diff options
| author | Len Brown <len.brown@intel.com> | 2007-08-12 00:12:26 -0400 |
|---|---|---|
| committer | Len Brown <len.brown@intel.com> | 2007-08-12 00:12:26 -0400 |
| commit | 730ff34de766a6fddee25ac1c32bc49c1a2fd758 (patch) | |
| tree | 5f731caa06d3f12149c62d11cc908a26bc80d3b9 /Documentation | |
| parent | 72b33ef8bb1ac7f6c5a16d23304ab25ddc73d93d (diff) | |
ACPI: thermal: expose "thermal.tzp=" to set global polling frequency
Thermal Zone Polling frequency (_TZP) is an optional ACPI object
recommending the rate that the OS should poll the associated thermal zone.
If _TZP is 0, no polling should be used.
If _TZP is non-zero, then the platform recommends that
the OS poll the thermal zone at the specified rate.
The minimum period is 30 seconds.
The maximum period is 5 minutes.
(note _TZP and thermal.tzp units are in deci-seconds,
so _TZP = 300 corresponds to 30 seconds)
If _TZP is not present, ACPI 3.0b recommends that the
thermal zone be polled at an "OS provided default frequency".
However, common industry practice is:
1. The BIOS never specifies any _TZP
2. High volume OS's from this century never poll any thermal zones
Ie. The OS depends on the platform's ability to
provoke thermal events when necessary, and
the "OS provided default frequency" is "never":-)
There is a proposal that ACPI 4.0 be updated to reflect
common industry practice -- ie. no _TZP, no polling.
The Linux kernel already follows this practice --
thermal zones are not polled unless _TZP is present and non-zero.
But thermal zone polling is useful as a workaround for systems
which have ACPI thermal control, but have an issue preventing
thermal events. Indeed, some Linux distributions still
set a non-zero thermal polling frequency for this reason.
But rather than ask the user to write a polling frequency
into all the /proc/acpi/thermal_zone/*/polling_frequency
files, here we simply document and expose the already
existing module parameter to do the same at system level,
to simplify debugging those broken platforms.
Note that thermal.tzp is a module-load time parameter only.
Signed-off-by: Len Brown <len.brown@intel.com>
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/kernel-parameters.txt | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index de3300c9056..ed7d7913af8 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1823,6 +1823,11 @@ and is between 256 and 4096 characters. It is defined in the file thermal.off= [HW,ACPI] 1: disable ACPI thermal control + thermal.tzp= [HW,ACPI] + Specify global default ACPI thermal zone polling rate + <deci-seconds>: poll all this frequency + 0: no polling (default) + time Show timing data prefixed to each printk message line [deprecated, see 'printk.time'] |