summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2009-03-01 21:35:16 -0800
committerDavid S. Miller <davem@davemloft.net>2009-03-01 21:35:16 -0800
commitaa4abc9bcce0d2a7ec189e897f8f8c58ca04643b (patch)
tree22ef88d84a2e06380bb6a853c3ba28657e4e5f92 /Documentation
parent814c01dc7c533033b4e99981a2e24a6195bfb43c (diff)
parent52c0326beaa3cb0049d0f1c51c6ad5d4a04e4430 (diff)
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts: drivers/net/wireless/iwlwifi/iwl-tx.c net/8021q/vlan_core.c net/core/dev.c
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-bus-pci43
-rw-r--r--Documentation/dvb/README.flexcop205
-rw-r--r--Documentation/dvb/technisat.txt34
-rw-r--r--Documentation/kernel-parameters.txt10
4 files changed, 69 insertions, 223 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index ceddcff4082..e638e15a889 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -1,3 +1,46 @@
+What: /sys/bus/pci/drivers/.../bind
+Date: December 2003
+Contact: linux-pci@vger.kernel.org
+Description:
+ Writing a device location to this file will cause
+ the driver to attempt to bind to the device found at
+ this location. This is useful for overriding default
+ bindings. The format for the location is: DDDD:BB:DD.F.
+ That is Domain:Bus:Device.Function and is the same as
+ found in /sys/bus/pci/devices/. For example:
+ # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
+ (Note: kernels before 2.6.28 may require echo -n).
+
+What: /sys/bus/pci/drivers/.../unbind
+Date: December 2003
+Contact: linux-pci@vger.kernel.org
+Description:
+ Writing a device location to this file will cause the
+ driver to attempt to unbind from the device found at
+ this location. This may be useful when overriding default
+ bindings. The format for the location is: DDDD:BB:DD.F.
+ That is Domain:Bus:Device.Function and is the same as
+ found in /sys/bus/pci/devices/. For example:
+ # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
+ (Note: kernels before 2.6.28 may require echo -n).
+
+What: /sys/bus/pci/drivers/.../new_id
+Date: December 2003
+Contact: linux-pci@vger.kernel.org
+Description:
+ Writing a device ID to this file will attempt to
+ dynamically add a new device ID to a PCI device driver.
+ This may allow the driver to support more hardware than
+ was included in the driver's static device ID support
+ table at compile time. The format for the device ID is:
+ VVVV DDDD SVVV SDDD CCCC MMMM PPPP. That is Vendor ID,
+ Device ID, Subsystem Vendor ID, Subsystem Device ID,
+ Class, Class Mask, and Private Driver Data. The Vendor ID
+ and Device ID fields are required, the rest are optional.
+ Upon successfully adding an ID, the driver will probe
+ for the device and attempt to bind to it. For example:
+ # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
+
What: /sys/bus/pci/devices/.../vpd
Date: February 2008
Contact: Ben Hutchings <bhutchings@solarflare.com>
diff --git a/Documentation/dvb/README.flexcop b/Documentation/dvb/README.flexcop
deleted file mode 100644
index 5515469de7c..00000000000
--- a/Documentation/dvb/README.flexcop
+++ /dev/null
@@ -1,205 +0,0 @@
-This README escorted the skystar2-driver rewriting procedure. It describes the
-state of the new flexcop-driver set and some internals are written down here
-too.
-
-This document hopefully describes things about the flexcop and its
-device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
-drivers based on the skystar2.c and other information.
-
-Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
-touched and rewritten.
-
-History & News
-==============
- 2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
-
-
-
-
-General coding processing
-=========================
-
-We should proceed as follows (as long as no one complains):
-
-0) Think before start writing code!
-
-1) rewriting the skystar2.c with the help of the flexcop register descriptions
-and splitting up the files to a pci-bus-part and a flexcop-part.
-The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
-device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
-
-2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
-and other pci drivers)
-
-3) make some beautification (see 'Improvements when rewriting (refactoring) is
-done')
-
-4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
-a wider tester audience.
-
-5) creating an usb-bus-part using the already written flexcop code for the pci
-card.
