Merge tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux

Pull fbdev changes from Tomi Valkeinen:
 "OMAPDSS changes, including:
   - use dynanic debug prints
   - OMAP platform dependency removals
   - Creation of compat-layer, helping us to improve omapdrm
   - Misc cleanups, aiming to make omadss more in line with the upcoming
     common display framework

  Exynos DP changes for the 3.8 merge window:
   - Device Tree support for Samsung Exynos DP
   - SW Link training is cleaned up.
   - HPD interrupt is supported.

  Samsung Framebuffer changes for the 3.8 merge window:
   - The bit definitions of header file are updated.
   - Some minor typos are fixed.
   - Some minor bugs of s3c_fb_check_var() are fixed.

  FB related changes for SH Mobile, Freescale DIU

  Add support for the Solomon SSD1307 OLED Controller"

* tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux: (191 commits)
  OMAPDSS: fix TV-out issue with DSI PLL
  Revert "OMAPFB: simplify locking"
  OMAPFB: remove silly loop in fb2display()
  OMAPFB: fix error handling in omapfb_find_best_mode()
  OMAPFB: use devm_kzalloc to allocate omapfb2_device
  OMAPDSS: DISPC: remove dispc fck uses
  OMAPDSS: DISPC: get dss clock rate from dss driver
  drivers/video/console/softcursor.c: remove redundant NULL check before kfree()
  drivers/video: add support for the Solomon SSD1307 OLED Controller
  OMAPDSS: use omapdss_compat_init() in other drivers
  OMAPDSS: export dispc functions
  OMAPDSS: export dss_feat functions
  OMAPDSS: export dss_mgr_ops functions
  OMAPDSS: separate compat files in the Makefile
  OMAPDSS: move display sysfs init to compat layer
  OMAPDSS: DPI: use dispc's check_timings
  OMAPDSS: DISPC: add dispc_ovl_check()
  OMAPDSS: move irq handling to dispc-compat
  OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c
  OMAPDSS: move blocking mgr enable/disable to compat layer
  ...

Conflicts:
	arch/arm/mach-davinci/devices-da8xx.c
	arch/arm/plat-omap/common.c
	drivers/media/platform/omap/omap_vout.c

3 files changed, 108 insertions, 6 deletions

diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS
index a564ceea9e9..4484e021290 100644
--- a/Documentation/arm/OMAP/DSS
+++ b/Documentation/arm/OMAP/DSS
@@ -285,7 +285,10 @@ FB0 +-- GFX  ---- LCD ---- LCD
 Misc notes
 ----------
 
-OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator.
+OMAP FB allocates the framebuffer memory using the standard dma allocator. You
+can enable Contiguous Memory Allocator (CONFIG_CMA) to improve the dma
+allocator, and if CMA is enabled, you use "cma=" kernel parameter to increase
+the global memory area for CMA.
 
 Using DSI DPLL to generate pixel clock it is possible produce the pixel clock
 of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI.
@@ -301,11 +304,6 @@ framebuffer parameters.
 Kernel boot arguments
 ---------------------
 
-vram=<size>[,<physaddr>]
-	- Amount of total VRAM to preallocate and optionally a physical start
-	  memory address. For example, "10M". omapfb allocates memory for
-	  framebuffers from VRAM.
-
 omapfb.mode=<display>:<mode>[,...]
 	- Default video mode for specified displays. For example,
 	  "dvi:800x400MR-24@60".  See drivers/video/modedb.c.
diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
new file mode 100644
index 00000000000..c60da67a5d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -0,0 +1,80 @@
+The Exynos display port interface should be configured based on
+the type of panel connected to it.
+
+We use two nodes:
+	-dp-controller node
+	-dptx-phy node(defined inside dp-controller node)
+
+For the DP-PHY initialization, we use the dptx-phy node.
+Required properties for dptx-phy:
+	-reg:
+		Base address of DP PHY register.
+	-samsung,enable-mask:
+		The bit-mask used to enable/disable DP PHY.
+
+For the Panel initialization, we read data from dp-controller node.
+Required properties for dp-controller:
+	-compatible:
+		should be "samsung,exynos5-dp".
+	-reg:
+		physical base address of the controller and length
+		of memory mapped region.
+	-interrupts:
+		interrupt combiner values.
+	-interrupt-parent:
+		phandle to Interrupt combiner node.
+	-samsung,color-space:
+		input video data format.
+			COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
+	-samsung,dynamic-range:
+		dynamic range for input video data.
+			VESA = 0, CEA = 1
+	-samsung,ycbcr-coeff:
+		YCbCr co-efficients for input video.
+			COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
+	-samsung,color-depth:
+		number of bits per colour component.
+			COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
+	-samsung,link-rate:
+		link rate supported by the panel.
+			LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
+	-samsung,lane-count:
+		number of lanes supported by the panel.
+			LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
+
+Optional properties for dp-controller:
+	-interlaced:
+		interlace scan mode.
+			Progressive if defined, Interlaced if not defined
+	-vsync-active-high:
+		VSYNC polarity configuration.
+			High if defined, Low if not defined
+	-hsync-active-high:
+		HSYNC polarity configuration.
+			High if defined, Low if not defined
+
+Example:
+
+SOC specific portion:
+	dp-controller {
+		compatible = "samsung,exynos5-dp";
+		reg = <0x145b0000 0x10000>;
+		interrupts = <10 3>;
+		interrupt-parent = <&combiner>;
+
+		dptx-phy {
+			reg = <0x10040720>;
+			samsung,enable-mask = <1>;
+		};
+
+	};
+
+Board Specific portion:
+	dp-controller {
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+		samsung,link-rate = <0x0a>;
+		samsung,lane-count = <4>;
+	};
diff --git a/Documentation/devicetree/bindings/video/ssd1307fb.txt b/Documentation/devicetree/bindings/video/ssd1307fb.txt
new file mode 100644
index 00000000000..3d0060cff06
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ssd1307fb.txt
@@ -0,0 +1,24 @@
+* Solomon SSD1307 Framebuffer Driver
+
+Required properties:
+  - compatible: Should be "solomon,ssd1307fb-<bus>". The only supported bus for
+    now is i2c.
+  - reg: Should contain address of the controller on the I2C bus. Most likely
+         0x3c or 0x3d
+  - pwm: Should contain the pwm to use according to the OF device tree PWM
+         specification [0]
+  - reset-gpios: Should contain the GPIO used to reset the OLED display
+
+Optional properties:
+  - reset-active-low: Is the reset gpio is active on physical low?
+
+[0]: Documentation/devicetree/bindings/pwm/pwm.txt
+
+Examples:
+ssd1307: oled@3c {
+        compatible = "solomon,ssd1307fb-i2c";
+        reg = <0x3c>;
+        pwms = <&pwm 4 3000>;
+        reset-gpios = <&gpio2 7>;
+        reset-active-low;
+};