I2C adapter.  All it prevents is
+auto-detection; explicit instantiation of devices is still possible.
 
 Note that this mechanism is purely optional and not suitable for all
 devices.  You need some reliable way to identify the supported devices
 (typically using device-specific, dedicated identification registers),
 otherwise misdetections are likely to occur and things can get wrong
-quickly.
+quickly.  Keep in mind that the I2C protocol doesn't include any
+standard way to detect the presence of a chip at a given address, let
+alone a standard way to identify devices.  Even worse is the lack of
+semantics associated to bus transfers, which means that the same
+transfer can be seen as a read operation by a chip and as a write
+operation by another chip.  For these reasons, explicit device
+instantiation should always be preferred to auto-detection where
+possible.
 
 
 Device Deletion
diff --git a/Documentation/ia64/kvm.txt b/Documentation/ia64/kvm.txt
index 84f7cb3d5be..ffb5c80bec3 100644
--- a/Documentation/ia64/kvm.txt
+++ b/Documentation/ia64/kvm.txt
@@ -42,7 +42,7 @@ Note: For step 2, please make sure that host page size == TARGET_PAGE_SIZE of qe
 		hg clone http://xenbits.xensource.com/ext/efi-vfirmware.hg
 	    you can get the firmware's binary in the directory of efi-vfirmware.hg/binaries.
 
-	(3) Rename the firware you owned to Flash.fd, and copy it to /usr/local/share/qemu
+	(3) Rename the firmware you owned to Flash.fd, and copy it to /usr/local/share/qemu
 
 4. Boot up Linux or Windows guests:
 	4.1 Create or install a image for guest boot. If you have xen experience, it should be easy.
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index f1d63990332..1f779a25c70 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -122,10 +122,8 @@ Code	Seq#	Include File		Comments
 'c'	00-7F	linux/coda.h		conflict!
 'c'	80-9F	arch/s390/include/asm/chsc.h
 'd'	00-FF	linux/char/drm/drm/h	conflict!
-'d'	00-DF	linux/video_decoder.h	conflict!
 'd'	F0-FF	linux/digi1.h
 'e'	all	linux/digi1.h		conflict!
-'e'	00-1F	linux/video_encoder.h	conflict!
 'e'	00-1F	net/irda/irtty.h	conflict!
 'f'	00-1F	linux/ext2_fs.h
 'h'	00-7F				Charon filesystem
diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index 55b2852904a..02c0e9341dd 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -61,24 +61,28 @@ GigaSet 307x Device Driver
      ---------------------
 2.1. Modules
      -------
-     To get the device working, you have to load the proper kernel module. You
-     can do this using
-         modprobe modulename
-     where modulename is ser_gigaset (M101), usb_gigaset (M105), or
-     bas_gigaset (direct USB connection to the base).
+     For the devices to work, the proper kernel modules have to be loaded.
+     This normally happens automatically when the system detects the USB
+     device (base, M105) or when the line discipline is attached (M101). It
+     can also be triggered manually using the modprobe(8) command, for example
+     for troubleshooting or to pass module parameters.
 
      The module ser_gigaset provides a serial line discipline N_GIGASET_M101
-     which drives the device through the regular serial line driver. To use it,
-     run the Gigaset M101 daemon "gigasetm101d" (also available from
-     http://sourceforge.net/projects/gigaset307x/) with the device file of the
-     RS232 port to the M101 as an argument, for example:
-	 gigasetm101d /dev/ttyS1
-     This will open the device file, set its line discipline to N_GIGASET_M101,
-     and then sleep in the background, keeping the device open so that the
-     line discipline remains active. To deactivate it, kill the daemon, for
-     example with
-	 killall gigasetm101d
-     before disconnecting the device.
+     which drives the device through the regular serial line driver. It must
+     be attached to the serial line to which the M101 is connected with the
+     ldattach(8) command (requires util-linux-ng release 2.14 or later), for
+     example:
+	 ldattach GIGASET_M101 /dev/ttyS1
+     This will open the device file, attach the line discipline to it, and
+     then sleep in the background, keeping the device open so that the line
+     discipline remains active. To deactivate it, kill the daemon, for example
+     with
+	 killall ldattach
+     before disconnecting the device. To have this happen automatically at
+     system startup/shutdown on an LSB compatible system, create and activate
+     an appropriate LSB startup script /etc/init.d/gigaset. (The init name
+     'gigaset' is officially assigned to this project by LANANA.)
+     Alternatively, just add the 'ldattach' command line to /etc/rc.local.
 
 2.2. Device nodes for user space programs
      ------------------------------------
@@ -194,10 +198,11 @@ GigaSet 307x Device Driver
      operation (for wireless access to the base), but are needed for access
      to the M105's own configuration mode (registration to the base, baudrate
      and line format settings, device status queries) via the gigacontr
-     utility. Their use is disabled in the driver by default for safety
-     reasons but can be enabled by setting the kernel configuration option
-     "Support for undocumented USB requests" (GIGASET_UNDOCREQ) to "Y" and
-     recompiling.
+     utility. Their use is controlled by the kernel configuration option
+     "Support for undocumented USB requests" (CONFIG_GIGASET_UNDOCREQ). If you
+     encounter error code -ENOTTY when trying to use some features of the
+     M105, try setting that option to "y" via 'make {x,menu}config' and
+     recompiling the driver.
 
 
 3.   Troubleshooting
@@ -228,6 +233,13 @@ GigaSet 307x Device Driver
      Solution:
         Select Unimodem mode for all DECT data adapters. (see section 2.4.)
 
+     Problem:
+        You want to configure your USB DECT data adapter (M105) but gigacontr
+        reports an error: "/dev/ttyGU0: Inappropriate ioctl for device".
+     Solution:
+        Recompile the usb_gigaset driver with the kernel configuration option
+        CONFIG_GIGASET_UNDOCREQ set to 'y'. (see section 2.6.)
+
 3.2. Telling the driver to provide more information
      ----------------------------------------------
      Building the driver with the "Gigaset debugging" kernel configuration
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index d73fbd2b2b4..026ec7d5738 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -43,7 +43,8 @@ Only comments so marked will be considered by the kernel-doc scripts,
 and any comment so marked must be in kernel-doc format.  Do not use
 "/**" to be begin a comment block unless the comment block contains
 kernel-doc formatted comments.  The closing comment marker for
-kernel-doc comments can be either "*/" or "**/".
+kernel-doc comments can be either "*/" or "**/", but "*/" is
+preferred in the Linux kernel tree.
 
 Kernel-doc comments should be placed just before the function
 or data structure being described.
@@ -63,7 +64,7 @@ Example kernel-doc function comment:
  * comment lines.
  *
  * The longer description can have multiple paragraphs.
- **/
+ */
 
 The first line, with the short description, must be on a single line.
 
@@ -85,7 +86,7 @@ Example kernel-doc data structure comment.
  *		perhaps with more lines and words.
  *
  * Longer description of this structure.
- **/
+ */
 
 The kernel-doc function comments describe each parameter to the
 function, in order, with the @name lines.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index d8362cf9909..6172e4360f6 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -44,11 +44,13 @@ parameter is applicable:
 	FB	The frame buffer device is enabled.
 	HW	Appropriate hardware is enabled.
 	IA-64	IA-64 architecture is enabled.
+	IMA     Integrity measurement architecture is enabled.
 	IOSCHED	More than one I/O scheduler is enabled.
 	IP_PNP	IP DHCP, BOOTP, or RARP is enabled.
 	ISAPNP	ISA PnP code is enabled.
 	ISDN	Appropriate ISDN support is enabled.
 	JOY	Appropriate joystick support is enabled.
+	KMEMTRACE kmemtrace is enabled.
 	LIBATA  Libata driver is enabled
 	LP	Printer support is enabled.
 	LOOP	Loopback device support is enabled.
@@ -114,7 +116,7 @@ In addition, the following text indicates that the option:
 Parameters denoted with BOOT are actually interpreted by the boot
 loader, and have no meaning to the kernel directly.
 Do not modify the syntax of boot loader parameters without extreme
-need or coordination with <Documentation/x86/i386/boot.txt>.
+need or coordination with <Documentation/x86/boot.txt>.
 
 There are also arch-specific kernel-parameters not documented here.
 See for example <Documentation/x86/x86_64/boot-options.txt>.
@@ -134,7 +136,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	acpi=		[HW,ACPI,X86-64,i386]
 			Advanced Configuration and Power Interface
-			Format: { force | off | ht | strict | noirq }
+			Format: { force | off | ht | strict | noirq | rsdt }
 			force -- enable ACPI if default was off
 			off -- disable ACPI if default was on
 			noirq -- do not use ACPI for IRQ routing
@@ -151,60 +153,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			1,0: use 1st APIC table
 			default: 0
 
-	acpi_sleep=	[HW,ACPI] Sleep options
-			Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
-				  old_ordering, s4_nonvs }
-			See Documentation/power/video.txt for information on
-			s3_bios and s3_mode.
-			s3_beep is for debugging; it makes the PC's speaker beep
-			as soon as the kernel's real-mode entry point is called.
-			s4_nohwsig prevents ACPI hardware signature from being
-			used during resume from hibernation.
-			old_ordering causes the ACPI 1.0 ordering of the _PTS
-			control method, with respect to putting devices into
-			low power states, to be enforced (the ACPI 2.0 ordering
-			of _PTS is used by default).
-			s4_nonvs prevents the kernel from saving/restoring the
-			ACPI NVS memory during hibernation.
-
-	acpi_sci=	[HW,ACPI] ACPI System Control Interrupt trigger mode
-			Format: { level | edge | high | low }
-
-	acpi_irq_balance [HW,ACPI]
-			ACPI will balance active IRQs
-			default in APIC mode
-
-	acpi_irq_nobalance [HW,ACPI]
-			ACPI will not move active IRQs (default)
-			default in PIC mode
-
-	acpi_irq_pci=	[HW,ACPI] If irq_balance, clear listed IRQs for
-			use by PCI
-			Format: <irq>,<irq>...
-
-	acpi_irq_isa=	[HW,ACPI] If irq_balance, mark listed IRQs used by ISA
-			Format: <irq>,<irq>...
-
-	acpi_no_auto_ssdt	[HW,ACPI] Disable automatic loading of SSDT
-
-	acpi_os_name=	[HW,ACPI] Tell ACPI BIOS the name of the OS
-			Format: To spoof as Windows 98: ="Microsoft Windows"
-
-	acpi_osi=	[HW,ACPI] Modify list of supported OS interface strings
-			acpi_osi="string1"	# add string1 -- only one string
-			acpi_osi="!string2"	# remove built-in string2
-			acpi_osi=		# disable all strings
-
-	acpi_serialize	[HW,ACPI] force serialization of AML methods
-
-	acpi_skip_timer_override [HW,ACPI]
-			Recognize and ignore IRQ0/pin2 Interrupt Override.
-			For broken nForce2 BIOS resulting in XT-PIC timer.
-	acpi_use_timer_override [HW,ACPI]
-			Use timer override. For some broken Nvidia NF5 boards
-			that require a timer override, but don't have
-			HPET
-
 	acpi_backlight=	[HW,ACPI]
 			acpi_backlight=vendor
 			acpi_backlight=video
@@ -212,11 +160,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			(e.g. thinkpad_acpi, sony_acpi, etc.) instead
 			of the ACPI video.ko driver.
 
-	acpi_display_output=	[HW,ACPI]
-			acpi_display_output=vendor
-			acpi_display_output=video
-			See above.
-
 	acpi.debug_layer=	[HW,ACPI,ACPI_DEBUG]
 	acpi.debug_level=	[HW,ACPI,ACPI_DEBUG]
 			Format: <int>
@@ -245,6 +188,41 @@ and is between 256 and 4096 characters. It is defined in the file
 			unusable.  The "log_buf_len" parameter may be useful
 			if you need to capture more output.
 
+	acpi_display_output=	[HW,ACPI]
+			acpi_display_output=vendor
+			acpi_display_output=video
+			See above.
+
+	acpi_irq_balance [HW,ACPI]
+			ACPI will balance active IRQs
+			default in APIC mode
+
+	acpi_irq_nobalance [HW,ACPI]
+			ACPI will not move active IRQs (default)
+			default in PIC mode
+
+	acpi_irq_isa=	[HW,ACPI] If irq_balance, mark listed IRQs used by ISA
+			Format: <irq>,<irq>...
+
+	acpi_irq_pci=	[HW,ACPI] If irq_balance, clear listed IRQs for
+			use by PCI
+			Format: <irq>,<irq>...
+
+	acpi_no_auto_ssdt	[HW,ACPI] Disable automatic loading of SSDT
+
+	acpi_os_name=	[HW,ACPI] Tell ACPI BIOS the name of the OS
+			Format: To spoof as Windows 98: ="Microsoft Windows"
+
+	acpi_osi=	[HW,ACPI] Modify list of supported OS interface strings
+			acpi_osi="string1"	# add string1 -- only one string
+			acpi_osi="!string2"	# remove built-in string2
+			acpi_osi=		# disable all strings
+
+	acpi_pm_good	[X86-32,X86-64]
+			Override the pmtimer bug detection: force the kernel
+			to assume that this machine's pmtimer latches its value
+			and always returns good values.
+
  	acpi.power_nocheck=	[HW,ACPI]
  			Format: 1/0 enable/disable the check of power state.
  			On some bogus BIOS the _PSC object/_STA object of
@@ -253,26 +231,21 @@ and is between 256 and 4096 characters. It is defined in the file
  			power state again in power transition.
  			1 : disable the power state check
 
-	acpi_pm_good	[X86-32,X86-64]
-			Override the pmtimer bug detection: force the kernel
-			to assume that this machine's pmtimer latches its value
-			and always returns good values.
-
-	agp=		[AGP]
-			{ off | try_unsupported }
-			off: disable AGP support
-			try_unsupported: try to drive unsupported chipsets
-				(may crash computer or cause data corruption)
-
-	enable_timer_pin_1 [i386,x86-64]
-			Enable PIN 1 of APIC timer
-			Can be useful to work around chipset bugs
-			(in particular on some ATI chipsets).
-			The kernel tries to set a reasonable default.
-
-	disable_timer_pin_1 [i386,x86-64]
-			Disable PIN 1 of APIC timer
-			Can be useful to work around chipset bugs.
+	acpi_enforce_resources=	[ACPI]
+			{ strict | lax | no }
+			Check for resource conflicts between native drivers
+			and ACPI OperationRegions (SystemIO and SystemMemory
+			only). IO ports and memory declared in ACPI might be
+			used by the ACPI subsystem in arbitrary AML code and
+			can interfere with legacy drivers.
+			strict (default): access to resources claimed by ACPI
+			is denied; legacy drivers trying to access reserved
+			resources will fail to bind to device using them.
+			lax: access to resources claimed by ACPI is allowed;
+			legacy drivers trying to access reserved resources
+			will bind successfully but a warning message is logged.
+			no: ACPI OperationRegions are not marked as reserved,
+			no further checks are performed.
 
 	ad1848=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>,<type>
@@ -287,6 +260,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
 			See also header of sound/oss/aedsp16.c.
 
+	agp=		[AGP]
+			{ off | try_unsupported }
+			off: disable AGP support
+			try_unsupported: try to drive unsupported chipsets
+				(may crash computer or cause data corruption)
+
 	aha152x=	[HW,SCSI]
 			See Documentation/scsi/aha152x.txt.
 
@@ -414,12 +393,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			possible to determine what the correct size should be.
 			This option provides an override for these situations.
 
-	security=	[SECURITY] Choose a security module to enable at boot.
-			If this boot parameter is not specified, only the first
-			security module asking for security registration will be
-			loaded. An invalid security module name will be treated
-			as if no module has been chosen.
-
 	capability.disable=
 			[SECURITY] Disable capabilities.  This would normally
 			be used only if an alternative security model is to be
@@ -491,12 +464,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Range: 0 - 8192
 			Default: 64
 
-	hpet=		[X86-32,HPET] option to control HPET usage
-			Format: { enable (default) | disable | force }
-			disable: disable HPET and use PIT instead
-			force: allow force enabled of undocumented chips (ICH4,
-			VIA, nVidia)
-
 	com20020=	[HW,NET] ARCnet - COM20020 chipset
 			Format:
 			<io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]
@@ -540,23 +507,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			console=brl,ttyS0
 		For now, only VisioBraille is supported.
 
-	earlycon=	[KNL] Output early console device and options.
-		uart[8250],io,<addr>[,options]
-		uart[8250],mmio,<addr>[,options]
-			Start an early, polled-mode console on the 8250/16550
-			UART at the specified I/O port or MMIO address.
-			The options are the same as for ttyS, above.
-
-	no_console_suspend
-			[HW] Never suspend the console
-			Disable suspending of consoles during suspend and
-			hibernate operations.  Once disabled, debugging
-			messages can reach various consoles while the rest
-			of the system is being put to sleep (ie, while
-			debugging driver suspend/resume hooks).  This may
-			not work reliably with all consoles, but is known
-			to work with serial and VGA consoles.
-
 	coredump_filter=
 			[KNL] Change the default value for
 			/proc/<pid>/coredump_filter.
@@ -604,36 +554,22 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	debug_objects	[KNL] Enable object debugging
 
+	no_debug_objects
+			[KNL] Disable object debugging
+
 	debugpat	[X86] Enable PAT debugging
 
 	decnet.addr=	[HW,NET]
 			Format: <area>[,<node>]
 			See also Documentation/networking/decnet.txt.
 
-	vt.default_blu=	[VT]
-			Format: <blue0>,<blue1>,<blue2>,...,<blue15>
-			Change the default blue palette of the console.
-			This is a 16-member array composed of values
-			ranging from 0-255.
-
-	vt.default_grn=	[VT]
-			Format: <green0>,<green1>,<green2>,...,<green15>
-			Change the default green palette of the console.
-			This is a 16-member array composed of values
-			ranging from 0-255.
-
-	vt.default_red=	[VT]
-			Format: <red0>,<red1>,<red2>,...,<red15>
-			Change the default red palette of the console.
-			This is a 16-member array composed of values
-			ranging from 0-255.
-
-	vt.default_utf8=
-			[VT]
-			Format=<0|1>
-			Set system-wide default UTF-8 mode for all tty's.
-			Default is 1, i.e. UTF-8 mode is enabled for all
-			newly opened terminals.
+	default_hugepagesz=
+			[same as hugepagesz=] The size of the default
+			HugeTLB page size. This is the size represented by
+			the legacy /proc/ hugepages APIs, used for SHM, and
+			default size when mounting hugetlbfs filesystems.
+			Defaults to the default architecture's huge page size
+			if not specified.
 
 	dhash_entries=	[KNL]
 			Set number of hash buckets for dentry cache.
@@ -646,27 +582,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			Documentation/serial/digiepca.txt.
 
 	disable_mtrr_cleanup [X86]
-	enable_mtrr_cleanup [X86]
 			The kernel tries to adjust MTRR layout from continuous
 			to discrete, to make X server driver able to add WB
-			entry later. This parameter enables/disables that.
-
-	mtrr_chunk_size=nn[KMG] [X86]
-			used for mtrr cleanup. It is largest continous chunk
-			that could hold holes aka. UC entries.
-
-	mtrr_gran_size=nn[KMG] [X86]
-			Used for mtrr cleanup. It is granularity of mtrr block.
-			Default is 1.
-			Large value could prevent small alignment from
-			using up MTRRs.
-
-	mtrr_spare_reg_nr=n [X86]
-			Format: <integer>
-			Range: 0,7 : spare reg number
-			Default : 1
-			Used for mtrr cleanup. It is spare mtrr entries number.
-			Set to 2 or more if your graphical card needs more.
+			entry later. This parameter disables that.
 
 	disable_mtrr_trim [X86, Intel and AMD only]
 			By default the kernel will trim any uncacheable
@@ -674,12 +592,38 @@ and is between 256 and 4096 characters. It is defined in the file
 			MTRR settings.  This parameter disables that behavior,
 			possibly causing your machine to run very slowly.
 
+	disable_timer_pin_1 [i386,x86-64]
+			Disable PIN 1 of APIC timer
+			Can be useful to work around chipset bugs.
+
 	dmasound=	[HW,OSS] Sound subsystem buffers
 
+	dma_debug=off	If the kernel is compiled with DMA_API_DEBUG support,
+			this option disables the debugging code at boot.
+
+	dma_debug_entries=<number>
+			This option allows to tune the number of preallocated
+			entries for DMA-API debugging code. One entry is
+			required per DMA-API allocation. Use this if the
+			DMA-API debugging code disables itself because the
+			architectural default is too low.
+
 	dscc4.setup=	[NET]
 
 	dtc3181e=	[HW,SCSI]
 
+	dynamic_printk	Enables pr_debug()/dev_dbg() calls if
+			CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled.
+			These can also be switched on/off via
+			<debugfs>/dynamic_printk/modules
+
+	earlycon=	[KNL] Output early console device and options.
+		uart[8250],io,<addr>[,options]
+		uart[8250],mmio,<addr>[,options]
+			Start an early, polled-mode console on the 8250/16550
+			UART at the specified I/O port or MMIO address.
+			The options are the same as for ttyS, above.
+
 	earlyprintk=	[X86-32,X86-64,SH,BLACKFIN]
 			earlyprintk=vga
 			earlyprintk=serial[,ttySn[,baudrate]]
@@ -721,6 +665,17 @@ and is between 256 and 4096 characters. It is defined in the file
 			pass this option to capture kernel.
 			See Documentation/kdump/kdump.txt for details.
 
+	enable_mtrr_cleanup [X86]
+			The kernel tries to adjust MTRR layout from continuous
+			to discrete, to make X server driver able to add WB
+			entry later. This parameter enables that.
+
+	enable_timer_pin_1 [i386,x86-64]
+			Enable PIN 1 of APIC timer
+			Can be useful to work around chipset bugs
+			(in particular on some ATI chipsets).
+			The kernel tries to set a reasonable default.
+
 	enforcing	[SELINUX] Set initial enforcing status.
 			Format: {"0" | "1"}
 			See security/selinux/Kconfig help text.
@@ -808,6 +763,16 @@ and is between 256 and 4096 characters. It is defined in the file
 	hisax=		[HW,ISDN]
 			See Documentation/isdn/README.HiSax.
 
+	hlt		[BUGS=ARM,SH]
+
+	hpet=		[X86-32,HPET] option to control HPET usage
+			Format: { enable (default) | disable | force |
+				verbose }
+			disable: disable HPET and use PIT instead
+			force: allow force enabled of undocumented chips (ICH4,
+				VIA, nVidia)
+			verbose: show contents of HPET registers during setup
+
 	hugepages=	[HW,X86-32,IA-64] HugeTLB pages to allocate at boot.
 	hugepagesz=	[HW,IA-64,PPC,X86-64] The size of the HugeTLB pages.
 			On x86-64 and powerpc, this option can be specified
@@ -817,18 +782,18 @@ and is between 256 and 4096 characters. It is defined in the file
 			(when the CPU supports the "pdpe1gb" cpuinfo flag)
 			Note that 1GB pages can only be allocated at boot time
 			using hugepages= and not freed afterwards.
-	default_hugepagesz=
-			[same as hugepagesz=] The size of the default
-			HugeTLB page size. This is the size represented by
-			the legacy /proc/ hugepages APIs, used for SHM, and
-			default size when mounting hugetlbfs filesystems.
-			Defaults to the default architecture's huge page size
-			if not specified.
-
-	hlt		[BUGS=ARM,SH]
 
 	hvc_iucv=	[S390] Number of z/VM IUCV hypervisor console (HVC)
 			       terminal devices. Valid values: 0..8
+	hvc_iucv_allow=	[S390] Comma-separated list of z/VM user IDs.
+			       If specified, z/VM IUCV HVC accepts connections
+			       from listed z/VM user IDs only.
+
+	i2c_bus=	[HW] Override the default board specific I2C bus speed
+			     or register an additional I2C bus that is not
+			     registered from board initialization code.
+			     Format:
+			     <bus_id>,<clkrate>
 
 	i8042.debug	[HW] Toggle i8042 debug mode
 	i8042.direct	[HW] Put keyboard port into non-translated mode
@@ -868,13 +833,18 @@ and is between 256 and 4096 characters. It is defined in the file
 	icn=		[HW,ISDN]
 			Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
 
-	ide=		[HW] (E)IDE subsystem
-			Format: ide=nodma or ide=doubler
+	ide-core.nodma=	[HW] (E)IDE subsystem
+			Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
+			.vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom
+			.chs .ignore_cable are additional options
 			See Documentation/ide/ide.txt.
 
 	idebus=		[HW] (E)IDE subsystem - VLB/PCI bus speed
 			See Documentation/ide/ide.txt.
 
+	ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
+			Claim all unknown PCI IDE storage controllers.
+
 	idle=		[X86]
 			Format: idle=poll, idle=mwait, idle=halt, idle=nomwait
 			Poll forces a polling idle loop that can slightly
@@ -890,9 +860,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			In such case C2/C3 won't be used again.
 			idle=nomwait: Disable mwait for CPU C-states
 
-	ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
-			Claim all unknown PCI IDE storage controllers.
-
 	ignore_loglevel	[KNL]
 			Ignore loglevel setting - this will print /all/
 			kernel messages to the console. Useful for debugging.
@@ -900,6 +867,15 @@ and is between 256 and 4096 characters. It is defined in the file
 	ihash_entries=	[KNL]
 			Set number of hash buckets for inode cache.
 
+	ima_audit=	[IMA]
+			Format: { "0" | "1" }
+			0 -- integrity auditing messages. (Default)
+			1 -- enable informational integrity auditing messages.
+
+	ima_hash=	[IMA]
+			Formt: { "sha1" | "md5" }
+			default: "sha1"
+
 	in2000=		[HW,SCSI]
 			See header of drivers/scsi/in2000.c.
 
@@ -917,26 +893,9 @@ and is between 256 and 4096 characters. It is defined in the file
 	inport.irq=	[HW] Inport (ATI XL and Microsoft) busmouse driver
 			Format: <irq>
 
-	inttest=	[IA64]
-
-	iomem=		Disable strict checking of access to MMIO memory
-		strict	regions from userspace.
-		relaxed
-
-	iommu=		[x86]
-		off
-		force
-		noforce
-		biomerge
-		panic
-		nopanic
-		merge
-		nomerge
-		forcesac
-		soft
-
-
 	intel_iommu=	[DMAR] Intel IOMMU driver (DMAR) option
+		on
+			Enable intel iommu driver.
 		off
 			Disable intel iommu driver.
 		igfx_off [Default Off]
@@ -957,6 +916,28 @@ and is between 256 and 4096 characters. It is defined in the file
 			result in a hardware IOTLB flush operation as opposed
 			to batching them for performance.
 
+	inttest=	[IA64]
+
+	iomem=		Disable strict checking of access to MMIO memory
+		strict	regions from userspace.
+		relaxed
+
+	iommu=		[x86]
+		off
+		force
+		noforce
+		biomerge
+		panic
+		nopanic
+		merge
+		nomerge
+		forcesac
+		soft
+
+	io7=		[HW] IO7 for Marvel based alpha systems
+			See comment before marvel_specify_io7 in
+			arch/alpha/kernel/core_marvel.c.
+
 	io_delay=	[X86-32,X86-64] I/O delay method
 		0x80
 			Standard port 0x80 based delay
@@ -967,10 +948,6 @@ and is between 256 and 4096 characters. It is defined in the file
 		none
 			No delay
 
-	io7=		[HW] IO7 for Marvel based alpha systems
-			See comment before marvel_specify_io7 in
-			arch/alpha/kernel/core_marvel.c.
-
 	ip=		[IP_PNP]
 			See Documentation/filesystems/nfsroot.txt.
 
@@ -981,12 +958,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	ips=		[HW,SCSI] Adaptec / IBM ServeRAID controller
 			See header of drivers/scsi/ips.c.
 
-	ports=		[IP_VS_FTP] IPVS ftp helper module
-			Default is 21.
-			Up to 8 (IP_VS_APP_MAX_PORTS) ports
-			may be specified.
-			Format: <port>,<port>....
-
 	irqfixup	[HW]
 			When an interrupt is not handled search all handlers
 			for it. Intended to get systems with badly broken
@@ -1027,6 +998,8 @@ and is between 256 and 4096 characters. It is defined in the file
 	js=		[HW,JOY] Analog joystick
 			See Documentation/input/joystick.txt.
 
+	keepinitrd	[HW,ARM]
+
 	kernelcore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter
 			specifies the amount of memory usable by the kernel
 			for non-movable allocations.  The requested amount is
@@ -1043,20 +1016,14 @@ and is between 256 and 4096 characters. It is defined in the file
 			use the HighMem zone if it exists, and the Normal
 			zone if it does not.
 
-	movablecore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter
-			is similar to kernelcore except it specifies the
-			amount of memory used for migratable allocations.
-			If both kernelcore and movablecore is specified,
-			then kernelcore will be at *least* the specified
-			value but may be more. If movablecore on its own
-			is specified, the administrator must be careful
-			that the amount of memory usable for all allocations
-			is not too small.
+	kmemtrace.enable=	[KNL,KMEMTRACE] Format: { yes | no }
+				Controls whether kmemtrace is enabled
+				at boot-time.
 
-	keepinitrd	[HW,ARM]
-
-	kstack=N	[X86-32,X86-64] Print N words from the kernel stack
-			in oops dumps.
+	kmemtrace.subbufs=n	[KNL,KMEMTRACE] Overrides the number of
+			subbufs kmemtrace's relay channel has. Set this
+			higher than default (KMEMTRACE_N_SUBBUFS in code) if
+			you experience buffer overruns.
 
 	kgdboc=		[HW] kgdb over consoles.
 			Requires a tty driver that supports console polling.
@@ -1067,6 +1034,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			Configure the RouterBoard 532 series on-chip
 			Ethernet adapter MAC address.
 
+	kstack=N	[X86-32,X86-64] Print N words from the kernel stack
+			in oops dumps.
+
 	l2cr=		[PPC]
 
 	l3cr=		[PPC]
@@ -1212,9 +1182,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			(machvec) in a generic kernel.
 			Example: machvec=hpzx1_swiotlb
 
-	max_loop=	[LOOP] Maximum number of loopback devices that can
-			be mounted
-			Format: <1-256>
+	max_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory greater
+			than or equal to this physical address is ignored.
 
 	maxcpus=	[SMP] Maximum number of processors that	an SMP kernel
 			should make use of.  maxcpus=n : n >= 0 limits the
@@ -1222,8 +1191,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			it is equivalent to "nosmp", which also disables
 			the IO APIC.
 
-	max_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory greater than
-			or equal to this physical address is ignored.
+	max_loop=	[LOOP] Maximum number of loopback devices that can
+			be mounted
+			Format: <1-256>
 
 	max_luns=	[SCSI] Maximum number of LUNs to probe.
 			Should be between 1 and 2^32-1.
@@ -1306,8 +1276,13 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	memtest=	[KNL,X86] Enable memtest
 			Format: <integer>
-			range: 0,4 : pattern number
 			default : 0 <disable>
+			Specifies the number of memtest passes to be
+			performed. Each pass selects another test
+			pattern from a given set of patterns. Memtest
+			fills the memory with this pattern, validates
+			memory contents and reserves bad memory
+			regions that are detected.
 
 	meye.*=		[HW] Set MotionEye Camera parameters
 			See Documentation/video4linux/meye.txt.
@@ -1345,6 +1320,16 @@ and is between 256 and 4096 characters. It is defined in the file
 	mousedev.yres=	[MOUSE] Vertical screen resolution, used for devices
 			reporting absolute coordinates, such as tablets
 
+	movablecore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter
+			is similar to kernelcore except it specifies the
+			amount of memory used for migratable allocations.
+			If both kernelcore and movablecore is specified,
+			then kernelcore will be at *least* the specified
+			value but may be more. If movablecore on its own
+			is specified, the administrator must be careful
+			that the amount of memory usable for all allocations
+			is not too small.
+
 	mpu401=		[HW,OSS]
 			Format: <io>,<irq>
 
@@ -1366,6 +1351,23 @@ and is between 256 and 4096 characters. It is defined in the file
 			[HW] Make the MicroTouch USB driver use raw coordinates
 			('y', default) or cooked coordinates ('n')
 
+	mtrr_chunk_size=nn[KMG] [X86]
+			used for mtrr cleanup. It is largest continous chunk
+			that could hold holes aka. UC entries.
+
+	mtrr_gran_size=nn[KMG] [X86]
+			Used for mtrr cleanup. It is granularity of mtrr block.
+			Default is 1.
+			Large value could prevent small alignment from
+			using up MTRRs.
+
+	mtrr_spare_reg_nr=n [X86]
+			Format: <integer>
+			Range: 0,7 : spare reg number
+			Default : 1
+			Used for mtrr cleanup. It is spare mtrr entries number.
+			Set to 2 or more if your graphical card needs more.
+
 	n2=		[NET] SDL Inc. RISCom/N2 synchronous serial card
 
 	NCR_D700=	[HW,SCSI]
@@ -1426,11 +1428,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			0 - turn nmi_watchdog off
 			1 - use the IO-APIC timer for the NMI watchdog
 			2 - use the local APIC for the NMI watchdog using
-			a performance counter. Note: This will use one performance
-			counter and the local APIC's performance vector.
-			When panic is specified panic when an NMI watchdog timeout occurs.
-			This is useful when you use a panic=... timeout and need the box
-			quickly up again.
+			a performance counter. Note: This will use one
+			performance counter and the local APIC's performance
+			vector.
+			When panic is specified, panic when an NMI watchdog
+			timeout occurs.
+			This is useful when you use a panic=... timeout and
+			need the box quickly up again.
 			Instead of 1 and 2 it is possible to use the following
 			symbolic names: lapic and ioapic
 			Example: nmi_watchdog=2 or nmi_watchdog=panic,lapic
@@ -1439,6 +1443,16 @@ and is between 256 and 4096 characters. It is defined in the file
 			emulation library even if a 387 maths coprocessor
 			is present.
 
+	no_console_suspend
+			[HW] Never suspend the console
+			Disable suspending of consoles during suspend and
+			hibernate operations.  Once disabled, debugging
+			messages can reach various consoles while the rest
+			of the system is being put to sleep (ie, while
+			debugging driver suspend/resume hooks).  This may
+			not work reliably with all consoles, but is known
+			to work with serial and VGA consoles.
+
 	noaliencache	[MM, NUMA, SLAB] Disables the allocation of alien
 			caches in the slab allocator.  Saves per-node memory,
 			but will impact performance.
@@ -1453,6 +1467,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nocache		[ARM]
 
+	noclflush	[BUGS=X86] Don't use the CLFLUSH instruction
+
 	nodelayacct	[KNL] Disable per-task delay accounting
 
 	nodisconnect	[HW,SCSI,M68K] Disables SCSI disconnects.
@@ -1481,9 +1497,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			register save and restore. The kernel will only save
 			legacy floating-point registers on task switch.
 
-	noclflush	[BUGS=X86] Don't use the CLFLUSH instruction
-
-	nohlt		[BUGS=ARM,SH]
+	nohlt		[BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
+			wfi(ARM) instruction doesn't work correctly and not to
+			use it. This is also useful when using JTAG debugger.
 
 	no-hlt		[BUGS=X86-32] Tells the kernel that the hlt
 			instruction doesn't work correctly and not to
@@ -1504,6 +1520,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			Valid arguments: on, off
 			Default: on
 
+	noiotrap	[SH] Disables trapped I/O port accesses.
+
 	noirqdebug	[X86-32] Disables the code which attempts to detect and
 			disable unhandled interrupt sources.
 
@@ -1523,12 +1541,6 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nolapic_timer	[X86-32,APIC] Do not use the local APIC timer.
 
-	nox2apic	[X86-64,APIC] Do not enable x2APIC mode.
-
-	x2apic_phys	[X86-64,APIC] Use x2apic physical mode instead of
-			default x2apic cluster mode on platforms
-			supporting x2apic.
-
 	noltlbs		[PPC] Do not use large page/tlb entries for kernel
 			lowmem mapping on PPC40x.
 
@@ -1539,6 +1551,9 @@ and is between 256 and 4096 characters. It is defined in the file
 	nomfgpt		[X86-32] Disable Multi-Function General Purpose
 			Timer usage (for AMD Geode machines).
 
+	norandmaps	Don't use address space randomization.  Equivalent to
+			echo 0 > /proc/sys/kernel/randomize_va_space
+
 	noreplace-paravirt	[X86-32,PV_OPS] Don't patch paravirt_ops
 
 	noreplace-smp	[X86-32,SMP] Don't replace SMP instructions
@@ -1563,7 +1578,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	nosoftlockup	[KNL] Disable the soft-lockup detector.
 
 	noswapaccount	[KNL] Disable accounting of swap in memory resource
-			controller. (See Documentation/controllers/memory.txt)
+			controller. (See Documentation/cgroups/memory.txt)
 
 	nosync		[HW,M68K] Disables sync negotiation for all devices.
 
@@ -1577,13 +1592,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			purges which is reported from either PAL_VM_SUMMARY or
 			SAL PALO.
 
+	nr_uarts=	[SERIAL] maximum number of UARTs to be registered.
+
 	numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA.
 			one of ['zone', 'node', 'default'] can be specified
 			This can be set from sysctl after boot.
 			See Documentation/sysctl/vm.txt for details.
 
-	nr_uarts=	[SERIAL] maximum number of UARTs to be registered.
-
 	ohci1394_dma=early	[HW] enable debugging via the ohci1394 driver.
 			See Documentation/debugging-via-ohci1394.txt for more
 			info.
@@ -1655,6 +1670,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			See also Documentation/blockdev/paride.txt.
 
 	pci=option[,option...]	[PCI] various PCI subsystem options:
+		earlydump	[X86] dump PCI config space before the kernel
+			        changes anything
 		off		[X86] don't probe for the PCI bus
 		bios		[X86-32] force use of PCI BIOS, don't access
 				the hardware directly. Use this if your machine
@@ -1754,6 +1771,15 @@ and is between 256 and 4096 characters. It is defined in the file
 		cbmemsize=nn[KMG]	The fixed amount of bus space which is
 				reserved for the CardBus bridge's memory
 				window. The default value is 64 megabytes.
+		resource_alignment=
+				Format:
+				[<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...]
+				Specifies alignment and device to reassign
+				aligned memory resources.
+				If <order of align> is not specified,
+				PAGE_SIZE is used as alignment.
+				PCI-PCI bridge can be specified, if resource
+				windows need to be expanded.
 
 	pcie_aspm=	[PCIE] Forcibly enable or disable PCIe Active State Power
 			Management.
@@ -1812,11 +1838,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			autoconfiguration.
 			Ranges are in pairs (memory base and size).
 
-	dynamic_printk	Enables pr_debug()/dev_dbg() calls if
-			CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled.
-			These can also be switched on/off via
-			<debugfs>/dynamic_printk/modules
-
 	print-fatal-signals=
 			[KNL] debug: print fatal signals
 			print-fatal-signals=1: print segfault info to
@@ -1826,6 +1847,14 @@ and is between 256 and 4096 characters. It is defined in the file
 	printk.time=	Show timing data prefixed to each printk message line
 			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
 
+	processor.max_cstate=	[HW,ACPI]
+			Limit processor to maximum C-state
+			max_cstate=9 overrides any DMI blacklist limit.
+
+	processor.nocst	[HW,ACPI]
+			Ignore the _CST method to determine C-states,
+			instead using the legacy FADT method
+
 	profile=	[KNL] Enable kernel profiling via /proc/profile
 			Format: [schedule,]<number>
 			Param: "schedule" - profile schedule points.
@@ -1835,14 +1864,6 @@ and is between 256 and 4096 characters. It is defined in the file
 				Requires CONFIG_SCHEDSTATS
 			Param: "kvm" - profile VM exits.
 
-	processor.max_cstate=	[HW,ACPI]
-			Limit processor to maximum C-state
-			max_cstate=9 overrides any DMI blacklist limit.
-
-	processor.nocst	[HW,ACPI]
-			Ignore the _CST method to determine C-states,
-			instead using the legacy FADT method
-
 	prompt_ramdisk=	[RAM] List of RAM disks to prompt for floppy disk
 			before loading.
 			See Documentation/blockdev/ramdisk.txt.
@@ -1907,7 +1928,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	relax_domain_level=
 			[KNL, SMP] Set scheduler's default relax_domain_level.
-			See Documentation/cpusets.txt.
+			See Documentation/cgroups/cpusets.txt.
 
 	reserve=	[KNL,BUGS] Force the kernel to ignore some iomem area
 
@@ -1996,7 +2017,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			allowing boot to proceed.  none ignores them, expecting
 			user space to do the scan.
 
-	selinux		[SELINUX] Disable or enable SELinux at boot time.
+	security=	[SECURITY] Choose a security module to enable at boot.
+			If this boot parameter is not specified, only the first
+			security module asking for security registration will be
+			loaded. An invalid security module name will be treated
+			as if no module has been chosen.
+
+	selinux=	[SELINUX] Disable or enable SELinux at boot time.
 			Format: { "0" | "1" }
 			See security/selinux/Kconfig help text.
 			0 -- disable.
@@ -2005,15 +2032,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			If enabled at boot time, /selinux/disable can be used
 			later to disable prior to initial policy load.
 
-	selinux_compat_net =
-			[SELINUX] Set initial selinux_compat_net flag value.
-                        Format: { "0" | "1" }
-                        0 -- use new secmark-based packet controls
-                        1 -- use legacy packet controls
-                        Default value is 0 (preferred).
-                        Value can be changed at runtime via
-                        /selinux/compat_net.
-
 	serialnumber	[BUGS=X86-32]
 
 	shapers=	[NET]
@@ -2325,6 +2343,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	tp720=		[HW,PS2]
 
+	trace_buf_size=nn[KMG] [ftrace] will set tracing buffer size.
+
 	trix=		[HW,OSS] MediaTrix AudioTrix Pro
 			Format:
 			<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
@@ -2427,9 +2447,6 @@ and is between 256 and 4096 characters. It is defined in the file
 					medium is write-protected).
 			Example: quirks=0419:aaf5:rl,0421:0433:rc
 
-	add_efi_memmap	[EFI; x86-32,X86-64] Include EFI memory map in
-			kernel's map of available physical RAM.
-
 	vdso=		[X86-32,SH,x86-64]
 			vdso=2: enable compat VDSO (default with COMPAT_VDSO)
 			vdso=1: enable VDSO (default)
@@ -2447,7 +2464,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See Documentation/fb/modedb.txt.
 
 	vga=		[BOOT,X86-32] Select a particular video mode
-			See Documentation/x86/i386/boot.txt and
+			See Documentation/x86/boot.txt and
 			Documentation/svga.txt.
 			Use vga=ask for menu.
 			This is actually a boot loader parameter; the value is
@@ -2468,6 +2485,31 @@ and is between 256 and 4096 characters. It is defined in the file
 	vmpoff=		[KNL,S390] Perform z/VM CP command after power off.
 			Format: <command>
 
+	vt.default_blu=	[VT]
+			Format: <blue0>,<blue1>,<blue2>,...,<blue15>
+			Change the default blue palette of the console.
+			This is a 16-member array composed of values
+			ranging from 0-255.
+
+	vt.default_grn=	[VT]
+			Format: <green0>,<green1>,<green2>,...,<green15>
+			Change the default green palette of the console.
+			This is a 16-member array composed of values
+			ranging from 0-255.
+
+	vt.default_red=	[VT]
+			Format: <red0>,<red1>,<red2>,...,<red15>
+			Change the default red palette of the console.
+			This is a 16-member array composed of values
+			ranging from 0-255.
+
+	vt.default_utf8=
+			[VT]
+			Format=<0|1>
+			Set system-wide default UTF-8 mode for all tty's.
+			Default is 1, i.e. UTF-8 mode is enabled for all
+			newly opened terminals.
+
 	waveartist=	[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>
 
@@ -2480,6 +2522,10 @@ and is between 256 and 4096 characters. It is defined in the file
 	wdt=		[WDT] Watchdog
 			See Documentation/watchdog/wdt.txt.
 
+	x2apic_phys	[X86-64,APIC] Use x2apic physical mode instead of
+			default x2apic cluster mode on platforms
+			supporting x2apic.
+
 	xd=		[HW,XT] Original XT pre-IDE (RLL encoded) disks.
 	xd_geo=		See header of drivers/block/xd.c.
 
@@ -2487,9 +2533,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
 
-	norandmaps	Don't use address space randomization.  Equivalent to
-			echo 0 > /proc/sys/kernel/randomize_va_space
-
 ______________________________________________________________________
 
 TODO:
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 48b3de90eb1..1e7a769a10f 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -212,7 +212,9 @@ hit, Kprobes calls kp->pre_handler.  After the probed instruction
 is single-stepped, Kprobe calls kp->post_handler.  If a fault
 occurs during execution of kp->pre_handler or kp->post_handler,
 or during single-stepping of the probed instruction, Kprobes calls
-kp->fault_handler.  Any or all handlers can be NULL.
+kp->fault_handler.  Any or all handlers can be NULL. If kp->flags
+is set KPROBE_FLAG_DISABLED, that kp will be registered but disabled,
+so, it's handlers aren't hit until calling enable_kprobe(kp).
 
 NOTE:
 1. With the introduction of the "symbol_name" field to struct kprobe,
@@ -363,6 +365,26 @@ probes) in the specified array, they clear the addr field of those
 incorrect probes. However, other probes in the array are
 unregistered correctly.
 
+4.7 disable_*probe
+
+#include <linux/kprobes.h>
+int disable_kprobe(struct kprobe *kp);
+int disable_kretprobe(struct kretprobe *rp);
+int disable_jprobe(struct jprobe *jp);
+
+Temporarily disables the specified *probe. You can enable it again by using
+enable_*probe(). You must specify the probe which has been registered.
+
+4.8 enable_*probe
+
+#include <linux/kprobes.h>
+int enable_kprobe(struct kprobe *kp);
+int enable_kretprobe(struct kretprobe *rp);
+int enable_jprobe(struct jprobe *jp);
+
+Enables *probe which has been disabled by disable_*probe(). You must specify
+the probe which has been registered.
+
 5. Kprobes Features and Limitations
 
 Kprobes allows multiple probes at the same address.  Currently,
@@ -500,10 +522,14 @@ the probe. If the probed function belongs to a module, the module name
 is also specified. Following columns show probe status. If the probe is on
 a virtual address that is no longer valid (module init sections, module
 virtual addresses that correspond to modules that've been unloaded),
-such probes are marked with [GONE].
+such probes are marked with [GONE]. If the probe is temporarily disabled,
+such probes are marked with [DISABLED].
 
-/debug/kprobes/enabled: Turn kprobes ON/OFF
+/debug/kprobes/enabled: Turn kprobes ON/OFF forcibly.
 
-Provides a knob to globally turn registered kprobes ON or OFF. By default,
-all kprobes are enabled. By echoing "0" to this file, all registered probes
-will be disarmed, till such time a "1" is echoed to this file.
+Provides a knob to globally and forcibly turn registered kprobes ON or OFF.
+By default, all kprobes are enabled. By echoing "0" to this file, all
+registered probes will be disarmed, till such time a "1" is echoed to this
+file. Note that this knob just disarms and arms all kprobes and doesn't
+change each probe's disabling state. This means that disabled kprobes (marked
+[DISABLED]) will be not enabled if you turn ON all kprobes by this knob.
diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt
index 2b3a6b5260b..5ee2a02b3b4 100644
--- a/Documentation/laptops/acer-wmi.txt
+++ b/Documentation/laptops/acer-wmi.txt
@@ -1,9 +1,9 @@
 Acer Laptop WMI Extras Driver
 http://code.google.com/p/aceracpi
-Version 0.2
-18th August 2008
+Version 0.3
+4th April 2009
 
-Copyright 2007-2008 Carlos Corbacho <carlos@strangeworlds.co.uk>
+Copyright 2007-2009 Carlos Corbacho <carlos@strangeworlds.co.uk>
 
 acer-wmi is a driver to allow you to control various parts of your Acer laptop
 hardware under Linux which are exposed via ACPI-WMI.
@@ -36,6 +36,10 @@ not possible in kernel space from a 64 bit OS.
 Supported Hardware
 ******************
 
+NOTE: The Acer Aspire One is not supported hardware. It cannot work with
+acer-wmi until Acer fix their ACPI-WMI implementation on them, so has been
+blacklisted until that happens.
+
 Please see the website for the current list of known working hardare:
 
 http://code.google.com/p/aceracpi/wiki/SupportedHardware
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 41bc99fa188..3d7650768bb 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -20,7 +20,8 @@ moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel
 kernel 2.6.29 and release 0.22.
 
 The driver is named "thinkpad-acpi".  In some places, like module
-names, "thinkpad_acpi" is used because of userspace issues.
+names and log messages, "thinkpad_acpi" is used because of userspace
+issues.
 
 "tpacpi" is used as a shorthand where "thinkpad-acpi" would be too
 long due to length limitations on some Linux kernel versions.
@@ -37,7 +38,7 @@ detailed description):
 	- ThinkLight on and off
 	- limited docking and undocking
 	- UltraBay eject
-	- CMOS control
+	- CMOS/UCMS control
 	- LED control
 	- ACPI sounds
 	- temperature sensors
@@ -46,6 +47,7 @@ detailed description):
 	- Volume control
 	- Fan control and monitoring: fan speed, fan enable/disable
 	- WAN enable and disable
+	- UWB enable and disable
 
 A compatibility table by model and feature is maintained on the web
 site, http://ibm-acpi.sf.net/. I appreciate any success or failure
@@ -53,7 +55,7 @@ reports, especially if they add to or correct the compatibility table.
 Please include the following information in your report:
 
 	- ThinkPad model name
-	- a copy of your DSDT, from /proc/acpi/dsdt
+	- a copy of your ACPI tables, using the "acpidump" utility
 	- a copy of the output of dmidecode, with serial numbers
 	  and UUIDs masked off
 	- which driver features work and which don't
@@ -66,17 +68,18 @@ Installation
 ------------
 
 If you are compiling this driver as included in the Linux kernel
-sources, simply enable the CONFIG_THINKPAD_ACPI option, and optionally
-enable the CONFIG_THINKPAD_ACPI_BAY option if you want the
-thinkpad-specific bay functionality.
+sources, look for the CONFIG_THINKPAD_ACPI Kconfig option.
+It is located on the menu path: "Device Drivers" -> "X86 Platform
+Specific Device Drivers" -> "ThinkPad ACPI Laptop Extras".
+
 
 Features
 --------
 
 The driver exports two different interfaces to userspace, which can be
 used to access the features it provides.  One is a legacy procfs-based
-interface, which will be removed at some time in the distant future.
-The other is a new sysfs-based interface which is not complete yet.
+interface, which will be removed at some time in the future.  The other
+is a new sysfs-based interface which is not complete yet.
 
 The procfs interface creates the /proc/acpi/ibm directory.  There is a
 file under that directory for each feature it supports.  The procfs
@@ -111,15 +114,17 @@ The version of thinkpad-acpi's sysfs interface is exported by the driver
 as a driver attribute (see below).
 
 Sysfs driver attributes are on the driver's sysfs attribute space,
-for 2.6.23 this is /sys/bus/platform/drivers/thinkpad_acpi/ and
+for 2.6.23+ this is /sys/bus/platform/drivers/thinkpad_acpi/ and
 /sys/bus/platform/drivers/thinkpad_hwmon/
 
 Sysfs device attributes are on the thinkpad_acpi device sysfs attribute
-space, for 2.6.23 this is /sys/devices/platform/thinkpad_acpi/.
+space, for 2.6.23+ this is /sys/devices/platform/thinkpad_acpi/.
 
 Sysfs device attributes for the sensors and fan are on the
 thinkpad_hwmon device's sysfs attribute space, but you should locate it
-looking for a hwmon device with the name attribute of "thinkpad".
+looking for a hwmon device with the name attribute of "thinkpad", or
+better yet, through libsensors.
+
 
 Driver version
 --------------
@@ -129,6 +134,7 @@ sysfs driver attribute: version
 
 The driver name and version. No commands can be written to this file.
 
+
 Sysfs interface version
 -----------------------
 
@@ -160,6 +166,7 @@ expect that an attribute might not be there, and deal with it properly
 (an attribute not being there *is* a valid way to make it clear that a
 feature is not available in sysfs).
 
+
 Hot keys
 --------
 
@@ -172,17 +179,14 @@ system.  Enabling the hotkey functionality of thinkpad-acpi signals the
 firmware that such a driver is present, and modifies how the ThinkPad
 firmware will behave in many situations.
 
-The driver enables the hot key feature automatically when loaded.  The
-feature can later be disabled and enabled back at runtime.  The driver
-will also restore the hot key feature to its previous state and mask
-when it is unloaded.
+The driver enables the HKEY ("hot key") event reporting automatically
+when loaded, and disables it when it is removed.
 
-When the hotkey feature is enabled and the hot key mask is set (see
-below), the driver will report HKEY events in the following format:
+The driver will report HKEY events in the following format:
 
 	ibm/hotkey HKEY 00000080 0000xxxx
 
-Some of these events refer to hot key presses, but not all.
+Some of these events refer to hot key presses, but not all of them.
 
