Merge tag 'clk-for-linus-3.15' of git://git.linaro.org/people/mike.turquette/linux

Pull clock framework changes from Mike Turquette:
 "The clock framework changes for 3.15 look similar to past pull
  requests.  Mostly clock driver updates, more Device Tree support in
  the form of common functions useful across platforms and a handful of
  features and fixes to the framework core"

* tag 'clk-for-linus-3.15' of git://git.linaro.org/people/mike.turquette/linux: (86 commits)
  clk: shmobile: fix setting paretn clock rate
  clk: shmobile: rcar-gen2: fix lb/sd0/sd1/sdh clock parent to pll1
  clk: Fix minor errors in of_clk_init() function comments
  clk: reverse default clk provider initialization order in of_clk_init()
  clk: sirf: update copyright years to 2014
  clk: mmp: try to use closer one when do round rate
  clk: mmp: fix the wrong calculation formula
  clk: mmp: fix wrong mask when calculate denominator
  clk: st: Adds quadfs clock binding
  clk: st: Adds clockgen-vcc and clockgen-mux clock binding
  clk: st: Adds clockgen clock binding
  clk: st: Adds divmux and prediv clock binding
  clk: st: Support for A9 MUX clocks
  clk: st: Support for ClockGenA9/DDR/GPU
  clk: st: Support for QUADFS inside ClockGenB/C/D/E/F
  clk: st: Support for VCC-mux and MUX clocks
  clk: st: Support for PLLs inside ClockGenA(s)
  clk: st: Support for DIVMUX and PreDiv Clocks
  clk: support hardware-specific debugfs entries
  clk: s2mps11: Use of_get_child_by_name
  ...

19 files changed, 657 insertions, 29 deletions

diff --git a/Documentation/clk.txt b/Documentation/clk.txt
index 699ef2a323b..c9c399af7c0 100644
--- a/Documentation/clk.txt
+++ b/Documentation/clk.txt
@@ -255,3 +255,37 @@ are sorted out.
 
 To bypass this disabling, include "clk_ignore_unused" in the bootargs to the
 kernel.
+
+	Part 7 - Locking
+
+The common clock framework uses two global locks, the prepare lock and the
+enable lock.
+
+The enable lock is a spinlock and is held across calls to the .enable,
+.disable and .is_enabled operations. Those operations are thus not allowed to
+sleep, and calls to the clk_enable(), clk_disable() and clk_is_enabled() API
+functions are allowed in atomic context.
+
+The prepare lock is a mutex and is held across calls to all other operations.
+All those operations are allowed to sleep, and calls to the corresponding API
+functions are not allowed in atomic context.
+
+This effectively divides operations in two groups from a locking perspective.
+
+Drivers don't need to manually protect resources shared between the operations
+of one group, regardless of whether those resources are shared by multiple
+clocks or not. However, access to resources that are shared between operations
+of the two groups needs to be protected by the drivers. An example of such a
+resource would be a register that controls both the clock rate and the clock
+enable/disable state.
+
+The clock framework is reentrant, in that a driver is allowed to call clock
+framework functions from within its implementation of clock operations. This
+can for instance cause a .set_rate operation of one clock being called from
+within the .set_rate operation of another clock. This case must be considered
+in the driver implementations, but the code flow is usually controlled by the
+driver in that case.
+
+Note that locking must also be considered when code outside of the common
+clock framework needs to access resources used by the clock operations. This
+is considered out of scope of this document.
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index 8c7a4653508..df0a452b852 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -30,3 +30,17 @@ Example:
 		resume-offset = <0x308>;
 		reboot-offset = <0x4>;
 	};
+
+PCTRL: Peripheral misc control register
+
+Required Properties:
+- compatible: "hisilicon,pctrl"
+- reg: Address and size of pctrl.
+
+Example:
+
+	/* for Hi3620 */
+	pctrl: pctrl@fca09000 {
+		compatible = "hisilicon,pctrl";
+		reg = <0xfca09000 0x1000>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/altr_socfpga.txt b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
index 0045433eae1..5dfd145d3cc 100644
--- a/Documentation/devicetree/bindings/clock/altr_socfpga.txt
+++ b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
@@ -23,3 +23,8 @@ Optional properties:
         and the bit index.
 - div-reg : For "socfpga-gate-clk", div-reg contains the divider register, bit shift,
         and width.
+- clk-phase : For the sdmmc_clk, contains the value of the clock phase that controls
+	the SDMMC CIU clock. The first value is the clk_sample(smpsel), and the second
+	value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct
+	hold/delay times that is needed for the SD/MMC CIU clock. The values of both
+	can be 0-315 degrees, in 45 degree increments.
diff --git a/Documentation/devicetree/bindings/clock/axi-clkgen.txt b/Documentation/devicetree/bindings/clock/axi-clkgen.txt
index 028b493e97f..20e1704e7df 100644
--- a/Documentation/devicetree/bindings/clock/axi-clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/axi-clkgen.txt
@@ -5,7 +5,7 @@ This binding uses the common clock binding[1].
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 
 Required properties:
-- compatible : shall be "adi,axi-clkgen".
+- compatible : shall be "adi,axi-clkgen-1.00.a" or "adi,axi-clkgen-2.00.a".
 - #clock-cells : from common clock binding; Should always be set to 0.
 - reg : Address and length of the axi-clkgen register set.
 - clocks : Phandle and clock specifier for the parent clock.
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index 7c52c29d99f..700e7aac371 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -44,6 +44,23 @@ For example:
   clocks by index. The names should reflect the clock output signal
   names for the device.
 
