Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

Pull trivial branch from Jiri Kosina:
 "Usual stuff -- comment/printk typo fixes, documentation updates, dead
  code elimination."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  HOWTO: fix double words typo
  x86 mtrr: fix comment typo in mtrr_bp_init
  propagate name change to comments in kernel source
  doc: Update the name of profiling based on sysfs
  treewide: Fix typos in various drivers
  treewide: Fix typos in various Kconfig
  wireless: mwifiex: Fix typo in wireless/mwifiex driver
  messages: i2o: Fix typo in messages/i2o
  scripts/kernel-doc: check that non-void fcts describe their return value
  Kernel-doc: Convention: Use a "Return" section to describe return values
  radeon: Fix typo and copy/paste error in comments
  doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
  various: Fix spelling of "asynchronous" in comments.
  Fix misspellings of "whether" in comments.
  eisa: Fix spelling of "asynchronous".
  various: Fix spelling of "registered" in comments.
  doc: fix quite a few typos within Documentation
  target: iscsi: fix comment typos in target/iscsi drivers
  treewide: fix typo of "suport" in various comments and Kconfig
  treewide: fix typo of "suppport" in various comments
  ...

18 files changed, 30 insertions, 25 deletions

diff --git a/Documentation/ABI/testing/dev-kmsg b/Documentation/ABI/testing/dev-kmsg
index 7e7e07a82e0..bb820be4817 100644
--- a/Documentation/ABI/testing/dev-kmsg
+++ b/Documentation/ABI/testing/dev-kmsg
@@ -92,7 +92,7 @@ Description:	The /dev/kmsg character device node provides userspace access
 		The flags field carries '-' by default. A 'c' indicates a
 		fragment of a line. All following fragments are flagged with
 		'+'. Note, that these hints about continuation lines are not
-		neccessarily correct, and the stream could be interleaved with
+		necessarily correct, and the stream could be interleaved with
 		unrelated messages, but merging the lines in the output
 		usually produces better human readable results. A similar
 		logic is used internally when messages are printed to the
diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
index 7fc2997b23a..9d43e767084 100644
--- a/Documentation/ABI/testing/sysfs-devices-power
+++ b/Documentation/ABI/testing/sysfs-devices-power
@@ -164,7 +164,7 @@ Contact:	Rafael J. Wysocki <rjw@sisk.pl>
 Description:
 		The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
 		contains the total time the device has been preventing
-		opportunistic transitions to sleep states from occuring.
+		opportunistic transitions to sleep states from occurring.
 		This attribute is read-only.  If the device is not enabled to
 		wake up the system from sleep states, this attribute is not
 		present.
diff --git a/Documentation/ABI/testing/sysfs-driver-ppi b/Documentation/ABI/testing/sysfs-driver-ppi
index 97a003ee058..7d1435bc976 100644
--- a/Documentation/ABI/testing/sysfs-driver-ppi
+++ b/Documentation/ABI/testing/sysfs-driver-ppi
@@ -5,7 +5,7 @@ Contact:	xiaoyan.zhang@intel.com
 Description:
 		This folder includes the attributes related with PPI (Physical
 		Presence Interface). Only if TPM is supported by BIOS, this
-		folder makes sence. The folder path can be got by command
+		folder makes sense. The folder path can be got by command
 		'find /sys/ -name 'pcrs''. For the detail information of PPI,
 		please refer to the PPI specification from
 		http://www.trustedcomputinggroup.org/
diff --git a/Documentation/ABI/testing/sysfs-profiling b/Documentation/ABI/testing/sysfs-profiling
index b02d8b8c173..8a8e466eb2c 100644
--- a/Documentation/ABI/testing/sysfs-profiling
+++ b/Documentation/ABI/testing/sysfs-profiling
@@ -1,13 +1,13 @@
-What:		/sys/kernel/profile
+What:		/sys/kernel/profiling
 Date:		September 2008
 Contact:	Dave Hansen <dave@linux.vnet.ibm.com>
 Description:
-		/sys/kernel/profile is the runtime equivalent
+		/sys/kernel/profiling is the runtime equivalent
 		of the boot-time profile= option.
 
 		You can get the same effect running:
 
-			echo 2 > /sys/kernel/profile
+			echo 2 > /sys/kernel/profiling
 
 		as you would by issuing profile=2 on the boot
 		command line.
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 59c080f084e..a9f288ff54f 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -462,7 +462,7 @@ Differences between the kernel community and corporate structures
 
 The kernel community works differently than most traditional corporate
 development environments.  Here are a list of things that you can try to
-do to try to avoid problems:
+do to avoid problems:
   Good things to say regarding your proposed changes:
     - "This solves multiple problems."
     - "This deletes 2000 lines of code."
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index 6f706aca204..f8ebcde43b1 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -51,7 +51,6 @@ int dbg;
 int print_delays;
 int print_io_accounting;
 int print_task_context_switch_counts;
-__u64 stime, utime;
 