 The driver will generate events over the input layer for hot keys and
 radio switches, and over the ACPI netlink layer for other events.  The
@@ -214,13 +218,17 @@ procfs notes:
 
 The following commands can be written to the /proc/acpi/ibm/hotkey file:
 
-	echo enable > /proc/acpi/ibm/hotkey -- enable the hot keys feature
-	echo disable > /proc/acpi/ibm/hotkey -- disable the hot keys feature
 	echo 0xffffffff > /proc/acpi/ibm/hotkey -- enable all hot keys
 	echo 0 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
 	... any other 8-hex-digit mask ...
 	echo reset > /proc/acpi/ibm/hotkey -- restore the original mask
 
+The following commands have been deprecated and will cause the kernel
+to log a warning:
+
+	echo enable > /proc/acpi/ibm/hotkey -- does nothing
+	echo disable > /proc/acpi/ibm/hotkey -- returns an error
+
 The procfs interface does not support NVRAM polling control.  So as to
 maintain maximum bug-to-bug compatibility, it does not report any masks,
 nor does it allow one to manipulate the hot key mask when the firmware
@@ -229,12 +237,9 @@ does not support masks at all, even if NVRAM polling is in use.
 sysfs notes:
 
 	hotkey_bios_enabled:
-		Returns the status of the hot keys feature when
-		thinkpad-acpi was loaded.  Upon module unload, the hot
-		key feature status will be restored to this value.
+		DEPRECATED, WILL BE REMOVED SOON.
 
-		0: hot keys were disabled
-		1: hot keys were enabled (unusual)
+		Returns 0.
 
 	hotkey_bios_mask:
 		Returns the hot keys mask when thinkpad-acpi was loaded.
@@ -242,13 +247,10 @@ sysfs notes:
 		to this value.
 
 	hotkey_enable:
-		Enables/disables the hot keys feature in the ACPI
-		firmware, and reports current status of the hot keys
-		feature.  Has no effect on the NVRAM hot key polling
-		functionality.
+		DEPRECATED, WILL BE REMOVED SOON.
 
-		0: disables the hot keys feature / feature disabled
-		1: enables the hot keys feature / feature enabled
+		0: returns -EPERM
+		1: does nothing
 
 	hotkey_mask:
 		bit mask to enable driver-handling (and depending on
@@ -618,6 +620,7 @@ For Lenovo models *with* ACPI backlight control:
    and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN.  Process
    these keys on userspace somehow (e.g. by calling xbacklight).
 
+
 Bluetooth
 ---------
 
@@ -628,6 +631,9 @@ sysfs rfkill class: switch "tpacpi_bluetooth_sw"
 This feature shows the presence and current state of a ThinkPad
 Bluetooth device in the internal ThinkPad CDC slot.
 
+If the ThinkPad supports it, the Bluetooth state is stored in NVRAM,
+so it is kept across reboots and power-off.
+
 Procfs notes:
 
 If Bluetooth is installed, the following commands can be used:
@@ -652,6 +658,7 @@ Sysfs notes:
 	rfkill controller switch "tpacpi_bluetooth_sw": refer to
 	Documentation/rfkill.txt for details.
 
+
 Video output control -- /proc/acpi/ibm/video
 --------------------------------------------
 
@@ -693,11 +700,8 @@ Fn-F7 from working. This also disables the video output switching
 features of this driver, as it uses the same ACPI methods as
 Fn-F7. Video switching on the console should still work.
 
-UPDATE: There's now a patch for the X.org Radeon driver which
-addresses this issue. Some people are reporting success with the patch
-while others are still having problems. For more information:
+UPDATE: refer to https://bugs.freedesktop.org/show_bug.cgi?id=2000
 
-https://bugs.freedesktop.org/show_bug.cgi?id=2000
 
 ThinkLight control
 ------------------
@@ -720,10 +724,11 @@ The ThinkLight sysfs interface is documented by the LED class
 documentation, in Documentation/leds-class.txt.  The ThinkLight LED name
 is "tpacpi::thinklight".
 
-Due to limitations in the sysfs LED class, if the status of the thinklight
+Due to limitations in the sysfs LED class, if the status of the ThinkLight
 cannot be read or if it is unknown, thinkpad-acpi will report it as "off".
 It is impossible to know if the status returned through sysfs is valid.
 
+
 Docking / undocking -- /proc/acpi/ibm/dock
 ------------------------------------------
 
@@ -784,6 +789,7 @@ the only docking stations currently supported are the X-series
 UltraBase docks and "dumb" port replicators like the Mini Dock (the
 latter don't need any ACPI support, actually).
 
+
 UltraBay eject -- /proc/acpi/ibm/bay
 ------------------------------------
 
@@ -847,8 +853,9 @@ supported. Use "eject2" instead of "eject" for the second bay.
 Note: the UltraBay eject support on the 600e/x, A22p and A3x is
 EXPERIMENTAL and may not work as expected. USE WITH CAUTION!
 
-CMOS control
-------------
+
+CMOS/UCMS control
+-----------------
 
 procfs: /proc/acpi/ibm/cmos
 sysfs device attribute: cmos_command
@@ -882,6 +889,7 @@ The cmos command interface is prone to firmware split-brain problems, as
 in newer ThinkPads it is just a compatibility layer.  Do not use it, it is
 exported just as a debug tool.
 
+
 LED control
 -----------
 
@@ -893,6 +901,17 @@ some older ThinkPad models, it is possible to query the status of the
 LED indicators as well.  Newer ThinkPads cannot query the real status
 of the LED indicators.
 
+Because misuse of the LEDs could induce an unaware user to perform
+dangerous actions (like undocking or ejecting a bay device while the
+buses are still active), or mask an important alarm (such as a nearly
+empty battery, or a broken battery), access to most LEDs is
+restricted.
+
+Unrestricted access to all LEDs requires that thinkpad-acpi be
+compiled with the CONFIG_THINKPAD_ACPI_UNSAFE_LEDS option enabled.
+Distributions must never enable this option.  Individual users that
+are aware of the consequences are welcome to enabling it.
+
 procfs notes:
 
 The available commands are:
@@ -939,6 +958,7 @@ ThinkPad indicator LED should blink in hardware accelerated mode, use the
 "timer" trigger, and leave the delay_on and delay_off parameters set to
 zero (to request hardware acceleration autodetection).
 
+
 ACPI sounds -- /proc/acpi/ibm/beep
 ----------------------------------
 
@@ -968,6 +988,7 @@ X40:
 	16 - one medium-pitched beep repeating constantly, stop with 17
 	17 - stop 16
 
+
 Temperature sensors
 -------------------
 
@@ -1115,6 +1136,7 @@ registers contain the current battery capacity, etc. If you experiment
 with this, do send me your results (including some complete dumps with
 a description of the conditions when they were taken.)
 
+
 LCD brightness control
 ----------------------
 
@@ -1124,10 +1146,9 @@ sysfs backlight device "thinkpad_screen"
 This feature allows software control of the LCD brightness on ThinkPad
 models which don't have a hardware brightness slider.
 
-It has some limitations: the LCD backlight cannot be actually turned on or
-off by this interface, and in many ThinkPad models, the "dim while on
-battery" functionality will be enabled by the BIOS when this interface is
-used, and cannot be controlled.
+It has some limitations: the LCD backlight cannot be actually turned
+on or off by this interface, it just controls the backlight brightness
+level.
 
 On IBM (and some of the earlier Lenovo) ThinkPads, the backlight control
 has eight brightness levels, ranging from 0 to 7.  Some of the levels
@@ -1136,10 +1157,15 @@ display backlight brightness control methods have 16 levels, ranging
 from 0 to 15.
 
 There are two interfaces to the firmware for direct brightness control,
-EC and CMOS.  To select which one should be used, use the
+EC and UCMS (or CMOS).  To select which one should be used, use the
 brightness_mode module parameter: brightness_mode=1 selects EC mode,
-brightness_mode=2 selects CMOS mode, brightness_mode=3 selects both EC
-and CMOS.  The driver tries to auto-detect which interface to use.
+brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC
+mode with NVRAM backing (so that brightness changes are remembered
+across shutdown/reboot).
+
+The driver tries to select which interface to use from a table of
+defaults for each ThinkPad model.  If it makes a wrong choice, please
+report this as a bug, so that we can fix it.
 
 When display backlight brightness controls are available through the
 standard ACPI interface, it is best to use it instead of this direct
@@ -1201,6 +1227,7 @@ WARNING:
     and maybe reduce the life of the backlight lamps by needlessly kicking
     its level up and down at every change.
 
+
 Volume control -- /proc/acpi/ibm/volume
 ---------------------------------------
 
@@ -1217,6 +1244,11 @@ distinct. The unmute the volume after the mute command, use either the
 up or down command (the level command will not unmute the volume).
 The current volume level and mute state is shown in the file.
 
+The ALSA mixer interface to this feature is still missing, but patches
+to add it exist.  That problem should be addressed in the not so
+distant future.
+
+
 Fan control and monitoring: fan speed, fan enable/disable
 ---------------------------------------------------------
 
@@ -1383,8 +1415,11 @@ procfs: /proc/acpi/ibm/wan
 sysfs device attribute: wwan_enable (deprecated)
 sysfs rfkill class: switch "tpacpi_wwan_sw"
 
-This feature shows the presence and current state of a W-WAN (Sierra
-Wireless EV-DO) device.
+This feature shows the presence and current state of the built-in
+Wireless WAN device.
+
+If the ThinkPad supports it, the WWAN state is stored in NVRAM,
+so it is kept across reboots and power-off.
 
 It was tested on a Lenovo ThinkPad X60. It should probably work on other
 ThinkPad models which come with this module installed.
@@ -1413,6 +1448,7 @@ Sysfs notes:
 	rfkill controller switch "tpacpi_wwan_sw": refer to
 	Documentation/rfkill.txt for details.
 
+
 EXPERIMENTAL: UWB
 -----------------
 
@@ -1431,6 +1467,7 @@ Sysfs notes:
 	rfkill controller switch "tpacpi_uwb_sw": refer to
 	Documentation/rfkill.txt for details.
 
+
 Multiple Commands, Module Parameters
 ------------------------------------
 
@@ -1445,6 +1482,7 @@ for example:
 
 	modprobe thinkpad_acpi hotkey=enable,0xffff video=auto_disable
 
+
 Enabling debugging output
 -------------------------
 
@@ -1457,8 +1495,15 @@ will enable all debugging output classes.  It takes a bitmask, so
 to enable more than one output class, just add their values.
 
 	Debug bitmask		Description
+	0x8000			Disclose PID of userspace programs
+				accessing some functions of the driver
 	0x0001			Initialization and probing
 	0x0002			Removal
+	0x0004			RF Transmitter control (RFKILL)
+				(bluetooth, WWAN, UWB...)
+	0x0008			HKEY event interface, hotkeys
+	0x0010			Fan control
+	0x0020			Backlight brightness
 
 There is also a kernel build option to enable more debugging
 information, which may be necessary to debug driver problems.
@@ -1467,6 +1512,7 @@ The level of debugging information output by the driver can be changed
 at runtime through sysfs, using the driver attribute debug_level.  The
 attribute takes the same bitmask as the debug module parameter above.
 
+
 Force loading of module
 -----------------------
 
@@ -1505,3 +1551,7 @@ Sysfs interface changelog:
 
 0x020200:	Add poll()/select() support to the following attributes:
 		hotkey_radio_sw, wakeup_hotunplug_complete, wakeup_reason
+
+0x020300:	hotkey enable/disable support removed, attributes
+		hotkey_bios_enabled and hotkey_enable deprecated and
+		marked for removal.
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index f2dbbf3bdea..d36fcc0f271 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -1630,6 +1630,13 @@ static bool service_io(struct device *dev)
 		}
 	}
 