+clock-indices:	   If the identifyng number for the clocks in the node
+		   is not linear from zero, then the this mapping allows
+		   the mapping of identifiers into the clock-output-names
+		   array.
+
+For example, if we have two clocks <&oscillator 1> and <&oscillator 3>:
+
+	oscillator {
+		compatible = "myclocktype";
+		#clock-cells = <1>;
+		clock-indices = <1>, <3>;
+		clock-output-names = "clka", "clkb";
+	}
+
+	This ensures we do not have any empty nodes in clock-output-names
+
+
 ==Clock consumers==
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/clock/hi3620-clock.txt b/Documentation/devicetree/bindings/clock/hi3620-clock.txt
index 4b71ab41be5..dad6269f52c 100644
--- a/Documentation/devicetree/bindings/clock/hi3620-clock.txt
+++ b/Documentation/devicetree/bindings/clock/hi3620-clock.txt
@@ -7,6 +7,7 @@ Required Properties:
 
 - compatible: should be one of the following.
   - "hisilicon,hi3620-clock" - controller compatible with Hi3620 SoC.
+  - "hisilicon,hi3620-mmc-clock" - controller specific for Hi3620 mmc.
 
 - reg: physical base address of the controller and length of memory mapped
   region.
diff --git a/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
new file mode 100644
index 00000000000..fedea84314a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
@@ -0,0 +1,48 @@
+Device Tree Clock bindings for arch-moxart
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+MOXA ART SoCs allow to determine PLL output and APB frequencies
+by reading registers holding multiplier and divisor information.
+
+
+PLL:
+
+Required properties:
+- compatible : Must be "moxa,moxart-pll-clock"
+- #clock-cells : Should be 0
+- reg : Should contain registers location and length
+- clocks : Should contain phandle + clock-specifier for the parent clock
+
+Optional properties:
+- clock-output-names : Should contain clock name
+
+
+APB:
+
+Required properties:
+- compatible : Must be "moxa,moxart-apb-clock"
+- #clock-cells : Should be 0
+- reg : Should contain registers location and length
+- clocks : Should contain phandle + clock-specifier for the parent clock
+
+Optional properties:
+- clock-output-names : Should contain clock name
+
+
+For example:
+
+	clk_pll: clk_pll@98100000 {
+		compatible = "moxa,moxart-pll-clock";
+		#clock-cells = <0>;
+		reg = <0x98100000 0x34>;
+	};
+
+	clk_apb: clk_apb@98100000 {
+		compatible = "moxa,moxart-apb-clock";
+		#clock-cells = <0>;
+		reg = <0x98100000 0x34>;
+		clocks = <&clk_pll>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
index 1e662948661..307a503c5db 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
@@ -11,6 +11,18 @@ The following is a list of provided IDs and clock names on Armada 370/XP:
  3 = hclk    (DRAM control clock)
  4 = dramclk (DDR clock)
 