 #define PRINTF(fmt, arg...) {			\
 	    if (dbg) {				\
diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt
index ad86fb86c9a..0188903bc9e 100644
--- a/Documentation/dma-buf-sharing.txt
+++ b/Documentation/dma-buf-sharing.txt
@@ -376,7 +376,7 @@ Being able to mmap an export dma-buf buffer object has 2 main use-cases:
    leaving the cpu domain and flushing caches at fault time. Note that all the
    dma_buf files share the same anon inode, hence the exporter needs to replace
    the dma_buf file stored in vma->vm_file with it's own if pte shootdown is
-   requred. This is because the kernel uses the underlying inode's address_space
+   required. This is because the kernel uses the underlying inode's address_space
    for vma tracking (and hence pte tracking at shootdown time with
    unmap_mapping_range).
 
@@ -388,7 +388,7 @@ Being able to mmap an export dma-buf buffer object has 2 main use-cases:
    Exporters that shoot down mappings (for any reasons) shall not do any
    synchronization at fault time with outstanding device operations.
    Synchronization is an orthogonal issue to sharing the backing storage of a
-   buffer and hence should not be handled by dma-buf itself. This is explictly
+   buffer and hence should not be handled by dma-buf itself. This is explicitly
    mentioned here because many people seem to want something like this, but if
    different exporters handle this differently, buffer sharing can fail in
    interesting ways depending upong the exporter (if userspace starts depending
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index 74c25c8d888..b89a739a327 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -181,7 +181,6 @@ modversions.h*
 nconf
 ncscope.*
 offset.h
-offsets.h
 oui.c*
 page-types
 parse.c
diff --git a/Documentation/fault-injection/notifier-error-inject.txt b/Documentation/fault-injection/notifier-error-inject.txt
index c83526c364e..09adabef513 100644
--- a/Documentation/fault-injection/notifier-error-inject.txt
+++ b/Documentation/fault-injection/notifier-error-inject.txt
@@ -1,7 +1,7 @@
 Notifier error injection
 ========================
 
-Notifier error injection provides the ability to inject artifical errors to
+Notifier error injection provides the ability to inject artificial errors to
 specified notifier chain callbacks. It is useful to test the error handling of
 notifier call chain failures which is rarely executed.  There are kernel
 modules that can be used to test the following notifiers.
@@ -14,7 +14,7 @@ modules that can be used to test the following notifiers.
 CPU notifier error injection module
 -----------------------------------
 This feature can be used to test the error handling of the CPU notifiers by
-injecting artifical errors to CPU notifier chain callbacks.
+injecting artificial errors to CPU notifier chain callbacks.
 
 If the notifier call chain should be failed with some events notified, write
 the error code to debugfs interface
diff --git a/Documentation/hid/uhid.txt b/Documentation/hid/uhid.txt
index 4627c4241ec..3c741214dfb 100644
--- a/Documentation/hid/uhid.txt
+++ b/Documentation/hid/uhid.txt
@@ -108,7 +108,7 @@ the request was handled successfully.
   UHID_FEATURE_ANSWER:
   If you receive a UHID_FEATURE request you must answer with this request. You
   must copy the "id" field from the request into the answer. Set the "err" field
-  to 0 if no error occured or to EIO if an I/O error occurred.
+  to 0 if no error occurred or to EIO if an I/O error occurred.
   If "err" is 0 then you should fill the buffer of the answer with the results
   of the feature request and set "size" correspondingly.
 
diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus
index f90f99920cc..3d3a0f97f96 100644
--- a/Documentation/hwmon/pmbus
+++ b/Documentation/hwmon/pmbus
@@ -138,7 +138,7 @@ Sysfs entries
 
 When probing the chip, the driver identifies which PMBus registers are
 supported, and determines available sensors from this information.
-Attribute files only exist if respective sensors are suported by the chip.
+Attribute files only exist if respective sensors are supported by the chip.
 Labels are provided to inform the user about the sensor associated with
 a given sysfs entry.
 
diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt
index ae8ba9a74ce..3262b6e4d68 100644
--- a/Documentation/input/alps.txt
+++ b/Documentation/input/alps.txt
@@ -133,7 +133,7 @@ number of contacts (f1 and f0 in the table below).
 
 This packet only appears after a position packet with the mt bit set, and
 usually only appears when there are two or more contacts (although
-occassionally it's seen with only a single contact).
+occasionally it's seen with only a single contact).
 
 The final v3 packet type is the trackstick packet.
 
diff --git a/Documentation/kbuild/modules.txt b/Documentation/kbuild/modules.txt
index 3fb39e0116b..69372fb98cf 100644
--- a/Documentation/kbuild/modules.txt
+++ b/Documentation/kbuild/modules.txt
@@ -470,7 +470,7 @@ build.
 
 	Sometimes, an external module uses exported symbols from
 	another external module. kbuild needs to have full knowledge of
-	all symbols to avoid spitting out warnings about undefined
+	all symbols to avoid spliitting out warnings about undefined
 	symbols. Three solutions exist for this situation.
 