+	/* OK, so we noted that it was pretty poor to use an fdatasync as a
+	 * barrier.  But Christoph Hellwig points out that we need a sync
+	 * *afterwards* as well: "Barriers specify no reordering to the front
+	 * or the back."  And Jens Axboe confirmed it, so here we are: */
+	if (out->type & VIRTIO_BLK_T_BARRIER)
+		fdatasync(vblk->fd);
+
 	/* We can't trigger an IRQ, because we're not the Launcher.  It does
 	 * that when we tell it we're done. */
 	add_used(dev->vq, head, wlen);
diff --git a/Documentation/logo.gif b/Documentation/logo.gif
deleted file mode 100644
index 2eae75fecfb..00000000000
--- a/Documentation/logo.gif
+++ /dev/null
diff --git a/Documentation/logo.svg b/Documentation/logo.svg
new file mode 100644
index 00000000000..cb9e4851d8c
--- /dev/null
+++ b/Documentation/logo.svg
@@ -0,0 +1,2911 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:xlink="http://www.w3.org/1999/xlink"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="1771.6534"
+   height="1417.3228"
+   id="svg2"
+   sodipodi:version="0.32"
+   inkscape:version="0.46"
+   sodipodi:docname="tuz.svg"
+   inkscape:output_extension="org.inkscape.output.svg.inkscape"
+   version="1.0"
+   style="display:inline;enable-background:new"
+   inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_final.png"
+   inkscape:export-xdpi="100.03588"
+   inkscape:export-ydpi="100.03588">
+  <sodipodi:namedview
+     id="base"
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1.0"
+     gridtolerance="10000"
+     guidetolerance="10"
+     objecttolerance="10"
+     inkscape:pageopacity="0.0"
+     inkscape:pageshadow="2"
+     inkscape:zoom="0.25"
+     inkscape:cx="-174.7931"
+     inkscape:cy="784.26325"
+     inkscape:document-units="px"
+     inkscape:current-layer="svg2"
+     showgrid="false"
+     inkscape:window-width="1280"
+     inkscape:window-height="823"
+     inkscape:window-x="-4"
+     inkscape:window-y="25"
+     showguides="true"
+     inkscape:guide-bbox="true"
+     units="mm" />
+  <defs
+     id="defs4">
+    <filter
+       inkscape:collect="always"
+       x="-0.084654994"
+       width="1.16931"
+       y="-0.36592469"
+       height="1.7318494"
+       id="filter11361">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="4.5740586"
+         id="feGaussianBlur11363" />
+    </filter>
+    <inkscape:perspective
+       sodipodi:type="inkscape:persp3d"
+       inkscape:vp_x="0 : 564.0976 : 1"
+       inkscape:vp_y="0 : 1000 : 0"
+       inkscape:vp_z="1445.8591 : 564.0976 : 1"
+       inkscape:persp3d-origin="722.92957 : 376.06506 : 1"
+       id="perspective8145" />
+    <linearGradient
+       id="linearGradient7622">
+      <stop
+         style="stop-color:#ffffff;stop-opacity:1;"
+         offset="0"
+         id="stop7624" />
+      <stop
+         style="stop-color:#ffffff;stop-opacity:0;"
+         offset="1"
+         id="stop7626" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient4113">
+      <stop
+         style="stop-color:#000000;stop-opacity:0;"
+         offset="0"
+         id="stop4115" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="1"
+         id="stop4117" />
+    </linearGradient>
+    <linearGradient
+       inkscape:collect="always"
+       id="linearGradient3660">
+      <stop
+         style="stop-color:#ffffff;stop-opacity:1;"
+         offset="0"
+         id="stop3662" />
+      <stop
+         style="stop-color:#ffffff;stop-opacity:0;"
+         offset="1"
+         id="stop3664" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3627">
+      <stop
+         style="stop-color:#ffffff;stop-opacity:1;"
+         offset="0"
+         id="stop3629" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="1"
+         id="stop3631" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient2843">
+      <stop
+         id="stop2845"
+         offset="0"
+         style="stop-color:#000000;stop-opacity:1;" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="0.02188784"
+         id="stop2847" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="0.75866222"
+         id="stop2849" />
+      <stop
+         id="stop2851"
+         offset="0.88508981"
+         style="stop-color:#232323;stop-opacity:1;" />
+      <stop
+         id="stop2853"
+         offset="1"
+         style="stop-color:#595959;stop-opacity:1;" />
+    </linearGradient>
+    <linearGradient
+       inkscape:collect="always"
+       id="linearGradient8964">
+      <stop
+         style="stop-color:#1a1a1a;stop-opacity:1;"
+         offset="0"
+         id="stop8966" />
+      <stop
+         style="stop-color:#1a1a1a;stop-opacity:0;"
+         offset="1"
+         id="stop8968" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient8952">
+      <stop
+         style="stop-color:#0a0c0c;stop-opacity:1;"
+         offset="0"
+         id="stop8954" />
+      <stop
+         style="stop-color:#1f2727;stop-opacity:0;"
+         offset="1"
+         id="stop8956" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient8430">
+      <stop
+         style="stop-color:#1e2323;stop-opacity:1;"
+         offset="0"
+         id="stop8432" />
+      <stop
+         id="stop8438"
+         offset="0.55992389"
+         style="stop-color:#181d1d;stop-opacity:1;" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="1"
+         id="stop8434" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient8398">
+      <stop
+         style="stop-color:#283131;stop-opacity:0;"
+         offset="0"
+         id="stop8400" />
+      <stop
+         id="stop8402"
+         offset="0.5125587"
+         style="stop-color:#1e2424;stop-opacity:0;" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="1"
+         id="stop8404" />
+    </linearGradient>
+    <linearGradient
+       inkscape:collect="always"
+       id="linearGradient4870">
+      <stop
+         style="stop-color:#c7bd80;stop-opacity:1;"
+         offset="0"
+         id="stop4872" />
+      <stop
+         style="stop-color:#c7bd80;stop-opacity:0;"
+         offset="1"
+         id="stop4874" />
+    </linearGradient>
+    <linearGradient
+       inkscape:collect="always"
+       id="linearGradient4862">
+      <stop
+         style="stop-color:#e2e2e2;stop-opacity:1;"
+         offset="0"
+         id="stop4864" />
+      <stop
+         style="stop-color:#e2e2e2;stop-opacity:0;"
+         offset="1"
+         id="stop4866" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient4478">
+      <stop
+         style="stop-color:#f9eed3;stop-opacity:1;"
+         offset="0"
+         id="stop4480" />
+      <stop
+         style="stop-color:#000000;stop-opacity:0;"
+         offset="1"
+         id="stop4482" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient4106">
+      <stop
+         style="stop-color:#d9e002;stop-opacity:1;"
+         offset="0"
+         id="stop4108" />
+      <stop
+         id="stop4114"
+         offset="0.5"
+         style="stop-color:#a9ae01;stop-opacity:1;" />
+      <stop
+         style="stop-color:#717501;stop-opacity:1;"
+         offset="1"
+         id="stop4110" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient4084">
+      <stop
+         style="stop-color:#7d7d00;stop-opacity:1;"
+         offset="0"
+         id="stop4086" />
+      <stop
+         id="stop4088"
+         offset="0.3636601"
+         style="stop-color:#c6c700;stop-opacity:1;" />
+      <stop
+         style="stop-color:#f6f800;stop-opacity:1;"
+         offset="1"
+         id="stop4090" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient4041">
+      <stop
+         id="stop4043"
+         offset="0"
+         style="stop-color:#ffff00;stop-opacity:1;" />
+      <stop
+         id="stop4045"
+         offset="1"
+         style="stop-color:#ffff00;stop-opacity:0;" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient4025">
+      <stop
+         style="stop-color:#ffffff;stop-opacity:1;"
+         offset="0"
+         id="stop4027" />
+      <stop
+         style="stop-color:#ffffff;stop-opacity:0;"
+         offset="1"
+         id="stop4031" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient4013">
+      <stop
+         style="stop-color:#ffff00;stop-opacity:1;"
+         offset="0"
+         id="stop4015" />
+      <stop
+         style="stop-color:#b2b200;stop-opacity:1;"
+         offset="1"
+         id="stop4017" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3985">
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="0"
+         id="stop3987" />
+      <stop
+         style="stop-color:#1d1d1d;stop-opacity:1;"
+         offset="1"
+         id="stop3989" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3961">
+      <stop
+         style="stop-color:#283131;stop-opacity:0;"
+         offset="0"
+         id="stop3963" />
+      <stop
+         id="stop3965"
+         offset="0.5"
+         style="stop-color:#1e2424;stop-opacity:1;" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="1"
+         id="stop3967" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3951">
+      <stop
+         id="stop3953"
+         offset="0"
+         style="stop-color:#344040;stop-opacity:1;" />
+      <stop
+         style="stop-color:#222929;stop-opacity:1;"
+         offset="0.5"
+         id="stop3955" />
+      <stop
+         id="stop3957"
+         offset="1"
+         style="stop-color:#000000;stop-opacity:1;" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3909">
+      <stop
+         style="stop-color:#283131;stop-opacity:1;"
+         offset="0"
+         id="stop3911" />
+      <stop
+         id="stop3917"
+         offset="0.5"
+         style="stop-color:#1e2424;stop-opacity:1;" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="1"
+         id="stop3913" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3537">
+      <stop
+         style="stop-color:#ada469;stop-opacity:1;"
+         offset="0"
+         id="stop3539" />
+      <stop
+         id="stop3545"
+         offset="0.81132078"
+         style="stop-color:#ada469;stop-opacity:1;" />
+      <stop
+         style="stop-color:#ffffff;stop-opacity:1;"
+         offset="1"
+         id="stop3541" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3317">
+      <stop
+         style="stop-color:#cfc690;stop-opacity:1"
+         offset="0"
+         id="stop3319" />
+      <stop
+         id="stop3321"
+         offset="0.21161865"
+         style="stop-color:#afa775;stop-opacity:1;" />
+      <stop
+         id="stop3323"
+         offset="0.53408515"
+         style="stop-color:#615c3a;stop-opacity:1;" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="0.76504093"
+         id="stop3325" />
+      <stop
+         id="stop3327"
+         offset="1"
+         style="stop-color:#403518;stop-opacity:1;" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3239">
+      <stop
+         id="stop3251"
+         offset="0"
+         style="stop-color:#cfc690;stop-opacity:1;" />
+      <stop
+         style="stop-color:#afa775;stop-opacity:1;"
+         offset="0.21161865"
+         id="stop3267" />
+      <stop
+         style="stop-color:#615c3a;stop-opacity:1;"
+         offset="0.53408515"
+         id="stop3261" />
+      <stop
+         id="stop3265"
+         offset="0.76504093"
+         style="stop-color:#000000;stop-opacity:1;" />
+      <stop
+         style="stop-color:#403518;stop-opacity:1;"
+         offset="1"
+         id="stop3243" />
+    </linearGradient>
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3239"
+       id="radialGradient3281"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(1.5480423,1.7414304,-1.9683515,1.7497638,-1130.5586,-1872.5121)"
+       spreadMethod="pad"
+       cx="806.52582"
+       cy="212.68117"
+       fx="806.52582"
+       fy="212.68117"
+       r="48.363216" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3317"
+       id="radialGradient3315"
+       cx="543.6698"
+       cy="147.3131"
+       fx="543.6698"
+       fy="147.3131"
+       r="47.863216"
+       gradientTransform="matrix(2.1382256,0,0,2.3382884,-77.03847,-101.68704)"
+       gradientUnits="userSpaceOnUse" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3537"
+       id="radialGradient3543"
+       cx="385"
+       cy="237.00504"
+       fx="385"
+       fy="237.00504"
+       r="86.928574"
+       gradientTransform="matrix(1,0,0,0.8562038,0,34.080427)"
+       gradientUnits="userSpaceOnUse" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3909"
+       id="radialGradient3915"
+       cx="418.30365"
+       cy="342.47794"
+       fx="418.30365"
+       fy="342.47794"
+       r="131.4509"
+       gradientTransform="matrix(1.3957347,0.6211056,-0.4244067,0.9537174,-15.061913,-227.96711)"
+       gradientUnits="userSpaceOnUse" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3951"
+       id="radialGradient3933"
+       cx="397.16388"
+       cy="336.95245"
+       fx="397.16388"
+       fy="336.95245"
+       r="36.75"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(1.9449972,2.4894837e-7,-2.4894833e-7,1.9449969,-375.31868,-318.41912)" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3961"
+       id="linearGradient3959"
+       x1="398.21429"
+       y1="343.52289"
+       x2="379.28571"
+       y2="265.30862"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="translate(450.03125,73.843964)" />
+    <filter
+       inkscape:collect="always"
+       id="filter3981"
+       x="-0.30000001"
+       width="1.6"
+       y="-0.30000001"
+       height="1.6">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="2"
+         id="feGaussianBlur3983" />
+    </filter>
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3985"
+       id="radialGradient3991"
+       cx="402.48898"
+       cy="317.23578"
+       fx="402.48898"
+       fy="317.23578"
+       r="23.714285"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(4.3776616,0,0,4.3776616,-1358.3025,-1070.7357)" />
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3999">
+      <path
+         style="opacity:1;fill:#f5ff04;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline"
+         d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 339.75316,358.17469 330.35714,331.29075 C 320.9229,304.29747 295.38973,272.16627 263.92857,261.6479 C 232.8953,251.27258 198.91081,256.79953 179.64286,267.36218 z"
+         id="path4001"
+         sodipodi:nodetypes="czzczzzzc" />
+    </clipPath>
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4013"
+       id="radialGradient4056"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
+       cx="228.81355"
+       cy="440.26971"
+       fx="228.81355"
+       fy="440.26971"
+       r="119.17509" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4041"
+       id="radialGradient4060"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)"
+       cx="275.4422"
+       cy="335.34866"
+       fx="275.4422"
+       fy="335.34866"
+       r="36.75" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4025"
+       id="radialGradient4062"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)"
+       cx="275.4422"
+       cy="335.34866"
+       fx="275.4422"
+       fy="335.34866"
+       r="36.75" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4084"
+       id="linearGradient4082"
+       gradientUnits="userSpaceOnUse"
+       x1="182.35046"
+       y1="256.11136"
+       x2="145.53348"
+       y2="542.20502" />
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath4100">
+      <path
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.9000755px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+         d="M 265.93541,126.68393 L 247.1682,295.54701 L 421.27363,222.42633 L 483.22803,311.08516 L 541.11243,279.09486 L 503.57801,99.035183 L 265.93541,126.68393 z"
+         id="path4102"
+         sodipodi:nodetypes="ccccccc" />
+    </clipPath>
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4106"
+       id="radialGradient4112"
+       cx="250.22678"
+       cy="475.09763"
+       fx="250.22678"
+       fy="475.09763"
+       r="95.98877"
+       gradientTransform="matrix(1.2259004,-0.7077739,0.1413989,0.2449102,322.22326,608.91815)"
+       gradientUnits="userSpaceOnUse" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4478"
+       id="linearGradient4484"
+       x1="412.08926"
+       y1="404.91574"
+       x2="417.375"
+       y2="401.82648"
+       gradientUnits="userSpaceOnUse" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4478"
+       id="linearGradient4486"
+       x1="411.91071"
+       y1="404.91577"
+       x2="417.375"
+       y2="401.82648"
+       gradientUnits="userSpaceOnUse" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4478"
+       id="linearGradient4488"
+       x1="411.91071"
+       y1="405.54077"
+       x2="417.375"
+       y2="401.82648"
+       gradientUnits="userSpaceOnUse" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4478"
+       id="linearGradient4490"
+       x1="412.08926"
+       y1="405.54077"
+       x2="417.375"
+       y2="401.82648"
+       gradientUnits="userSpaceOnUse" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4478"
+       id="linearGradient4492"
+       x1="411.73212"
+       y1="405.54077"
+       x2="417.375"
+       y2="401.82648"
+       gradientUnits="userSpaceOnUse" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4862"
+       id="radialGradient4868"
+       cx="429.56738"
+       cy="377.42877"
+       fx="429.56738"
+       fy="377.42877"
+       r="72.079735"
+       gradientTransform="matrix(1,0,0,0.618034,0,144.16496)"
+       gradientUnits="userSpaceOnUse" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4870"
+       id="radialGradient4876"
+       cx="437.6991"
+       cy="391.21735"
+       fx="437.6991"
+       fy="391.21735"
+       r="36.611931"
+       gradientTransform="matrix(1,0,0,0.618034,0,149.43174)"
+       gradientUnits="userSpaceOnUse" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4013"
+       id="radialGradient3585"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
+       cx="228.81355"
+       cy="440.26971"
+       fx="228.81355"
+       fy="440.26971"
+       r="119.17509" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4084"
+       id="linearGradient3587"
+       gradientUnits="userSpaceOnUse"
+       x1="182.35046"
+       y1="256.11136"
+       x2="145.53348"
+       y2="542.20502" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3317"
+       id="radialGradient8410"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-753.99632,-302.76972)"
+       cx="317.78754"
+       cy="129.65378"
+       fx="317.78754"
+       fy="129.65378"
+       r="47.863216" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient8398"
+       id="radialGradient8412"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-1144.2358,-272.29325)"
+       cx="325.30847"
+       cy="80.909554"
+       fx="325.30847"
+       fy="80.909554"
+       r="26.937988" />
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8514">
+      <path
+         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+         id="path8516"
+         sodipodi:nodetypes="cscccccccccccc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8604">
+      <path
+         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+         id="path8606"
+         sodipodi:nodetypes="cscccccccccccc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8610">
+      <path
+         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+         id="path8612"
+         sodipodi:nodetypes="cscccccccccccc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8616">
+      <path
+         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+         id="path8618"
+         sodipodi:nodetypes="cscccccccccccc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8622">
+      <path
+         style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+         d="M 821.64329,477.88997 C 821.64329,477.88997 844.26276,471.38316 857.38604,472.01724 C 870.50932,472.65133 888.02762,473.95586 901.09489,484.20343 C 914.16216,494.45099 926.16263,511.3435 935.20728,542.57308 C 944.25193,573.80266 936.9056,641.82509 929.03125,685.92043 C 921.1569,730.01577 900.76615,792.03341 884.03125,825.92043 C 867.29635,859.80745 834.23354,903.41563 823.46182,915.79659 C 812.0976,928.85856 767.25593,952.22276 744.03125,958.06326 C 749.33455,947.45666 792.93101,907.47442 779.03125,897.349 C 765.01228,887.13674 733.27116,943.33136 694.7381,926.38217 C 716.12041,913.25005 736.5175,875.19611 728.77871,859.78772 C 720.93846,844.17733 698.07378,908.54529 635.24317,896.8006 C 665.29521,869.27394 690.65023,825.89659 676.50587,813.8209 C 662.09071,801.51403 616.04412,868.11405 616.04412,868.11405 C 616.04412,868.11405 613.22222,826.41287 629.81732,799.50673 C 646.45667,772.52886 709.47029,717.89146 729.37045,687.80331 C 749.2706,657.71517 762.98301,621.79429 771.50587,595.28537 C 780.02873,568.77645 787.30681,518.18583 787.30681,518.18583"
+         id="path8624"
+         sodipodi:nodetypes="czzzzzzczczczczzzc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8642">
+      <path
+         style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z"
+         id="path8644"
+         sodipodi:nodetypes="czzcczcc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8658">
+      <path
+         style="opacity:1;fill:#0b0b0b;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 411.39918,1054.7395 368.31696,1064.4919 C 325.23474,1074.2443 251.05253,1099.3079 211.40434,1091.7573 C 171.75616,1084.2067 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z"
+         id="path8660"
+         sodipodi:nodetypes="czzzcczzcc" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter8802"
+       x="-0.35311759"
+       width="1.7062352"
+       y="-0.1817714"
+       height="1.3635428">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="48.038491"
+         id="feGaussianBlur8804" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8806"
+       x="-0.61142862"
+       width="2.2228572"
+       y="-0.14930232"
+       height="1.2986046">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="37.830213"
+         id="feGaussianBlur8808" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8810"
+       x="-0.23519406"
+       width="1.4703881"
+       y="-0.24500646"
+       height="1.4900129">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="58.328041"
+         id="feGaussianBlur8812" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8814"
+       x="-0.20466694"
+       width="1.4093339"
+       y="-0.29007819"
+       height="1.5801564">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="22.300169"
+         id="feGaussianBlur8816" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8818"
+       x="-0.34381232"
+       width="1.6876246"
+       y="-0.18433961"
+       height="1.3686792">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="34.542167"
+         id="feGaussianBlur8820" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8822"
+       x="-0.2742857"
+       width="1.5485713"
+       y="-0.21333334"
+       height="1.4266667">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="11.313708"
+         id="feGaussianBlur8824" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8826"
+       x="-0.25894088"
+       width="1.5178818"
+       y="-0.2236412"
+       height="1.4472824">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="19.631544"
+         id="feGaussianBlur8828" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8856"
+       x="-0.3253231"
+       width="1.6506462"
+       y="-0.19013336"
+       height="1.3802667">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="28.712591"
+         id="feGaussianBlur8858" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8860"
+       x="-0.38093024"
+       width="1.7618605"
+       y="-0.17518716"
+       height="1.3503743">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="19.304015"
+         id="feGaussianBlur8862" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8888"
+       x="-0.2112188"
+       width="1.4224375"
+       y="-0.16808605"
+       height="1.3361721">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="8.3693583"
+         id="feGaussianBlur8890" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8892"
+       x="-0.18692794"
+       width="1.3738559"
+       y="-0.23646873"
+       height="1.4729375">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="31.21228"
+         id="feGaussianBlur8894" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8906">
+      <path
+         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+         id="path8908"
+         sodipodi:nodetypes="cscccccccccccc" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter8940"
+       x="-0.25152978"
+       width="1.5030596"
+       y="-0.053035267"
+       height="1.1060705">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="13.024603"
+         id="feGaussianBlur8942" />
+    </filter>
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient8952"
+       id="linearGradient8958"
+       x1="609.31244"
+       y1="239.46866"
+       x2="560.83142"
+       y2="262.86206"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="translate(450.03125,73.843964)" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient8964"
+       id="linearGradient8970"
+       x1="603.84064"
+       y1="627.85303"
+       x2="616.24396"
+       y2="585.42664"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="translate(450.03125,73.843964)" />
+    <filter
+       inkscape:collect="always"
+       id="filter9020"
+       x="-0.32861114"
+       width="1.6572223"
+       y="-0.182"
+       height="1.364">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="20.912684"
+         id="feGaussianBlur9022" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter9024"
+       x="-0.55453134"
+       width="2.1090627"
+       y="-0.51434779"
+       height="2.0286956">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="20.912684"
+         id="feGaussianBlur9026" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter9044"
+       x="-0.32631579"
+       width="1.6526316"
+       y="-0.84545463"
+       height="2.6909094">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="21.92031"
+         id="feGaussianBlur9046" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter9048"
+       x="-0.40879121"
+       width="1.8175824"
+       y="-0.71538466"
+       height="2.4307692">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="21.92031"
+         id="feGaussianBlur9050" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter3587"
+       x="-0.1">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="8.881432"
+         id="feGaussianBlur3589" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3602">
+      <path
+         sodipodi:nodetypes="czzzzzzczczczczzzc"
+         id="path3604"
+         d="M 647.61204,540.04601 C 647.61204,540.04601 670.23151,533.5392 683.35479,534.17328 C 696.47807,534.80737 713.99637,536.1119 727.06364,546.35947 C 740.13091,556.60703 752.13138,573.49954 761.17603,604.72912 C 770.22068,635.9587 762.87435,703.98113 755,748.07647 C 747.12565,792.17181 726.7349,854.18945 710,888.07647 C 693.2651,921.96349 660.20229,965.57167 649.43057,977.95263 C 638.06635,991.0146 593.22468,1014.3788 570,1020.2193 C 575.3033,1009.6127 618.89976,969.63046 605,959.50504 C 590.98103,949.29278 559.23991,1005.4874 520.70685,988.53821 C 542.08916,975.40609 562.48625,937.35215 554.74746,921.94376 C 546.90721,906.33337 524.04253,970.70133 461.21192,958.95664 C 491.26396,931.42998 516.61898,888.05263 502.47462,875.97694 C 488.05946,863.67007 442.01287,930.27009 442.01287,930.27009 C 442.01287,930.27009 439.19097,888.56891 455.78607,861.66277 C 472.42542,834.6849 535.43904,780.0475 555.3392,749.95935 C 575.23935,719.87121 588.95176,683.95033 597.47462,657.44141 C 605.99748,630.93249 613.27556,580.34187 613.27556,580.34187"
+         style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter4120"
+       x="-0.2770822"
+       width="1.5541644"
+       y="-0.32482043"
+       height="1.6496409">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="19.956289"
+         id="feGaussianBlur4122" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3631">
+      <path
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+         d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
+         id="path3633"
+         sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3665">
+      <path
+         sodipodi:nodetypes="czzcczcc"
+         id="path3667"
+         d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z"
+         style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3677">
+      <path
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+         d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z"
+         id="path3679"
+         sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter3898">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="10.892985"
+         id="feGaussianBlur3900" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter4130"
+       x="-0.49509686"
+       width="1.9901937"
+       y="-0.26708817"
+       height="1.5341763">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="10.730622"
+         id="feGaussianBlur4132" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter4141"
+       x="-0.40611032"
+       width="1.8122206"
+       y="-0.30260596"
+       height="1.6052119">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="9.8586086"
+         id="feGaussianBlur4143" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath4177">
+      <path
+         sodipodi:nodetypes="czzzzzzcccccccccczczz"
+         id="path4179"
+         d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z"
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter4185">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="3.6164709"
+         id="feGaussianBlur4187" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter4105">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="3.8640966"
+         id="feGaussianBlur4107" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath2833">
+      <path
+         style="opacity:1;fill:#292929;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 453.86016,1033.7437 375.38803,1046.1072 C 295.53625,1058.688 281.32367,1088.6495 267.26578,1093.1715 C 252.56564,1097.9001 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z"
+         id="path2835"
+         sodipodi:nodetypes="czzzcczzcc" />
+    </clipPath>
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient2843"
+       id="linearGradient2841"
+       gradientUnits="userSpaceOnUse"
+       x1="347.89655"
+       y1="1070.2124"
+       x2="275.58191"
+       y2="867.97992" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3627"
+       id="linearGradient3688"
+       gradientUnits="userSpaceOnUse"
+       x1="699.32867"
+       y1="269.76755"
+       x2="698.97504"
+       y2="346.1351" />
+    <mask
+       maskUnits="userSpaceOnUse"
+       id="mask3684">
+      <path
+         sodipodi:type="arc"
+         style="opacity:1;fill:url(#linearGradient3688);fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.43724918px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         id="path3686"
+         sodipodi:cx="579.474"
+         sodipodi:cy="260.57516"
+         sodipodi:rx="192.6866"
+         sodipodi:ry="164.04877"
+         d="M 772.1606,260.57516 A 192.6866,164.04877 0 1 1 386.7874,260.57516 A 192.6866,164.04877 0 1 1 772.1606,260.57516 z"
+         transform="translate(-174.03125,62.156036)" />
+    </mask>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3622">
+      <path
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+         d="M 266.27183,924.57186 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87514 C 271.58022,990.42748 284.75965,1019.7825 288.68797,1037.0589 C 292.61419,1054.326 291.3821,1075.3685 276.22853,1088.2071 C 260.91092,1101.1845 234.17726,1109.806 208.39623,1103.9409 C 182.61517,1098.0756 138.84716,1054.7175 119.80604,1033.7126 C 100.6939,1012.6293 56.045183,939.86194 41.867508,909.43681 C 27.689836,879.01169 29.207903,872.71824 33.747793,863.90708 C 24.381071,839.38658 21.334081,813.84027 0.035335518,788.33044 C 30.360815,791.44488 43.915625,815.28677 60.161025,835.47019 C 54.631129,787.39416 42.10631,771.05369 31.787073,744.74589 C 61.781368,750.82755 82.366433,776.61829 95.766856,817.45839 C 105.32101,813.54048 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.00481,738.48135 89.267015,707.32725 C 142.70898,712.99758 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.42601,751.28936 177.62716,712.76848 195.01526,670.9882 C 195.01526,670.9882 243.30204,736.42507 249.40492,756.79397 C 255.50779,777.16288 250.92373,795.49449 250.92373,795.49449 C 250.92373,795.49449 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82997 267.68496,905.69194 266.27183,924.57186 z"
+         id="path3624"
+         sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3636">
+      <path
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+         d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
+         id="path3638"
+         sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+    </clipPath>
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3660"
+       id="linearGradient3666"
+       x1="1255.7386"
+       y1="667.09216"
+       x2="893.69995"
+       y2="858.01099"
+       gradientUnits="userSpaceOnUse" />
+    <filter
+       inkscape:collect="always"
+       id="filter3779"
+       x="-0.087980822"
+       width="1.1759616"
+       y="-0.17728332"
+       height="1.3545666">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="16.340344"
+         id="feGaussianBlur3781" />
+    </filter>
+    <filter
+       id="filter3785"
+       inkscape:label="White Fur">
+      <feTurbulence
+         id="feTurbulence3787"
+         in="SourceAlpha"
+         type="fractalNoise"
+         baseFrequency="0.24044943820224721"
+         numOctaves="10"
+         seed="655"
+         result="result0" />
+      <feDisplacementMap
+         id="feDisplacementMap3789"
+         in="SourceGraphic"
+         in2="result0"
+         scale="62"
+         xChannelSelector="B"
+         yChannelSelector="G" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter3677">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="2.0397518"
+         id="feGaussianBlur3679" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3722">
+      <path
+         style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
+         id="path3724"
+         sodipodi:nodetypes="czzzzzzzzcc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3986">
+      <path
+         style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
+         id="path3988"
+         sodipodi:nodetypes="czzzzzzzzcc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3992">
+      <path
+         style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
+         id="path3994"
+         sodipodi:nodetypes="czzzzzzzzcc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3998">
+      <path
+         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 178.21428,274.14789 C 174.40985,248.88366 161.40456,223.50987 161.05748,198.62266 C 160.87122,185.26714 164.33033,172.05175 174.81301,159.06861 C 211.16003,93.772775 291.75392,74.373925 360.74767,67.603183 C 447.67006,56.586382 545.66034,85.543255 594.11901,163.00447 C 648.24303,238.73777 650.79377,335.54359 674.73105,422.53242 C 704.16884,549.66002 729.51019,678.74656 735.12329,809.38277 C 732.05981,887.56462 726.69695,974.56692 674.62008,1037.5169 C 626.59354,1087.8743 551.83361,1087.5699 487.5502,1096.5192 C 396.99481,1101.1742 303.19867,1080.3734 225.7663,1032.321 C 160.99066,994.38099 130.03611,918.84237 128.4869,846.30142 C 120.09773,766.42626 154.87842,692.49291 180.1073,619.14181 C 187.57791,536.38074 189.52016,452.89406 189.76064,369.75697 C 188.92382,337.56153 182.67111,305.93964 178.21428,274.14789 z"
+         id="path4000"
+         sodipodi:nodetypes="cscccccccccccc" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter4002"
+       x="-0.24334238"
+       width="1.4866848"
+       y="-0.39104807"
+       height="1.7820961">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="14.589518"
+         id="feGaussianBlur4004" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter4010"
+       x="-0.14577261"
+       width="1.2915452"
+       y="-0.23523259"
+       height="1.4704652">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="4.4442907"
+         id="feGaussianBlur4012" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter4053">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.6062947"
+         id="feGaussianBlur4055" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter4079">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="6.5887624"
+         id="feGaussianBlur4081" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter4083">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.5052066"
+         id="feGaussianBlur4085" />
+    </filter>
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4113"
+       id="radialGradient4119"
+       cx="296.33783"
+       cy="427.17749"
+       fx="296.33783"
+       fy="427.17749"
+       r="19.704132"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(2.9797125,0,0,2.9797125,-599.28727,-827.0855)" />
+    <filter
+       inkscape:collect="always"
+       id="filter6949"
+       x="-0.10294895"
+       width="1.2058979"
+       y="-0.34224695"
+       height="1.6844939">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6951" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6953"
+       x="-0.098320946"
+       width="1.1966419"
+       y="-0.19750816"
+       height="1.3950163">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6955" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6957"
+       x="-0.098213427"
+       width="1.1964267"
+       y="-0.19838208"
+       height="1.3967642">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6959" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6961"
+       x="-0.09919104"
+       width="1.1983821"
+       y="-0.22643611"
+       height="1.4528722">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6963" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6965"
+       x="-0.099081434"
+       width="1.1981629"
+       y="-0.22529824"
+       height="1.4505965">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6967" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6969"
+       x="-0.10450897"
+       width="1.2090179"
+       y="-0.40468886"
+       height="1.8093777">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6971" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6973"
+       x="-0.10330495"
+       width="1.2066098"
+       y="-0.36439717"
+       height="1.7287945">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6975" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6977"
+       x="-0.10224481"
+       width="1.2044896"
+       y="-0.32371372"
+       height="1.6474274">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6979" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6981"
+       x="-0.10052545"
+       width="1.2010509"
+       y="-0.2742162"
+       height="1.5484324">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6983" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6985"
+       x="-0.098428868"
+       width="1.1968577"
+       y="-0.20853186"
+       height="1.4170637">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6987" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6989"
+       x="-0.098428868"
+       width="1.1968577"
+       y="-0.20287035"
+       height="1.4057407">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6991" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6993"
+       x="-0.098213255"
+       width="1.1964265"
+       y="-0.19838208"
+       height="1.3967642">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6995" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6997">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6999" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7001">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur7003" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7285"
+       x="-0.030884685"
+       width="1.0617694"
+       y="-0.10267408"
+       height="1.2053483">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7287" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7289">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7291" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7293">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7295" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7297">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7299" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7301">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7303" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7305">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7307" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7309">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7311" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7313">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7315" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7317">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7319" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7321">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7323" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7325"
+       x="-0.031352691"
+       width="1.0627054"
+       y="-0.12140666"
+       height="1.2428133">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7327" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7329"
+       x="-0.030991485"
+       width="1.061983"
+       y="-0.10931916"
+       height="1.2186383">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7331" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7333">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7335" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7337">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7339" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7345">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.7233839"
+         id="feGaussianBlur7347" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath7421">
+      <path
+         sodipodi:type="inkscape:offset"
+         inkscape:radius="0"
+         inkscape:original="M 1111.4062 -285.9375 L 1107.4688 -284.0625 C 1107.4283 -284.05228 1107.3692 -284.04201 1107.3438 -284.03125 C 1106.925 -283.8184 1107.1791 -283.93067 1106.6875 -283.71875 C 1106.2014 -283.50919 1104.9499 -283.13456 1102.5938 -282.25 C 1099.2626 -280.99942 1096.7895 -280.10016 1095.5938 -279.1875 C 1094.0576 -279.16623 1091.8733 -278.95419 1089.9375 -278.46875 C 1086.956 -277.72108 1085.0823 -277.29474 1083.1875 -276.875 C 1081.2927 -276.45527 1081.512 -276.23281 1080.3125 -276 C 1079.0159 -275.74833 1078.5911 -276.00899 1074.875 -275.21875 C 1071.3851 -274.4766 1065.9802 -273.28768 1064.7188 -272.53125 C 1063.1348 -272.71203 1060.8513 -272.85303 1058.875 -272.5625 C 1055.8346 -272.11554 1053.9588 -271.88974 1052.0312 -271.65625 C 1051.3758 -271.57687 1050.9902 -271.45547 1050.6875 -271.375 C 1050.2613 -271.24334 1050.0017 -271.11498 1049.3125 -271.03125 C 1048.0009 -270.87188 1047.5503 -271.18808 1043.7812 -270.75 C 1040.2273 -270.33691 1034.7758 -269.47718 1033.5312 -268.8125 C 1031.9322 -269.10979 1029.6735 -269.34669 1027.6875 -269.15625 C 1024.6287 -268.86293 1022.7155 -268.67226 1020.7812 -268.5 C 1018.847 -268.32773 1019.0926 -268.07763 1017.875 -267.96875 C 1016.5588 -267.85105 1016.1152 -268.13238 1012.3438 -267.71875 C 1008.8017 -267.3303 1003.3359 -266.50948 1002.0625 -265.84375 C 1000.4636 -266.13844 998.1753 -266.35076 996.1875 -266.15625 C 993.12921 -265.857 991.2463 -265.67601 989.3125 -265.5 C 988.65501 -265.44015 988.27245 -265.32144 987.96875 -265.25 C 987.54105 -265.13104 987.28525 -265.03193 986.59375 -264.96875 C 985.27775 -264.84849 984.834 -265.16363 981.0625 -264.75 C 977.50631 -264.35998 972.0569 -263.51084 970.8125 -262.84375 C 969.21381 -263.13793 966.95265 -263.36747 964.96875 -263.15625 C 961.91305 -262.83092 959.9947 -262.63001 958.0625 -262.4375 C 956.13031 -262.24499 956.37275 -261.99662 955.15625 -261.875 C 953.84137 -261.74353 953.3932 -262.03954 949.625 -261.59375 C 946.08611 -261.17509 940.6473 -260.30158 939.375 -259.625 C 937.77741 -259.90604 935.51505 -260.04543 933.53125 -259.8125 C 930.47927 -259.45413 928.58625 -259.24464 926.65625 -259.03125 C 926.00007 -258.95869 925.6156 -258.85856 925.3125 -258.78125 C 924.88571 -258.65402 924.6276 -258.51405 923.9375 -258.4375 C 922.62411 -258.29181 922.17015 -258.61152 918.40625 -258.125 C 914.85737 -257.66624 909.4276 -256.70598 908.1875 -256 C 906.59441 -256.24424 904.3537 -256.38135 902.375 -256.125 C 899.32741 -255.73018 897.4243 -255.47655 895.5 -255.21875 C 893.57571 -254.96096 893.7739 -254.72522 892.5625 -254.5625 C 891.25301 -254.3866 890.8153 -254.66688 887.0625 -254.09375 C 883.53821 -253.55551 878.1393 -252.39458 876.875 -251.65625 C 875.28751 -251.85979 873.0295 -251.91098 871.0625 -251.5625 C 868.03631 -251.02638 866.1636 -250.70081 864.25 -250.375 C 863.59941 -250.26423 863.2363 -250.10406 862.9375 -250 C 862.51681 -249.83512 862.27405 -249.6687 861.59375 -249.53125 C 860.29905 -249.26966 859.86665 -249.53745 856.15625 -248.71875 C 852.65777 -247.9468 847.31035 -246.33582 846.09375 -245.5 C 844.53085 -245.57745 842.33625 -245.41472 840.40625 -244.90625 C 837.43387 -244.12312 835.58855 -243.67416 833.71875 -243.15625 C 831.84875 -242.63835 832.0521 -242.38897 830.875 -242.0625 C 829.60251 -241.7096 829.17795 -241.95541 825.53125 -240.875 C 822.10657 -239.86037 816.88185 -237.94183 815.65625 -237.03125 C 814.11747 -237.01851 811.93645 -236.75903 810.03125 -236.15625 C 807.10027 -235.22891 805.2809 -234.69783 803.4375 -234.09375 C 802.81071 -233.88837 802.44585 -233.70117 802.15625 -233.5625 C 801.74867 -233.34889 801.50295 -233.15375 800.84375 -232.9375 C 799.58925 -232.52596 799.1576 -232.74846 795.5625 -231.5 C 792.17261 -230.32283 786.96755 -228.2863 785.78125 -227.34375 C 784.25737 -227.28408 782.1312 -226.94888 780.25 -226.28125 C 777.35261 -225.25296 775.55095 -224.60577 773.71875 -223.96875 C 771.88655 -223.33174 772.0909 -223.12021 770.9375 -222.71875 C 769.69071 -222.28479 769.27395 -222.51903 765.71875 -221.15625 C 762.38005 -219.87645 757.23165 -217.6737 756.03125 -216.6875 C 754.52407 -216.57981 752.39555 -216.1887 750.53125 -215.46875 C 747.66307 -214.36115 745.90735 -213.68719 744.09375 -213 C 743.47705 -212.76637 743.0973 -212.55797 742.8125 -212.40625 C 742.81251 -212.40625 742.8125 -212.37673 742.8125 -212.375 L 734.8125 -209.1875 L 736.625 -194.46875 C 736.36701 -194.52956 742.8125 -191.15625 742.8125 -191.15625 C 743.03891 -191.30093 743.26145 -191.42886 743.53125 -191.53125 C 744.61177 -191.94123 745.70285 -191.74702 749.53125 -193.21875 C 753.35977 -194.69049 754.7553 -195.22373 755.4375 -195.625 C 756.11711 -196.02478 757.04925 -196.50437 757.65625 -197.15625 C 759.48317 -197.294 761.22705 -197.64948 762.59375 -198.15625 C 765.56175 -199.25677 767.4691 -199.96244 769.375 -200.625 C 771.28081 -201.28754 771.72915 -202.03987 772.78125 -202.40625 C 773.87287 -202.78636 774.97635 -202.57163 778.84375 -203.9375 C 782.71115 -205.30336 784.1269 -205.76458 784.8125 -206.15625 C 785.51361 -206.55677 786.5133 -207.08923 787.125 -207.75 C 789.09581 -207.80466 790.94195 -208.13463 792.40625 -208.625 C 795.40777 -209.63008 797.3324 -210.24671 799.25 -210.875 C 800.78861 -211.3791 801.42415 -211.92177 802.15625 -212.3125 C 802.38647 -212.44681 802.63215 -212.56623 802.90625 -212.65625 C 804.00457 -213.01673 805.0877 -212.73762 809 -213.96875 C 812.91231 -215.19988 814.366 -215.6417 815.0625 -216 C 815.75641 -216.35697 816.6926 -216.79261 817.3125 -217.40625 C 819.17771 -217.42891 820.94835 -217.67308 822.34375 -218.09375 C 825.37415 -219.00729 827.33615 -219.52385 829.28125 -220.0625 C 831.22637 -220.60114 831.70745 -221.32702 832.78125 -221.625 C 833.89527 -221.93415 835.00125 -221.61761 838.96875 -222.65625 C 842.93625 -223.69488 844.38625 -224.08898 845.09375 -224.40625 C 845.82855 -224.73584 846.90765 -225.15997 847.53125 -225.78125 C 849.52907 -225.66525 851.3887 -225.80134 852.875 -226.15625 C 855.95311 -226.89125 857.9584 -227.25719 859.9375 -227.65625 C 861.52541 -227.97643 862.1818 -228.4468 862.9375 -228.75 C 863.17501 -228.8568 863.4044 -228.94276 863.6875 -229 C 864.82091 -229.22919 865.99215 -228.79107 870.03125 -229.5 C 874.07067 -230.20893 875.5315 -230.42709 876.25 -230.6875 C 876.96581 -230.94694 877.95435 -231.25474 878.59375 -231.78125 C 880.51795 -231.54176 882.34165 -231.55672 883.78125 -231.78125 C 886.90767 -232.26887 888.9358 -232.48192 890.9375 -232.75 C 892.93921 -233.01807 893.42625 -233.69514 894.53125 -233.84375 C 895.67767 -233.99793 896.8071 -233.54218 900.875 -234.0625 C 904.94281 -234.58282 906.43525 -234.75823 907.15625 -235 C 907.89337 -235.24714 908.95435 -235.58623 909.59375 -236.125 C 911.64375 -235.78947 913.56745 -235.72704 915.09375 -235.90625 C 918.23595 -236.27521 920.27375 -236.46561 922.28125 -236.6875 C 923.89207 -236.86552 924.5459 -237.2957 925.3125 -237.53125 C 925.55341 -237.61677 925.80655 -237.68685 926.09375 -237.71875 C 927.24345 -237.84647 928.39505 -237.3721 932.46875 -237.84375 C 936.54245 -238.3154 938.0278 -238.45435 938.75 -238.6875 C 939.46941 -238.91977 940.45025 -239.16096 941.09375 -239.65625 C 943.03005 -239.32279 944.8638 -239.25201 946.3125 -239.40625 C 949.45851 -239.7412 951.49 -239.92484 953.5 -240.125 C 955.50991 -240.32514 955.98415 -240.95139 957.09375 -241.0625 C 958.24485 -241.17778 959.39025 -240.69744 963.46875 -241.125 C 967.54725 -241.55256 969.05765 -241.68709 969.78125 -241.90625 C 970.52047 -242.13011 971.57685 -242.4195 972.21875 -242.9375 C 974.27575 -242.53883 976.2206 -242.4441 977.75 -242.59375 C 980.89871 -242.90185 982.9258 -243.067 984.9375 -243.25 C 986.55151 -243.39682 987.20055 -243.81055 987.96875 -244.03125 C 988.21005 -244.11211 988.4623 -244.16116 988.75 -244.1875 C 989.90211 -244.29295 991.0429 -243.79475 995.125 -244.1875 C 999.20711 -244.58025 1000.7139 -244.71834 1001.4375 -244.9375 C 1002.1584 -245.15583 1003.1371 -245.3852 1003.7812 -245.875 C 1005.7193 -245.52501 1007.5501 -245.42062 1009 -245.5625 C 1012.1487 -245.8706 1014.1758 -246.03575 1016.1875 -246.21875 C 1018.1991 -246.40174 1018.7017 -247.05677 1019.8125 -247.15625 C 1020.9648 -247.25948 1022.1047 -246.77142 1026.1875 -247.15625 C 1030.2704 -247.54107 1031.7762 -247.65725 1032.5 -247.875 C 1033.2393 -248.09743 1034.2956 -248.38949 1034.9375 -248.90625 C 1036.9949 -248.50448 1038.9404 -248.40292 1040.4688 -248.5625 C 1043.6153 -248.89102 1045.6458 -249.0852 1047.6562 -249.28125 C 1049.2692 -249.43854 1049.9219 -249.91273 1050.6875 -250.15625 C 1050.9282 -250.24429 1051.1507 -250.27762 1051.4375 -250.3125 C 1052.5858 -250.4522 1053.7542 -249.97259 1057.8125 -250.5625 C 1061.8708 -251.15242 1063.3743 -251.33964 1064.0938 -251.59375 C 1064.8104 -251.84691 1065.7684 -252.15182 1066.4062 -252.6875 C 1068.3259 -252.47556 1070.1262 -252.53609 1071.5625 -252.78125 C 1074.6816 -253.31365 1076.6741 -253.70986 1078.6562 -254.09375 C 1080.6383 -254.47762 1081.1305 -255.1334 1082.2188 -255.375 C 1083.3475 -255.62566 1084.489 -255.25871 1088.4688 -256.25 C 1092.4483 -257.24127 1093.8983 -257.6693 1094.5938 -258.03125 C 1095.316 -258.40725 1096.3555 -258.90183 1096.9688 -259.5625 C 1098.9317 -259.57454 1100.7625 -259.85355 1102.1875 -260.40625 C 1105.1387 -261.55085 1107.0607 -262.27567 1108.875 -263.15625 C 1110.3307 -263.86277 1111.1941 -264.85828 1111.4062 -265.15625 C 1111.6185 -265.4542 1111.5051 -265.8848 1111.5312 -265.90625 C 1111.5742 -265.94148 1111.8716 -266.00028 1112.0312 -266.34375 C 1112.8902 -268.19082 1114.3544 -271.97139 1114.4688 -272.65625 C 1114.5825 -273.33839 1114.6368 -274.00902 1114.6875 -274.40625 C 1114.7169 -274.63575 1114.5404 -275.28515 1114.5625 -275.34375 C 1114.5934 -275.42579 1114.8508 -275.59432 1114.9062 -275.84375 C 1115.1725 -277.04206 1114.9953 -278.05111 1114.7812 -279.46875 C 1114.5673 -280.88638 1113.8096 -284.08338 1113.1562 -284.9375 C 1112.4973 -285.79922 1111.9314 -285.94801 1111.4062 -285.9375 z "
+         style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+         id="path7423"
+         d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 736.625,-194.46875 C 736.36701,-194.52956 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z"
+         transform="translate(8.0045714e-2,-3.125e-2)" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter7578"
+       x="-0.08160872"
+       width="1.1632174"
+       y="-0.22659944"
+       height="1.4531989">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="2.437399"
+         id="feGaussianBlur7580" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7594"
+       x="-0.040804356"
+       width="1.0816087"
+       y="-0.11329972"
+       height="1.2265995">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.2186995"
+         id="feGaussianBlur7596" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath7606">
+      <path
+         id="path7608"
+         d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z"
+         style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter7610"
+       x="-0.021942979"
+       width="1.0438859"
+       y="-0.10017137"
+       height="1.2003427">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.57530213"
+         id="feGaussianBlur7612" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath7616">
+      <path
+         id="path7618"
+         d="M 205.47016,-408.97318 L 205.38003,-408.97164 C 203.9344,-408.18598 198.68082,-407.82829 198.10378,-399.93307 C 197.56244,-392.52754 211.88973,-381.83741 213.95811,-380.68826 C 215.62775,-379.76062 217.44286,-379.03275 219.23156,-378.59711 L 220.65023,-378.27877 C 222.5505,-377.93363 224.35065,-377.86862 225.80054,-378.01314 C 228.94914,-378.32698 230.9644,-378.58345 232.96843,-378.82834 C 234.97245,-379.07322 235.50913,-379.69312 236.61162,-379.85833 C 237.75504,-380.02976 238.86821,-379.58419 242.90739,-380.29586 C 246.94627,-381.00755 248.42246,-381.33354 249.14158,-381.64616 C 249.88822,-381.97095 250.95964,-382.39191 251.61747,-383.00826 C 253.57644,-382.88355 255.42223,-383.03435 256.88227,-383.48645 C 259.90603,-384.42272 261.87384,-385.01189 263.74507,-385.76396 C 265.24645,-386.36738 266.17709,-387.30032 266.40943,-387.58279 C 266.64197,-387.86524 266.55894,-388.30268 266.58637,-388.32227 C 266.63172,-388.35443 266.93259,-388.39235 267.11563,-388.72388 C 268.1012,-390.50664 269.82518,-394.17603 269.987,-394.85126 C 270.14794,-395.52383 270.24882,-396.18904 270.32707,-396.58177 C 270.37238,-396.80868 270.24154,-397.46878 270.26767,-397.5257 C 270.30421,-397.6054 270.57272,-397.75558 270.64536,-398.00055 C 270.99449,-399.17741 270.8881,-400.19633 270.77316,-401.62545 C 270.65853,-403.05454 270.12535,-406.29655 269.53303,-407.1941 C 269.15286,-407.77056 268.79088,-408.04035 268.44277,-408.17869 C 268.37703,-408.20061 268.32242,-408.23394 268.26007,-408.2541 C 268.2394,-408.25953 268.21826,-408.25387 268.19773,-408.25845 C 267.89214,-408.35547 267.60176,-408.45912 267.05957,-408.5572 C 266.084,-408.7337 264.65883,-408.98486 263.11782,-409.08304 C 262.60416,-409.11577 262.07992,-409.10775 261.55259,-409.09835 C 257.98058,-409.03472 252.49564,-408.73725 251.24552,-408.18907 C 249.63965,-408.63604 247.34955,-409.07483 245.35499,-409.07027 C 242.28304,-409.06325 240.37552,-409.07493 238.43292,-409.0837 C 236.49041,-409.09248 236.72384,-408.81345 235.50112,-408.81852 C 234.1792,-408.82401 233.73411,-409.16569 229.9455,-409.11245 C 226.38768,-409.06243 220.91754,-408.74723 219.63844,-408.20318 C 218.0323,-408.65065 215.74477,-409.08893 213.74801,-409.08436 C 210.67586,-409.07735 208.76626,-409.05786 206.82375,-409.06662 C 206.16316,-409.06961 205.77525,-409.0156 205.47016,-408.97318 z"
+         style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </clipPath>
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient7622"
+       id="linearGradient7708"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="translate(-19.091883,4.2426407)"
+       x1="774.97668"
+       y1="-211.87105"
+       x2="755.11584"
+       y2="-202.67865" />
+    <mask
+       maskUnits="userSpaceOnUse"
+       id="mask7704">
+      <path
+         style="fill:url(#linearGradient7708);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+         d="M 718.40812,-224.31217 L 751.65812,-168.31217 L 1027.6581,-192.31217 L 1187.1581,-240.56217 L 1120.6581,-323.31217 L 718.40812,-224.31217 z"
+         id="path7706" />
+    </mask>
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient8430"
+       id="radialGradient7904"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(-0.3324832,0.9022288,-0.9582407,-0.3531242,305.29227,19.909497)"
+       cx="142.95833"
+       cy="107.09234"
+       fx="142.95833"
+       fy="107.09234"
+       r="66.981766" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3317"
+       id="radialGradient7906"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-160.53487,-96.205369)"
+       cx="317.78754"
+       cy="129.65378"
+       fx="317.78754"
+       fy="129.65378"
+       r="47.863216" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient8398"
+       id="radialGradient7908"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-550.77432,-65.728909)"
+       cx="325.30847"
+       cy="80.909554"
+       fx="325.30847"
+       fy="80.909554"
+       r="26.937988" />
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8209">
+      <path
+         sodipodi:nodetypes="czcc"
+         id="path8211"
+         d="M 734.03125,519.49186 C 734.03125,519.49186 750.78638,556.50992 762.73266,573.44581 C 774.67895,590.3817 815.45982,629.49186 815.45982,629.49186 L 816.05699,490.90211"
+         style="opacity:1;fill:#1a1a1a;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter8225">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="10.661912"
+         id="feGaussianBlur8227" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8333">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="7.18"
+         id="feGaussianBlur8335" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8338">
+      <path
+         sodipodi:nodetypes="czzzzzzcccccccccczczz"
+         id="path8340"
+         d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z"
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter8354">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="6.82"
+         id="feGaussianBlur8356" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8359">
+      <path
+         sodipodi:nodetypes="czzzzzzcccccccccczczz"
+         id="path8361"
+         d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z"
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter8379"
+       x="-0.14413793"
+       width="1.288276"
+       y="-0.10278689"
+       height="1.2055738">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="7.389266"
+         id="feGaussianBlur8381" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8392">
+      <path
+         sodipodi:nodetypes="czzzzzzcccccccccczczz"
+         id="path8394"
+         d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter8404"
+       x="-0.090268657"
+       width="1.1805373"
+       y="-0.10250848"
+       height="1.205017">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="5.3457272"
+         id="feGaussianBlur8406" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8417">
+      <path
+         sodipodi:nodetypes="czzzzzzcccccccccczczz"
+         id="path8419"
+         d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </clipPath>
+  </defs>
+  <metadata
+     id="metadata7">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     inkscape:groupmode="layer"
+     id="layer1"
+     inkscape:label="Shadow">
+    <path
+       style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter11361);enable-background:new"
+       d="M 304.64285,526.6479 C 294.64285,527.00505 286.42857,529.50504 286.42857,529.50504 L 293.92857,535.57647 L 304.28571,539.1479 L 320.35714,539.50504 L 342.85714,534.1479 L 350.71428,535.21933 L 371.07143,533.07647 L 360.71428,539.86219 C 366.17351,538.83858 378.10757,543.4313 370.35714,545.21933 C 368.61714,545.62075 384.28571,540.57648 384.28571,540.57648 L 386.78571,535.93361 L 390.35714,526.6479 L 401.78571,526.6479 L 419.99999,522.00504 L 423.57143,517.00505 L 407.49999,518.07647 L 395.35714,520.21933 L 380.71428,515.21933 L 310.02218,531.92707 L 304.64285,526.6479 z"
+       id="path10326"
+       sodipodi:nodetypes="cccccccccsccccccccccc"
+       transform="matrix(10.726753,0,0,10.726753,-2882.1235,-4565.4583)"
+       inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_new.png"
+       inkscape:export-xdpi="142.10527"
+       inkscape:export-ydpi="142.10527" />
+  </g>
+  <g
+     inkscape:groupmode="layer"
+     id="layer20"
+     inkscape:label="New Ear">
+    <g
+       style="opacity:1;display:inline;enable-background:new"
+       id="g7882"
+       transform="matrix(0.71084,-0.1937433,0.262963,0.9648058,503.68027,136.48399)">
+      <path
+         sodipodi:nodetypes="czzzzcc"
+         id="path7876"
+         d="M 245.12255,100.05344 C 245.12255,100.05344 197.99444,68.406519 177.9079,64.252501 C 157.86998,60.108538 139.435,60.934923 125.97426,77.859824 C 112.51352,94.784725 113.89687,139.12502 112.43872,164.82937 C 110.98057,190.53372 114.98817,235.00638 130.04332,253.49489 C 145.09848,271.98339 175.92966,267.07991 179.97027,274.90859 C 182.1831,279.19595 245.12255,100.05344 245.12255,100.05344 z"
+         style="opacity:1;fill:url(#radialGradient7904);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+      <path
+         sodipodi:nodetypes="czzzzzc"
+         id="path7878"
+         d="M 135.37935,82.017807 C 135.37935,82.017807 161.7229,83.95659 173.01242,95.920995 C 184.42736,108.01833 186.74699,117.25251 188.30828,133.65558 C 189.87165,150.08057 187.45871,162.0737 180.49446,169.69292 C 173.53021,177.31214 179.49017,189.27624 154.57841,181.76399 C 129.66665,174.25174 127.54617,153.98101 128.06318,135.45924 C 128.58039,116.93026 135.37935,82.017807 135.37935,82.017807 z"
+         style="opacity:1;fill:url(#radialGradient7906);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+      <path
+         sodipodi:nodetypes="czccssc"
+         id="path7880"
+         d="M 135.648,81.927211 C 135.648,81.927211 131.00335,98.292286 136.23625,110.49031 C 141.72419,123.28285 163.4605,154.75038 163.4605,165.14596 L 186.11675,160.14596 C 188.65893,153.17952 189.32727,144.3939 188.30425,133.64596 C 186.74296,117.24289 184.43795,108.02455 173.023,95.927211 C 163.36812,85.695164 141.42989,82.552354 135.648,81.927211 z"
+         style="opacity:1;fill:url(#radialGradient7908);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </g>
+  </g>
+  <g
+     inkscape:groupmode="layer"
+     id="layer21"
+     inkscape:label="Rendered2"
+     style="display:inline">
+    <path
+       style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 845.03125,1154.7776 C 840.74554,1155.4919 817.4031,1158.3957 787.17411,1164.7776 C 756.94512,1171.1595 729.86016,1169.7437 651.38803,1182.1072 C 571.53625,1194.688 557.32367,1224.6495 543.26578,1229.1715 C 528.56564,1233.9001 397.88839,1163.349 397.88839,1163.349 L 402.17411,1069.0633 C 402.17411,1069.0633 488.05962,1052.8624 514.31696,1035.4919 C 540.57431,1018.1214 559.89934,985.82588 573.60268,964.06329 C 587.30602,942.3007 606.45982,892.63471 606.45982,892.63471 L 845.03125,1154.7776 z"
+       id="path7917"
+       sodipodi:nodetypes="czzzcczzcc" />
+    <path
+       style="opacity:0.5;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8888);enable-background:accumulate"
+       d="M 332.34019,898.38549 L 299.60838,837.08593 L 261.99104,882.19239 C 264.16779,883.5095 267.76529,861.33636 307.59144,817.77531 L 332.34019,898.38549 z"
+       id="path7919"
+       clip-path="url(#clipPath8658)"
+       sodipodi:nodetypes="ccccc"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:1;fill:url(#linearGradient2841);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8892);enable-background:accumulate"
+       d="M 200.81833,863.03015 L 347.18943,811.41136 L 591.14127,1037.6855 L 349.31075,1177.6927 L 168.29141,1090.0114 L 200.81833,863.03015 z"
+       id="path7923"
+       clip-path="url(#clipPath2833)"
+       sodipodi:nodetypes="cccccc"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 642.88839,640.13471 C 642.88839,640.13471 613.33433,680.70776 595.03125,714.42042 C 576.72816,748.13309 536.41016,840.77736 524.67411,885.49185 C 512.91471,930.29529 462.17411,1009.0633 462.17411,1009.0633 L 538.24554,1027.2776 C 538.24554,1027.2776 550.05266,1014.4542 569.31696,981.20614 C 588.58126,947.95806 629.67411,842.63471 629.67411,842.63471 L 642.88839,640.13471 z"
+       id="path7921"
+       sodipodi:nodetypes="czzcczcc" />
+    <path
+       style="opacity:0.4;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8856);enable-background:accumulate"
+       d="M 430.28131,381.94122 C 423.21025,384.76965 194.10007,414.09303 194.10007,414.09303 L 154.46046,773.92607 L 244.65895,866.56568 L 296.98485,752.01438 L 397.45289,565.62246 L 430.28131,381.94122 z"
+       id="path7925"
+       sodipodi:nodetypes="ccccccc"
+       clip-path="url(#clipPath3665)"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 969.67051,1164.0346 C 969.67051,1164.0346 992.92679,1175.4283 1005.7383,1184.5107 C 1018.4357,1193.5122 1035.2107,1209.1598 1047.4307,1221.8712 C 1059.7362,1234.6714 1067.5434,1244.4699 1088.9634,1246.032 C 1110.3956,1247.5949 1142.2458,1237.2444 1162.2594,1221.3678 C 1182.2729,1205.4912 1207.9063,1152.135 1207.9063,1152.135 L 1080.7455,1009.0633"
+       id="path7927"
+       sodipodi:nodetypes="czzzzcc" />
+    <path
+       style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8860);enable-background:accumulate"
+       d="M 331.34019,641.50471 L 216.17367,835.36467 L 260.2153,925.96265 L 357.79603,732.21539 L 331.34019,641.50471 z"
+       id="path7929"
+       clip-path="url(#clipPath8642)"
+       sodipodi:nodetypes="ccccc"
+       transform="translate(276,136)" />
+    <g
+       style="opacity:1;display:inline;enable-background:new"
+       id="g7931"
+       transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
+       inkscape:transform-center-x="-347.89063"
+       inkscape:transform-center-y="-28.255779">
+      <path
+         style="opacity:1;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+         d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z"
+         id="path7933" />
+      <g
+         clip-path="url(#clipPath7616)"
+         style="display:inline;filter:url(#filter7610);enable-background:new"
+         id="g7935"
+         transform="matrix(0.9975712,-6.9654277e-2,6.9654277e-2,0.9975712,872.72062,140.02502)">
+        <path
+           sodipodi:nodetypes="ccssscsssscscsscsssccscssccsscssscc"
+           id="path7937"
+           d="M 229.94262,-409.12268 C 226.38481,-409.07267 220.91842,-408.76259 219.63928,-408.21854 C 218.03319,-408.66601 215.73612,-409.09985 213.73933,-409.09528 C 210.66734,-409.08826 208.77464,-409.08651 206.83206,-409.09528 C 206.17159,-409.09827 205.78447,-409.02811 205.47939,-408.98569 C 205.47939,-408.98569 205.47939,-407.88976 205.47939,-407.88976 C 205.59911,-408.06923 205.87191,-408.58022 206.42914,-408.65691 C 207.17672,-408.7598 211.59842,-408.80814 213.73933,-408.76651 C 215.51393,-408.73198 218.19456,-408.49224 220.12854,-407.80756 C 220.44994,-407.69378 220.74779,-407.53378 221.02073,-407.39659 C 222.98415,-406.40966 228.96409,-403.09505 228.96409,-403.09505 C 228.96409,-403.09505 222.33134,-407.04273 221.48122,-407.53358 C 221.27791,-407.65097 220.90658,-407.79127 220.44513,-407.94456 C 221.66576,-408.39235 225.5211,-408.56427 228.27336,-408.65691 C 231.29786,-408.75873 231.62112,-408.7465 233.68405,-408.46512 C 235.81336,-408.17469 237.02256,-407.86236 237.02256,-407.86236 C 237.02255,-407.86236 236.9442,-408.50354 238.05865,-408.65691 C 238.80622,-408.7598 243.22794,-408.80814 245.36884,-408.76651 C 247.43834,-408.72625 250.73489,-408.35935 252.65024,-407.39659 C 253.65356,-406.89226 255.68588,-405.82796 257.44559,-404.86088 L 257.5412,-404.88031 C 257.5412,-404.88031 253.96086,-407.04273 253.11073,-407.53358 C 252.90742,-407.65097 252.5361,-407.79127 252.07464,-407.94456 C 253.29526,-408.39235 257.12183,-408.56427 259.87409,-408.65691 C 262.89859,-408.75873 263.22184,-408.7465 265.28478,-408.46512 C 267.23794,-408.19872 268.2977,-407.93506 268.47939,-407.88976 C 268.47939,-407.88976 268.4523,-408.20122 268.4523,-408.20122 C 268.04327,-408.33767 267.73806,-408.43457 267.05192,-408.5587 C 265.75111,-408.79403 263.6528,-409.16026 261.54335,-409.12268 C 257.9714,-409.05904 252.49007,-408.76672 251.24001,-408.21854 C 249.63418,-408.66549 247.36339,-409.09984 245.36884,-409.09528 C 242.29685,-409.08826 240.37536,-409.08651 238.43279,-409.09528 C 236.49023,-409.10406 236.72011,-408.81621 235.49721,-408.8213 C 234.1753,-408.8268 233.73109,-409.17593 229.94262,-409.12268 C 229.94262,-409.12268 229.94262,-409.12268 229.94262,-409.12268"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+        <path
+           id="path7939"
+           d="M 206.1989,-407.47878 C 208.11911,-406.66172 210.77605,-405.28595 212.35787,-404.08139 C 213.93971,-402.87683 215.26544,-402.30771 217.91246,-400.16344 C 218.79803,-399.44606 219.66111,-398.81359 220.50439,-398.2417 L 221.04496,-398.43181 C 220.33173,-398.9152 219.5772,-399.45212 218.77587,-400.05384 C 215.95364,-402.17305 215.14932,-402.86357 212.7608,-404.32798 C 210.37226,-405.79238 208.66132,-406.69374 206.1989,-407.47878 C 206.1989,-407.47878 206.1989,-407.47878 206.1989,-407.47878"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+           sodipodi:nodetypes="cssccsscc" />
+        <path
+           id="path7941"
+           d="M 237.79963,-407.47878 C 239.71984,-406.66172 242.40557,-405.28595 243.98738,-404.08139 C 244.80045,-403.46223 245.54587,-403.01097 246.43784,-402.42738 L 247.08684,-402.54404 C 246.28853,-403.12041 245.51507,-403.63839 244.39031,-404.32798 C 242.00177,-405.79238 240.26205,-406.69374 237.79963,-407.47878 C 237.79963,-407.47878 237.79963,-407.47878 237.79963,-407.47878"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+           sodipodi:nodetypes="csccscc" />
+      </g>
+      <g
+         clip-path="url(#clipPath7606)"
+         id="g7943">
+        <path
+           style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7578);enable-background:new"
+           d="M 1056.25,-278.80481 C 1060.3946,-280.28358 1066.25,-275.67981 1066.25,-275.67981 C 1067.149,-275.39889 1068.9751,-276.57428 1068.8743,-277.36595 C 1068.8743,-277.36595 1067.324,-279.22657 1068.5,-280.30481 C 1069.676,-281.38305 1073.796,-278.79743 1076,-278.67981 C 1078.204,-278.56219 1081.5621,-278.90922 1083,-279.42981 C 1084.4379,-279.9504 1084.1129,-280.8544 1085.625,-281.17981 C 1087.1371,-281.50522 1090.7439,-280.14227 1092.6855,-280.01098 C 1094.6271,-279.87969 1097.3336,-279.67671 1098.5,-280.17981 C 1099.6664,-280.68291 1098.6782,-281.33902 1100.375,-282.05481 C 1102.0718,-282.7706 1108.1352,-283.01143 1110,-282.17981 C 1111.8648,-281.34819 1111.8099,-281.66061 1112.625,-279.17981 C 1113.4401,-276.69901 1120.0648,-274.01696 1111.5,-265.80481 C 1102.9352,-257.59266 1052.1221,-252.01887 1045.875,-263.05481 C 1039.6279,-274.09075 1052.1054,-277.32604 1056.25,-278.80481 z"
+           id="path7945"
+           sodipodi:nodetypes="czzzzzzzzzzzzzz" />
+        <path
+           style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7594);enable-background:new"
+           d="M 1058.5,-275.42981 C 1062.6446,-276.90858 1068.5,-272.30481 1068.5,-272.30481 C 1069.399,-272.02389 1071.2251,-273.19928 1071.1243,-273.99095 C 1071.1243,-273.99095 1069.574,-275.85157 1070.75,-276.92981 C 1071.926,-278.00805 1076.046,-275.42243 1078.25,-275.30481 C 1080.454,-275.18719 1083.8121,-275.53422 1085.25,-276.05481 C 1086.6879,-276.5754 1086.3629,-277.4794 1087.875,-277.80481 C 1089.3871,-278.13022 1092.9939,-276.76727 1094.9355,-276.63598 C 1096.8771,-276.50469 1099.5836,-276.30171 1100.75,-276.80481 C 1101.9164,-277.30791 1100.9282,-277.96402 1102.625,-278.67981 C 1104.3218,-279.3956 1110.3852,-279.63643 1112.25,-278.80481 C 1114.1148,-277.97319 1114.0599,-278.28561 1114.875,-275.80481 C 1115.6901,-273.32401 1122.3148,-270.64196 1113.75,-262.42981 C 1105.1852,-254.21766 1054.3721,-248.64387 1048.125,-259.67981 C 1041.8779,-270.71575 1054.3554,-273.95104 1058.5,-275.42981 z"
+           id="path7947"
+           sodipodi:nodetypes="czzzzzzzzzzzzzz" />
+      </g>
+    </g>
+    <path
+       style="opacity:1;fill:#101414;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 628.24553,347.99185 C 624.4411,322.72762 611.43581,297.35383 611.08873,272.46662 C 610.90247,259.1111 614.36158,245.89571 624.84426,232.91257 C 661.19128,167.61674 741.78517,148.21789 810.77892,141.44715 C 897.70131,130.43035 995.69159,159.38722 1044.1503,236.84843 C 1098.2743,312.58173 1100.825,409.38755 1124.7623,496.37638 C 1154.2001,623.50398 1179.5414,752.59052 1185.1545,883.22673 C 1182.0911,961.40858 1176.7282,1048.4109 1124.6513,1111.3609 C 1076.6248,1161.7183 1001.8649,1161.4139 937.58145,1170.3632 C 847.02606,1175.0182 753.22992,1154.2174 675.79755,1106.165 C 611.02191,1068.225 580.06736,992.68633 578.51815,920.14538 C 570.12898,840.27022 604.90967,766.33687 630.13855,692.98577 C 637.60916,610.2247 639.55141,526.73802 639.79189,443.60093 C 638.95507,411.40549 632.70236,379.7836 628.24553,347.99185 z"
+       id="path7949"
+       sodipodi:nodetypes="cscccccccccccc" />
+    <path
+       style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8940);enable-background:accumulate"
+       d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 312.95049,822.27485 312.31937,776.11489 C 311.68792,729.93044 323.14971,667.50703 342.99704,617.81842 C 363.04539,567.62654 379.89378,572.972 385.12193,525.22549 C 390.35008,477.47898 367.69553,375.83357 367.69553,375.83357 L 311.83409,415.43155 z"
+       id="path7951"
+       sodipodi:nodetypes="ccccczzzcc"
+       clip-path="url(#clipPath8616)"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:1;fill:url(#linearGradient8970);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 1010.0312,655.49186 C 1010.0312,655.49186 1026.7864,692.50992 1038.7327,709.44581 C 1050.6789,726.3817 1091.4598,765.49186 1091.4598,765.49186 L 1144.057,637.90211"
+       id="path7953"
+       sodipodi:nodetypes="czcc" />
+    <path
+       style="opacity:0.07999998;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8822);enable-background:accumulate"
+       d="M 730.31998,536.56864 C 730.31998,545.05392 772.86772,595.03667 772.86772,595.03667 L 785.47431,566.26713 L 730.31998,536.56864 z"
+       id="path7955"
+       sodipodi:nodetypes="cccc"
+       clip-path="url(#clipPath8209)"
+       transform="translate(276,136)" />
+    <g
+       transform="translate(450.03125,73.843964)"
+       style="opacity:1;display:inline;enable-background:new"
+       id="g7957"
+       clip-path="url(#clipPath3998)">
+      <g
+         transform="translate(-174.03125,62.156036)"
+         style="filter:url(#filter3677)"
+         id="g7959">
+        <g
+           id="g7961"
+           style="filter:url(#filter3785)">
+          <path
+             sodipodi:nodetypes="czzzzzzzzzz"
+             id="path7963"
+             d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z"
+             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <rect
+             y="412.60312"
+             x="343.6539"
+             height="181.01935"
+             width="381.83765"
+             id="rect7965"
+             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+        </g>
+        <g
+           id="g7967"
+           style="filter:url(#filter3785)">
+          <path
+             sodipodi:nodetypes="czzzcc"
+             id="path7969"
+             d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z"
+             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+             transform="translate(174.03125,-62.156036)" />
+          <rect
+             y="344.82138"
+             x="702.86414"
+             height="162.63455"
+             width="207.8894"
+             id="rect7971"
+             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+        </g>
+      </g>
+      <g
+         transform="translate(-174.03125,62.156036)"
+         style="opacity:0.18000004;display:inline;enable-background:new"
+         id="g7973">
+        <g
+           id="g7975"
+           style="filter:url(#filter3785)">
+          <path
+             sodipodi:nodetypes="czzzzzzzzzz"
+             id="path7977"
+             d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z"
+             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <rect
+             y="412.60312"
+             x="343.6539"
+             height="181.01935"
+             width="381.83765"
+             id="rect7979"
+             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+        </g>
+        <g
+           id="g7981"
+           style="filter:url(#filter3785)">
+          <path
+             sodipodi:nodetypes="czzzcc"
+             id="path7983"
+             d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z"
+             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+             transform="translate(174.03125,-62.156036)" />
+          <rect
+             y="344.82138"
+             x="702.86414"
+             height="162.63455"
+             width="207.8894"
+             id="rect7985"
+             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+        </g>
+      </g>
+    </g>
+    <path
+       style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8802);enable-background:accumulate"
+       d="M 582.65599,-7.4183011 L 695.79307,78.848726 L 804.68752,337.64981 L 842.87128,545.5392 L 963.07944,637.46308 C 963.07944,637.46308 950.35151,350.37773 943.28044,323.50767 C 936.20938,296.63761 793.37381,-69.643698 793.37381,-69.643698 L 582.65599,-7.4183011 z"
+       id="path7987"
+       clip-path="url(#clipPath8604)"
+       sodipodi:nodetypes="cccccscc"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:1;fill:url(#linearGradient8958);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 964.13839,239.599 C 964.13839,239.599 972.81571,250.49562 988.24554,251.56328 C 1003.6754,252.63094 1037.9672,211.61061 1058.4241,199.42043 C 1078.9034,187.2169 1105.4705,172.81818 1122.3527,179.06329 C 1139.2348,185.30839 1144.5105,205.49938 1150.2098,227.099 C 1155.9092,248.69861 1156.9284,288.91289 1147.5313,319.95615 C 1138.1341,350.9994 1097.028,393.0599 1082.1741,423.349 C 1067.3202,453.6381 1070.567,463.17043 1070.567,463.17043"
+       id="path7989"
+       sodipodi:nodetypes="czzzzzzc" />
+    <path
+       style="opacity:1;fill:url(#radialGradient3315);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 1124.4955,207.63471 C 1108.6027,206.74185 1074.7767,219.74054 1058.4241,231.92043 C 1041.9855,244.16433 1029.2032,256.03483 1029.1384,284.06328 C 1029.0732,312.26932 1042.2575,323.13969 1058.2455,331.02757 C 1074.2335,338.91546 1091.9317,338.14685 1110.2098,319.24186 C 1128.488,300.33686 1124.4955,207.63471 1124.4955,207.63471 z"
+       id="path7991"
+       sodipodi:nodetypes="czzzzc" />
+    <path
+       sodipodi:type="arc"
+       style="opacity:0.75;fill:url(#radialGradient3543);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4120);enable-background:accumulate"
+       id="path7993"
+       sodipodi:cx="385"
+       sodipodi:cy="237.00504"
+       sodipodi:rx="86.428574"
+       sodipodi:ry="73.928574"
+       d="M 471.42857,237.00504 A 86.428574,73.928574 0 1 1 298.57143,237.00504 A 86.428574,73.928574 0 1 1 471.42857,237.00504 z"
+       transform="matrix(0.9434749,-0.1239943,0.1440089,1.0957669,451.94827,134.5988)"
+       clip-path="url(#clipPath4100)" />
+    <path
+       transform="translate(450.03125,73.843964)"
+       style="opacity:1;fill:url(#radialGradient3915);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 527.60588,407.44884 C 527.60588,407.44884 405.56444,445.85232 340.09154,417.08065 C 274.61865,388.30899 265.71429,292.36218 265.71429,292.36218 C 265.71429,292.36218 339.09587,211.85825 395.63507,208.74742 C 451.46212,205.67578 486.20893,228.89074 510.50508,274.59913 C 534.85708,320.41261 527.60588,407.44884 527.60588,407.44884 z"
+       id="path7995"
+       sodipodi:nodetypes="csczzc"
+       mask="url(#mask3684)" />
+    <path