+The following is a list of provided IDs and clock names on Armada 375:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = l2clk   (L2 Cache clock)
+ 3 = ddrclk  (DDR clock)
+
+The following is a list of provided IDs and clock names on Armada 380/385:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = l2clk   (L2 Cache clock)
+ 3 = ddrclk  (DDR clock)
+
 The following is a list of provided IDs and clock names on Kirkwood and Dove:
  0 = tclk   (Internal Bus clock)
  1 = cpuclk (CPU0 clock)
@@ -20,6 +32,8 @@ The following is a list of provided IDs and clock names on Kirkwood and Dove:
 Required properties:
 - compatible : shall be one of the following:
 	"marvell,armada-370-core-clock" - For Armada 370 SoC core clocks
+	"marvell,armada-375-core-clock" - For Armada 375 SoC core clocks
+	"marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks
 	"marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
 	"marvell,dove-core-clock" - for Dove SoC core clocks
 	"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
index c62391fc0e3..520562a7dc2 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
@@ -4,7 +4,10 @@ The following is a list of provided IDs and clock names on Armada 370/XP:
  0 = nand (NAND clock)
 
 Required properties:
-- compatible : must be "marvell,armada-370-corediv-clock"
+- compatible : must be "marvell,armada-370-corediv-clock",
+		       "marvell,armada-375-corediv-clock",
+		       "marvell,armada-380-corediv-clock",
+
 - reg : must be the register address of Core Divider control register
 - #clock-cells : from common clock binding; shall be set to 1
 - clocks : must be set to the parent's phandle
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
index fc2910fa7e4..76477be742b 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -1,9 +1,10 @@
 * Gated Clock bindings for Marvell EBU SoCs
 
-Marvell Armada 370/XP, Dove and Kirkwood allow some peripheral clocks to be
-gated to save some power. The clock consumer should specify the desired clock
-by having the clock ID in its "clocks" phandle cell. The clock ID is directly
-mapped to the corresponding clock gating control bit in HW to ease manual clock
+Marvell Armada 370/375/380/385/XP, Dove and Kirkwood allow some
+peripheral clocks to be gated to save some power. The clock consumer
+should specify the desired clock by having the clock ID in its
+"clocks" phandle cell. The clock ID is directly mapped to the
+corresponding clock gating control bit in HW to ease manual clock
 lookup in datasheet.
 
 The following is a list of provided IDs for Armada 370:
@@ -22,6 +23,60 @@ ID	Clock	Peripheral
 28	ddr	DDR Cntrl
 30	sata1	SATA Host 0
 
