Merge tag 'regulator-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A respin of the merges in the previous pull request with one extra
  fix.

  A quiet release for the regulator API, quite a large number of small
  improvements all over but other than the addition of new drivers for
  the AS3722 and MAX14577 there is nothing of substantial non-local
  impact"

* tag 'regulator-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (47 commits)
  regulator: pfuze100-regulator: Improve dev_info() message
  regulator: pfuze100-regulator: Fix some checkpatch complaints
  regulator: twl: Fix checkpatch issue
  regulator: core: Fix checkpatch issue
  regulator: anatop-regulator: Remove unneeded memset()
  regulator: s5m8767: Update LDO index in s5m8767-regulator.txt
  regulator: as3722: set enable time for SD0/1/6
  regulator: as3722: detect SD0 low-voltage mode
  regulator: tps62360: Fix up a pointer-integer size mismatch warning
  regulator: anatop-regulator: Remove unneeded kstrdup()
  regulator: act8865: Fix build error when !OF
  regulator: act8865: register all regulators regardless of how many are used
  regulator: wm831x-dcdc: Remove unneeded 'err' label
  regulator: anatop-regulator: Add MODULE_ALIAS()
  regulator: act8865: fix incorrect devm_kzalloc for act8865
  regulator: act8865: Remove set_suspend_[en|dis]able implementation
  regulator: act8865: Remove unneeded regulator_unregister() calls
  regulator: s2mps11: Clean up redundant code
  regulator: tps65910: Simplify setting enable_mask for regulators
  regulator: act8865: add device tree binding doc
  ...

4 files changed, 64 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt
index 2e3304888ff..b4bd98af1cc 100644
--- a/Documentation/devicetree/bindings/mfd/tps65910.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65910.txt
@@ -21,7 +21,7 @@ Required properties:
 
   The valid regulator-compatible values are:
   tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
-            vaux2, vaux33, vmmc
+            vaux2, vaux33, vmmc, vbb
   tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
             ldo6, ldo7, ldo8
 
@@ -38,7 +38,7 @@ Required properties:
 	vcc4-supply: VAUX1 and VAUX2 input.
 	vcc5-supply: VPLL and VDAC input.
 	vcc6-supply: VDIG1 and VDIG2 input.
-	vcc7-supply: VRTC input.
+	vcc7-supply: VRTC and VBB input.
 	vccio-supply: VIO input.
   tps65911:
 	vcc1-supply: VDD1 input.
diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
new file mode 100644
index 00000000000..bef1fbb647c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
@@ -0,0 +1,60 @@
+ACT8865 regulator
+-------------------
+
+Required properties:
+- compatible: "active-semi,act8865"
+- reg: I2C slave address
+
+Any standard regulator properties can be used to configure the single regulator.
+
+The valid names for regulators are:
+	DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
+
+Example:
+--------
+
+		i2c1: i2c@f0018000 {
+			pmic: act8865@5b {
+				compatible = "active-semi,act8865";
+				reg = <0x5b>;
+				status = "disabled";
+
+				regulators {
+					vcc_1v8_reg: DCDC_REG1 {
+						regulator-name = "VCC_1V8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+					};
+
+					vcc_1v2_reg: DCDC_REG2 {
+						regulator-name = "VCC_1V2";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1300000>;
+						regulator-suspend-mem-microvolt = <1150000>;
+						regulator-suspend-standby-microvolt = <1150000>;
+						regulator-always-on;
+					};
+
+					vcc_3v3_reg: DCDC_REG3 {
+						regulator-name = "VCC_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+					};
+
+					vddana_reg: LDO_REG1 {
+						regulator-name = "VDDANA";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+					};
+
+					vddfuse_reg: LDO_REG2 {
+						regulator-name = "FUSE_2V5";
+						regulator-min-microvolt = <2500000>;
+						regulator-max-microvolt = <2500000>;
+					};
+				};
+			};
+		};
diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
index d1660a90fc0..fc6b38f035b 100644
--- a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
@@ -83,7 +83,7 @@ as per the datasheet of s5m8767.
 
 	- LDOn
 		  - valid values for n are 1 to 28
-		  - Example: LDO0, LD01, LDO28
+		  - Example: LDO1, LD02, LDO28
 	- BUCKn
 		  - valid values for n are 1 to 9.
 		  - Example: BUCK1, BUCK2, BUCK9
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 5780ffcd79a..3f900cd51bf 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -3,6 +3,7 @@ Device tree binding vendor prefix registry.  Keep list in alphabetical order.
 This isn't an exhaustive list, but you should add new prefixes to it before
 using them to avoid name-space collisions.
 
+active-semi	Active-Semi International Inc
 ad	Avionic Design GmbH
 adi	Analog Devices, Inc.
 aeroflexgaisler	Aeroflex Gaisler AB