Merge tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC update from Chris Ball:
 "MMC highlights for 3.16:

  Core:
   - support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v
   - if card init at 3.3v doesn't work, try 1.8v and 1.2v too

  Drivers:
   - moxart: New driver for MOXA ART SoCs
   - rtsx_usb_sdmmc: New driver for Realtek USB card readers
   - sdhci: Large rework around IRQ/regulator handling, remove card_tasklet
   - sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
   - sunxi: New driver for Allwinner sunxi SoCs
   - usdhi6rol0: New driver for Renesas SD/SDIO controller"

* tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (95 commits)
  mmc: sdhci-s3c: use mmc_of_parse and remove the card_tasklet
  mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller
  mmc: sdhci-of-esdhc: Fixup compile error
  mmc: tegra: fix reporting of base clock frequency
  mmc: tegra: disable UHS modes
  mmc: sdhci-dove: use mmc_of_parse() and remove card_tasklet CD handler
  MAINTAINERS: mmc: Add path to git tree
  mmc: dove: fix missing MACH_DOVE dependency
  mmc: sdhci: SD tuning is broken for some controllers
  mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue
  mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
  mmc: omap_hsmmc: split omap-dma header file
  mmc: omap_hsmmc: fix cmd23 multiblock read/write
  mmc: omap_hsmmc: use devm_ioremap_resource
  mmc: omap_hsmmc: use devm_request_threaded_irq
  mmc: omap_hsmmc: use devm_request_irq
  mmc: omap_hsmmc: use devm_clk_get
  mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
  mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded value
  mmc: omap: Use DIV_ROUND_UP instead of open coded
  ...

4 files changed, 65 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 9dce540771f..3c18001dfd5 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -38,6 +38,8 @@ Optional properties:
 - mmc-highspeed-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported
 - mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported
 - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
+- mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported
+- mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"
diff --git a/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt b/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt
new file mode 100644
index 00000000000..b63819149f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt
@@ -0,0 +1,30 @@
+MOXA ART MMC Host Controller Interface
+
+  Inherits from mmc binding[1].
+
+  [1] Documentation/devicetree/bindings/mmc/mmc.txt
+
+Required properties:
+
+- compatible :	Must be "moxa,moxart-mmc" or "faraday,ftsdc010"
+- reg :		Should contain registers location and length
+- interrupts :	Should contain the interrupt number
+- clocks :	Should contain phandle for the clock feeding the MMC controller
+
+Optional properties:
+
+- dmas :	Should contain two DMA channels, line request number must be 5 for
+		both channels
+- dma-names :	Must be "tx", "rx"
+
+Example:
+
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
+		reg = <0x98e00000 0x5C>;
+		interrupts = <5 0>;
+		clocks = <&clk_apb>;
+		dmas =  <&dma 5>,
+			<&dma 5>;
+		dma-names = "tx", "rx";
+	};
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index 8f3f1331535..2d4a7258a10 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -69,10 +69,6 @@ Optional properties:
 
 * supports-highspeed: Enables support for high speed cards (up to 50MHz)
 
-* caps2-mmc-hs200-1_8v: Supports mmc HS200 SDR 1.8V mode
-
-* caps2-mmc-hs200-1_2v: Supports mmc HS200 SDR 1.2V mode
-
 * broken-cd: as documented in mmc core bindings.
 
 * vmmc-supply: The phandle to the regulator to use for vmmc.  If this is
@@ -103,7 +99,6 @@ board specific portions as listed below.
 		clock-freq-min-max = <400000 200000000>;
 		num-slots = <1>;
 		supports-highspeed;
-		caps2-mmc-hs200-1_8v;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
diff --git a/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt
new file mode 100644
index 00000000000..8babdaa8623
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt
@@ -0,0 +1,33 @@
+* Renesas usdhi6rol0 SD/SDIO host controller
+
+Required properties:
+
+- compatible:	must be
+		"renesas,usdhi6rol0"
+- interrupts:	3 interrupts, named "card detect", "data" and "SDIO" must be
+		specified
+- clocks:	a clock binding for the IMCLK input
+
+Optional properties:
+
+- vmmc-supply:	a phandle of a regulator, supplying Vcc to the card
+- vqmmc-supply:	a phandle of a regulator, supplying VccQ to the card
+
+Additionally any standard mmc bindings from mmc.txt can be used.
+
+Example:
+
+sd0: sd@ab000000 {
+	compatible = "renesas,usdhi6rol0";
+	reg = <0xab000000 0x200>;
+	interrupts = <0 23 0x4
+		      0 24 0x4
+		      0 25 0x4>;
+	interrupt-names = "card detect", "data", "SDIO";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-power-off-card;
+	clocks = <&imclk>;
+	vmmc-supply = <&vcc_sd0>;
+	vqmmc-supply = <&vccq_sd0>;
+};