diff options
| author | Rajendra Nayak <rnayak@ti.com> | 2012-03-12 20:32:37 +0530 |
|---|---|---|
| committer | Chris Ball <cjb@laptop.org> | 2012-03-27 12:20:09 -0400 |
| commit | 46856a68dcb5f67c779d211fd6bcb5d7a2a7f19b (patch) | |
| tree | 9c89099550263e3b4d7178d3869f6fcdb0d0ab5b /Documentation | |
| parent | f3c55a7b5d7f2d40c805a62174bb733b55875523 (diff) | |
mmc: omap_hsmmc: Convert hsmmc driver to use device tree
Define dt bindings for the ti-omap-hsmmc, and adapt the driver to extract
data (which was earlier passed as platform_data) from device tree.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt | 33 |
1 files changed, 33 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt new file mode 100644 index 00000000000..dbd4368ab8c --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -0,0 +1,33 @@ +* TI Highspeed MMC host controller for OMAP + +The Highspeed MMC Host Controller on TI OMAP family +provides an interface for MMC, SD, and SDIO types of memory cards. + +Required properties: +- compatible: + Should be "ti,omap2-hsmmc", for OMAP2 controllers + Should be "ti,omap3-hsmmc", for OMAP3 controllers + Should be "ti,omap4-hsmmc", for OMAP4 controllers +- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1 +- reg : should contain hsmmc registers location and length + +Optional properties: +ti,dual-volt: boolean, supports dual voltage cards +<supply-name>-supply: phandle to the regulator device tree node +"supply-name" examples are "vmmc", "vmmc_aux" etc +ti,bus-width: Number of data lines, default assumed is 1 if the property is missing. +cd-gpios: GPIOs for card detection +wp-gpios: GPIOs for write protection +ti,non-removable: non-removable slot (like eMMC) +ti,needs-special-reset: Requires a special softreset sequence + +Example: + mmc1: mmc@0x4809c000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,bus-width = <4>; + vmmc-supply = <&vmmc>; /* phandle to regulator node */ + ti,non-removable; + }; |