+The following is a list of provided IDs for Armada 375:
+ID	Clock		Peripheral
+-----------------------------------
+2	mu		Management Unit
+3	pp		Packet Processor
+4	ptp		PTP
+5	pex0		PCIe 0 Clock out
+6	pex1		PCIe 1 Clock out
+8	audio		Audio Cntrl
+11	nd_clk		Nand Flash Cntrl
+14	sata0_link	SATA 0 Link
+15	sata0_core	SATA 0 Core
+16	usb3		USB3 Host
+17	sdio		SDHCI Host
+18	usb		USB Host
+19	gop		Gigabit Ethernet MAC
+20	sata1_link	SATA 1 Link
+21	sata1_core	SATA 1 Core
+22	xor0		XOR DMA 0
+23	xor1		XOR DMA 0
+24	copro		Coprocessor
+25	tdm		Time Division Mplx
+28	crypto0_enc	Cryptographic Unit Port 0 Encryption
+29	crypto0_core	Cryptographic Unit Port 0 Core
+30	crypto1_enc	Cryptographic Unit Port 1 Encryption
+31	crypto1_core	Cryptographic Unit Port 1 Core
+
+The following is a list of provided IDs for Armada 380/385:
+ID	Clock		Peripheral
+-----------------------------------
+0	audio		Audio
+2	ge2		Gigabit Ethernet 2
+3	ge1		Gigabit Ethernet 1
+4	ge0		Gigabit Ethernet 0
+5	pex1		PCIe 1
+6	pex2		PCIe 2
+7	pex3		PCIe 3
+8	pex0		PCIe 0
+9	usb3h0		USB3 Host 0
+10	usb3h1		USB3 Host 1
+11	usb3d		USB3 Device
+13	bm		Buffer Management
+14	crypto0z	Cryptographic 0 Z
+15	sata0		SATA 0
+16	crypto1z	Cryptographic 1 Z
+17	sdio		SDIO
+18	usb2		USB 2
+21	crypto1		Cryptographic 1
+22	xor0		XOR 0
+23	crypto0		Cryptographic 0
+25	tdm		Time Division Multiplexing
+28	xor1		XOR 1
+30	sata1		SATA 1
+
 The following is a list of provided IDs for Armada XP:
 ID	Clock	Peripheral
 -----------------------------------
@@ -95,6 +150,8 @@ ID	Clock	Peripheral
 Required properties:
 - compatible : shall be one of the following:
 	"marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating
+	"marvell,armada-375-gating-clock" - for Armada 375 SoC clock gating
+	"marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating
 	"marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating
 	"marvell,dove-gating-clock" - for Dove SoC clock gating
 	"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
new file mode 100644
index 00000000000..98a25749252
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
@@ -0,0 +1,29 @@
+* Renesas RZ Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the RZ SoCs. It includes the PLL, variable
+CPU and GPU clocks, and several fixed ratio dividers.
+
+Required Properties:
+
+  - compatible: Must be one of
+    - "renesas,r7s72100-cpg-clocks" for the r7s72100 CPG
+    - "renesas,rz-cpg-clocks" for the generic RZ CPG
+  - reg: Base address and length of the memory resource used by the CPG
+  - clocks: References to possible parent clocks. Order must match clock modes
+    in the datasheet. For the r7s72100, this is extal, usb_x1.
+  - #clock-cells: Must be 1
+  - clock-output-names: The names of the clocks. Supported clocks are "pll",
+    "i", and "g"
+
+
+Example
+-------
+
+	cpg_clocks: cpg_clocks@fcfe0000 {
+		#clock-cells = <1>;
+		compatible = "renesas,r7s72100-cpg-clocks",
+			     "renesas,rz-cpg-clocks";
+		reg = <0xfcfe0000 0x18>;
+		clocks = <&extal_clk>, <&usb_x1_clk>;
+		clock-output-names = "pll", "i", "g";
+	};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
new file mode 100644
index 00000000000..ae56315fcec
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
@@ -0,0 +1,49 @@
+Binding for a ST divider and multiplexer clock driver.
+
+This binding uses the common clock binding[1].
+Base address is located to the parent node. See clock binding[2]
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,clkgena-divmux-c65-hs",	"st,clkgena-divmux"
+	"st,clkgena-divmux-c65-ls",	"st,clkgena-divmux"
+	"st,clkgena-divmux-c32-odf0",	"st,clkgena-divmux"
+	"st,clkgena-divmux-c32-odf1",	"st,clkgena-divmux"
+	"st,clkgena-divmux-c32-odf2",	"st,clkgena-divmux"
+	"st,clkgena-divmux-c32-odf3",	"st,clkgena-divmux"
+
+- #clock-cells : From common clock binding; shall be set to 1.
+
+- clocks : From common clock binding
+
+- clock-output-names : From common clock binding.
+
+Example:
+
+	clockgenA@fd345000 {
+		reg = <0xfd345000 0xb50>;
+
+		CLK_M_A1_DIV1: CLK_M_A1_DIV1 {
+			#clock-cells = <1>;
+			compatible = "st,clkgena-divmux-c32-odf1",
+				     "st,clkgena-divmux";
+
+			clocks = <&CLK_M_A1_OSC_PREDIV>,
+				 <&CLK_M_A1_PLL0 1>, /* PLL0 PHI1 */
+				 <&CLK_M_A1_PLL1 1>; /* PLL1 PHI1 */
+
+			clock-output-names = "CLK_M_RX_ICN_TS",
+					     "CLK_M_RX_ICN_VDP_0",
+					     "", /* Unused */
+					     "CLK_M_PRV_T1_BUS",
+					     "CLK_M_ICN_REG_12",
+					     "CLK_M_ICN_REG_10",
+					     "", /* Unused */
+					     "CLK_M_ICN_ST231";
