Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine updates from Vinod Koul:
 "This pull brings:
   - Andy's DW driver updates
   - Guennadi's sh driver updates
   - Pl08x driver fixes from Tomasz & Alban
   - Improvements to mmp_pdma by Daniel
   - TI EDMA fixes by Joel
   - New drivers:
     - Hisilicon k3dma driver
     - Renesas rcar dma driver
  - New API for publishing slave driver capablities
  - Various fixes across the subsystem by Andy, Jingoo, Sachin etc..."

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (94 commits)
  dma: edma: Remove limits on number of slots
  dma: edma: Leave linked to Null slot instead of DUMMY slot
  dma: edma: Find missed events and issue them
  ARM: edma: Add function to manually trigger an EDMA channel
  dma: edma: Write out and handle MAX_NR_SG at a given time
  dma: edma: Setup parameters to DMA MAX_NR_SG at a time
  dmaengine: pl330: use dma_set_max_seg_size to set the sg limit
  dmaengine: dma_slave_caps: remove sg entries
  dma: replace devm_request_and_ioremap by devm_ioremap_resource
  dma: ste_dma40: Fix potential null pointer dereference
  dma: ste_dma40: Remove duplicate const
  dma: imx-dma: Remove redundant NULL check
  dma: dmagengine: fix function names in comments
  dma: add driver for R-Car HPB-DMAC
  dma: k3dma: use devm_ioremap_resource() instead of devm_request_and_ioremap()
  dma: imx-sdma: Staticize sdma_driver_data structures
  pch_dma: Add MODULE_DEVICE_TABLE
  dmaengine: PL08x: Add cyclic transfer support
  dmaengine: PL08x: Fix reading the byte count in cctl
  dmaengine: PL08x: Add support for different maximum transfer size
  ...

4 files changed, 90 insertions, 27 deletions

diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 68cee4f5539..4fa814d3832 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -1,7 +1,12 @@
 * Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
 
 Required properties:
-- compatible : Should be "fsl,<chip>-sdma"
+- compatible : Should be "fsl,imx31-sdma", "fsl,imx31-to1-sdma",
+  "fsl,imx31-to2-sdma", "fsl,imx35-sdma", "fsl,imx35-to1-sdma",
+  "fsl,imx35-to2-sdma", "fsl,imx51-sdma", "fsl,imx53-sdma" or
+  "fsl,imx6q-sdma". The -to variants should be preferred since they
+  allow to determnine the correct ROM script addresses needed for
+  the driver to work without additional firmware.
 - reg : Should contain SDMA registers location and length
 - interrupts : Should contain SDMA interrupt
 - #dma-cells : Must be <3>.
diff --git a/Documentation/devicetree/bindings/dma/k3dma.txt b/Documentation/devicetree/bindings/dma/k3dma.txt
new file mode 100644
index 00000000000..23f8d712c3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/k3dma.txt
@@ -0,0 +1,46 @@
+* Hisilicon K3 DMA controller
+
+See dma.txt first
+
+Required properties:
+- compatible: Should be "hisilicon,k3-dma-1.0"
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain one interrupt shared by all channel
+- #dma-cells: see dma.txt, should be 1, para number
+- dma-channels: physical channels supported
+- dma-requests: virtual channels supported, each virtual channel
+		have specific request line
+- clocks: clock required
+
+Example:
+
+Controller:
+		dma0: dma@fcd02000 {
+			compatible = "hisilicon,k3-dma-1.0";
+			reg = <0xfcd02000 0x1000>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			dma-requests = <27>;
+			interrupts = <0 12 4>;
+			clocks = <&pclk>;
+			status = "disable";
+		};
+
+Client:
+Use specific request line passing from dmax
+For example, i2c0 read channel request line is 18, while write channel use 19
+
+		i2c0: i2c@fcb08000 {
+			compatible = "snps,designware-i2c";
+			dmas =	<&dma0 18          /* read channel */
+				 &dma0 19>;        /* write channel */
+			dma-names = "rx", "tx";
+		};
+
+		i2c1: i2c@fcb09000 {
+			compatible = "snps,designware-i2c";
+			dmas =	<&dma0 20          /* read channel */
+				 &dma0 21>;        /* write channel */
+			dma-names = "rx", "tx";
+		};
+
diff --git a/Documentation/devicetree/bindings/dma/shdma.txt b/Documentation/devicetree/bindings/dma/shdma.txt
index c15994aa193..2a3f3b8946b 100644
--- a/Documentation/devicetree/bindings/dma/shdma.txt
+++ b/Documentation/devicetree/bindings/dma/shdma.txt
@@ -22,42 +22,51 @@ Optional properties (currently unused):
 * DMA controller
 
 Required properties:
-- compatible:	should be "renesas,shdma"
+- compatible:	should be of the form "renesas,shdma-<soc>", where <soc> should
+		be replaced with the desired SoC model, e.g.
+		"renesas,shdma-r8a73a4" for the system DMAC on r8a73a4 SoC
 
 Example:
-	dmac: dma-mux0 {
+	dmac: dma-multiplexer@0 {
 		compatible = "renesas,shdma-mux";
 		#dma-cells = <1>;
-		dma-channels = <6>;
+		dma-channels = <20>;
 		dma-requests = <256>;
-		reg = <0 0>;	/* Needed for AUXDATA */
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 		ranges;
 
-		dma0: shdma@fe008020 {
-			compatible = "renesas,shdma";
-			reg = <0xfe008020 0x270>,
-				<0xfe009000 0xc>;
+		dma0: dma-controller@e6700020 {
+			compatible = "renesas,shdma-r8a73a4";
+			reg = <0 0xe6700020 0 0x89e0>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 34 4
-					0 28 4
-					0 29 4
-					0 30 4
-					0 31 4
-					0 32 4
-					0 33 4>;
+			interrupts = <0 220 4
+					0 200 4
+					0 201 4
+					0 202 4
+					0 203 4
+					0 204 4
+					0 205 4
+					0 206 4
+					0 207 4
+					0 208 4
+					0 209 4
+					0 210 4
+					0 211 4
+					0 212 4
+					0 213 4
+					0 214 4
+					0 215 4
+					0 216 4
+					0 217 4
+					0 218 4
+					0 219 4>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
-					"ch4", "ch5";
-		};
-
-		dma1: shdma@fe018020 {
-			...
-		};
-
-		dma2: shdma@fe028020 {
-			...
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15",
+					"ch16", "ch17", "ch18", "ch19";
 		};
 	};
 
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index fb57d85e731..fcb34a5697e 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -299,3 +299,6 @@ PWM
 PHY
   devm_usb_get_phy()
   devm_usb_put_phy()
+
+SLAVE DMA ENGINE
+  devm_acpi_dma_controller_register()