Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	net/sched/sch_hfsc.c
	net/sched/sch_htb.c
	net/sched/sch_tbf.c

12 files changed, 133 insertions, 79 deletions

diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index 35447e08173..36f63d4a0a0 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -217,8 +217,8 @@ X!Isound/sound_firmware.c
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
 !Iinclude/linux/serial_core.h
-!Edrivers/serial/serial_core.c
-!Edrivers/serial/8250.c
+!Edrivers/tty/serial/serial_core.c
+!Edrivers/tty/serial/8250.c
   </chapter>
 
   <chapter id="fbdev">
diff --git a/Documentation/DocBook/dvb/dvbapi.xml b/Documentation/DocBook/dvb/dvbapi.xml
index e3a97fdd62a..ad8678d4891 100644
--- a/Documentation/DocBook/dvb/dvbapi.xml
+++ b/Documentation/DocBook/dvb/dvbapi.xml
@@ -28,7 +28,7 @@
 	<holder>Convergence GmbH</holder>
 </copyright>
 <copyright>
-	<year>2009-2010</year>
+	<year>2009-2011</year>
 	<holder>Mauro Carvalho Chehab</holder>
 </copyright>
 
diff --git a/Documentation/DocBook/media.tmpl b/Documentation/DocBook/media.tmpl
index f11048d4053..a99088aae1a 100644
--- a/Documentation/DocBook/media.tmpl
+++ b/Documentation/DocBook/media.tmpl
@@ -28,7 +28,7 @@
 <title>LINUX MEDIA INFRASTRUCTURE API</title>
 
 <copyright>
-	<year>2009-2010</year>
+	<year>2009-2011</year>
 	<holder>LinuxTV Developers</holder>
 </copyright>
 
@@ -86,7 +86,7 @@ Foundation. A copy of the license is included in the chapter entitled
 </author>
 </authorgroup>
 <copyright>
-	<year>2009-2010</year>
+	<year>2009-2011</year>
 	<holder>Mauro Carvalho Chehab</holder>
 </copyright>
 
diff --git a/Documentation/DocBook/v4l/dev-rds.xml b/Documentation/DocBook/v4l/dev-rds.xml
index 360d2737e64..2427f54397e 100644
--- a/Documentation/DocBook/v4l/dev-rds.xml
+++ b/Documentation/DocBook/v4l/dev-rds.xml
@@ -75,6 +75,7 @@ as follows:</para>
   </section>
 
   <section>
+    <title>RDS datastructures</title>
     <table frame="none" pgwide="1" id="v4l2-rds-data">
       <title>struct
 <structname>v4l2_rds_data</structname></title>
@@ -129,10 +130,11 @@ as follows:</para>
 
     <table frame="none" pgwide="1" id="v4l2-rds-block-codes">
       <title>Block defines</title>
-      <tgroup cols="3">
+      <tgroup cols="4">
 	<colspec colname="c1" colwidth="1*" />
 	<colspec colname="c2" colwidth="1*" />
-	<colspec colname="c3" colwidth="5*" />
+	<colspec colname="c3" colwidth="1*" />
+	<colspec colname="c4" colwidth="5*" />
 	<tbody valign="top">
 	  <row>
 	    <entry>V4L2_RDS_BLOCK_MSK</entry>
diff --git a/Documentation/DocBook/v4l/v4l2.xml b/Documentation/DocBook/v4l/v4l2.xml
index 839e93e875a..9288af96de3 100644
--- a/Documentation/DocBook/v4l/v4l2.xml
+++ b/Documentation/DocBook/v4l/v4l2.xml
@@ -100,6 +100,7 @@ Remote Controller chapter.</contrib>
       <year>2008</year>
       <year>2009</year>
       <year>2010</year>
+      <year>2011</year>
       <holder>Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin
 Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder>
     </copyright>
@@ -381,7 +382,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 2.6.33</subtitle>
+ <subtitle>Revision 2.6.38</subtitle>
 
   <chapter id="common">
     &sub-common;
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 05b248aa91f..ccb6048415b 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -357,14 +357,6 @@ Who:	Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
 
 -----------------------------
 
-What:	__do_IRQ all in one fits nothing interrupt handler
-When:	2.6.32
-Why:	__do_IRQ was kept for easy migration to the type flow handlers.
-	More than two years of migration time is enough.
-Who:	Thomas Gleixner <tglx@linutronix.de>
-
------------------------------
-
 What:	fakephp and associated sysfs files in /sys/bus/pci/slots/
 When:	2011
 Why:	In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index dc73bc54cc4..d9da7e14853 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -39,6 +39,9 @@
 #include <limits.h>
 #include <stddef.h>
 #include <signal.h>
+#include <pwd.h>
+#include <grp.h>
+
 #include <linux/virtio_config.h>
 #include <linux/virtio_net.h>
 #include <linux/virtio_blk.h>
@@ -298,20 +301,27 @@ static void *map_zeroed_pages(unsigned int num)
 