+       style="opacity:1;fill:url(#linearGradient3959);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 772.17411,393.349 C 772.17411,393.349 808.39165,365.96653 823.78125,357.45614 C 838.95859,349.06313 849.49553,345.849 859.6741,345.849 L 844.13839,412.81328"
+       id="path7997"
+       sodipodi:nodetypes="czcc" />
+    <path
+       sodipodi:type="arc"
+       style="opacity:1;fill:url(#radialGradient3933);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       id="path7999"
+       sodipodi:cx="409.28571"
+       sodipodi:cy="306.64789"
+       sodipodi:rx="36.25"
+       sodipodi:ry="36.25"
+       d="M 445.53571,306.64789 A 36.25,36.25 0 1 1 373.03571,306.64789 A 36.25,36.25 0 1 1 445.53571,306.64789 z"
+       transform="translate(449.49554,74.915393)" />
+    <path
+       style="opacity:0.3;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8806);enable-background:accumulate"
+       d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 360.24362,892.86709 320.31937,742.11489 L 337.99704,672.81842 L 410.12193,534.22549 L 367.69553,375.83357 L 311.83409,415.43155 z"
+       id="path8001"
+       sodipodi:nodetypes="cccccccccc"
+       clip-path="url(#clipPath8616)"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8826);enable-background:accumulate"
+       d="M 635.21025,581.13004 C 621.06811,593.85796 674.44372,615.71019 711.57778,605.17167 C 748.71184,594.63315 816.22265,569.6073 814.81537,525.97571 C 813.40809,482.34413 738.44784,397.28228 738.44784,397.28228 L 635.21025,581.13004 z"
+       id="path8003"
+       sodipodi:nodetypes="czzcc" />
+    <path
+       sodipodi:type="arc"
+       style="opacity:1;fill:url(#radialGradient3991);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       id="path8005"
+       sodipodi:cx="410"
+       sodipodi:cy="306.64789"
+       sodipodi:rx="23.214285"
+       sodipodi:ry="23.214285"
+       d="M 433.21428,306.64789 A 23.214285,23.214285 0 1 1 386.78572,306.64789 A 23.214285,23.214285 0 1 1 433.21428,306.64789 z"
+       transform="translate(449.67411,74.915393)" />
+    <path
+       sodipodi:type="arc"
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3981);enable-background:accumulate"
+       id="path8007"
+       sodipodi:cx="414.28571"
+       sodipodi:cy="303.07648"
+       sodipodi:rx="7.5"
+       sodipodi:ry="7.5"
+       d="M 421.78571,303.07648 A 7.5,7.5 0 1 1 406.78571,303.07648 A 7.5,7.5 0 1 1 421.78571,303.07648 z"
+       transform="translate(451.99554,73.486821)" />
+    <path
+       style="opacity:1;fill:url(#radialGradient4112);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 789.31696,478.349 C 789.31696,478.349 796.33977,497.91759 788.24553,513.349 C 780.15129,528.78041 745.92236,552.33722 720.74554,563.349 C 695.43582,574.41891 635.27254,596.31293 618.95982,605.31328 C 602.49834,614.39571 600.74554,617.99185 600.74554,617.99185 C 600.74554,617.99185 593.59861,598.92744 629.49553,566.20615 C 665.66764,533.23401 771.52265,518.15665 789.31696,478.349 z"
+       id="path8009"
+       sodipodi:nodetypes="czzzczc" />
+    <g
+       style="opacity:1;display:inline;enable-background:new"
+       id="g8011"
+       transform="translate(780.74553,74.55825)">
+      <path
+         transform="translate(-329.81481,0)"
+         clip-path="url(#clipPath3999)"
+         sodipodi:nodetypes="czzczzzszc"
+         id="path8013"
+         d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z"
+         style="opacity:1;fill:url(#radialGradient3585);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline" />
+      <path
+         transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-166.62245,2.387362)"
+         d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z"
+         sodipodi:ry="134.00607"
+         sodipodi:rx="64.715881"
+         sodipodi:cy="338.07648"
+         sodipodi:cx="183.57143"
+         id="path8015"
+         style="opacity:1;fill:url(#radialGradient4060);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         sodipodi:type="arc" />
+      <path
+         transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-162.19388,-18.755495)"
+         d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z"
+         sodipodi:ry="134.00607"
+         sodipodi:rx="64.715881"
+         sodipodi:cy="338.07648"
+         sodipodi:cx="183.57143"
+         id="path8017"
+         style="opacity:1;fill:url(#radialGradient4062);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         sodipodi:type="arc" />
+      <path
+         transform="translate(-329.81481,3e-7)"
+         clip-path="url(#clipPath3999)"
+         sodipodi:nodetypes="czzczzzszc"
+         id="path8019"
+         d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z"
+         style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient3587);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4079);enable-background:new" />
+    </g>
+    <path
+       sodipodi:type="arc"
+       style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       id="path8021"
+       sodipodi:cx="310.71429"
+       sodipodi:cy="398.07648"
+       sodipodi:rx="19.704132"
+       sodipodi:ry="19.704132"
+       d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
+       transform="translate(452.55663,72.581273)" />
+    <path
+       sodipodi:type="arc"
+       style="opacity:1;fill:url(#radialGradient4056);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4082);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4083);enable-background:accumulate"
+       id="path8023"
+       sodipodi:cx="310.71429"
+       sodipodi:cy="398.07648"
+       sodipodi:rx="19.704132"
+       sodipodi:ry="19.704132"
+       d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
+       transform="translate(450.55663,72.581273)" />
+    <path
+       sodipodi:type="arc"
+       style="opacity:1;fill:url(#radialGradient4119);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       id="path8025"
+       sodipodi:cx="310.71429"
+       sodipodi:cy="398.07648"
+       sodipodi:rx="19.704132"
+       sodipodi:ry="19.704132"
+       d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
+       transform="translate(450.55663,72.581273)" />
+    <path
+       sodipodi:type="arc"
+       style="opacity:1;fill:url(#radialGradient4868);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4002);enable-background:accumulate"
+       id="path8027"
+       sodipodi:cx="429.56738"
+       sodipodi:cy="377.42877"
+       sodipodi:rx="72.079735"
+       sodipodi:ry="44.547726"
+       d="M 501.64712,377.42877 A 72.079735,44.547726 0 1 1 357.48765,377.42877 A 72.079735,44.547726 0 1 1 501.64712,377.42877 z"
+       transform="matrix(0.9969564,-7.7961675e-2,7.7961675e-2,0.9969564,436.61877,125.29509)"
+       inkscape:transform-center-x="-47.231976"
+       inkscape:transform-center-y="-3.6935079" />
+    <path
+       sodipodi:type="arc"
+       style="opacity:1;fill:url(#radialGradient4876);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4010);enable-background:accumulate"
+       id="path8029"
+       sodipodi:cx="437.6991"
+       sodipodi:cy="391.21735"
+       sodipodi:rx="36.611931"
+       sodipodi:ry="22.627417"
+       d="M 474.31103,391.21735 A 36.611931,22.627417 0 1 1 401.08717,391.21735 A 36.611931,22.627417 0 1 1 474.31103,391.21735 z"
+       transform="matrix(1.4357951,-6.9991037e-2,6.9991037e-2,1.4357951,235.18065,-63.86546)"
+       inkscape:transform-center-x="-20.955902"
+       inkscape:transform-center-y="-13.056625" />
+    <g
+       transform="translate(450.03125,73.843964)"
+       id="g8031"
+       style="opacity:1;display:inline;filter:url(#filter4053);enable-background:new">
+      <path
+         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+         sodipodi:ry="3.2142856"
+         sodipodi:rx="3.2142856"
+         sodipodi:cy="401.82648"
+         sodipodi:cx="413.66071"
+         id="path8033"
+         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4484);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         sodipodi:type="arc" />
+      <path
+         transform="translate(13.125009,8.1249913)"
+         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+         sodipodi:ry="3.2142856"
+         sodipodi:rx="3.2142856"
+         sodipodi:cy="401.82648"
+         sodipodi:cx="413.66071"
+         id="path8035"
+         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4486);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         sodipodi:type="arc" />
+      <path
+         transform="translate(32.946437,7.4999913)"
+         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+         sodipodi:ry="3.2142856"
+         sodipodi:rx="3.2142856"
+         sodipodi:cy="401.82648"
+         sodipodi:cx="413.66071"
+         id="path8037"
+         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4488);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         sodipodi:type="arc" />
+      <path
+         transform="translate(24.910723,-10.267866)"
+         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+         sodipodi:ry="3.2142856"
+         sodipodi:rx="3.2142856"
+         sodipodi:cy="401.82648"
+         sodipodi:cx="413.66071"
+         id="path8039"
+         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4490);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         sodipodi:type="arc" />
+      <path
+         transform="translate(47.589294,-0.6250087)"
+         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+         sodipodi:ry="3.2142856"
+         sodipodi:rx="3.2142856"
+         sodipodi:cy="401.82648"
+         sodipodi:cx="413.66071"
+         id="path8041"
+         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4492);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         sodipodi:type="arc" />
+    </g>
+    <path
+       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 896.20301,482.92837 C 897.1881,487.27845 900.74008,489.10785 903.58974,490.82019 C 908.05042,493.33311 910.1099,492.3423 912.74425,490.06258 C 914.3462,488.14141 923.42736,485.36393 928.33848,482.99151 C 932.66809,481.5326 937.24178,477.63278 941.723,474.65775 C 945.11814,473.03051 947.06964,475.01239 949.55168,475.6679 C 952.4958,476.38451 953.96285,477.83965 955.6126,479.20344 C 958.00876,480.37863 954.6847,482.34657 958.8956,483.49658 C 960.08651,483.71452 961.31255,484.07303 962.17859,482.99151"
+       id="path8043"
+       sodipodi:nodetypes="ccccccccc" />
+    <path
+       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 910.85021,475.35223 C 913.16515,475.32025 914.02799,475.99476 916.34292,474.53148 C 919.79856,471.45035 921.74546,471.38671 924.29787,470.11206 C 927.32444,468.79683 930.83357,478.26375 934.3994,479.96105 C 936.79449,479.13963 935.68854,481.75484 935.85149,482.6127 C 935.90862,485.25954 938.65843,486.29076 940.20777,488.04227 C 943.52381,490.29776 947.583,494.33773 951.31945,493.34557 C 957.7647,490.4145 961.59867,492.06411 967.60816,485.95883 C 968.31221,484.77749 967.02391,479.06423 970.70175,478.76149 C 973.22574,479.01487 974.86842,478.81164 976.76267,479.32971 C 982.20367,481.4469 984.50045,485.77971 991.47301,487.28466 C 997.65591,488.25105 999.08565,491.07892 1005.3626,492.33542"
+       id="path8045"
+       sodipodi:nodetypes="cccccccccccc" />
+    <path
+       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 876.98133,483.52197 C 879.37991,482.72817 883.08746,487.71407 885.15446,490.56765 C 885.74727,493.24717 886.30823,496.0541 885.91207,502.68948 C 886.6972,505.10702 888.59256,505.72043 890.7103,505.97248 C 893.82775,505.4357 896.58699,504.64818 898.0339,502.94202 C 899.9055,501.00035 903.34643,505.33596 906.11512,506.98263 C 909.72521,508.89472 913.8889,508.96149 917.98442,509.25547 C 919.688,509.02483 920.35482,513.77062 921.26741,517.3367 C 921.65155,521.71476 920.38197,524.23239 919.49965,527.18568 C 919.20535,529.68223 922.48815,530.71542 925.8131,531.73137 C 928.99554,532.47261 932.35734,533.39321 934.90447,533.49914 C 940.04633,534.37405 942.99321,536.18966 947.0263,537.53975 C 949.26544,538.3563 950.28649,539.78191 951.57199,541.07528"
+       id="path8047"
+       sodipodi:nodetypes="ccccccccccccc" />
+    <path
+       style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter8814);enable-background:new"
+       d="M 332,187.69519 C 332,187.69519 389.5,162.19519 389.5,159.69519 C 389.5,157.19519 395,107.69519 395,107.69519 C 395,107.69519 486,59.195189 486.5,57.195189 C 487,55.195189 572.5,-4.8048114 572.5,-4.8048114 L 386.5,17.195189 L 311,123.19519 L 332,187.69519 z"
+       id="path8049"
+       clip-path="url(#clipPath8514)"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 1697.2846,722.5514 C 1697.2846,722.5514 1581.3191,796.0905 1574.2481,800.33314 C 1567.177,804.57578 1343.7312,937.51186 1343.7312,937.51186 L 1347.9739,977.10984 L 1564.3486,876.70067 L 1681.7283,774.8773 L 1697.2846,722.5514 z"
+       id="path8051" />
+    <path
+       style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate"
+       d="M 528.91587,556.85291 C 523.25902,555.4387 347.89654,631.80623 347.89654,631.80623 L 313.95541,812.82557 L 365.05087,1006.7738 L 622.25397,1074.4551 C 622.25397,1074.4551 828.72915,1227.1901 834.386,1222.9475 C 840.04286,1218.7049 1002.6774,1029.2002 1002.6774,1029.2002 L 842.87128,845.35248 L 796.20224,667.16157 L 528.91587,556.85291 z"
+       id="path8053"
+       clip-path="url(#clipPath8610)"
+       sodipodi:nodetypes="cccccscccc"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:1;fill:#0c0c0c;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 1097.6433,613.88997 C 1097.6433,613.88997 1120.2628,607.38316 1133.386,608.01724 C 1146.5093,608.65133 1164.0276,609.95586 1177.0949,620.20343 C 1190.1622,630.45099 1202.1626,647.3435 1211.2073,678.57308 C 1220.2519,709.80266 1212.9056,777.82509 1205.0312,821.92043 C 1197.1569,866.01577 1176.7661,928.03341 1160.0312,961.92043 C 1143.2964,995.80745 1110.2335,1039.4156 1099.4618,1051.7966 C 1088.0976,1064.8586 1043.2559,1088.2228 1020.0312,1094.0633 C 1025.3346,1083.4567 1068.931,1043.4744 1055.0312,1033.349 C 1041.0123,1023.1367 1009.2712,1079.3314 970.7381,1062.3822 C 992.12041,1049.2501 1012.5175,1011.1961 1004.7787,995.78772 C 996.93846,980.17733 974.07378,1044.5453 911.24317,1032.8006 C 941.29521,1005.2739 966.65023,961.89659 952.50587,949.8209 C 938.09071,937.51403 892.04412,1004.1141 892.04412,1004.1141 C 892.04412,1004.1141 889.22222,962.41287 905.81732,935.50673 C 922.45667,908.52886 985.47029,853.89146 1005.3704,823.80331 C 1025.2706,793.71517 1038.983,757.79429 1047.5059,731.28537 C 1056.0287,704.77645 1063.3068,654.18583 1063.3068,654.18583"
+       id="path8055"
+       sodipodi:nodetypes="czzzzzzczczczczzzc" />
+    <path
+       style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8818);enable-background:accumulate"
+       d="M 770.74639,609.17881 L 719.8347,706.75955 L 639.93163,817.77531 L 674.57987,889.19309 L 717.00628,968.38906 L 789.13117,923.13422 L 803.27331,730.80117 L 824.48651,592.20825 L 810.34437,502.05213 L 770.74639,609.17881 z"
+       id="path8057"
+       clip-path="url(#clipPath8622)"
+       sodipodi:nodetypes="cccccccccc"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate"
+       d="M 295,846.19519 L 301.64488,777.27234 C 301.64488,777.27234 391.96439,866.27691 464,900.19519 C 536.03561,934.11347 772,962.19519 772,962.19519 L 926,936.19519 L 890,1098.1952 L 604,1124.1952 L 306,1035.1952 L 295,846.19519 z"
+       id="path8059"
+       clip-path="url(#clipPath8906)"
+       sodipodi:nodetypes="cczcccccc"
+       transform="translate(276,136)" />
+    <path
+       transform="translate(450.03125,73.843964)"
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter3587);enable-background:new"
+       d="M 405.79629,845.99023 L 480.74961,911.04406 L 483.24924,927.92446 L 502.6526,938.08337 L 509.14464,961.13446 L 540.85369,952.76336 L 555.70293,1000.8466 C 567.95945,1013.5745 645.49637,887.7369 611.56436,1039.0304 L 550.75318,1055.2939 L 461.55026,960.60104 L 398.72523,906.80141 L 405.79629,845.99023 z"
+       id="path8061"
+       sodipodi:nodetypes="cccccccccccc"
+       clip-path="url(#clipPath3602)" />
+    <path
+       style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 1159.317,918.349 C 1213.6027,916.92043 1285.352,903.29701 1329.317,891.56328 C 1373.3697,879.80614 1455.2033,855.21604 1504.674,833.70614 C 1554.0133,812.25342 1618.2778,774.42454 1658.9599,741.56329 C 1699.468,708.8426 1711.3498,685.74348 1719.6741,707.99186 C 1728.0432,730.35965 1703.2672,764.31748 1681.817,789.06329 C 1660.2128,813.98669 1629.0856,841.76862 1582.8883,878.349 C 1536.691,914.92938 1426.8058,979.93363 1370.0312,1006.9204 C 1312.9652,1034.0458 1241.8279,1065.1589 1197.8884,1079.4205 C 1153.9489,1093.6821 1066.4598,1110.4919 1066.4598,1110.4919 L 1159.317,918.349 z"
+       id="path8063"
+       sodipodi:nodetypes="czzzzzzzzcc" />
+    <path
+       transform="translate(450.03125,73.843964)"
+       style="opacity:0.5;fill:url(#linearGradient3666);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3779);enable-background:accumulate"
+       d="M 1241.5965,652.95007 C 1241.5965,652.95007 1176.875,707.28713 1095.9326,751.94501 C 1013.9082,797.19985 811.67556,845.28311 811.67556,845.28311 C 811.67556,845.28311 796.57419,866.33507 856.93045,873.56739 C 917.28671,880.79971 1081.0124,820.2667 1135.5306,777.40085 C 1190.0488,734.535 1255.7387,665.67799 1255.7387,665.67799 L 1241.5965,652.95007 z"
+       id="path8065"
+       sodipodi:nodetypes="czczzcc"
+       clip-path="url(#clipPath3992)" />
+    <g
+       transform="translate(450.03125,73.843964)"
+       style="opacity:1;display:inline;enable-background:new"
+       id="g8067"
+       clip-path="url(#clipPath3986)">
+      <g
+         transform="translate(-174.03125,62.156036)"
+         style="filter:url(#filter3677)"
+         id="g8069">
+        <g
+           style="filter:url(#filter3785)"
+           id="g8071">
+          <path
+             sodipodi:nodetypes="czzccccc"
+             id="path8073"
+             d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z"
+             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+             transform="translate(174.03125,-62.156036)" />
+          <rect
+             y="486.14224"
+             x="1197.8389"
+             height="309.71277"
+             width="333.75412"
+             id="rect8075"
+             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+        </g>
+      </g>
+      <g
+         transform="translate(-174.03125,62.156036)"
+         style="opacity:0.18000004;display:inline;enable-background:new"
+         id="g8077">
+        <g
+           style="filter:url(#filter3785)"
+           id="g8079">
+          <path
+             sodipodi:nodetypes="czzccccc"
+             id="path8081"
+             d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z"
+             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+             transform="translate(174.03125,-62.156036)" />
+          <rect
+             y="486.14224"
+             x="1197.8389"
+             height="309.71277"
+             width="333.75412"
+             id="rect8083"
+             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+        </g>
+      </g>
+    </g>
+    <path
+       transform="translate(450.03125,73.843964)"
+       style="opacity:0.83300003;fill:#050505;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:15;stroke-linecap:butt;stroke-linejoin:miter;marker:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8225);enable-background:accumulate"
+       d="M 1264.1875,605 C 1259.6964,605.73268 1256.0305,608.45509 1252.25,611.40625 C 1242.1687,619.27601 1224.0805,645.83149 1204.2188,661.875 C 1164.3514,694.07816 1100.2228,731.85201 1051.6562,752.96875 C 1003.0422,774.10613 921.11498,798.78676 877.34375,810.46875 C 833.94554,822.05121 762.29972,835.59982 709.09375,837 L 704.53125,837.125 L 702.53125,841.25 L 609.6875,1033.375 L 603.1875,1046.8438 L 617.84375,1044 C 617.84375,1044 705.11343,1027.3486 750.1875,1012.7188 C 794.9127,998.20213 865.97836,967.05197 923.21875,939.84375 C 980.82199,912.46306 1090.1551,847.86412 1137.5,810.375 C 1183.8608,773.66518 1215.3049,745.65818 1237.4375,720.125 C 1248.3386,707.549 1260.1823,692.59356 1268.4688,677.375 C 1276.7552,662.15644 1287.6285,633.15692 1282.1562,618.53125 C 1280.9385,615.27651 1279.6048,612.46995 1277.5625,610.03125 C 1275.5202,607.59255 1269.0878,608.45926 1269,605 C 1268.7902,596.73518 1265.6845,604.75577 1264.1875,605 z M 1266.3438,620.21875 C 1266.7586,620.80449 1267.3749,621.77641 1268.125,623.78125 C 1271.0218,631.52338 1266.6843,655.68 1259.3125,669.21875 C 1251.9407,682.7575 1236.6741,698.14269 1226.125,710.3125 C 1205.0496,734.62606 1174.2213,762.17406 1128.1875,798.625 C 1083.1379,834.29659 972.72717,899.71959 916.78125,926.3125 C 859.88952,953.35499 788.68509,984.4309 745.53125,998.4375 C 709.16634,1010.2406 649.68654,1022.2713 629.8125,1026.2188 L 714.09375,851.75 C 768.80066,849.7007 837.88634,836.53365 881.21875,824.96875 C 925.55297,813.1365 1007.2974,788.63242 1057.625,766.75 C 1107.737,744.96129 1170.1594,705.58184 1211.6562,672.0625 C 1232.3026,655.38529 1253.4011,629.51662 1261.4688,623.21875 C 1263.9058,621.31633 1265.5494,620.58295 1266.3438,620.21875 z"
+       id="path8085"
+       clip-path="url(#clipPath3722)"
+       sodipodi:nodetypes="cssssccccccssssssssccssssssccssssc" />
+    <g
+       style="opacity:1;display:inline;enable-background:new"
+       id="g8087"
+       mask="url(#mask7704)"
+       transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
+       inkscape:transform-center-x="-185.09603"
+       inkscape:transform-center-y="-12.859654">
+      <path
+         transform="translate(8.0045714e-2,-3.125e-2)"
+         style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+         d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 722.3366,-205.69561 L 730.26626,-186.41789 C 729.67463,-184.44432 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z"
+         id="path8089"
+         sodipodi:nodetypes="ccssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssscccccssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssssssssc" />
+      <g
+         clip-path="url(#clipPath7421)"
+         id="g8091">
+        <path
+           id="path8093"
+           d="M 1107.409,-284.04961 C 1106.9903,-283.83678 1107.2534,-283.95572 1106.7618,-283.7438 C 1106.2757,-283.53426 1105.0384,-283.16941 1102.6822,-282.28485 C 1099.3511,-281.03428 1096.852,-280.13141 1095.6563,-279.21875 C 1094.1202,-279.19749 1091.9358,-278.98544 1090,-278.5 C 1087.0185,-277.75234 1085.1448,-277.32599 1083.25,-276.90625 C 1081.3552,-276.48653 1081.5745,-276.26406 1080.375,-276.03125 C 1079.0784,-275.77959 1078.6536,-276.04024 1074.9375,-275.25 C 1071.4476,-274.50786 1066.0427,-273.31893 1064.7813,-272.5625 C 1063.1974,-272.74329 1060.9138,-272.88428 1058.9375,-272.59375 C 1055.8971,-272.1468 1054.0213,-271.92099 1052.0938,-271.6875 C 1051.4384,-271.60813 1051.0527,-271.48672 1050.75,-271.40625 C 1050.3238,-271.2746 1050.0642,-271.14623 1049.375,-271.0625 C 1048.0634,-270.90314 1047.6128,-271.21933 1043.8438,-270.78125 C 1040.2899,-270.36817 1034.8384,-269.50843 1033.5938,-268.84375 C 1031.9948,-269.14105 1029.736,-269.37794 1027.75,-269.1875 C 1024.6912,-268.89419 1022.778,-268.70351 1020.8438,-268.53125 C 1018.9095,-268.35899 1019.1551,-268.10888 1017.9375,-268 C 1016.6213,-267.88231 1016.1777,-268.16363 1012.4063,-267.75 C 1008.8644,-267.36156 1003.3984,-266.54073 1002.125,-265.875 C 1000.5261,-266.1697 998.23783,-266.38201 996.25,-266.1875 C 993.19176,-265.88826 991.30887,-265.70726 989.375,-265.53125 C 988.71751,-265.47141 988.33496,-265.35269 988.03125,-265.28125 C 987.6036,-265.1623 987.34774,-265.06318 986.65625,-265 C 985.34029,-264.87975 984.89649,-265.19488 981.125,-264.78125 C 977.56886,-264.39124 972.11946,-263.54209 970.875,-262.875 C 969.27637,-263.16919 967.01516,-263.39872 965.03125,-263.1875 C 961.97565,-262.86218 960.05721,-262.66126 958.125,-262.46875 C 956.19279,-262.27625 956.43513,-262.02787 955.21875,-261.90625 C 953.90387,-261.77479 953.45577,-262.07079 949.6875,-261.625 C 946.14863,-261.20635 940.70982,-260.33283 939.4375,-259.65625 C 937.83995,-259.9373 935.57754,-260.07668 933.59375,-259.84375 C 930.54177,-259.48539 928.64867,-259.27589 926.71875,-259.0625 C 926.06255,-258.98995 925.67809,-258.88981 925.375,-258.8125 C 924.94823,-258.68528 924.69009,-258.5453 924,-258.46875 C 922.68667,-258.32307 922.23254,-258.64277 918.46875,-258.15625 C 914.91986,-257.6975 909.49012,-256.73723 908.25,-256.03125 C 906.65695,-256.27549 904.41619,-256.4126 902.4375,-256.15625 C 899.38991,-255.76144 897.48679,-255.5078 895.5625,-255.25 C 893.63822,-254.99221 893.83639,-254.75647 892.625,-254.59375 C 891.31554,-254.41785 890.87781,-254.69813 887.125,-254.125 C 883.60071,-253.58676 878.20185,-252.42583 876.9375,-251.6875 C 875.35,-251.89104 873.092,-251.94223 871.125,-251.59375 C 868.09883,-251.05763 866.22611,-250.73206 864.3125,-250.40625 C 863.66189,-250.29548 863.29879,-250.13531 863,-250.03125 C 862.57933,-249.86637 862.33655,-249.69995 861.65625,-249.5625 C 860.3616,-249.30091 859.92913,-249.5687 856.21875,-248.75 C 852.72022,-247.97805 847.3728,-246.36707 846.15625,-245.53125 C 844.59347,-245.6087 842.39867,-245.44597 840.46875,-244.9375 C 837.49631,-244.15437 835.65114,-243.70541 833.78125,-243.1875 C 831.91137,-242.6696 832.11465,-242.42022 830.9375,-242.09375 C 829.66504,-241.74085 829.24047,-241.98666 825.59375,-240.90625 C 822.16905,-239.89162 816.94431,-237.97308 815.71875,-237.0625 C 814.17992,-237.04976 811.99892,-236.79028 810.09375,-236.1875 C 807.16269,-235.26016 805.34344,-234.72908 803.5,-234.125 C 802.87324,-233.91962 802.50827,-233.73242 802.21875,-233.59375 C 801.81112,-233.38014 801.56541,-233.185 800.90625,-232.96875 C 799.65179,-232.55721 799.22014,-232.77971 795.625,-231.53125 C 792.23515,-230.35408 787.03002,-228.31755 785.84375,-227.375 C 784.31986,-227.31533 782.1937,-226.98013 780.3125,-226.3125 C 777.41511,-225.28421 775.61342,-224.63702 773.78125,-224 C 771.94908,-223.36299 772.1534,-223.15146 771,-222.75 C 769.75322,-222.31604 769.33639,-222.55028 765.78125,-221.1875 C 762.44258,-219.9077 757.2941,-217.70495 756.09375,-216.71875 C 754.58657,-216.61106 752.45806,-216.21995 750.59375,-215.5 C 747.72557,-214.3924 745.96995,-213.71844 744.15625,-213.03125 C 743.53959,-212.79762 743.15984,-212.58922 742.875,-212.4375 C 742.875,-212.4375 742.875,-211.34375 742.875,-211.34375 C 742.98678,-211.56611 743.26099,-212.16118 743.78125,-212.4375 C 744.47922,-212.80822 748.59488,-214.43087 750.59375,-215.15625 C 752.25061,-215.7575 754.74764,-216.48493 756.5625,-216.46875 C 756.86412,-216.46606 757.15012,-216.41785 757.40625,-216.375 C 759.24874,-216.06675 764.875,-214.8125 764.875,-214.8125 C 764.87499,-214.8125 758.64151,-216.45925 757.84375,-216.65625 C 757.65296,-216.70336 757.30803,-216.72497 756.875,-216.71875 C 758.02046,-217.58846 761.636,-219.11226 764.21875,-220.15625 C 767.05697,-221.30352 767.33556,-221.40807 769.28125,-221.8125 C 771.28955,-222.22994 772.4375,-222.3125 772.4375,-222.3125 C 772.4375,-222.31249 772.35514,-222.91364 773.40625,-223.4375 C 774.11135,-223.78891 778.29327,-225.3299 780.3125,-226 C 782.2644,-226.64773 785.3699,-227.3585 787.1875,-227 C 789.05073,-226.6325 794.71875,-225.1875 794.71875,-225.1875 C 794.71876,-225.1875 788.43175,-227.05861 787.625,-227.28125 C 787.43208,-227.3345 787.09416,-227.36729 786.65625,-227.375 C 787.81459,-228.20788 791.45069,-229.57032 794.0625,-230.53125 C 796.93266,-231.58726 797.22984,-231.69305 799.1875,-232.0625 C 801.04099,-232.41229 802.04634,-232.48798 802.21875,-232.5 C 802.33235,-232.71724 802.5962,-233.31002 803.125,-233.5625 C 803.83444,-233.90124 808.05107,-235.27525 810.09375,-235.875 C 811.78692,-236.37211 814.33452,-236.91177 816.1875,-236.78125 C 816.49545,-236.75957 816.80099,-236.68399 817.0625,-236.625 C 818.94368,-236.20068 824.65625,-234.59375 824.65625,-234.59375 C 824.65626,-234.59375 818.31451,-236.659 817.5,-236.90625 C 817.30521,-236.96539 816.94212,-237.01019 816.5,-237.03125 C 817.66949,-237.8288 821.36302,-239.08747 824,-239.96875 C 826.89781,-240.93722 827.23301,-240.97207 829.21875,-241.25 C 831.2684,-241.53689 832.40625,-241.5625 832.40625,-241.5625 C 832.40623,-241.5625 832.3335,-242.16947 833.40625,-242.625 C 834.12585,-242.93057 838.39723,-244.12575 840.46875,-244.625 C 842.47119,-245.10758 845.66724,-245.55329 847.53125,-245.03125 C 849.44203,-244.4961 855.25,-242.53125 855.25,-242.53125 C 855.25,-242.53125 848.82734,-244.95476 848,-245.25 C 847.80216,-245.32061 847.41784,-245.39039 846.96875,-245.4375 C 848.15665,-246.16615 851.88402,-247.21158 854.5625,-247.9375 C 857.50592,-248.73525 857.85458,-248.70833 859.875,-248.84375 C 861.78789,-248.97198 862.82205,-248.91484 863,-248.90625 C 863.11728,-249.10991 863.39176,-249.68573 863.9375,-249.875 C 864.66969,-250.12894 869.01602,-250.92289 871.125,-251.25 C 872.87313,-251.52111 875.52588,-251.7347 877.4375,-251.34375 C 877.75516,-251.27879 878.04272,-251.15824 878.3125,-251.0625 C 880.25324,-250.37377 886.15625,-247.96875 886.15625,-247.96875 C 886.15626,-247.96875 879.62154,-250.91952 878.78125,-251.28125 C 878.58028,-251.36776 878.20612,-251.44804 877.75,-251.53125 C 878.9565,-252.16443 882.77956,-252.92685 885.5,-253.4375 C 888.48953,-253.99869 888.80023,-253.96704 890.84375,-253.96875 C 892.95301,-253.97052 894.15625,-253.84375 894.15625,-253.84375 C 894.15625,-253.84374 894.08354,-254.47494 895.1875,-254.78125 C 895.92802,-254.98672 900.31362,-255.61512 902.4375,-255.84375 C 904.49052,-256.06474 907.75613,-256.09597 909.65625,-255.375 C 911.60404,-254.63593 917.5,-252 917.5,-252 C 917.50002,-252 910.93712,-255.17897 910.09375,-255.5625 C 909.89207,-255.65423 909.55154,-255.74871 909.09375,-255.84375 C 910.30467,-256.44563 914.07817,-257.09259 916.8125,-257.5 C 919.8173,-257.94772 920.13801,-257.9517 922.1875,-257.90625 C 924.12795,-257.86323 925.19449,-257.71202 925.375,-257.6875 C 925.49392,-257.88066 925.7589,-258.45333 926.3125,-258.59375 C 927.05521,-258.78213 931.46679,-259.32803 933.59375,-259.53125 C 935.35678,-259.69967 938.01384,-259.76554 939.9375,-259.28125 C 940.25718,-259.20077 940.54101,-259.07766 940.8125,-258.96875 C 942.76543,-258.18526 948.71875,-255.5 948.71875,-255.5 C 948.71873,-255.5 942.12684,-258.75348 941.28125,-259.15625 C 941.07903,-259.25257 940.70899,-259.36328 940.25,-259.46875 C 941.46414,-260.04302 945.29366,-260.59094 948.03125,-260.96875 C 951.03963,-261.38395 951.35432,-261.41138 953.40625,-261.34375 C 955.52423,-261.27394 956.71875,-261.09375 956.71875,-261.09375 C 956.71873,-261.09375 956.6415,-261.73116 957.75,-262 C 958.49362,-262.18035 962.90176,-262.66355 965.03125,-262.84375 C 967.08972,-263.01792 970.37449,-262.96807 972.28125,-262.1875 C 974.23584,-261.38734 980.15625,-258.65625 980.15625,-258.65625 C 980.15623,-258.65625 973.59632,-261.96501 972.75,-262.375 C 972.54763,-262.47305 972.17814,-262.5781 971.71875,-262.6875 C 972.93392,-263.2514 976.72883,-263.8018 979.46875,-264.15625 C 982.47966,-264.54577 982.79006,-264.5539 984.84375,-264.46875 C 986.78814,-264.38815 987.85038,-264.21551 988.03125,-264.1875 C 988.15041,-264.37836 988.41402,-264.93281 988.96875,-265.0625 C 989.71301,-265.2365 994.11868,-265.71297 996.25,-265.875 C 998.01662,-266.00927 1000.6997,-266.00071 1002.625,-265.5 C 1002.945,-265.41679 1003.2283,-265.29873 1003.5,-265.1875 C 1005.4546,-264.38734 1011.4063,-261.625 1011.4063,-261.625 C 1011.4062,-261.625 1004.8151,-264.96501 1003.9688,-265.375 C 1003.7664,-265.47305 1003.3969,-265.57811 1002.9375,-265.6875 C 1004.1526,-266.2514 1007.9788,-266.77056 1010.7188,-267.125 C 1013.7297,-267.51453 1014.0713,-267.5539 1016.125,-267.46875 C 1018.2447,-267.38087 1019.4375,-267.15625 1019.4375,-267.15625 C 1019.4375,-267.15625 1019.3591,-267.80527 1020.4688,-268.0625 C 1021.2131,-268.23506 1025.6183,-268.68586 1027.75,-268.84375 C 1029.8106,-268.99635 1033.0929,-268.94052 1035,-268.15625 C 1036.955,-267.3523 1042.875,-264.65625 1042.875,-264.65625 C 1042.875,-264.65625 1036.3152,-267.93212 1035.4688,-268.34375 C 1035.2663,-268.44219 1034.897,-268.54597 1034.4375,-268.65625 C 1035.6529,-269.21779 1039.4494,-269.78403 1042.1875,-270.15625 C 1045.1965,-270.5653 1045.5102,-270.57183 1047.5625,-270.5 C 1049.5056,-270.43201 1050.5697,-270.33515 1050.75,-270.3125 C 1050.8688,-270.5069 1051.1346,-271.04131 1051.6875,-271.1875 C 1052.4293,-271.38362 1056.8186,-272.01628 1058.9375,-272.28125 C 1060.6939,-272.50086 1063.3428,-272.61356 1065.25,-272.25 C 1065.5669,-272.18959 1065.8558,-272.06062 1066.125,-271.96875 C 1068.0612,-271.30783 1073.9688,-269.03125 1073.9688,-269.03125 C 1073.9687,-269.03125 1067.4321,-271.8378 1066.5938,-272.1875 C 1066.3933,-272.27113 1066.0176,-272.36083 1065.5625,-272.4375 C 1066.7662,-273.08796 1070.5816,-273.80945 1073.2813,-274.4375 C 1076.248,-275.1277 1076.5702,-275.19257 1078.5938,-275.3125 C 1080.6824,-275.4363 1081.875,-275.34375 1081.875,-275.34375 C 1081.875,-275.34374 1081.788,-275.9758 1082.875,-276.375 C 1083.6042,-276.6428 1087.9222,-277.71297 1090,-278.1875 C 1092.0085,-278.64619 1095.1679,-279.2168 1097,-278.8125 C 1098.8781,-278.39804 1110.5782,-275.79687 1110.5782,-275.79687 C 1110.5782,-275.79687 1098.2507,-278.81953 1097.4375,-279.0625 C 1097.243,-279.12062 1096.8789,-279.16876 1096.4375,-279.1875 C 1097.6051,-279.99119 1099.9517,-280.8748 1102.5469,-281.89062 C 1104.2283,-282.5488 1103.4706,-282.26721 1105.3228,-282.89422 C 1107.0764,-283.48788 1107.8082,-283.90493 1107.9532,-284.00721 C 1108.2993,-284.21372 1107.5972,-284.12909 1107.409,-284.04961 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7001);enable-background:new"
+           sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
+        <path
+           id="path8095"
+           d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6949);enable-background:new" />
+        <path
+           id="path8097"
+           d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6961);enable-background:new" />
+        <path
+           id="path8099"
+           d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6957);enable-background:new" />
+        <path
+           id="path8101"
+           d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.501,-280.8173 1114.6376,-279.36691 C 1114.7742,-277.91652 1114.8276,-276.50671 1114.5496,-275.89827 C 1114.2715,-275.28982 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1114.2038,-275.19053 1114.2654,-274.34607 C 1114.3247,-273.53269 1114.1322,-272.70638 1113.7456,-271.54045 C 1113.3544,-270.36044 1111.9004,-267.19047 1111.4599,-266.94168 C 1111.0076,-266.68617 1110.5075,-266.75969 1110.1719,-266.89063 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6997);enable-background:new"
+           sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
+        <path
+           id="path8103"
+           d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6953);enable-background:new" />
+        <path
+           id="path8105"
+           d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6993);enable-background:new" />
+        <path
+           id="path8107"
+           d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6989);enable-background:new" />
+        <path
+           id="path8109"
+           d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6985);enable-background:new" />
+        <path
+           id="path8111"
+           d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6965);enable-background:new" />
+        <path
+           id="path8113"
+           d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6981);enable-background:new" />
+        <path
+           id="path8115"
+           d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6977);enable-background:new" />
+        <path
+           id="path8117"
+           d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6973);enable-background:new" />
+        <path
+           id="path8119"
+           d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6969);enable-background:new" />
+        <g
+           id="g8121"
+           style="fill:#ffffff;fill-opacity:1;filter:url(#filter7345)">
+          <path
+             sodipodi:nodetypes="czzzczzc"
+             id="path8123"
+             d="M 744.9375,-212.11731 C 744.9375,-212.11731 752.15979,-215.34049 754,-215.61731 C 755.84021,-215.89413 757.35225,-215.62054 760,-215.05481 C 762.64775,-214.48908 768.7357,-212.83963 771.1875,-211.67981 C 773.6393,-210.51999 776.5,-208.11731 776.5,-208.11731 C 776.5,-208.11731 769.35356,-210.8975 766.3125,-211.67981 C 763.27144,-212.46212 758.66789,-213.76355 755.9375,-213.99231 C 753.20711,-214.22107 744.9375,-212.11731 744.9375,-212.11731 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+          <path
+             sodipodi:nodetypes="czzzczzc"
+             id="path8125"
+             d="M 735.46875,-206.95416 C 735.46875,-206.95416 739.12854,-209.17734 740.96875,-209.45416 C 742.80896,-209.73098 744.6335,-209.20739 747.28125,-208.64166 C 749.929,-208.07593 756.01695,-206.42648 758.46875,-205.26666 C 760.92055,-204.10684 765.03125,-203.14166 765.03125,-203.14166 C 765.03125,-203.14166 756.63481,-204.48435 753.59375,-205.26666 C 750.55269,-206.04897 745.63664,-207.6004 742.90625,-207.82916 C 740.17586,-208.05792 735.46875,-206.95416 735.46875,-206.95416 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             sodipodi:nodetypes="czzzczzc"
+             id="path8127"
+             d="M 759.85042,-217.61116 C 759.85042,-217.61116 768.39412,-220.90973 770.2482,-221.06902 C 772.10229,-221.22832 773.88986,-220.58982 776.4963,-219.85694 C 779.10274,-219.12406 785.07354,-217.091 787.44666,-215.77769 C 789.81978,-214.46438 793.86083,-213.23987 793.86083,-213.23987 C 793.86083,-213.23987 785.5667,-215.11352 782.58152,-216.08754 C 779.59633,-217.06156 774.78883,-218.92232 772.0785,-219.32416 C 769.36817,-219.726 759.85042,-217.61116 759.85042,-217.61116 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             sodipodi:nodetypes="czzzczzc"
+             id="path8129"
+             d="M 775.19813,-223.2266 C 775.19813,-223.2266 782.96946,-226.00904 784.82644,-226.13009 C 786.68341,-226.25113 788.45744,-225.57592 791.04822,-224.78947 C 793.63899,-224.00302 799.56662,-221.8473 801.91216,-220.48535 C 804.25771,-219.1234 808.27265,-217.81585 808.27265,-217.81585 C 808.27265,-217.81585 800.01892,-219.86008 797.05444,-220.89543 C 794.08997,-221.93078 789.32185,-223.89024 786.62038,-224.34786 C 783.91891,-224.80549 775.19813,-223.2266 775.19813,-223.2266 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-4.3190906"
+             inkscape:transform-center-x="13.852145"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8131"
+             d="M 789.64298,-227.95417 C 789.64298,-227.95417 798.32554,-231.47448 800.18452,-231.55952 C 802.04349,-231.64455 803.8041,-230.9351 806.37915,-230.09859 C 808.9542,-229.2621 814.83894,-226.99193 817.15766,-225.58479 C 819.47638,-224.17764 823.46523,-222.79255 823.46523,-222.79255 C 823.46523,-222.79255 815.25266,-224.99632 812.3088,-226.08891 C 809.36494,-227.1815 804.63568,-229.23299 801.94358,-229.74288 C 799.25149,-230.25276 789.64298,-227.95417 789.64298,-227.95417 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-4.3190906"
+             inkscape:transform-center-x="13.852145"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8133"
+             d="M 804.49513,-233.32948 C 804.49513,-233.32948 812.30269,-235.91229 814.16167,-235.99733 C 816.02064,-236.08236 817.78125,-235.37291 820.3563,-234.5364 C 822.93135,-233.69991 828.81609,-231.42974 831.13481,-230.0226 C 833.45353,-228.61545 837.44238,-227.23036 837.44238,-227.23036 C 837.44238,-227.23036 829.22981,-229.43413 826.28595,-230.52672 C 823.34209,-231.61931 818.61283,-233.6708 815.92073,-234.18069 C 813.22864,-234.69057 804.49513,-233.32948 804.49513,-233.32948 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-4.3190906"
+             inkscape:transform-center-x="13.852145"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8135"
+             d="M 819.55763,-237.57948 C 819.55763,-237.57948 828.11519,-240.16229 829.97417,-240.24733 C 831.83314,-240.33236 833.59375,-239.62291 836.1688,-238.7864 C 838.74385,-237.94991 844.62859,-235.67974 846.94731,-234.2726 C 849.26603,-232.86545 853.25488,-231.48036 853.25488,-231.48036 C 853.25488,-231.48036 845.04231,-233.68413 842.09845,-234.77672 C 839.15459,-235.86931 834.42533,-237.9208 831.73323,-238.43069 C 829.04114,-238.94057 819.55763,-237.57948 819.55763,-237.57948 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-4.9269042"
+             inkscape:transform-center-x="13.64141"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8137"
+             d="M 836.23395,-242.60125 C 836.23395,-242.60125 843.20097,-244.58848 845.06179,-244.56882 C 846.9226,-244.54915 848.64052,-243.7418 851.16444,-242.76177 C 853.68837,-241.78177 859.4361,-239.18419 861.672,-237.64886 C 863.9079,-236.11351 867.81253,-234.50625 867.81253,-234.50625 C 867.81253,-234.50625 859.73692,-237.16847 856.85917,-238.42491 C 853.98143,-239.68136 849.37505,-241.99561 846.71589,-242.65612 C 844.05674,-243.31661 836.23395,-242.60125 836.23395,-242.60125 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.1542119"
+             inkscape:transform-center-x="13.55068"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8139"
+             d="M 850.73028,-246.00461 C 850.73028,-246.00461 858.41812,-248.03229 860.2781,-247.97315 C 862.13807,-247.914 863.83848,-247.07036 866.34103,-246.03699 C 868.84358,-245.00365 874.5349,-242.28467 876.73771,-240.70224 C 878.94053,-239.11979 882.81016,-237.43004 882.81016,-237.43004 C 882.81016,-237.43004 874.79287,-240.26302 871.94244,-241.58026 C 869.09201,-242.89749 864.53578,-245.30898 861.89124,-246.02576 C 859.2467,-246.74254 850.73028,-246.00461 850.73028,-246.00461 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.4740887"
+             inkscape:transform-center-x="13.41151"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8141"
+             d="M 864.82496,-249.21081 C 864.82496,-249.21081 872.99448,-251.17987 874.85184,-251.06477 C 876.70919,-250.94965 878.38342,-250.05521 880.85374,-248.94698 C 883.32405,-247.83877 888.93094,-244.94971 891.08512,-243.30167 C 893.2393,-241.65363 897.05632,-239.84815 897.05632,-239.84815 C 897.05632,-239.84815 889.12793,-242.92121 886.31845,-244.32365 C 883.50896,-245.72609 879.02739,-248.27364 876.40562,-249.06971 C 873.78386,-249.86577 864.82496,-249.21081 864.82496,-249.21081 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.79376"
+             inkscape:transform-center-x="13.258805"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8143"
+             d="M 881.38485,-251.60282 C 881.38485,-251.60282 889.47021,-253.51091 891.32322,-253.33946 C 893.17622,-253.16799 894.82252,-252.22313 897.25804,-251.04038 C 899.69357,-249.85767 905.21013,-246.79968 907.31327,-245.08699 C 909.41641,-243.37429 913.17684,-241.45373 913.17684,-241.45373 C 913.17684,-241.45373 905.34544,-244.76613 902.57984,-246.25323 C 899.81423,-247.74035 895.41209,-250.42282 892.8157,-251.29814 C 890.21933,-252.17345 881.38485,-251.60282 881.38485,-251.60282 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8145"
+             d="M 896.58415,-254.34724 C 896.58415,-254.34724 904.22581,-255.77494 906.07962,-255.61239 C 907.93342,-255.44983 909.58424,-254.51289 912.02541,-253.34186 C 914.46659,-252.17086 919.99779,-249.1394 922.10913,-247.43684 C 924.22047,-245.73426 927.99009,-243.83179 927.99009,-243.83179 C 927.99009,-243.83179 920.14286,-247.10653 917.37014,-248.58034 C 914.59743,-250.05414 910.18245,-252.71543 907.58189,-253.57827 C 904.98134,-254.44109 896.58415,-254.34724 896.58415,-254.34724 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8147"
+             d="M 911.45328,-255.98544 C 911.45328,-255.98544 920.09494,-257.53814 921.94875,-257.37559 C 923.80255,-257.21303 925.45337,-256.27609 927.89454,-255.10506 C 930.33572,-253.93406 935.86692,-250.9026 937.97826,-249.20004 C 940.0896,-247.49746 943.85922,-245.59499 943.85922,-245.59499 C 943.85922,-245.59499 936.01199,-248.86973 933.23927,-250.34354 C 930.46656,-251.81734 926.05158,-254.47863 923.45102,-255.34147 C 920.85047,-256.20429 911.45328,-255.98544 911.45328,-255.98544 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8149"
+             d="M 927.70328,-258.29794 C 927.70328,-258.29794 935.34494,-259.16314 937.19875,-259.00059 C 939.05255,-258.83803 940.70337,-257.90109 943.14454,-256.73006 C 945.58572,-255.55906 951.11692,-252.5276 953.22826,-250.82504 C 955.3396,-249.12246 959.10922,-247.21999 959.10922,-247.21999 C 959.10922,-247.21999 951.26199,-250.49473 948.48927,-251.96854 C 945.71656,-253.44234 941.30158,-256.10363 938.70102,-256.96647 C 936.10047,-257.82929 927.70328,-258.29794 927.70328,-258.29794 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8151"
+             d="M 942.82828,-259.48544 C 942.82828,-259.48544 951.40744,-260.97564 953.26125,-260.81309 C 955.11505,-260.65053 956.76587,-259.71359 959.20704,-258.54256 C 961.64822,-257.37156 967.17942,-254.3401 969.29076,-252.63754 C 971.4021,-250.93496 975.17172,-249.03249 975.17172,-249.03249 C 975.17172,-249.03249 967.32449,-252.30723 964.55177,-253.78104 C 961.77906,-255.25484 957.36408,-257.91613 954.76352,-258.77897 C 952.16297,-259.64179 942.82828,-259.48544 942.82828,-259.48544 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8153"
+             d="M 959.07828,-261.54794 C 959.07828,-261.54794 966.90744,-262.35064 968.76125,-262.18809 C 970.61505,-262.02553 972.26587,-261.08859 974.70704,-259.91756 C 977.14822,-258.74656 982.67942,-255.7151 984.79076,-254.01254 C 986.9021,-252.30996 990.67172,-250.40749 990.67172,-250.40749 C 990.67172,-250.40749 982.82449,-253.68223 980.05177,-255.15604 C 977.27906,-256.62984 972.86408,-259.29113 970.26352,-260.15397 C 967.66297,-261.01679 959.07828,-261.54794 959.07828,-261.54794 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8155"
+             d="M 974.45328,-262.79794 C 974.45328,-262.79794 982.84494,-263.97564 984.69875,-263.81309 C 986.55255,-263.65053 988.20337,-262.71359 990.64454,-261.54256 C 993.08572,-260.37156 998.61692,-257.3401 1000.7283,-255.63754 C 1002.8396,-253.93496 1006.6092,-252.03249 1006.6092,-252.03249 C 1006.6092,-252.03249 998.76199,-255.30723 995.98927,-256.78104 C 993.21656,-258.25484 988.80158,-260.91613 986.20102,-261.77897 C 983.60047,-262.64179 974.45328,-262.79794 974.45328,-262.79794 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8157"
+             d="M 990.64078,-264.86044 C 990.64078,-264.86044 997.53244,-265.85064 999.38625,-265.68809 C 1001.2401,-265.52553 1002.8909,-264.58859 1005.332,-263.41756 C 1007.7732,-262.24656 1013.3044,-259.2151 1015.4158,-257.51254 C 1017.5271,-255.80996 1021.2967,-253.90749 1021.2967,-253.90749 C 1021.2967,-253.90749 1013.4495,-257.18223 1010.6768,-258.65604 C 1007.9041,-260.12984 1003.4891,-262.79113 1000.8885,-263.65397 C 998.28797,-264.51679 990.64078,-264.86044 990.64078,-264.86044 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8159"
+             d="M 1007.7658,-265.79794 C 1007.7658,-265.79794 1014.5949,-266.97564 1016.4488,-266.81309 C 1018.3026,-266.65053 1019.9534,-265.71359 1022.3945,-264.54256 C 1024.8357,-263.37156 1030.3669,-260.3401 1032.4783,-258.63754 C 1034.5896,-256.93496 1038.3592,-255.03249 1038.3592,-255.03249 C 1038.3592,-255.03249 1030.512,-258.30723 1027.7393,-259.78104 C 1024.9666,-261.25484 1020.5516,-263.91613 1017.951,-264.77897 C 1015.3505,-265.64179 1007.7658,-265.79794 1007.7658,-265.79794 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8161"
+             d="M 1023.8908,-267.79794 C 1023.8908,-267.79794 1029.9699,-268.22564 1031.8238,-268.06309 C 1033.6776,-267.90053 1035.3284,-266.96359 1037.7695,-265.79256 C 1040.2107,-264.62156 1045.7419,-261.5901 1047.8533,-259.88754 C 1049.9646,-258.18496 1053.7342,-256.28249 1053.7342,-256.28249 C 1053.7342,-256.28249 1045.887,-259.55723 1043.1143,-261.03104 C 1040.3416,-262.50484 1035.9266,-265.16613 1033.326,-266.02897 C 1030.7255,-266.89179 1023.8908,-267.79794 1023.8908,-267.79794 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8163"
+             d="M 1039.7033,-269.17294 C 1039.7033,-269.17294 1046.1574,-269.85064 1048.0113,-269.68809 C 1049.8651,-269.52553 1051.5159,-268.58859 1053.957,-267.41756 C 1056.3982,-266.24656 1061.9294,-263.2151 1064.0408,-261.51254 C 1066.1521,-259.80996 1069.9217,-257.90749 1069.9217,-257.90749 C 1069.9217,-257.90749 1062.0745,-261.18223 1059.3018,-262.65604 C 1056.5291,-264.12984 1052.1141,-266.79113 1049.5135,-267.65397 C 1046.913,-268.51679 1039.7033,-269.17294 1039.7033,-269.17294 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.1360724"
+             inkscape:transform-center-x="13.55813"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8165"
+             d="M 1055.2718,-271.03319 C 1055.2718,-271.03319 1060.7694,-271.94264 1062.6296,-271.88667 C 1064.4897,-271.83067 1066.1915,-270.98993 1068.6957,-269.96081 C 1071.2001,-268.93171 1076.896,-266.22241 1079.1015,-264.64372 C 1081.307,-263.06501 1085.1795,-261.38182 1085.1795,-261.38182 C 1085.1795,-261.38182 1077.1575,-264.20121 1074.3047,-265.5136 C 1071.4521,-266.82598 1066.8918,-269.22973 1064.246,-269.94203 C 1061.6003,-270.65431 1055.2718,-271.03319 1055.2718,-271.03319 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-4.6370147"
+             inkscape:transform-center-x="13.74758"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8167"
+             d="M 1072.7007,-273.48537 C 1072.7007,-273.48537 1077.2479,-274.64118 1079.1087,-274.67158 C 1080.9694,-274.70196 1082.7083,-273.94109 1085.2576,-273.02927 C 1087.807,-272.1175 1093.6225,-269.67541 1095.899,-268.20077 C 1098.1753,-266.72609 1102.1217,-265.22441 1102.1217,-265.22441 C 1102.1217,-265.22441 1093.9775,-267.66852 1091.067,-268.84713 C 1088.1565,-270.02573 1083.4896,-272.21528 1080.8136,-272.80404 C 1078.1377,-273.39279 1072.7007,-273.48537 1072.7007,-273.48537 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-4.4842392"
+             inkscape:transform-center-x="13.79933"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8169"
+             d="M 1087.1585,-276.5244 C 1087.1585,-276.5244 1093.1185,-278.29795 1094.9787,-278.35464 C 1096.8387,-278.41131 1098.5883,-277.67509 1101.1502,-276.79939 C 1103.7122,-275.92373 1103.6728,-275.94226 1106.4837,-275.30924 C 1109.2806,-274.67938 1113.5604,-273.79611 1113.5604,-273.79611 C 1113.5604,-273.79611 1109.9449,-273.81239 1106.7681,-274.26225 C 1103.6526,-274.70344 1099.3938,-275.9605 1096.7097,-276.51138 C 1094.0258,-277.06226 1087.1585,-276.5244 1087.1585,-276.5244 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             sodipodi:nodetypes="czczc"
+             id="path8171"
+             d="M 1099.25,-279.92981 C 1099.4112,-279.66119 1110.4581,-284.53027 1111.4375,-284.61731 C 1112.4169,-284.70435 1113.4375,-281.49231 1113.4375,-281.49231 C 1113.4375,-281.49231 1112.6624,-282.99665 1110.5625,-282.55481 C 1108.4626,-282.11297 1099.2616,-279.8834 1099.25,-279.92981 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+        </g>
+        <path
+           id="path8173"
+           d="M 1107.4532,-284.0938 C 1107.0345,-283.88097 1107.2976,-283.99991 1106.806,-283.78799 C 1106.3199,-283.57845 1105.0826,-283.2136 1102.7264,-282.32904 C 1099.3953,-281.07847 1096.8962,-280.1756 1095.7005,-279.26294 C 1094.1644,-279.24168 1091.98,-279.02963 1090.0442,-278.54419 C 1087.0627,-277.79653 1085.189,-277.37018 1083.2942,-276.95044 C 1081.3994,-276.53072 1081.6187,-276.30825 1080.4192,-276.07544 C 1079.1226,-275.82378 1078.6978,-276.08443 1074.9817,-275.29419 C 1071.4918,-274.55205 1066.0869,-273.36312 1064.8255,-272.60669 C 1063.2416,-272.78748 1060.958,-272.92847 1058.9817,-272.63794 C 1055.9413,-272.19099 1054.0655,-271.96518 1052.138,-271.73169 C 1051.4826,-271.65232 1051.0969,-271.53091 1050.7942,-271.45044 C 1050.368,-271.31879 1050.1084,-271.19042 1049.4192,-271.10669 C 1048.1076,-270.94733 1047.657,-271.26352 1043.888,-270.82544 C 1040.3341,-270.41236 1034.8826,-269.55262 1033.638,-268.88794 C 1032.039,-269.18524 1029.7802,-269.42213 1027.7942,-269.23169 C 1024.7354,-268.93838 1022.8222,-268.7477 1020.888,-268.57544 C 1018.9537,-268.40318 1019.1993,-268.15307 1017.9817,-268.04419 C 1016.6655,-267.9265 1016.2219,-268.20782 1012.4505,-267.79419 C 1008.9086,-267.40575 1003.4426,-266.58492 1002.1692,-265.91919 C 1000.5703,-266.21389 998.28202,-266.4262 996.29419,-266.23169 C 993.23595,-265.93245 991.35306,-265.75145 989.41919,-265.57544 C 988.7617,-265.5156 988.37915,-265.39688 988.07544,-265.32544 C 987.64779,-265.20649 987.39193,-265.10737 986.70044,-265.04419 C 985.38448,-264.92394 984.94068,-265.23907 981.16919,-264.82544 C 977.61305,-264.43543 972.16365,-263.58628 970.91919,-262.91919 C 969.32056,-263.21338 967.05935,-263.44291 965.07544,-263.23169 C 962.01984,-262.90637 960.1014,-262.70545 958.16919,-262.51294 C 956.23698,-262.32044 956.47932,-262.07206 955.26294,-261.95044 C 953.94806,-261.81898 953.49996,-262.11498 949.73169,-261.66919 C 946.19282,-261.25054 940.75401,-260.37702 939.48169,-259.70044 C 937.88414,-259.98149 935.62173,-260.12087 933.63794,-259.88794 C 930.58596,-259.52958 928.69286,-259.32008 926.76294,-259.10669 C 926.10674,-259.03414 925.72228,-258.934 925.41919,-258.85669 C 924.99242,-258.72947 924.73428,-258.58949 924.04419,-258.51294 C 922.73086,-258.36726 922.27673,-258.68696 918.51294,-258.20044 C 914.96405,-257.74169 909.53431,-256.78142 908.29419,-256.07544 C 906.70114,-256.31968 904.46038,-256.45679 902.48169,-256.20044 C 899.4341,-255.80563 897.53098,-255.55199 895.60669,-255.29419 C 893.68241,-255.0364 893.88058,-254.80066 892.66919,-254.63794 C 891.35973,-254.46204 890.922,-254.74232 887.16919,-254.16919 C 883.6449,-253.63095 878.24604,-252.47002 876.98169,-251.73169 C 875.39419,-251.93523 873.13619,-251.98642 871.16919,-251.63794 C 868.14302,-251.10182 866.2703,-250.77625 864.35669,-250.45044 C 863.70608,-250.33967 863.34298,-250.1795 863.04419,-250.07544 C 862.62352,-249.91056 862.38074,-249.74414 861.70044,-249.60669 C 860.40579,-249.3451 859.97332,-249.61289 856.26294,-248.79419 C 852.76441,-248.02224 847.41699,-246.41126 846.20044,-245.57544 C 844.63766,-245.65289 842.44286,-245.49016 840.51294,-244.98169 C 837.5405,-244.19856 835.69533,-243.7496 833.82544,-243.23169 C 831.95556,-242.71379 832.15884,-242.46441 830.98169,-242.13794 C 829.70923,-241.78504 829.28466,-242.03085 825.63794,-240.95044 C 822.21324,-239.93581 816.9885,-238.01727 815.76294,-237.10669 C 814.22411,-237.09395 812.04311,-236.83447 810.13794,-236.23169 C 807.20688,-235.30435 805.38763,-234.77327 803.54419,-234.16919 C 802.91743,-233.96381 802.55246,-233.77661 802.26294,-233.63794 C 801.85531,-233.42433 801.6096,-233.22919 800.95044,-233.01294 C 799.69598,-232.6014 799.26433,-232.8239 795.66919,-231.57544 C 792.27934,-230.39827 787.07421,-228.36174 785.88794,-227.41919 C 784.36405,-227.35952 782.23789,-227.02432 780.35669,-226.35669 C 777.4593,-225.3284 775.65761,-224.68121 773.82544,-224.04419 C 771.99327,-223.40718 772.19759,-223.19565 771.04419,-222.79419 C 769.79741,-222.36023 769.38058,-222.59447 765.82544,-221.23169 C 762.48677,-219.95189 757.33829,-217.74914 756.13794,-216.76294 C 754.63076,-216.65525 752.50225,-216.26414 750.63794,-215.54419 C 747.76976,-214.43659 746.01414,-213.76263 744.20044,-213.07544 C 743.58378,-212.84181 743.20403,-212.63341 742.91919,-212.48169 C 742.91919,-212.48169 742.91919,-211.38794 742.91919,-211.38794 C 743.03097,-211.6103 743.30518,-212.20537 743.82544,-212.48169 C 744.52341,-212.85241 748.63907,-214.47506 750.63794,-215.20044 C 752.2948,-215.80169 754.79183,-216.52912 756.60669,-216.51294 C 756.90831,-216.51025 757.19431,-216.46204 757.45044,-216.41919 C 759.29293,-216.11094 764.91919,-214.85669 764.91919,-214.85669 C 764.91918,-214.85669 758.6857,-216.50344 757.88794,-216.70044 C 757.69715,-216.74755 757.35222,-216.76916 756.91919,-216.76294 C 758.06465,-217.63265 761.68019,-219.15645 764.26294,-220.20044 C 767.10116,-221.34771 767.37975,-221.45226 769.32544,-221.85669 C 771.33374,-222.27413 772.48169,-222.35669 772.48169,-222.35669 C 772.48169,-222.35668 772.39933,-222.95783 773.45044,-223.48169 C 774.15554,-223.8331 778.33746,-225.37409 780.35669,-226.04419 C 782.30859,-226.69192 785.41409,-227.40269 787.23169,-227.04419 C 789.09492,-226.67669 794.76294,-225.23169 794.76294,-225.23169 C 794.76295,-225.23169 788.47594,-227.1028 787.66919,-227.32544 C 787.47627,-227.37869 787.13835,-227.41148 786.70044,-227.41919 C 787.85878,-228.25207 791.49488,-229.61451 794.10669,-230.57544 C 796.97685,-231.63145 797.27403,-231.73724 799.23169,-232.10669 C 801.08518,-232.45648 802.09053,-232.53217 802.26294,-232.54419 C 802.37654,-232.76143 802.64039,-233.35421 803.16919,-233.60669 C 803.87863,-233.94543 808.09526,-235.31944 810.13794,-235.91919 C 811.83111,-236.4163 814.37871,-236.95596 816.23169,-236.82544 C 816.53964,-236.80376 816.84518,-236.72818 817.10669,-236.66919 C 818.98787,-236.24487 824.70044,-234.63794 824.70044,-234.63794 C 824.70045,-234.63794 818.3587,-236.70319 817.54419,-236.95044 C 817.3494,-237.00958 816.98631,-237.05438 816.54419,-237.07544 C 817.71368,-237.87299 821.40721,-239.13166 824.04419,-240.01294 C 826.942,-240.98141 827.2772,-241.01626 829.26294,-241.29419 C 831.31259,-241.58108 832.45044,-241.60669 832.45044,-241.60669 C 832.45042,-241.60669 832.37769,-242.21366 833.45044,-242.66919 C 834.17004,-242.97476 838.44142,-244.16994 840.51294,-244.66919 C 842.51538,-245.15177 845.71143,-245.59748 847.57544,-245.07544 C 849.48622,-244.54029 855.29419,-242.57544 855.29419,-242.57544 C 855.29419,-242.57544 848.87153,-244.99895 848.04419,-245.29419 C 847.84635,-245.3648 847.46203,-245.43458 847.01294,-245.48169 C 848.20084,-246.21034 851.92821,-247.25577 854.60669,-247.98169 C 857.55011,-248.77944 857.89877,-248.75252 859.91919,-248.88794 C 861.83208,-249.01617 862.86624,-248.95903 863.04419,-248.95044 C 863.16147,-249.1541 863.43595,-249.72992 863.98169,-249.91919 C 864.71388,-250.17313 869.06021,-250.96708 871.16919,-251.29419 C 872.91732,-251.5653 875.57007,-251.77889 877.48169,-251.38794 C 877.79935,-251.32298 878.08691,-251.20243 878.35669,-251.10669 C 880.29743,-250.41796 886.20044,-248.01294 886.20044,-248.01294 C 886.20045,-248.01294 879.66573,-250.96371 878.82544,-251.32544 C 878.62447,-251.41195 878.25031,-251.49223 877.79419,-251.57544 C 879.00069,-252.20862 882.82375,-252.97104 885.54419,-253.48169 C 888.53372,-254.04288 888.84442,-254.01123 890.88794,-254.01294 C 892.9972,-254.01471 894.20044,-253.88794 894.20044,-253.88794 C 894.20044,-253.88793 894.12773,-254.51913 895.23169,-254.82544 C 895.97221,-255.03091 900.35781,-255.65931 902.48169,-255.88794 C 904.53471,-256.10893 907.80032,-256.14016 909.70044,-255.41919 C 911.64823,-254.68012 917.54419,-252.04419 917.54419,-252.04419 C 917.54421,-252.04419 910.98131,-255.22316 910.13794,-255.60669 C 909.93626,-255.69842 909.59573,-255.7929 909.13794,-255.88794 C 910.34886,-256.48982 914.12236,-257.13678 916.85669,-257.54419 C 919.86149,-257.99191 920.1822,-257.99589 922.23169,-257.95044 C 924.17214,-257.90742 925.23868,-257.75621 925.41919,-257.73169 C 925.53811,-257.92485 925.80309,-258.49752 926.35669,-258.63794 C 927.0994,-258.82632 931.51098,-259.37222 933.63794,-259.57544 C 935.40097,-259.74386 938.05803,-259.80973 939.98169,-259.32544 C 940.30137,-259.24496 940.5852,-259.12185 940.85669,-259.01294 C 942.80962,-258.22945 948.76294,-255.54419 948.76294,-255.54419 C 948.76292,-255.54419 942.17103,-258.79767 941.32544,-259.20044 C 941.12322,-259.29676 940.75318,-259.40747 940.29419,-259.51294 C 941.50833,-260.08721 945.33785,-260.63513 948.07544,-261.01294 C 951.08382,-261.42814 951.39851,-261.45557 953.45044,-261.38794 C 955.56842,-261.31813 956.76294,-261.13794 956.76294,-261.13794 C 956.76292,-261.13794 956.68569,-261.77535 957.79419,-262.04419 C 958.53781,-262.22454 962.94595,-262.70774 965.07544,-262.88794 C 967.13391,-263.06211 970.41868,-263.01226 972.32544,-262.23169 C 974.28003,-261.43153 980.20044,-258.70044 980.20044,-258.70044 C 980.20042,-258.70044 973.64051,-262.0092 972.79419,-262.41919 C 972.59182,-262.51724 972.22233,-262.62229 971.76294,-262.73169 C 972.97811,-263.29559 976.77302,-263.84599 979.51294,-264.20044 C 982.52385,-264.58996 982.83425,-264.59809 984.88794,-264.51294 C 986.83233,-264.43234 987.89457,-264.2597 988.07544,-264.23169 C 988.1946,-264.42255 988.45821,-264.977 989.01294,-265.10669 C 989.7572,-265.28069 994.16287,-265.75716 996.29419,-265.91919 C 998.06081,-266.05346 1000.7439,-266.0449 1002.6692,-265.54419 C 1002.9892,-265.46098 1003.2725,-265.34292 1003.5442,-265.23169 C 1005.4988,-264.43153 1011.4505,-261.66919 1011.4505,-261.66919 C 1011.4504,-261.66919 1004.8593,-265.0092 1004.013,-265.41919 C 1003.8106,-265.51724 1003.4411,-265.6223 1002.9817,-265.73169 C 1004.1968,-266.29559 1008.023,-266.81475 1010.763,-267.16919 C 1013.7739,-267.55872 1014.1155,-267.59809 1016.1692,-267.51294 C 1018.2889,-267.42506 1019.4817,-267.20044 1019.4817,-267.20044 C 1019.4817,-267.20044 1019.4033,-267.84946 1020.513,-268.10669 C 1021.2573,-268.27925 1025.6625,-268.73005 1027.7942,-268.88794 C 1029.8548,-269.04054 1033.1371,-268.98471 1035.0442,-268.20044 C 1036.9992,-267.39649 1042.9192,-264.70044 1042.9192,-264.70044 C 1042.9192,-264.70044 1036.3594,-267.97631 1035.513,-268.38794 C 1035.3105,-268.48638 1034.9412,-268.59016 1034.4817,-268.70044 C 1035.6971,-269.26198 1039.4936,-269.82822 1042.2317,-270.20044 C 1045.2407,-270.60949 1045.5544,-270.61602 1047.6067,-270.54419 C 1049.5498,-270.4762 1050.6139,-270.37934 1050.7942,-270.35669 C 1050.913,-270.55109 1051.1788,-271.0855 1051.7317,-271.23169 C 1052.4735,-271.42781 1056.8628,-272.06047 1058.9817,-272.32544 C 1060.7381,-272.54505 1063.387,-272.65775 1065.2942,-272.29419 C 1065.6111,-272.23378 1065.9,-272.10481 1066.1692,-272.01294 C 1068.1054,-271.35202 1074.013,-269.07544 1074.013,-269.07544 C 1074.0129,-269.07544 1067.4763,-271.88199 1066.638,-272.23169 C 1066.4375,-272.31532 1066.0618,-272.40502 1065.6067,-272.48169 C 1066.8104,-273.13215 1070.6258,-273.85364 1073.3255,-274.48169 C 1076.2922,-275.17189 1076.6144,-275.23676 1078.638,-275.35669 C 1080.7266,-275.48049 1081.9192,-275.38794 1081.9192,-275.38794 C 1081.9192,-275.38793 1081.8322,-276.01999 1082.9192,-276.41919 C 1083.6484,-276.68699 1087.9664,-277.75716 1090.0442,-278.23169 C 1092.0527,-278.69038 1095.2121,-279.26099 1097.0442,-278.85669 C 1098.9223,-278.44223 1110.6224,-275.84106 1110.6224,-275.84106 C 1110.6224,-275.84106 1098.2949,-278.86372 1097.4817,-279.10669 C 1097.2872,-279.16481 1096.9231,-279.21295 1096.4817,-279.23169 C 1097.6493,-280.03538 1099.9959,-280.91899 1102.5911,-281.93481 C 1104.2725,-282.59299 1103.5148,-282.3114 1105.367,-282.93841 C 1107.1206,-283.53207 1107.8524,-283.94912 1107.9974,-284.0514 C 1108.3435,-284.25791 1107.6414,-284.17328 1107.4532,-284.0938 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7333);enable-background:new"
+           sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
+        <path
+           id="path8175"
+           d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7285);enable-background:new" />
+        <path
+           id="path8177"
+           d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7289);enable-background:new" />
+        <path
+           id="path8179"
+           d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7293);enable-background:new" />
+        <path
+           id="path8181"
+           d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.28,-280.90569 1114.4166,-279.4553 C 1114.5532,-278.00491 1114.6066,-276.5951 1114.3286,-275.98666 C 1114.0505,-275.37821 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1113.9828,-275.27892 1114.0444,-274.43446 C 1114.1037,-273.62108 1113.9112,-272.79477 1113.5246,-271.62884 C 1113.1334,-270.44883 1111.6794,-267.27886 1111.2389,-267.03007 C 1110.7866,-266.77456 1110.5075,-266.75969 1110.1719,-266.89063 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7337);enable-background:new"
+           sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
+        <path
+           id="path8183"
+           d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7297);enable-background:new" />
+        <path
+           id="path8185"
+           d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7301);enable-background:new" />
+        <path
+           id="path8187"
+           d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7305);enable-background:new" />
+        <path
+           id="path8189"
+           d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7309);enable-background:new" />
+        <path
+           id="path8191"
+           d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7313);enable-background:new" />
+        <path
+           id="path8193"
+           d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7317);enable-background:new" />
+        <path
+           id="path8195"
+           d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7321);enable-background:new" />
+        <path
+           id="path8197"
+           d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7329);enable-background:new" />
+        <path
+           id="path8199"
+           d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7325);enable-background:new" />
+      </g>
+    </g>
+    <path
+       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 863.87812,475.6679 C 865.52024,472.4499 867.39593,469.93261 868.73948,465.81892 C 869.5382,462.16103 872.05152,463.78819 875.99995,457.42202 C 877.40188,455.18252 881.47648,457.81338 884.96505,455.02291 C 886.23577,454.21972 887.84993,454.6186 889.44761,454.95978 C 893.213,456.27874 895.27337,458.66333 897.78137,460.76815 C 903.92043,466.73838 918.31551,468.71142 921.26741,467.08161 C 922.70146,464.17687 929.14869,461.67273 933.64178,455.96993 C 934.38989,454.84726 945.37114,447.22547 948.28899,449.40394"
+       id="path8201"
+       sodipodi:nodetypes="ccccccccc" />
+    <path
+       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 888.50059,465.25071 C 895.864,462.01774 902.31149,456.34231 909.20872,451.86619 C 912.51929,449.89665 916.07855,455.0822 920.00472,455.46485 C 922.30245,455.24672 923.71762,456.66744 925.68683,457.10635 C 930.84319,458.42414 928.08476,460.97123 935.66209,463.54607 C 941.8177,465.26647 944.56949,456.7476 950.56184,456.22247 C 955.43923,455.71948 958.66076,455.90644 962.17859,455.96993 C 966.10555,456.10882 966.25714,452.47233 968.23951,450.66663 C 971.22007,447.86141 975.39512,448.81691 978.38436,445.92573 C 979.4019,444.54105 980.33894,442.91488 981.11895,440.81764 C 982.00096,438.8173 984.15901,441.12362 985.91718,442.08033"
+       id="path8203"
+       sodipodi:nodetypes="ccccccccccc" />
+  </g>
+  <g
+     inkscape:groupmode="layer"
+     id="layer15"
+     inkscape:label="Feet"
+     style="display:inline">
+    <path
+       style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9048);enable-background:accumulate"
+       d="M 403.27922,1056.3058 L 459.84776,1013.8794 L 531.97265,1028.0215 L 485.30361,1080.3474 L 431.56349,1087.4185 L 403.27922,1056.3058 z"
+       id="path8994" />
+    <path
+       style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 542.27183,1060.5719 C 540.86456,1079.3731 541.12693,1093.3229 544.35357,1109.8752 C 547.58023,1126.4275 560.75966,1155.7825 564.68798,1173.0589 C 568.61419,1190.326 567.38211,1211.3686 552.22854,1224.2072 C 536.91093,1237.1846 510.17726,1245.8061 484.39623,1239.9409 C 458.61518,1234.0757 414.84716,1190.7175 395.80604,1169.7126 C 376.6939,1148.6293 332.04518,1075.862 317.86751,1045.4368 C 303.68984,1015.0117 305.2079,1008.7182 309.74779,999.90708 C 300.38107,975.38658 297.33408,949.84027 276.03534,924.33044 C 306.36081,927.44488 319.91562,951.28677 336.16102,971.47019 C 330.63113,923.39416 318.10631,907.05369 307.78707,880.74589 C 337.78137,886.82754 358.36643,912.61828 371.76686,953.45839 C 381.32101,949.54048 390.00462,944.08545 401.95427,944.39719 C 390.65677,902.70139 384.00481,874.48135 365.26702,843.32725 C 418.70898,848.99758 448.92404,923.96657 444.23844,931.28805 C 454.21641,929.04406 463.24409,924.75767 474.67497,925.63638 C 463.426,887.28936 453.62716,848.76848 471.01526,806.98819 C 471.01526,806.98819 519.30204,872.42507 525.40492,892.79397 C 531.50779,913.16287 526.92373,931.49448 526.92373,931.49448 C 526.92373,931.49448 543.8833,962.57978 547.21765,982.58862 C 550.59075,1002.83 543.68496,1041.6919 542.27183,1060.5719 z"
+       id="path4189"
+       sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+    <path
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate"
+       d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z"
+       id="path4191"
+       sodipodi:nodetypes="cccccccccccccccccccccc"
+       clip-path="url(#clipPath3631)"
+       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
+    <path
+       style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new"
+       d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.12313,994.71481 758.22835,1018.3614 C 751.62344,1031.4918 739.70002,1075.8473 727.105,1094.6079 C 714.50998,1113.3684 698.57363,1134.3752 689.93296,1139.0288 C 668.44244,1150.603 645.37702,1164.5347 629.31407,1157.1183 C 614.93921,1150.4813 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z"
+       id="path4193"
+       clip-path="url(#clipPath3677)"
+       sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc"
+       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
+    <g
+       id="g3617"
+       clip-path="url(#clipPath3622)"
+       transform="translate(276,136)">
+      <path
+         transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-52.200498,74.09707)"
+         id="path4195"
+         d="M -15.66751,843.48852 L -65.16499,827.93217 L -92.03504,880.25807 L -51.02285,925.51291 L -1.52538,887.32914 L -15.66751,843.48852 z"
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" />
+      <path
+         sodipodi:nodetypes="ccccccccccccc"
+         transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-46.92842,75.511284)"
+         id="path4197"
+         d="M 118.70648,859.93048 L 63.552152,813.26144 L 19.711532,850.03099 L 53.652662,903.7711 L 40.055848,989.23313 L 0.61048221,1017.5253 L -40.401718,1028.839 L -43.230138,1075.508 L 13.338402,1100.9639 L 32.282389,1031.3139 L 55.738939,972.45727 L 102.08648,899.84236 L 118.70648,859.93048 z"
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" />
+    </g>
+    <path
+       style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate"
+       d="M -70.82184,932.58397 L -10.01066,905.71392 L 90.3985,936.82662 L 26.75889,967.93931 L -55.26549,950.96875 L -70.82184,932.58397 z"
+       id="path4199"
+       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,229.07158,211.51128)" />
+    <path
+       style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4105);enable-background:new"
+       d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 800.79359,848.79859 799.18454,870.87536 C 790.40075,873.21707 802.03289,873.1989 802.65329,874.93786 C 810.5764,885.50366 807.31628,899.34258 806.28494,911.2912 C 799.22089,956.32475 784.14263,998.65314 770.33139,1041.971 C 758.25663,1074.9203 742.95719,1100.8235 722.44331,1129.1725 C 711.49074,1142.7239 699.19859,1157.0238 681.59956,1161.6725 C 661.44355,1167.9138 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 604.6766,1077.5203 604.14834,1062.5406 C 603.6101,1047.2777 601.85699,1031.9759 597.60573,1015.6743 C 593.35447,999.37268 588.56248,990.75636 581.48667,974.10092 C 574.24556,957.05636 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z"
+       id="path4201"
+       sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
+       clip-path="url(#clipPath4177)"
+       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
+    <path
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate"
+       d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z"
+       id="path4203"
+       sodipodi:nodetypes="cccccccc"
+       clip-path="url(#clipPath3631)"
+       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
+    <path
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate"
+       d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z"
+       id="path4205"
+       sodipodi:nodetypes="cccccccc"
+       clip-path="url(#clipPath3631)"
+       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
+    <g
+       id="g8317"
+       style="filter:url(#filter8333)"
+       clip-path="url(#clipPath8338)"
+       transform="translate(276,136)">
+      <path
+         transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
+         clip-path="none"
+         sodipodi:nodetypes="ccccc"
+         id="path4209"
+         d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z"
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+      <rect
+         y="757.19519"
+         x="-55"
+         height="177"
+         width="182"
+         id="rect8315"
+         style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+    </g>
+    <g
+       id="g8346"
+       style="filter:url(#filter8354)"
+       clip-path="url(#clipPath8359)"
+       transform="translate(276,136)">
+      <path
+         transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
+         clip-path="none"
+         sodipodi:nodetypes="ccccccc"
+         id="path4207"
+         d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z"
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+      <rect
+         y="696.19519"
+         x="-22"
+         height="176"
+         width="165"
+         id="rect8344"
+         style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+    </g>
+  </g>
+  <g
+     inkscape:groupmode="layer"
+     id="layer16"
+     inkscape:label="Left Foot"
+     style="display:inline">
+    <path
+       style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 1036.164,1071.8338 C 1042.9581,1090.7366 1046.6577,1105.1335 1048.0543,1123.0457 C 1049.4509,1140.958 1044.2716,1174.8465 1045.1538,1193.7018 C 1046.0356,1212.547 1053.2875,1233.8008 1072.4984,1242.6707 C 1091.9173,1251.6365 1121.8177,1252.882 1146.6183,1239.5251 C 1171.4189,1226.1681 1204.0193,1169.1996 1217.5925,1142.2164 C 1231.2164,1115.1325 1256.3536,1027.719 1262.2533,992.44781 C 1268.1531,957.1766 1264.8039,951.14704 1257.6359,943.39232 C 1260.2762,915.55217 1256.1361,888.45689 1270.7455,856.20614 C 1240.4965,868.03184 1233.3632,896.36684 1222.4266,921.71122 C 1214.4257,870.77829 1222.6358,850.43803 1225.7455,820.49186 C 1196.6808,835.26977 1182.884,867.60588 1180.7455,913.349 C 1169.8216,912.0448 1159.3541,908.91477 1147.1741,912.63471 C 1146.9101,866.61137 1145.7106,835.7453 1156.0847,798.42822 C 1102.8293,819.45508 1093.1375,905.02232 1100.0312,911.20614 C 1089.1484,911.74114 1078.6602,909.90884 1067.1741,914.06329 C 1067.813,871.49194 1066.9136,829.15468 1037.1741,791.20614 C 1037.1741,791.20614 1006.2161,872.12848 1005.7455,894.77757 C 1005.275,917.42666 1015.1971,934.94345 1015.1971,934.94345 C 1015.1971,934.94345 1006.6291,971.68396 1008.8985,993.17568 C 1011.1944,1014.9171 1029.3414,1052.8519 1036.164,1071.8338 z"
+       id="path8848"
+       sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+    <path
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate"
+       d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z"
+       id="path3635"
+       sodipodi:nodetypes="cccccccccccccccccccccc"
+       clip-path="url(#clipPath3631)"
+       transform="translate(276,136)" />
+    <path
+       transform="translate(450.03125,73.843964)"
+       style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new"
+       d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.17603,1040.0409 758.28125,1063.6875 C 751.67634,1076.8179 740.25127,1097.5832 727.65625,1116.3438 C 715.06123,1135.1043 700.29692,1151.8776 691.65625,1156.5312 C 670.16573,1168.1054 642.87545,1166.7914 626.8125,1159.375 C 612.43764,1152.738 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z"
+       id="path3669"
+       clip-path="url(#clipPath3677)"
+       sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc" />
+    <g
+       id="g3628"
+       clip-path="url(#clipPath3636)"
+       transform="translate(276,136)">
+      <path
+         id="path8988"
+         d="M 824.48651,818.48242 L 774.98903,802.92607 L 748.11898,855.25197 L 789.13117,900.50681 L 838.62864,862.32304 L 824.48651,818.48242 z"
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" />
+      <path
+         id="path8990"
+         d="M 964.49365,855.25197 L 909.33932,808.58293 L 865.4987,845.35248 L 899.43983,899.09259 L 906.51089,965.56063 L 855.59921,1000.916 L 814.58701,1012.2297 L 811.75859,1058.8987 L 868.32713,1084.3546 L 931.96674,1007.987 L 956.00837,913.23473 L 964.49365,855.25197 z"
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" />
+    </g>
+    <path
+       style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate"
+       d="M 1045.3322,1043.5779 L 1106.1434,1016.7078 L 1206.5525,1047.8205 L 1142.9129,1078.9332 L 1060.8885,1061.9626 L 1045.3322,1043.5779 z"
+       id="path8992" />
+    <path
+       transform="translate(450.03125,73.843964)"
+       style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4185);enable-background:new"
+       d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 804.67155,848.82948 803.0625,870.90625 C 801.75012,872.28304 805.91085,873.22979 806.53125,874.96875 C 814.45436,885.53455 809.65419,899.80024 808.62285,911.74886 C 801.5588,956.78241 786.85732,1000.1282 773.04608,1043.446 C 760.97132,1076.3953 742.32638,1106.526 721.8125,1134.875 C 710.85993,1148.4264 698.56778,1162.7263 680.96875,1167.375 C 660.81274,1173.6163 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 602.10985,1078.2316 607.65521,1063.2271 C 613.20056,1048.2226 610.12626,1031.8954 605.875,1015.5938 C 601.62374,999.2922 593.69597,989.33378 584.05342,973.38963 C 574.41087,957.44548 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z"
+       id="path4149"
+       sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
+       clip-path="url(#clipPath4177)" />
+    <path
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate"
+       d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z"
+       id="path3902"
+       sodipodi:nodetypes="cccccccc"
+       clip-path="url(#clipPath3631)"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate"
+       d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z"
+       id="path4135"
+       sodipodi:nodetypes="cccccccc"
+       clip-path="url(#clipPath3631)"
+       transform="translate(276,136)" />
+    <g
+       id="g8367"
+       style="filter:url(#filter8379)"
+       clip-path="url(#clipPath8392)"
+       transform="translate(276,136)">
+      <path
+         clip-path="none"
+         sodipodi:nodetypes="ccccccc"
+         id="path4145"
+         d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z"
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+      <rect
+         y="650.19098"
+         x="877.51953"
+         height="172.53406"
+         width="123.03658"
+         id="rect8365"
+         style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+    </g>
+    <g
+       id="g8400"
+       style="filter:url(#filter8404)"
+       clip-path="url(#clipPath8417)"
+       transform="translate(276,136)">
+      <path
+         clip-path="none"
+         sodipodi:nodetypes="ccccc"
+         id="path4147"
+         d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z"
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+      <rect
+         y="677.06104"
+         x="924.89569"
+         height="125.1579"
+         width="142.12846"
+         id="rect8398"
+         style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+    </g>
+  </g>
+</svg>
diff --git a/Documentation/logo.txt b/Documentation/logo.txt
index 296f0f7f67e..a2e62445e28 100644
--- a/Documentation/logo.txt
+++ b/Documentation/logo.txt
@@ -1,13 +1,4 @@
-This is the full-colour version of the currently unofficial Linux logo
-("currently unofficial" just means that there has been no paperwork and
-that I have not really announced it yet).  It was created by Larry Ewing,
-and is freely usable as long as you acknowledge Larry as the original
-artist. 
-
-Note that there are black-and-white versions of this available that
-scale down to smaller sizes and are better for letterheads or whatever
-you want to use it for: for the full range of logos take a look at
-Larry's web-page:
-
-	http://www.isc.tamu.edu/~lewing/linux/
+Tux is taking a three month sabbatical to work as a barber, so Tuz is
+standing in.  He's taken pains to ensure you'll hardly notice.
 