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
new file mode 100644
index 00000000000..943e0808e21
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
@@ -0,0 +1,36 @@
+Binding for a ST multiplexed clock driver.
+
+This binding supports only simple indexed multiplexers, it does not
+support table based parent index to hardware value translations.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,stih416-clkgenc-vcc-hd",	"st,clkgen-mux"
+	"st,stih416-clkgenf-vcc-fvdp",	"st,clkgen-mux"
+	"st,stih416-clkgenf-vcc-hva", 	"st,clkgen-mux"
+	"st,stih416-clkgenf-vcc-hd",	"st,clkgen-mux"
+	"st,stih416-clkgenf-vcc-sd",	"st,clkgen-mux"
+	"st,stih415-clkgen-a9-mux",	"st,clkgen-mux"
+	"st,stih416-clkgen-a9-mux",	"st,clkgen-mux"
+
+
+- #clock-cells : from common clock binding; shall be set to 0.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+Example:
+
+	CLK_M_HVA: CLK_M_HVA {
+		#clock-cells = <0>;
+		compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
+		reg = <0xfd690868 4>;
+
+		clocks = <&CLOCKGEN_F 1>, <&CLK_M_A1_DIV0 3>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
new file mode 100644
index 00000000000..81eb3855ab9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -0,0 +1,48 @@
+Binding for a ST pll clock driver.
+
+This binding uses the common clock binding[1].
+Base address is located to the parent node. See clock binding[2]
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,clkgena-prediv-c65",	"st,clkgena-prediv"
+	"st,clkgena-prediv-c32",	"st,clkgena-prediv"
+
+	"st,clkgena-plls-c65"
+	"st,plls-c32-a1x-0",		"st,clkgen-plls-c32"
+	"st,plls-c32-a1x-1",		"st,clkgen-plls-c32"
+	"st,stih415-plls-c32-a9",	"st,clkgen-plls-c32"
+	"st,stih415-plls-c32-ddr",	"st,clkgen-plls-c32"
+	"st,stih416-plls-c32-a9",	"st,clkgen-plls-c32"
+	"st,stih416-plls-c32-ddr",	"st,clkgen-plls-c32"
+
+	"st,stih415-gpu-pll-c32",	"st,clkgengpu-pll-c32"
+	"st,stih416-gpu-pll-c32",	"st,clkgengpu-pll-c32"
+
+
+- #clock-cells : From common clock binding; shall be set to 1.
+
+- clocks : From common clock binding
+
+- clock-output-names : From common clock binding.
+
+Example:
+
+	clockgenA@fee62000 {
+		reg = <0xfee62000 0xb48>;
+
+		CLK_S_A0_PLL: CLK_S_A0_PLL {
+			#clock-cells = <1>;
+			compatible = "st,clkgena-plls-c65";
+
+			clocks = <&CLK_SYSIN>;
+
+			clock-output-names = "CLK_S_A0_PLL0_HS",
+					     "CLK_S_A0_PLL0_LS",
+					     "CLK_S_A0_PLL1";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
new file mode 100644
index 00000000000..566c9d79ed3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
@@ -0,0 +1,36 @@
+Binding for a ST pre-divider clock driver.
+
+This binding uses the common clock binding[1].
+Base address is located to the parent node. See clock binding[2]
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,clkgena-prediv-c65",	"st,clkgena-prediv"
+	"st,clkgena-prediv-c32",	"st,clkgena-prediv"
+
+- #clock-cells : From common clock binding; shall be set to 0.
+
+- clocks : From common clock binding
+
+- clock-output-names : From common clock binding.
+
+Example:
+
+	clockgenA@fd345000 {
+		reg = <0xfd345000 0xb50>;
+
+		CLK_M_A2_OSC_PREDIV: CLK_M_A2_OSC_PREDIV {
+			#clock-cells = <0>;
+			compatible = "st,clkgena-prediv-c32",
+				     "st,clkgena-prediv";
+
+			clocks = <&CLK_SYSIN>;
+
+			clock-output-names = "CLK_M_A2_OSC_PREDIV";
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
new file mode 100644
index 00000000000..4e3ff28b04c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
@@ -0,0 +1,53 @@
+Binding for a type of STMicroelectronics clock crossbar (VCC).
+
+The crossbar can take up to 4 input clocks and control up to 16
+output clocks. Not all inputs or outputs have to be in use in a
+particular instantiation. Each output can be individually enabled,
+select any of the input clocks and apply a divide (by 1,2,4 or 8) to
+that selected clock.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,stih416-clkgenc",		"st,vcc"
+	"st,stih416-clkgenf",		"st,vcc"
+
+- #clock-cells : from common clock binding; shall be set to 1.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+- clock-output-names : From common clock binding. The block has 16
+                       clock outputs but not all of them in a specific instance
+                       have to be used in the SoC. If a clock name is left as
+                       an empty string then no clock will be created for the
+                       output associated with that string index. If fewer than
+                       16 strings are provided then no clocks will be created