 	/*
 	 * We use a private mapping (ie. if we write to the page, it will be
-	 * copied).
+	 * copied). We allocate an extra two pages PROT_NONE to act as guard
+	 * pages against read/write attempts that exceed allocated space.
 	 */
-	addr = mmap(NULL, getpagesize() * num,
-		    PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
+	addr = mmap(NULL, getpagesize() * (num+2),
+		    PROT_NONE, MAP_PRIVATE, fd, 0);
+
 	if (addr == MAP_FAILED)
 		err(1, "Mmapping %u pages of /dev/zero", num);
 
+	if (mprotect(addr + getpagesize(), getpagesize() * num,
+		     PROT_READ|PROT_WRITE) == -1)
+		err(1, "mprotect rw %u pages failed", num);
+
 	/*
 	 * One neat mmap feature is that you can close the fd, and it
 	 * stays mapped.
 	 */
 	close(fd);
 
-	return addr;
+	/* Return address after PROT_NONE page */
+	return addr + getpagesize();
 }
 
 /* Get some more pages for a device. */
@@ -343,7 +353,7 @@ static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
 	 * done to it.  This allows us to share untouched memory between
 	 * Guests.
 	 */
-	if (mmap(addr, len, PROT_READ|PROT_WRITE|PROT_EXEC,
+	if (mmap(addr, len, PROT_READ|PROT_WRITE,
 		 MAP_FIXED|MAP_PRIVATE, fd, offset) != MAP_FAILED)
 		return;
 
@@ -573,10 +583,10 @@ static void *_check_pointer(unsigned long addr, unsigned int size,
 			    unsigned int line)
 {
 	/*
-	 * We have to separately check addr and addr+size, because size could
-	 * be huge and addr + size might wrap around.
+	 * Check if the requested address and size exceeds the allocated memory,
+	 * or addr + size wraps around.
 	 */
-	if (addr >= guest_limit || addr + size >= guest_limit)
+	if ((addr + size) > guest_limit || (addr + size) < addr)
 		errx(1, "%s:%i: Invalid address %#lx", __FILE__, line, addr);
 	/*
 	 * We return a pointer for the caller's convenience, now we know it's
@@ -1872,6 +1882,8 @@ static struct option opts[] = {
 	{ "block", 1, NULL, 'b' },
 	{ "rng", 0, NULL, 'r' },
 	{ "initrd", 1, NULL, 'i' },
+	{ "username", 1, NULL, 'u' },
+	{ "chroot", 1, NULL, 'c' },
 	{ NULL },
 };
 static void usage(void)
@@ -1894,6 +1906,12 @@ int main(int argc, char *argv[])
 	/* If they specify an initrd file to load. */
 	const char *initrd_name = NULL;
 
+	/* Password structure for initgroups/setres[gu]id */
+	struct passwd *user_details = NULL;
+
+	/* Directory to chroot to */
+	char *chroot_path = NULL;
+
 	/* Save the args: we "reboot" by execing ourselves again. */
 	main_args = argv;
 
@@ -1950,6 +1968,14 @@ int main(int argc, char *argv[])
 		case 'i':
 			initrd_name = optarg;
 			break;
+		case 'u':
+			user_details = getpwnam(optarg);
+			if (!user_details)
+				err(1, "getpwnam failed, incorrect username?");
+			break;
+		case 'c':
+			chroot_path = optarg;
+			break;
 		default:
 			warnx("Unknown argument %s", argv[optind]);
 			usage();
@@ -2021,6 +2047,37 @@ int main(int argc, char *argv[])
 	/* If we exit via err(), this kills all the threads, restores tty. */
 	atexit(cleanup_devices);
 
+	/* If requested, chroot to a directory */
+	if (chroot_path) {
+		if (chroot(chroot_path) != 0)
+			err(1, "chroot(\"%s\") failed", chroot_path);
+
+		if (chdir("/") != 0)
+			err(1, "chdir(\"/\") failed");
+
+		verbose("chroot done\n");
+	}
+
+	/* If requested, drop privileges */
+	if (user_details) {
+		uid_t u;
+		gid_t g;
+
+		u = user_details->pw_uid;
+		g = user_details->pw_gid;
+
+		if (initgroups(user_details->pw_name, g) != 0)
+			err(1, "initgroups failed");
+
+		if (setresgid(g, g, g) != 0)
+			err(1, "setresgid failed");
+
+		if (setresuid(u, u, u) != 0)
+			err(1, "setresuid failed");
+
+		verbose("Dropping privileges completed\n");
+	}
+
 	/* Finally, run the Guest.  This doesn't return. */
 	run_guest();
 }
diff --git a/Documentation/lguest/lguest.txt b/Documentation/lguest/lguest.txt
index 6ccaf8e1a00..dad99978a6a 100644
--- a/Documentation/lguest/lguest.txt
+++ b/Documentation/lguest/lguest.txt
@@ -117,6 +117,11 @@ Running Lguest:
     
   for general information on how to get bridging to work.
 