+Image by Andrew McGown and Josh Bush.  Image is licensed CC BY-SA.
diff --git a/Documentation/md.txt b/Documentation/md.txt
index 1da9d1b1793..4edd39ec7db 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -164,15 +164,19 @@ All md devices contain:
   raid_disks
      a text file with a simple number indicating the number of devices
      in a fully functional array.  If this is not yet known, the file
-     will be empty.  If an array is being resized (not currently
-     possible) this will contain the larger of the old and new sizes.
-     Some raid level (RAID1) allow this value to be set while the
-     array is active.  This will reconfigure the array.   Otherwise
-     it can only be set while assembling an array.
+     will be empty.  If an array is being resized this will contain
+     the new number of devices.
+     Some raid levels allow this value to be set while the array is
+     active.  This will reconfigure the array.   Otherwise it can only
+     be set while assembling an array.
+     A change to this attribute will not be permitted if it would
+     reduce the size of the array.  To reduce the number of drives
+     in an e.g. raid5, the array size must first be reduced by
+     setting the 'array_size' attribute.
 
   chunk_size
-     This is the size if bytes for 'chunks' and is only relevant to
-     raid levels that involve striping (1,4,5,6,10). The address space
+     This is the size in bytes for 'chunks' and is only relevant to
+     raid levels that involve striping (0,4,5,6,10). The address space
      of the array is conceptually divided into chunks and consecutive
      chunks are striped onto neighbouring devices.
      The size should be at least PAGE_SIZE (4k) and should be a power
@@ -183,6 +187,20 @@ All md devices contain:
      simply a number that is interpretted differently by different
      levels.  It can be written while assembling an array.
 
+  array_size
+     This can be used to artificially constrain the available space in
+     the array to be less than is actually available on the combined
+     devices.  Writing a number (in Kilobytes) which is less than
+     the available size will set the size.  Any reconfiguration of the
+     array (e.g. adding devices) will not cause the size to change.
+     Writing the word 'default' will cause the effective size of the
+     array to be whatever size is actually available based on
+     'level', 'chunk_size' and 'component_size'.
+
+     This can be used to reduce the size of the array before reducing
+     the number of devices in a raid4/5/6, or to support external
+     metadata formats which mandate such clipping.
+
   reshape_position
      This is either "none" or a sector number within the devices of
      the array where "reshape" is up to.  If this is set, the three
@@ -207,6 +225,11 @@ All md devices contain:
      about the array.  It can be 0.90 (traditional format), 1.0, 1.1,
      1.2 (newer format in varying locations) or "none" indicating that
      the kernel isn't managing metadata at all.
+     Alternately it can be "external:" followed by a string which
+     is set by user-space.  This indicates that metadata is managed
+     by a user-space program.  Any device failure or other event that
+     requires a metadata update will cause array activity to be
+     suspended until the event is acknowledged.
 
   resync_start
      The point at which resync should start.  If no resync is needed,
diff --git a/Documentation/misc-devices/isl29003 b/Documentation/misc-devices/isl29003
new file mode 100644
index 00000000000..c4ff5f38e01
--- /dev/null
+++ b/Documentation/misc-devices/isl29003
@@ -0,0 +1,62 @@
+Kernel driver isl29003
+=====================
+
+Supported chips:
+* Intersil ISL29003
+Prefix: 'isl29003'
+Addresses scanned: none
+Datasheet:
+http://www.intersil.com/data/fn/fn7464.pdf
+
+Author: Daniel Mack <daniel@caiaq.de>
+
+
+Description
+-----------
+The ISL29003 is an integrated light sensor with a 16-bit integrating type
+ADC, I2C user programmable lux range select for optimized counts/lux, and
+I2C multi-function control and monitoring capabilities. The internal ADC
+provides 16-bit resolution while rejecting 50Hz and 60Hz flicker caused by
+artificial light sources.
+
+The driver allows to set the lux range, the bit resolution, the operational
+mode (see below) and the power state of device and can read the current lux
+value, of course.
+
+
+Detection
+---------
+
+The ISL29003 does not have an ID register which could be used to identify
+it, so the detection routine will just try to read from the configured I2C
+addess and consider the device to be present as soon as it ACKs the
+transfer.
+
+
+Sysfs entries
+-------------
+
+range:
+	0: 0 lux to 1000 lux (default)
+	1: 0 lux to 4000 lux
+	2: 0 lux to 16,000 lux
+	3: 0 lux to 64,000 lux
+
+resolution:
+	0: 2^16 cycles (default)
+	1: 2^12 cycles
+	2: 2^8 cycles
+	3: 2^4 cycles
+
+mode:
+	0: diode1's current (unsigned 16bit) (default)
+	1: diode1's current (unsigned 16bit)
+	2: difference between diodes (l1 - l2, signed 15bit)
+
+power_state:
+	0: device is disabled (default)
+	1: device is enabled
+
+lux (read only):
+	returns the value from the last sensor reading
+
diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt
index 7a3bb1abb83..b132e4a3cf0 100644
--- a/Documentation/networking/dccp.txt
+++ b/Documentation/networking/dccp.txt
@@ -141,7 +141,8 @@ rx_ccid = 2
 	Default CCID for the receiver-sender half-connection; see tx_ccid.
 
 seq_window = 100
-	The initial sequence window (sec. 7.5.2).
+	The initial sequence window (sec. 7.5.2) of the sender. This influences
+	the local ackno validity and the remote seqno validity windows (7.5.1).
 
 tx_qlen = 5
 	The size of the transmit buffer in packets. A value of 0 corresponds
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index c7712787933..ec5de02f543 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -2,7 +2,7 @@
 
 ip_forward - BOOLEAN
 	0 - disabled (default)
-	not 0 - enabled 
+	not 0 - enabled
 
 	Forward Packets between interfaces.
 
@@ -36,49 +36,49 @@ rt_cache_rebuild_count - INTEGER
 IP Fragmentation:
 
 ipfrag_high_thresh - INTEGER
-	Maximum memory used to reassemble IP fragments. When 
+	Maximum memory used to reassemble IP fragments. When
 	ipfrag_high_thresh bytes of memory is allocated for this purpose,
 	the fragment handler will toss packets until ipfrag_low_thresh
 	is reached.
-	
+
 ipfrag_low_thresh - INTEGER
-	See ipfrag_high_thresh	
+	See ipfrag_high_thresh
 
 ipfrag_time - INTEGER
-	Time in seconds to keep an IP fragment in memory.	
+	Time in seconds to keep an IP fragment in memory.
 
 ipfrag_secret_interval - INTEGER
-	Regeneration interval (in seconds) of the hash secret (or lifetime 
+	Regeneration interval (in seconds) of the hash secret (or lifetime
 	for the hash secret) for IP fragments.
 	Default: 600
 
 ipfrag_max_dist - INTEGER
-	ipfrag_max_dist is a non-negative integer value which defines the 
-	maximum "disorder" which is allowed among fragments which share a 
-	common IP source address. Note that reordering of packets is 
-	not unusual, but if a large number of fragments arrive from a source 
-	IP address while a particular fragment queue remains incomplete, it 
-	probably indicates that one or more fragments belonging to that queue 
-	have been lost. When ipfrag_max_dist is positive, an additional check 
-	is done on fragments before they are added to a reassembly queue - if 
-	ipfrag_max_dist (or more) fragments have arrived from a particular IP 
-	address between additions to any IP fragment queue using that source 
-	address, it's presumed that one or more fragments in the queue are 
-	lost. The existing fragment queue will be dropped, and a new one 
+	ipfrag_max_dist is a non-negative integer value which defines the
+	maximum "disorder" which is allowed among fragments which share a
+	common IP source address. Note that reordering of packets is
+	not unusual, but if a large number of fragments arrive from a source
+	IP address while a particular fragment queue remains incomplete, it
+	probably indicates that one or more fragments belonging to that queue
+	have been lost. When ipfrag_max_dist is positive, an additional check
+	is done on fragments before they are added to a reassembly queue - if
+	ipfrag_max_dist (or more) fragments have arrived from a particular IP
+	address between additions to any IP fragment queue using that source
+	address, it's presumed that one or more fragments in the queue are
+	lost. The existing fragment queue will be dropped, and a new one
 	started. An ipfrag_max_dist value of zero disables this check.
 
 	Using a very small value, e.g. 1 or 2, for ipfrag_max_dist can
 	result in unnecessarily dropping fragment queues when normal
-	reordering of packets occurs, which could lead to poor application 
-	performance. Using a very large value, e.g. 50000, increases the 
-	likelihood of incorrectly reassembling IP fragments that originate 
+	reordering of packets occurs, which could lead to poor application
+	performance. Using a very large value, e.g. 50000, increases the
+	likelihood of incorrectly reassembling IP fragments that originate
 	from different IP datagrams, which could result in data corruption.
 	Default: 64
 
 INET peer storage:
 
 inet_peer_threshold - INTEGER
-	The approximate size of the storage.  Starting from this threshold	
+	The approximate size of the storage.  Starting from this threshold
 	entries will be thrown aggressively.  This threshold also determines
 	entries' time-to-live and time intervals between garbage collection
 	passes.  More entries, less time-to-live, less GC interval.
@@ -105,7 +105,7 @@ inet_peer_gc_maxtime - INTEGER
 	in effect under low (or absent) memory pressure on the pool.
 	Measured in seconds.
 
-TCP variables: 
+TCP variables:
 
 somaxconn - INTEGER
 	Limit of socket listen() backlog, known in userspace as SOMAXCONN.
@@ -310,7 +310,7 @@ tcp_orphan_retries - INTEGER
 
 tcp_reordering - INTEGER
 	Maximal reordering of packets in a TCP stream.
-	Default: 3	
+	Default: 3
 
 tcp_retrans_collapse - BOOLEAN
 	Bug-to-bug compatibility with some broken printers.
@@ -521,7 +521,7 @@ IP Variables:
 
 ip_local_port_range - 2 INTEGERS
 	Defines the local port range that is used by TCP and UDP to
-	choose the local port. The first number is the first, the 
+	choose the local port. The first number is the first, the
 	second the last local port number. Default value depends on
 	amount of memory available on the system:
 	> 128Mb 32768-61000
@@ -594,12 +594,12 @@ icmp_errors_use_inbound_ifaddr - BOOLEAN
 
 	If zero, icmp error messages are sent with the primary address of
 	the exiting interface.
- 
+
 	If non-zero, the message will be sent with the primary address of
 	the interface that received the packet that caused the icmp error.
 	This is the behaviour network many administrators will expect from
 	a router. And it can make debugging complicated network layouts
-	much easier. 
+	much easier.
 
 	Note that if no primary address exists for the interface selected,
 	then the primary address of the first non-loopback interface that
@@ -611,7 +611,7 @@ igmp_max_memberships - INTEGER
 	Change the maximum number of multicast groups we can subscribe to.
 	Default: 20
 
-conf/interface/*  changes special settings per interface (where "interface" is 
+conf/interface/*  changes special settings per interface (where "interface" is
 		  the name of your network interface)
 conf/all/*	  is special, changes the settings for all interfaces
 
@@ -625,11 +625,11 @@ log_martians - BOOLEAN
 accept_redirects - BOOLEAN
 	Accept ICMP redirect messages.
 	accept_redirects for the interface will be enabled if:
-	- both conf/{all,interface}/accept_redirects are TRUE in the case forwarding
-	  for the interface is enabled
+	- both conf/{all,interface}/accept_redirects are TRUE in the case
+	  forwarding for the interface is enabled
 	or
-	- at least one of conf/{all,interface}/accept_redirects is TRUE in the case
-	  forwarding for the interface is disabled
+	- at least one of conf/{all,interface}/accept_redirects is TRUE in the
+	  case forwarding for the interface is disabled
 	accept_redirects for the interface will be disabled otherwise
 	default TRUE (host)
 		FALSE (router)
@@ -640,8 +640,8 @@ forwarding - BOOLEAN
 mc_forwarding - BOOLEAN
 	Do multicast routing. The kernel needs to be compiled with CONFIG_MROUTE
 	and a multicast routing daemon is required.
-	conf/all/mc_forwarding must also be set to TRUE to enable multicast routing
-	for the interface
+	conf/all/mc_forwarding must also be set to TRUE to enable multicast
+	routing	for the interface
 
 medium_id - INTEGER
 	Integer value used to differentiate the devices by the medium they
@@ -649,7 +649,7 @@ medium_id - INTEGER
 	the broadcast packets are received only on one of them.
 	The default value 0 means that the device is the only interface
 	to its medium, value of -1 means that medium is not known.
-	
+
 	Currently, it is used to change the proxy_arp behavior:
 	the proxy_arp feature is enabled for packets forwarded between
 	two devices attached to different media.
@@ -699,16 +699,22 @@ accept_source_route - BOOLEAN
 	default TRUE (router)
 		FALSE (host)
 
-rp_filter - BOOLEAN
-	1 - do source validation by reversed path, as specified in RFC1812
-	    Recommended option for single homed hosts and stub network
-	    routers. Could cause troubles for complicated (not loop free)
-	    networks running a slow unreliable protocol (sort of RIP),
-	    or using static routes.
-
+rp_filter - INTEGER
 	0 - No source validation.
-
-	conf/all/rp_filter must also be set to TRUE to do source validation
+	1 - Strict mode as defined in RFC3704 Strict Reverse Path
+	    Each incoming packet is tested against the FIB and if the interface
+	    is not the best reverse path the packet check will fail.
+	    By default failed packets are discarded.
+	2 - Loose mode as defined in RFC3704 Loose Reverse Path
+	    Each incoming packet's source address is also tested against the FIB
+	    and if the source address is not reachable via any interface
+	    the packet check will fail.
+
+	Current recommended practice in RFC3704 is to enable strict mode
+	to prevent IP spoofing from DDos attacks. If using asymmetric routing
+	or other complicated routing, then loose mode is recommended.
+
+	conf/all/rp_filter must also be set to non-zero to do source validation
 	on the interface
 
 	Default value is 0. Note that some distributions enable it
@@ -782,6 +788,12 @@ arp_ignore - INTEGER
 	The max value from conf/{all,interface}/arp_ignore is used
 	when ARP request is received on the {interface}
 
+arp_notify - BOOLEAN
+	Define mode for notification of address and device changes.
+	0 - (default): do nothing
+	1 - Generate gratuitous arp replies when device is brought up
+	    or hardware address changes.
+
 arp_accept - BOOLEAN
 	Define behavior when gratuitous arp replies are received:
 	0 - drop gratuitous arp frames
@@ -823,7 +835,7 @@ apply to IPv6 [XXX?].
 
 bindv6only - BOOLEAN
 	Default value for IPV6_V6ONLY socket option,
-	which restricts use of the IPv6 socket to IPv6 communication 
+	which restricts use of the IPv6 socket to IPv6 communication
 	only.
 		TRUE: disable IPv4-mapped address feature
 		FALSE: enable IPv4-mapped address feature
@@ -833,19 +845,19 @@ bindv6only - BOOLEAN
 IPv6 Fragmentation:
 
 ip6frag_high_thresh - INTEGER
-	Maximum memory used to reassemble IPv6 fragments. When 
+	Maximum memory used to reassemble IPv6 fragments. When
 	ip6frag_high_thresh bytes of memory is allocated for this purpose,
 	the fragment handler will toss packets until ip6frag_low_thresh
 	is reached.
-	
+
 ip6frag_low_thresh - INTEGER
-	See ip6frag_high_thresh	
+	See ip6frag_high_thresh
 
 ip6frag_time - INTEGER
 	Time in seconds to keep an IPv6 fragment in memory.
 
 ip6frag_secret_interval - INTEGER
-	Regeneration interval (in seconds) of the hash secret (or lifetime 
+	Regeneration interval (in seconds) of the hash secret (or lifetime
 	for the hash secret) for IPv6 fragments.
 	Default: 600
 
@@ -854,17 +866,17 @@ conf/default/*:
 
 
 conf/all/*:
-	Change all the interface-specific settings.  
+	Change all the interface-specific settings.
 
 	[XXX:  Other special features than forwarding?]
 
 conf/all/forwarding - BOOLEAN
-	Enable global IPv6 forwarding between all interfaces.  
+	Enable global IPv6 forwarding between all interfaces.
 
-	IPv4 and IPv6 work differently here; e.g. netfilter must be used 
+	IPv4 and IPv6 work differently here; e.g. netfilter must be used
 	to control which interfaces may forward packets and which not.
 
-	This also sets all interfaces' Host/Router setting 
+	This also sets all interfaces' Host/Router setting
 	'forwarding' to the specified value.  See below for details.
 
 	This referred to as global forwarding.
@@ -875,12 +887,12 @@ proxy_ndp - BOOLEAN
 conf/interface/*:
 	Change special settings per interface.
 
-	The functional behaviour for certain settings is different 
+	The functional behaviour for certain settings is different
 	depending on whether local forwarding is enabled or not.
 
 accept_ra - BOOLEAN
 	Accept Router Advertisements; autoconfigure using them.
-	
+
 	Functional default: enabled if local forwarding is disabled.
 			    disabled if local forwarding is enabled.
 
@@ -926,7 +938,7 @@ accept_source_route - INTEGER
 	Default: 0
 
 autoconf - BOOLEAN
-	Autoconfigure addresses using Prefix Information in Router 
+	Autoconfigure addresses using Prefix Information in Router
 	Advertisements.
 
 	Functional default: enabled if accept_ra_pinfo is enabled.
@@ -935,11 +947,11 @@ autoconf - BOOLEAN
 dad_transmits - INTEGER
 	The amount of Duplicate Address Detection probes to send.
 	Default: 1
-	
+
 forwarding - BOOLEAN
-	Configure interface-specific Host/Router behaviour.  
+	Configure interface-specific Host/Router behaviour.
 
-	Note: It is recommended to have the same setting on all 
+	Note: It is recommended to have the same setting on all
 	interfaces; mixed router/host scenarios are rather uncommon.
 
 	FALSE:
@@ -948,13 +960,13 @@ forwarding - BOOLEAN
 
 	1. IsRouter flag is not set in Neighbour Advertisements.
 	2. Router Solicitations are being sent when necessary.
-	3. If accept_ra is TRUE (default), accept Router 
+	3. If accept_ra is TRUE (default), accept Router
 	   Advertisements (and do autoconfiguration).
 	4. If accept_redirects is TRUE (default), accept Redirects.
 
 	TRUE:
 
-	If local forwarding is enabled, Router behaviour is assumed. 
+	If local forwarding is enabled, Router behaviour is assumed.
 	This means exactly the reverse from the above:
 
 	1. IsRouter flag is set in Neighbour Advertisements.
@@ -989,7 +1001,7 @@ router_solicitation_interval - INTEGER
 	Default: 4
 
 router_solicitations - INTEGER
-	Number of Router Solicitations to send until assuming no 
+	Number of Router Solicitations to send until assuming no
 	routers are present.
 	Default: 3
 
@@ -1013,11 +1025,11 @@ temp_prefered_lft - INTEGER
 
 max_desync_factor - INTEGER
 	Maximum value for DESYNC_FACTOR, which is a random value
-	that ensures that clients don't synchronize with each 
+	that ensures that clients don't synchronize with each
 	other and generate new addresses at exactly the same time.
 	value is in seconds.
 	Default: 600
-	
+
 regen_max_retry - INTEGER
 	Number of attempts before give up attempting to generate
 	valid temporary addresses.
@@ -1025,13 +1037,15 @@ regen_max_retry - INTEGER
 
 max_addresses - INTEGER
 	Number of maximum addresses per interface.  0 disables limitation.
-	It is recommended not set too large value (or 0) because it would 
-	be too easy way to crash kernel to allow to create too much of 
+	It is recommended not set too large value (or 0) because it would
+	be too easy way to crash kernel to allow to create too much of
 	autoconfigured addresses.
 	Default: 16
 
 disable_ipv6 - BOOLEAN
-	Disable IPv6 operation.
+	Disable IPv6 operation.  If accept_dad is set to 2, this value
+	will be dynamically set to TRUE if DAD fails for the link-local
+	address.
 	Default: FALSE (enable IPv6 operation)
 