+                       for the remaining outputs.
+
+Example:
+
+	CLOCKGEN_C_VCC: CLOCKGEN_C_VCC {
+		#clock-cells = <1>;
+		compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
+		reg = <0xfe8308ac 12>;
+
+		clocks = <&CLK_S_VCC_HD>, <&CLOCKGEN_C 1>,
+			<&CLK_S_TMDS_FROMPHY>, <&CLOCKGEN_C 2>;
+
+		clock-output-names  =
+			"CLK_S_PIX_HDMI",  "CLK_S_PIX_DVO",
+			"CLK_S_OUT_DVO",   "CLK_S_PIX_HD",
+			"CLK_S_HDDAC",     "CLK_S_DENC",
+			"CLK_S_SDDAC",     "CLK_S_PIX_MAIN",
+			"CLK_S_PIX_AUX",   "CLK_S_STFE_FRC_0",
+			"CLK_S_REF_MCRU",  "CLK_S_SLAVE_MCRU",
+			"CLK_S_TMDS_HDMI", "CLK_S_HDMI_REJECT_PLL",
+			"CLK_S_THSENS";
+	};
+
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
new file mode 100644
index 00000000000..49ec5ae18b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -0,0 +1,83 @@
+Binding for a Clockgen hardware block found on
+certain STMicroelectronics consumer electronics SoC devices.
+
+A Clockgen node can contain pll, diviser or multiplexer nodes.
+
+We will find only the base address of the Clockgen, this base
+address is common of all subnode.
+
+	clockgen_node {
+		reg = <>;
+
+		pll_node {
+			...
+		};
+
+		prediv_node {
+			...
+		};
+
+		divmux_node {
+			...
+		};
+
+		quadfs_node {
+			...
+		};
+		...
+	};
+
+This binding uses the common clock binding[1].
+Each subnode should use the binding discribe in [2]..[4]
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/st,quadfs.txt
+[3] Documentation/devicetree/bindings/clock/st,quadfs.txt
+[4] Documentation/devicetree/bindings/clock/st,quadfs.txt
+
+Required properties:
+- reg : A Base address and length of the register set.
+
+Example:
+
+	clockgenA@fee62000 {
+
+		reg = <0xfee62000 0xb48>;
+
+		CLK_S_A0_PLL: CLK_S_A0_PLL {
+			#clock-cells = <1>;
+			compatible = "st,clkgena-plls-c65";
+
+			clocks = <&CLK_SYSIN>;
+
+			clock-output-names = "CLK_S_A0_PLL0_HS",
+					     "CLK_S_A0_PLL0_LS",
+					     "CLK_S_A0_PLL1";
+		};
+
+		CLK_S_A0_OSC_PREDIV: CLK_S_A0_OSC_PREDIV {
+			#clock-cells = <0>;
+			compatible = "st,clkgena-prediv-c65",
+				     "st,clkgena-prediv";
+
+			clocks = <&CLK_SYSIN>;
+
+			clock-output-names = "CLK_S_A0_OSC_PREDIV";
+		};
+
+		CLK_S_A0_HS: CLK_S_A0_HS {
+			#clock-cells = <1>;
+			compatible = "st,clkgena-divmux-c65-hs",
+				     "st,clkgena-divmux";
+
+			clocks = <&CLK_S_A0_OSC_PREDIV>,
+				 <&CLK_S_A0_PLL 0>, /* PLL0 HS */
+				 <&CLK_S_A0_PLL 2>; /* PLL1 */
+
+			clock-output-names = "CLK_S_FDMA_0",
+					     "CLK_S_FDMA_1",
+					     ""; /* CLK_S_JIT_SENSE */
+					     /* Fourth output unused */
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
new file mode 100644
index 00000000000..ec86d62ca28
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
@@ -0,0 +1,45 @@
+Binding for a type of quad channel digital frequency synthesizer found on
+certain STMicroelectronics consumer electronics SoC devices.
+
+This version contains a programmable PLL which can generate up to 216, 432
+or 660MHz (from a 30MHz oscillator input) as the input to the digital
+synthesizers.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+  "st,stih416-quadfs216",	"st,quadfs"
+  "st,stih416-quadfs432",	"st,quadfs"
+  "st,stih416-quadfs660-E",	"st,quadfs"
+  "st,stih416-quadfs660-F",	"st,quadfs"
+
+- #clock-cells : from common clock binding; shall be set to 1.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+- clock-output-names : From common clock binding. The block has 4
+                       clock outputs but not all of them in a specific instance
+                       have to be used in the SoC. If a clock name is left as
+                       an empty string then no clock will be created for the
+                       output associated with that string index. If fewer than
+                       4 strings are provided then no clocks will be created
+                       for the remaining outputs.
+
+Example:
+
+	CLOCKGEN_E: CLOCKGEN_E {
+                #clock-cells = <1>;
+                compatible = "st,stih416-quadfs660-E", "st,quadfs";
+                reg = <0xfd3208bc 0xB0>;
+
+                clocks = <&CLK_SYSIN>;
+                clock-output-names = "CLK_M_PIX_MDTP_0",
+                                        "CLK_M_PIX_MDTP_1",
+                                        "CLK_M_PIX_MDTP_2",
+                                        "CLK_M_MPELPC";
+        };
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index c2cb7621ad2..a5160d8cbb5 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -6,37 +6,41 @@ This binding uses the common clock binding[1].
 