+- Random number generation. Using the --rng option will provide a
+  /dev/hwrng in the guest that will read from the host's /dev/random.
+  Use this option in conjunction with rng-tools (see ../hw_random.txt)
+  to provide entropy to the guest kernel's /dev/random.
+
 There is a helpful mailing list at http://ozlabs.org/mailman/listinfo/lguest
 
 Good luck!
diff --git a/Documentation/sound/alsa/soc/codec.txt b/Documentation/sound/alsa/soc/codec.txt
index 37ba3a72cb7..bce23a4a787 100644
--- a/Documentation/sound/alsa/soc/codec.txt
+++ b/Documentation/sound/alsa/soc/codec.txt
@@ -27,42 +27,38 @@ ASoC Codec driver breakdown
 
 1 - Codec DAI and PCM configuration
 -----------------------------------
-Each codec driver must have a struct snd_soc_codec_dai to define its DAI and
+Each codec driver must have a struct snd_soc_dai_driver to define its DAI and
 PCM capabilities and operations. This struct is exported so that it can be
 registered with the core by your machine driver.
 
 e.g.
 
-struct snd_soc_codec_dai wm8731_dai = {
-	.name = "WM8731",
-	/* playback capabilities */
+static struct snd_soc_dai_ops wm8731_dai_ops = {
+	.prepare	= wm8731_pcm_prepare,
+	.hw_params	= wm8731_hw_params,
+	.shutdown	= wm8731_shutdown,
+	.digital_mute	= wm8731_mute,
+	.set_sysclk	= wm8731_set_dai_sysclk,
+	.set_fmt	= wm8731_set_dai_fmt,
+};
+
+struct snd_soc_dai_driver wm8731_dai = {
+	.name = "wm8731-hifi",
 	.playback = {
 		.stream_name = "Playback",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM8731_RATES,
 		.formats = WM8731_FORMATS,},
-	/* capture capabilities */
 	.capture = {
 		.stream_name = "Capture",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM8731_RATES,
 		.formats = WM8731_FORMATS,},
-	/* pcm operations - see section 4 below */
-	.ops = {
-		.prepare = wm8731_pcm_prepare,
-		.hw_params = wm8731_hw_params,
-		.shutdown = wm8731_shutdown,
-	},
-	/* DAI operations - see DAI.txt */
-	.dai_ops = {
-		.digital_mute = wm8731_mute,
-		.set_sysclk = wm8731_set_dai_sysclk,
-		.set_fmt = wm8731_set_dai_fmt,
-	}
+	.ops = &wm8731_dai_ops,
+	.symmetric_rates = 1,
 };
-EXPORT_SYMBOL_GPL(wm8731_dai);
 
 
 2 - Codec control IO
@@ -186,13 +182,14 @@ when the mute is applied or freed.
 
 i.e.
 
-static int wm8974_mute(struct snd_soc_codec *codec,
-	struct snd_soc_codec_dai *dai, int mute)
+static int wm8974_mute(struct snd_soc_dai *dai, int mute)
 {
-	u16 mute_reg = wm8974_read_reg_cache(codec, WM8974_DAC) & 0xffbf;
-	if(mute)
-		wm8974_write(codec, WM8974_DAC, mute_reg | 0x40);
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = snd_soc_read(codec, WM8974_DAC) & 0xffbf;
+
+	if (mute)
+		snd_soc_write(codec, WM8974_DAC, mute_reg | 0x40);
 	else
-		wm8974_write(codec, WM8974_DAC, mute_reg);
+		snd_soc_write(codec, WM8974_DAC, mute_reg);
 	return 0;
 }
diff --git a/Documentation/sound/alsa/soc/machine.txt b/Documentation/sound/alsa/soc/machine.txt
index 2524c75557d..3e2ec9cbf39 100644
--- a/Documentation/sound/alsa/soc/machine.txt
+++ b/Documentation/sound/alsa/soc/machine.txt
@@ -12,6 +12,8 @@ the following struct:-
 struct snd_soc_card {
 	char *name;
 
+	...
+
 	int (*probe)(struct platform_device *pdev);
 	int (*remove)(struct platform_device *pdev);
 
@@ -22,12 +24,13 @@ struct snd_soc_card {
 	int (*resume_pre)(struct platform_device *pdev);
 	int (*resume_post)(struct platform_device *pdev);
 
-	/* machine stream operations */
-	struct snd_soc_ops *ops;
+	...
 