-
-Idea: create a kernel-object for the flexcop and export all important
-functions. This option saves kernel-memory, but maybe a lot of functions have
-to be exported to kernel namespace.
-
-
-Current situation
-=================
-
-0) Done :)
-1) Done (some minor issues left)
-2) Done
-3) Not ready yet, more information is necessary
-4) next to be done (see the table below)
-5) USB driver is working (yes, there are some minor issues)
-
-What seems to be ready?
------------------------
-
-1) Rewriting
-1a) i2c is cut off from the flexcop-pci.c and seems to work
-1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
-1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
-1e) eeprom (reading MAC address)
-1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
-1f) misc. register accesses for reading parameters (e.g. resetting, revision)
-1g) pid/mac filter (flexcop-hw-filter.c)
-1i) dvb-stuff initialization in flexcop.c (done)
-1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
-1j) remove flexcop initialization from flexcop-pci.c completely (done)
-1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
-1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
-non-static where possible, moved code to proper places)
-
-2) Search for errors in the leftover of flexcop-pci.c (partially done)
-5a) add MAC address reading
-5c) feeding of ISOC data to the software demux (format of the isochronous data
-and speed optimization, no real error) (thanks to Vadim Catana)
-
-What to do in the near future?
---------------------------------------
-(no special order here)
-
-5) USB driver
-5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
-
-Testing changes
----------------
-
-O = item is working
-P = item is partially working
-X = item is not working
-N = item does not apply here
-<empty field> = item need to be examined
-
- | PCI | USB
-item | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
--------+-------+---------+---------+-------+-------+---------+---------+-------
-1a) | O | | | | N | N | N | N
-1b) | O | | | | | | O |
-1c) | N | N | | | N | N | O |
-1d) | O | O
-1e) | O | O
-1f) | P
-1g) | O
-1h) | P |
-1i) | O | N
-1j) | O | N
-1l) | O | N
-2) | O | N
-5a) | N | O
-5b)* | N |
-5c) | N | O
-
-* - not done yet
-
-Known bugs and problems and TODO
---------------------------------
-
-1g/h/l) when pid filtering is enabled on the pci card
-
-DMA usage currently:
- The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
- address and triggers an IRQ when it's full and starts writing to the second
- address. When the second address is full, the IRQ is triggered again, and
- the flexcop writes to first address again, and so on.
- The buffersize of each address is currently 640*188 bytes.
-
- Problem is, when using hw-pid-filtering and doing some low-bandwidth
- operation (like scanning) the buffers won't be filled enough to trigger
- the IRQ. That's why:
-
- When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
- is triggered. Is the current write address of DMA1 different to the one
- during the last IRQ, then the data is passed to the demuxer.
-
- There is an additional DMA-IRQ-method: packet count IRQ. This isn't
- implemented correctly yet.
-
- The solution is to disable HW PID filtering, but I don't know how the DVB
- API software demux behaves on slow systems with 45MBit/s TS.
-
-Solved bugs :)
---------------
-1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
-working)
-SOLUTION: also index 0 was affected, because net_translation is done for
-these indexes by default
-
-5b) isochronous transfer does only work in the first attempt (for the Sky2PC
-USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
-woke up again (don't know if this need fixes, see
-flexcop-fe-tuner.c:flexcop_sleep)
-
-NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
-anything in the while the driver is loaded the first time), no transfers take
-place anymore.
-
-Improvements when rewriting (refactoring) is done
-=================================================
-
-- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
- (enable sleeping for other demods than dvb-s)
-- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
-
-Debugging
----------
-- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
- with this flexcop, this is important, because i2c is now using the
- flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
- that, please tell us so).
-
-Everything which is identical in the following table, can be put into a common
-flexcop-module.
-
- PCI USB
--------------------------------------------------------------------------------
-Different:
-Register access: accessing IO memory USB control message
-I2C bus: I2C bus of the FC USB control message
-Data transfer: DMA isochronous transfer
-EEPROM transfer: through i2c bus not clear yet
-
-Identical:
-Streaming: accessing registers
-PID Filtering: accessing registers
-Sram destinations: accessing registers
-Tuner/Demod: I2C bus
-DVB-stuff: can be written for common use
-
-Acknowledgements (just for the rewriting part)
-================
-
-Bjarne Steinsbo thought a lot in the first place of the pci part for this code
-sharing idea.