 Required properties:
 - compatible : shall be one of the following:
-	"allwinner,sun4i-osc-clk" - for a gatable oscillator
-	"allwinner,sun4i-pll1-clk" - for the main PLL clock and PLL4
+	"allwinner,sun4i-a10-osc-clk" - for a gatable oscillator
+	"allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4
 	"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
-	"allwinner,sun4i-pll5-clk" - for the PLL5 clock
-	"allwinner,sun4i-pll6-clk" - for the PLL6 clock
-	"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
-	"allwinner,sun4i-axi-clk" - for the AXI clock
-	"allwinner,sun4i-axi-gates-clk" - for the AXI gates
-	"allwinner,sun4i-ahb-clk" - for the AHB clock
-	"allwinner,sun4i-ahb-gates-clk" - for the AHB gates on A10
+	"allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock
+	"allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock
+	"allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
+	"allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock
+	"allwinner,sun4i-a10-axi-clk" - for the AXI clock
+	"allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates
+	"allwinner,sun4i-a10-ahb-clk" - for the AHB clock
+	"allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10
 	"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
 	"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
 	"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
 	"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
 	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
-	"allwinner,sun4i-apb0-clk" - for the APB0 clock
-	"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates on A10
+	"allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
+	"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
 	"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
 	"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
 	"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
-	"allwinner,sun4i-apb1-clk" - for the APB1 clock
-	"allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
-	"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates on A10
+	"allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
+	"allwinner,sun4i-a10-apb1-mux-clk" - for the APB1 clock muxing
+	"allwinner,sun4i-a10-apb1-gates-clk" - for the APB1 gates on A10
 	"allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
 	"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
 	"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
 	"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
 	"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
 	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
-	"allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
+	"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
 	"allwinner,sun7i-a20-out-clk" - for the external output clocks
+	"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
+	"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
+	"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
 