 	/* CPU <--> Codec DAI links  */
 	struct snd_soc_dai_link *dai_link;
 	int num_links;
+
+	...
 };
 
 probe()/remove()
@@ -42,11 +45,6 @@ of any machine audio tasks that have to be done before or after the codec, DAIs
 and DMA is suspended and resumed. Optional.
 
 
-Machine operations
-------------------
-The machine specific audio operations can be set here. Again this is optional.
-
-
 Machine DAI Configuration
 -------------------------
 The machine DAI configuration glues all the codec and CPU DAIs together. It can
@@ -61,8 +59,10 @@ struct snd_soc_dai_link is used to set up each DAI in your machine. e.g.
 static struct snd_soc_dai_link corgi_dai = {
 	.name = "WM8731",
 	.stream_name = "WM8731",
-	.cpu_dai = &pxa_i2s_dai,
-	.codec_dai = &wm8731_dai,
+	.cpu_dai_name = "pxa-is2-dai",
+	.codec_dai_name = "wm8731-hifi",
+	.platform_name = "pxa-pcm-audio",
+	.codec_name = "wm8713-codec.0-001a",
 	.init = corgi_wm8731_init,
 	.ops = &corgi_ops,
 };
@@ -77,26 +77,6 @@ static struct snd_soc_card snd_soc_corgi = {
 };
 
 
-Machine Audio Subsystem
------------------------
-
-The machine soc device glues the platform, machine and codec driver together.
-Private data can also be set here. e.g.
-
-/* corgi audio private data */
-static struct wm8731_setup_data corgi_wm8731_setup = {
-	.i2c_address = 0x1b,
-};
-
-/* corgi audio subsystem */
-static struct snd_soc_device corgi_snd_devdata = {
-	.machine = &snd_soc_corgi,
-	.platform = &pxa2xx_soc_platform,
-	.codec_dev = &soc_codec_dev_wm8731,
-	.codec_data = &corgi_wm8731_setup,
-};
-
-
 Machine Power Map
 -----------------
 
diff --git a/Documentation/sound/alsa/soc/platform.txt b/Documentation/sound/alsa/soc/platform.txt
index 06d835987c6..d57efad37e0 100644
--- a/Documentation/sound/alsa/soc/platform.txt
+++ b/Documentation/sound/alsa/soc/platform.txt
@@ -20,9 +20,10 @@ struct snd_soc_ops {
 	int (*trigger)(struct snd_pcm_substream *, int);
 };
 
-The platform driver exports its DMA functionality via struct snd_soc_platform:-
+The platform driver exports its DMA functionality via struct
+snd_soc_platform_driver:-
 
-struct snd_soc_platform {
+struct snd_soc_platform_driver {
 	char *name;
 
 	int (*probe)(struct platform_device *pdev);
@@ -34,6 +35,13 @@ struct snd_soc_platform {
 	int (*pcm_new)(struct snd_card *, struct snd_soc_codec_dai *, struct snd_pcm *);
 	void (*pcm_free)(struct snd_pcm *);
 
+	/*
+	 * For platform caused delay reporting.
+	 * Optional.
+	 */
+	snd_pcm_sframes_t (*delay)(struct snd_pcm_substream *,
+		struct snd_soc_dai *);
+
 	/* platform stream ops */
 	struct snd_pcm_ops *pcm_ops;
 };
diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt
index 8773778d23f..881e7f44491 100644
--- a/Documentation/video4linux/v4l2-controls.txt
+++ b/Documentation/video4linux/v4l2-controls.txt
@@ -285,6 +285,9 @@ implement g_volatile_ctrl like this:
 The 'new value' union is not used in g_volatile_ctrl. In general controls
 that need to implement g_volatile_ctrl are read-only controls.
 
+Note that if one or more controls in a control cluster are marked as volatile,
+then all the controls in the cluster are seen as volatile.
+
 To mark a control as volatile you have to set the is_volatile flag:
 
 	ctrl = v4l2_ctrl_new_std(&sd->ctrl_handler, ...);
@@ -462,6 +465,15 @@ pointer to the v4l2_ctrl_ops struct that is used for that cluster.
 Obviously, all controls in the cluster array must be initialized to either
 a valid control or to NULL.
 
+In rare cases you might want to know which controls of a cluster actually
+were set explicitly by the user. For this you can check the 'is_new' flag of
+each control. For example, in the case of a volume/mute cluster the 'is_new'
+flag of the mute control would be set if the user called VIDIOC_S_CTRL for
+mute only. If the user would call VIDIOC_S_EXT_CTRLS for both mute and volume
+controls, then the 'is_new' flag would be 1 for both controls.
+
+The 'is_new' flag is always 1 when called from v4l2_ctrl_handler_setup().
+
 
 VIDIOC_LOG_STATUS Support
 =========================