 accept_dad - INTEGER
diff --git a/Documentation/networking/ipv6.txt b/Documentation/networking/ipv6.txt
new file mode 100644
index 00000000000..268e5c103dd
--- /dev/null
+++ b/Documentation/networking/ipv6.txt
@@ -0,0 +1,35 @@
+
+Options for the ipv6 module are supplied as parameters at load time.
+
+Module options may be given as command line arguments to the insmod
+or modprobe command, but are usually specified in either the
+/etc/modules.conf or /etc/modprobe.conf configuration file, or in a
+distro-specific configuration file.
+
+The available ipv6 module parameters are listed below.  If a parameter
+is not specified the default value is used.
+
+The parameters are as follows:
+
+disable
+
+	Specifies whether to load the IPv6 module, but disable all
+	its functionality.  This might be used when another module
+	has a dependency on the IPv6 module being loaded, but no
+	IPv6 addresses or operations are desired.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 is enabled.
+
+		This is the default value.
+
+	1
+		IPv6 is disabled.
+
+		No IPv6 addresses will be added to interfaces, and
+		it will not be possible to open an IPv6 socket.
+
+		A reboot is required to enable IPv6.
+
diff --git a/Documentation/networking/ixgbe.txt b/Documentation/networking/ixgbe.txt
new file mode 100644
index 00000000000..eeb68685c78
--- /dev/null
+++ b/Documentation/networking/ixgbe.txt
@@ -0,0 +1,199 @@
+Linux Base Driver for 10 Gigabit PCI Express Intel(R) Network Connection
+========================================================================
+
+March 10, 2009
+
+
+Contents
+========
+
+- In This Release
+- Identifying Your Adapter
+- Building and Installation
+- Additional Configurations
+- Support
+
+
+
+In This Release
+===============
+
+This file describes the ixgbe Linux Base Driver for the 10 Gigabit PCI
+Express Intel(R) Network Connection.  This driver includes support for
+Itanium(R)2-based systems.
+
+For questions related to hardware requirements, refer to the documentation
+supplied with your 10 Gigabit adapter.  All hardware requirements listed apply
+to use with Linux.
+
+The following features are available in this kernel:
+ - Native VLANs
+ - Channel Bonding (teaming)
+ - SNMP
+ - Generic Receive Offload
+ - Data Center Bridging
+
+Channel Bonding documentation can be found in the Linux kernel source:
+/Documentation/networking/bonding.txt
+
+Ethtool, lspci, and ifconfig can be used to display device and driver
+specific information.
+
+
+Identifying Your Adapter
+========================
+
+This driver supports devices based on the 82598 controller and the 82599
+controller.
+
+For specific information on identifying which adapter you have, please visit:
+
+    http://support.intel.com/support/network/sb/CS-008441.htm
+
+
+Building and Installation
+=========================
+
+select m for "Intel(R) 10GbE PCI Express adapters support" located at:
+      Location:
+        -> Device Drivers
+          -> Network device support (NETDEVICES [=y])
+            -> Ethernet (10000 Mbit) (NETDEV_10000 [=y])
+
+1. make modules & make modules_install
+
+2. Load the module:
+
+# modprobe ixgbe
+
+   The insmod command can be used if the full
+   path to the driver module is specified.  For example:
+
+     insmod /lib/modules/<KERNEL VERSION>/kernel/drivers/net/ixgbe/ixgbe.ko
+
+   With 2.6 based kernels also make sure that older ixgbe drivers are
+   removed from the kernel, before loading the new module:
+
+     rmmod ixgbe; modprobe ixgbe
+
+3. Assign an IP address to the interface by entering the following, where
+   x is the interface number:
+
+     ifconfig ethx <IP_address>
+
+4. Verify that the interface works. Enter the following, where <IP_address>
+   is the IP address for another machine on the same subnet as the interface
+   that is being tested:
+
+     ping  <IP_address>
+
+
+Additional Configurations
+=========================
+
+  Viewing Link Messages
+  ---------------------
+  Link messages will not be displayed to the console if the distribution is
+  restricting system messages. In order to see network driver link messages on
+  your console, set dmesg to eight by entering the following:
+
+       dmesg -n 8
+
+  NOTE: This setting is not saved across reboots.
+
+
+  Jumbo Frames
+  ------------
+  The driver supports Jumbo Frames for all adapters. Jumbo Frames support is
+  enabled by changing the MTU to a value larger than the default of 1500.
+  The maximum value for the MTU is 16110.  Use the ifconfig command to
+  increase the MTU size.  For example:
+
+        ifconfig ethx mtu 9000 up
+
+  The maximum MTU setting for Jumbo Frames is 16110.  This value coincides
+  with the maximum Jumbo Frames size of 16128.
+
+  Generic Receive Offload, aka GRO
+  --------------------------------
+  The driver supports the in-kernel software implementation of GRO.  GRO has
+  shown that by coalescing Rx traffic into larger chunks of data, CPU
+  utilization can be significantly reduced when under large Rx load.  GRO is an
+  evolution of the previously-used LRO interface.  GRO is able to coalesce
+  other protocols besides TCP.  It's also safe to use with configurations that
+  are problematic for LRO, namely bridging and iSCSI.
+
+  GRO is enabled by default in the driver.  Future versions of ethtool will
+  support disabling and re-enabling GRO on the fly.
+
+
+  Data Center Bridging, aka DCB
+  -----------------------------
+
+  DCB is a configuration Quality of Service implementation in hardware.
+  It uses the VLAN priority tag (802.1p) to filter traffic.  That means
+  that there are 8 different priorities that traffic can be filtered into.
+  It also enables priority flow control which can limit or eliminate the
+  number of dropped packets during network stress.  Bandwidth can be
+  allocated to each of these priorities, which is enforced at the hardware
+  level.
+
+  To enable DCB support in ixgbe, you must enable the DCB netlink layer to
+  allow the userspace tools (see below) to communicate with the driver.
+  This can be found in the kernel configuration here:
+
+        -> Networking support
+          -> Networking options
+            -> Data Center Bridging support
+
+  Once this is selected, DCB support must be selected for ixgbe.  This can
+  be found here:
+
+        -> Device Drivers
+          -> Network device support (NETDEVICES [=y])
+            -> Ethernet (10000 Mbit) (NETDEV_10000 [=y])
+              -> Intel(R) 10GbE PCI Express adapters support
+                -> Data Center Bridging (DCB) Support
+
+  After these options are selected, you must rebuild your kernel and your
+  modules.
+
+  In order to use DCB, userspace tools must be downloaded and installed.
+  The dcbd tools can be found at:
+
+        http://e1000.sf.net
+
+
+  Ethtool
+  -------
+  The driver utilizes the ethtool interface for driver configuration and
+  diagnostics, as well as displaying statistical information.  Ethtool
+  version 3.0 or later is required for this functionality.
+
+  The latest release of ethtool can be found from
+  http://sourceforge.net/projects/gkernel.
+
+
+  NAPI
+  ----
+
+  NAPI (Rx polling mode) is supported in the ixgbe driver.  NAPI is enabled
+  by default in the driver.
+
+  See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
+
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+    http://support.intel.com
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+    http://e1000.sourceforge.net
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/rds.txt b/Documentation/networking/rds.txt
new file mode 100644
index 00000000000..c67077cbeb8
--- /dev/null
+++ b/Documentation/networking/rds.txt
@@ -0,0 +1,356 @@
+
+Overview
+========
+
+This readme tries to provide some background on the hows and whys of RDS,
+and will hopefully help you find your way around the code.
+
+In addition, please see this email about RDS origins:
+http://oss.oracle.com/pipermail/rds-devel/2007-November/000228.html
+
+RDS Architecture
+================
+
+RDS provides reliable, ordered datagram delivery by using a single
+reliable connection between any two nodes in the cluster. This allows
+applications to use a single socket to talk to any other process in the
+cluster - so in a cluster with N processes you need N sockets, in contrast
+to N*N if you use a connection-oriented socket transport like TCP.
+
+RDS is not Infiniband-specific; it was designed to support different
+transports.  The current implementation used to support RDS over TCP as well
+as IB. Work is in progress to support RDS over iWARP, and using DCE to
+guarantee no dropped packets on Ethernet, it may be possible to use RDS over
+UDP in the future.
+
+The high-level semantics of RDS from the application's point of view are
+
+ *	Addressing
+        RDS uses IPv4 addresses and 16bit port numbers to identify
+        the end point of a connection. All socket operations that involve
+        passing addresses between kernel and user space generally
+        use a struct sockaddr_in.
+
+        The fact that IPv4 addresses are used does not mean the underlying
+        transport has to be IP-based. In fact, RDS over IB uses a
+        reliable IB connection; the IP address is used exclusively to
+        locate the remote node's GID (by ARPing for the given IP).
+
+        The port space is entirely independent of UDP, TCP or any other
+        protocol.
+
+ *	Socket interface
+        RDS sockets work *mostly* as you would expect from a BSD
+        socket. The next section will cover the details. At any rate,
+        all I/O is performed through the standard BSD socket API.
+        Some additions like zerocopy support are implemented through
+        control messages, while other extensions use the getsockopt/
+        setsockopt calls.
+
+        Sockets must be bound before you can send or receive data.
+        This is needed because binding also selects a transport and
+        attaches it to the socket. Once bound, the transport assignment
+        does not change. RDS will tolerate IPs moving around (eg in
+        a active-active HA scenario), but only as long as the address
+        doesn't move to a different transport.
+
+ *	sysctls
+        RDS supports a number of sysctls in /proc/sys/net/rds
+
+
+Socket Interface
+================
+
+  AF_RDS, PF_RDS, SOL_RDS
+        These constants haven't been assigned yet, because RDS isn't in
+        mainline yet. Currently, the kernel module assigns some constant
+        and publishes it to user space through two sysctl files
+                /proc/sys/net/rds/pf_rds
+                /proc/sys/net/rds/sol_rds
+
+  fd = socket(PF_RDS, SOCK_SEQPACKET, 0);
+        This creates a new, unbound RDS socket.
+
+  setsockopt(SOL_SOCKET): send and receive buffer size
+        RDS honors the send and receive buffer size socket options.
+        You are not allowed to queue more than SO_SNDSIZE bytes to
+        a socket. A message is queued when sendmsg is called, and
+        it leaves the queue when the remote system acknowledges
+        its arrival.
+
+        The SO_RCVSIZE option controls the maximum receive queue length.
+        This is a soft limit rather than a hard limit - RDS will
+        continue to accept and queue incoming messages, even if that
+        takes the queue length over the limit. However, it will also
+        mark the port as "congested" and send a congestion update to
+        the source node. The source node is supposed to throttle any
+        processes sending to this congested port.
+
+  bind(fd, &sockaddr_in, ...)
+        This binds the socket to a local IP address and port, and a
+        transport.
+
+  sendmsg(fd, ...)
+        Sends a message to the indicated recipient. The kernel will
+        transparently establish the underlying reliable connection
+        if it isn't up yet.
+
+        An attempt to send a message that exceeds SO_SNDSIZE will
+        return with -EMSGSIZE
+
+        An attempt to send a message that would take the total number
+        of queued bytes over the SO_SNDSIZE threshold will return
+        EAGAIN.
+
+        An attempt to send a message to a destination that is marked
+        as "congested" will return ENOBUFS.
+
+  recvmsg(fd, ...)
+        Receives a message that was queued to this socket. The sockets
+        recv queue accounting is adjusted, and if the queue length
+        drops below SO_SNDSIZE, the port is marked uncongested, and
+        a congestion update is sent to all peers.
+
+        Applications can ask the RDS kernel module to receive
+        notifications via control messages (for instance, there is a
+        notification when a congestion update arrived, or when a RDMA
+        operation completes). These notifications are received through
+        the msg.msg_control buffer of struct msghdr. The format of the
+        messages is described in manpages.
+
+  poll(fd)
+        RDS supports the poll interface to allow the application
+        to implement async I/O.
+
+        POLLIN handling is pretty straightforward. When there's an
+        incoming message queued to the socket, or a pending notification,
+        we signal POLLIN.
+
+        POLLOUT is a little harder. Since you can essentially send
+        to any destination, RDS will always signal POLLOUT as long as
+        there's room on the send queue (ie the number of bytes queued
+        is less than the sendbuf size).
+
+        However, the kernel will refuse to accept messages to
+        a destination marked congested - in this case you will loop
+        forever if you rely on poll to tell you what to do.
+        This isn't a trivial problem, but applications can deal with
+        this - by using congestion notifications, and by checking for
+        ENOBUFS errors returned by sendmsg.
+
+  setsockopt(SOL_RDS, RDS_CANCEL_SENT_TO, &sockaddr_in)
+        This allows the application to discard all messages queued to a
+        specific destination on this particular socket.
+
+        This allows the application to cancel outstanding messages if
+        it detects a timeout. For instance, if it tried to send a message,
+        and the remote host is unreachable, RDS will keep trying forever.
+        The application may decide it's not worth it, and cancel the
+        operation. In this case, it would use RDS_CANCEL_SENT_TO to
+        nuke any pending messages.
+
+
+RDMA for RDS
+============
+
+  see rds-rdma(7) manpage (available in rds-tools)
+
+
+Congestion Notifications
+========================
+
+  see rds(7) manpage
+
+
+RDS Protocol
+============
+
+  Message header
+
+    The message header is a 'struct rds_header' (see rds.h):
+    Fields:
+      h_sequence:
+          per-packet sequence number
+      h_ack:
+          piggybacked acknowledgment of last packet received
+      h_len:
+          length of data, not including header
+      h_sport:
+          source port
+      h_dport:
+          destination port
+      h_flags:
+          CONG_BITMAP - this is a congestion update bitmap
+          ACK_REQUIRED - receiver must ack this packet
+          RETRANSMITTED - packet has previously been sent
+      h_credit:
+          indicate to other end of connection that
+          it has more credits available (i.e. there is
+          more send room)
+      h_padding[4]:
+          unused, for future use
+      h_csum:
+          header checksum
+      h_exthdr:
+          optional data can be passed here. This is currently used for
+          passing RDMA-related information.
+
+  ACK and retransmit handling
+
+      One might think that with reliable IB connections you wouldn't need
+      to ack messages that have been received.  The problem is that IB
+      hardware generates an ack message before it has DMAed the message
+      into memory.  This creates a potential message loss if the HCA is
+      disabled for any reason between when it sends the ack and before
+      the message is DMAed and processed.  This is only a potential issue
+      if another HCA is available for fail-over.
+
+      Sending an ack immediately would allow the sender to free the sent
+      message from their send queue quickly, but could cause excessive
+      traffic to be used for acks. RDS piggybacks acks on sent data
+      packets.  Ack-only packets are reduced by only allowing one to be
+      in flight at a time, and by the sender only asking for acks when
+      its send buffers start to fill up. All retransmissions are also
+      acked.
+
+  Flow Control
+
+      RDS's IB transport uses a credit-based mechanism to verify that
+      there is space in the peer's receive buffers for more data. This
+      eliminates the need for hardware retries on the connection.
+
+  Congestion
+
+      Messages waiting in the receive queue on the receiving socket
+      are accounted against the sockets SO_RCVBUF option value.  Only
+      the payload bytes in the message are accounted for.  If the
+      number of bytes queued equals or exceeds rcvbuf then the socket
+      is congested.  All sends attempted to this socket's address
+      should return block or return -EWOULDBLOCK.
+
+      Applications are expected to be reasonably tuned such that this
+      situation very rarely occurs.  An application encountering this
+      "back-pressure" is considered a bug.
+
+      This is implemented by having each node maintain bitmaps which
+      indicate which ports on bound addresses are congested.  As the
+      bitmap changes it is sent through all the connections which
+      terminate in the local address of the bitmap which changed.
+
+      The bitmaps are allocated as connections are brought up.  This
+      avoids allocation in the interrupt handling path which queues
+      sages on sockets.  The dense bitmaps let transports send the
+      entire bitmap on any bitmap change reasonably efficiently.  This
+      is much easier to implement than some finer-grained
+      communication of per-port congestion.  The sender does a very
+      inexpensive bit test to test if the port it's about to send to
+      is congested or not.
+
+
+RDS Transport Layer
+==================
+
+  As mentioned above, RDS is not IB-specific. Its code is divided
+  into a general RDS layer and a transport layer.
+
+  The general layer handles the socket API, congestion handling,
+  loopback, stats, usermem pinning, and the connection state machine.
+
+  The transport layer handles the details of the transport. The IB
+  transport, for example, handles all the queue pairs, work requests,
+  CM event handlers, and other Infiniband details.
+
+
+RDS Kernel Structures
+=====================
+
+  struct rds_message
+    aka possibly "rds_outgoing", the generic RDS layer copies data to
+    be sent and sets header fields as needed, based on the socket API.
+    This is then queued for the individual connection and sent by the
+    connection's transport.
+  struct rds_incoming
+    a generic struct referring to incoming data that can be handed from
+    the transport to the general code and queued by the general code
+    while the socket is awoken. It is then passed back to the transport
+    code to handle the actual copy-to-user.
+  struct rds_socket
+    per-socket information
+  struct rds_connection
+    per-connection information
+  struct rds_transport
+    pointers to transport-specific functions
+  struct rds_statistics
+    non-transport-specific statistics
+  struct rds_cong_map
+    wraps the raw congestion bitmap, contains rbnode, waitq, etc.
+
+Connection management
+=====================
+
+  Connections may be in UP, DOWN, CONNECTING, DISCONNECTING, and
+  ERROR states.
+
+  The first time an attempt is made by an RDS socket to send data to
+  a node, a connection is allocated and connected. That connection is
+  then maintained forever -- if there are transport errors, the
+  connection will be dropped and re-established.
+
+  Dropping a connection while packets are queued will cause queued or
+  partially-sent datagrams to be retransmitted when the connection is
+  re-established.
+
+
+The send path
+=============
+
+  rds_sendmsg()
+    struct rds_message built from incoming data
+    CMSGs parsed (e.g. RDMA ops)
+    transport connection alloced and connected if not already
+    rds_message placed on send queue
+    send worker awoken
+  rds_send_worker()
+    calls rds_send_xmit() until queue is empty
+  rds_send_xmit()
+    transmits congestion map if one is pending
+    may set ACK_REQUIRED
+    calls transport to send either non-RDMA or RDMA message
+    (RDMA ops never retransmitted)
+  rds_ib_xmit()
+    allocs work requests from send ring
+    adds any new send credits available to peer (h_credits)
+    maps the rds_message's sg list
+    piggybacks ack
+    populates work requests
+    post send to connection's queue pair
+
+The recv path
+=============
+
+  rds_ib_recv_cq_comp_handler()
+    looks at write completions
+    unmaps recv buffer from device
+    no errors, call rds_ib_process_recv()
+    refill recv ring
+  rds_ib_process_recv()
+    validate header checksum
+    copy header to rds_ib_incoming struct if start of a new datagram
+    add to ibinc's fraglist
+    if competed datagram:
+      update cong map if datagram was cong update
+      call rds_recv_incoming() otherwise
+      note if ack is required
+  rds_recv_incoming()
+    drop duplicate packets
+    respond to pings
+    find the sock associated with this datagram
+    add to sock queue
+    wake up sock
+    do some congestion calculations
+  rds_recvmsg
+    copy data into user iovec
+    handle CMSGs
+    return to application
+
+
diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt
new file mode 100644
index 00000000000..0e58b453917
--- /dev/null
+++ b/Documentation/networking/timestamping.txt
@@ -0,0 +1,180 @@
+The existing interfaces for getting network packages time stamped are:
+
+* SO_TIMESTAMP
+  Generate time stamp for each incoming packet using the (not necessarily
+  monotonous!) system time. Result is returned via recv_msg() in a
+  control message as timeval (usec resolution).
+
+* SO_TIMESTAMPNS
+  Same time stamping mechanism as SO_TIMESTAMP, but returns result as
+  timespec (nsec resolution).
+
+* IP_MULTICAST_LOOP + SO_TIMESTAMP[NS]
+  Only for multicasts: approximate send time stamp by receiving the looped
+  packet and using its receive time stamp.
+
+The following interface complements the existing ones: receive time
+stamps can be generated and returned for arbitrary packets and much
+closer to the point where the packet is really sent. Time stamps can
+be generated in software (as before) or in hardware (if the hardware
+has such a feature).
+
+SO_TIMESTAMPING:
+
+Instructs the socket layer which kind of information is wanted. The
+parameter is an integer with some of the following bits set. Setting
+other bits is an error and doesn't change the current state.
+
+SOF_TIMESTAMPING_TX_HARDWARE:  try to obtain send time stamp in hardware
+SOF_TIMESTAMPING_TX_SOFTWARE:  if SOF_TIMESTAMPING_TX_HARDWARE is off or
+                               fails, then do it in software
+SOF_TIMESTAMPING_RX_HARDWARE:  return the original, unmodified time stamp
+                               as generated by the hardware
+SOF_TIMESTAMPING_RX_SOFTWARE:  if SOF_TIMESTAMPING_RX_HARDWARE is off or
+                               fails, then do it in software
+SOF_TIMESTAMPING_RAW_HARDWARE: return original raw hardware time stamp
+SOF_TIMESTAMPING_SYS_HARDWARE: return hardware time stamp transformed to
+                               the system time base
+SOF_TIMESTAMPING_SOFTWARE:     return system time stamp generated in
+                               software
+
+SOF_TIMESTAMPING_TX/RX determine how time stamps are generated.
+SOF_TIMESTAMPING_RAW/SYS determine how they are reported in the
+following control message:
+    struct scm_timestamping {
+           struct timespec systime;
+           struct timespec hwtimetrans;
+           struct timespec hwtimeraw;
+    };
+
+recvmsg() can be used to get this control message for regular incoming
+packets. For send time stamps the outgoing packet is looped back to
+the socket's error queue with the send time stamp(s) attached. It can
+be received with recvmsg(flags=MSG_ERRQUEUE). The call returns the
+original outgoing packet data including all headers preprended down to
+and including the link layer, the scm_timestamping control message and
+a sock_extended_err control message with ee_errno==ENOMSG and
+ee_origin==SO_EE_ORIGIN_TIMESTAMPING. A socket with such a pending
+bounced packet is ready for reading as far as select() is concerned.
+If the outgoing packet has to be fragmented, then only the first
+fragment is time stamped and returned to the sending socket.
+
+All three values correspond to the same event in time, but were
+generated in different ways. Each of these values may be empty (= all
+zero), in which case no such value was available. If the application
+is not interested in some of these values, they can be left blank to
+avoid the potential overhead of calculating them.
+
+systime is the value of the system time at that moment. This
+corresponds to the value also returned via SO_TIMESTAMP[NS]. If the
+time stamp was generated by hardware, then this field is
+empty. Otherwise it is filled in if SOF_TIMESTAMPING_SOFTWARE is
+set.
+
+hwtimeraw is the original hardware time stamp. Filled in if
+SOF_TIMESTAMPING_RAW_HARDWARE is set. No assumptions about its
+relation to system time should be made.
+
+hwtimetrans is the hardware time stamp transformed so that it
+corresponds as good as possible to system time. This correlation is
+not perfect; as a consequence, sorting packets received via different
+NICs by their hwtimetrans may differ from the order in which they were
+received. hwtimetrans may be non-monotonic even for the same NIC.
+Filled in if SOF_TIMESTAMPING_SYS_HARDWARE is set. Requires support
+by the network device and will be empty without that support.
+
+
+SIOCSHWTSTAMP:
+
+Hardware time stamping must also be initialized for each device driver
+that is expected to do hardware time stamping. The parameter is:
+
+struct hwtstamp_config {
+    int flags;           /* no flags defined right now, must be zero */
+    int tx_type;         /* HWTSTAMP_TX_* */
+    int rx_filter;       /* HWTSTAMP_FILTER_* */
+};
+
+Desired behavior is passed into the kernel and to a specific device by
+calling ioctl(SIOCSHWTSTAMP) with a pointer to a struct ifreq whose
+ifr_data points to a struct hwtstamp_config. The tx_type and
+rx_filter are hints to the driver what it is expected to do. If
+the requested fine-grained filtering for incoming packets is not
+supported, the driver may time stamp more than just the requested types
+of packets.
+
+A driver which supports hardware time stamping shall update the struct
+with the actual, possibly more permissive configuration. If the
+requested packets cannot be time stamped, then nothing should be
+changed and ERANGE shall be returned (in contrast to EINVAL, which
+indicates that SIOCSHWTSTAMP is not supported at all).
+
+Only a processes with admin rights may change the configuration. User
+space is responsible to ensure that multiple processes don't interfere
+with each other and that the settings are reset.
+
+/* possible values for hwtstamp_config->tx_type */
+enum {
+	/*
+	 * no outgoing packet will need hardware time stamping;
+	 * should a packet arrive which asks for it, no hardware
+	 * time stamping will be done
+	 */
+	HWTSTAMP_TX_OFF,
+
+	/*
+	 * enables hardware time stamping for outgoing packets;
+	 * the sender of the packet decides which are to be
+	 * time stamped by setting SOF_TIMESTAMPING_TX_SOFTWARE
+	 * before sending the packet
+	 */
+	HWTSTAMP_TX_ON,
+};
+
+/* possible values for hwtstamp_config->rx_filter */
+enum {
+	/* time stamp no incoming packet at all */
+	HWTSTAMP_FILTER_NONE,
+
+	/* time stamp any incoming packet */
+	HWTSTAMP_FILTER_ALL,
+
+        /* return value: time stamp all packets requested plus some others */
+        HWTSTAMP_FILTER_SOME,
+
+	/* PTP v1, UDP, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V1_L4_EVENT,
+
+        ...
+};
+
+
+DEVICE IMPLEMENTATION
+
+A driver which supports hardware time stamping must support the
+SIOCSHWTSTAMP ioctl. Time stamps for received packets must be stored
+in the skb with skb_hwtstamp_set().
+
+Time stamps for outgoing packets are to be generated as follows:
+- In hard_start_xmit(), check if skb_hwtstamp_check_tx_hardware()
+  returns non-zero. If yes, then the driver is expected
+  to do hardware time stamping.
+- If this is possible for the skb and requested, then declare
+  that the driver is doing the time stamping by calling
+  skb_hwtstamp_tx_in_progress(). A driver not supporting
+  hardware time stamping doesn't do that. A driver must never
+  touch sk_buff::tstamp! It is used to store how time stamping
+  for an outgoing packets is to be done.
+- As soon as the driver has sent the packet and/or obtained a
+  hardware time stamp for it, it passes the time stamp back by
+  calling skb_hwtstamp_tx() with the original skb, the raw
+  hardware time stamp and a handle to the device (necessary
+  to convert the hardware time stamp to system time). If obtaining
+  the hardware time stamp somehow fails, then the driver should
+  not fall back to software time stamping. The rationale is that
+  this would occur at a later time in the processing pipeline
+  than other software time stamping and therefore could lead
+  to unexpected deltas between time stamps.
+- If the driver did not call skb_hwtstamp_tx_in_progress(), then
+  dev_hard_start_xmit() checks whether software time stamping
+  is wanted as fallback and potentially generates the time stamp.
diff --git a/Documentation/networking/timestamping/.gitignore b/Documentation/networking/timestamping/.gitignore
new file mode 100644
index 00000000000..71e81eb2e22
--- /dev/null
+++ b/Documentation/networking/timestamping/.gitignore
@@ -0,0 +1 @@
+timestamping
diff --git a/Documentation/networking/timestamping/Makefile b/Documentation/networking/timestamping/Makefile
new file mode 100644
index 00000000000..2a1489fdc03
--- /dev/null
+++ b/Documentation/networking/timestamping/Makefile
@@ -0,0 +1,6 @@
+CPPFLAGS = -I../../../include
+
+timestamping: timestamping.c
+
+clean:
+	rm -f timestamping
diff --git a/Documentation/networking/timestamping/timestamping.c b/Documentation/networking/timestamping/timestamping.c
new file mode 100644
index 00000000000..43d14310421
--- /dev/null
+++ b/Documentation/networking/timestamping/timestamping.c
@@ -0,0 +1,533 @@
+/*
+ * This program demonstrates how the various time stamping features in
+ * the Linux kernel work. It emulates the behavior of a PTP
+ * implementation in stand-alone master mode by sending PTPv1 Sync
+ * multicasts once every second. It looks for similar packets, but
+ * beyond that doesn't actually implement PTP.
+ *
+ * Outgoing packets are time stamped with SO_TIMESTAMPING with or
+ * without hardware support.
+ *
+ * Incoming packets are time stamped with SO_TIMESTAMPING with or
+ * without hardware support, SIOCGSTAMP[NS] (per-socket time stamp) and
+ * SO_TIMESTAMP[NS].
+ *
+ * Copyright (C) 2009 Intel Corporation.
+ * Author: Patrick Ohly <patrick.ohly@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+
+#include <sys/time.h>
+#include <sys/socket.h>
+#include <sys/select.h>
+#include <sys/ioctl.h>
+#include <arpa/inet.h>
+#include <net/if.h>
+
+#include "asm/types.h"
+#include "linux/net_tstamp.h"
+#include "linux/errqueue.h"
+
+#ifndef SO_TIMESTAMPING
+# define SO_TIMESTAMPING         37
+# define SCM_TIMESTAMPING        SO_TIMESTAMPING
+#endif
+
+#ifndef SO_TIMESTAMPNS
+# define SO_TIMESTAMPNS 35
+#endif
+
+#ifndef SIOCGSTAMPNS
+# define SIOCGSTAMPNS 0x8907
+#endif
+
+#ifndef SIOCSHWTSTAMP
+# define SIOCSHWTSTAMP 0x89b0
+#endif
+
+static void usage(const char *error)
+{
+	if (error)
+		printf("invalid option: %s\n", error);
+	printf("timestamping interface option*\n\n"
+	       "Options:\n"
+	       "  IP_MULTICAST_LOOP - looping outgoing multicasts\n"
+	       "  SO_TIMESTAMP - normal software time stamping, ms resolution\n"
+	       "  SO_TIMESTAMPNS - more accurate software time stamping\n"
+	       "  SOF_TIMESTAMPING_TX_HARDWARE - hardware time stamping of outgoing packets\n"
+	       "  SOF_TIMESTAMPING_TX_SOFTWARE - software fallback for outgoing packets\n"
+	       "  SOF_TIMESTAMPING_RX_HARDWARE - hardware time stamping of incoming packets\n"
+	       "  SOF_TIMESTAMPING_RX_SOFTWARE - software fallback for incoming packets\n"
+	       "  SOF_TIMESTAMPING_SOFTWARE - request reporting of software time stamps\n"
+	       "  SOF_TIMESTAMPING_SYS_HARDWARE - request reporting of transformed HW time stamps\n"
+	       "  SOF_TIMESTAMPING_RAW_HARDWARE - request reporting of raw HW time stamps\n"
+	       "  SIOCGSTAMP - check last socket time stamp\n"
+	       "  SIOCGSTAMPNS - more accurate socket time stamp\n");
+	exit(1);
+}
+
+static void bail(const char *error)
+{
+	printf("%s: %s\n", error, strerror(errno));
+	exit(1);
+}
+
+static const unsigned char sync[] = {
+	0x00, 0x01, 0x00, 0x01,
+	0x5f, 0x44, 0x46, 0x4c,
+	0x54, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+	0x01, 0x01,
+
+	/* fake uuid */
+	0x00, 0x01,
+	0x02, 0x03, 0x04, 0x05,
+
+	0x00, 0x01, 0x00, 0x37,
+	0x00, 0x00, 0x00, 0x08,
+	0x00, 0x00, 0x00, 0x00,
+	0x49, 0x05, 0xcd, 0x01,
+	0x29, 0xb1, 0x8d, 0xb0,
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x01,
+
+	/* fake uuid */
+	0x00, 0x01,
+	0x02, 0x03, 0x04, 0x05,
+
+	0x00, 0x00, 0x00, 0x37,
+	0x00, 0x00, 0x00, 0x04,
+	0x44, 0x46, 0x4c, 0x54,
+	0x00, 0x00, 0xf0, 0x60,
+	0x00, 0x01, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x01,
+	0x00, 0x00, 0xf0, 0x60,
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x04,
+	0x44, 0x46, 0x4c, 0x54,
+	0x00, 0x01,
+
+	/* fake uuid */
+	0x00, 0x01,
+	0x02, 0x03, 0x04, 0x05,
+
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00
+};
+
+static void sendpacket(int sock, struct sockaddr *addr, socklen_t addr_len)
+{
+	struct timeval now;
+	int res;
+
+	res = sendto(sock, sync, sizeof(sync), 0,
+		addr, addr_len);
+	gettimeofday(&now, 0);
+	if (res < 0)
+		printf("%s: %s\n", "send", strerror(errno));
+	else
+		printf("%ld.%06ld: sent %d bytes\n",
+		       (long)now.tv_sec, (long)now.tv_usec,
+		       res);
+}
+
+static void printpacket(struct msghdr *msg, int res,
+			char *data,
+			int sock, int recvmsg_flags,
+			int siocgstamp, int siocgstampns)
+{
+	struct sockaddr_in *from_addr = (struct sockaddr_in *)msg->msg_name;
+	struct cmsghdr *cmsg;
+	struct timeval tv;
+	struct timespec ts;
+	struct timeval now;
+
+	gettimeofday(&now, 0);
+
+	printf("%ld.%06ld: received %s data, %d bytes from %s, %d bytes control messages\n",
+	       (long)now.tv_sec, (long)now.tv_usec,
+	       (recvmsg_flags & MSG_ERRQUEUE) ? "error" : "regular",
+	       res,
+	       inet_ntoa(from_addr->sin_addr),
+	       msg->msg_controllen);
+	for (cmsg = CMSG_FIRSTHDR(msg);
+	     cmsg;
+	     cmsg = CMSG_NXTHDR(msg, cmsg)) {
+		printf("   cmsg len %d: ", cmsg->cmsg_len);
+		switch (cmsg->cmsg_level) {
+		case SOL_SOCKET:
+			printf("SOL_SOCKET ");
+			switch (cmsg->cmsg_type) {
+			case SO_TIMESTAMP: {
+				struct timeval *stamp =
+					(struct timeval *)CMSG_DATA(cmsg);
+				printf("SO_TIMESTAMP %ld.%06ld",
+				       (long)stamp->tv_sec,
+				       (long)stamp->tv_usec);
+				break;
+			}
+			case SO_TIMESTAMPNS: {
+				struct timespec *stamp =
+					(struct timespec *)CMSG_DATA(cmsg);
+				printf("SO_TIMESTAMPNS %ld.%09ld",
+				       (long)stamp->tv_sec,
+				       (long)stamp->tv_nsec);
+				break;
+			}
+			case SO_TIMESTAMPING: {
+				struct timespec *stamp =
+					(struct timespec *)CMSG_DATA(cmsg);
+				printf("SO_TIMESTAMPING ");
+				printf("SW %ld.%09ld ",
+				       (long)stamp->tv_sec,
+				       (long)stamp->tv_nsec);
+				stamp++;
+				printf("HW transformed %ld.%09ld ",
+				       (long)stamp->tv_sec,
+				       (long)stamp->tv_nsec);
+				stamp++;
+				printf("HW raw %ld.%09ld",
+				       (long)stamp->tv_sec,
+				       (long)stamp->tv_nsec);
+				break;
+			}
+			default:
+				printf("type %d", cmsg->cmsg_type);
+				break;
+			}
+			break;
+		case IPPROTO_IP:
+			printf("IPPROTO_IP ");
+			switch (cmsg->cmsg_type) {
+			case IP_RECVERR: {
+				struct sock_extended_err *err =
+					(struct sock_extended_err *)CMSG_DATA(cmsg);
+				printf("IP_RECVERR ee_errno '%s' ee_origin %d => %s",
+					strerror(err->ee_errno),
+					err->ee_origin,
+#ifdef SO_EE_ORIGIN_TIMESTAMPING
+					err->ee_origin == SO_EE_ORIGIN_TIMESTAMPING ?
+					"bounced packet" : "unexpected origin"
+#else
+					"probably SO_EE_ORIGIN_TIMESTAMPING"
+#endif
+					);
+				if (res < sizeof(sync))
+					printf(" => truncated data?!");
+				else if (!memcmp(sync, data + res - sizeof(sync),
+							sizeof(sync)))
+					printf(" => GOT OUR DATA BACK (HURRAY!)");
+				break;
+			}
+			case IP_PKTINFO: {
+				struct in_pktinfo *pktinfo =
+					(struct in_pktinfo *)CMSG_DATA(cmsg);
+				printf("IP_PKTINFO interface index %u",
+					pktinfo->ipi_ifindex);
+				break;
+			}
+			default:
+				printf("type %d", cmsg->cmsg_type);
+				break;
+			}
+			break;
+		default:
+			printf("level %d type %d",
+				cmsg->cmsg_level,
+				cmsg->cmsg_type);
+			break;
+		}
+		printf("\n");
+	}
+
+	if (siocgstamp) {
+		if (ioctl(sock, SIOCGSTAMP, &tv))
+			printf("   %s: %s\n", "SIOCGSTAMP", strerror(errno));
+		else
+			printf("SIOCGSTAMP %ld.%06ld\n",
+			       (long)tv.tv_sec,
+			       (long)tv.tv_usec);
+	}
+	if (siocgstampns) {
+		if (ioctl(sock, SIOCGSTAMPNS, &ts))
+			printf("   %s: %s\n", "SIOCGSTAMPNS", strerror(errno));
+		else
+			printf("SIOCGSTAMPNS %ld.%09ld\n",
+			       (long)ts.tv_sec,
+			       (long)ts.tv_nsec);
+	}
+}
+
+static void recvpacket(int sock, int recvmsg_flags,
+		       int siocgstamp, int siocgstampns)
+{
+	char data[256];
+	struct msghdr msg;
+	struct iovec entry;
+	struct sockaddr_in from_addr;
+	struct {
+		struct cmsghdr cm;
+		char control[512];
+	} control;
+	int res;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.msg_iov = &entry;
+	msg.msg_iovlen = 1;
+	entry.iov_base = data;
+	entry.iov_len = sizeof(data);
+	msg.msg_name = (caddr_t)&from_addr;
+	msg.msg_namelen = sizeof(from_addr);
+	msg.msg_control = &control;
+	msg.msg_controllen = sizeof(control);
+
+	res = recvmsg(sock, &msg, recvmsg_flags|MSG_DONTWAIT);
+	if (res < 0) {
+		printf("%s %s: %s\n",
+		       "recvmsg",
+		       (recvmsg_flags & MSG_ERRQUEUE) ? "error" : "regular",
+		       strerror(errno));
+	} else {
+		printpacket(&msg, res, data,
+			    sock, recvmsg_flags,
+			    siocgstamp, siocgstampns);
+	}
+}
+
+int main(int argc, char **argv)
+{
+	int so_timestamping_flags = 0;
+	int so_timestamp = 0;
+	int so_timestampns = 0;
+	int siocgstamp = 0;
+	int siocgstampns = 0;
+	int ip_multicast_loop = 0;
+	char *interface;
+	int i;
+	int enabled = 1;
+	int sock;
+	struct ifreq device;
+	struct ifreq hwtstamp;
+	struct hwtstamp_config hwconfig, hwconfig_requested;
+	struct sockaddr_in addr;
+	struct ip_mreq imr;
+	struct in_addr iaddr;
+	int val;
+	socklen_t len;
+	struct timeval next;
+
+	if (argc < 2)
+		usage(0);
+	interface = argv[1];
+
+	for (i = 2; i < argc; i++) {
+		if (!strcasecmp(argv[i], "SO_TIMESTAMP"))
+			so_timestamp = 1;
+		else if (!strcasecmp(argv[i], "SO_TIMESTAMPNS"))
+			so_timestampns = 1;
+		else if (!strcasecmp(argv[i], "SIOCGSTAMP"))
+			siocgstamp = 1;
+		else if (!strcasecmp(argv[i], "SIOCGSTAMPNS"))
+			siocgstampns = 1;
+		else if (!strcasecmp(argv[i], "IP_MULTICAST_LOOP"))
+			ip_multicast_loop = 1;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_TX_HARDWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_TX_HARDWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_TX_SOFTWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_TX_SOFTWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_RX_HARDWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_RX_HARDWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_RX_SOFTWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_RX_SOFTWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_SOFTWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_SOFTWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_SYS_HARDWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_SYS_HARDWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_RAW_HARDWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_RAW_HARDWARE;
+		else
+			usage(argv[i]);
+	}
+
+	sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP);
+	if (socket < 0)
+		bail("socket");
+
+	memset(&device, 0, sizeof(device));
+	strncpy(device.ifr_name, interface, sizeof(device.ifr_name));
+	if (ioctl(sock, SIOCGIFADDR, &device) < 0)
+		bail("getting interface IP address");
+
+	memset(&hwtstamp, 0, sizeof(hwtstamp));
+	strncpy(hwtstamp.ifr_name, interface, sizeof(hwtstamp.ifr_name));
+	hwtstamp.ifr_data = (void *)&hwconfig;
+	memset(&hwconfig, 0, sizeof(&hwconfig));
+	hwconfig.tx_type =
+		(so_timestamping_flags & SOF_TIMESTAMPING_TX_HARDWARE) ?
+		HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF;
+	hwconfig.rx_filter =
+		(so_timestamping_flags & SOF_TIMESTAMPING_RX_HARDWARE) ?
+		HWTSTAMP_FILTER_PTP_V1_L4_SYNC : HWTSTAMP_FILTER_NONE;
+	hwconfig_requested = hwconfig;
+	if (ioctl(sock, SIOCSHWTSTAMP, &hwtstamp) < 0) {
+		if ((errno == EINVAL || errno == ENOTSUP) &&
+		    hwconfig_requested.tx_type == HWTSTAMP_TX_OFF &&
+		    hwconfig_requested.rx_filter == HWTSTAMP_FILTER_NONE)
+			printf("SIOCSHWTSTAMP: disabling hardware time stamping not possible\n");
+		else
+			bail("SIOCSHWTSTAMP");
+	}
+	printf("SIOCSHWTSTAMP: tx_type %d requested, got %d; rx_filter %d requested, got %d\n",
+	       hwconfig_requested.tx_type, hwconfig.tx_type,
+	       hwconfig_requested.rx_filter, hwconfig.rx_filter);
+
+	/* bind to PTP port */
+	addr.sin_family = AF_INET;
+	addr.sin_addr.s_addr = htonl(INADDR_ANY);
+	addr.sin_port = htons(319 /* PTP event port */);
+	if (bind(sock,
+		 (struct sockaddr *)&addr,
+		 sizeof(struct sockaddr_in)) < 0)
+		bail("bind");
+
+	/* set multicast group for outgoing packets */
+	inet_aton("224.0.1.130", &iaddr); /* alternate PTP domain 1 */
+	addr.sin_addr = iaddr;
+	imr.imr_multiaddr.s_addr = iaddr.s_addr;
+	imr.imr_interface.s_addr =
+		((struct sockaddr_in *)&device.ifr_addr)->sin_addr.s_addr;
+	if (setsockopt(sock, IPPROTO_IP, IP_MULTICAST_IF,
+		       &imr.imr_interface.s_addr, sizeof(struct in_addr)) < 0)
+		bail("set multicast");
+
+	/* join multicast group, loop our own packet */
+	if (setsockopt(sock, IPPROTO_IP, IP_ADD_MEMBERSHIP,
+		       &imr, sizeof(struct ip_mreq)) < 0)
+		bail("join multicast group");
+
+	if (setsockopt(sock, IPPROTO_IP, IP_MULTICAST_LOOP,
+		       &ip_multicast_loop, sizeof(enabled)) < 0) {
+		bail("loop multicast");
+	}
+
+	/* set socket options for time stamping */
+	if (so_timestamp &&
+		setsockopt(sock, SOL_SOCKET, SO_TIMESTAMP,
+			   &enabled, sizeof(enabled)) < 0)
+		bail("setsockopt SO_TIMESTAMP");
+
+	if (so_timestampns &&
+		setsockopt(sock, SOL_SOCKET, SO_TIMESTAMPNS,
+			   &enabled, sizeof(enabled)) < 0)
+		bail("setsockopt SO_TIMESTAMPNS");
+
+	if (so_timestamping_flags &&
+		setsockopt(sock, SOL_SOCKET, SO_TIMESTAMPING,
+			   &so_timestamping_flags,
+			   sizeof(so_timestamping_flags)) < 0)
+		bail("setsockopt SO_TIMESTAMPING");
+
+	/* request IP_PKTINFO for debugging purposes */
+	if (setsockopt(sock, SOL_IP, IP_PKTINFO,
+		       &enabled, sizeof(enabled)) < 0)
+		printf("%s: %s\n", "setsockopt IP_PKTINFO", strerror(errno));
+
+	/* verify socket options */
+	len = sizeof(val);
+	if (getsockopt(sock, SOL_SOCKET, SO_TIMESTAMP, &val, &len) < 0)
+		printf("%s: %s\n", "getsockopt SO_TIMESTAMP", strerror(errno));
+	else
+		printf("SO_TIMESTAMP %d\n", val);
+
+	if (getsockopt(sock, SOL_SOCKET, SO_TIMESTAMPNS, &val, &len) < 0)
+		printf("%s: %s\n", "getsockopt SO_TIMESTAMPNS",
+		       strerror(errno));
+	else
+		printf("SO_TIMESTAMPNS %d\n", val);
+
+	if (getsockopt(sock, SOL_SOCKET, SO_TIMESTAMPING, &val, &len) < 0) {
+		printf("%s: %s\n", "getsockopt SO_TIMESTAMPING",
+		       strerror(errno));
+	} else {
+		printf("SO_TIMESTAMPING %d\n", val);
+		if (val != so_timestamping_flags)
+			printf("   not the expected value %d\n",
+			       so_timestamping_flags);
+	}
+
+	/* send packets forever every five seconds */
+	gettimeofday(&next, 0);
+	next.tv_sec = (next.tv_sec + 1) / 5 * 5;
+	next.tv_usec = 0;
+	while (1) {
+		struct timeval now;
+		struct timeval delta;
+		long delta_us;
+		int res;
+		fd_set readfs, errorfs;
+
+		gettimeofday(&now, 0);
+		delta_us = (long)(next.tv_sec - now.tv_sec) * 1000000 +
+			(long)(next.tv_usec - now.tv_usec);
+		if (delta_us > 0) {
+			/* continue waiting for timeout or data */
+			delta.tv_sec = delta_us / 1000000;
+			delta.tv_usec = delta_us % 1000000;
+
+			FD_ZERO(&readfs);
+			FD_ZERO(&errorfs);
+			FD_SET(sock, &readfs);
+			FD_SET(sock, &errorfs);
+			printf("%ld.%06ld: select %ldus\n",
+			       (long)now.tv_sec, (long)now.tv_usec,
+			       delta_us);
+			res = select(sock + 1, &readfs, 0, &errorfs, &delta);
+			gettimeofday(&now, 0);
+			printf("%ld.%06ld: select returned: %d, %s\n",
+			       (long)now.tv_sec, (long)now.tv_usec,
+			       res,
+			       res < 0 ? strerror(errno) : "success");
+			if (res > 0) {
+				if (FD_ISSET(sock, &readfs))
+					printf("ready for reading\n");
+				if (FD_ISSET(sock, &errorfs))
+					printf("has error\n");
+				recvpacket(sock, 0,
+					   siocgstamp,
+					   siocgstampns);
+				recvpacket(sock, MSG_ERRQUEUE,
+					   siocgstamp,
+					   siocgstampns);
+			}
+		} else {
+			/* write one packet */
+			sendpacket(sock,
+				   (struct sockaddr *)&addr,
+				   sizeof(addr));
+			next.tv_sec += 5;
+			continue;
+		}
+	}
+
+	return 0;
+}
diff --git a/Documentation/networking/vxge.txt b/Documentation/networking/vxge.txt
new file mode 100644
index 00000000000..d2e2997e6fa
--- /dev/null
+++ b/Documentation/networking/vxge.txt
@@ -0,0 +1,100 @@
+Neterion's (Formerly S2io) X3100 Series 10GbE PCIe Server Adapter Linux driver
+==============================================================================
+
+Contents
+--------
+
+1) Introduction
+2) Features supported
+3) Configurable driver parameters
+4) Troubleshooting
+
+1) Introduction:
+----------------
+This Linux driver supports all Neterion's X3100 series 10 GbE PCIe I/O
+Virtualized Server adapters.
+The X3100 series supports four modes of operation, configurable via
+firmware -
+	Single function mode
+	Multi function mode
+	SRIOV mode
+	MRIOV mode
+The functions share a 10GbE link and the pci-e bus, but hardly anything else
+inside the ASIC. Features like independent hw reset, statistics, bandwidth/
+priority allocation and guarantees, GRO, TSO, interrupt moderation etc are
+supported independently on each function.
+
+(See below for a complete list of features supported for both IPv4 and IPv6)
+
+2) Features supported:
+----------------------
+
+i)   Single function mode (up to 17 queues)
+
+ii)  Multi function mode (up to 17 functions)
+
+iii) PCI-SIG's I/O Virtualization
+       - Single Root mode: v1.0 (up to 17 functions)
+       - Multi-Root mode: v1.0 (up to 17 functions)
+
+iv)  Jumbo frames
+       X3100 Series supports MTU up to 9600 bytes, modifiable using
+       ifconfig command.
+
+v)   Offloads supported: (Enabled by default)
+       Checksum offload (TCP/UDP/IP) on transmit and receive paths
+       TCP Segmentation Offload (TSO) on transmit path
+       Generic Receive Offload (GRO) on receive path
+
+vi)  MSI-X: (Enabled by default)
+       Resulting in noticeable performance improvement (up to 7% on certain
+       platforms).
+
+vii) NAPI: (Enabled by default)
+       For better Rx interrupt moderation.
+
+viii)RTH (Receive Traffic Hash): (Enabled by default)
+       Receive side steering for better scaling.
+
+ix)  Statistics
+       Comprehensive MAC-level and software statistics displayed using
+       "ethtool -S" option.
+
+x)   Multiple hardware queues: (Enabled by default)
+       Up to 17 hardware based transmit and receive data channels, with
+       multiple steering options (transmit multiqueue enabled by default).
+
+3) Configurable driver parameters:
+----------------------------------
+
+i)  max_config_dev
+       Specifies maximum device functions to be enabled.
+       Valid range: 1-8
+
+ii) max_config_port
+       Specifies number of ports to be enabled.
+       Valid range: 1,2
+       Default: 1
+
+iii)max_config_vpath
+       Specifies maximum VPATH(s) configured for each device function.
+       Valid range: 1-17
+
+iv) vlan_tag_strip
+       Enables/disables vlan tag stripping from all received tagged frames that
+       are not replicated at the internal L2 switch.
+       Valid range: 0,1 (disabled, enabled respectively)
+       Default: 1
+
+v)  addr_learn_en
+       Enable learning the mac address of the guest OS interface in
+       virtualization environment.
+       Valid range: 0,1 (disabled, enabled respectively)
+       Default: 0
+
+4) Troubleshooting:
+-------------------
+
+To resolve an issue with the source code or X3100 series adapter, please collect
+the statistics, register dumps using ethool, relevant logs and email them to
+support@neterion.com.
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt
index 6c238f59b2a..249db3a15d1 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt
@@ -1,6 +1,6 @@
 * Uploaded QE firmware
 
-      If a new firwmare has been uploaded to the QE (usually by the
+      If a new firmware has been uploaded to the QE (usually by the
       boot loader), then a 'firmware' child node should be added to the QE
       node.  This node provides information on the uploaded firmware that
       device drivers may need.
diff --git a/Documentation/powerpc/dts-bindings/fsl/dma.txt b/Documentation/powerpc/dts-bindings/fsl/dma.txt
index cc453110fc4..0732cdd05ba 100644
--- a/Documentation/powerpc/dts-bindings/fsl/dma.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/dma.txt
@@ -35,30 +35,30 @@ Example:
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
-		reg = <82a8 4>;
-		ranges = <0 8100 1a4>;
+		reg = <0x82a8 4>;
+		ranges = <0 0x8100 0x1a4>;
 		interrupt-parent = <&ipic>;
-		interrupts = <47 8>;
+		interrupts = <71 8>;
 		cell-index = <0>;
 		dma-channel@0 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <0>;
-			reg = <0 80>;
+			reg = <0 0x80>;
 		};
 		dma-channel@80 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <1>;
-			reg = <80 80>;
+			reg = <0x80 0x80>;
 		};
 		dma-channel@100 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <2>;
-			reg = <100 80>;
+			reg = <0x100 0x80>;
 		};
 		dma-channel@180 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <3>;
-			reg = <180 80>;
+			reg = <0x180 0x80>;
 		};
 	};
 
@@ -93,36 +93,36 @@ Example:
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
-		reg = <21300 4>;
-		ranges = <0 21100 200>;
+		reg = <0x21300 4>;
+		ranges = <0 0x21100 0x200>;
 		cell-index = <0>;
 		dma-channel@0 {
 			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
-			reg = <0 80>;
+			reg = <0 0x80>;
 			cell-index = <0>;
 			interrupt-parent = <&mpic>;
-			interrupts = <14 2>;
+			interrupts = <20 2>;
 		};
 		dma-channel@80 {
 			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
-			reg = <80 80>;
+			reg = <0x80 0x80>;
 			cell-index = <1>;
 			interrupt-parent = <&mpic>;
-			interrupts = <15 2>;
+			interrupts = <21 2>;
 		};
 		dma-channel@100 {
 			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
-			reg = <100 80>;
+			reg = <0x100 0x80>;
 			cell-index = <2>;
 			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
+			interrupts = <22 2>;
 		};
 		dma-channel@180 {
 			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
-			reg = <180 80>;
+			reg = <0x180 0x80>;
 			cell-index = <3>;
 			interrupt-parent = <&mpic>;
-			interrupts = <17 2>;
+			interrupts = <23 2>;
 		};
 	};
 
diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
new file mode 100644
index 00000000000..60084655776
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
@@ -0,0 +1,24 @@
+* Freescale Enhanced Secure Digital Host Controller (eSDHC)
+
+The Enhanced Secure Digital Host Controller provides an interface
+for MMC, SD, and SDIO types of memory cards.
+
+Required properties:
+  - compatible : should be
+    "fsl,<chip>-esdhc", "fsl,mpc8379-esdhc" for MPC83xx processors.
+    "fsl,<chip>-esdhc", "fsl,mpc8536-esdhc" for MPC85xx processors.
+  - reg : should contain eSDHC registers location and length.
+  - interrupts : should contain eSDHC interrupt.
+  - interrupt-parent : interrupt source phandle.
+  - clock-frequency : specifies eSDHC base clock frequency.
+
+Example:
+
+sdhci@2e000 {
+	compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+	reg = <0x2e000 0x1000>;
+	interrupts = <42 0x8>;
+	interrupt-parent = <&ipic>;
+	/* Filled in by U-Boot */
+	clock-frequency = <0>;
+};
diff --git a/Documentation/powerpc/dts-bindings/fsl/ssi.txt b/Documentation/powerpc/dts-bindings/fsl/ssi.txt
index a2d963998a6..5ff76c9c57d 100644
--- a/Documentation/powerpc/dts-bindings/fsl/ssi.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/ssi.txt
@@ -4,44 +4,56 @@ The SSI is a serial device that communicates with audio codecs.  It can
 be programmed in AC97, I2S, left-justified, or right-justified modes.
 
 Required properties:
-- compatible	  : compatible list, containing "fsl,ssi"
-- cell-index	  : the SSI, <0> = SSI1, <1> = SSI2, and so on
-- reg		  : offset and length of the register set for the device
-- interrupts	  : <a b> where a is the interrupt number and b is a
-                     field that represents an encoding of the sense and
-		    level information for the interrupt.  This should be
-		    encoded based on the information in section 2)
-		    depending on the type of interrupt controller you
-		    have.
-- interrupt-parent : the phandle for the interrupt controller that
-                     services interrupts for this device.
-- fsl,mode	  : the operating mode for the SSI interface
-		    "i2s-slave" - I2S mode, SSI is clock slave
-		    "i2s-master" - I2S mode, SSI is clock master
-		    "lj-slave" - left-justified mode, SSI is clock slave
-		    "lj-master" - l.j. mode, SSI is clock master
-		    "rj-slave" - right-justified mode, SSI is clock slave
-		    "rj-master" - r.j., SSI is clock master
-		    "ac97-slave" - AC97 mode, SSI is clock slave
-		    "ac97-master" - AC97 mode, SSI is clock master
-- fsl,playback-dma: phandle to a node for the DMA channel to use for
+- compatible:       Compatible list, contains "fsl,ssi".
+- cell-index:       The SSI, <0> = SSI1, <1> = SSI2, and so on.
+- reg:              Offset and length of the register set for the device.
+- interrupts:       <a b> where a is the interrupt number and b is a
+                    field that represents an encoding of the sense and
+                    level information for the interrupt.  This should be
+                    encoded based on the information in section 2)
+                    depending on the type of interrupt controller you
+                    have.
+- interrupt-parent: The phandle for the interrupt controller that
+                    services interrupts for this device.
+- fsl,mode:         The operating mode for the SSI interface.
+                    "i2s-slave" - I2S mode, SSI is clock slave
+                    "i2s-master" - I2S mode, SSI is clock master
+                    "lj-slave" - left-justified mode, SSI is clock slave
+                    "lj-master" - l.j. mode, SSI is clock master
+                    "rj-slave" - right-justified mode, SSI is clock slave
+                    "rj-master" - r.j., SSI is clock master
+                    "ac97-slave" - AC97 mode, SSI is clock slave
+                    "ac97-master" - AC97 mode, SSI is clock master
+- fsl,playback-dma: Phandle to a node for the DMA channel to use for
                     playback of audio.  This is typically dictated by SOC
                     design.  See the notes below.
-- fsl,capture-dma:  phandle to a node for the DMA channel to use for
+- fsl,capture-dma:  Phandle to a node for the DMA channel to use for
                     capture (recording) of audio.  This is typically dictated
                     by SOC design.  See the notes below.
+- fsl,fifo-depth:   The number of elements in the transmit and receive FIFOs.
+                    This number is the maximum allowed value for SFCSR[TFWM0].
+- fsl,ssi-asynchronous:
+                    If specified, the SSI is to be programmed in asynchronous
+                    mode.  In this mode, pins SRCK, STCK, SRFS, and STFS must
+                    all be connected to valid signals.  In synchronous mode,
+                    SRCK and SRFS are ignored.  Asynchronous mode allows
+                    playback and capture to use different sample sizes and
+                    sample rates.  Some drivers may require that SRCK and STCK
+                    be connected together, and SRFS and STFS be connected
+                    together.  This would still allow different sample sizes,
+                    but not different sample rates.
 
 Optional properties:
-- codec-handle	  : phandle to a 'codec' node that defines an audio
-		    codec connected to this SSI.  This node is typically
-		    a child of an I2C or other control node.
+- codec-handle:     Phandle to a 'codec' node that defines an audio
+                    codec connected to this SSI.  This node is typically
+                    a child of an I2C or other control node.
 
 Child 'codec' node required properties:
-- compatible	  : compatible list, contains the name of the codec
+- compatible:       Compatible list, contains the name of the codec
 
 Child 'codec' node optional properties:
-- clock-frequency  : The frequency of the input clock, which typically
-                     comes from an on-board dedicated oscillator.
+- clock-frequency:  The frequency of the input clock, which typically comes
+                    from an on-board dedicated oscillator.
 
 Notes on fsl,playback-dma and fsl,capture-dma:
 
diff --git a/Documentation/powerpc/dts-bindings/fsl/tsec.txt b/Documentation/powerpc/dts-bindings/fsl/tsec.txt
index 7fa4b27574b..edb7ae19e86 100644
--- a/Documentation/powerpc/dts-bindings/fsl/tsec.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/tsec.txt
@@ -56,6 +56,12 @@ Properties:
     hardware.
   - fsl,magic-packet : If present, indicates that the hardware supports
     waking up via magic packet.
+  - bd-stash : If present, indicates that the hardware supports stashing
+    buffer descriptors in the L2.
+  - rx-stash-len : Denotes the number of bytes of a received buffer to stash
+    in the L2.
+  - rx-stash-idx : Denotes the index of the first byte from the received
+    buffer to stash in the L2.
 
 Example:
 	ethernet@24000 {
diff --git a/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt b/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt
index 84a04d5eb8e..a48b2cadc7f 100644
--- a/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt
@@ -5,9 +5,21 @@ Required properties:
 - reg : should specify localbus chip select and size used for the chip.
 - fsl,upm-addr-offset : UPM pattern offset for the address latch.
 - fsl,upm-cmd-offset : UPM pattern offset for the command latch.
-- gpios : may specify optional GPIO connected to the Ready-Not-Busy pin.
 
-Example:
+Optional properties:
+- fsl,upm-wait-flags : add chip-dependent short delays after running the
+	UPM pattern (0x1), after writing a data byte (0x2) or after
+	writing out a buffer (0x4).
+- fsl,upm-addr-line-cs-offsets : address offsets for multi-chip support.
+	The corresponding address lines are used to select the chip.
+- gpios : may specify optional GPIOs connected to the Ready-Not-Busy pins
+	(R/B#). For multi-chip devices, "n" GPIO definitions are required
+	according to the number of chips.
+- chip-delay : chip dependent delay for transfering data from array to
+	read registers (tR). Required if property "gpios" is not used
+	(R/B# pins not connected).
+
+Examples:
 
 upm@1,0 {
 	compatible = "fsl,upm-nand";
@@ -26,3 +38,26 @@ upm@1,0 {
 		};
 	};
 };
+
+upm@3,0 {
+	#address-cells = <0>;
+	#size-cells = <0>;
+	compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand";
+	reg = <3 0x0 0x800>;
+	fsl,upm-addr-offset = <0x10>;
+	fsl,upm-cmd-offset = <0x08>;
+	/* Multi-chip NAND device */
+	fsl,upm-addr-line-cs-offsets = <0x0 0x200>;
+	fsl,upm-wait-flags = <0x5>;
+	chip-delay = <25>; // in micro-seconds
+
+	nand@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			    label = "fs";
+			    reg = <0x00000000 0x10000000>;
+		};
+	};
+};
diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt b/Documentation/powerpc/dts-bindings/gpio/led.txt
index ff51f4c0fa9..4fe14deedc0 100644
--- a/Documentation/powerpc/dts-bindings/gpio/led.txt
+++ b/Documentation/powerpc/dts-bindings/gpio/led.txt
@@ -1,15 +1,43 @@
-LED connected to GPIO
+LEDs connected to GPIO lines
 
 Required properties:
-- compatible : should be "gpio-led".
-- label : (optional) the label for this LED. If omitted, the label is
+- compatible : should be "gpio-leds".
+
+Each LED is represented as a sub-node of the gpio-leds device.  Each
+node's name represents the name of the corresponding LED.
+
+LED sub-node properties:
+- gpios :  Should specify the LED's GPIO, see "Specifying GPIO information
+  for devices" in Documentation/powerpc/booting-without-of.txt.  Active
+  low LEDs should be indicated using flags in the GPIO specifier.
+- label :  (optional) The label for this LED.  If omitted, the label is
   taken from the node name (excluding the unit address).
-- gpios : should specify LED GPIO.
+- linux,default-trigger :  (optional) This parameter, if present, is a
+  string defining the trigger assigned to the LED.  Current triggers are:
+    "backlight" - LED will act as a back-light, controlled by the framebuffer
+		  system
+    "default-on" - LED will turn on
+    "heartbeat" - LED "double" flashes at a load average based rate
+    "ide-disk" - LED indicates disk activity
+    "timer" - LED flashes at a fixed, configurable rate
 
-Example:
+Examples:
 
-led@0 {
-	compatible = "gpio-led";
-	label = "hdd";
-	gpios = <&mcu_pio 0 1>;
+leds {
+	compatible = "gpio-leds";
+	hdd {
+		label = "IDE Activity";
+		gpios = <&mcu_pio 0 1>; /* Active low */
+		linux,default-trigger = "ide-disk";
+	};
 };
+
+run-control {
+	compatible = "gpio-leds";
+	red {
+		gpios = <&mpc8572 6 0>;
+	};
+	green {
+		gpios = <&mpc8572 7 0>;
+	};
+}
diff --git a/Documentation/powerpc/dts-bindings/mmc-spi-slot.txt b/Documentation/powerpc/dts-bindings/mmc-spi-slot.txt
new file mode 100644
index 00000000000..c39ac289195
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/mmc-spi-slot.txt
@@ -0,0 +1,23 @@
+MMC/SD/SDIO slot directly connected to a SPI bus
+
+Required properties:
+- compatible : should be "mmc-spi-slot".
+- reg : should specify SPI address (chip-select number).
+- spi-max-frequency : maximum frequency for this device (Hz).
+- voltage-ranges : two cells are required, first cell specifies minimum
+  slot voltage (mV), second cell specifies maximum slot voltage (mV).
+  Several ranges could be specified.
+- gpios : (optional) may specify GPIOs in this order: Card-Detect GPIO,
+  Write-Protect GPIO.
+
+Example:
+
+	mmc-slot@0 {
+		compatible = "fsl,mpc8323rdb-mmc-slot",
+			     "mmc-spi-slot";
+		reg = <0>;
+		gpios = <&qe_pio_d 14 1
+			 &qe_pio_d 15 0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <50000000>;
+	};
diff --git a/Documentation/scheduler/00-INDEX b/Documentation/scheduler/00-INDEX
index aabcc3a089b..3c00c9c3219 100644
--- a/Documentation/scheduler/00-INDEX
+++ b/Documentation/scheduler/00-INDEX
@@ -2,8 +2,6 @@
 	- this file.
 sched-arch.txt
 	- CPU Scheduler implementation hints for architecture specific code.
-sched-coding.txt
-	- reference for various scheduler-related methods in the O(1) scheduler.
 sched-design-CFS.txt
 	- goals, design and implementation of the Complete Fair Scheduler.
 sched-domains.txt
diff --git a/Documentation/scheduler/sched-coding.txt b/Documentation/scheduler/sched-coding.txt
deleted file mode 100644
index cbd8db752ac..00000000000
--- a/Documentation/scheduler/sched-coding.txt
+++ /dev/null
@@ -1,126 +0,0 @@
-     Reference for various scheduler-related methods in the O(1) scheduler
-		Robert Love <rml@tech9.net>, MontaVista Software
-
-
-Note most of these methods are local to kernel/sched.c - this is by design.
-The scheduler is meant to be self-contained and abstracted away.  This document
-is primarily for understanding the scheduler, not interfacing to it.  Some of
-the discussed interfaces, however, are general process/scheduling methods.
-They are typically defined in include/linux/sched.h.
-
-
-Main Scheduling Methods
------------------------
-
-void load_balance(runqueue_t *this_rq, int idle)
-	Attempts to pull tasks from one cpu to another to balance cpu usage,
-	if needed.  This method is called explicitly if the runqueues are
-	imbalanced or periodically by the timer tick.  Prior to calling,
-	the current runqueue must be locked and interrupts disabled.
-
-void schedule()
-	The main scheduling function.  Upon return, the highest priority
-	process will be active.
-
-
-Locking
--------
-
-Each runqueue has its own lock, rq->lock.  When multiple runqueues need
-to be locked, lock acquires must be ordered by ascending &runqueue value.
-
-A specific runqueue is locked via
-
-	task_rq_lock(task_t pid, unsigned long *flags)
-
-which disables preemption, disables interrupts, and locks the runqueue pid is
-running on.  Likewise,
-
-	task_rq_unlock(task_t pid, unsigned long *flags)
-
-unlocks the runqueue pid is running on, restores interrupts to their previous
-state, and reenables preemption.
-
-The routines
-
-	double_rq_lock(runqueue_t *rq1, runqueue_t *rq2)
-
-and
-
-	double_rq_unlock(runqueue_t *rq1, runqueue_t *rq2)
-
-safely lock and unlock, respectively, the two specified runqueues.  They do
-not, however, disable and restore interrupts.  Users are required to do so
-manually before and after calls.
-
-
-Values
-------
-
-MAX_PRIO
-	The maximum priority of the system, stored in the task as task->prio.
-	Lower priorities are higher.  Normal (non-RT) priorities range from
-	MAX_RT_PRIO to (MAX_PRIO - 1).
-MAX_RT_PRIO
-	The maximum real-time priority of the system.  Valid RT priorities
-	range from 0 to (MAX_RT_PRIO - 1).
-MAX_USER_RT_PRIO
-	The maximum real-time priority that is exported to user-space.  Should
-	always be equal to or less than MAX_RT_PRIO.  Setting it less allows
-	kernel threads to have higher priorities than any user-space task.
-MIN_TIMESLICE
-MAX_TIMESLICE
-	Respectively, the minimum and maximum timeslices (quanta) of a process.
-
-Data
-----
-
-struct runqueue
-	The main per-CPU runqueue data structure.
-struct task_struct
-	The main per-process data structure.
-
-
-General Methods
----------------
-
-cpu_rq(cpu)
-	Returns the runqueue of the specified cpu.
-this_rq()
-	Returns the runqueue of the current cpu.
-task_rq(pid)
-	Returns the runqueue which holds the specified pid.
-cpu_curr(cpu)
-	Returns the task currently running on the given cpu.
-rt_task(pid)
-	Returns true if pid is real-time, false if not.
-
-
-Process Control Methods
------------------------
-
-void set_user_nice(task_t *p, long nice)
-	Sets the "nice" value of task p to the given value.
-int setscheduler(pid_t pid, int policy, struct sched_param *param)
-	Sets the scheduling policy and parameters for the given pid.
-int set_cpus_allowed(task_t *p, unsigned long new_mask)
-	Sets a given task's CPU affinity and migrates it to a proper cpu.
-	Callers must have a valid reference to the task and assure the
-	task not exit prematurely.  No locks can be held during the call.
-set_task_state(tsk, state_value)
-	Sets the given task's state to the given value.
-set_current_state(state_value)
-	Sets the current task's state to the given value.
-void set_tsk_need_resched(struct task_struct *tsk)
-	Sets need_resched in the given task.
-void clear_tsk_need_resched(struct task_struct *tsk)
-	Clears need_resched in the given task.
-void set_need_resched()
-	Sets need_resched in the current task.
-void clear_need_resched()
-	Clears need_resched in the current task.
-int need_resched()
-	Returns true if need_resched is set in the current task, false
-	otherwise.
-yield()
-	Place the current process at the end of the runqueue and call schedule.
diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt
index 3ef339f491e..5ba4d3fc625 100644
--- a/Documentation/scheduler/sched-rt-group.txt
+++ b/Documentation/scheduler/sched-rt-group.txt
@@ -126,7 +126,7 @@ This uses the /cgroup virtual file system and "/cgroup/<cgroup>/cpu.rt_runtime_u
 to control the CPU time reserved for each control group instead.
 