 Required properties for all clocks:
 - reg : shall be the control register address for the clock.
@@ -44,10 +48,17 @@ Required properties for all clocks:
 	multiplexed clocks, the list order must match the hardware
 	programming order.
 - #clock-cells : from common clock binding; shall be set to 0 except for
-	"allwinner,*-gates-clk" where it shall be set to 1
+	"allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk" and
+	"allwinner,sun4i-pll6-clk" where it shall be set to 1
+- clock-output-names : shall be the corresponding names of the outputs.
+	If the clock module only has one output, the name shall be the
+	module name.
 
-Additionally, "allwinner,*-gates-clk" clocks require:
-- clock-output-names : the corresponding gate names that the clock controls
+And "allwinner,*-usb-clk" clocks also require:
+- reset-cells : shall be set to 1
+
+For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate
+dummy clocks at 25 MHz and 125 MHz, respectively. See example.
 
 Clock consumers should specify the desired clocks they use with a
 "clocks" phandle cell. Consumers that are using a gated clock should
@@ -56,23 +67,68 @@ offset of the bit controlling this particular gate in the register.
 
 For example:
 
-osc24M: osc24M@01c20050 {
+osc24M: clk@01c20050 {
 	#clock-cells = <0>;
-	compatible = "allwinner,sun4i-osc-clk";
+	compatible = "allwinner,sun4i-a10-osc-clk";
 	reg = <0x01c20050 0x4>;
 	clocks = <&osc24M_fixed>;
+	clock-output-names = "osc24M";
 };
 
-pll1: pll1@01c20000 {
+pll1: clk@01c20000 {
 	#clock-cells = <0>;
-	compatible = "allwinner,sun4i-pll1-clk";
+	compatible = "allwinner,sun4i-a10-pll1-clk";
 	reg = <0x01c20000 0x4>;
 	clocks = <&osc24M>;
+	clock-output-names = "pll1";
+};
+
+pll5: clk@01c20020 {
+	#clock-cells = <1>;
+	compatible = "allwinner,sun4i-pll5-clk";
+	reg = <0x01c20020 0x4>;
+	clocks = <&osc24M>;
+	clock-output-names = "pll5_ddr", "pll5_other";
 };
 
 cpu: cpu@01c20054 {
 	#clock-cells = <0>;
-	compatible = "allwinner,sun4i-cpu-clk";
+	compatible = "allwinner,sun4i-a10-cpu-clk";
 	reg = <0x01c20054 0x4>;
 	clocks = <&osc32k>, <&osc24M>, <&pll1>;
+	clock-output-names = "cpu";
+};
+
+mmc0_clk: clk@01c20088 {
+	#clock-cells = <0>;
+	compatible = "allwinner,sun4i-mod0-clk";
+	reg = <0x01c20088 0x4>;
+	clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+	clock-output-names = "mmc0";
+};
+
+mii_phy_tx_clk: clk@2 {
+	#clock-cells = <0>;
+	compatible = "fixed-clock";
+	clock-frequency = <25000000>;
+	clock-output-names = "mii_phy_tx";
+};
+
+gmac_int_tx_clk: clk@3 {
+	#clock-cells = <0>;
+	compatible = "fixed-clock";
+	clock-frequency = <125000000>;
+	clock-output-names = "gmac_int_tx";
+};
+
+gmac_clk: clk@01c20164 {
+	#clock-cells = <0>;
+	compatible = "allwinner,sun7i-a20-gmac-clk";
+	reg = <0x01c20164 0x4>;
+	/*
+	 * The first clock must be fixed at 25MHz;
+	 * the second clock must be fixed at 125MHz
+	 */
+	clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+	clock-output-names = "gmac";
 };