Merge tag 'usb-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.13

Final conversions to configfs for mass storage, acm_ms, and
multi gadgets.

MUSB should now work out of the box on AM335x-based boards
(beagle bone white and black) with DMA thanks to Sebastian's
work.

We can now enable VERBOSE_DEBUG on builds of drivers/usb/gadget/
by selecting CONFIG_USB_GADGET_VERBOSE.

s3c-hsotg got quite a few non-critical fixes but also learned
a few new tricks (isochronous transfers, multi count support).

The Marvel USB3 Controller driver got a memory leak fix.

devm_usb_get_phy() learned not to return NULL, ever.

Other than these patches, we have the usual set of cleanups
ranging from removal of unnecessary *_set_drvdata() to using
SIMPLE_DEV_PM_OPS.

Signed-of-by: Felipe Balbi <balbi@ti.com>

2 files changed, 34 insertions, 4 deletions

diff --git a/Documentation/ABI/testing/configfs-usb-gadget-mass-storage b/Documentation/ABI/testing/configfs-usb-gadget-mass-storage
new file mode 100644
index 00000000000..ad72a37ee9f
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-mass-storage
@@ -0,0 +1,31 @@
+What:		/config/usb-gadget/gadget/functions/mass_storage.name
+Date:		Oct 2013
+KenelVersion:	3.13
+Description:
+		The attributes:
+
+		stall		- Set to permit function to halt bulk endpoints.
+				Disabled on some USB devices known not to work
+				correctly. You should set it to true.
+		num_buffers	- Number of pipeline buffers. Valid numbers
+				are 2..4. Available only if
+				CONFIG_USB_GADGET_DEBUG_FILES is set.
+
+What:		/config/usb-gadget/gadget/functions/mass_storage.name/lun.name
+Date:		Oct 2013
+KenelVersion:	3.13
+Description:
+		The attributes:
+
+		file		- The path to the backing file for the LUN.
+				Required if LUN is not marked as removable.
+		ro		- Flag specifying access to the LUN shall be
+				read-only. This is implied if CD-ROM emulation
+				is enabled as well as when it was impossible
+				to open "filename" in R/W mode.
+		removable	- Flag specifying that LUN shall be indicated as
+				being removable.
+		cdrom		- Flag specifying that LUN shall be reported as
+				being a CD-ROM.
+		nofua		- Flag specifying that FUA flag
+				in SCSI WRITE(10,12)
diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
index d7e272671c7..1bd37faba05 100644
--- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
+++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
@@ -15,7 +15,7 @@ Optional properties:
 
 - vcc-supply: phandle to the regulator that provides RESET to the PHY.
 
-- reset-supply: phandle to the regulator that provides power to the PHY.
+- reset-gpios: Should specify the GPIO for reset.
 
 Example:
 
@@ -25,10 +25,9 @@ Example:
 		clocks = <&osc 0>;
 		clock-names = "main_clk";
 		vcc-supply = <&hsusb1_vcc_regulator>;
-		reset-supply = <&hsusb1_reset_regulator>;
+		reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 	};
 
 hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
 and expects that clock to be configured to 19.2MHz by the NOP PHY driver.
-hsusb1_vcc_regulator provides power to the PHY and hsusb1_reset_regulator
-controls RESET.
+hsusb1_vcc_regulator provides power to the PHY and GPIO 7 controls RESET.