Merge tag 'pwm/for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm changes from Thierry Reding:
 "Mostly bug fixes and clean up.  There is a new driver, which is
  actually moving a custom PWM driver from drivers/misc.

  The majority of the patches are enhancements to the device tree
  support in the pwm-backlight driver.  Backlights can now additionally
  be powered using a regulator and enabled using a GPIO in addition to
  just the PWM input"

* tag 'pwm/for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits)
  Documentation/pwm: Update supported SoC name for pwm-samsung
  pwm: samsung: Fix kernel warning while unexporting a channel
  MAINTAINERS: Move PWM subsystem tree to kernel.org
  Documentation/pwm: Fix trivial typos
  pwm-backlight: Remove unused variable
  pwm_backlight: avoid short blank screen while doing hibernation
  pwm-backlight: Fix brightness adjustment
  pwm: add ep93xx PWM support
  pwm-backlight: Allow for non-increasing brightness levels
  pwm-backlight: Add power supply support
  pwm-backlight: Use new enable_gpio field
  unicore32: Initialize PWM backlight enable_gpio field
  ARM: shmobile: Initialize PWM backlight enable_gpio field
  ARM: SAMSUNG: Initialize PWM backlight enable_gpio field
  ARM: pxa: Initialize PWM backlight enable_gpio field
  ARM: OMAP: Initialize PWM backlight enable_gpio field
  pwm-backlight: Add optional enable GPIO
  pwm-backlight: Track enable state
  pwm-backlight: Refactor backlight power on/off
  pwm-backlight: Improve readability
  ...

3 files changed, 10 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.txt b/Documentation/devicetree/bindings/pwm/pwm-samsung.txt
index d61fccd40ba..5538de9c200 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-samsung.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.txt
@@ -15,7 +15,7 @@ Required properties:
     samsung,s5pc100-pwm - for 32-bit timers present on S5PC100, S5PV210,
 			  Exynos4210 rev0 SoCs
     samsung,exynos4210-pwm - for 32-bit timers present on Exynos4210,
-                          Exynos4x12 and Exynos5250 SoCs
+                          Exynos4x12, Exynos5250 and Exynos5420 SoCs
 - reg: base address and size of register area
 - interrupts: list of timer interrupts (one interrupt per timer, starting at
   timer 0)
diff --git a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
index 1e4fc727f3b..764db86d441 100644
--- a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
+++ b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
@@ -10,12 +10,16 @@ Required properties:
       last value in the array represents a 100% duty cycle (brightest).
   - default-brightness-level: the default brightness level (index into the
       array defined by the "brightness-levels" property)
+  - power-supply: regulator for supply voltage
 
 Optional properties:
   - pwm-names: a list of names for the PWM devices specified in the
                "pwms" property (see PWM binding[0])
+  - enable-gpios: contains a single GPIO specifier for the GPIO which enables
+                  and disables the backlight (see GPIO binding[1])
 
 [0]: Documentation/devicetree/bindings/pwm/pwm.txt
+[1]: Documentation/devicetree/bindings/gpio/gpio.txt
 
 Example:
 
@@ -25,4 +29,7 @@ Example:
 
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
+
+		power-supply = <&vdd_bl_reg>;
+		enable-gpios = <&gpio 58 0>;
 	};
diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt
index 1039b68fe9c..93cb9797498 100644
--- a/Documentation/pwm.txt
+++ b/Documentation/pwm.txt
@@ -39,7 +39,7 @@ New users should use the pwm_get() function and pass to it the consumer
 device or a consumer name. pwm_put() is used to free the PWM device. Managed
 variants of these functions, devm_pwm_get() and devm_pwm_put(), also exist.
 
-After being requested a PWM has to be configured using:
+After being requested, a PWM has to be configured using:
 
 int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns);
 
@@ -94,7 +94,7 @@ for new drivers to use the generic PWM framework.
 A new PWM controller/chip can be added using pwmchip_add() and removed
 again with pwmchip_remove(). pwmchip_add() takes a filled in struct
 pwm_chip as argument which provides a description of the PWM chip, the
-number of PWM devices provider by the chip and the chip-specific
+number of PWM devices provided by the chip and the chip-specific
 implementation of the supported PWM operations to the framework.
 
 Locking