 For more information on working with control groups, you should read
-Documentation/cgroups.txt as well.
+Documentation/cgroups/cgroups.txt as well.
 
 Group settings are checked against the following limits in order to keep the configuration
 schedulable:
diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt
index ddace3afc83..30f643f611b 100644
--- a/Documentation/scsi/aacraid.txt
+++ b/Documentation/scsi/aacraid.txt
@@ -60,17 +60,9 @@ Supported Cards/Chipsets
 	9005:0285:9005:02d5	Adaptec	ASR-2405 (Voodoo40 Lite)
 	9005:0285:9005:02d6	Adaptec	ASR-2445 (Voodoo44 Lite)
 	9005:0285:9005:02d7	Adaptec	ASR-2805 (Voodoo80 Lite)
-	9005:0285:9005:02d8	Adaptec	5405G (Voodoo40 PM)
-	9005:0285:9005:02d9	Adaptec	5445G (Voodoo44 PM)
-	9005:0285:9005:02da	Adaptec	5805G (Voodoo80 PM)
-	9005:0285:9005:02db	Adaptec	5085G (Voodoo08 PM)
-	9005:0285:9005:02dc	Adaptec	51245G (Voodoo124 PM)
-	9005:0285:9005:02dd	Adaptec	51645G (Voodoo164 PM)
-	9005:0285:9005:02de	Adaptec	52445G (Voodoo244 PM)
-	9005:0285:9005:02df	Adaptec	ASR-2045G (Voodoo04 Lite PM)
-	9005:0285:9005:02e0	Adaptec	ASR-2405G (Voodoo40 Lite PM)
-	9005:0285:9005:02e1	Adaptec	ASR-2445G (Voodoo44 Lite PM)
-	9005:0285:9005:02e2	Adaptec	ASR-2805G (Voodoo80 Lite PM)
+	9005:0285:9005:02d8	Adaptec	5405Z (Voodoo40 BLBU)
+	9005:0285:9005:02d9	Adaptec	5445Z (Voodoo44 BLBU)
+	9005:0285:9005:02da	Adaptec	5805Z (Voodoo80 BLBU)
 	1011:0046:9005:0364	Adaptec	5400S (Mustang)
 	1011:0046:9005:0365	Adaptec	5400S (Mustang)
 	9005:0287:9005:0800	Adaptec	Themisto (Jupiter)
@@ -140,6 +132,7 @@ Deanna Bonds                            (non-DASD support, PAE fibs and 64 bit,
 					 where fibs that go to the hardware are consistently called hw_fibs and
 					 not just fibs like the name of the driver tracking structure)
 Mark Salyzyn <Mark_Salyzyn@adaptec.com> Fixed panic issues and added some new product ids for upcoming hbas. Performance tuning, card failover and bug mitigations.
+Achim Leubner <Achim_Leubner@adaptec.com>
 
 Original Driver
 -------------------------
diff --git a/Documentation/scsi/cxgb3i.txt b/Documentation/scsi/cxgb3i.txt
index 8141fa01978..7ac8032ee9b 100644
--- a/Documentation/scsi/cxgb3i.txt
+++ b/Documentation/scsi/cxgb3i.txt
@@ -4,7 +4,7 @@ Introduction
 ============
 
 The Chelsio T3 ASIC based Adapters (S310, S320, S302, S304, Mezz cards, etc.
-series of products) supports iSCSI acceleration and iSCSI Direct Data Placement
+series of products) support iSCSI acceleration and iSCSI Direct Data Placement
 (DDP) where the hardware handles the expensive byte touching operations, such
 as CRC computation and verification, and direct DMA to the final host memory
 destination:
@@ -31,9 +31,9 @@ destination:
 	  the TCP segments onto the wire. It handles TCP retransmission if
 	  needed.
 
-	  On receving, S3 h/w recovers the iSCSI PDU by reassembling TCP
+	  On receiving, S3 h/w recovers the iSCSI PDU by reassembling TCP
 	  segments, separating the header and data, calculating and verifying
-	  the digests, then forwards the header to the host. The payload data,
+	  the digests, then forwarding the header to the host. The payload data,
 	  if possible, will be directly placed into the pre-posted host DDP
 	  buffer. Otherwise, the payload data will be sent to the host too.
 
@@ -68,9 +68,8 @@ The following steps need to be taken to accelerates the open-iscsi initiator:
 	sure the ip address is unique in the network.
 
 3. edit /etc/iscsi/iscsid.conf
-   The default setting for MaxRecvDataSegmentLength (131072) is too big,
-   replace "node.conn[0].iscsi.MaxRecvDataSegmentLength" to be a value no
-   bigger than 15360 (for example 8192):
+   The default setting for MaxRecvDataSegmentLength (131072) is too big;
+   replace with a value no bigger than 15360 (for example 8192):
 
 	node.conn[0].iscsi.MaxRecvDataSegmentLength = 8192
 
diff --git a/Documentation/scsi/osd.txt b/Documentation/scsi/osd.txt
new file mode 100644
index 00000000000..da162f7fd5f
--- /dev/null
+++ b/Documentation/scsi/osd.txt
@@ -0,0 +1,198 @@
+The OSD Standard
+================
+OSD (Object-Based Storage Device) is a T10 SCSI command set that is designed
+to provide efficient operation of input/output logical units that manage the
+allocation, placement, and accessing of variable-size data-storage containers,
+called objects. Objects are intended to contain operating system and application
+constructs. Each object has associated attributes attached to it, which are
+integral part of the object and provide metadata about the object. The standard
+defines some common obligatory attributes, but user attributes can be added as
+needed.
+
+See: http://www.t10.org/ftp/t10/drafts/osd2/ for the latest draft for OSD 2
+or search the web for "OSD SCSI"
+
+OSD in the Linux Kernel
+=======================
+osd-initiator:
+  The main component of OSD in Kernel is the osd-initiator library. Its main
+user is intended to be the pNFS-over-objects layout driver, which uses objects
+as its back-end data storage. Other clients are the other osd parts listed below.
+
+osd-uld:
+  This is a SCSI ULD that registers for OSD type devices and provides a testing
+platform, both for the in-kernel initiator as well as connected targets. It
+currently has no useful user-mode API, though it could have if need be.
+
+exofs:
+  Is an OSD based Linux file system. It uses the osd-initiator and osd-uld,
+to export a usable file system for users.
+See Documentation/filesystems/exofs.txt for more details
+
+osd target:
+  There are no current plans for an OSD target implementation in kernel. For all
+needs, a user-mode target that is based on the scsi tgt target framework is
+available from Ohio Supercomputer Center (OSC) at:
+http://www.open-osd.org/bin/view/Main/OscOsdProject
+There are several other target implementations. See http://open-osd.org for more
+links.
+
+Files and Folders
+=================
+This is the complete list of files included in this work:
+include/scsi/
+	osd_initiator.h   Main API for the initiator library
+	osd_types.h	  Common OSD types
+	osd_sec.h	  Security Manager API
+	osd_protocol.h	  Wire definitions of the OSD standard protocol
+	osd_attributes.h  Wire definitions of OSD attributes
+
+drivers/scsi/osd/
+	osd_initiator.c   OSD-Initiator library implementation
+	osd_uld.c	  The OSD scsi ULD
+	osd_ktest.{h,c}	  In-kernel test suite (called by osd_uld)
+	osd_debug.h	  Some printk macros
+	Makefile	  For both in-tree and out-of-tree compilation
+	Kconfig		  Enables inclusion of the different pieces
+	osd_test.c	  User-mode application to call the kernel tests
+
+The OSD-Initiator Library
+=========================
+osd_initiator is a low level implementation of an osd initiator encoder.
+But even though, it should be intuitive and easy to use. Perhaps over time an
+higher lever will form that automates some of the more common recipes.
+
+init/fini:
+- osd_dev_init() associates a scsi_device with an osd_dev structure
+  and initializes some global pools. This should be done once per scsi_device
+  (OSD LUN). The osd_dev structure is needed for calling osd_start_request().
+
+- osd_dev_fini() cleans up before a osd_dev/scsi_device destruction.
+
+OSD commands encoding, execution, and decoding of results:
+
+struct osd_request's is used to iteratively encode an OSD command and carry
+its state throughout execution. Each request goes through these stages:
+
+a. osd_start_request() allocates the request.
+
+b. Any of the osd_req_* methods is used to encode a request of the specified
+   type.
+
+c. osd_req_add_{get,set}_attr_* may be called to add get/set attributes to the
+   CDB. "List" or "Page" mode can be used exclusively. The attribute-list API
+   can be called multiple times on the same request. However, only one
+   attribute-page can be read, as mandated by the OSD standard.
+
+d. osd_finalize_request() computes offsets into the data-in and data-out buffers
+   and signs the request using the provided capability key and integrity-
+   check parameters.
+
+e. osd_execute_request() may be called to execute the request via the block
+   layer and wait for its completion.  The request can be executed
+   asynchronously by calling the block layer API directly.
+
+f. After execution, osd_req_decode_sense() can be called to decode the request's
+   sense information.
+
+g. osd_req_decode_get_attr() may be called to retrieve osd_add_get_attr_list()
+   values.
+
+h. osd_end_request() must be called to deallocate the request and any resource
+   associated with it. Note that osd_end_request cleans up the request at any
+   stage and it must always be called after a successful osd_start_request().
+
+osd_request's structure:
+
+The OSD standard defines a complex structure of IO segments pointed to by
+members in the CDB. Up to 3 segments can be deployed in the IN-Buffer and up to
+4 in the OUT-Buffer. The ASCII illustration below depicts a secure-read with
+associated get+set of attributes-lists. Other combinations very on the same
+basic theme. From no-segments-used up to all-segments-used.
+
+|________OSD-CDB__________|
+|                         |
+|read_len (offset=0)     -|---------\
+|                         |         |
+|get_attrs_list_length    |         |
+|get_attrs_list_offset   -|----\    |
+|                         |    |    |
+|retrieved_attrs_alloc_len|    |    |
+|retrieved_attrs_offset  -|----|----|-\
+|                         |    |    | |
+|set_attrs_list_length    |    |    | |
+|set_attrs_list_offset   -|-\  |    | |
+|                         | |  |    | |
+|in_data_integ_offset    -|-|--|----|-|-\
+|out_data_integ_offset   -|-|--|--\ | | |
+\_________________________/ |  |  | | | |
+                            |  |  | | | |
+|_______OUT-BUFFER________| |  |  | | | |
+|      Set attr list      |</  |  | | | |
+|                         |    |  | | | |
+|-------------------------|    |  | | | |
+|   Get attr descriptors  |<---/  | | | |
+|                         |       | | | |
+|-------------------------|       | | | |
+|    Out-data integrity   |<------/ | | |
+|                         |         | | |
+\_________________________/         | | |
+                                    | | |
+|________IN-BUFFER________|         | | |
+|      In-Data read       |<--------/ | |
+|                         |           | |
+|-------------------------|           | |
+|      Get attr list      |<----------/ |
+|                         |             |
+|-------------------------|             |
+|    In-data integrity    |<------------/
+|                         |
+\_________________________/
+
+A block device request can carry bidirectional payload by means of associating
+a bidi_read request with a main write-request. Each in/out request is described
+by a chain of BIOs associated with each request.
+The CDB is of a SCSI VARLEN CDB format, as described by OSD standard.
+The OSD standard also mandates alignment restrictions at start of each segment.
+
+In the code, in struct osd_request, there are two _osd_io_info structures to
+describe the IN/OUT buffers above, two BIOs for the data payload and up to five
+_osd_req_data_segment structures to hold the different segments allocation and
+information.
+
+Important: We have chosen to disregard the assumption that a BIO-chain (and
+the resulting sg-list) describes a linear memory buffer. Meaning only first and
+last scatter chain can be incomplete and all the middle chains are of PAGE_SIZE.
+For us, a scatter-gather-list, as its name implies and as used by the Networking
+layer, is to describe a vector of buffers that will be transferred to/from the
+wire. It works very well with current iSCSI transport. iSCSI is currently the
+only deployed OSD transport. In the future we anticipate SAS and FC attached OSD
+devices as well.
+
+The OSD Testing ULD
+===================
+TODO: More user-mode control on tests.
+
+Authors, Mailing list
+=====================
+Please communicate with us on any deployment of osd, whether using this code
+or not.
+
+Any problems, questions, bug reports, lonely OSD nights, please email:
+   OSD Dev List <osd-dev@open-osd.org>
+
+More up-to-date information can be found on:
+http://open-osd.org
+
+Boaz Harrosh <bharrosh@panasas.com>
+Benny Halevy <bhalevy@panasas.com>
+
+References
+==========
+Weber, R., "SCSI Object-Based Storage Device Commands",
+T10/1355-D ANSI/INCITS 400-2004,
+http://www.t10.org/ftp/t10/drafts/osd/osd-r10.pdf
+
+Weber, R., "SCSI Object-Based Storage Device Commands -2 (OSD-2)"
+T10/1729-D, Working Draft, rev. 3
+http://www.t10.org/ftp/t10/drafts/osd2/osd2r03.pdf
diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt
new file mode 100644
index 00000000000..ebc50f808ea
--- /dev/null
+++ b/Documentation/slow-work.txt
@@ -0,0 +1,174 @@
+		     ====================================
+		     SLOW WORK ITEM EXECUTION THREAD POOL
+		     ====================================
+
+By: David Howells <dhowells@redhat.com>
+
+The slow work item execution thread pool is a pool of threads for performing
+things that take a relatively long time, such as making mkdir calls.
+Typically, when processing something, these items will spend a lot of time
+blocking a thread on I/O, thus making that thread unavailable for doing other
+work.
+
+The standard workqueue model is unsuitable for this class of work item as that
+limits the owner to a single thread or a single thread per CPU.  For some
+tasks, however, more threads - or fewer - are required.
+
+There is just one pool per system.  It contains no threads unless something
+wants to use it - and that something must register its interest first.  When
+the pool is active, the number of threads it contains is dynamic, varying
+between a maximum and minimum setting, depending on the load.
+
+
+====================
+CLASSES OF WORK ITEM
+====================
+
+This pool support two classes of work items:
+
+ (*) Slow work items.
+
+ (*) Very slow work items.
+
+The former are expected to finish much quicker than the latter.
+
+An operation of the very slow class may do a batch combination of several
+lookups, mkdirs, and a create for instance.
+
+An operation of the ordinarily slow class may, for example, write stuff or
+expand files, provided the time taken to do so isn't too long.
+
+Operations of both types may sleep during execution, thus tying up the thread
+loaned to it.
+
+
+THREAD-TO-CLASS ALLOCATION
+--------------------------
+
+Not all the threads in the pool are available to work on very slow work items.
+The number will be between one and one fewer than the number of active threads.
+This is configurable (see the "Pool Configuration" section).
+
+All the threads are available to work on ordinarily slow work items, but a
+percentage of the threads will prefer to work on very slow work items.
+
+The configuration ensures that at least one thread will be available to work on
+very slow work items, and at least one thread will be available that won't work
+on very slow work items at all.
+
+
+=====================
+USING SLOW WORK ITEMS
+=====================
+
+Firstly, a module or subsystem wanting to make use of slow work items must
+register its interest:
+
+	 int ret = slow_work_register_user();
+
+This will return 0 if successful, or a -ve error upon failure.
+
+
+Slow work items may then be set up by:
+
+ (1) Declaring a slow_work struct type variable:
+
+	#include <linux/slow-work.h>
+
+	struct slow_work myitem;
+
+ (2) Declaring the operations to be used for this item:
+
+	struct slow_work_ops myitem_ops = {
+		.get_ref = myitem_get_ref,
+		.put_ref = myitem_put_ref,
+		.execute = myitem_execute,
+	};
+
+     [*] For a description of the ops, see section "Item Operations".
+
+ (3) Initialising the item:
+
+	slow_work_init(&myitem, &myitem_ops);
+
+     or:
+
+	vslow_work_init(&myitem, &myitem_ops);
+
+     depending on its class.
+
+A suitably set up work item can then be enqueued for processing:
+
+	int ret = slow_work_enqueue(&myitem);
+
+This will return a -ve error if the thread pool is unable to gain a reference
+on the item, 0 otherwise.
+
+
+The items are reference counted, so there ought to be no need for a flush
+operation.  When all a module's slow work items have been processed, and the
+module has no further interest in the facility, it should unregister its
+interest:
+
+	slow_work_unregister_user();
+
+
+===============
+ITEM OPERATIONS
+===============
+
+Each work item requires a table of operations of type struct slow_work_ops.
+All members are required:
+
+ (*) Get a reference on an item:
+
+	int (*get_ref)(struct slow_work *work);
+
+     This allows the thread pool to attempt to pin an item by getting a
+     reference on it.  This function should return 0 if the reference was
+     granted, or a -ve error otherwise.  If an error is returned,
+     slow_work_enqueue() will fail.
+
+     The reference is held whilst the item is queued and whilst it is being
+     executed.  The item may then be requeued with the same reference held, or
+     the reference will be released.
+
+ (*) Release a reference on an item:
+
+	void (*put_ref)(struct slow_work *work);
+
+     This allows the thread pool to unpin an item by releasing the reference on
+     it.  The thread pool will not touch the item again once this has been
+     called.
+
+ (*) Execute an item:
+
+	void (*execute)(struct slow_work *work);
+
+     This should perform the work required of the item.  It may sleep, it may
+     perform disk I/O and it may wait for locks.
+
+
+==================
+POOL CONFIGURATION
+==================
+
+The slow-work thread pool has a number of configurables:
+
+ (*) /proc/sys/kernel/slow-work/min-threads
+
+     The minimum number of threads that should be in the pool whilst it is in
+     use.  This may be anywhere between 2 and max-threads.
+
+ (*) /proc/sys/kernel/slow-work/max-threads
+
+     The maximum number of threads that should in the pool.  This may be
+     anywhere between min-threads and 255 or NR_CPUS * 2, whichever is greater.
+
+ (*) /proc/sys/kernel/slow-work/vslow-percentage
+
+     The percentage of active threads in the pool that may be used to execute
+     very slow work items.  This may be between 1 and 99.  The resultant number
+     is bounded to between 1 and one fewer than the number of active threads.
+     This ensures there is always at least one thread that can process very
+     slow work items, and always at least one thread that won't.
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 841a9365d5f..012858d2b11 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -346,6 +346,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     sbirq	- IRQ # for CMI8330 chip (SB16)
     sbdma8	- 8bit DMA # for CMI8330 chip (SB16)
     sbdma16	- 16bit DMA # for CMI8330 chip (SB16)
+    fmport	- (optional) OPL3 I/O port
+    mpuport	- (optional) MPU401 I/O port
+    mpuirq	- (optional) MPU401 irq #
 
     This module supports multiple cards and autoprobe.
 
@@ -388,34 +391,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
     
-  Module snd-cs4232
-  -----------------
-
-    Module for sound cards based on CS4232/CS4232A ISA chips.
-
-    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
-
-    with isapnp=0, the following options are available:
-
-    port	- port # for CS4232 chip (PnP setup - 0x534)
-    cport	- control port # for CS4232 chip (PnP setup - 0x120,0x210,0xf00)
-    mpu_port	- port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
-    fm_port	- FM port # for CS4232 chip (PnP setup - 0x388), -1 = disable
-    irq		- IRQ # for CS4232 chip (5,7,9,11,12,15)
-    mpu_irq	- IRQ # for MPU-401 UART (9,11,12,15)
-    dma1	- first DMA # for CS4232 chip (0,1,3)
-    dma2	- second DMA # for Yamaha CS4232 chip (0,1,3), -1 = disable
-    
-    This module supports multiple cards. This module does not support autoprobe
-    (if ISA PnP is not used) thus main port must be specified!!! Other ports are
-    optional.
-
-    The power-management is supported.
-    
   Module snd-cs4236
   -----------------
 
-    Module for sound cards based on CS4235/CS4236/CS4236B/CS4237B/
+    Module for sound cards based on CS4232/CS4232A,
+    	       	     	   	   CS4235/CS4236/CS4236B/CS4237B/
                                    CS4238B/CS4239 ISA chips.
 
     isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
@@ -437,6 +417,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+    This module is aliased as snd-cs4232 since it provides the old
+    snd-cs4232 functionality, too.
+
   Module snd-cs4281
   -----------------
 
@@ -606,6 +589,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
 
     port	- port # for ES-1688 chip (0x220,0x240,0x260)
+    fm_port	- port # for OPL3 (option; share the same port as default)
     mpu_port	- port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
     irq		- IRQ # for ES-1688 chip (5,7,9,10)
     mpu_irq	- IRQ # for MPU-401 port (5,7,9,10)
@@ -757,6 +741,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     model	- force the model name
     position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
     probe_mask  - Bitmask to probe codecs (default = -1, meaning all slots)
+    		  When the bit 8 (0x100) is set, the lower 8 bits are used
+		  as the "fixed" codec slots; i.e. the driver probes the
+		  slots regardless what hardware reports back
     probe_only	- Only probing and no codec initialization (default=off);
 		  Useful to check the initial codec status for debugging
     bdl_pos_adj	- Specifies the DMA IRQ timing delay in samples.
@@ -1185,6 +1172,54 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports multiple devices and PnP.
     
+  Module snd-msnd-classic
+  -----------------------
+
+    Module for Turtle Beach MultiSound Classic, Tahiti or Monterey
+    soundcards.
+
+    io		- Port # for msnd-classic card
+    irq		- IRQ # for msnd-classic card
+    mem		- Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000,
+		  0xe0000 or 0xe8000)
+    write_ndelay - enable write ndelay (default = 1)
+    calibrate_signal - calibrate signal (default = 0)
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+    digital	- Digital daughterboard present (default = 0)
+    cfg		- Config port (0x250, 0x260 or 0x270) default = PnP
+    reset	- Reset all devices
+    mpu_io	- MPU401 I/O port
+    mpu_irq	- MPU401 irq#
+    ide_io0	- IDE port #0
+    ide_io1	- IDE port #1
+    ide_irq	- IDE irq#
+    joystick_io	- Joystick I/O port
+
+    The driver requires firmware files "turtlebeach/msndinit.bin" and
+    "turtlebeach/msndperm.bin" in the proper firmware directory.
+
+    See Documentation/sound/oss/MultiSound for important information
+    about this driver.  Note that it has been discontinued, but the 
+    Voyetra Turtle Beach knowledge base entry for it is still available
+    at
+	http://www.turtlebeach.com/site/kb_ftp/790.asp
+
+  Module snd-msnd-pinnacle
+  ------------------------
+
+    Module for Turtle Beach MultiSound Pinnacle/Fiji soundcards.
+
+    io		- Port # for pinnacle/fiji card
+    irq		- IRQ # for pinnalce/fiji card
+    mem		- Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000,
+		  0xe0000 or 0xe8000)
+    write_ndelay - enable write ndelay (default = 1)
+    calibrate_signal - calibrate signal (default = 0)
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    The driver requires firmware files "turtlebeach/pndspini.bin" and
+    "turtlebeach/pndsperm.bin" in the proper firmware directory.
+
   Module snd-mtpav
   ----------------
 
@@ -1824,7 +1859,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   -------------------
 
     Module for sound cards based on the Asus AV100/AV200 chips,
-    i.e., Xonar D1, DX, D2, D2X and HDAV1.3 (Deluxe).
+    i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), and Essence STX.
 
     This module supports autoprobe and multiple cards.
 
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 0f5d26bea80..8eec05bc079 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -56,6 +56,7 @@ ALC262
   sony-assamd	Sony ASSAMD
   toshiba-s06	Toshiba S06
   toshiba-rx1	Toshiba RX1
+  tyan		Tyan Thunder n6650W (S2915-E)
   ultra		Samsung Q1 Ultra Vista model
   lenovo-3000	Lenovo 3000 y410
   nec		NEC Versa S9100
@@ -261,6 +262,8 @@ Conexant 5051
 =============
   laptop	Basic Laptop config (default)
   hp		HP Spartan laptop
+  hp-dv6736	HP dv6736
+  lenovo-x200	Lenovo X200 laptop
 
 STAC9200
 ========
@@ -278,6 +281,7 @@ STAC9200
   gateway-m4	Gateway laptops with EAPD control
   gateway-m4-2	Gateway laptops with EAPD control
   panasonic	Panasonic CF-74
+  auto		BIOS setup (default)
 
 STAC9205/9254
 =============
@@ -285,6 +289,8 @@ STAC9205/9254
   dell-m42	Dell (unknown)
   dell-m43	Dell Precision
   dell-m44	Dell Inspiron
+  eapd		Keep EAPD on (e.g. Gateway T1616)
+  auto		BIOS setup (default)
 
 STAC9220/9221
 =============
@@ -308,6 +314,7 @@ STAC9220/9221
   dell-d82	Dell (unknown)
   dell-m81	Dell (unknown)
   dell-m82	Dell XPS M1210
+  auto		BIOS setup (default)
 
 STAC9202/9250/9251
 ==================
@@ -319,6 +326,7 @@ STAC9202/9250/9251
   m3		Some Gateway MX series laptops
   m5		Some Gateway MX series laptops (MP6954)
   m6		Some Gateway NX series laptops
+  auto		BIOS setup (default)
 
 STAC9227/9228/9229/927x
 =======================
@@ -328,6 +336,7 @@ STAC9227/9228/9229/927x
   5stack	D965 5stack + SPDIF
   dell-3stack	Dell Dimension E520
   dell-bios	Fixes with Dell BIOS setup
+  auto		BIOS setup (default)
 
 STAC92HD71B*
 ============
@@ -335,7 +344,10 @@ STAC92HD71B*
   dell-m4-1	Dell desktops
   dell-m4-2	Dell desktops
   dell-m4-3	Dell desktops
-  hp-m4		HP dv laptops
+  hp-m4		HP mini 1000
+  hp-dv5	HP dv series
+  hp-hdx	HP HDX series
+  auto		BIOS setup (default)
 
 STAC92HD73*
 ===========
@@ -345,13 +357,16 @@ STAC92HD73*
   dell-m6-dmic	Dell desktops/laptops with digital mics
   dell-m6	Dell desktops/laptops with both type of mics
   dell-eq	Dell desktops/laptops
+  auto		BIOS setup (default)
 
 STAC92HD83*
 ===========
   ref		Reference board
   mic-ref	Reference board with power managment for ports
+  dell-s14	Dell laptop
+  auto		BIOS setup (default)
 
 STAC9872
 ========
-  vaio		Setup for VAIO FE550G/SZ110
-  vaio-ar Setup for VAIO AR
+  vaio		VAIO laptop without SPDIF
+  auto		BIOS setup (default)
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 8d68fff7183..c5948f2f9a2 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -109,6 +109,13 @@ slot, pass `probe_mask=1`.  For the first and the third slots, pass
 Since 2.6.29 kernel, the driver has a more robust probing method, so
 this error might happen rarely, though.
 
+On a machine with a broken BIOS, sometimes you need to force the
+driver to probe the codec slots the hardware doesn't report for use.
+In such a case, turn the bit 8 (0x100) of `probe_mask` option on.
+Then the rest 8 bits are passed as the codec slots to probe
+unconditionally.  For example, `probe_mask=0x103` will force to probe
+the codec slots 0 and 1 no matter what the hardware reports.
+
 
 Interrupt Handling
 ~~~~~~~~~~~~~~~~~~
@@ -358,10 +365,26 @@ modelname::
   to this file.
 init_verbs::
   The extra verbs to execute at initialization.  You can add a verb by
-  writing to this file.  Pass tree numbers, nid, verb and parameter.
+  writing to this file.  Pass three numbers: nid, verb and parameter
+  (separated with a space).
 hints::
-  Shows hint strings for codec parsers for any use.  Right now it's
-  not used.
+  Shows / stores hint strings for codec parsers for any use.
+  Its format is `key = value`.  For example, passing `hp_detect = yes`
+  to IDT/STAC codec parser will result in the disablement of the
+  headphone detection.
+init_pin_configs::
+  Shows the initial pin default config values set by BIOS.
+driver_pin_configs::
+  Shows the pin default values set by the codec parser explicitly.
+  This doesn't show all pin values but only the changed values by
+  the parser.  That is, if the parser doesn't change the pin default
+  config values by itself, this will contain nothing.
+user_pin_configs::
+  Shows the pin default config values to override the BIOS setup.
+  Writing this (with two numbers, NID and value) appends the new
+  value.  The given will be used instead of the initial BIOS value at
+  the next reconfiguration time.  Note that this config will override
+  even the driver pin configs, too.
 reconfig::
   Triggers the codec re-configuration.  When any value is written to
   this file, the driver re-initialize and parses the codec tree
@@ -371,6 +394,14 @@ clear::
   Resets the codec, removes the mixer elements and PCM stuff of the
   specified codec, and clear all init verbs and hints.
 
+For example, when you want to change the pin default configuration
+value of the pin widget 0x14 to 0x9993013f, and let the driver
+re-configure based on that state, run like below:
+------------------------------------------------------------------------
+  # echo 0x14 0x9993013f > /sys/class/sound/hwC0D0/user_pin_configs
+  # echo 1 > /sys/class/sound/hwC0D0/reconfig  
+------------------------------------------------------------------------
+
 
 Power-Saving
 ~~~~~~~~~~~~
@@ -461,6 +492,16 @@ run with `--no-upload` option, and attach the generated file.
 There are some other useful options.  See `--help` option output for
 details.
 
+When a probe error occurs or when the driver obviously assigns a
+mismatched model, it'd be helpful to load the driver with
+`probe_only=1` option (at best after the cold reboot) and run
+alsa-info at this state.  With this option, the driver won't configure
+the mixer and PCM but just tries to probe the codec slot.  After
+probing, the proc file is available, so you can get the raw codec
+information before modified by the driver.  Of course, the driver
+isn't usable with `probe_only=1`.  But you can continue the
+configuration via hwdep sysfs file if hda-reconfig option is enabled.
+
 
