summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-12-18 16:51:10 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-12-18 16:51:10 -0800
commit752451f01c4567b506bf4343082682dbb8fb30dd (patch)
treeec2ec2989c93e567952ddc1ec879013aa2704f0a /Documentation
parent673ab8783b596cda5b616b317b1a1b47480c66fd (diff)
parent972deb4f49b5b6703d9c6117ba0aeda2180d4447 (diff)
Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux
Pull i2c-embedded changes from Wolfram Sang: - CBUS driver (an I2C variant) - continued rework of the omap driver - s3c2410 gets lots of fixes and gains pinctrl support - at91 gains DMA support - the GPIO muxer gains devicetree probing - typical fixes and additions all over * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits) i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag i2c: at91: add dma support i2c: at91: change struct members indentation i2c: at91: fix compilation warning i2c: mxs: Do not disable the I2C SMBus quick mode i2c: mxs: Handle i2c DMA failure properly i2c: s3c2410: Remove recently introduced performance overheads i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block i2c: s3c2410: Add fix for i2c suspend/resume i2c: s3c2410: Fix code to free gpios i2c: i2c-cbus-gpio: introduce driver i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions i2c: ocores: Add irq support for sparc i2c: omap: Move the remove constraint ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049 i2c: s3c2410: do not special case HDMIPHY stuck bus detection i2c: s3c2410: use exponential back off while polling for bus idle i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY i2c: s3c2410: grab adapter lock while changing i2c clock i2c: s3c2410: Add support for pinctrl ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt27
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt81
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-ocores.txt2
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt20
4 files changed, 125 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt
new file mode 100644
index 00000000000..8ce9cd2855b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt
@@ -0,0 +1,27 @@
+Device tree bindings for i2c-cbus-gpio driver
+
+Required properties:
+ - compatible = "i2c-cbus-gpio";
+ - gpios: clk, dat, sel
+ - #address-cells = <1>;
+ - #size-cells = <0>;
+
+Optional properties:
+ - child nodes conforming to i2c bus binding
+
+Example:
+
+i2c@0 {
+ compatible = "i2c-cbus-gpio";
+ gpios = <&gpio 66 0 /* clk */
+ &gpio 65 0 /* dat */
+ &gpio 64 0 /* sel */
+ >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ retu-mfd: retu@1 {
+ compatible = "retu-mfd";
+ reg = <0x1>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
new file mode 100644
index 00000000000..66709a82554
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
@@ -0,0 +1,81 @@
+GPIO-based I2C Bus Mux
+
+This binding describes an I2C bus multiplexer that uses GPIOs to
+route the I2C signals.
+
+ +-----+ +-----+
+ | dev | | dev |
+ +------------+ +-----+ +-----+
+ | SoC | | |
+ | | /--------+--------+
+ | +------+ | +------+ child bus A, on GPIO value set to 0
+ | | I2C |-|--| Mux |
+ | +------+ | +--+---+ child bus B, on GPIO value set to 1
+ | | | \----------+--------+--------+
+ | +------+ | | | | |
+ | | GPIO |-|-----+ +-----+ +-----+ +-----+
+ | +------+ | | dev | | dev | | dev |
+ +------------+ +-----+ +-----+ +-----+
+
+Required properties:
+- compatible: i2c-mux-gpio
+- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
+ port is connected to.
+- mux-gpios: list of gpios used to control the muxer
+* Standard I2C mux properties. See mux.txt in this directory.
+* I2C child bus nodes. See mux.txt in this directory.
+
+Optional properties:
+- idle-state: value to set the muxer to when idle. When no value is
+ given, it defaults to the last value used.
+
+For each i2c child node, an I2C child bus will be created. They will
+be numbered based on their order in the device tree.
+
+Whenever an access is made to a device on a child bus, the value set
+in the revelant node's reg property will be output using the list of
+GPIOs, the first in the list holding the least-significant value.
+
+If an idle state is defined, using the idle-state (optional) property,
+whenever an access is not being made to a device on a child bus, the
+GPIOs will be set according to the idle value.
+
+If an idle state is not defined, the most recently used value will be
+left programmed into hardware whenever no access is being made to a
+device on a child bus.
+
+Example:
+ i2cmux {
+ compatible = "i2c-mux-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
+ i2c-parent = <&i2c1>;
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssd1307: oled@3c {
+ compatible = "solomon,ssd1307fb-i2c";
+ reg = <0x3c>;
+ pwms = <&pwm 4 3000>;
+ reset-gpios = <&gpio2 7 1>;
+ reset-active-low;
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pca9555: pca9555@20 {
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
index c15781f4dc8..1637c298a1b 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
@@ -1,7 +1,7 @@
Device tree configuration for i2c-ocores
Required properties:
-- compatible : "opencores,i2c-ocores"
+- compatible : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst"
- reg : bus address start and address range size of device
- interrupts : interrupt number
- clock-frequency : frequency of bus clock in Hz
diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
index b6cb5a12c67..e9611ace879 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
@@ -13,11 +13,17 @@ Required properties:
- interrupts: interrupt number to the cpu.
- samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
+Required for all cases except "samsung,s3c2440-hdmiphy-i2c":
+ - Samsung GPIO variant (deprecated):
+ - gpios: The order of the gpios should be the following: <SDA, SCL>.
+ The gpio specifier depends on the gpio controller. Required in all
+ cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
+ lines are permanently wired to the respective clienta
+ - Pinctrl variant (preferred, if available):
+ - pinctrl-0: Pin control group to be used for this controller.
+ - pinctrl-names: Should contain only one value - "default".
+
Optional properties:
- - gpios: The order of the gpios should be the following: <SDA, SCL>.
- The gpio specifier depends on the gpio controller. Required in all
- cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
- lines are permanently wired to the respective client
- samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
specified, default value is 0.
- samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
@@ -31,8 +37,14 @@ Example:
interrupts = <345>;
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <100000>;
+ /* Samsung GPIO variant begins here */
gpios = <&gpd1 2 0 /* SDA */
&gpd1 3 0 /* SCL */>;
+ /* Samsung GPIO variant ends here */
+ /* Pinctrl variant begins here */
+ pinctrl-0 = <&i2c3_bus>;
+ pinctrl-names = "default";
+ /* Pinctrl variant ends here */
#address-cells = <1>;
#size-cells = <0>;