-
-Andreas Oberritter for providing a recent PCI initialization template
-(pluto2.c).
-
-Boleslaw Ciesielski for pointing out a problem with firmware loader.
-
-Vadim Catana for correcting the USB transfer.
-
-comments, critics and ideas to linux-dvb@linuxtv.org.
diff --git a/Documentation/dvb/technisat.txt b/Documentation/dvb/technisat.txt
index cdf6ee4b2da..3f435ffb289 100644
--- a/Documentation/dvb/technisat.txt
+++ b/Documentation/dvb/technisat.txt
@@ -1,5 +1,5 @@
-How to set up the Technisat devices
-===================================
+How to set up the Technisat/B2C2 Flexcop devices
+================================================
1) Find out what device you have
================================
@@ -16,54 +16,60 @@ DVB: registering frontend 0 (Conexant CX24123/CX24109)...
If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one:
"Multimedia devices" => "Customise analog and hybrid tuner modules to build"
-In this directory uncheck every driver which is activated there.
+In this directory uncheck every driver which is activated there (except "Simple tuner support" for case 9 only).
Then please activate:
2a) Main module part:
a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters"
-b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card OR
+b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card
+OR
c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter
d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers"
Notice: d.) is helpful for troubleshooting
2b) Frontend module part:
-1.) Revision 2.3:
+1.) SkyStar DVB-S Revision 2.3:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based"
-2.) Revision 2.6:
+2.) SkyStar DVB-S Revision 2.6:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based"
-3.) Revision 2.7:
+3.) SkyStar DVB-S Revision 2.7:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based"
c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
-4.) Revision 2.8:
+4.) SkyStar DVB-S Revision 2.8:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based"
d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
-5.) DVB-T card:
+5.) AirStar DVB-T card:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based"
-6.) DVB-C card:
+6.) CableStar DVB-C card:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based"
-7.) ATSC card 1st generation:
+7.) AirStar ATSC card 1st generation:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510"
-8.) ATSC card 2nd generation:
+8.) AirStar ATSC card 2nd generation:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based"
-c.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
+c.)"Multimedia devices" => "Customise DVB frontends" => "Generic I2C PLL based tuners"
-Author: Uwe Bugla <uwe.bugla@gmx.de> December 2008
+9.) AirStar ATSC card 3rd generation:
+a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
+b.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
+c.)"Multimedia devices" => "Customise analog and hybrid tuner modules to build" => "Simple tuner support"
+
+Author: Uwe Bugla <uwe.bugla@gmx.de> February 2009
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 319785b6dcb..54f21a5c262 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -114,7 +114,7 @@ In addition, the following text indicates that the option:
Parameters denoted with BOOT are actually interpreted by the boot
loader, and have no meaning to the kernel directly.
Do not modify the syntax of boot loader parameters without extreme
-need or coordination with <Documentation/x86/i386/boot.txt>.
+need or coordination with <Documentation/x86/boot.txt>.
There are also arch-specific kernel-parameters not documented here.
See for example <Documentation/x86/x86_64/boot-options.txt>.
@@ -868,8 +868,10 @@ and is between 256 and 4096 characters. It is defined in the file
icn= [HW,ISDN]
Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
- ide= [HW] (E)IDE subsystem
- Format: ide=nodma or ide=doubler
+ ide-core.nodma= [HW] (E)IDE subsystem
+ Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
+ .vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom
+ .chs .ignore_cable are additional options
See Documentation/ide/ide.txt.
idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed
@@ -2449,7 +2451,7 @@ and is between 256 and 4096 characters. It is defined in the file
See Documentation/fb/modedb.txt.
vga= [BOOT,X86-32] Select a particular video mode
- See Documentation/x86/i386/boot.txt and
+ See Documentation/x86/boot.txt and
Documentation/svga.txt.
Use vga=ask for menu.
This is actually a boot loader parameter; the value is