 hda-verb
 ~~~~~~~~
diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt
index 46f9684d0b2..9e6763264a2 100644
--- a/Documentation/sound/alsa/soc/dapm.txt
+++ b/Documentation/sound/alsa/soc/dapm.txt
@@ -116,6 +116,9 @@ SOC_DAPM_SINGLE("HiFi Playback Switch", WM8731_APANA, 4, 1, 0),
 SND_SOC_DAPM_MIXER("Output Mixer", WM8731_PWR, 4, 1, wm8731_output_mixer_controls,
 	ARRAY_SIZE(wm8731_output_mixer_controls)),
 
+If you dont want the mixer elements prefixed with the name of the mixer widget,
+you can use SND_SOC_DAPM_MIXER_NAMED_CTL instead. the parameters are the same
+as for SND_SOC_DAPM_MIXER.
 
 2.3 Platform/Machine domain Widgets
 -----------------------------------
diff --git a/Documentation/sound/alsa/soc/jack.txt b/Documentation/sound/alsa/soc/jack.txt
new file mode 100644
index 00000000000..fcf82a41729
--- /dev/null
+++ b/Documentation/sound/alsa/soc/jack.txt
@@ -0,0 +1,71 @@
+ASoC jack detection
+===================
+
+ALSA has a standard API for representing physical jacks to user space,
+the kernel side of which can be seen in include/sound/jack.h.  ASoC
+provides a version of this API adding two additional features:
+
+ - It allows more than one jack detection method to work together on one
+   user visible jack.  In embedded systems it is common for multiple
+   to be present on a single jack but handled by separate bits of
+   hardware.
+
+ - Integration with DAPM, allowing DAPM endpoints to be updated
+   automatically based on the detected jack status (eg, turning off the
+   headphone outputs if no headphones are present).
+
+This is done by splitting the jacks up into three things working
+together: the jack itself represented by a struct snd_soc_jack, sets of
+snd_soc_jack_pins representing DAPM endpoints to update and blocks of
+code providing jack reporting mechanisms.
+
+For example, a system may have a stereo headset jack with two reporting
+mechanisms, one for the headphone and one for the microphone.  Some
+systems won't be able to use their speaker output while a headphone is
+connected and so will want to make sure to update both speaker and
+headphone when the headphone jack status changes.
+
+The jack - struct snd_soc_jack
+==============================
+
+This represents a physical jack on the system and is what is visible to
+user space.  The jack itself is completely passive, it is set up by the
+machine driver and updated by jack detection methods.
+
+Jacks are created by the machine driver calling snd_soc_jack_new().
+
+snd_soc_jack_pin
+================
+
+These represent a DAPM pin to update depending on some of the status
+bits supported by the jack.  Each snd_soc_jack has zero or more of these
+which are updated automatically.  They are created by the machine driver
+and associated with the jack using snd_soc_jack_add_pins().  The status
+of the endpoint may configured to be the opposite of the jack status if
+required (eg, enabling a built in microphone if a microphone is not
+connected via a jack).
+
+Jack detection methods
+======================
+
+Actual jack detection is done by code which is able to monitor some
+input to the system and update a jack by calling snd_soc_jack_report(),
+specifying a subset of bits to update.  The jack detection code should
+be set up by the machine driver, taking configuration for the jack to
+update and the set of things to report when the jack is connected.
+
+Often this is done based on the status of a GPIO - a handler for this is
+provided by the snd_soc_jack_add_gpio() function.  Other methods are
+also available, for example integrated into CODECs.  One example of
+CODEC integrated jack detection can be see in the WM8350 driver.
+
+Each jack may have multiple reporting mechanisms, though it will need at
+least one to be useful.
+
+Machine drivers
+===============
+
+These are all hooked together by the machine driver depending on the
+system hardware.  The machine driver will set up the snd_soc_jack and
+the list of pins to update then set up one or more jack detection
+mechanisms to update that jack based on their current status.
diff --git a/Documentation/sound/oss/CS4232 b/Documentation/sound/oss/CS4232
deleted file mode 100644
index 7d6af7a5c1c..00000000000
--- a/Documentation/sound/oss/CS4232
+++ /dev/null
@@ -1,23 +0,0 @@
-To configure the Crystal CS423x sound chip and activate its DSP functions,
-modules may be loaded in this order:
-  
-	modprobe sound
-	insmod ad1848
-	insmod uart401
-	insmod cs4232 io=* irq=* dma=* dma2=*
-  
-This is the meaning of the parameters:
-  
-	io--I/O address of the Windows Sound System (normally 0x534)
-	irq--IRQ of this device
-	dma and dma2--DMA channels (DMA2 may be 0)
-  
-On some cards, the board attempts to do non-PnP setup, and fails.  If you
-have problems, use Linux' PnP facilities. 
-  
-To get MIDI facilities add
-  
-	insmod opl3 io=*
-  
-where "io" is the I/O address of the OPL3 synthesizer. This will be shown
-in /proc/sys/pnp and is normally 0x388.
diff --git a/Documentation/sound/oss/Introduction b/Documentation/sound/oss/Introduction
index f04ba6bb739..75d967ff926 100644
--- a/Documentation/sound/oss/Introduction
+++ b/Documentation/sound/oss/Introduction
@@ -80,7 +80,7 @@ Notes:
     additional features.
 
 2.  The commercial OSS driver may be obtained from the site:
-    http://www/opensound.com.  This may be used for cards that
+    http://www.opensound.com.  This may be used for cards that
     are unsupported by the kernel driver, or may be used
     by other operating systems.  
 
diff --git a/Documentation/sysctl/00-INDEX b/Documentation/sysctl/00-INDEX
index a20a9066dc4..1286f455992 100644
--- a/Documentation/sysctl/00-INDEX
+++ b/Documentation/sysctl/00-INDEX
@@ -10,6 +10,8 @@ fs.txt
 	- documentation for /proc/sys/fs/*.
 kernel.txt
 	- documentation for /proc/sys/kernel/*.
+net.txt
+	- documentation for /proc/sys/net/*.
 sunrpc.txt
 	- documentation for /proc/sys/sunrpc/*.
 vm.txt
diff --git a/Documentation/sysctl/fs.txt b/Documentation/sysctl/fs.txt
index f99254327ae..1458448436c 100644
--- a/Documentation/sysctl/fs.txt
+++ b/Documentation/sysctl/fs.txt
@@ -1,5 +1,6 @@
 Documentation for /proc/sys/fs/*	kernel version 2.2.10
 	(c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+	(c) 2009,        Shen Feng<shen@cn.fujitsu.com>
 
 For general info and legal blurb, please look in README.
 
@@ -14,7 +15,12 @@ kernel. Since some of the files _can_ be used to screw up your
 system, it is advisable to read both documentation and source
 before actually making adjustments.
 
+1. /proc/sys/fs
+----------------------------------------------------------
+
 Currently, these files are in /proc/sys/fs:
+- aio-max-nr
+- aio-nr
 - dentry-state
 - dquot-max
 - dquot-nr
@@ -30,8 +36,15 @@ Currently, these files are in /proc/sys/fs:
 - super-max
 - super-nr
 
-Documentation for the files in /proc/sys/fs/binfmt_misc is
-in Documentation/binfmt_misc.txt.
+==============================================================
+
+aio-nr & aio-max-nr:
+
+aio-nr is the running total of the number of events specified on the
+io_setup system call for all currently active aio contexts.  If aio-nr
+reaches aio-max-nr then io_setup will fail with EAGAIN.  Note that
+raising aio-max-nr does not result in the pre-allocation or re-sizing
+of any kernel data structures.
 
 ==============================================================
 
@@ -178,3 +191,60 @@ requests.  aio-max-nr allows you to change the maximum value
 aio-nr can grow to.
 
 ==============================================================
+
+
+2. /proc/sys/fs/binfmt_misc
+----------------------------------------------------------
+
+Documentation for the files in /proc/sys/fs/binfmt_misc is
+in Documentation/binfmt_misc.txt.
+
+
+3. /proc/sys/fs/mqueue - POSIX message queues filesystem
+----------------------------------------------------------
+
+The "mqueue"  filesystem provides  the necessary kernel features to enable the
+creation of a  user space  library that  implements  the  POSIX message queues
+API (as noted by the  MSG tag in the  POSIX 1003.1-2001 version  of the System
+Interfaces specification.)
+
+The "mqueue" filesystem contains values for determining/setting  the amount of
+resources used by the file system.
+
+/proc/sys/fs/mqueue/queues_max is a read/write  file for  setting/getting  the
+maximum number of message queues allowed on the system.
+
+/proc/sys/fs/mqueue/msg_max  is  a  read/write file  for  setting/getting  the
+maximum number of messages in a queue value.  In fact it is the limiting value
+for another (user) limit which is set in mq_open invocation. This attribute of
+a queue must be less or equal then msg_max.
+
+/proc/sys/fs/mqueue/msgsize_max is  a read/write  file for setting/getting the
+maximum  message size value (it is every  message queue's attribute set during
+its creation).
+
+
+4. /proc/sys/fs/epoll - Configuration options for the epoll interface
+--------------------------------------------------------
+
+This directory contains configuration options for the epoll(7) interface.
+
+max_user_instances
+------------------
+
+This is the maximum number of epoll file descriptors that a single user can
+have open at a given time. The default value is 128, and should be enough
+for normal users.
+
+max_user_watches
+----------------
+
+Every epoll file descriptor can store a number of files to be monitored
+for event readiness. Each one of these monitored files constitutes a "watch".
+This configuration option sets the maximum number of "watches" that are
+allowed for each user.
+Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
+on a 64bit one.
+The current default value for  max_user_watches  is the 1/32 of the available
+low memory, divided for the "watch" cost in bytes.
+
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index a4ccdd1981c..f11ca7979fa 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -1,5 +1,6 @@
 Documentation for /proc/sys/kernel/*	kernel version 2.2.10
 	(c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+	(c) 2009,        Shen Feng<shen@cn.fujitsu.com>
 
 For general info and legal blurb, please look in README.
 
@@ -18,6 +19,7 @@ Currently, these files might (depending on your configuration)
 show up in /proc/sys/kernel:
 - acpi_video_flags
 - acct
+- auto_msgmni
 - core_pattern
 - core_uses_pid
 - ctrl-alt-del
@@ -33,6 +35,7 @@ show up in /proc/sys/kernel:
 - msgmax
 - msgmnb
 - msgmni
+- nmi_watchdog
 - osrelease
 - ostype
 - overflowgid
@@ -40,6 +43,7 @@ show up in /proc/sys/kernel:
 - panic
 - pid_max
 - powersave-nap               [ PPC only ]
+- panic_on_unrecovered_nmi
 - printk
 - randomize_va_space
 - real-root-dev               ==> Documentation/initrd.txt
@@ -55,6 +59,7 @@ show up in /proc/sys/kernel:
 - sysrq                       ==> Documentation/sysrq.txt
 - tainted
 - threads-max
+- unknown_nmi_panic
 - version
 
 ==============================================================
@@ -381,3 +386,51 @@ can be ORed together:
  512 - A kernel warning has occurred.
 1024 - A module from drivers/staging was loaded.
 
+==============================================================
+
+auto_msgmni:
+
+Enables/Disables automatic recomputing of msgmni upon memory add/remove or
+upon ipc namespace creation/removal (see the msgmni description above).
+Echoing "1" into this file enables msgmni automatic recomputing.
+Echoing "0" turns it off.
+auto_msgmni default value is 1.
+
+==============================================================
+
+nmi_watchdog:
+
+Enables/Disables the NMI watchdog on x86 systems.  When the value is non-zero
+the NMI watchdog is enabled and will continuously test all online cpus to
+determine whether or not they are still functioning properly. Currently,
+passing "nmi_watchdog=" parameter at boot time is required for this function
+to work.
+
+If LAPIC NMI watchdog method is in use (nmi_watchdog=2 kernel parameter), the
+NMI watchdog shares registers with oprofile. By disabling the NMI watchdog,
+oprofile may have more registers to utilize.
+
+==============================================================
+
+unknown_nmi_panic:
+
+The value in this file affects behavior of handling NMI. When the value is
+non-zero, unknown NMI is trapped and then panic occurs. At that time, kernel
+debugging information is displayed on console.
+
+NMI switch that most IA32 servers have fires unknown NMI up, for example.
+If a system hangs up, try pressing the NMI switch.
+
+==============================================================
+
+panic_on_unrecovered_nmi:
+
+The default Linux behaviour on an NMI of either memory or unknown is to continue
+operation. For many environments such as scientific computing it is preferable
+that the box is taken out and the error dealt with than an uncorrected
+parity/ECC error get propogated.
+
+A small number of systems do generate NMI's for bizarre random reasons such as
+power management so the default is off. That sysctl works like the existing
+panic controls already in that directory.
+
diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt
new file mode 100644
index 00000000000..a34d55b6544
--- /dev/null
+++ b/Documentation/sysctl/net.txt
@@ -0,0 +1,175 @@
+Documentation for /proc/sys/net/*	kernel version 2.4.0-test11-pre4
+	(c) 1999		Terrehon Bowden <terrehon@pacbell.net>
+				Bodo Bauer <bb@ricochet.net>
+	(c) 2000		Jorge Nerin <comandante@zaralinux.com>
+	(c) 2009		Shen Feng <shen@cn.fujitsu.com>
+
+For general info and legal blurb, please look in README.
+
+==============================================================
+
+This file contains the documentation for the sysctl files in
+/proc/sys/net and is valid for Linux kernel version 2.4.0-test11-pre4.
+
+The interface  to  the  networking  parts  of  the  kernel  is  located  in
+/proc/sys/net. The following table shows all possible subdirectories.You may
+see only some of them, depending on your kernel's configuration.
+
+
+Table : Subdirectories in /proc/sys/net
+..............................................................................
+ Directory Content             Directory  Content
+ core      General parameter   appletalk  Appletalk protocol
+ unix      Unix domain sockets netrom     NET/ROM
+ 802       E802 protocol       ax25       AX25
+ ethernet  Ethernet protocol   rose       X.25 PLP layer
+ ipv4      IP version 4        x25        X.25 protocol
+ ipx       IPX                 token-ring IBM token ring
+ bridge    Bridging            decnet     DEC net
+ ipv6      IP version 6
+..............................................................................
+
+1. /proc/sys/net/core - Network core options
+-------------------------------------------------------
+
+rmem_default
+------------
+
+The default setting of the socket receive buffer in bytes.
+
+rmem_max
+--------
+
+The maximum receive socket buffer size in bytes.
+
+wmem_default
+------------
+
+The default setting (in bytes) of the socket send buffer.
+
+wmem_max
+--------
+
+The maximum send socket buffer size in bytes.
+
+message_burst and message_cost
+------------------------------
+
+These parameters  are used to limit the warning messages written to the kernel
+log from  the  networking  code.  They  enforce  a  rate  limit  to  make  a
+denial-of-service attack  impossible. A higher message_cost factor, results in
+fewer messages that will be written. Message_burst controls when messages will
+be dropped.  The  default  settings  limit  warning messages to one every five
+seconds.
+
+warnings
+--------
+
+This controls console messages from the networking stack that can occur because
+of problems on the network like duplicate address or bad checksums. Normally,
+this should be enabled, but if the problem persists the messages can be
+disabled.
+
+netdev_budget
+-------------
+
+Maximum number of packets taken from all interfaces in one polling cycle (NAPI
+poll). In one polling cycle interfaces which are registered to polling are
+probed in a round-robin manner. The limit of packets in one such probe can be
+set per-device via sysfs class/net/<device>/weight .
+
+netdev_max_backlog
+------------------
+
+Maximum number  of  packets,  queued  on  the  INPUT  side, when the interface
+receives packets faster than kernel can process them.
+
+optmem_max
+----------
+
+Maximum ancillary buffer size allowed per socket. Ancillary data is a sequence
+of struct cmsghdr structures with appended data.
+
+2. /proc/sys/net/unix - Parameters for Unix domain sockets
+-------------------------------------------------------
+
+There is only one file in this directory.
+unix_dgram_qlen limits the max number of datagrams queued in Unix domain
+socket's buffer. It will not take effect unless PF_UNIX flag is spicified.
+
+
+3. /proc/sys/net/ipv4 - IPV4 settings
+-------------------------------------------------------
+Please see: Documentation/networking/ip-sysctl.txt and ipvs-sysctl.txt for
+descriptions of these entries.
+
+
+4. Appletalk
+-------------------------------------------------------
+
+The /proc/sys/net/appletalk  directory  holds the Appletalk configuration data
+when Appletalk is loaded. The configurable parameters are:
+
+aarp-expiry-time
+----------------
+
+The amount  of  time  we keep an ARP entry before expiring it. Used to age out
+old hosts.
+
+aarp-resolve-time
+-----------------
+
+The amount of time we will spend trying to resolve an Appletalk address.
+
+aarp-retransmit-limit
+---------------------
+
+The number of times we will retransmit a query before giving up.
+
+aarp-tick-time
+--------------
+
+Controls the rate at which expires are checked.
+
+The directory  /proc/net/appletalk  holds the list of active Appletalk sockets
+on a machine.
+
+The fields  indicate  the DDP type, the local address (in network:node format)
+the remote  address,  the  size of the transmit pending queue, the size of the
+received queue  (bytes waiting for applications to read) the state and the uid
+owning the socket.
+
+/proc/net/atalk_iface lists  all  the  interfaces  configured for appletalk.It
+shows the  name  of the interface, its Appletalk address, the network range on
+that address  (or  network number for phase 1 networks), and the status of the
+interface.
+
+/proc/net/atalk_route lists  each  known  network  route.  It lists the target
+(network) that the route leads to, the router (may be directly connected), the
+route flags, and the device the route is using.
+
+
+5. IPX
+-------------------------------------------------------
+
+The IPX protocol has no tunable values in proc/sys/net.
+
+The IPX  protocol  does,  however,  provide  proc/net/ipx. This lists each IPX
+socket giving  the  local  and  remote  addresses  in  Novell  format (that is
+network:node:port). In  accordance  with  the  strange  Novell  tradition,
+everything but the port is in hex. Not_Connected is displayed for sockets that
+are not  tied to a specific remote address. The Tx and Rx queue sizes indicate
+the number  of  bytes  pending  for  transmission  and  reception.  The  state
+indicates the  state  the  socket  is  in and the uid is the owning uid of the
+socket.
+
+The /proc/net/ipx_interface  file lists all IPX interfaces. For each interface
+it gives  the network number, the node number, and indicates if the network is
+the primary  network.  It  also  indicates  which  device  it  is bound to (or
+Internal for  internal  networks)  and  the  Frame  Type if appropriate. Linux
+supports 802.3,  802.2,  802.2  SNAP  and DIX (Blue Book) ethernet framing for
+IPX.
+
+The /proc/net/ipx_route  table  holds  a list of IPX routes. For each route it
+gives the  destination  network, the router node (or Directly) and the network
+address of the router (or Connected) for internal networks.
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 3197fc83bc5..97c4b328432 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -39,6 +39,8 @@ Currently, these files are in /proc/sys/vm:
 - nr_hugepages
 - nr_overcommit_hugepages
 - nr_pdflush_threads
+- nr_pdflush_threads_min
+- nr_pdflush_threads_max
 - nr_trim_pages         (only if CONFIG_MMU=n)
 - numa_zonelist_order
 - oom_dump_tasks
@@ -463,6 +465,32 @@ The default value is 0.
 
 ==============================================================
 
+nr_pdflush_threads_min
+
+This value controls the minimum number of pdflush threads.
+
+At boot time, the kernel will create and maintain 'nr_pdflush_threads_min'
+threads for the kernel's lifetime.
+
+The default value is 2.  The minimum value you can specify is 1, and
+the maximum value is the current setting of 'nr_pdflush_threads_max'.
+
+See 'nr_pdflush_threads_max' below for more information.
+
+==============================================================
+
+nr_pdflush_threads_max
+
+This value controls the maximum number of pdflush threads that can be
+created.  The pdflush algorithm will create a new pdflush thread (up to
+this maximum) if no pdflush threads have been available for >= 1 second.
+
+The default value is 8.  The minimum value you can specify is the
+current value of 'nr_pdflush_threads_min' and the
+maximum is 1000.
+
+==============================================================
+
 overcommit_memory:
 
 This value contains a flag that enables memory overcommitment.
diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index 9e592c718af..cf42b820ff9 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -81,6 +81,8 @@ On all -  write a character to /proc/sysrq-trigger.  e.g.:
 
 'i'     - Send a SIGKILL to all processes, except for init.
 
+'j'     - Forcibly "Just thaw it" - filesystems frozen by the FIFREEZE ioctl.
+
 'k'     - Secure Access Key (SAK) Kills all programs on the current virtual
           console. NOTE: See important comments below in SAK section.
 
@@ -113,6 +115,8 @@ On all -  write a character to /proc/sysrq-trigger.  e.g.:
 
 'x'	- Used by xmon interface on ppc/powerpc platforms.
 
+'z'	- Dump the ftrace buffer
+
 '0'-'9' - Sets the console log level, controlling which kernel messages
           will be printed to your console. ('0', for example would make
           it so that only emergency messages like PANICs or OOPSes would
@@ -160,6 +164,9 @@ t'E'rm and k'I'll are useful if you have some sort of runaway process you
 are unable to kill any other way, especially if it's spawning other
 processes.
 
+"'J'ust thaw it" is useful if your system becomes unresponsive due to a frozen
+(probably root) filesystem via the FIFREEZE ioctl.
+
 *  Sometimes SysRq seems to get 'stuck' after using it, what can I do?
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 That happens to me, also. I've found that tapping shift, alt, and control
diff --git a/Documentation/tracepoints.txt b/Documentation/tracepoints.txt
index 6f0a044f5b5..c0e1ceed75a 100644
--- a/Documentation/tracepoints.txt
+++ b/Documentation/tracepoints.txt
@@ -45,8 +45,8 @@ In include/trace/subsys.h :
 #include <linux/tracepoint.h>
 
 DECLARE_TRACE(subsys_eventname,
-	TPPROTO(int firstarg, struct task_struct *p),
-	TPARGS(firstarg, p));
+	TP_PROTO(int firstarg, struct task_struct *p),
+	TP_ARGS(firstarg, p));
 
 In subsys/file.c (where the tracing statement must be added) :
 
@@ -66,10 +66,10 @@ Where :
     - subsys is the name of your subsystem.
     - eventname is the name of the event to trace.
 
-- TPPROTO(int firstarg, struct task_struct *p) is the prototype of the
+- TP_PROTO(int firstarg, struct task_struct *p) is the prototype of the
   function called by this tracepoint.
 
-- TPARGS(firstarg, p) are the parameters names, same as found in the
+- TP_ARGS(firstarg, p) are the parameters names, same as found in the
   prototype.
 
 Connecting a function (probe) to a tracepoint is done by providing a
@@ -103,13 +103,14 @@ used to export the defined tracepoints.
 
 * Probe / tracepoint example
 
-See the example provided in samples/tracepoints/src
+See the example provided in samples/tracepoints
 
-Compile them with your kernel.
+Compile them with your kernel.  They are built during 'make' (not
+'make modules') when CONFIG_SAMPLE_TRACEPOINTS=m.
 
 Run, as root :
-modprobe tracepoint-example (insmod order is not important)
-modprobe tracepoint-probe-example
-cat /proc/tracepoint-example (returns an expected error)
-rmmod tracepoint-example tracepoint-probe-example
+modprobe tracepoint-sample (insmod order is not important)
+modprobe tracepoint-probe-sample
+cat /proc/tracepoint-sample (returns an expected error)
+rmmod tracepoint-sample tracepoint-probe-sample
 dmesg
diff --git a/Documentation/tracers/mmiotrace.txt b/Documentation/tracers/mmiotrace.txt
index cde23b4a12a..5731c67abc5 100644
--- a/Documentation/tracers/mmiotrace.txt
+++ b/Documentation/tracers/mmiotrace.txt
@@ -78,12 +78,10 @@ to view your kernel log and look for "mmiotrace has lost events" warning. If
 events were lost, the trace is incomplete. You should enlarge the buffers and
 try again. Buffers are enlarged by first seeing how large the current buffers
 are:
-$ cat /debug/tracing/trace_entries
+$ cat /debug/tracing/buffer_size_kb
 gives you a number. Approximately double this number and write it back, for
 instance:
-$ echo 0 > /debug/tracing/tracing_enabled
-$ echo 128000 > /debug/tracing/trace_entries
-$ echo 1 > /debug/tracing/tracing_enabled
+$ echo 128000 > /debug/tracing/buffer_size_kb
 Then start again from the top.
 
 If you are doing a trace for a driver project, e.g. Nouveau, you should also
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 270481906dc..6c3c625b7f3 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -229,16 +229,26 @@ struct usbmon_packet {
 	int status;		/* 28: */
 	unsigned int length;	/* 32: Length of data (submitted or actual) */
 	unsigned int len_cap;	/* 36: Delivered length */
-	unsigned char setup[8];	/* 40: Only for Control 'S' */
-};				/* 48 bytes total */
+	union {			/* 40: */
+		unsigned char setup[SETUP_LEN];	/* Only for Control S-type */
+		struct iso_rec {		/* Only for ISO */
+			int error_count;
+			int numdesc;
+		} iso;
+	} s;
+	int interval;		/* 48: Only for Interrupt and ISO */
+	int start_frame;	/* 52: For ISO */
+	unsigned int xfer_flags; /* 56: copy of URB's transfer_flags */
+	unsigned int ndesc;	/* 60: Actual number of ISO descriptors */
+};				/* 64 total length */
 
 These events can be received from a character device by reading with read(2),
-with an ioctl(2), or by accessing the buffer with mmap.
+with an ioctl(2), or by accessing the buffer with mmap. However, read(2)
+only returns first 48 bytes for compatibility reasons.
 
 The character device is usually called /dev/usbmonN, where N is the USB bus
 number. Number zero (/dev/usbmon0) is special and means "all buses".
-However, this feature is not implemented yet. Note that specific naming
-policy is set by your Linux distribution.
+Note that specific naming policy is set by your Linux distribution.
 
 If you create /dev/usbmon0 by hand, make sure that it is owned by root
 and has mode 0600. Otherwise, unpriviledged users will be able to snoop
@@ -279,9 +289,10 @@ size is out of [unspecified] bounds for this kernel, the call fails with
 This call returns the current size of the buffer in bytes.
 
  MON_IOCX_GET, defined as _IOW(MON_IOC_MAGIC, 6, struct mon_get_arg)
+ MON_IOCX_GETX, defined as _IOW(MON_IOC_MAGIC, 10, struct mon_get_arg)
 
-This call waits for events to arrive if none were in the kernel buffer,
-then returns the first event. Its argument is a pointer to the following
+These calls wait for events to arrive if none were in the kernel buffer,
+then return the first event. The argument is a pointer to the following
 structure:
 
 struct mon_get_arg {
@@ -294,6 +305,8 @@ Before the call, hdr, data, and alloc should be filled. Upon return, the area
 pointed by hdr contains the next event structure, and the data buffer contains
 the data, if any. The event is removed from the kernel buffer.
 
+The MON_IOCX_GET copies 48 bytes, MON_IOCX_GETX copies 64 bytes.
+
  MON_IOCX_MFETCH, defined as _IOWR(MON_IOC_MAGIC, 7, struct mon_mfetch_arg)
 
 This ioctl is primarily used when the application accesses the buffer
diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv
index 0d93fa1ac25..f11c583295e 100644
--- a/Documentation/video4linux/CARDLIST.bttv
+++ b/Documentation/video4linux/CARDLIST.bttv
@@ -135,7 +135,7 @@
 134 -> Adlink RTV24
 135 -> DViCO FusionHDTV 5 Lite                             [18ac:d500]
 136 -> Acorp Y878F                                         [9511:1540]
-137 -> Conceptronic CTVFMi v2
+137 -> Conceptronic CTVFMi v2                              [036e:109e]
 138 -> Prolink Pixelview PV-BT878P+ (Rev.2E)
 139 -> Prolink PixelView PlayTV MPEG2 PV-M4900
 140 -> Osprey 440                                          [0070:ff07]
@@ -154,3 +154,7 @@
 153 -> PHYTEC VD-012 (bt878)
 154 -> PHYTEC VD-012-X1 (bt878)
 155 -> PHYTEC VD-012-X2 (bt878)
+156 -> IVCE-8784                                           [0000:f050,0001:f050,0002:f050,0003:f050]
+157 -> Geovision GV-800(S) (master)                        [800a:763d]
+158 -> Geovision GV-800(S) (slave)                         [800b:763d,800c:763d,800d:763d]
+159 -> ProVideo PV183                                      [1830:1540,1831:1540,1832:1540,1833:1540,1834:1540,1835:1540,1836:1540,1837:1540]
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 35ea130e989..91aa3c0f0dd 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -12,3 +12,7 @@
  11 -> DViCO FusionHDTV DVB-T Dual Express                 [18ac:db78]
  12 -> Leadtek Winfast PxDVR3200 H                         [107d:6681]
  13 -> Compro VideoMate E650F                              [185b:e800]
+ 14 -> TurboSight TBS 6920                                 [6920:8888]
+ 15 -> TeVii S470                                          [d470:9022]
+ 16 -> DVBWorld DVB-S2 2005                                [0001:2005]
+ 17 -> NetUP Dual DVB-S2 CI                                [1b55:2a2c]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 0d08f1edcf6..71e9db0b26f 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -77,3 +77,4 @@
  76 -> SATTRADE ST4200 DVB-S/S2                            [b200:4200]
  77 -> TBS 8910 DVB-S                                      [8910:8888]
  78 -> Prof 6200 DVB-S                                     [b022:3022]
+ 79 -> Terratec Cinergy HT PCI MKII                        [153b:1177]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 75bded8a4aa..78d0a6eed57 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -7,12 +7,12 @@
   6 -> Terratec Cinergy 200 USB                 (em2800)
   7 -> Leadtek Winfast USB II                   (em2800)        [0413:6023]
   8 -> Kworld USB2800                           (em2800)
-  9 -> Pinnacle Dazzle DVC 90/DVC 100           (em2820/em2840) [2304:0207,2304:021a]
+  9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker (em2820/em2840) [1b80:e302,2304:0207,2304:021a]
  10 -> Hauppauge WinTV HVR 900                  (em2880)        [2040:6500]
  11 -> Terratec Hybrid XS                       (em2880)        [0ccd:0042]
  12 -> Kworld PVR TV 2800 RF                    (em2820/em2840)
  13 -> Terratec Prodigy XS                      (em2880)        [0ccd:0047]
- 14 -> Pixelview Prolink PlayTV USB 2.0         (em2820/em2840)
+ 14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 (em2820/em2840)
  15 -> V-Gear PocketTV                          (em2800)
  16 -> Hauppauge WinTV HVR 950                  (em2883)        [2040:6513,2040:6517,2040:651b]
  17 -> Pinnacle PCTV HD Pro Stick               (em2880)        [2304:0227]
@@ -30,7 +30,6 @@
  30 -> Videology 20K14XUSB USB2.0               (em2820/em2840)
  31 -> Usbgear VD204v9                          (em2821)
  32 -> Supercomp USB 2.0 TV                     (em2821)
- 33 -> SIIG AVTuner-PVR/Prolink PlayTV USB 2.0  (em2821)
  34 -> Terratec Cinergy A Hybrid XS             (em2860)        [0ccd:004f]
  35 -> Typhoon DVD Maker                        (em2860)
  36 -> NetGMBH Cam                              (em2860)
@@ -58,3 +57,7 @@
  58 -> Compro VideoMate ForYou/Stereo           (em2820/em2840) [185b:2041]
  60 -> Hauppauge WinTV HVR 850                  (em2883)        [2040:651f]
  61 -> Pixelview PlayTV Box 4 USB 2.0           (em2820/em2840)
+ 62 -> Gadmei TVR200                            (em2820/em2840)
+ 63 -> Kaiomy TVnPC U2                          (em2860)        [eb1a:e303]
+ 64 -> Easy Cap Capture DC-60                   (em2860)
+ 65 -> IO-DATA GV-MVP/SZ                        (em2820/em2840) [04bb:0515]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index b8d470596b0..6dacf282525 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -153,3 +153,5 @@
 152 -> Asus Tiger Rev:1.00                      [1043:4857]
 153 -> Kworld Plus TV Analog Lite PCI           [17de:7128]
 154 -> Avermedia AVerTV GO 007 FM Plus          [1461:f31d]
+155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid  [0070:6706,0070:6708]
+156 -> Hauppauge WinTV-HVR1110r3                [0070:6707,0070:6709,0070:670a]
diff --git a/Documentation/video4linux/Zoran b/Documentation/video4linux/Zoran
index 295462b2317..0e89e767629 100644
--- a/Documentation/video4linux/Zoran
+++ b/Documentation/video4linux/Zoran
@@ -401,8 +401,7 @@ Additional notes for software developers:
    first set the correct norm. Well, it seems logically correct: TV
    standard is "more constant" for current country than geometry
    settings of a variety of TV capture cards which may work in ITU or
-   square pixel format. Remember that users now can lock the norm to
-   avoid any ambiguity.
+   square pixel format.
 --
 Please note that lavplay/lavrec are also included in the MJPEG-tools
 (http://mjpeg.sf.net/).
diff --git a/Documentation/video4linux/bttv/Insmod-options b/Documentation/video4linux/bttv/Insmod-options
index 5ef75787f83..bbe3ed667d9 100644
--- a/Documentation/video4linux/bttv/Insmod-options
+++ b/Documentation/video4linux/bttv/Insmod-options
@@ -81,16 +81,6 @@ tuner.o
 		pal=[bdgil]	select PAL variant (used for some tuners
 				only, important for the audio carrier).
 
-tvmixer.o
-	registers a mixer device for the TV card's volume/bass/treble
-	controls (requires a i2c audio control chip like the msp3400).
-
-	insmod args:
-		debug=1		print some debug info to the syslog.
-		devnr=n		allocate device #n (0 == /dev/mixer,
-				1 = /dev/mixer1, ...), default is to
-				use the first free one.
-
 tvaudio.o
 	new, experimental module which is supported to provide a single
 	driver for all simple i2c audio control chips (tda/tea*).
diff --git a/Documentation/video4linux/bttv/README b/Documentation/video4linux/bttv/README
index 7ca2154c2bf..3a367cdb664 100644
--- a/Documentation/video4linux/bttv/README
+++ b/Documentation/video4linux/bttv/README
@@ -63,8 +63,8 @@ If you have some knowledge and spare time, please try to fix this
 yourself (patches very welcome of course...)  You know: The linux
 slogan is "Do it yourself".
 
-There is a mailing list: video4linux-list@redhat.com.
-https://listman.redhat.com/mailman/listinfo/video4linux-list
+There is a mailing list: linux-media@vger.kernel.org
+http://vger.kernel.org/vger-lists.html#linux-media
 
 If you have trouble with some specific TV card, try to ask there
 instead of mailing me directly.  The chance that someone with the
diff --git a/Documentation/video4linux/cx2341x/README.hm12 b/Documentation/video4linux/cx2341x/README.hm12
index 0e213ed095e..b36148ea075 100644
--- a/Documentation/video4linux/cx2341x/README.hm12
+++ b/Documentation/video4linux/cx2341x/README.hm12
@@ -32,6 +32,10 @@ Y, U and V planes. This code assumes frames of 720x576 (PAL) pixels.
 The width of a frame is always 720 pixels, regardless of the actual specified
 width.
 
+If the height is not a multiple of 32 lines, then the captured video is
+missing macroblocks at the end and is unusable. So the height must be a
+multiple of 32.
+
 --------------------------------------------------------------------------
 
 #include <stdio.h>
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 1c58a763014..98529e03a46 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -32,6 +32,7 @@ spca561		041e:403b	Creative Webcam Vista (VF0010)
 zc3xx		041e:4051	Creative Live!Cam Notebook Pro (VF0250)
 ov519		041e:4052	Creative Live! VISTA IM
 zc3xx		041e:4053	Creative Live!Cam Video IM
+vc032x		041e:405b	Creative Live! Cam Notebook Ultra (VC0130)
 ov519		041e:405f	Creative Live! VISTA VF0330
 ov519		041e:4060	Creative Live! VISTA VF0350
 ov519		041e:4061	Creative Live! VISTA VF0400
@@ -193,6 +194,7 @@ spca500		084d:0003	D-Link DSC-350
 spca500		08ca:0103	Aiptek PocketDV
 sunplus		08ca:0104	Aiptek PocketDVII 1.3
 sunplus		08ca:0106	Aiptek Pocket DV3100+
+mr97310a	08ca:0111	Aiptek PenCam VGA+
 sunplus		08ca:2008	Aiptek Mini PenCam 2 M
 sunplus		08ca:2010	Aiptek PocketCam 3M
 sunplus		08ca:2016	Aiptek PocketCam 2 Mega
@@ -215,6 +217,7 @@ pac207		093a:2468	PAC207
 pac207		093a:2470	Genius GF112
 pac207		093a:2471	Genius VideoCam ge111
 pac207		093a:2472	Genius VideoCam ge110
+pac207		093a:2474	Genius iLook 111
 pac207		093a:2476	Genius e-Messenger 112
 pac7311		093a:2600	PAC7311 Typhoon
 pac7311		093a:2601	Philips SPC 610 NC
@@ -279,6 +282,7 @@ spca561		10fd:7e50	FlyCam Usb 100
 zc3xx		10fd:8050	Typhoon Webshot II USB 300k
 ov534		1415:2000	Sony HD Eye for PS3 (SLEH 00201)
 pac207		145f:013a	Trust WB-1300N
+vc032x		15b8:6001	HP 2.0 Megapixel
 vc032x		15b8:6002	HP 2.0 Megapixel rz406aa
 spca501		1776:501c	Arowana 300K CMOS Camera
 t613		17a1:0128	TASCORP JPEG Webcam, NGS Cyclops
diff --git a/Documentation/video4linux/pxa_camera.txt b/Documentation/video4linux/pxa_camera.txt
new file mode 100644
index 00000000000..b1137f9a53e
--- /dev/null
+++ b/Documentation/video4linux/pxa_camera.txt
@@ -0,0 +1,125 @@
+                              PXA-Camera Host Driver
+                              ======================
+
+Constraints
+-----------
+  a) Image size for YUV422P format
+     All YUV422P images are enforced to have width x height % 16 = 0.
+     This is due to DMA constraints, which transfers only planes of 8 byte
+     multiples.
+
+
+Global video workflow
+---------------------
+  a) QCI stopped
+     Initialy, the QCI interface is stopped.
+     When a buffer is queued (pxa_videobuf_ops->buf_queue), the QCI starts.
+
+  b) QCI started
+     More buffers can be queued while the QCI is started without halting the
+     capture.  The new buffers are "appended" at the tail of the DMA chain, and
+     smoothly captured one frame after the other.
+
+     Once a buffer is filled in the QCI interface, it is marked as "DONE" and
+     removed from the active buffers list. It can be then requeud or dequeued by
+     userland application.
+
+     Once the last buffer is filled in, the QCI interface stops.
+
+
+DMA usage
+---------
+  a) DMA flow
+     - first buffer queued for capture
+       Once a first buffer is queued for capture, the QCI is started, but data
+       transfer is not started. On "End Of Frame" interrupt, the irq handler
+       starts the DMA chain.
+     - capture of one videobuffer
+       The DMA chain starts transfering data into videobuffer RAM pages.
+       When all pages are transfered, the DMA irq is raised on "ENDINTR" status
+     - finishing one videobuffer
+       The DMA irq handler marks the videobuffer as "done", and removes it from
+       the active running queue
+       Meanwhile, the next videobuffer (if there is one), is transfered by DMA
+     - finishing the last videobuffer
+       On the DMA irq of the last videobuffer, the QCI is stopped.
+
+  b) DMA prepared buffer will have this structure
+
+     +------------+-----+---------------+-----------------+
+     | desc-sg[0] | ... | desc-sg[last] | finisher/linker |
+     +------------+-----+---------------+-----------------+
+
+     This structure is pointed by dma->sg_cpu.
+     The descriptors are used as follows :
+      - desc-sg[i]: i-th descriptor, transfering the i-th sg
+        element to the video buffer scatter gather
+      - finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN
+      - linker: has ddadr= desc-sg[0] of next video buffer, dcmd=0
+
+     For the next schema, let's assume d0=desc-sg[0] .. dN=desc-sg[N],
+     "f" stands for finisher and "l" for linker.
+     A typical running chain is :
+
+         Videobuffer 1         Videobuffer 2
+     +---------+----+---+  +----+----+----+---+
+     | d0 | .. | dN | l |  | d0 | .. | dN | f |
+     +---------+----+-|-+  ^----+----+----+---+
+                      |    |
+                      +----+
+
+     After the chaining is finished, the chain looks like :
+
+         Videobuffer 1         Videobuffer 2         Videobuffer 3
+     +---------+----+---+  +----+----+----+---+  +----+----+----+---+
+     | d0 | .. | dN | l |  | d0 | .. | dN | l |  | d0 | .. | dN | f |
+     +---------+----+-|-+  ^----+----+----+-|-+  ^----+----+----+---+
+                      |    |                |    |
+                      +----+                +----+
+                                           new_link
+
+  c) DMA hot chaining timeslice issue
+
+     As DMA chaining is done while DMA _is_ running, the linking may be done
+     while the DMA jumps from one Videobuffer to another. On the schema, that
+     would be a problem if the following sequence is encountered :
+
+      - DMA chain is Videobuffer1 + Videobuffer2
+      - pxa_videobuf_queue() is called to queue Videobuffer3
+      - DMA controller finishes Videobuffer2, and DMA stops
+      =>
+         Videobuffer 1         Videobuffer 2
+     +---------+----+---+  +----+----+----+---+
+     | d0 | .. | dN | l |  | d0 | .. | dN | f |
+     +---------+----+-|-+  ^----+----+----+-^-+
+                      |    |                |
+                      +----+                +-- DMA DDADR loads DDADR_STOP
+
+      - pxa_dma_add_tail_buf() is called, the Videobuffer2 "finisher" is
+        replaced by a "linker" to Videobuffer3 (creation of new_link)
+      - pxa_videobuf_queue() finishes
+      - the DMA irq handler is called, which terminates Videobuffer2
+      - Videobuffer3 capture is not scheduled on DMA chain (as it stopped !!!)
+
+         Videobuffer 1         Videobuffer 2         Videobuffer 3
+     +---------+----+---+  +----+----+----+---+  +----+----+----+---+
+     | d0 | .. | dN | l |  | d0 | .. | dN | l |  | d0 | .. | dN | f |
+     +---------+----+-|-+  ^----+----+----+-|-+  ^----+----+----+---+
+                      |    |                |    |
+                      +----+                +----+
+                                           new_link
+                                          DMA DDADR still is DDADR_STOP
+
+      - pxa_camera_check_link_miss() is called
+        This checks if the DMA is finished and a buffer is still on the
+        pcdev->capture list. If that's the case, the capture will be restarted,
+        and Videobuffer3 is scheduled on DMA chain.
+      - the DMA irq handler finishes
+
+     Note: if DMA stops just after pxa_camera_check_link_miss() reads DDADR()
+     value, we have the guarantee that the DMA irq handler will be called back
+     when the DMA will finish the buffer, and pxa_camera_check_link_miss() will
+     be called again, to reschedule Videobuffer3.
+
+--
+Author: Robert Jarzmik <robert.jarzmik@free.fr>
diff --git a/Documentation/video4linux/si470x.txt b/Documentation/video4linux/si470x.txt
index 49679e6aaa7..3a7823e01b4 100644
--- a/Documentation/video4linux/si470x.txt
+++ b/Documentation/video4linux/si470x.txt
@@ -1,6 +1,6 @@
 Driver for USB radios for the Silicon Labs Si470x FM Radio Receivers
 
-Copyright (c) 2008 Tobias Lorenz <tobias.lorenz@gmx.net>
+Copyright (c) 2009 Tobias Lorenz <tobias.lorenz@gmx.net>
 
 
 Information from Silicon Labs
@@ -41,7 +41,7 @@ chips are known to work:
 - 10c4:818a: Silicon Labs USB FM Radio Reference Design
 - 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF)
 - 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700)
-- 10c5:819a: DealExtreme USB Radio
+- 10c5:819a: Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear)
 
 
 Software
@@ -52,6 +52,7 @@ Testing is usually done with most application under Debian/testing:
 - gradio - GTK FM radio tuner
 - kradio - Comfortable Radio Application for KDE
 - radio - ncurses-based radio application
+- mplayer - The Ultimate Movie Player For Linux
 
 There is also a library libv4l, which can be used. It's going to have a function
 for frequency seeking, either by using hardware functionality as in radio-si470x
@@ -69,7 +70,7 @@ Audio Listing
 USB Audio is provided by the ALSA snd_usb_audio module. It is recommended to
 also select SND_USB_AUDIO, as this is required to get sound from the radio. For
 listing you have to redirect the sound, for example using one of the following
-commands.
+commands. Please adjust the audio devices to your needs (/dev/dsp* and hw:x,x).
 
 If you just want to test audio (very poor quality):
 cat /dev/dsp1 > /dev/dsp
@@ -80,6 +81,10 @@ sox -2 --endian little -r 96000 -t oss /dev/dsp1 -t oss /dev/dsp
 If you use arts try:
 arecord -D hw:1,0 -r96000 -c2 -f S16_LE | artsdsp aplay -B -
 
+If you use mplayer try:
+mplayer -radio adevice=hw=1.0:arate=96000 \
+	-rawaudio rate=96000 \
+	radio://<frequency>/capture
 
 Module Parameters
 =================
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index ff124374e9b..854808b67fa 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -47,7 +47,9 @@ All drivers have the following structure:
 3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX, /dev/radioX and
    /dev/vtxX) and keeping track of device-node specific data.
 
-4) Filehandle-specific structs containing per-filehandle data.
+4) Filehandle-specific structs containing per-filehandle data;
+
+5) video buffer handling.
 
 This is a rough schematic of how it all relates:
 
@@ -82,12 +84,20 @@ You must register the device instance:
 	v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev);
 
 Registration will initialize the v4l2_device struct and link dev->driver_data
-to v4l2_dev. Registration will also set v4l2_dev->name to a value derived from
-dev (driver name followed by the bus_id, to be precise). You may change the
-name after registration if you want.
+to v4l2_dev. If v4l2_dev->name is empty then it will be set to a value derived
+from dev (driver name followed by the bus_id, to be precise). If you set it
+up before calling v4l2_device_register then it will be untouched. If dev is
+NULL, then you *must* setup v4l2_dev->name before calling v4l2_device_register.
 
 The first 'dev' argument is normally the struct device pointer of a pci_dev,
-usb_device or platform_device.
+usb_interface or platform_device. It is rare for dev to be NULL, but it happens
+with ISA devices or when one device creates multiple PCI devices, thus making
+it impossible to associate v4l2_dev with a particular parent.
+
+You can also supply a notify() callback that can be called by sub-devices to
+notify you of events. Whether you need to set this depends on the sub-device.
+Any notifications a sub-device supports must be defined in a header in
+include/media/<subdevice>.h.
 
 You unregister with:
 
@@ -95,6 +105,17 @@ You unregister with:
 
 Unregistering will also automatically unregister all subdevs from the device.
 
+If you have a hotpluggable device (e.g. a USB device), then when a disconnect
+happens the parent device becomes invalid. Since v4l2_device has a pointer to
+that parent device it has to be cleared as well to mark that the parent is
+gone. To do this call:
+
+	v4l2_device_disconnect(struct v4l2_device *v4l2_dev);
+
+This does *not* unregister the subdevs, so you still need to call the
+v4l2_device_unregister() function for that. If your driver is not hotpluggable,
+then there is no need to call v4l2_device_disconnect().
+
 Sometimes you need to iterate over all devices registered by a specific
 driver. This is usually the case if multiple device drivers use the same
 hardware. E.g. the ivtvfb driver is a framebuffer driver that uses the ivtv
@@ -134,7 +155,7 @@ The recommended approach is as follows:
 
 static atomic_t drv_instance = ATOMIC_INIT(0);
 
-static int __devinit drv_probe(struct pci_dev *dev,
+static int __devinit drv_probe(struct pci_dev *pdev,
 				const struct pci_device_id *pci_id)
 {
 	...
@@ -218,7 +239,7 @@ to add new ops and categories.
 
 A sub-device driver initializes the v4l2_subdev struct using:
 
-	v4l2_subdev_init(subdev, &ops);
+	v4l2_subdev_init(sd, &ops);
 
 Afterwards you need to initialize subdev->name with a unique name and set the
 module owner. This is done for you if you use the i2c helper functions.
@@ -226,7 +247,7 @@ module owner. This is done for you if you use the i2c helper functions.
 A device (bridge) driver needs to register the v4l2_subdev with the
 v4l2_device:
 
-	int err = v4l2_device_register_subdev(device, subdev);
+	int err = v4l2_device_register_subdev(v4l2_dev, sd);
 
 This can fail if the subdev module disappeared before it could be registered.
 After this function was called successfully the subdev->dev field points to
@@ -234,17 +255,17 @@ the v4l2_device.
 
 You can unregister a sub-device using:
 
-	v4l2_device_unregister_subdev(subdev);
+	v4l2_device_unregister_subdev(sd);
 
-Afterwards the subdev module can be unloaded and subdev->dev == NULL.
+Afterwards the subdev module can be unloaded and sd->dev == NULL.
 
 You can call an ops function either directly:
 
-	err = subdev->ops->core->g_chip_ident(subdev, &chip);
+	err = sd->ops->core->g_chip_ident(sd, &chip);
 
 but it is better and easier to use this macro:
 
-	err = v4l2_subdev_call(subdev, core, g_chip_ident, &chip);
+	err = v4l2_subdev_call(sd, core, g_chip_ident, &chip);
 
 The macro will to the right NULL pointer checks and returns -ENODEV if subdev
 is NULL, -ENOIOCTLCMD if either subdev->core or subdev->core->g_chip_ident is
@@ -252,19 +273,19 @@ NULL, or the actual result of the subdev->ops->core->g_chip_ident ops.
 
 It is also possible to call all or a subset of the sub-devices:
 
-	v4l2_device_call_all(dev, 0, core, g_chip_ident, &chip);
+	v4l2_device_call_all(v4l2_dev, 0, core, g_chip_ident, &chip);
 
 Any subdev that does not support this ops is skipped and error results are
 ignored. If you want to check for errors use this:
 
-	err = v4l2_device_call_until_err(dev, 0, core, g_chip_ident, &chip);
+	err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_chip_ident, &chip);
 
 Any error except -ENOIOCTLCMD will exit the loop with that error. If no
 errors (except -ENOIOCTLCMD) occured, then 0 is returned.
 
 The second argument to both calls is a group ID. If 0, then all subdevs are
 called. If non-zero, then only those whose group ID match that value will
-be called. Before a bridge driver registers a subdev it can set subdev->grp_id
+be called. Before a bridge driver registers a subdev it can set sd->grp_id
 to whatever value it wants (it's 0 by default). This value is owned by the
 bridge driver and the sub-device driver will never modify or use it.
 
@@ -276,6 +297,11 @@ e.g. AUDIO_CONTROLLER and specify that as the group ID value when calling
 v4l2_device_call_all(). That ensures that it will only go to the subdev
 that needs it.
 
+If the sub-device needs to notify its v4l2_device parent of an event, then
+it can call v4l2_subdev_notify(sd, notification, arg). This macro checks
+whether there is a notify() callback defined and returns -ENODEV if not.
+Otherwise the result of the notify() call is returned.
+
 The advantage of using v4l2_subdev is that it is a generic struct and does
 not contain any knowledge about the underlying hardware. So a driver might
 contain several subdevs that use an I2C bus, but also a subdev that is
@@ -325,32 +351,25 @@ And this to go from an i2c_client to a v4l2_subdev struct:
 
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 
-Finally you need to make a command function to make driver->command()
-call the right subdev_ops functions:
-
-static int subdev_command(struct i2c_client *client, unsigned cmd, void *arg)
-{
-	return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg);
-}
-
-If driver->command is never used then you can leave this out. Eventually the
-driver->command usage should be removed from v4l.
-
 Make sure to call v4l2_device_unregister_subdev(sd) when the remove() callback
 is called. This will unregister the sub-device from the bridge driver. It is
 safe to call this even if the sub-device was never registered.
 
+You need to do this because when the bridge driver destroys the i2c adapter
+the remove() callbacks are called of the i2c devices on that adapter.
+After that the corresponding v4l2_subdev structures are invalid, so they
+have to be unregistered first. Calling v4l2_device_unregister_subdev(sd)
+from the remove() callback ensures that this is always done correctly.
+
 
 The bridge driver also has some helper functions it can use:
 
-struct v4l2_subdev *sd = v4l2_i2c_new_subdev(adapter, "module_foo", "chipid", 0x36);
+struct v4l2_subdev *sd = v4l2_i2c_new_subdev(v4l2_dev, adapter,
+	       "module_foo", "chipid", 0x36);
 
 This loads the given module (can be NULL if no module needs to be loaded) and
 calls i2c_new_device() with the given i2c_adapter and chip/address arguments.
-If all goes well, then it registers the subdev with the v4l2_device. It gets
-the v4l2_device by calling i2c_get_adapdata(adapter), so you should make sure
-that adapdata is set to v4l2_device when you setup the i2c_adapter in your
-driver.
+If all goes well, then it registers the subdev with the v4l2_device.
 
 You can also use v4l2_i2c_new_probed_subdev() which is very similar to
 v4l2_i2c_new_subdev(), except that it has an array of possible I2C addresses
@@ -358,6 +377,14 @@ that it should probe. Internally it calls i2c_new_probed_device().
 
 Both functions return NULL if something went wrong.
 
+Note that the chipid you pass to v4l2_i2c_new_(probed_)subdev() is usually
+the same as the module name. It allows you to specify a chip variant, e.g.
+"saa7114" or "saa7115". In general though the i2c driver autodetects this.
+The use of chipid is something that needs to be looked at more closely at a
+later date. It differs between i2c drivers and as such can be confusing.
+To see which chip variants are supported you can look in the i2c driver code
+for the i2c_device_id table. This lists all the possibilities.
+
 
 struct video_device
 -------------------
@@ -396,6 +423,15 @@ You should also set these fields:
 - ioctl_ops: if you use the v4l2_ioctl_ops to simplify ioctl maintenance
   (highly recommended to use this and it might become compulsory in the
   future!), then set this to your v4l2_ioctl_ops struct.
+- parent: you only set this if v4l2_device was registered with NULL as
+  the parent device struct. This only happens in cases where one hardware
+  device has multiple PCI devices that all share the same v4l2_device core.
+
+  The cx88 driver is an example of this: one core v4l2_device struct, but
+  it is used by both an raw video PCI device (cx8800) and a MPEG PCI device
+  (cx8802). Since the v4l2_device cannot be associated with a particular
+  PCI device it is setup without a parent device. But when the struct
+  video_device is setup you do know which parent PCI device to use.
 
 If you use v4l2_ioctl_ops, then you should set either .unlocked_ioctl or
 .ioctl to video_ioctl2 in your v4l2_file_operations struct.
@@ -499,8 +535,8 @@ There are a few useful helper functions:
 
 You can set/get driver private data in the video_device struct using:
 
-void *video_get_drvdata(struct video_device *dev);
-void video_set_drvdata(struct video_device *dev, void *data);
+void *video_get_drvdata(struct video_device *vdev);
+void video_set_drvdata(struct video_device *vdev, void *data);
 
 Note that you can safely call video_set_drvdata() before calling
 video_register_device().
@@ -519,3 +555,103 @@ void *video_drvdata(struct file *file);
 You can go from a video_device struct to the v4l2_device struct using:
 
 struct v4l2_device *v4l2_dev = vdev->v4l2_dev;
+
+video buffer helper functions
+-----------------------------
+
+The v4l2 core API provides a standard method for dealing with video
+buffers. Those methods allow a driver to implement read(), mmap() and
+overlay() on a consistent way.
+
+There are currently methods for using video buffers on devices that
+supports DMA with scatter/gather method (videobuf-dma-sg), DMA with
+linear access (videobuf-dma-contig), and vmalloced buffers, mostly
+used on USB drivers (videobuf-vmalloc).
+
+Any driver using videobuf should provide operations (callbacks) for
+four handlers:
+
+ops->buf_setup   - calculates the size of the video buffers and avoid they
+		   to waste more than some maximum limit of RAM;
+ops->buf_prepare - fills the video buffer structs and calls
+		   videobuf_iolock() to alloc and prepare mmaped memory;
+ops->buf_queue   - advices the driver that another buffer were
+		   requested (by read() or by QBUF);
+ops->buf_release - frees any buffer that were allocated.
+
+In order to use it, the driver need to have a code (generally called at
+interrupt context) that will properly handle the buffer request lists,
+announcing that a new buffer were filled.
+
+The irq handling code should handle the videobuf task lists, in order
+to advice videobuf that a new frame were filled, in order to honor to a
+request. The code is generally like this one:
+	if (list_empty(&dma_q->active))
+		return;
+
+	buf = list_entry(dma_q->active.next, struct vbuffer, vb.queue);
+
+	if (!waitqueue_active(&buf->vb.done))
+		return;
+
+	/* Some logic to handle the buf may be needed here */
+
+	list_del(&buf->vb.queue);
+	do_gettimeofday(&buf->vb.ts);
+	wake_up(&buf->vb.done);
+
+Those are the videobuffer functions used on drivers, implemented on
+videobuf-core:
+
+- Videobuf init functions
+  videobuf_queue_sg_init()
+      Initializes the videobuf infrastructure. This function should be
+      called before any other videobuf function on drivers that uses DMA
+      Scatter/Gather buffers.
+
+  videobuf_queue_dma_contig_init
+      Initializes the videobuf infrastructure. This function should be
+      called before any other videobuf function on drivers that need DMA
+      contiguous buffers.
+
+  videobuf_queue_vmalloc_init()
+      Initializes the videobuf infrastructure. This function should be
+      called before any other videobuf function on USB (and other drivers)
+      that need a vmalloced type of videobuf.
+
+- videobuf_iolock()
+  Prepares the videobuf memory for the proper method (read, mmap, overlay).
+
+- videobuf_queue_is_busy()
+  Checks if a videobuf is streaming.
+
+- videobuf_queue_cancel()
+  Stops video handling.
+
+- videobuf_mmap_free()
+  frees mmap buffers.
+
+- videobuf_stop()
+  Stops video handling, ends mmap and frees mmap and other buffers.
+
+- V4L2 api functions. Those functions correspond to VIDIOC_foo ioctls:
+   videobuf_reqbufs(), videobuf_querybuf(), videobuf_qbuf(),
+   videobuf_dqbuf(), videobuf_streamon(), videobuf_streamoff().
+
+- V4L1 api function (corresponds to VIDIOCMBUF ioctl):
+   videobuf_cgmbuf()
+      This function is used to provide backward compatibility with V4L1
+      API.
+
+- Some help functions for read()/poll() operations:
+   videobuf_read_stream()
+      For continuous stream read()
+   videobuf_read_one()
+      For snapshot read()
+   videobuf_poll_stream()
+      polling help function
+
+The better way to understand it is to take a look at vivi driver. One
+of the main reasons for vivi is to be a videobuf usage example. the
+vivi_thread_tick() does the task that the IRQ callback would do on PCI
+drivers (or the irq callback on USB).
diff --git a/Documentation/video4linux/v4lgrab.c b/Documentation/video4linux/v4lgrab.c
index d6e70bef8ad..05769cff100 100644
--- a/Documentation/video4linux/v4lgrab.c
+++ b/Documentation/video4linux/v4lgrab.c
@@ -105,8 +105,8 @@ int main(int argc, char ** argv)
   struct video_picture vpic;
 
   unsigned char *buffer, *src;
-  int bpp = 24, r, g, b;
-  unsigned int i, src_depth;
+  int bpp = 24, r = 0, g = 0, b = 0;
+  unsigned int i, src_depth = 16;
 
   if (fd < 0) {
     perror(VIDEO_DEV);
diff --git a/Documentation/video4linux/zr364xx.txt b/Documentation/video4linux/zr364xx.txt
index 5c81e3ae645..7f3d1955d21 100644
--- a/Documentation/video4linux/zr364xx.txt
+++ b/Documentation/video4linux/zr364xx.txt
@@ -65,3 +65,4 @@ Vendor  Product  Distributor     Model
 0x06d6  0x003b   Trust           Powerc@m 970Z
 0x0a17  0x004e   Pentax          Optio 50
 0x041e  0x405d   Creative        DiVi CAM 516
+0x08ca  0x2102   Aiptek          DV T300
diff --git a/Documentation/vm/kmemtrace.txt b/Documentation/vm/kmemtrace.txt
new file mode 100644
index 00000000000..a956d9b7f94
--- /dev/null
+++ b/Documentation/vm/kmemtrace.txt
@@ -0,0 +1,126 @@
+			kmemtrace - Kernel Memory Tracer
+
+			  by Eduard - Gabriel Munteanu
+			     <eduard.munteanu@linux360.ro>
+
+I. Introduction
+===============
+
+kmemtrace helps kernel developers figure out two things:
+1) how different allocators (SLAB, SLUB etc.) perform
+2) how kernel code allocates memory and how much
+
+To do this, we trace every allocation and export information to the userspace
+through the relay interface. We export things such as the number of requested
+bytes, the number of bytes actually allocated (i.e. including internal
+fragmentation), whether this is a slab allocation or a plain kmalloc() and so
+on.
+
+The actual analysis is performed by a userspace tool (see section III for
+details on where to get it from). It logs the data exported by the kernel,
+processes it and (as of writing this) can provide the following information:
+- the total amount of memory allocated and fragmentation per call-site
+- the amount of memory allocated and fragmentation per allocation
+- total memory allocated and fragmentation in the collected dataset
+- number of cross-CPU allocation and frees (makes sense in NUMA environments)
+
+Moreover, it can potentially find inconsistent and erroneous behavior in
+kernel code, such as using slab free functions on kmalloc'ed memory or
+allocating less memory than requested (but not truly failed allocations).
+
+kmemtrace also makes provisions for tracing on some arch and analysing the
+data on another.
+
+II. Design and goals
+====================
+
+kmemtrace was designed to handle rather large amounts of data. Thus, it uses
+the relay interface to export whatever is logged to userspace, which then
+stores it. Analysis and reporting is done asynchronously, that is, after the
+data is collected and stored. By design, it allows one to log and analyse
+on different machines and different arches.
+
+As of writing this, the ABI is not considered stable, though it might not
+change much. However, no guarantees are made about compatibility yet. When
+deemed stable, the ABI should still allow easy extension while maintaining
+backward compatibility. This is described further in Documentation/ABI.
+
+Summary of design goals:
+	- allow logging and analysis to be done across different machines
+	- be fast and anticipate usage in high-load environments (*)
+	- be reasonably extensible
+	- make it possible for GNU/Linux distributions to have kmemtrace
+	included in their repositories
+
+(*) - one of the reasons Pekka Enberg's original userspace data analysis
+    tool's code was rewritten from Perl to C (although this is more than a
+    simple conversion)
+
+
+III. Quick usage guide
+======================
+
+1) Get a kernel that supports kmemtrace and build it accordingly (i.e. enable
+CONFIG_KMEMTRACE).
+
+2) Get the userspace tool and build it:
+$ git-clone git://repo.or.cz/kmemtrace-user.git		# current repository
+$ cd kmemtrace-user/
+$ ./autogen.sh
+$ ./configure
+$ make
+
+3) Boot the kmemtrace-enabled kernel if you haven't, preferably in the
+'single' runlevel (so that relay buffers don't fill up easily), and run
+kmemtrace:
+# '$' does not mean user, but root here.
+$ mount -t debugfs none /sys/kernel/debug
+$ mount -t proc none /proc
+$ cd path/to/kmemtrace-user/
+$ ./kmemtraced
+Wait a bit, then stop it with CTRL+C.
+$ cat /sys/kernel/debug/kmemtrace/total_overruns	# Check if we didn't
+							# overrun, should
+							# be zero.
+$ (Optionally) [Run kmemtrace_check separately on each cpu[0-9]*.out file to
+		check its correctness]
+$ ./kmemtrace-report
+
+Now you should have a nice and short summary of how the allocator performs.
+
+IV. FAQ and known issues
+========================
+
+Q: 'cat /sys/kernel/debug/kmemtrace/total_overruns' is non-zero, how do I fix
+this? Should I worry?
+A: If it's non-zero, this affects kmemtrace's accuracy, depending on how
+large the number is. You can fix it by supplying a higher
+'kmemtrace.subbufs=N' kernel parameter.
+---
+
+Q: kmemtrace_check reports errors, how do I fix this? Should I worry?
+A: This is a bug and should be reported. It can occur for a variety of
+reasons:
+	- possible bugs in relay code
+	- possible misuse of relay by kmemtrace
+	- timestamps being collected unorderly
+Or you may fix it yourself and send us a patch.
+---
+
+Q: kmemtrace_report shows many errors, how do I fix this? Should I worry?
+A: This is a known issue and I'm working on it. These might be true errors
+in kernel code, which may have inconsistent behavior (e.g. allocating memory
+with kmem_cache_alloc() and freeing it with kfree()). Pekka Enberg pointed
+out this behavior may work with SLAB, but may fail with other allocators.
+
+It may also be due to lack of tracing in some unusual allocator functions.
+
+We don't want bug reports regarding this issue yet.
+---
+
+V. See also
+===========
+
+Documentation/kernel-parameters.txt
+Documentation/ABI/testing/debugfs-kmemtrace
+
diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt
index 6aaaeb38730..be45dbb9d7f 100644
--- a/Documentation/vm/numa_memory_policy.txt
+++ b/Documentation/vm/numa_memory_policy.txt
@@ -8,7 +8,8 @@ The current memory policy support was added to Linux 2.6 around May 2004.  This
 document attempts to describe the concepts and APIs of the 2.6 memory policy
 support.
 
-Memory policies should not be confused with cpusets (Documentation/cpusets.txt)
+Memory policies should not be confused with cpusets
+(Documentation/cgroups/cpusets.txt)
 which is an administrative mechanism for restricting the nodes from which
 memory may be allocated by a set of processes. Memory policies are a
 programming interface that a NUMA-aware application can take advantage of.  When
diff --git a/Documentation/vm/page_migration b/Documentation/vm/page_migration
index d5fdfd34bba..6513fe2d90b 100644
--- a/Documentation/vm/page_migration
+++ b/Documentation/vm/page_migration
@@ -37,7 +37,8 @@ locations.
 
 Larger installations usually partition the system using cpusets into
 sections of nodes. Paul Jackson has equipped cpusets with the ability to
-move pages when a task is moved to another cpuset (See ../cpusets.txt).
+move pages when a task is moved to another cpuset (See
+Documentation/cgroups/cpusets.txt).
 Cpusets allows the automation of process locality. If a task is moved to
 a new cpuset then also all its pages are moved with it so that the
 performance of the process does not sink dramatically. Also the pages
diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
index 7b4596ac412..e0203662f9e 100644
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@@ -158,7 +158,7 @@ Offset	Proto	Name		Meaning
 0202/4	2.00+	header		Magic signature "HdrS"
 0206/2	2.00+	version		Boot protocol version supported
 0208/4	2.00+	realmode_swtch	Boot loader hook (see below)
-020C/2	2.00+	start_sys	The load-low segment (0x1000) (obsolete)
+020C/2	2.00+	start_sys_seg	The load-low segment (0x1000) (obsolete)
 020E/2	2.00+	kernel_version	Pointer to kernel version string
 0210/1	2.00+	type_of_loader	Boot loader identifier
 0211/1	2.00+	loadflags	Boot protocol option flags
@@ -170,10 +170,11 @@ Offset	Proto	Name		Meaning
 0224/2	2.01+	heap_end_ptr	Free memory after setup end
 0226/2	N/A	pad1		Unused
 0228/4	2.02+	cmd_line_ptr	32-bit pointer to the kernel command line
-022C/4	2.03+	initrd_addr_max	Highest legal initrd address
+022C/4	2.03+	ramdisk_max	Highest legal initrd address
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
-0235/3	N/A	pad2		Unused
+0235/1	N/A	pad2		Unused
+0236/2	N/A	pad3		Unused
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
 023C/4	2.07+	hardware_subarch Hardware subarchitecture
 0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
@@ -299,14 +300,14 @@ Protocol:	2.00+
   e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
   10.17.
 
-Field name:	readmode_swtch
+Field name:	realmode_swtch
 Type:		modify (optional)
 Offset/size:	0x208/4
 Protocol:	2.00+
 
   Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
 
-Field name:	start_sys
+Field name:	start_sys_seg
 Type:		read
 Offset/size:	0x20c/2
 Protocol:	2.00+
@@ -468,7 +469,7 @@ Protocol:	2.02+
   zero, the kernel will assume that your boot loader does not support
   the 2.02+ protocol.
 
-Field name:	initrd_addr_max
+Field name:	ramdisk_max
 Type:		read
 Offset/size:	0x22c/4
 Protocol:	2.03+
@@ -542,7 +543,10 @@ Protocol:	2.08+
 
   The payload may be compressed. The format of both the compressed and
   uncompressed data should be determined using the standard magic
-  numbers. Currently only gzip compressed ELF is used.
+  numbers.  The currently supported compression formats are gzip
+  (magic numbers 1F 8B or 1F 9E), bzip2 (magic number 42 5A) and LZMA
+  (magic number 5D 00).  The uncompressed payload is currently always ELF
+  (magic number 7F 45 4C 46).
   
 Field name:	payload_length
 Type:		read
diff --git a/Documentation/x86/earlyprintk.txt b/Documentation/x86/earlyprintk.txt
new file mode 100644
index 00000000000..607b1a01606
--- /dev/null
+++ b/Documentation/x86/earlyprintk.txt
@@ -0,0 +1,101 @@
+
+Mini-HOWTO for using the earlyprintk=dbgp boot option with a
+USB2 Debug port key and a debug cable, on x86 systems.
+
+You need two computers, the 'USB debug key' special gadget and
+and two USB cables, connected like this:
+
+  [host/target] <-------> [USB debug key] <-------> [client/console]
+
+1. There are three specific hardware requirements:
+
+ a.) Host/target system needs to have USB debug port capability.
+
+ You can check this capability by looking at a 'Debug port' bit in
+ the lspci -vvv output:
+
+ # lspci -vvv
+ ...
+ 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
+         Subsystem: Lenovo ThinkPad T61
+         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
+         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+         Latency: 0
+         Interrupt: pin D routed to IRQ 19
+         Region 0: Memory at fe227000 (32-bit, non-prefetchable) [size=1K]
+         Capabilities: [50] Power Management version 2
+                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+                 Status: D0 PME-Enable- DSel=0 DScale=0 PME+
+         Capabilities: [58] Debug port: BAR=1 offset=00a0
+                            ^^^^^^^^^^^ <==================== [ HERE ]
+	 Kernel driver in use: ehci_hcd
+         Kernel modules: ehci-hcd
+ ...
+
+( If your system does not list a debug port capability then you probably
+  wont be able to use the USB debug key. )
+
+ b.) You also need a Netchip USB debug cable/key:
+
+        http://www.plxtech.com/products/NET2000/NET20DC/default.asp
+
+     This is a small blue plastic connector with two USB connections,
+     it draws power from its USB connections.
+
+ c.) Thirdly, you need a second client/console system with a regular USB port.
+
+2. Software requirements:
+
+ a.) On the host/target system:
+
+    You need to enable the following kernel config option:
+
+      CONFIG_EARLY_PRINTK_DBGP=y
+
+    And you need to add the boot command line: "earlyprintk=dbgp".
+    (If you are using Grub, append it to the 'kernel' line in
+     /etc/grub.conf)
+
+    NOTE: normally earlyprintk console gets turned off once the
+    regular console is alive - use "earlyprintk=dbgp,keep" to keep
+    this channel open beyond early bootup. This can be useful for
+    debugging crashes under Xorg, etc.
+
+ b.) On the client/console system:
+
+    You should enable the following kernel config option:
+
+      CONFIG_USB_SERIAL_DEBUG=y
+
+    On the next bootup with the modified kernel you should
+    get a /dev/ttyUSBx device(s).
+
+    Now this channel of kernel messages is ready to be used: start
+    your favorite terminal emulator (minicom, etc.) and set
+    it up to use /dev/ttyUSB0 - or use a raw 'cat /dev/ttyUSBx' to
+    see the raw output.
+
+ c.) On Nvidia Southbridge based systems: the kernel will try to probe
+     and find out which port has debug device connected.
+
+3. Testing that it works fine:
+
+   You can test the output by using earlyprintk=dbgp,keep and provoking
+   kernel messages on the host/target system. You can provoke a harmless
+   kernel message by for example doing:
+
+     echo h > /proc/sysrq-trigger
+
+   On the host/target system you should see this help line in "dmesg" output:
+
+     SysRq : HELP : loglevel(0-9) reBoot Crashdump terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
+
+   On the client/console system do:
+
+       cat /dev/ttyUSB0
+
+   And you should see the help line above displayed shortly after you've
+   provoked it on the host system.
+
+If it does not work then please ask about it on the linux-kernel@vger.kernel.org
+mailing list or contact the x86 maintainers.
diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets b/Documentation/x86/x86_64/fake-numa-for-cpusets
index 33bb5665599..0f11d9becb0 100644
--- a/Documentation/x86/x86_64/fake-numa-for-cpusets
+++ b/Documentation/x86/x86_64/fake-numa-for-cpusets
@@ -7,7 +7,8 @@ you can create fake NUMA nodes that represent contiguous chunks of memory and
 assign them to cpusets and their attached tasks.  This is a way of limiting the
 amount of system memory that are available to a certain class of tasks.
 
-For more information on the features of cpusets, see Documentation/cpusets.txt.
+For more information on the features of cpusets, see
+Documentation/cgroups/cpusets.txt.
 There are a number of different configurations you can use for your needs.  For
 more information on the numa=fake command line option and its various ways of
 configuring fake nodes, see Documentation/x86/x86_64/boot-options.txt.
@@ -32,7 +33,7 @@ A machine may be split as follows with "numa=fake=4*512," as reported by dmesg:
 	On node 3 totalpages: 131072
 
 Now following the instructions for mounting the cpusets filesystem from
-Documentation/cpusets.txt, you can assign fake nodes (i.e. contiguous memory
+Documentation/cgroups/cpusets.txt, you can assign fake nodes (i.e. contiguous memory
 address spaces) to individual cpusets:
 
 	[root@xroads /]# mkdir exampleset