 	NOTE: The method with a top-level kbuild file is recommended
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index 3d8a97747f7..99b57abddf8 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -64,6 +64,8 @@ Example kernel-doc function comment:
  * comment lines.
  *
  * The longer description can have multiple paragraphs.
+ *
+ * Return: Describe the return value of foobar.
  */
 
 The short description following the subject can span multiple lines
@@ -78,6 +80,8 @@ If a function parameter is "..." (varargs), it should be listed in
 kernel-doc notation as:
  * @...: description
 
+The return value, if any, should be described in a dedicated section
+named "Return".
 
 Example kernel-doc data structure comment.
 
@@ -222,6 +226,9 @@ only a "*").
 "section header:" names must be unique per function (or struct,
 union, typedef, enum).
 
+Use the section header "Return" for sections describing the return value
+of a function.
+
 Avoid putting a spurious blank line after the function name, or else the
 description will be repeated!
 
@@ -237,21 +244,21 @@ patterns, which are highlighted appropriately.
 NOTE 1:  The multi-line descriptive text you provide does *not* recognize
 line breaks, so if you try to format some text nicely, as in:
 
-  Return codes
+  Return:
     0 - cool
     1 - invalid arg
     2 - out of memory
 
 this will all run together and produce:
 
-  Return codes 0 - cool 1 - invalid arg 2 - out of memory
+  Return: 0 - cool 1 - invalid arg 2 - out of memory
 
 NOTE 2:  If the descriptive text you provide has lines that begin with
 some phrase followed by a colon, each of those phrases will be taken as
 a new section heading, which means you should similarly try to avoid text
 like:
 
-  Return codes:
+  Return:
     0: cool
     1: invalid arg
     2: out of memory
diff --git a/Documentation/misc-devices/mei/mei-amt-version.c b/Documentation/misc-devices/mei/mei-amt-version.c
index 01804f21631..49e4f770864 100644
--- a/Documentation/misc-devices/mei/mei-amt-version.c
+++ b/Documentation/misc-devices/mei/mei-amt-version.c
@@ -214,7 +214,7 @@ out:
 }
 
 /***************************************************************************
- * Intel Advanced Management Technolgy ME Client
+ * Intel Advanced Management Technology ME Client
  ***************************************************************************/
 
 #define AMT_MAJOR_VERSION 1
@@ -256,7 +256,7 @@ struct amt_code_versions {
 } __attribute__((packed));
 
 /***************************************************************************
- * Intel Advanced Management Technolgy Host Interface
+ * Intel Advanced Management Technology Host Interface
  ***************************************************************************/
 
 struct amt_host_if_msg_header {
diff --git a/Documentation/video4linux/bttv/Cards b/Documentation/video4linux/bttv/Cards
index db833ced2cb..a8fb6e2d3c8 100644
--- a/Documentation/video4linux/bttv/Cards
+++ b/Documentation/video4linux/bttv/Cards
@@ -43,7 +43,7 @@ Very nice card if you only have satellite TV but several tuners connected
 to the card via composite.
 
 Many thanks to Matrix-Vision for giving us 2 cards for free which made
-Bt848a/Bt849 single crytal operation support possible!!!
+Bt848a/Bt849 single crystal operation support possible!!!
 
 
 
diff --git a/Documentation/video4linux/bttv/Sound-FAQ b/Documentation/video4linux/bttv/Sound-FAQ
index 395f6c6fdd9..d3f1d7783d1 100644
--- a/Documentation/video4linux/bttv/Sound-FAQ
+++ b/Documentation/video4linux/bttv/Sound-FAQ
@@ -82,7 +82,7 @@ card installed, you might to check out if you can read these registers
 values used by the windows driver.  A tool to do this is available
 from ftp://telepresence.dmem.strath.ac.uk/pub/bt848/winutil, but it
 does'nt work with bt878 boards according to some reports I received.
-Another one with bt878 suport is available from
+Another one with bt878 support is available from
 http://btwincap.sourceforge.net/Files/btspy2.00.zip
 
 You might also dig around in the *.ini files of the Windows applications.
diff --git a/Documentation/vm/frontswap.txt b/Documentation/vm/frontswap.txt
index 5ef2d136642..c71a019be60 100644
--- a/Documentation/vm/frontswap.txt
+++ b/Documentation/vm/frontswap.txt
@@ -193,7 +193,7 @@ faster.
    or maybe swap-over-nbd/NFS)?
 
 No.  First, the existing swap subsystem doesn't allow for any kind of
-swap hierarchy.  Perhaps it could be rewritten to accomodate a hierarchy,
+swap hierarchy.  Perhaps it could be rewritten to accommodate a hierarchy,
 but this would require fairly drastic changes.  Even if it were
 rewritten, the existing swap subsystem uses the block I/O layer which
 assumes a swap device is fixed size and any page in it is linearly